Skip to contentSkip to conversation

lib: utils/irqchip: always parse msi information for each aplic device

PATCH Superseded Inochi Amaoto 2 participants 3 messages Apr 28, 2025 – May 20, 2025

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 lib: utils/irqchip: always parse msi information for each aplic device

OpenSBI only parses MSI information of the first next level subdomain for now, which makes the root domain misconfigured in some case:
1. the msi is not enabled on the first subdomain of the root domain, but other subdomains enable MSI.
2. the root domain is set as direct mode, but its subdomains enable MSI.

So it is needed to parse all child of the root domain, Otherwise, the some non-root domains are broken. As the specification says, it is safe to parse the MSI information of all its subdomain and write the msiaddrcfg register of the non root domain as they are read only.

Parse the aplic MSI information recursively for all aplic device.

---
Changed from v1:
1. update comment
2. remove unnecessary header import

---
 lib/utils/fdt/fdt_helper.c | 136 ++++++++++++++++++-------------------
 1 file changed, 67 insertions(+), 69 deletions(-)
lib/utils/fdt/fdt_helper.c +67 -69
index 8939d90..eeab326 100644
@@ -602,13 +602,56 @@ int fdt_parse_xlnx_uartlite_node(const void *fdt, int nodeoffset,
 	return fdt_parse_uart_node_common(fdt, nodeoffset, uart, 0, 0);
 }
 
+static int fdt_aplic_find_imsic_node(const void *fdt, int nodeoff, struct imsic_data *imsic, bool mmode)
+{
+	const fdt32_t *val;
+	int i, len, noff, rc;
+
+	val = fdt_getprop(fdt, nodeoff, "msi-parent", &len);
+	if (val && len >= sizeof(fdt32_t)) {
+		noff = fdt_node_offset_by_phandle(fdt, fdt32_to_cpu(*val));
+		if (noff < 0)
+			return noff;
+
+		rc = fdt_parse_imsic_node(fdt, noff, imsic);
+		if (rc)
+			return rc;
+
+		rc = imsic_data_check(imsic);
+		if (rc)
+			return rc;
+
+		if (imsic->targets_mmode == mmode) {
+			return 0;
+		}
+	}
+
+	val = fdt_getprop(fdt, nodeoff, "riscv,children", &len);
+	if (!val || len < sizeof(fdt32_t))
+		return SBI_ENODEV;
+
+	len /= sizeof(fdt32_t);
+
+	for (i = 0; i < len; i++) {
+		noff = fdt_node_offset_by_phandle(fdt, fdt32_to_cpu(val[i]));
+		if (noff < 0)
+			return noff;
+
+		rc = fdt_aplic_find_imsic_node(fdt, noff, imsic, mmode);
+		if (!rc)
+			break;
+	}
+
+	return rc;
+}
+
 int fdt_parse_aplic_node(const void *fdt, int nodeoff, struct aplic_data *aplic)
 {
 	bool child_found;
 	const fdt32_t *val;
 	const fdt32_t *del;
 	struct imsic_data imsic = { 0 };
-	int i, j, d, dcnt, len, noff, rc;
+	int i, j, d, dcnt, len, rc;
 	uint64_t reg_addr, reg_size;
 	struct aplic_delegate_data *deleg;
 
@@ -635,78 +678,33 @@ int fdt_parse_aplic_node(const void *fdt, int nodeoff, struct aplic_data *aplic)
 			}
 		}
 		aplic->num_idc = len / 2;
-		goto aplic_msi_parent_done;
 	}
 
-	val = fdt_getprop(fdt, nodeoff, "msi-parent", &len);
-	if (val && len >= sizeof(fdt32_t)) {
-		noff = fdt_node_offset_by_phandle(fdt, fdt32_to_cpu(*val));
-		if (noff < 0)
-			return noff;
-
-		rc = fdt_parse_imsic_node(fdt, noff, &imsic);
-		if (rc)
-			return rc;
-
-		rc = imsic_data_check(&imsic);
-		if (rc)
-			return rc;
-
-		aplic->targets_mmode = imsic.targets_mmode;
-
-		if (imsic.targets_mmode) {
-			aplic->has_msicfg_mmode = true;
-			aplic->msicfg_mmode.lhxs = imsic.guest_index_bits;
-			aplic->msicfg_mmode.lhxw = imsic.hart_index_bits;
-			aplic->msicfg_mmode.hhxw = imsic.group_index_bits;
-			aplic->msicfg_mmode.hhxs = imsic.group_index_shift;
-			if (aplic->msicfg_mmode.hhxs <
-					(2 * IMSIC_MMIO_PAGE_SHIFT))
-				return SBI_EINVAL;
-			aplic->msicfg_mmode.hhxs -= 24;
-			aplic->msicfg_mmode.base_addr = imsic.regs[0].addr;
-		} else {
-			goto aplic_msi_parent_done;
-		}
-
-		val = fdt_getprop(fdt, nodeoff, "riscv,children", &len);
-		if (!val || len < sizeof(fdt32_t))
-			goto aplic_msi_parent_done;
-
-		noff = fdt_node_offset_by_phandle(fdt, fdt32_to_cpu(*val));
-		if (noff < 0)
-			return noff;
-
-		val = fdt_getprop(fdt, noff, "msi-parent", &len);
-		if (!val || len < sizeof(fdt32_t))
-			goto aplic_msi_parent_done;
-
-		noff = fdt_node_offset_by_phandle(fdt, fdt32_to_cpu(*val));
-		if (noff < 0)
-			return noff;
-
-		rc = fdt_parse_imsic_node(fdt, noff, &imsic);
-		if (rc)
-			return rc;
-
-		rc = imsic_data_check(&imsic);
-		if (rc)
-			return rc;
+	rc = fdt_aplic_find_imsic_node(fdt, nodeoff, &imsic, true);
+	if (!rc) {
+		aplic->has_msicfg_mmode = true;
+		aplic->msicfg_mmode.lhxs = imsic.guest_index_bits;
+		aplic->msicfg_mmode.lhxw = imsic.hart_index_bits;
+		aplic->msicfg_mmode.hhxw = imsic.group_index_bits;
+		aplic->msicfg_mmode.hhxs = imsic.group_index_shift;
+		if (aplic->msicfg_mmode.hhxs < (2 * IMSIC_MMIO_PAGE_SHIFT))
+			return SBI_EINVAL;
+		aplic->msicfg_mmode.hhxs -= 24;
+		aplic->msicfg_mmode.base_addr = imsic.regs[0].addr;
+	}
 
-		if (!imsic.targets_mmode) {
-			aplic->has_msicfg_smode = true;
-			aplic->msicfg_smode.lhxs = imsic.guest_index_bits;
-			aplic->msicfg_smode.lhxw = imsic.hart_index_bits;
-			aplic->msicfg_smode.hhxw = imsic.group_index_bits;
-			aplic->msicfg_smode.hhxs = imsic.group_index_shift;
-			if (aplic->msicfg_smode.hhxs <
-					(2 * IMSIC_MMIO_PAGE_SHIFT))
-				return SBI_EINVAL;
-			aplic->msicfg_smode.hhxs -= 24;
-			aplic->msicfg_smode.base_addr = imsic.regs[0].addr;
-		}
+	rc = fdt_aplic_find_imsic_node(fdt, nodeoff, &imsic, false);
+	if (!rc) {
+		aplic->has_msicfg_smode = true;
+		aplic->msicfg_smode.lhxs = imsic.guest_index_bits;
+		aplic->msicfg_smode.lhxw = imsic.hart_index_bits;
+		aplic->msicfg_smode.hhxw = imsic.group_index_bits;
+		aplic->msicfg_smode.hhxs = imsic.group_index_shift;
+		if (aplic->msicfg_smode.hhxs < (2 * IMSIC_MMIO_PAGE_SHIFT))
+			return SBI_EINVAL;
+		aplic->msicfg_smode.hhxs -= 24;
+		aplic->msicfg_smode.base_addr = imsic.regs[0].addr;
 	}
-aplic_msi_parent_done:
 
 	for (d = 0; d < APLIC_MAX_DELEGATE; d++) {
 		deleg = &aplic->delegate[d];

--
2.49.0

Signature · 3 lines
opensbi mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/opensbi
#1 lore raw
Quoted 44 lines · Inochi Amaoto

OpenSBI only parses MSI information of the first next level subdomain for now, which makes the root domain misconfigured in some case:
1. the msi is not enabled on the first subdomain of the root domain, but other subdomains enable MSI.
2. the root domain is set as direct mode, but its subdomains enable MSI.

So it is needed to parse all child of the root domain, Otherwise, the some non-root domains are broken. As the specification says, it is safe to parse the MSI information of all its subdomain and write the msiaddrcfg register of the non root domain as they are read only.

Parse the aplic MSI information recursively for all aplic device.

---
Changed from v1:
1. update comment
2. remove unnecessary header import

---
 lib/utils/fdt/fdt_helper.c | 136 ++++++++++++++++++-------------------
 1 file changed, 67 insertions(+), 69 deletions(-)
lib/utils/fdt/fdt_helper.c +13 -0
index 8939d90..eeab326 100644
@@ -602,13 +602,56 @@ int fdt_parse_xlnx_uartlite_node(const void *fdt, int nodeoffset,
        return fdt_parse_uart_node_common(fdt, nodeoffset, uart, 0, 0);
 }
 
+static int fdt_aplic_find_imsic_node(const void *fdt, int nodeoff, struct imsic_data *imsic, bool mmode)
+{
+       const fdt32_t *val;
+       int i, len, noff, rc;
+
+       val = fdt_getprop(fdt, nodeoff, "msi-parent", &len);
+       if (val && len >= sizeof(fdt32_t)) {
+               noff = fdt_node_offset_by_phandle(fdt, fdt32_to_cpu(*val));
+               if (noff < 0)
+                       return noff;
+
+               rc = fdt_parse_imsic_node(fdt, noff, imsic);
+               if (rc)

lib/utils/fdt/fdt_helper.c int fdt_parse_xlnx_uartlite_node(const void *fdt, int nodeoffset, · line 627

Quoted 10 lines
lib/utils/fdt/fdt_helper.c +10 -0
+                       return rc;
+
+               rc = imsic_data_check(imsic);
+               if (rc)
+                       return rc;
+
+               if (imsic->targets_mmode == mmode) {
+                       return 0;
+               }
+       }

this should be:

if (val && len >= sizeof(fdt32_t)) {
    ...
} else {
    return SBI_ENODEV;
}
Quoted 43 lines
lib/utils/fdt/fdt_helper.c +21 -7
+
+       val = fdt_getprop(fdt, nodeoff, "riscv,children", &len);
+       if (!val || len < sizeof(fdt32_t))
+               return SBI_ENODEV;
+
+       len /= sizeof(fdt32_t);
+
+       for (i = 0; i < len; i++) {
+               noff = fdt_node_offset_by_phandle(fdt, fdt32_to_cpu(val[i]));
+               if (noff < 0)
+                       return noff;
+
+               rc = fdt_aplic_find_imsic_node(fdt, noff, imsic, mmode);
+               if (!rc)
+                       break;
+       }
+
+       return rc;
+}
+
 int fdt_parse_aplic_node(const void *fdt, int nodeoff, struct aplic_data *aplic)
 {
        bool child_found;
        const fdt32_t *val;
        const fdt32_t *del;
        struct imsic_data imsic = { 0 };
-       int i, j, d, dcnt, len, noff, rc;
+       int i, j, d, dcnt, len, rc;
        uint64_t reg_addr, reg_size;
        struct aplic_delegate_data *deleg;
 
@@ -635,78 +678,33 @@ int fdt_parse_aplic_node(const void *fdt, int nodeoff, struct aplic_data *aplic)
                        }
                }
                aplic->num_idc = len / 2;
-               goto aplic_msi_parent_done;
        }
 
-       val = fdt_getprop(fdt, nodeoff, "msi-parent", &len);
-       if (val && len >= sizeof(fdt32_t)) {
-               noff = fdt_node_offset_by_phandle(fdt, fdt32_to_cpu(*val));
-               if (noff < 0)
-                       return noff;

lib/utils/fdt/fdt_helper.c int fdt_parse_aplic_node(const void *fdt, int nodeoff, struct aplic_data *aplic) · line 655

Quoted 10 lines
lib/utils/fdt/fdt_helper.c +0 -10
-
-               rc = fdt_parse_imsic_node(fdt, noff, &imsic);
-               if (rc)
-                       return rc;
-
-               rc = imsic_data_check(&imsic);
-               if (rc)
-                       return rc;
-
-               aplic->targets_mmode = imsic.targets_mmode;

I don't see "aplic->targets_mmode" being set below.

Quoted 84 lines
lib/utils/fdt/fdt_helper.c +23 -53
-
-               if (imsic.targets_mmode) {
-                       aplic->has_msicfg_mmode = true;
-                       aplic->msicfg_mmode.lhxs = imsic.guest_index_bits;
-                       aplic->msicfg_mmode.lhxw = imsic.hart_index_bits;
-                       aplic->msicfg_mmode.hhxw = imsic.group_index_bits;
-                       aplic->msicfg_mmode.hhxs = imsic.group_index_shift;
-                       if (aplic->msicfg_mmode.hhxs <
-                                       (2 * IMSIC_MMIO_PAGE_SHIFT))
-                               return SBI_EINVAL;
-                       aplic->msicfg_mmode.hhxs -= 24;
-                       aplic->msicfg_mmode.base_addr = imsic.regs[0].addr;
-               } else {
-                       goto aplic_msi_parent_done;
-               }
-
-               val = fdt_getprop(fdt, nodeoff, "riscv,children", &len);
-               if (!val || len < sizeof(fdt32_t))
-                       goto aplic_msi_parent_done;
-
-               noff = fdt_node_offset_by_phandle(fdt, fdt32_to_cpu(*val));
-               if (noff < 0)
-                       return noff;
-
-               val = fdt_getprop(fdt, noff, "msi-parent", &len);
-               if (!val || len < sizeof(fdt32_t))
-                       goto aplic_msi_parent_done;
-
-               noff = fdt_node_offset_by_phandle(fdt, fdt32_to_cpu(*val));
-               if (noff < 0)
-                       return noff;
-
-               rc = fdt_parse_imsic_node(fdt, noff, &imsic);
-               if (rc)
-                       return rc;
-
-               rc = imsic_data_check(&imsic);
-               if (rc)
-                       return rc;
+       rc = fdt_aplic_find_imsic_node(fdt, nodeoff, &imsic, true);
+       if (!rc) {
+               aplic->has_msicfg_mmode = true;
+               aplic->msicfg_mmode.lhxs = imsic.guest_index_bits;
+               aplic->msicfg_mmode.lhxw = imsic.hart_index_bits;
+               aplic->msicfg_mmode.hhxw = imsic.group_index_bits;
+               aplic->msicfg_mmode.hhxs = imsic.group_index_shift;
+               if (aplic->msicfg_mmode.hhxs < (2 * IMSIC_MMIO_PAGE_SHIFT))
+                       return SBI_EINVAL;
+               aplic->msicfg_mmode.hhxs -= 24;
+               aplic->msicfg_mmode.base_addr = imsic.regs[0].addr;
+       }
 
-               if (!imsic.targets_mmode) {
-                       aplic->has_msicfg_smode = true;
-                       aplic->msicfg_smode.lhxs = imsic.guest_index_bits;
-                       aplic->msicfg_smode.lhxw = imsic.hart_index_bits;
-                       aplic->msicfg_smode.hhxw = imsic.group_index_bits;
-                       aplic->msicfg_smode.hhxs = imsic.group_index_shift;
-                       if (aplic->msicfg_smode.hhxs <
-                                       (2 * IMSIC_MMIO_PAGE_SHIFT))
-                               return SBI_EINVAL;
-                       aplic->msicfg_smode.hhxs -= 24;
-                       aplic->msicfg_smode.base_addr = imsic.regs[0].addr;
-               }
+       rc = fdt_aplic_find_imsic_node(fdt, nodeoff, &imsic, false);
+       if (!rc) {
+               aplic->has_msicfg_smode = true;
+               aplic->msicfg_smode.lhxs = imsic.guest_index_bits;
+               aplic->msicfg_smode.lhxw = imsic.hart_index_bits;
+               aplic->msicfg_smode.hhxw = imsic.group_index_bits;
+               aplic->msicfg_smode.hhxs = imsic.group_index_shift;
+               if (aplic->msicfg_smode.hhxs < (2 * IMSIC_MMIO_PAGE_SHIFT))
+                       return SBI_EINVAL;
+               aplic->msicfg_smode.hhxs -= 24;
+               aplic->msicfg_smode.base_addr = imsic.regs[0].addr;
        }
-aplic_msi_parent_done:
 
        for (d = 0; d < APLIC_MAX_DELEGATE; d++) {
                deleg = &aplic->delegate[d];
--

2.49.0

Quoted 4 lines

--
opensbi mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/opensbi

Regards,
Anup

Signature · 3 lines
opensbi mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/opensbi
#2 lore raw
Quoted 111 lines · Anup Patel
Quoted 44 lines · Inochi Amaoto

OpenSBI only parses MSI information of the first next level subdomain for now, which makes the root domain misconfigured in some case:
1. the msi is not enabled on the first subdomain of the root domain, but other subdomains enable MSI.
2. the root domain is set as direct mode, but its subdomains enable MSI.

So it is needed to parse all child of the root domain, Otherwise, the some non-root domains are broken. As the specification says, it is safe to parse the MSI information of all its subdomain and write the msiaddrcfg register of the non root domain as they are read only.

Parse the aplic MSI information recursively for all aplic device.

---
Changed from v1:
1. update comment
2. remove unnecessary header import

---
 lib/utils/fdt/fdt_helper.c | 136 ++++++++++++++++++-------------------
 1 file changed, 67 insertions(+), 69 deletions(-)
lib/utils/fdt/fdt_helper.c +13 -0
index 8939d90..eeab326 100644
@@ -602,13 +602,56 @@ int fdt_parse_xlnx_uartlite_node(const void *fdt, int nodeoffset,
        return fdt_parse_uart_node_common(fdt, nodeoffset, uart, 0, 0);
 }
 
+static int fdt_aplic_find_imsic_node(const void *fdt, int nodeoff, struct imsic_data *imsic, bool mmode)
+{
+       const fdt32_t *val;
+       int i, len, noff, rc;
+
+       val = fdt_getprop(fdt, nodeoff, "msi-parent", &len);
+       if (val && len >= sizeof(fdt32_t)) {
+               noff = fdt_node_offset_by_phandle(fdt, fdt32_to_cpu(*val));
+               if (noff < 0)
+                       return noff;
+
+               rc = fdt_parse_imsic_node(fdt, noff, imsic);
+               if (rc)

lib/utils/fdt/fdt_helper.c int fdt_parse_xlnx_uartlite_node(const void *fdt, int nodeoffset, · line 627

Quoted 10 lines
lib/utils/fdt/fdt_helper.c +10 -0
+                       return rc;
+
+               rc = imsic_data_check(imsic);
+               if (rc)
+                       return rc;
+
+               if (imsic->targets_mmode == mmode) {
+                       return 0;
+               }
+       }

this should be:

if (val && len >= sizeof(fdt32_t)) {
    ...
} else {
    return SBI_ENODEV;
}
Quoted 47 lines
lib/utils/fdt/fdt_helper.c +21 -11
+
+       val = fdt_getprop(fdt, nodeoff, "riscv,children", &len);
+       if (!val || len < sizeof(fdt32_t))
+               return SBI_ENODEV;
+
+       len /= sizeof(fdt32_t);
+
+       for (i = 0; i < len; i++) {
+               noff = fdt_node_offset_by_phandle(fdt, fdt32_to_cpu(val[i]));
+               if (noff < 0)
+                       return noff;
+
+               rc = fdt_aplic_find_imsic_node(fdt, noff, imsic, mmode);
+               if (!rc)
+                       break;
+       }
+
+       return rc;
+}
+
 int fdt_parse_aplic_node(const void *fdt, int nodeoff, struct aplic_data *aplic)
 {
        bool child_found;
        const fdt32_t *val;
        const fdt32_t *del;
        struct imsic_data imsic = { 0 };
-       int i, j, d, dcnt, len, noff, rc;
+       int i, j, d, dcnt, len, rc;
        uint64_t reg_addr, reg_size;
        struct aplic_delegate_data *deleg;
 
@@ -635,78 +678,33 @@ int fdt_parse_aplic_node(const void *fdt, int nodeoff, struct aplic_data *aplic)
                        }
                }
                aplic->num_idc = len / 2;
-               goto aplic_msi_parent_done;
        }
 
-       val = fdt_getprop(fdt, nodeoff, "msi-parent", &len);
-       if (val && len >= sizeof(fdt32_t)) {
-               noff = fdt_node_offset_by_phandle(fdt, fdt32_to_cpu(*val));
-               if (noff < 0)
-                       return noff;
-
-               rc = fdt_parse_imsic_node(fdt, noff, &imsic);
-               if (rc)
-                       return rc;
Quoted 9 lines

lib/utils/fdt/fdt_helper.c int fdt_parse_aplic_node(const void *fdt, int nodeoff, struct aplic_data *aplic) · line 655

Quoted 6 lines
lib/utils/fdt/fdt_helper.c +0 -6
-
-               rc = imsic_data_check(&imsic);
-               if (rc)
-                       return rc;
-
-               aplic->targets_mmode = imsic.targets_mmode;

I don't see "aplic->targets_mmode" being set below.

I forgot to add this, I think I should add a "aplic->targets_mmode" in the m-mode fdt_aplic_find_imsic_node check.

Regards,
Inochi

Quoted 91 lines
Quoted 84 lines
lib/utils/fdt/fdt_helper.c +23 -53
-
-               if (imsic.targets_mmode) {
-                       aplic->has_msicfg_mmode = true;
-                       aplic->msicfg_mmode.lhxs = imsic.guest_index_bits;
-                       aplic->msicfg_mmode.lhxw = imsic.hart_index_bits;
-                       aplic->msicfg_mmode.hhxw = imsic.group_index_bits;
-                       aplic->msicfg_mmode.hhxs = imsic.group_index_shift;
-                       if (aplic->msicfg_mmode.hhxs <
-                                       (2 * IMSIC_MMIO_PAGE_SHIFT))
-                               return SBI_EINVAL;
-                       aplic->msicfg_mmode.hhxs -= 24;
-                       aplic->msicfg_mmode.base_addr = imsic.regs[0].addr;
-               } else {
-                       goto aplic_msi_parent_done;
-               }
-
-               val = fdt_getprop(fdt, nodeoff, "riscv,children", &len);
-               if (!val || len < sizeof(fdt32_t))
-                       goto aplic_msi_parent_done;
-
-               noff = fdt_node_offset_by_phandle(fdt, fdt32_to_cpu(*val));
-               if (noff < 0)
-                       return noff;
-
-               val = fdt_getprop(fdt, noff, "msi-parent", &len);
-               if (!val || len < sizeof(fdt32_t))
-                       goto aplic_msi_parent_done;
-
-               noff = fdt_node_offset_by_phandle(fdt, fdt32_to_cpu(*val));
-               if (noff < 0)
-                       return noff;
-
-               rc = fdt_parse_imsic_node(fdt, noff, &imsic);
-               if (rc)
-                       return rc;
-
-               rc = imsic_data_check(&imsic);
-               if (rc)
-                       return rc;
+       rc = fdt_aplic_find_imsic_node(fdt, nodeoff, &imsic, true);
+       if (!rc) {
+               aplic->has_msicfg_mmode = true;
+               aplic->msicfg_mmode.lhxs = imsic.guest_index_bits;
+               aplic->msicfg_mmode.lhxw = imsic.hart_index_bits;
+               aplic->msicfg_mmode.hhxw = imsic.group_index_bits;
+               aplic->msicfg_mmode.hhxs = imsic.group_index_shift;
+               if (aplic->msicfg_mmode.hhxs < (2 * IMSIC_MMIO_PAGE_SHIFT))
+                       return SBI_EINVAL;
+               aplic->msicfg_mmode.hhxs -= 24;
+               aplic->msicfg_mmode.base_addr = imsic.regs[0].addr;
+       }
 
-               if (!imsic.targets_mmode) {
-                       aplic->has_msicfg_smode = true;
-                       aplic->msicfg_smode.lhxs = imsic.guest_index_bits;
-                       aplic->msicfg_smode.lhxw = imsic.hart_index_bits;
-                       aplic->msicfg_smode.hhxw = imsic.group_index_bits;
-                       aplic->msicfg_smode.hhxs = imsic.group_index_shift;
-                       if (aplic->msicfg_smode.hhxs <
-                                       (2 * IMSIC_MMIO_PAGE_SHIFT))
-                               return SBI_EINVAL;
-                       aplic->msicfg_smode.hhxs -= 24;
-                       aplic->msicfg_smode.base_addr = imsic.regs[0].addr;
-               }
+       rc = fdt_aplic_find_imsic_node(fdt, nodeoff, &imsic, false);
+       if (!rc) {
+               aplic->has_msicfg_smode = true;
+               aplic->msicfg_smode.lhxs = imsic.guest_index_bits;
+               aplic->msicfg_smode.lhxw = imsic.hart_index_bits;
+               aplic->msicfg_smode.hhxw = imsic.group_index_bits;
+               aplic->msicfg_smode.hhxs = imsic.group_index_shift;
+               if (aplic->msicfg_smode.hhxs < (2 * IMSIC_MMIO_PAGE_SHIFT))
+                       return SBI_EINVAL;
+               aplic->msicfg_smode.hhxs -= 24;
+               aplic->msicfg_smode.base_addr = imsic.regs[0].addr;
        }
-aplic_msi_parent_done:
 
        for (d = 0; d < APLIC_MAX_DELEGATE; d++) {
                deleg = &aplic->delegate[d];
--

2.49.0

Quoted 4 lines

--
opensbi mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/opensbi

Regards,
Anup

Signature · 3 lines
opensbi mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/opensbi