dt-bindings: clock: Convert cirrus,ep7209-clk to DT schema
Subsystems (2)
Rob Herring (Arm)
maintainerPATCH 1/1 dt-bindings: clock: Convert cirrus,ep7209-clk to DT schema
Convert the Cirrus EP7xxx (aka CLPS711x) binding to DT schema format. It's a straight forward conversion.
Signed-off-by Rob Herring (Arm) <[email protected]>
--- .../bindings/clock/cirrus,ep7209-clk.yaml | 47 +++++++++++++++++++ .../bindings/clock/clps711x-clock.txt | 19 -------- 2 files changed, 47 insertions(+), 19 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/cirrus,ep7209-clk.yaml delete mode 100644 Documentation/devicetree/bindings/clock/clps711x-clock.txt
Documentation/devicetree/bindings/clock/cirrus,ep7209-clk.yaml new file +47 -0
@@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/cirrus,ep7209-clk.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic CLPS711X Clock Controller + +maintainers: + - Alexander Shiyan <[email protected]> + +description: + See include/dt-bindings/clock/clps711x-clock.h for the full list of CLPS711X + clock IDs. + +properties: + compatible: + items: + - const: cirrus,ep7312-clk + - const: cirrus,ep7209-clk + + reg: + maxItems: 1 + + startup-frequency: + description: Factory set CPU startup frequency in HZ. + $ref: /schemas/types.yaml#/definitions/uint32 + + "#clock-cells": + const: 1 + +required: + - compatible + - reg + - startup-frequency + - "#clock-cells" + +additionalProperties: false + +examples: + - | + clock-controller@80000000 { + compatible = "cirrus,ep7312-clk", "cirrus,ep7209-clk"; + reg = <0x80000000 0xc000>; + #clock-cells = <1>; + startup-frequency = <73728000>; + };
Documentation/devicetree/bindings/clock/clps711x-clock.txt deleted +0 -19
@@ -1,19 +0,0 @@ -* Clock bindings for the Cirrus Logic CLPS711X CPUs - -Required properties: -- compatible : Shall contain "cirrus,ep7209-clk". -- reg : Address of the internal register set. -- startup-frequency: Factory set CPU startup frequency in HZ. -- #clock-cells : Should be <1>. - -The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. See include/dt-bindings/clock/clps711x-clock.h -for the full list of CLPS711X clock IDs. - -Example: - clks: clks@80000000 { - #clock-cells = <1>; - compatible = "cirrus,ep7312-clk", "cirrus,ep7209-clk"; - reg = <0x80000000 0xc000>; - startup-frequency = <73728000>; - };
Signature · 1 line
2.47.2
Quoting Rob Herring (Arm) (2025-05-20 17:49:22)
Quoted 5 lines
Convert the Cirrus EP7xxx (aka CLPS711x) binding to DT schema format. It's a straight forward conversion.
Signed-off-by Rob Herring (Arm) <[email protected]>---
Applied to clk-next