dt-bindings: interrupt-controller: Convert marvell,armada-8k-pic to DT schema
Subsystems (2)
Rob Herring (Arm)
maintainerPATCH 1/1 dt-bindings: interrupt-controller: Convert marvell,armada-8k-pic to DT schema
Convert the Marvell 7K/8K PIC interrupt controller binding to schema format. It's a straight-forward conversion of the typical interrupt controller.
Signed-off-by Rob Herring (Arm) <[email protected]>
--- .../marvell,armada-8k-pic.txt | 25 --------- .../marvell,armada-8k-pic.yaml | 52 +++++++++++++++++++ 2 files changed, 52 insertions(+), 25 deletions(-) delete mode 100644 Documentation/devicetree/bindings/interrupt-controller/marvell,armada-8k-pic.txt create mode 100644 Documentation/devicetree/bindings/interrupt-controller/marvell,armada-8k-pic.yaml
Documentation/devicetree/bindings/interrupt-controller/marvell,armada-8k-pic.txt deleted +0 -25
@@ -1,25 +0,0 @@ -Marvell Armada 7K/8K PIC Interrupt controller ---------------------------------------------- - -This is the Device Tree binding for the PIC, a secondary interrupt -controller available on the Marvell Armada 7K/8K ARM64 SoCs, and -typically connected to the GIC as the primary interrupt controller. - -Required properties: -- compatible: should be "marvell,armada-8k-pic" -- interrupt-controller: identifies the node as an interrupt controller -- #interrupt-cells: the number of cells to define interrupts on this - controller. Should be 1 -- reg: the register area for the PIC interrupt controller -- interrupts: the interrupt to the primary interrupt controller, - typically the GIC - -Example: - - pic: interrupt-controller@3f0100 { - compatible = "marvell,armada-8k-pic"; - reg = <0x3f0100 0x10>; - #interrupt-cells = <1>; - interrupt-controller; - interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; - };
Documentation/devicetree/bindings/interrupt-controller/marvell,armada-8k-pic.yaml new file +52 -0
52 lines not on this page · raw message
Signature · 1 line
2.47.2