Allocate payload arrays dynamically
Subsystems (4)
[email protected]
maintainerv5 cover Allocate payload arrays dynamically
From: Chuck Lever <[email protected]>
In order to make RPCSVC_MAXPAYLOAD larger (or variable in size), we need to do something clever with the payload arrays embedded in struct svc_rqst and elsewhere.
My preference is to keep these arrays allocated all the time because allocating them on demand increases the risk of a memory allocation failure during a large I/O. This is a quick-and-dirty approach that might be replaced once NFSD is converted to use large folios.
The downside of this design choice is that it pins a few pages per NFSD thread (and that's the current situation already). But note that because RPCSVC_MAXPAGES is 259, each array is just over a page in size, making the allocation waste quite a bit of memory beyond the end of the array due to power-of-2 allocator round up. This gets worse as the MAXPAGES value is doubled or quadrupled.
This series also addresses similar issues in the socket and RDMA transports.
Changes since v4:
* Replace the use of rq_vec instead of allocating it dynamically
Changes since v3:
* Improved the rdma_rw context count estimate
* Dropped "NFSD: Remove NFSSVC_MAXBLKSIZE from .pc_xdrressize"
* Cleaned up the max size macros a bit
* Completed the implementation of adjustable max_block_size
Changes since v2:
* Address Jeff's review comments
* Address Neil's review comments
* Start removing a few uses of NFSSVC_MAXBLKSIZE
Chuck Lever (19):
svcrdma: Reduce the number of rdma_rw contexts per-QP
sunrpc: Add a helper to derive maxpages from sv_max_mesg
sunrpc: Remove backchannel check in svc_init_buffer()
sunrpc: Replace the rq_pages array with dynamically-allocated memory
sunrpc: Replace the rq_bvec array with dynamically-allocated memory
NFSD: Use rqstp->rq_bvec in nfsd_iter_read()
NFSD: De-duplicate the svc_fill_write_vector() call sites
SUNRPC: Export xdr_buf_to_bvec()
NFSD: Use rqstp->rq_bvec in nfsd_iter_write()
SUNRPC: Remove svc_fill_write_vector()
SUNRPC: Remove svc_rqst :: rq_vec
sunrpc: Adjust size of socket's receive page array dynamically
svcrdma: Adjust the number of entries in svc_rdma_recv_ctxt::rc_pages
svcrdma: Adjust the number of entries in svc_rdma_send_ctxt::sc_pages
sunrpc: Remove the RPCSVC_MAXPAGES macro
NFSD: Remove NFSD_BUFSIZE
NFSD: Remove NFSSVC_MAXBLKSIZE_V2 macro
NFSD: Add a "default" block size
SUNRPC: Bump the maximum payload size for the server
fs/nfsd/nfs3proc.c | 5 +- fs/nfsd/nfs4proc.c | 10 +-- fs/nfsd/nfs4state.c | 2 +- fs/nfsd/nfs4xdr.c | 2 +- fs/nfsd/nfsd.h | 24 +++---- fs/nfsd/nfsproc.c | 13 ++-- fs/nfsd/nfssvc.c | 2 +- fs/nfsd/nfsxdr.c | 4 +- fs/nfsd/vfs.c | 67 ++++++++++++++------ fs/nfsd/vfs.h | 10 +-- include/linux/sunrpc/svc.h | 46 ++++++++------ include/linux/sunrpc/svc_rdma.h | 6 +- include/linux/sunrpc/svcsock.h | 4 +- net/sunrpc/svc.c | 80 +++++++----------------- net/sunrpc/svc_xprt.c | 10 +-- net/sunrpc/svcsock.c | 15 +++-- net/sunrpc/xdr.c | 1 + net/sunrpc/xprtrdma/svc_rdma_recvfrom.c | 8 ++- net/sunrpc/xprtrdma/svc_rdma_rw.c | 2 +- net/sunrpc/xprtrdma/svc_rdma_sendto.c | 16 ++++- net/sunrpc/xprtrdma/svc_rdma_transport.c | 14 +++-- 21 files changed, 170 insertions(+), 171 deletions(-)
Signature · 1 line
2.49.0
[email protected]
maintainerPATCH v5 1/19 svcrdma: Reduce the number of rdma_rw contexts per-QP
From: Chuck Lever <[email protected]>
There is an upper bound on the number of rdma_rw contexts that can be created per QP.
This invisible upper bound is because rdma_create_qp() adds one or more additional SQEs for each ctxt that the ULP requests via qp_attr.cap.max_rdma_ctxs. The QP's actual Send Queue length is on the order of the sum of qp_attr.cap.max_send_wr and a factor times qp_attr.cap.max_rdma_ctxs. The factor can be up to three, depending on whether MR operations are required before RDMA Reads.
This limit is not visible to RDMA consumers via dev->attrs. When the limit is surpassed, QP creation fails with -ENOMEM. For example:
svcrdma's estimate of the number of rdma_rw contexts it needs is three times the number of pages in RPCSVC_MAXPAGES. When MAXPAGES is about 260, the internally-computed SQ length should be:
64 credits + 10 backlog + 3 * (3 * 260) = 2414
Which is well below the advertised qp_max_wr of 32768.
If RPCSVC_MAXPAGES is increased to 4MB, that's 1040 pages:
64 credits + 10 backlog + 3 * (3 * 1040) = 9434
However, QP creation fails. Dynamic printk for mlx5 shows:
calc_sq_size:618:(pid 1514): send queue size (9326 * 256 / 64 -> 65536) exceeds limits(32768)
Although 9326 is still far below qp_max_wr, QP creation still fails.
Because the total SQ length calculation is opaque to RDMA consumers, there doesn't seem to be much that can be done about this except for consumers to try to keep the requested rdma_rw ctxt count low.
--- net/sunrpc/xprtrdma/svc_rdma_transport.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
net/sunrpc/xprtrdma/svc_rdma_transport.c +8 -6
@@ -406,12 +406,12 @@ static void svc_rdma_xprt_done(struct rpcrdma_notification *rn)*/ static struct svc_xprt *svc_rdma_accept (struct svc_xprt *xprt) { +unsigned int ctxts, rq_depth, maxpayload;struct svcxprt_rdma *listen_rdma;struct svcxprt_rdma *newxprt =NULL ;struct rdma_conn_param conn_param;struct rpcrdma_connect_private pmsg;struct ib_qp_init_attr qp_attr; -unsigned int ctxts, rq_depth;struct ib_device *dev;int ret =0 ; RPC_IFDEBUG(struct sockaddr *sap);
@@ -462,12 +462,14 @@ static struct svc_xprt *svc_rdma_accept(struct svc_xprt *xprt) newxprt->sc_max_bc_requests =2 ; } -/* Arbitrarily estimate the number of rw_ctxs needed for -* this transport. This is enough rw_ctxs to make forward -* progress even if the client is using one rkey per page -* in each Read chunk. +/* Arbitrary estimate of the needed number of rdma_rw contexts. */ - ctxts =3 *RPCSVC_MAXPAGES ; + maxpayload =min (xprt->xpt_server->sv_max_payload, +RPCSVC_MAXPAYLOAD_RDMA ); + ctxts = newxprt->sc_max_requests *3 * +rdma_rw_mr_factor (dev, newxprt->sc_port_num, + maxpayload >>PAGE_SHIFT ); + newxprt->sc_sq_depth = rq_depth + ctxts;if (newxprt->sc_sq_depth > dev->attrs.max_qp_wr) newxprt->sc_sq_depth = dev->attrs.max_qp_wr;
Signature · 1 line
2.49.0
[email protected]
maintainerPATCH v5 2/19 sunrpc: Add a helper to derive maxpages from sv_max_mesg
In reply to [email protected]From: Chuck Lever <[email protected]>
This page count is to be used to allocate various arrays of pages and bio_vecs, replacing the fixed RPCSVC_MAXPAGES value.
The documenting comment is somewhat stale -- of course NFSv4 COMPOUND procedures may have multiple payloads.
--- include/linux/sunrpc/svc.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
include/linux/sunrpc/svc.h +17 -0
@@ -159,6 +159,23 @@ extern u32 svc_max_payload(const struct svc_rqst *rqstp);#define RPCSVC_MAXPAGES ((RPCSVC_MAXPAYLOAD+PAGE_SIZE-1)/PAGE_SIZE \ + 2 + 1) +/** +* svc_serv_maxpages - maximum count of pages needed for one RPC message +* @serv: RPC service context +* +* Returns a count of pages or vectors that can hold the maximum +* size RPC message for @serv. +* +* Each request/reply pair can have at most one "payload", plus two +* pages, one for the request, and one for the reply. +* nfsd_splice_actor() might need an extra page when a READ payload +* is not page-aligned. +*/ +static inline unsigned long svc_serv_maxpages (const struct svc_serv *serv) +{ +return DIV_ROUND_UP (serv->sv_max_mesg,PAGE_SIZE ) +2 +1 ; +} +/* * The context of a single thread, including the request currently being * processed.
Signature · 1 line
2.49.0
[email protected]
maintainerPATCH v5 3/19 sunrpc: Remove backchannel check in svc_init_buffer()
In reply to [email protected]From: Chuck Lever <[email protected]>
The server's backchannel uses struct svc_rqst, but does not use the pages in svc_rqst::rq_pages. It's rq_arg::pages and rq_res::pages comes from the RPC client's page allocator. Currently, svc_init_buffer() skips allocating pages in rq_pages for that reason.
Except that, svc_rqst::rq_pages is filled anyway when a backchannel svc_rqst is passed to svc_recv() -> and then to svc_alloc_arg().
This isn't really a problem at the moment, except that these pages are allocated but then never used, as far as I can tell.
The problem is that later in this series, in addition to populating the entries of rq_pages[], svc_init_buffer() will also allocate the memory underlying the rq_pages[] array itself. If that allocation is skipped, then svc_alloc_args() chases a NULL pointer for ingress backchannel requests.
This approach avoids introducing extra conditional logic in svc_alloc_args(), which is a hot path.
--- net/sunrpc/svc.c | 4 ---- 1 file changed, 4 deletions(-)
net/sunrpc/svc.c +0 -4
@@ -640,10 +640,6 @@ svc_init_buffer(struct svc_rqst *rqstp, unsigned int size, int node) {unsigned long pages, ret; -/* bc_xprt uses fore channel allocated buffers */ -if (svc_is_backchannel (rqstp)) -return true; - pages = size /PAGE_SIZE +1 ;/* extra page as we hold both request and reply. * We assume one is at most one page */
Signature · 1 line
2.49.0
[email protected]
maintainerPATCH v5 4/19 sunrpc: Replace the rq_pages array with dynamically-allocated memory
In reply to [email protected]From: Chuck Lever <[email protected]>
As a step towards making NFSD's maximum rsize and wsize variable at run-time, replace the fixed-size rq_vec[] array in struct svc_rqst with a chunk of dynamically-allocated memory.
On a system with 8-byte pointers and 4KB pages, pahole reports that the rq_pages[] array is 2080 bytes. This patch replaces that with a single 8-byte pointer field.
--- include/linux/sunrpc/svc.h | 3 ++- net/sunrpc/svc.c | 31 +++++++++++++++++-------------- net/sunrpc/svc_xprt.c | 10 +--------- net/sunrpc/xprtrdma/svc_rdma_rw.c | 2 +- 4 files changed, 21 insertions(+), 25 deletions(-)
include/linux/sunrpc/svc.h +2 -1
@@ -205,7 +205,8 @@ struct svc_rqst {struct xdr_stream rq_res_stream;struct page *rq_scratch_page;struct xdr_buf rq_res; -struct page *rq_pages[RPCSVC_MAXPAGES +1 ]; +unsigned long rq_maxpages;/* num of entries in rq_pages */ +struct page * *rq_pages;struct page * *rq_respages;/* points into rq_pages */ struct page * *rq_next_page;/* next reply page to use */ struct page * *rq_page_end;/* one past the last page */
net/sunrpc/svc.c +17 -14
@@ -636,20 +636,22 @@ svc_destroy(struct svc_serv **servp)EXPORT_SYMBOL_GPL (svc_destroy);static bool -svc_init_buffer (struct svc_rqst *rqstp,unsigned int size,int node) +svc_init_buffer (struct svc_rqst *rqstp,const struct svc_serv *serv,int node) { -unsigned long pages, ret; +unsigned long ret; - pages = size /PAGE_SIZE +1 ;/* extra page as we hold both request and reply. -* We assume one is at most one page -*/ -WARN_ON_ONCE (pages >RPCSVC_MAXPAGES ); -if (pages >RPCSVC_MAXPAGES ) - pages =RPCSVC_MAXPAGES ; + rqstp->rq_maxpages =svc_serv_maxpages (serv); - ret =alloc_pages_bulk_node (GFP_KERNEL , node, pages, +/* rq_pages' last entry is NULL for historical reasons. */ + rqstp->rq_pages =kcalloc_node (rqstp->rq_maxpages +1 , +sizeof (struct page *), +GFP_KERNEL , node); +if (!rqstp->rq_pages) +return false; + + ret =alloc_pages_bulk_node (GFP_KERNEL , node, rqstp->rq_maxpages, rqstp->rq_pages); -return ret == pages; +return ret == rqstp->rq_maxpages; }/*
@@ -658,11 +660,12 @@ svc_init_buffer(struct svc_rqst *rqstp, unsigned int size, int node)static void svc_release_buffer (struct svc_rqst *rqstp) { -unsigned int i; +unsigned long i; -for (i =0 ; i <ARRAY_SIZE (rqstp->rq_pages); i++) +for (i =0 ; i < rqstp->rq_maxpages; i++)if (rqstp->rq_pages[i])put_page (rqstp->rq_pages[i]); +kfree (rqstp->rq_pages); } static void
@@ -704,7 +707,7 @@ svc_prepare_thread(struct svc_serv *serv, struct svc_pool *pool, int node)if (!rqstp->rq_resp) goto out_enomem; -if (!svc_init_buffer (rqstp, serv->sv_max_mesg, node)) +if (!svc_init_buffer (rqstp, serv, node)) goto out_enomem; rqstp->rq_err = -EAGAIN ;/* No error yet */
@@ -896,7 +899,7 @@ EXPORT_SYMBOL_GPL(svc_set_num_threads);bool svc_rqst_replace_page (struct svc_rqst *rqstp,struct page *page) {struct page **begin = rqstp->rq_pages; -struct page **end = &rqstp->rq_pages[RPCSVC_MAXPAGES ]; +struct page **end = &rqstp->rq_pages[rqstp->rq_maxpages];if (unlikely (rqstp->rq_next_page < begin || rqstp->rq_next_page > end)) {trace_svc_replace_page_err (rqstp);
net/sunrpc/svc_xprt.c +1 -9
@@ -652,18 +652,10 @@ static void svc_check_conn_limits(struct svc_serv *serv)static bool svc_alloc_arg (struct svc_rqst *rqstp) { -struct svc_serv *serv = rqstp->rq_server;struct xdr_buf *arg = &rqstp->rq_arg;unsigned long pages, filled, ret; - pages = (serv->sv_max_mesg +2 *PAGE_SIZE ) >>PAGE_SHIFT ; -if (pages >RPCSVC_MAXPAGES ) { -pr_warn_once ("svc: warning: pages=%lu > RPCSVC_MAXPAGES=%lu\n" , - pages,RPCSVC_MAXPAGES ); -/* use as many pages as possible */ - pages =RPCSVC_MAXPAGES ; - } - + pages = rqstp->rq_maxpages;for (filled =0 ; filled < pages; filled = ret) { ret =alloc_pages_bulk (GFP_KERNEL , pages, rqstp->rq_pages);if (ret > filled)
net/sunrpc/xprtrdma/svc_rdma_rw.c +1 -1
@@ -765,7 +765,7 @@ static int svc_rdma_build_read_segment(struct svc_rqst *rqstp, } len -= seg_len; -if (len && ((head->rc_curpage +1 ) >ARRAY_SIZE (rqstp->rq_pages))) +if (len && ((head->rc_curpage +1 ) > rqstp->rq_maxpages)) goto out_overrun; }
Signature · 1 line
2.49.0
[email protected]
maintainerPATCH v5 5/19 sunrpc: Replace the rq_bvec array with dynamically-allocated memory
In reply to [email protected]From: Chuck Lever <[email protected]>
As a step towards making NFSD's maximum rsize and wsize variable at run-time, replace the fixed-size rq_bvec[] array in struct svc_rqst with a chunk of dynamically-allocated memory.
The rq_bvec[] array contains enough bio_vecs to handle each page in a maximum size RPC message.
On a system with 8-byte pointers and 4KB pages, pahole reports that the rq_bvec[] array is 4144 bytes. This patch replaces that array with a single 8-byte pointer field.
--- include/linux/sunrpc/svc.h | 2 +- net/sunrpc/svc.c | 7 +++++++ net/sunrpc/svcsock.c | 7 +++---- 3 files changed, 11 insertions(+), 5 deletions(-)
include/linux/sunrpc/svc.h +1 -1
@@ -213,7 +213,7 @@ struct svc_rqst {struct folio_batch rq_fbatch;struct kvec rq_vec[RPCSVC_MAXPAGES ];/* generally useful.. */ -struct bio_vec rq_bvec[RPCSVC_MAXPAGES ]; +struct bio_vec *rq_bvec;__be32 rq_xid;/* transmission id */ u32 rq_prog;/* program number */
net/sunrpc/svc.c +7 -0
@@ -672,6 +672,7 @@ static void svc_rqst_free(struct svc_rqst *rqstp) {folio_batch_release (&rqstp->rq_fbatch); +kfree (rqstp->rq_bvec);svc_release_buffer (rqstp);if (rqstp->rq_scratch_page)put_page (rqstp->rq_scratch_page);
@@ -710,6 +711,12 @@ svc_prepare_thread(struct svc_serv *serv, struct svc_pool *pool, int node)if (!svc_init_buffer (rqstp, serv, node)) goto out_enomem; + rqstp->rq_bvec =kcalloc_node (rqstp->rq_maxpages, +sizeof (struct bio_vec ), +GFP_KERNEL , node); +if (!rqstp->rq_bvec) + goto out_enomem; + rqstp->rq_err = -EAGAIN ;/* No error yet */ serv->sv_nrthreads +=1 ;
net/sunrpc/svcsock.c +3 -4
@@ -713,8 +713,7 @@ static int svc_udp_sendto(struct svc_rqst *rqstp)if (svc_xprt_is_dead (xprt)) goto out_notconn; - count =xdr_buf_to_bvec (rqstp->rq_bvec, -ARRAY_SIZE (rqstp->rq_bvec), xdr); + count =xdr_buf_to_bvec (rqstp->rq_bvec, rqstp->rq_maxpages, xdr);iov_iter_bvec (&msg.msg_iter,ITER_SOURCE , rqstp->rq_bvec, count, rqstp->rq_res.len);
@@ -1219,8 +1218,8 @@ static int svc_tcp_sendmsg(struct svc_sock *svsk, struct svc_rqst *rqstp,memcpy (buf, &marker,sizeof (marker));bvec_set_virt (rqstp->rq_bvec, buf,sizeof (marker)); - count =xdr_buf_to_bvec (rqstp->rq_bvec +1 , -ARRAY_SIZE (rqstp->rq_bvec) -1 , &rqstp->rq_res); + count =xdr_buf_to_bvec (rqstp->rq_bvec +1 , rqstp->rq_maxpages, + &rqstp->rq_res);iov_iter_bvec (&msg.msg_iter,ITER_SOURCE , rqstp->rq_bvec,1 + count,sizeof (marker) + rqstp->rq_res.len);
Signature · 1 line
2.49.0
[email protected]
maintainerPATCH v5 6/19 NFSD: Use rqstp->rq_bvec in nfsd_iter_read()
In reply to [email protected]From: Chuck Lever <[email protected]>
If we can get rid of all uses of rq_vec, then it can be removed. Replace one use of rqstp::rq_vec with rqstp::rq_bvec.
--- fs/nfsd/vfs.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
fs/nfsd/vfs.c +7 -7
@@ -1085,23 +1085,23 @@ __be32 nfsd_iter_read(struct svc_rqst *rqstp, struct svc_fh *fhp,unsigned long v, total;struct iov_iter iter;loff_t ppos = offset; -struct page *page;ssize_t host_err; +size_t len; v =0 ; total = *count;while (total) { - page = *(rqstp->rq_next_page++); - rqstp->rq_vec[v].iov_base =page_address (page) + base; - rqstp->rq_vec[v].iov_len =min_t (size_t, total,PAGE_SIZE - base); - total -= rqstp->rq_vec[v].iov_len; + len =min_t (size_t, total,PAGE_SIZE - base); +bvec_set_page (&rqstp->rq_bvec[v], *(rqstp->rq_next_page++), + len, base); + total -= len; ++v; base =0 ; } -WARN_ON_ONCE (v >ARRAY_SIZE (rqstp->rq_vec)); +WARN_ON_ONCE (v > rqstp->rq_maxpages);trace_nfsd_read_vector (rqstp, fhp, offset, *count); -iov_iter_kvec (&iter,ITER_DEST , rqstp->rq_vec, v, *count); +iov_iter_bvec (&iter,ITER_DEST , rqstp->rq_bvec, v, *count); host_err =vfs_iter_read (file, &iter, &ppos,0 );return nfsd_finish_read (rqstp, fhp, file, offset, count, eof, host_err); }
Signature · 1 line
2.49.0
[email protected]
maintainerPATCH v5 7/19 NFSD: De-duplicate the svc_fill_write_vector() call sites
In reply to [email protected]From: Chuck Lever <[email protected]>
All three call sites do the same thing.
I'm struggling with this a bit, however. struct xdr_buf is an XDR layer object and unmarshaling a WRITE payload is clearly a task intended to be done by the proc and xdr functions, not by VFS. This feels vaguely like a layering violation.
--- fs/nfsd/nfs3proc.c | 5 +--- fs/nfsd/nfs4proc.c | 8 ++---- fs/nfsd/nfsproc.c | 9 +++---- fs/nfsd/vfs.c | 52 +++++++++++++++++++++++++++++--------- fs/nfsd/vfs.h | 10 ++++---- include/linux/sunrpc/svc.h | 2 +- net/sunrpc/svc.c | 4 +-- 7 files changed, 54 insertions(+), 36 deletions(-)
fs/nfsd/nfs3proc.c +1 -4
@@ -220,7 +220,6 @@ nfsd3_proc_write(struct svc_rqst *rqstp)struct nfsd3_writeargs *argp = rqstp->rq_argp;struct nfsd3_writeres *resp = rqstp->rq_resp;unsigned long cnt = argp->len; -unsigned int nvecs; dprintk("nfsd: WRITE(3) %s %d bytes at %Lu%s\n", SVCFH_fmt(&argp->fh),
@@ -235,10 +234,8 @@ nfsd3_proc_write(struct svc_rqst *rqstp)fh_copy (&resp->fh, &argp->fh); resp->committed = argp->stable; - nvecs =svc_fill_write_vector (rqstp, &argp->payload); - resp->status =nfsd_write (rqstp, &resp->fh, argp->offset, - rqstp->rq_vec, nvecs, &cnt, + &argp->payload, &cnt, resp->committed, resp->verf); resp->count = cnt; resp->status =nfsd3_map_status (resp->status);
fs/nfsd/nfs4proc.c +2 -6
@@ -1216,7 +1216,6 @@ nfsd4_write(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,struct nfsd_file *nf =NULL ;__be32 status = nfs_ok;unsigned long cnt; -int nvecs;if (write->wr_offset > (u64 )OFFSET_MAX || write->wr_offset + write->wr_buflen > (u64 )OFFSET_MAX )
@@ -1231,12 +1230,9 @@ nfsd4_write(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,return status; write->wr_how_written = write->wr_stable_how; - - nvecs =svc_fill_write_vector (rqstp, &write->wr_payload); - status =nfsd_vfs_write (rqstp, &cstate->current_fh, nf, - write->wr_offset, rqstp->rq_vec, nvecs, &cnt, - write->wr_how_written, + write->wr_offset, &write->wr_payload, + &cnt, write->wr_how_written, (__be32 *)write->wr_verifier.data);nfsd_file_put (nf);
fs/nfsd/nfsproc.c +3 -6
@@ -251,17 +251,14 @@ nfsd_proc_write(struct svc_rqst *rqstp)struct nfsd_writeargs *argp = rqstp->rq_argp;struct nfsd_attrstat *resp = rqstp->rq_resp;unsigned long cnt = argp->len; -unsigned int nvecs;dprintk ("nfsd: WRITE %s %u bytes at %d\n" ,SVCFH_fmt (&argp->fh), argp->len, argp->offset); - nvecs =svc_fill_write_vector (rqstp, &argp->payload); - - resp->status =nfsd_write (rqstp,fh_copy (&resp->fh, &argp->fh), - argp->offset, rqstp->rq_vec, nvecs, - &cnt,NFS_DATA_SYNC ,NULL ); +fh_copy (&resp->fh, &argp->fh); + resp->status =nfsd_write (rqstp, &resp->fh, argp->offset, + &argp->payload, &cnt,NFS_DATA_SYNC ,NULL );if (resp->status == nfs_ok) resp->status =fh_getattr (&resp->fh, &resp->stat);else if (resp->status == nfserr_jukebox)
fs/nfsd/vfs.c +40 -12
86 lines not on this page · raw message
fs/nfsd/vfs.h +5 -5
@@ -128,13 +128,13 @@ bool nfsd_read_splice_ok(struct svc_rqst *rqstp);__be32 nfsd_read (struct svc_rqst *rqstp,struct svc_fh *fhp,loff_t offset,unsigned long *count,u32 *eof); -__be32 nfsd_write (struct svc_rqst *,struct svc_fh *,loff_t , -struct kvec *,int ,unsigned long *, -int stable,__be32 *verf); +__be32 nfsd_write (struct svc_rqst *rqstp,struct svc_fh *fhp, +loff_t offset,const struct xdr_buf *payload, +unsigned long *cnt,int stable,__be32 *verf);__be32 nfsd_vfs_write (struct svc_rqst *rqstp,struct svc_fh *fhp,struct nfsd_file *nf,loff_t offset, -struct kvec *vec,int vlen,unsigned long *cnt, -int stable,__be32 *verf); +const struct xdr_buf *payload, +unsigned long *cnt,int stable,__be32 *verf);__be32 nfsd_readlink (struct svc_rqst *,struct svc_fh *,char *,int *); __be32 nfsd_symlink(struct svc_rqst *, struct svc_fh *,
include/linux/sunrpc/svc.h +1 -1
@@ -471,7 +471,7 @@ int svc_encode_result_payload(struct svc_rqst *rqstp,unsigned int offset, unsigned int length);unsigned int svc_fill_write_vector (struct svc_rqst *rqstp, -struct xdr_buf *payload); +const struct xdr_buf *payload);char *svc_fill_symlink_pathname (struct svc_rqst *rqstp,struct kvec *first,void *p,size_t total);
net/sunrpc/svc.c +2 -2
@@ -1727,10 +1727,10 @@ EXPORT_SYMBOL_GPL(svc_encode_result_payload);* Fills in rqstp::rq_vec, and returns the number of elements. */ unsigned int svc_fill_write_vector (struct svc_rqst *rqstp, -struct xdr_buf *payload) +const struct xdr_buf *payload) { +const struct kvec *first = payload->head;struct page **pages = payload->pages; -struct kvec *first = payload->head;struct kvec *vec = rqstp->rq_vec;size_t total = payload->len;unsigned int i;
Signature · 1 line
2.49.0
[email protected]
maintainerPATCH v5 8/19 SUNRPC: Export xdr_buf_to_bvec()
In reply to [email protected]From: Chuck Lever <[email protected]>
Prepare xdr_buf_to_bvec() to be invoked from upper layer protocol code.
--- net/sunrpc/xdr.c | 1 + 1 file changed, 1 insertion(+)
net/sunrpc/xdr.c +1 -0
@@ -213,6 +213,7 @@ unsigned int xdr_buf_to_bvec(struct bio_vec *bvec, unsigned int bvec_size,pr_warn_once ("%s: bio_vec array overflow\n" , __func__);return count -1 ; } +EXPORT_SYMBOL_GPL (xdr_buf_to_bvec);/** * xdr_inline_pages - Prepare receive buffer for a large reply
Signature · 1 line
2.49.0
[email protected]
maintainerPATCH v5 9/19 NFSD: Use rqstp->rq_bvec in nfsd_iter_write()
In reply to [email protected]From: Chuck Lever <[email protected]>
If we can get rid of all uses of rq_vec, then it can be removed. Replace one use of rqstp::rq_vec with rqstp::rq_bvec.
The feeling of layering violation grows stronger now that <linux/sunrpc/xdr.h> is included in fs/nfsd/vfs.c.
--- fs/nfsd/vfs.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
fs/nfsd/vfs.c +3 -2
@@ -31,6 +31,7 @@#include <linux/exportfs.h> #include <linux/writeback.h> #include <linux/security.h> +#include <linux/sunrpc/xdr.h> #include "xdr3.h"
@@ -1206,8 +1207,8 @@ nfsd_vfs_write(struct svc_rqst *rqstp, struct svc_fh *fhp,if (stable && !fhp->fh_use_wgather) flags |=RWF_SYNC ; - nvecs =svc_fill_write_vector (rqstp, payload); -iov_iter_kvec (&iter,ITER_SOURCE , rqstp->rq_vec, nvecs, *cnt); + nvecs =xdr_buf_to_bvec (rqstp->rq_bvec, rqstp->rq_maxpages, payload); +iov_iter_bvec (&iter,ITER_SOURCE , rqstp->rq_bvec, nvecs, *cnt); since =READ_ONCE (file->f_wb_err);if (verf)nfsd_copy_write_verifier (verf, nn);
Signature · 1 line
2.49.0
[email protected]
maintainerPATCH v5 10/19 SUNRPC: Remove svc_fill_write_vector()
In reply to [email protected]From: Chuck Lever <[email protected]>
Clean up: This API is no longer used.
--- include/linux/sunrpc/svc.h | 2 -- net/sunrpc/svc.c | 40 -------------------------------------- 2 files changed, 42 deletions(-)
include/linux/sunrpc/svc.h +0 -2
@@ -470,8 +470,6 @@ const char * svc_proc_name(const struct svc_rqst *rqstp);int svc_encode_result_payload (struct svc_rqst *rqstp,unsigned int offset,unsigned int length); -unsigned int svc_fill_write_vector (struct svc_rqst *rqstp, -const struct xdr_buf *payload);char *svc_fill_symlink_pathname (struct svc_rqst *rqstp,struct kvec *first,void *p,size_t total);
net/sunrpc/svc.c +0 -40
@@ -1719,46 +1719,6 @@ int svc_encode_result_payload(struct svc_rqst *rqstp, unsigned int offset, }EXPORT_SYMBOL_GPL (svc_encode_result_payload); -/** -* svc_fill_write_vector - Construct data argument for VFS write call -* @rqstp: svc_rqst to operate on -* @payload: xdr_buf containing only the write data payload -* -* Fills in rqstp::rq_vec, and returns the number of elements. -*/ -unsigned int svc_fill_write_vector (struct svc_rqst *rqstp, -const struct xdr_buf *payload) -{ -const struct kvec *first = payload->head; -struct page **pages = payload->pages; -struct kvec *vec = rqstp->rq_vec; -size_t total = payload->len; -unsigned int i; - -/* Some types of transport can present the write payload -* entirely in rq_arg.pages. In this case, @first is empty. -*/ - i =0 ; -if (first->iov_len) { - vec[i].iov_base = first->iov_base; - vec[i].iov_len =min_t (size_t, total, first->iov_len); - total -= vec[i].iov_len; - ++i; - } - -while (total) { - vec[i].iov_base =page_address (*pages); - vec[i].iov_len =min_t (size_t, total,PAGE_SIZE ); - total -= vec[i].iov_len; - ++i; - ++pages; - } - -WARN_ON_ONCE (i >ARRAY_SIZE (rqstp->rq_vec)); -return i; -} -EXPORT_SYMBOL_GPL (svc_fill_write_vector); -/** * svc_fill_symlink_pathname - Construct pathname argument for VFS symlink call * @rqstp: svc_rqst to operate on
Signature · 1 line
2.49.0
[email protected]
maintainerPATCH v5 11/19 SUNRPC: Remove svc_rqst :: rq_vec
In reply to [email protected]From: Chuck Lever <[email protected]>
Clean up: This array is no longer used.
On a system with 8-byte pointers and 4KB pages, pahole reports that the rq_vec[] array accounts for 4144 bytes.
--- include/linux/sunrpc/svc.h | 1 - 1 file changed, 1 deletion(-)
include/linux/sunrpc/svc.h +0 -1
@@ -212,7 +212,6 @@ struct svc_rqst {struct page * *rq_page_end;/* one past the last page */ struct folio_batch rq_fbatch; -struct kvec rq_vec[RPCSVC_MAXPAGES ];/* generally useful.. */ struct bio_vec *rq_bvec;__be32 rq_xid;/* transmission id */
Signature · 1 line
2.49.0
[email protected]
maintainerPATCH v5 12/19 sunrpc: Adjust size of socket's receive page array dynamically
In reply to [email protected]From: Chuck Lever <[email protected]>
As a step towards making NFSD's maximum rsize and wsize variable at run-time, make sk_pages a flexible array.
--- include/linux/sunrpc/svcsock.h | 4 +++- net/sunrpc/svcsock.c | 8 ++++++-- 2 files changed, 9 insertions(+), 3 deletions(-)
include/linux/sunrpc/svcsock.h +3 -1
@@ -40,7 +40,9 @@ struct svc_sock {struct completion sk_handshake_done; -struct page * sk_pages[RPCSVC_MAXPAGES ];/* received data */ +/* received data */ +unsigned long sk_maxpages; + struct page * sk_pages[] __counted_by(sk_maxpages); };static inline u32 svc_sock_reclen (struct svc_sock *svsk)
net/sunrpc/svcsock.c +6 -2
@@ -1339,7 +1339,8 @@ static void svc_tcp_init(struct svc_sock *svsk, struct svc_serv *serv) svsk->sk_marker = xdr_zero; svsk->sk_tcplen =0 ; svsk->sk_datalen =0 ; -memset (&svsk->sk_pages[0 ],0 ,sizeof (svsk->sk_pages)); +memset (&svsk->sk_pages[0 ],0 , + svsk->sk_maxpages *sizeof (struct page *));tcp_sock_set_nodelay (sk);
@@ -1378,10 +1379,13 @@ static struct svc_sock *svc_setup_socket(struct svc_serv *serv,struct svc_sock *svsk;struct sock *inet;int pmap_register = !(flags &SVC_SOCK_ANONYMOUS ); +unsigned long pages; - svsk =kzalloc (sizeof (*svsk),GFP_KERNEL ); + pages =svc_serv_maxpages (serv); + svsk =kzalloc (struct_size (svsk, sk_pages, pages),GFP_KERNEL );if (!svsk)return ERR_PTR (-ENOMEM ); + svsk->sk_maxpages = pages; inet = sock->sk;
Signature · 1 line
2.49.0
[email protected]
maintainerPATCH v5 13/19 svcrdma: Adjust the number of entries in svc_rdma_recv_ctxt::rc_pages
In reply to [email protected]From: Chuck Lever <[email protected]>
Allow allocation of more entries in the rc_pages[] array when the maximum size of an RPC message is increased.
--- include/linux/sunrpc/svc_rdma.h | 3 ++- net/sunrpc/xprtrdma/svc_rdma_recvfrom.c | 8 ++++++-- 2 files changed, 8 insertions(+), 3 deletions(-)
include/linux/sunrpc/svc_rdma.h +2 -1
@@ -202,7 +202,8 @@ struct svc_rdma_recv_ctxt {struct svc_rdma_pcl rc_reply_pcl;unsigned int rc_page_count; -struct page *rc_pages[RPCSVC_MAXPAGES ]; +unsigned long rc_maxpages; + struct page *rc_pages[] __counted_by(rc_maxpages); };/*
net/sunrpc/xprtrdma/svc_rdma_recvfrom.c +6 -2
@@ -120,12 +120,16 @@ svc_rdma_recv_ctxt_alloc(struct svcxprt_rdma *rdma) {int node =ibdev_to_node (rdma->sc_cm_id->device);struct svc_rdma_recv_ctxt *ctxt; +unsigned long pages;dma_addr_t addr;void *buffer; - ctxt =kzalloc_node (sizeof (*ctxt),GFP_KERNEL , node); + pages =svc_serv_maxpages (rdma->sc_xprt.xpt_server); + ctxt =kzalloc_node (struct_size (ctxt, rc_pages, pages), +GFP_KERNEL , node);if (!ctxt) goto fail0; + ctxt->rc_maxpages = pages; buffer =kmalloc_node (rdma->sc_max_req_size,GFP_KERNEL , node);if (!buffer) goto fail1;
@@ -497,7 +501,7 @@ static bool xdr_check_write_chunk(struct svc_rdma_recv_ctxt *rctxt)* a computation, perform a simple range check. This is an * arbitrary but sensible limit (ie, not architectural). */ -if (unlikely (segcount >RPCSVC_MAXPAGES )) +if (unlikely (segcount > rctxt->rc_maxpages))return false; p = xdr_inline_decode(&rctxt->rc_stream,
Signature · 1 line
2.49.0
[email protected]
maintainerPATCH v5 14/19 svcrdma: Adjust the number of entries in svc_rdma_send_ctxt::sc_pages
In reply to [email protected]From: Chuck Lever <[email protected]>
Allow allocation of more entries in the sc_pages[] array when the maximum size of an RPC message is increased.
--- include/linux/sunrpc/svc_rdma.h | 3 ++- net/sunrpc/xprtrdma/svc_rdma_sendto.c | 16 +++++++++++++--- 2 files changed, 15 insertions(+), 4 deletions(-)
include/linux/sunrpc/svc_rdma.h +2 -1
@@ -245,7 +245,8 @@ struct svc_rdma_send_ctxt {void *sc_xprt_buf;int sc_page_count;int sc_cur_sge_no; -struct page *sc_pages[RPCSVC_MAXPAGES ]; +unsigned long sc_maxpages; +struct page **sc_pages;struct ib_sge sc_sges[]; };
net/sunrpc/xprtrdma/svc_rdma_sendto.c +13 -3
@@ -118,6 +118,7 @@ svc_rdma_send_ctxt_alloc(struct svcxprt_rdma *rdma) {int node =ibdev_to_node (rdma->sc_cm_id->device);struct svc_rdma_send_ctxt *ctxt; +unsigned long pages;dma_addr_t addr;void *buffer;int i;
@@ -126,13 +127,19 @@ svc_rdma_send_ctxt_alloc(struct svcxprt_rdma *rdma) GFP_KERNEL, node);if (!ctxt) goto fail0; + pages =svc_serv_maxpages (rdma->sc_xprt.xpt_server); + ctxt->sc_pages =kcalloc_node (pages,sizeof (struct page *), +GFP_KERNEL , node); +if (!ctxt->sc_pages) + goto fail1; + ctxt->sc_maxpages = pages; buffer =kmalloc_node (rdma->sc_max_req_size,GFP_KERNEL , node);if (!buffer) - goto fail1; + goto fail2; addr =ib_dma_map_single (rdma->sc_pd->device, buffer, rdma->sc_max_req_size,DMA_TO_DEVICE );if (ib_dma_mapping_error (rdma->sc_pd->device, addr)) - goto fail2; + goto fail3;svc_rdma_send_cid_init (rdma, &ctxt->sc_cid);
@@ -151,8 +158,10 @@ svc_rdma_send_ctxt_alloc(struct svcxprt_rdma *rdma) ctxt->sc_sges[i].lkey = rdma->sc_pd->local_dma_lkey;return ctxt; -fail2: +fail3:kfree (buffer); +fail2: +kfree (ctxt->sc_pages); fail1:kfree (ctxt); fail0:
@@ -176,6 +185,7 @@ void svc_rdma_send_ctxts_destroy(struct svcxprt_rdma *rdma) rdma->sc_max_req_size, DMA_TO_DEVICE);kfree (ctxt->sc_xprt_buf); +kfree (ctxt->sc_pages);kfree (ctxt); } }
Signature · 1 line
2.49.0
[email protected]
maintainerPATCH v5 15/19 sunrpc: Remove the RPCSVC_MAXPAGES macro
In reply to [email protected]From: Chuck Lever <[email protected]>
It is no longer used.
--- include/linux/sunrpc/svc.h | 7 ------- 1 file changed, 7 deletions(-)
include/linux/sunrpc/svc.h +0 -7
@@ -150,14 +150,7 @@ extern u32 svc_max_payload(const struct svc_rqst *rqstp);* list. xdr_buf.tail points to the end of the first page. * This assumes that the non-page part of an rpc reply will fit * in a page - NFSd ensures this. lockd also has no trouble. -* -* Each request/reply pair can have at most one "payload", plus two pages, -* one for the request, and one for the reply. -* We using ->sendfile to return read data, we might need one extra page -* if the request is not page-aligned. So add another '1'. */ -#define RPCSVC_MAXPAGES ((RPCSVC_MAXPAYLOAD+PAGE_SIZE-1)/PAGE_SIZE \ - + 2 + 1)/** * svc_serv_maxpages - maximum count of pages needed for one RPC message
Signature · 1 line
2.49.0
[email protected]
maintainerPATCH v5 16/19 NFSD: Remove NFSD_BUFSIZE
In reply to [email protected]From: Chuck Lever <[email protected]>
Clean up: The documenting comment for NFSD_BUFSIZE is quite stale. NFSD_BUFSIZE is used only for NFSv4 Reply these days; never for NFSv2 or v3, and never for RPC Calls. Even so, the byte count estimate does not include the size of the NFSv4 COMPOUND Reply HEADER or the RPC auth flavor.
--- fs/nfsd/nfs4proc.c | 2 +- fs/nfsd/nfs4state.c | 2 +- fs/nfsd/nfs4xdr.c | 2 +- fs/nfsd/nfsd.h | 13 ------------- 4 files changed, 3 insertions(+), 16 deletions(-)
fs/nfsd/nfs4proc.c +1 -1
@@ -3845,7 +3845,7 @@ static const struct svc_procedure nfsd_procedures4[2] = { .pc_ressize = sizeof(struct nfsd4_compoundres), .pc_release = nfsd4_release_compoundargs, .pc_cachetype = RC_NOCACHE, - .pc_xdrressize = NFSD_BUFSIZE/4, + .pc_xdrressize = 3+NFSSVC_MAXBLKSIZE/4, .pc_name = "COMPOUND", }, };
fs/nfsd/nfs4state.c +1 -1
@@ -4394,7 +4394,7 @@ nfsd4_sequence(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate, nfserr_rep_too_big;if (xdr_restrict_buflen (xdr, buflen - rqstp->rq_auth_slack)) goto out_put_session; -svc_reserve (rqstp, buflen); +svc_reserve_auth (rqstp, buflen); status = nfs_ok;/* Success! accept new slot seqid */
fs/nfsd/nfs4xdr.c +1 -1
@@ -2564,7 +2564,7 @@ nfsd4_decode_compound(struct nfsd4_compoundargs *argp)/* Sessions make the DRC unnecessary: */ if (argp->minorversion) cachethis = false; -svc_reserve (argp->rqstp, max_reply + readbytes); +svc_reserve_auth (argp->rqstp, max_reply + readbytes); argp->rqstp->rq_cachetype = cachethis ?RC_REPLBUFF :RC_NOCACHE ; argp->splice_ok =nfsd_read_splice_ok (argp->rqstp);
fs/nfsd/nfsd.h +0 -13
@@ -50,19 +50,6 @@ bool nfsd_support_version(int vers);/* NFSv2 is limited by the protocol specification, see RFC 1094 */ #define NFSSVC_MAXBLKSIZE_V2 (8*1024) - -/* -* Largest number of bytes we need to allocate for an NFS -* call or reply. Used to control buffer sizes. We use -* the length of v3 WRITE, READDIR and READDIR replies -* which are an RPC header, up to 26 XDR units of reply -* data, and some page data. -* -* Note that accuracy here doesn't matter too much as the -* size is rounded up to a page size when allocating space. -*/ -#define NFSD_BUFSIZE ((RPC_MAX_HEADER_WITH_AUTH+26)*XDR_UNIT + NFSSVC_MAXBLKSIZE) -struct readdir_cd {__be32 err;/* 0, nfserr, or nfserr_eof */ };
Signature · 1 line
2.49.0
[email protected]
maintainerPATCH v5 17/19 NFSD: Remove NFSSVC_MAXBLKSIZE_V2 macro
In reply to [email protected]From: Chuck Lever <[email protected]>
The 8192-byte maximum is a protocol-defined limit, and we already have a symbolic constant defined whose name matches the name of the limit defined in the protocol. Replace the duplicate.
No change in behavior is expected.
--- fs/nfsd/nfsd.h | 2 -- fs/nfsd/nfsproc.c | 4 ++-- fs/nfsd/nfsxdr.c | 4 ++-- 3 files changed, 4 insertions(+), 6 deletions(-)
fs/nfsd/nfsd.h +0 -2
@@ -47,8 +47,6 @@ bool nfsd_support_version(int vers);* Maximum blocksizes supported by daemon under various circumstances. */ #define NFSSVC_MAXBLKSIZE RPCSVC_MAXPAYLOAD -/* NFSv2 is limited by the protocol specification, see RFC 1094 */ -#define NFSSVC_MAXBLKSIZE_V2 (8*1024)struct readdir_cd {__be32 err;/* 0, nfserr, or nfserr_eof */
fs/nfsd/nfsproc.c +2 -2
@@ -212,7 +212,7 @@ nfsd_proc_read(struct svc_rqst *rqstp)SVCFH_fmt (&argp->fh), argp->count, argp->offset); - argp->count =min_t (u32, argp->count,NFSSVC_MAXBLKSIZE_V2 ); + argp->count =min_t (u32, argp->count,NFS_MAXDATA ); argp->count =min_t (u32, argp->count, rqstp->rq_res.buflen); resp->pages = rqstp->rq_next_page;
@@ -707,7 +707,7 @@ static const struct svc_procedure nfsd_procedures2[18] = { .pc_argzero = sizeof(struct nfsd_readargs), .pc_ressize = sizeof(struct nfsd_readres), .pc_cachetype = RC_NOCACHE, - .pc_xdrressize = ST+AT+1+NFSSVC_MAXBLKSIZE_V2/4, + .pc_xdrressize = ST+AT+1+NFS_MAXDATA/4, .pc_name = "READ", }, [NFSPROC_WRITECACHE] = {
fs/nfsd/nfsxdr.c +2 -2
@@ -336,7 +336,7 @@ nfssvc_decode_writeargs(struct svc_rqst *rqstp, struct xdr_stream *xdr)/* opaque data */ if (xdr_stream_decode_u32 (xdr, &args->len) <0 )return false; -if (args->len >NFSSVC_MAXBLKSIZE_V2 ) +if (args->len >NFS_MAXDATA )return false;return xdr_stream_subsegment (xdr, &args->payload, args->len);
@@ -540,7 +540,7 @@ nfssvc_encode_statfsres(struct svc_rqst *rqstp, struct xdr_stream *xdr) p =xdr_reserve_space (xdr,XDR_UNIT *5 );if (!p)return false; - *p++ =cpu_to_be32 (NFSSVC_MAXBLKSIZE_V2 ); + *p++ =cpu_to_be32 (NFS_MAXDATA ); *p++ =cpu_to_be32 (stat->f_bsize); *p++ =cpu_to_be32 (stat->f_blocks); *p++ =cpu_to_be32 (stat->f_bfree);
Signature · 1 line
2.49.0
[email protected]
maintainerPATCH v5 18/19 NFSD: Add a "default" block size
In reply to [email protected]From: Chuck Lever <[email protected]>
We'd like to increase the maximum r/wsize that NFSD can support, but without introducing possible regressions. So let's add a default setting of 1MB. A subsequent patch will raise the maximum value but leave the default alone.
No behavior change is expected.
--- fs/nfsd/nfsd.h | 9 +++++++-- fs/nfsd/nfssvc.c | 2 +- 2 files changed, 8 insertions(+), 3 deletions(-)
fs/nfsd/nfsd.h +7 -2
@@ -44,9 +44,14 @@ bool nfsd_support_version(int vers);#include "stats.h" /* -* Maximum blocksizes supported by daemon under various circumstances. +* Default and maximum payload size (NFS READ or WRITE), in bytes. +* The default is historical, and the maximum is an implementation +* limit. */ -#define NFSSVC_MAXBLKSIZE RPCSVC_MAXPAYLOAD +enum { +NFSSVC_DEFBLKSIZE =1 *1024 *1024 , +NFSSVC_MAXBLKSIZE =RPCSVC_MAXPAYLOAD , +};struct readdir_cd {__be32 err;/* 0, nfserr, or nfserr_eof */
fs/nfsd/nfssvc.c +1 -1
@@ -582,7 +582,7 @@ static int nfsd_get_default_max_blksize(void)*/ target >>=12 ; - ret =NFSSVC_MAXBLKSIZE ; + ret =NFSSVC_DEFBLKSIZE ;while (ret > target && ret >=8 *1024 *2 ) ret /=2 ;return ret;
Signature · 1 line
2.49.0
[email protected]
maintainerPATCH v5 19/19 SUNRPC: Bump the maximum payload size for the server
In reply to [email protected]From: Chuck Lever <[email protected]>
Increase the maximum server-side RPC payload to 4MB. The default remains at 1MB.
An API to adjust the operational maximum was added in 2006 by commit 596bbe53eb3a ("[PATCH] knfsd: Allow max size of NFSd payload to be configured"). To adjust the operational maximum using this API, shut down the NFS server. Then echo a new value into:
/proc/fs/nfsd/max_block_size
And restart the NFS server.
--- include/linux/sunrpc/svc.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
include/linux/sunrpc/svc.h +7 -7
@@ -119,14 +119,14 @@ void svc_destroy(struct svc_serv **svcp);* Linux limit; someone who cares more about NFS/UDP performance * can test a larger number. * -* For TCP transports we have more freedom. A size of 1MB is -* chosen to match the client limit. Other OSes are known to -* have larger limits, but those numbers are probably beyond -* the point of diminishing returns. +* For non-UDP transports we have more freedom. A size of 4MB is +* chosen to accommodate clients that support larger I/O sizes. */ -#define RPCSVC_MAXPAYLOAD (1*1024*1024u) -#define RPCSVC_MAXPAYLOAD_TCP RPCSVC_MAXPAYLOAD -#define RPCSVC_MAXPAYLOAD_UDP (32*1024u) +enum { +RPCSVC_MAXPAYLOAD =4 *1024 *1024 , +RPCSVC_MAXPAYLOAD_TCP =RPCSVC_MAXPAYLOAD , +RPCSVC_MAXPAYLOAD_UDP =32 *1024 , +};extern u32 svc_max_payload (const struct svc_rqst *rqstp);
Signature · 1 line
2.49.0
Re: [PATCH v5 19/19] SUNRPC: Bump the maximum payload size for the server
Could this patch series - minus the change to the default of 1MB - be promoted to Linux 6.6 LongTermSupport, please?
Aurélien
Quoted 52 lines · On Fri, May 9, 2025 at 9:06 PM <[email protected]> wrote:
From: Chuck Lever <[email protected]>
Increase the maximum server-side RPC payload to 4MB. The default remains at 1MB.
An API to adjust the operational maximum was added in 2006 by commit
596bbe53eb3a("[PATCH] knfsd: Allow max size of NFSd payload to be configured"). To adjust the operational maximum using this API, shut down the NFS server. Then echo a new value into:
/proc/fs/nfsd/max_block_sizeAnd restart the NFS server.
Reviewed-by Jeff Layton <[email protected]>Reviewed-by NeilBrown <[email protected]>Signed-off-by Chuck Lever <[email protected]>--- include/linux/sunrpc/svc.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)include/linux/sunrpc/svc.h +7
-8@@ -119,14 +119,14 @@ void svc_destroy(struct svc_serv **svcp);* Linux limit; someone who cares more about NFS/UDP performance * can test a larger number. * -* For TCP transports we have more freedom. A size of 1MB is -* chosen to match the client limit. Other OSes are known to -* have larger limits, but those numbers are probably beyond -* the point of diminishing returns. +* For non-UDP transports we have more freedom. A size of 4MB is +* chosen to accommodate clients that support larger I/O sizes. */ -#define RPCSVC_MAXPAYLOAD (1*1024*1024u) -#define RPCSVC_MAXPAYLOAD_TCP RPCSVC_MAXPAYLOAD -#define RPCSVC_MAXPAYLOAD_UDP (32*1024u) +enum { +RPCSVC_MAXPAYLOAD =4 *1024 *1024 , +RPCSVC_MAXPAYLOAD_TCP =RPCSVC_MAXPAYLOAD , +RPCSVC_MAXPAYLOAD_UDP =32 *1024 , +};extern u32 svc_max_payload (const struct svc_rqst *rqstp); --2.49.0
Signature · 2 lines
Aurélien Couderc <[email protected]> Big Data/Data mining expert, chess enthusiast
Chuck Lever
maintainerRe: [PATCH v5 19/19] SUNRPC: Bump the maximum payload size for the server
Quoted 2 lines · Aurélien Couderc
Could this patch series - minus the change to the default of 1MB - be promoted to Linux 6.6 LongTermSupport, please?
It has to be merged upstream first.
But, new features are generally not backported to stable. At this time, this feature is intended only for future kernels.
Quoted 57 lines
Aurélien
Quoted 52 lines · On Fri, May 9, 2025 at 9:06 PM <[email protected]> wrote:
From: Chuck Lever <[email protected]>
Increase the maximum server-side RPC payload to 4MB. The default remains at 1MB.
An API to adjust the operational maximum was added in 2006 by commit
596bbe53eb3a("[PATCH] knfsd: Allow max size of NFSd payload to be configured"). To adjust the operational maximum using this API, shut down the NFS server. Then echo a new value into:
/proc/fs/nfsd/max_block_sizeAnd restart the NFS server.
Reviewed-by Jeff Layton <[email protected]>Reviewed-by NeilBrown <[email protected]>Signed-off-by Chuck Lever <[email protected]>--- include/linux/sunrpc/svc.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)include/linux/sunrpc/svc.h +7
-8@@ -119,14 +119,14 @@ void svc_destroy(struct svc_serv **svcp);* Linux limit; someone who cares more about NFS/UDP performance * can test a larger number. * -* For TCP transports we have more freedom. A size of 1MB is -* chosen to match the client limit. Other OSes are known to -* have larger limits, but those numbers are probably beyond -* the point of diminishing returns. +* For non-UDP transports we have more freedom. A size of 4MB is +* chosen to accommodate clients that support larger I/O sizes. */ -#define RPCSVC_MAXPAYLOAD (1*1024*1024u) -#define RPCSVC_MAXPAYLOAD_TCP RPCSVC_MAXPAYLOAD -#define RPCSVC_MAXPAYLOAD_UDP (32*1024u) +enum { +RPCSVC_MAXPAYLOAD =4 *1024 *1024 , +RPCSVC_MAXPAYLOAD_TCP =RPCSVC_MAXPAYLOAD , +RPCSVC_MAXPAYLOAD_UDP =32 *1024 , +};extern u32 svc_max_payload (const struct svc_rqst *rqstp); --2.49.0
Signature · 1 line
Chuck Lever
Re: [PATCH v5 19/19] SUNRPC: Bump the maximum payload size for the server
Quoted 9 lines · Chuck Lever
Quoted 2 lines · Aurélien Couderc
Could this patch series - minus the change to the default of 1MB - be promoted to Linux 6.6 LongTermSupport, please?
It has to be merged upstream first.
But, new features are generally not backported to stable. At this time, this feature is intended only for future kernels.
1. I could argue that this patch series - minus the change to the default of 1MB - is a "necessary cleanup", removing half broken buffer size limits
2. The patch series makes /proc/fs/nfsd/max_block_size usable
IMO this qualifies the patch series for stable@
Aurélien
Signature · 2 lines
Aurélien Couderc <[email protected]> Big Data/Data mining expert, chess enthusiast
Re: [PATCH v5 01/19] svcrdma: Reduce the number of rdma_rw contexts per-QP
In reply to [email protected]Quoted 74 lines · On Fri, 2025-05-09 at 15:03 -0400, [email protected] wrote:
From: Chuck Lever <[email protected]>
There is an upper bound on the number of
rdma_rwcontexts that can be created per QP.This invisible upper bound is because
rdma_create_qp()adds one or more additional SQEs for each ctxt that the ULP requests via qp_attr.cap.max_rdma_ctxs. The QP's actual Send Queue length is on the order of the sum of qp_attr.cap.max_send_wr and a factor times qp_attr.cap.max_rdma_ctxs. The factor can be up to three, depending on whether MR operations are required before RDMA Reads.This limit is not visible to RDMA consumers via
dev->attrs. When the limit is surpassed, QP creation fails with-ENOMEM. For example:svcrdma's estimate of the number of
rdma_rwcontexts it needs is three times the number of pages inRPCSVC_MAXPAGES. When MAXPAGES is about 260, the internally-computed SQ length should be:64 credits + 10 backlog + 3 * (3 * 260) = 2414
Which is well below the advertised
qp_max_wrof 32768.If
RPCSVC_MAXPAGESis increased to 4MB, that's 1040 pages:64 credits + 10 backlog + 3 * (3 * 1040) = 9434
However, QP creation fails. Dynamic printk for mlx5 shows:
calc_sq_size:618:(pid 1514): send queue size (9326 * 256 / 64 -> 65536) exceeds limits(32768)
Although 9326 is still far below
qp_max_wr, QP creation still fails.Because the total SQ length calculation is opaque to RDMA consumers, there doesn't seem to be much that can be done about this except for consumers to try to keep the requested
rdma_rwctxt count low.Fixes 2da0f610e733 ("svcrdma: Increase the per-transport rw_ctx count")Reviewed-by NeilBrown <[email protected]>Reviewed-by Christoph Hellwig <[email protected]>Signed-off-by Chuck Lever <[email protected]>--- net/sunrpc/xprtrdma/svc_rdma_transport.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)net/sunrpc/xprtrdma/svc_rdma_transport.c +2
-5@@ -406,12 +406,12 @@ static void svc_rdma_xprt_done(struct rpcrdma_notification *rn)*/ static struct svc_xprt *svc_rdma_accept (struct svc_xprt *xprt) { +unsigned int ctxts, rq_depth, maxpayload;struct svcxprt_rdma *listen_rdma;struct svcxprt_rdma *newxprt =NULL ;struct rdma_conn_param conn_param;struct rpcrdma_connect_private pmsg;struct ib_qp_init_attr qp_attr; -unsigned int ctxts, rq_depth;struct ib_device *dev;int ret =0 ; RPC_IFDEBUG(struct sockaddr *sap);@@ -462,12 +462,14 @@ static struct svc_xprt *svc_rdma_accept(struct svc_xprt *xprt) newxprt->sc_max_bc_requests =2 ; } -/* Arbitrarily estimate the number of rw_ctxs needed for -* this transport. This is enough rw_ctxs to make forward -* progress even if the client is using one rkey per page -* in each Read chunk. +/* Arbitrary estimate of the needed number of rdma_rw contexts. */
net/sunrpc/xprtrdma/svc_rdma_transport.c static struct svc_xprt *svc_rdma_accept(struct svc_xprt *xprt) · line 475
Quoted 10 lines
net/sunrpc/xprtrdma/svc_rdma_transport.c +6
-1- ctxts =3 *RPCSVC_MAXPAGES ; + maxpayload =min (xprt->xpt_server->sv_max_payload, +RPCSVC_MAXPAYLOAD_RDMA ); + ctxts = newxprt->sc_max_requests *3 * +rdma_rw_mr_factor (dev, newxprt->sc_port_num, + maxpayload >>PAGE_SHIFT ); + newxprt->sc_sq_depth = rq_depth + ctxts;if (newxprt->sc_sq_depth > dev->attrs.max_qp_wr) newxprt->sc_sq_depth = dev->attrs.max_qp_wr;
Re: [PATCH v5 07/19] NFSD: De-duplicate the svc_fill_write_vector() call sites
In reply to [email protected]Quoted 9 lines · On Fri, 2025-05-09 at 15:03 -0400, [email protected] wrote:
From: Chuck Lever <[email protected]>
All three call sites do the same thing.
I'm struggling with this a bit, however. struct
xdr_bufis an XDR layer object and unmarshaling a WRITE payload is clearly a task intended to be done by the proc and xdr functions, not by VFS. This feels vaguely like a layering violation.
I think it's fine.
Quoted 225 lines
Signed-off-by Chuck Lever <[email protected]>--- fs/nfsd/nfs3proc.c | 5 +--- fs/nfsd/nfs4proc.c | 8 ++---- fs/nfsd/nfsproc.c | 9 +++---- fs/nfsd/vfs.c | 52 +++++++++++++++++++++++++++++--------- fs/nfsd/vfs.h | 10 ++++---- include/linux/sunrpc/svc.h | 2 +- net/sunrpc/svc.c | 4 +-- 7 files changed, 54 insertions(+), 36 deletions(-)fs/nfsd/nfs3proc.c +1
-4@@ -220,7 +220,6 @@ nfsd3_proc_write(struct svc_rqst *rqstp)struct nfsd3_writeargs *argp = rqstp->rq_argp;struct nfsd3_writeres *resp = rqstp->rq_resp;unsigned long cnt = argp->len; -unsigned int nvecs; dprintk("nfsd: WRITE(3) %s %d bytes at %Lu%s\n", SVCFH_fmt(&argp->fh),@@ -235,10 +234,8 @@ nfsd3_proc_write(struct svc_rqst *rqstp)fh_copy (&resp->fh, &argp->fh); resp->committed = argp->stable; - nvecs =svc_fill_write_vector (rqstp, &argp->payload); - resp->status =nfsd_write (rqstp, &resp->fh, argp->offset, - rqstp->rq_vec, nvecs, &cnt, + &argp->payload, &cnt, resp->committed, resp->verf); resp->count = cnt; resp->status =nfsd3_map_status (resp->status);fs/nfsd/nfs4proc.c +2
-6@@ -1216,7 +1216,6 @@ nfsd4_write(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,struct nfsd_file *nf =NULL ;__be32 status = nfs_ok;unsigned long cnt; -int nvecs;if (write->wr_offset > (u64 )OFFSET_MAX || write->wr_offset + write->wr_buflen > (u64 )OFFSET_MAX )@@ -1231,12 +1230,9 @@ nfsd4_write(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate,return status; write->wr_how_written = write->wr_stable_how; - - nvecs =svc_fill_write_vector (rqstp, &write->wr_payload); - status =nfsd_vfs_write (rqstp, &cstate->current_fh, nf, - write->wr_offset, rqstp->rq_vec, nvecs, &cnt, - write->wr_how_written, + write->wr_offset, &write->wr_payload, + &cnt, write->wr_how_written, (__be32 *)write->wr_verifier.data);nfsd_file_put (nf);fs/nfsd/nfsproc.c +3
-6@@ -251,17 +251,14 @@ nfsd_proc_write(struct svc_rqst *rqstp)struct nfsd_writeargs *argp = rqstp->rq_argp;struct nfsd_attrstat *resp = rqstp->rq_resp;unsigned long cnt = argp->len; -unsigned int nvecs;dprintk ("nfsd: WRITE %s %u bytes at %d\n" ,SVCFH_fmt (&argp->fh), argp->len, argp->offset); - nvecs =svc_fill_write_vector (rqstp, &argp->payload); - - resp->status =nfsd_write (rqstp,fh_copy (&resp->fh, &argp->fh), - argp->offset, rqstp->rq_vec, nvecs, - &cnt,NFS_DATA_SYNC ,NULL ); +fh_copy (&resp->fh, &argp->fh); + resp->status =nfsd_write (rqstp, &resp->fh, argp->offset, + &argp->payload, &cnt,NFS_DATA_SYNC ,NULL );if (resp->status == nfs_ok) resp->status =fh_getattr (&resp->fh, &resp->stat);else if (resp->status == nfserr_jukebox)fs/nfsd/vfs.c +40
-12@@ -1143,11 +1143,27 @@ static int wait_for_concurrent_writes(struct file *file)return err; } +/** +* nfsd_vfs_write - write data to an already-open file +* @rqstp: RPC execution context +* @fhp: File handle of file to write into +* @nf: An open file matching @fhp +* @offset: Byte offset of start +* @payload: xdr_buf containing the write payload +* @cnt: IN: number of bytes to write, OUT: number of bytes actually written +* @stable: An NFS stable_how value +* @verf: NFS WRITE verifier +* +* Upon return, caller must invoke fh_put on @fhp. +* +* Return values: +* An nfsstat value in network byte order. +*/ __be32 -nfsd_vfs_write (struct svc_rqst *rqstp,struct svc_fh *fhp,struct nfsd_file *nf, -loff_t offset,struct kvec *vec,int vlen, -unsigned long *cnt,int stable, -__be32 *verf) +nfsd_vfs_write (struct svc_rqst *rqstp,struct svc_fh *fhp, +struct nfsd_file *nf,loff_t offset, +const struct xdr_buf *payload,unsigned long *cnt, +int stable,__be32 *verf) {struct nfsd_net *nn =net_generic (SVC_NET (rqstp), nfsd_net_id);struct file *file = nf->nf_file;@@ -1162,6 +1178,7 @@ nfsd_vfs_write(struct svc_rqst *rqstp, struct svc_fh *fhp, struct nfsd_file *nf,unsigned int pflags = current->flags;rwf_t flags =0 ;bool restore_flags = false; +unsigned int nvecs;trace_nfsd_write_opened (rqstp, fhp, offset, *cnt);@@ -1189,7 +1206,8 @@ nfsd_vfs_write(struct svc_rqst *rqstp, struct svc_fh *fhp, struct nfsd_file *nf,if (stable && !fhp->fh_use_wgather) flags |=RWF_SYNC ; -iov_iter_kvec (&iter,ITER_SOURCE , vec, vlen, *cnt); + nvecs =svc_fill_write_vector (rqstp, payload); +iov_iter_kvec (&iter,ITER_SOURCE , rqstp->rq_vec, nvecs, *cnt); since =READ_ONCE (file->f_wb_err);if (verf)nfsd_copy_write_verifier (verf, nn);@@ -1289,14 +1307,24 @@ __be32 nfsd_read(struct svc_rqst *rqstp, struct svc_fh *fhp,return err; } -/* -* Write data to a file. -* The stable flag requests synchronous writes. -* N.B. After this call fhp needs an fh_put +/** +* nfsd_write - open a file and write data to it +* @rqstp: RPC execution context +* @fhp: File handle of file to write into; nfsd_write() may modify it +* @offset: Byte offset of start +* @payload: xdr_buf containing the write payload +* @cnt: IN: number of bytes to write, OUT: number of bytes actually written +* @stable: An NFS stable_how value +* @verf: NFS WRITE verifier +* +* Upon return, caller must invoke fh_put on @fhp. +* +* Return values: +* An nfsstat value in network byte order. */ __be32 nfsd_write (struct svc_rqst *rqstp,struct svc_fh *fhp,loff_t offset, -struct kvec *vec,int vlen,unsigned long *cnt,int stable, +const struct xdr_buf *payload,unsigned long *cnt,int stable,__be32 *verf) {struct nfsd_file *nf;@@ -1308,8 +1336,8 @@ nfsd_write(struct svc_rqst *rqstp, struct svc_fh *fhp, loff_t offset,if (err) goto out; - err =nfsd_vfs_write (rqstp, fhp, nf, offset, vec, - vlen, cnt, stable, verf); + err =nfsd_vfs_write (rqstp, fhp, nf, offset, payload, cnt, + stable, verf);nfsd_file_put (nf); out:trace_nfsd_write_done (rqstp, fhp, offset, *cnt);fs/nfsd/vfs.h +5
-5@@ -128,13 +128,13 @@ bool nfsd_read_splice_ok(struct svc_rqst *rqstp);__be32 nfsd_read (struct svc_rqst *rqstp,struct svc_fh *fhp,loff_t offset,unsigned long *count,u32 *eof); -__be32 nfsd_write (struct svc_rqst *,struct svc_fh *,loff_t , -struct kvec *,int ,unsigned long *, -int stable,__be32 *verf); +__be32 nfsd_write (struct svc_rqst *rqstp,struct svc_fh *fhp, +loff_t offset,const struct xdr_buf *payload, +unsigned long *cnt,int stable,__be32 *verf);__be32 nfsd_vfs_write (struct svc_rqst *rqstp,struct svc_fh *fhp,struct nfsd_file *nf,loff_t offset, -struct kvec *vec,int vlen,unsigned long *cnt, -int stable,__be32 *verf); +const struct xdr_buf *payload, +unsigned long *cnt,int stable,__be32 *verf);__be32 nfsd_readlink (struct svc_rqst *,struct svc_fh *,char *,int *); __be32 nfsd_symlink(struct svc_rqst *, struct svc_fh *,include/linux/sunrpc/svc.h +1
-1@@ -471,7 +471,7 @@ int svc_encode_result_payload(struct svc_rqst *rqstp,unsigned int offset, unsigned int length);unsigned int svc_fill_write_vector (struct svc_rqst *rqstp, -struct xdr_buf *payload); +const struct xdr_buf *payload);char *svc_fill_symlink_pathname (struct svc_rqst *rqstp,struct kvec *first,void *p,size_t total);net/sunrpc/svc.c +0
-0@@ -1727,10 +1727,10 @@ EXPORT_SYMBOL_GPL(svc_encode_result_payload);* Fills in rqstp::rq_vec, and returns the number of elements. */
net/sunrpc/svc.c EXPORT_SYMBOL_GPL(svc_encode_result_payload); · line 1736
Quoted 10 lines
net/sunrpc/svc.c +2
-2unsigned int svc_fill_write_vector (struct svc_rqst *rqstp, -struct xdr_buf *payload) +const struct xdr_buf *payload) { +const struct kvec *first = payload->head;struct page **pages = payload->pages; -struct kvec *first = payload->head;struct kvec *vec = rqstp->rq_vec;size_t total = payload->len;unsigned int i;
Quoted 70 lines · On Fri, 2025-05-09 at 15:03 -0400, [email protected] wrote:
From: Chuck Lever <[email protected]>
In order to make
RPCSVC_MAXPAYLOADlarger (or variable in size), we need to do something clever with the payload arrays embedded in structsvc_rqstand elsewhere.My preference is to keep these arrays allocated all the time because allocating them on demand increases the risk of a memory allocation failure during a large I/O. This is a quick-and-dirty approach that might be replaced once NFSD is converted to use large folios.
The downside of this design choice is that it pins a few pages per NFSD thread (and that's the current situation already). But note that because
RPCSVC_MAXPAGESis 259, each array is just over a page in size, making the allocation waste quite a bit of memory beyond the end of the array due to power-of-2 allocator round up. This gets worse as the MAXPAGES value is doubled or quadrupled.This series also addresses similar issues in the socket and RDMA transports.
Changes since v4:
* Replace the use ofrq_vecinstead of allocating it dynamicallyChanges since v3:
* Improved therdma_rwcontext count estimate
* Dropped "NFSD: RemoveNFSSVC_MAXBLKSIZEfrom .pc_xdrressize"
* Cleaned up the max size macros a bit
* Completed the implementation of adjustablemax_block_sizeChanges since v2:
* Address Jeff's review comments
* Address Neil's review comments
* Start removing a few uses ofNFSSVC_MAXBLKSIZEChuck Lever (19):
svcrdma: Reduce the number ofrdma_rwcontexts per-QP
sunrpc: Add a helper to derive maxpages fromsv_max_mesg
sunrpc: Remove backchannel check insvc_init_buffer()
sunrpc: Replace therq_pagesarray with dynamically-allocated memory
sunrpc: Replace therq_bvecarray with dynamically-allocated memory
NFSD: Userqstp->rq_bvecinnfsd_iter_read()
NFSD: De-duplicate thesvc_fill_write_vector()call sites
SUNRPC: Exportxdr_buf_to_bvec()
NFSD: Userqstp->rq_bvecinnfsd_iter_write()
SUNRPC: Removesvc_fill_write_vector()
SUNRPC: Removesvc_rqst::rq_vec
sunrpc: Adjust size of socket's receive page array dynamically
svcrdma: Adjust the number of entries insvc_rdma_recv_ctxt::rc_pages
svcrdma: Adjust the number of entries insvc_rdma_send_ctxt::sc_pages
sunrpc: Remove theRPCSVC_MAXPAGESmacro
NFSD: RemoveNFSD_BUFSIZE
NFSD: RemoveNFSSVC_MAXBLKSIZE_V2macro
NFSD: Add a "default" block size
SUNRPC: Bump the maximum payload size for the serverfs/nfsd/nfs3proc.c | 5 +- fs/nfsd/nfs4proc.c | 10 +-- fs/nfsd/nfs4state.c | 2 +- fs/nfsd/nfs4xdr.c | 2 +- fs/nfsd/nfsd.h | 24 +++---- fs/nfsd/nfsproc.c | 13 ++-- fs/nfsd/nfssvc.c | 2 +- fs/nfsd/nfsxdr.c | 4 +- fs/nfsd/vfs.c | 67 ++++++++++++++------ fs/nfsd/vfs.h | 10 +-- include/linux/sunrpc/svc.h | 46 ++++++++------ include/linux/sunrpc/svc_rdma.h | 6 +- include/linux/sunrpc/svcsock.h | 4 +- net/sunrpc/svc.c | 80 +++++++-----------------
Quoted 8 lines
net/sunrpc/svc_xprt.c | 10 +-- net/sunrpc/svcsock.c | 15 +++-- net/sunrpc/xdr.c | 1 + net/sunrpc/xprtrdma/svc_rdma_recvfrom.c | 8 ++- net/sunrpc/xprtrdma/svc_rdma_rw.c | 2 +- net/sunrpc/xprtrdma/svc_rdma_sendto.c | 16 ++++- net/sunrpc/xprtrdma/svc_rdma_transport.c | 14 +++-- 21 files changed, 170 insertions(+), 171 deletions(-)
This all looks good to me. You can add this to 8-10 and 18:
Chuck Lever
maintainerRe: [PATCH v5 19/19] SUNRPC: Bump the maximum payload size for the server
In reply to Aurélien CoudercQuoted 10 lines · Aurélien Couderc
Quoted 9 lines · Chuck Lever
Quoted 2 lines · Aurélien Couderc
Could this patch series - minus the change to the default of 1MB - be promoted to Linux 6.6 LongTermSupport, please?
It has to be merged upstream first.
But, new features are generally not backported to stable. At this time, this feature is intended only for future kernels.
To be utterly clear, I don't set the rules about what goes into the LTS kernels.
Quoted 6 lines
1. I could argue that this patch series - minus the change to the default of 1MB - is a "necessary cleanup", removing half broken buffer size limits
2. The patch series makes/proc/fs/nfsd/max_block_sizeusableIMO this qualifies the patch series for stable@
I'm not aware of any misbehavior in this area that qualifies as a security issue, a crasher, or a performance regression. Those are the kind of issues that would qualify this series for backport.
Signature · 1 line
Chuck Lever
NeilBrown
reviewerRe: [PATCH v5 19/19] SUNRPC: Bump the maximum payload size for the server
In reply to Aurélien CoudercQuoted 11 lines · Aurélien Couderc
Quoted 9 lines · Chuck Lever
Quoted 2 lines · Aurélien Couderc
Could this patch series - minus the change to the default of 1MB - be promoted to Linux 6.6 LongTermSupport, please?
It has to be merged upstream first.
But, new features are generally not backported to stable. At this time, this feature is intended only for future kernels.
Quoted 6 lines
1. I could argue that this patch series - minus the change to the default of 1MB - is a "necessary cleanup", removing half broken buffer size limits
2. The patch series makes/proc/fs/nfsd/max_block_sizeusableIMO this qualifies the patch series for stable@
I'm curious - why do you want it in stable?
If you just want the functionality you can apply the patches yourself, or ask your kernel vendor to do that for you. What do you gain by having us submit them to stable@?
Thanks,
NeilBrown