Skip to contentSkip to conversation

rust: Use patchelf in place of chrpath to edit rpaths

PATCH Superseded Khem Raj 2 participants 3 messages May 17, 2025 – May 19, 2025

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore

Khem Raj

author
#0 lore raw

PATCH 1/1 rust: Use patchelf in place of chrpath to edit rpaths

chrpath has limitations e.g. the original rpath in ELF have to bigger in size than the one being edited into it by chrpath, some toolchains do not use RPATH but emit the RUNPATHs into ELF files and chrpath is not able to handle the runpaths, this is the case with mips and pp32 build of rust, especially when using clang compiler to build them.

patchelf can do more:

Modify RUNPATH entries
Add RPATH/RUNPATH where none existed
Set longer paths than the original
Convert between RPATH and RUNPATH

---
 meta/recipes-devtools/rust/rust_1.85.1.bb | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
meta/recipes-devtools/rust/rust_1.85.1.bb +4 -4
index dc4f5648552..3b7226ae408 100644
@@ -207,9 +207,9 @@ rust_runx () {
         mkdir -p `dirname ${RUST_ALTERNATE_EXE_PATH}`
         cp ${RUST_ALTERNATE_EXE_PATH_NATIVE} ${RUST_ALTERNATE_EXE_PATH}
         if [ -e ${STAGING_LIBDIR_NATIVE}/libc++.so.1 ]; then
-            chrpath -r \$ORIGIN/../../../../../`basename ${STAGING_DIR_NATIVE}`${libdir_native} ${RUST_ALTERNATE_EXE_PATH}
+            patchelf-uninative --set-rpath \$ORIGIN/../../../../../`basename ${STAGING_DIR_NATIVE}`${libdir_native} ${RUST_ALTERNATE_EXE_PATH}
         else
-            chrpath -d ${RUST_ALTERNATE_EXE_PATH}
+            patchelf-uninative --remove-rpath ${RUST_ALTERNATE_EXE_PATH}
         fi
     fi
 
@@ -266,7 +266,7 @@ rust_do_install:class-nativesdk() {
     install -d ${D}${bindir}
     for i in cargo-clippy clippy-driver rustfmt; do
         cp build/${RUST_BUILD_SYS}/stage2-tools/${RUST_HOST_SYS}/release/$i ${D}${bindir}
-        chrpath -r "\$ORIGIN/../lib" ${D}${bindir}/$i
+        patchelf-uninative --set-rpath "\$ORIGIN/../lib" ${D}${bindir}/$i
     done
 
     chown root:root ${D}/ -R
@@ -301,7 +301,7 @@ rust_do_install:class-target() {
     install -d ${D}${bindir}
     for i in ${EXTRA_TOOLS}; do
         cp build/${RUST_BUILD_SYS}/stage2-tools/${RUST_HOST_SYS}/release/$i ${D}${bindir}
-        chrpath -r "\$ORIGIN/../lib" ${D}${bindir}/$i
+        patchelf-uninative --set-rpath "\$ORIGIN/../lib" ${D}${bindir}/$i
     done
 
     install -d ${D}${libdir}/rustlib/${RUST_HOST_SYS}
#1 lore raw

I don't think patchelf-uninative is available if uninative is not in use. Probably better to DEPENDS += "patchelf-native" instead

Quoted 62 lines · Khem Raj via lists.openembedded.org

chrpath has limitations e.g. the original rpath in ELF have to bigger in size than the one being edited into it by chrpath, some toolchains do not use RPATH but emit the RUNPATHs into ELF files and chrpath is not able to handle the runpaths, this is the case with mips and pp32 build of rust, especially when using clang compiler to build them.

patchelf can do more:

Modify RUNPATH entries
Add RPATH/RUNPATH where none existed
Set longer paths than the original
Convert between RPATH and RUNPATH

---
 meta/recipes-devtools/rust/rust_1.85.1.bb | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
meta/recipes-devtools/rust/rust_1.85.1.bb +4 -5
index dc4f5648552..3b7226ae408 100644
@@ -207,9 +207,9 @@ rust_runx () {
         mkdir -p `dirname ${RUST_ALTERNATE_EXE_PATH}`
         cp ${RUST_ALTERNATE_EXE_PATH_NATIVE} ${RUST_ALTERNATE_EXE_PATH}
         if [ -e ${STAGING_LIBDIR_NATIVE}/libc++.so.1 ]; then
-            chrpath -r \$ORIGIN/../../../../../`basename ${STAGING_DIR_NATIVE}`${libdir_native} ${RUST_ALTERNATE_EXE_PATH}
+            patchelf-uninative --set-rpath \$ORIGIN/../../../../../`basename ${STAGING_DIR_NATIVE}`${libdir_native} ${RUST_ALTERNATE_EXE_PATH}
         else
-            chrpath -d ${RUST_ALTERNATE_EXE_PATH}
+            patchelf-uninative --remove-rpath ${RUST_ALTERNATE_EXE_PATH}
         fi
     fi
 
@@ -266,7 +266,7 @@ rust_do_install:class-nativesdk() {
     install -d ${D}${bindir}
     for i in cargo-clippy clippy-driver rustfmt; do
         cp build/${RUST_BUILD_SYS}/stage2-tools/${RUST_HOST_SYS}/release/$i ${D}${bindir}
-        chrpath -r "\$ORIGIN/../lib" ${D}${bindir}/$i
+        patchelf-uninative --set-rpath "\$ORIGIN/../lib" ${D}${bindir}/$i
     done
 
     chown root:root ${D}/ -R
@@ -301,7 +301,7 @@ rust_do_install:class-target() {
     install -d ${D}${bindir}
     for i in ${EXTRA_TOOLS}; do
         cp build/${RUST_BUILD_SYS}/stage2-tools/${RUST_HOST_SYS}/release/$i ${D}${bindir}
-        chrpath -r "\$ORIGIN/../lib" ${D}${bindir}/$i
+        patchelf-uninative --set-rpath "\$ORIGIN/../lib" ${D}${bindir}/$i
     done
 
     install -d ${D}${libdir}/rustlib/${RUST_HOST_SYS}
 
-=-=-=-=-=-=-=-=-=-=-=-

Links: You receive all messages sent to this group.
View/Reply Online (#216772): https://lists.openembedded.org/g/openembedded-core/message/216772
Mute This Topic: https://lists.openembedded.org/mt/113168136/3616693
Group Owner: [email protected]
Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-

author
#2 lore raw
Quoted 4 lines · Joshua Watt

I don't think patchelf-uninative is available if uninative is not in use. Probably better to DEPENDS += "patchelf-native" instead

there was another place in rust recipe using patchelf from uninative but this perhaps makes sense.

Quoted 64 lines
Quoted 62 lines · Khem Raj via lists.openembedded.org

chrpath has limitations e.g. the original rpath in ELF have to bigger in size than the one being edited into it by chrpath, some toolchains do not use RPATH but emit the RUNPATHs into ELF files and chrpath is not able to handle the runpaths, this is the case with mips and pp32 build of rust, especially when using clang compiler to build them.

patchelf can do more:

Modify RUNPATH entries
Add RPATH/RUNPATH where none existed
Set longer paths than the original
Convert between RPATH and RUNPATH

---
 meta/recipes-devtools/rust/rust_1.85.1.bb | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
meta/recipes-devtools/rust/rust_1.85.1.bb +4 -5
index dc4f5648552..3b7226ae408 100644
@@ -207,9 +207,9 @@ rust_runx () {
         mkdir -p `dirname ${RUST_ALTERNATE_EXE_PATH}`
         cp ${RUST_ALTERNATE_EXE_PATH_NATIVE} ${RUST_ALTERNATE_EXE_PATH}
         if [ -e ${STAGING_LIBDIR_NATIVE}/libc++.so.1 ]; then
-            chrpath -r \$ORIGIN/../../../../../`basename ${STAGING_DIR_NATIVE}`${libdir_native} ${RUST_ALTERNATE_EXE_PATH}
+            patchelf-uninative --set-rpath \$ORIGIN/../../../../../`basename ${STAGING_DIR_NATIVE}`${libdir_native} ${RUST_ALTERNATE_EXE_PATH}
         else
-            chrpath -d ${RUST_ALTERNATE_EXE_PATH}
+            patchelf-uninative --remove-rpath ${RUST_ALTERNATE_EXE_PATH}
         fi
     fi
 
@@ -266,7 +266,7 @@ rust_do_install:class-nativesdk() {
     install -d ${D}${bindir}
     for i in cargo-clippy clippy-driver rustfmt; do
         cp build/${RUST_BUILD_SYS}/stage2-tools/${RUST_HOST_SYS}/release/$i ${D}${bindir}
-        chrpath -r "\$ORIGIN/../lib" ${D}${bindir}/$i
+        patchelf-uninative --set-rpath "\$ORIGIN/../lib" ${D}${bindir}/$i
     done
 
     chown root:root ${D}/ -R
@@ -301,7 +301,7 @@ rust_do_install:class-target() {
     install -d ${D}${bindir}
     for i in ${EXTRA_TOOLS}; do
         cp build/${RUST_BUILD_SYS}/stage2-tools/${RUST_HOST_SYS}/release/$i ${D}${bindir}
-        chrpath -r "\$ORIGIN/../lib" ${D}${bindir}/$i
+        patchelf-uninative --set-rpath "\$ORIGIN/../lib" ${D}${bindir}/$i
     done
 
     install -d ${D}${libdir}/rustlib/${RUST_HOST_SYS}
 
-=-=-=-=-=-=-=-=-=-=-=-

Links: You receive all messages sent to this group.
View/Reply Online (#216772): https://lists.openembedded.org/g/openembedded-core/message/216772
Mute This Topic: https://lists.openembedded.org/mt/113168136/3616693
Group Owner: [email protected]
Unsubscribe: https://lists.openembedded.org/g/openembedded-core/unsub [[email protected]]
-=-=-=-=-=-=-=-=-=-=-=-