Skip to contentSkip to conversation

tools/nolibc: Add m68k support

PATCH Superseded Daniel Palmer 2 participants 2 messages Apr 26, 2025

Subsystems (2)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 tools/nolibc: Add m68k support

From: Daniel Palmer <[email protected]>

Add nolibc support for m68k. Should be helpful for nommu where linking libc can bloat even hello world to the point where you get an OOM just trying to load it.

---
 tools/include/nolibc/arch-m68k.h            | 141 ++++++++++++++++++++
 tools/include/nolibc/arch.h                 |   2 +
 tools/testing/selftests/nolibc/Makefile     |   5 +
 tools/testing/selftests/nolibc/run-tests.sh |   1 +
 4 files changed, 149 insertions(+)
 create mode 100644 tools/include/nolibc/arch-m68k.h
tools/include/nolibc/arch-m68k.h new file +141 -0
new file mode 100644
index 000000000000..6dac1845f298
@@ -0,0 +1,141 @@
+/* SPDX-License-Identifier: LGPL-2.1 OR MIT */
+/*
+ * m68k specific definitions for NOLIBC
+ * Copyright (C) 2025 Daniel Palmer<[email protected]>
+ *
+ * Roughly based on one or more of the other arch files.
+ *
+ */
+
+#ifndef _NOLIBC_ARCH_M68K_H
+#define _NOLIBC_ARCH_M68K_H
+
+#include "compiler.h"
+#include "crt.h"
+
+#define _NOLIBC_SYSCALL_CLOBBERLIST "memory"
+
+#define my_syscall0(num)                                                      \
+({                                                                            \
+	register long _num __asm__ ("d0") = (num);                            \
+									      \
+	__asm__ volatile (                                                    \
+		"trap #0\n"                                                   \
+		: "+r"(_num)                                                  \
+		: "r"(_num)                                                   \
+		: _NOLIBC_SYSCALL_CLOBBERLIST                                 \
+	);                                                                    \
+	_num;                                                                 \
+})
+
+#define my_syscall1(num, arg1)                                                \
+({                                                                            \
+	register long _num __asm__ ("d0") = (num);                            \
+	register long _arg1 __asm__ ("d1") = (long)(arg1);                    \
+									      \
+	__asm__ volatile (                                                    \
+		"trap #0\n"                                                   \
+		: "+r"(_num)                                                  \
+		: "r"(_arg1)                                                  \
+		: _NOLIBC_SYSCALL_CLOBBERLIST                                 \
+	);                                                                    \
+	_num;                                                                 \
+})
+
+#define my_syscall2(num, arg1, arg2)                                          \
+({                                                                            \
+	register long _num __asm__ ("d0") = (num);                            \
+	register long _arg1 __asm__ ("d1") = (long)(arg1);                    \
+	register long _arg2 __asm__ ("d2") = (long)(arg2);                    \
+									      \
+	__asm__ volatile (                                                    \
+		"trap #0\n"                                                   \
+		: "+r"(_num)                                                  \
+		: "r"(_arg1), "r"(_arg2)                                      \
+		: _NOLIBC_SYSCALL_CLOBBERLIST                                 \
+	);                                                                    \
+	_num;                                                                 \
+})
+
+#define my_syscall3(num, arg1, arg2, arg3)                                    \
+({                                                                            \
+	register long _num __asm__ ("d0")  = (num);                           \
+	register long _arg1 __asm__ ("d1") = (long)(arg1);                    \
+	register long _arg2 __asm__ ("d2") = (long)(arg2);                    \
+	register long _arg3 __asm__ ("d3") = (long)(arg3);                    \
+									      \
+	__asm__ volatile (                                                    \
+		"trap #0\n"                                                   \
+		: "+r"(_num)                                                  \
+		: "r"(_arg1), "r"(_arg2), "r"(_arg3)                          \
+		: _NOLIBC_SYSCALL_CLOBBERLIST                                 \
+	);                                                                    \
+	_num;                                                                 \
+})
+
+#define my_syscall4(num, arg1, arg2, arg3, arg4)                              \
+({                                                                            \
+	register long _num __asm__ ("d0") = (num);                            \
+	register long _arg1 __asm__ ("d1") = (long)(arg1);                    \
+	register long _arg2 __asm__ ("d2") = (long)(arg2);                    \
+	register long _arg3 __asm__ ("d3") = (long)(arg3);                    \
+	register long _arg4 __asm__ ("d4") = (long)(arg4);                    \
+									      \
+	__asm__ volatile (                                                    \
+		"trap #0\n"                                                   \
+		: "+r" (_num)                                                 \
+		: "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4)              \
+		: _NOLIBC_SYSCALL_CLOBBERLIST                                 \
+	);                                                                    \
+	_num;                                                                 \
+})
+
+#define my_syscall5(num, arg1, arg2, arg3, arg4, arg5)                        \
+({                                                                            \
+	register long _num __asm__ ("d0") = (num);                            \
+	register long _arg1 __asm__ ("d1") = (long)(arg1);                    \
+	register long _arg2 __asm__ ("d2") = (long)(arg2);                    \
+	register long _arg3 __asm__ ("d3") = (long)(arg3);                    \
+	register long _arg4 __asm__ ("d4") = (long)(arg4);                    \
+	register long _arg5 __asm__ ("d5") = (long)(arg5);                    \
+									      \
+	__asm__ volatile (                                                    \
+		"trap #0\n"                                                   \
+		: "+r" (_num)                                                 \
+		: "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5)  \
+		: _NOLIBC_SYSCALL_CLOBBERLIST                                 \
+	);                                                                    \
+	_num;                                                                 \
+})
+
+#define my_syscall6(num, arg1, arg2, arg3, arg4, arg5, arg6)                  \
+({                                                                            \
+	register long _num __asm__ ("d0")  = (num);                           \
+	register long _arg1 __asm__ ("d1") = (long)(arg1);                    \
+	register long _arg2 __asm__ ("d2") = (long)(arg2);                    \
+	register long _arg3 __asm__ ("d3") = (long)(arg3);                    \
+	register long _arg4 __asm__ ("d4") = (long)(arg4);                    \
+	register long _arg5 __asm__ ("d5") = (long)(arg5);                    \
+	register long _arg6 __asm__ ("a0") = (long)(arg6);                    \
+									      \
+	__asm__ volatile (                                                    \
+		"trap #0\n"                                                   \
+		: "+r" (_num)                                                 \
+		: "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \
+		  "r"(_arg6)                                                  \
+		: _NOLIBC_SYSCALL_CLOBBERLIST                                 \
+	);                                                                    \
+	_num;                                                                 \
+})
+
+void _start(void);
+void __attribute__((weak, noreturn)) __nolibc_entrypoint __no_stack_protector _start(void)
+{
+	__asm__ volatile (
+		"movel %sp, %sp@-\n"
+		"jsr _start_c\n"
+	);
+	__nolibc_entrypoint_epilogue();
+}
+
+#endif /* _NOLIBC_ARCH_M68K_H */
tools/include/nolibc/arch.h +2 -0
index 8a2c143c0fba..ba3da0f098f1 100644
@@ -33,6 +33,8 @@
 #include "arch-s390.h"
 #elif defined(__loongarch__)
 #include "arch-loongarch.h"
+#elif defined(__m68k__)
+#include "arch-m68k.h"
 #else
 #error Unsupported Architecture
 #endif
tools/testing/selftests/nolibc/Makefile +5 -0
index 58bcbbd029bc..2d6bbd8eb213 100644
@@ -76,6 +76,7 @@ IMAGE_riscv64    = arch/riscv/boot/Image
 IMAGE_s390x      = arch/s390/boot/bzImage
 IMAGE_s390       = arch/s390/boot/bzImage
 IMAGE_loongarch  = arch/loongarch/boot/vmlinuz.efi
+IMAGE_m68k       = vmlinux
 IMAGE            = $(objtree)/$(IMAGE_$(XARCH))
 IMAGE_NAME       = $(notdir $(IMAGE))
 
@@ -97,8 +98,10 @@ DEFCONFIG_riscv64    = defconfig
 DEFCONFIG_s390x      = defconfig
 DEFCONFIG_s390       = defconfig compat.config
 DEFCONFIG_loongarch  = defconfig
+DEFCONFIG_m68k       = virt_defconfig
 DEFCONFIG            = $(DEFCONFIG_$(XARCH))
 
+EXTRACONFIG_m68k      = -e CONFIG_BLK_DEV_INITRD
 EXTRACONFIG           = $(EXTRACONFIG_$(XARCH))
 
 # optional tests to run (default = all)
@@ -122,6 +125,7 @@ QEMU_ARCH_riscv64    = riscv64
 QEMU_ARCH_s390x      = s390x
 QEMU_ARCH_s390       = s390x
 QEMU_ARCH_loongarch  = loongarch64
+QEMU_ARCH_m68k       = m68k
 QEMU_ARCH            = $(QEMU_ARCH_$(XARCH))
 
 QEMU_ARCH_USER_ppc64le = ppc64le
@@ -152,6 +156,7 @@ QEMU_ARGS_riscv64    = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_T
 QEMU_ARGS_s390x      = -M s390-ccw-virtio -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)"
 QEMU_ARGS_s390       = -M s390-ccw-virtio -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)"
 QEMU_ARGS_loongarch  = -M virt -append "console=ttyS0,115200 panic=-1 $(TEST:%=NOLIBC_TEST=%)"
+QEMU_ARGS_m68k       = -M virt -append "console=ttyGF0,115200 panic=-1 $(TEST:%=NOLIBC_TEST=%)"
 QEMU_ARGS            = -m 1G $(QEMU_ARGS_$(XARCH)) $(QEMU_ARGS_BIOS) $(QEMU_ARGS_EXTRA)
 
 # OUTPUT is only set when run from the main makefile, otherwise
tools/testing/selftests/nolibc/run-tests.sh +1 -0
index 0299a0912d40..ba90c0b8c482 100755
@@ -25,6 +25,7 @@ all_archs=(
 	riscv32 riscv64
 	s390x s390
 	loongarch
+	m68k
 )
 archs="${all_archs[@]}"
 
Signature · 1 line
2.49.0
#1 lore raw

Hi!

Quoted 5 lines · Daniel Palmer

From: Daniel Palmer <[email protected]>

Add nolibc support for m68k. Should be helpful for nommu where linking libc can bloat even hello world to the point where you get an OOM just trying to load it.

Thanks for the patch, it does look good in general.
Could you rebase it onto the nolibc next branch [0] for easier application? Also normal clang does not support m68k yet, so it should be skipped in run-tests.sh in the llvm case.
As for mmu vs nommu, this choice has no impact on the userspace application itself, right? If so, having only one configuration in the nolibc testsuite should be enough.

[0] https://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc.git/log/?h=next

Quoted 9 lines
---
 tools/include/nolibc/arch-m68k.h            | 141 ++++++++++++++++++++
 tools/include/nolibc/arch.h                 |   2 +
 tools/testing/selftests/nolibc/Makefile     |   5 +
 tools/testing/selftests/nolibc/run-tests.sh |   1 +
 4 files changed, 149 insertions(+)
 create mode 100644 tools/include/nolibc/arch-m68k.h

<snip>