Skip to contentSkip to conversation

nvme-tcp: wait socket wmem to drain in queue stop

PATCH In review Michael Liang 2 participants 3 messages Apr 24, 2025 – Apr 25, 2025 NVMe

lore
Share & tools
lore
#0 lore raw

v3 cover nvme-tcp: wait socket wmem to drain in queue stop

Changes in v3:
- Use nowait to stop all queues first then wait;
- Check queue allocation flag in wait to avoid accessing after free;
- Link to v2: https://lore.kernel.org/linux-nvme/[email protected]/

Michael Liang (1):
nvme-tcp: wait socket wmem to drain in queue stop

 drivers/nvme/host/tcp.c | 31 +++++++++++++++++++++++++++++--
 1 file changed, 29 insertions(+), 2 deletions(-)
Signature · 1 line
2.34.1
#1 lore raw

PATCH v3 1/1 nvme-tcp: wait socket wmem to drain in queue stop

This patch addresses a data corruption issue observed in nvme-tcp during testing.

Issue description:
In an NVMe native multipath setup, when an I/O timeout occurs, all inflight I/Os are canceled almost immediately after the kernel socket is shut down. These canceled I/Os are reported as host path errors, triggering a failover that succeeds on a different path.

However, at this point, the original I/O may still be outstanding in the host's network transmission path (e.g., the NIC’s TX queue). From the user-space app's perspective, the buffer associated with the I/O is considered completed since they're acked on the different path and may be reused for new I/O requests.

Because nvme-tcp enables zero-copy by default in the transmission path, this can lead to corrupted data being sent to the original target, ultimately causing data corruption.

We can reproduce this data corruption by injecting delay on one path and triggering i/o timeout.

To prevent this issue, this change ensures that all inflight transmissions are fully completed from host's perspective before returning from queue stop. To handle concurrent I/O timeout from multiple namespaces under the same controller, always wait in queue stop regardless of queue's state.

This aligns with the behavior of queue stopping in other NVMe fabric transports.

---
 drivers/nvme/host/tcp.c | 31 +++++++++++++++++++++++++++++--
 1 file changed, 29 insertions(+), 2 deletions(-)
drivers/nvme/host/tcp.c +29 -2
index 26c459f0198d..8571bb7c029d 100644
@@ -1944,7 +1944,7 @@ static void __nvme_tcp_stop_queue(struct nvme_tcp_queue *queue)
 	cancel_work_sync(&queue->io_work);
 }
 
-static void nvme_tcp_stop_queue(struct nvme_ctrl *nctrl, int qid)
+static void nvme_tcp_stop_queue_nowait(struct nvme_ctrl *nctrl, int qid)
 {
 	struct nvme_tcp_ctrl *ctrl = to_tcp_ctrl(nctrl);
 	struct nvme_tcp_queue *queue = &ctrl->queues[qid];
@@ -1963,6 +1963,31 @@ static void nvme_tcp_stop_queue(struct nvme_ctrl *nctrl, int qid)
 	mutex_unlock(&queue->queue_lock);
 }
 
+static void nvme_tcp_wait_queue(struct nvme_ctrl *nctrl, int qid)
+{
+	struct nvme_tcp_ctrl *ctrl = to_tcp_ctrl(nctrl);
+	struct nvme_tcp_queue *queue = &ctrl->queues[qid];
+	int timeout = 100;
+
+	while (timeout > 0) {
+		if (!test_bit(NVME_TCP_Q_ALLOCATED, &queue->flags) ||
+		    !sk_wmem_alloc_get(queue->sock->sk))
+			return;
+		msleep(2);
+		timeout -= 2;
+	}
+	dev_warn(nctrl->device,
+		 "qid %d: timeout draining sock wmem allocation expired\n",
+		 qid);
+}
+
+static void nvme_tcp_stop_queue(struct nvme_ctrl *nctrl, int qid)
+{
+	nvme_tcp_stop_queue_nowait(nctrl, qid);
+	nvme_tcp_wait_queue(nctrl, qid);
+}
+
+
 static void nvme_tcp_setup_sock_ops(struct nvme_tcp_queue *queue)
 {
 	write_lock_bh(&queue->sock->sk->sk_callback_lock);
@@ -2030,7 +2055,9 @@ static void nvme_tcp_stop_io_queues(struct nvme_ctrl *ctrl)
 	int i;
 
 	for (i = 1; i < ctrl->queue_count; i++)
-		nvme_tcp_stop_queue(ctrl, i);
+		nvme_tcp_stop_queue_nowait(ctrl, i);
+	for (i = 1; i < ctrl->queue_count; i++)
+		nvme_tcp_wait_queue(ctrl, i);
 }
 
 static int nvme_tcp_start_io_queues(struct nvme_ctrl *ctrl,
Signature · 1 line
2.34.1
maintainer Reviewed-by on v3 1/1
#2 lore raw

Given that this is a fix - lets rename the patch title to say that.

nvme-tcp: fix possible data corruption caused by premature queue removal and I/O failover

Quoted 22 lines · Michael Liang

This patch addresses a data corruption issue observed in nvme-tcp during testing.

Issue description:
In an NVMe native multipath setup, when an I/O timeout occurs, all inflight I/Os are canceled almost immediately after the kernel socket is shut down. These canceled I/Os are reported as host path errors, triggering a failover that succeeds on a different path.

However, at this point, the original I/O may still be outstanding in the host's network transmission path (e.g., the NIC’s TX queue). From the user-space app's perspective, the buffer associated with the I/O is considered completed since they're acked on the different path and may be reused for new I/O requests.

Because nvme-tcp enables zero-copy by default in the transmission path, this can lead to corrupted data being sent to the original target, ultimately causing data corruption.

We can reproduce this data corruption by injecting delay on one path and triggering i/o timeout.

Quoted 6 lines

To prevent this issue, this change ensures that all inflight transmissions are fully completed from host's perspective before returning from queue stop. To handle concurrent I/O timeout from multiple namespaces under the same controller, always wait in queue stop regardless of queue's state.

This aligns with the behavior of queue stopping in other NVMe fabric transports.

We need a "Fixes: " tag, even if it goes all the way to day-0...

Quoted 4 lines

Please resend, but you can add to your v4