KVM: x86: allow DEBUGCTL.DEBUGCTLMSR_FREEZE_IN_SMM passthrough
Subsystems (4)
v5 cover KVM: x86: allow DEBUGCTL.DEBUGCTLMSR_FREEZE_IN_SMM passthrough
Currently KVM allows the guest to set IA32_DEBUGCTL to whatever value the guest wants, only capped by a bitmask of allowed bits
(except in the nested entry where KVM apparently doesn't even check this set of allowed bits - this patch series also fixes that)
However some IA32_DEBUGCTL bits can be useful for the host, e.g the IA32_DEBUGCTL.DEBUGCTLMSR_FREEZE_IN_SMM which isolates the PMU from the influence of the host's SMM.
Reshuffle some of the code to allow (currently only this bit) to be passed though from its host value to the guest.
Note that host value of this bit can be toggled by writing 0 or 1 to /sys/devices/cpu/freeze_on_smi
This was tested on a Intel(R) Xeon(R) Silver 4410Y with KVM unit tests and kvm selftests running in parallel with tight loop writing to IO port 0xB2 which on this machine generates #SMIs.
SMI generation was also verified also by reading the MSR 0x34 which shows the current count of #SMIs received.
Despite the flood of #SMIs, the tests survived with this patch applied.
V5: addressed the review feedback. Thanks.
I also decided to wrap the read/write of the GUEST_IA32_DEBUGCTL in pmu_intel.c as well, just for the sake of consistency.
Best regards,
Maxim Levitsky
Maxim Levitsky (3):
KVM: nVMX: check vmcs12->guest_ia32_debugctl value given by L2
KVM: VMX: wrap guest access to IA32_DEBUGCTL with wrappers
KVM: VMX: preserve DEBUGCTLMSR_FREEZE_IN_SMM
Sean Christopherson (2):
KVM: x86: Convert vcpu_run()'s immediate exit param into a generic
bitmap
KVM: x86: Drop kvm_x86_ops.set_dr6() in favor of a new KVM_RUN flag
arch/x86/include/asm/kvm-x86-ops.h | 1 - arch/x86/include/asm/kvm_host.h | 9 ++++++-- arch/x86/kvm/svm/svm.c | 14 +++++++----- arch/x86/kvm/vmx/main.c | 15 +++---------- arch/x86/kvm/vmx/nested.c | 7 +++--- arch/x86/kvm/vmx/pmu_intel.c | 8 +++---- arch/x86/kvm/vmx/tdx.c | 3 ++- arch/x86/kvm/vmx/vmx.c | 36 +++++++++++++++++++++--------- arch/x86/kvm/vmx/vmx.h | 3 +++ arch/x86/kvm/vmx/x86_ops.h | 4 ++-- arch/x86/kvm/x86.c | 18 ++++++++++----- 11 files changed, 71 insertions(+), 47 deletions(-)
Signature · 1 line
2.46.0
PATCH v5 1/5 KVM: x86: Convert vcpu_run()'s immediate exit param into a generic bitmap
From: Sean Christopherson <[email protected]>
--- arch/x86/include/asm/kvm_host.h | 6 +++++- arch/x86/kvm/svm/svm.c | 4 ++-- arch/x86/kvm/vmx/main.c | 6 +++--- arch/x86/kvm/vmx/tdx.c | 3 ++- arch/x86/kvm/vmx/vmx.c | 3 ++- arch/x86/kvm/vmx/x86_ops.h | 4 ++-- arch/x86/kvm/x86.c | 11 ++++++++--- 7 files changed, 24 insertions(+), 13 deletions(-)
arch/x86/include/asm/kvm_host.h +5 -1
@@ -1671,6 +1671,10 @@ static inline u16 kvm_lapic_irq_dest_mode(bool dest_mode_logical)return dest_mode_logical ?APIC_DEST_LOGICAL :APIC_DEST_PHYSICAL ; } +enum kvm_x86_run_flags { +KVM_RUN_FORCE_IMMEDIATE_EXIT =BIT (0 ), +}; +struct kvm_x86_ops {const char *name;
@@ -1752,7 +1756,7 @@ struct kvm_x86_ops {int (*vcpu_pre_run)(struct kvm_vcpu *vcpu);enum exit_fastpath_completion (*vcpu_run)(struct kvm_vcpu *vcpu, -bool force_immediate_exit); +u64 run_flags);int (*handle_exit)(struct kvm_vcpu *vcpu,enum exit_fastpath_completion exit_fastpath);int (*skip_emulated_instruction)(struct kvm_vcpu *vcpu);
arch/x86/kvm/svm/svm.c +2 -2
@@ -4259,9 +4259,9 @@ static noinstr void svm_vcpu_enter_exit(struct kvm_vcpu *vcpu, bool spec_ctrl_inguest_state_exit_irqoff (); } -static __no_kcsan fastpath_t svm_vcpu_run(struct kvm_vcpu *vcpu, -bool force_immediate_exit) +static __no_kcsan fastpath_t svm_vcpu_run(struct kvm_vcpu *vcpu, u64 run_flags) { +bool force_immediate_exit = run_flags &KVM_RUN_FORCE_IMMEDIATE_EXIT ;struct vcpu_svm *svm =to_svm (vcpu);bool spec_ctrl_intercepted =msr_write_intercepted (vcpu,MSR_IA32_SPEC_CTRL );
arch/x86/kvm/vmx/main.c +3 -3
@@ -176,12 +176,12 @@ static int vt_vcpu_pre_run(struct kvm_vcpu *vcpu)return vmx_vcpu_pre_run (vcpu); } -static fastpath_t vt_vcpu_run (struct kvm_vcpu *vcpu,bool force_immediate_exit) +static fastpath_t vt_vcpu_run (struct kvm_vcpu *vcpu,u64 run_flags) {if (is_td_vcpu (vcpu)) -return tdx_vcpu_run (vcpu, force_immediate_exit); +return tdx_vcpu_run (vcpu, run_flags); -return vmx_vcpu_run (vcpu, force_immediate_exit); +return vmx_vcpu_run (vcpu, run_flags); } static int vt_handle_exit(struct kvm_vcpu *vcpu,
arch/x86/kvm/vmx/tdx.c +2 -1
@@ -1020,8 +1020,9 @@ static void tdx_load_host_xsave_state(struct kvm_vcpu *vcpu) DEBUGCTLMSR_FREEZE_PERFMON_ON_PMI | \ DEBUGCTLMSR_FREEZE_IN_SMM) -fastpath_t tdx_vcpu_run (struct kvm_vcpu *vcpu,bool force_immediate_exit) +fastpath_t tdx_vcpu_run (struct kvm_vcpu *vcpu,u64 run_flags) { +bool force_immediate_exit = run_flags &KVM_RUN_FORCE_IMMEDIATE_EXIT ;struct vcpu_tdx *tdx =to_tdx (vcpu);struct vcpu_vt *vt =to_vt (vcpu);
arch/x86/kvm/vmx/vmx.c +2 -1
@@ -7324,8 +7324,9 @@ static noinstr void vmx_vcpu_enter_exit(struct kvm_vcpu *vcpu,guest_state_exit_irqoff (); } -fastpath_t vmx_vcpu_run (struct kvm_vcpu *vcpu,bool force_immediate_exit) +fastpath_t vmx_vcpu_run (struct kvm_vcpu *vcpu,u64 run_flags) { +bool force_immediate_exit = run_flags &KVM_RUN_FORCE_IMMEDIATE_EXIT ;struct vcpu_vmx *vmx =to_vmx (vcpu);unsigned long cr3, cr4;
arch/x86/kvm/vmx/x86_ops.h +2 -2
@@ -21,7 +21,7 @@ void vmx_vm_destroy(struct kvm *kvm);int vmx_vcpu_precreate (struct kvm *kvm);int vmx_vcpu_create (struct kvm_vcpu *vcpu);int vmx_vcpu_pre_run (struct kvm_vcpu *vcpu); -fastpath_t vmx_vcpu_run (struct kvm_vcpu *vcpu,bool force_immediate_exit); +fastpath_t vmx_vcpu_run (struct kvm_vcpu *vcpu,u64 run_flags);void vmx_vcpu_free (struct kvm_vcpu *vcpu);void vmx_vcpu_reset (struct kvm_vcpu *vcpu,bool init_event);void vmx_vcpu_load (struct kvm_vcpu *vcpu,int cpu);
@@ -132,7 +132,7 @@ void tdx_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event);void tdx_vcpu_free (struct kvm_vcpu *vcpu);void tdx_vcpu_load (struct kvm_vcpu *vcpu,int cpu);int tdx_vcpu_pre_run (struct kvm_vcpu *vcpu); -fastpath_t tdx_vcpu_run (struct kvm_vcpu *vcpu,bool force_immediate_exit); +fastpath_t tdx_vcpu_run (struct kvm_vcpu *vcpu,u64 run_flags);void tdx_prepare_switch_to_guest (struct kvm_vcpu *vcpu);void tdx_vcpu_put (struct kvm_vcpu *vcpu);bool tdx_protected_apic_has_interrupt (struct kvm_vcpu *vcpu);
arch/x86/kvm/x86.c +8 -3
@@ -10752,6 +10752,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)dm_request_for_irq_injection (vcpu) &&kvm_cpu_accept_dm_intr (vcpu);fastpath_t exit_fastpath; +u64 run_flags;bool req_immediate_exit = false;
@@ -10996,8 +10997,11 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu) goto cancel_injection; } -if (req_immediate_exit) + run_flags =0 ; +if (req_immediate_exit) { + run_flags |=KVM_RUN_FORCE_IMMEDIATE_EXIT ;kvm_make_request (KVM_REQ_EVENT , vcpu); + }fpregs_assert_state_consistent ();if (test_thread_flag (TIF_NEED_FPU_LOAD ))
@@ -11034,8 +11038,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)WARN_ON_ONCE ((kvm_vcpu_apicv_activated (vcpu) !=kvm_vcpu_apicv_active (vcpu)) && (kvm_get_apic_mode (vcpu) !=LAPIC_MODE_DISABLED )); - exit_fastpath =kvm_x86_call (vcpu_run)(vcpu, - req_immediate_exit); + exit_fastpath =kvm_x86_call (vcpu_run)(vcpu, run_flags);if (likely (exit_fastpath !=EXIT_FASTPATH_REENTER_GUEST ))break ;
@@ -11047,6 +11050,8 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)break ; } + run_flags =0 ; +/* Note, VM-Exits that go down the "slow" path are accounted below. */ ++vcpu->stat.exits; }
Signature · 1 line
2.46.0
Sean Christopherson
maintainerRe: [PATCH v5 1/5] KVM: x86: Convert vcpu_run()'s immediate exit param into a generic bitmap
arch/x86/kvm/vmx/tdx.c static void tdx_load_host_xsave_state(struct kvm_vcpu *vcpu) · line 1025
Quoted 13 lines · Maxim Levitsky
---
arch/x86/kvm/vmx/tdx.c +2
-1@@ -1020,8 +1020,9 @@ static void tdx_load_host_xsave_state(struct kvm_vcpu *vcpu) DEBUGCTLMSR_FREEZE_PERFMON_ON_PMI | \ DEBUGCTLMSR_FREEZE_IN_SMM) -fastpath_t tdx_vcpu_run (struct kvm_vcpu *vcpu,bool force_immediate_exit) +fastpath_t tdx_vcpu_run (struct kvm_vcpu *vcpu,u64 run_flags) { +bool force_immediate_exit = run_flags &KVM_RUN_FORCE_IMMEDIATE_EXIT ;
Talking to myself, but I think it makes sense to drop the local force_immediate_exit entirely, specifically so that the WARN_ON_ONCE() can just yell on run_flags being non-zero. All immediate usage of run_flags is mutually exclusive with TDX.
arch/x86/kvm/vmx/tdx.c +9 -9
@@ -1018,20 +1018,20 @@ static void tdx_load_host_xsave_state(struct kvm_vcpu *vcpu) DEBUGCTLMSR_FREEZE_PERFMON_ON_PMI | \ DEBUGCTLMSR_FREEZE_IN_SMM) -fastpath_t tdx_vcpu_run (struct kvm_vcpu *vcpu,bool force_immediate_exit) +fastpath_t tdx_vcpu_run (struct kvm_vcpu *vcpu,u64 run_flags) {struct vcpu_tdx *tdx =to_tdx (vcpu);struct vcpu_vt *vt =to_vt (vcpu);/* -* force_immediate_exit requires vCPU entering for events injection with -* an immediately exit followed. But The TDX module doesn't guarantee -* entry, it's already possible for KVM to _think_ it completely entry -* to the guest without actually having done so. -* Since KVM never needs to force an immediate exit for TDX, and can't -* do direct injection, just warn on force_immediate_exit. +* WARN if KVM wants to force an immediate exit, as the TDX module does +* not guarantee entry into the guest, i.e. it's possible for KVM to +* _think_ it completed entry to the guest and forced an immediate exit +* without actually having done so. Luckily, KVM never needs to force +* an immediate exit for TDX (KVM can't do direct event injection, so +* just WARN and continue on. */ -WARN_ON_ONCE (force_immediate_exit); +WARN_ON_ONCE (run_flags);/* * Wait until retry of SEPT-zap-related SEAMCALL completes before
@@ -1041,7 +1041,7 @@ fastpath_t tdx_vcpu_run(struct kvm_vcpu *vcpu, bool force_immediate_exit)if (unlikely (READ_ONCE (to_kvm_tdx (vcpu->kvm)->wait_for_sept_zap)))return EXIT_FASTPATH_EXIT_HANDLED ; -trace_kvm_entry (vcpu, force_immediate_exit); +trace_kvm_entry (vcpu, run_flags &KVM_RUN_FORCE_IMMEDIATE_EXIT );if (pi_test_on (&vt->pi_desc)) { apic->send_IPI_self (POSTED_INTR_VECTOR );
PATCH v5 2/5 KVM: x86: Drop kvm_x86_ops.set_dr6() in favor of a new KVM_RUN flag
In reply to Maxim LevitskyFrom: Sean Christopherson <[email protected]>
Instruct vendor code to load the guest's DR6 into hardware via a new KVM_RUN flag, and remove kvm_x86_ops.set_dr6(), whose sole purpose was to load vcpu->arch.dr6 into hardware when DR6 can be read/written directly by the guest.
--- arch/x86/include/asm/kvm-x86-ops.h | 1 - arch/x86/include/asm/kvm_host.h | 2 +- arch/x86/kvm/svm/svm.c | 10 ++++++---- arch/x86/kvm/vmx/main.c | 9 --------- arch/x86/kvm/vmx/vmx.c | 9 +++------ arch/x86/kvm/x86.c | 2 +- 6 files changed, 11 insertions(+), 22 deletions(-)
arch/x86/include/asm/kvm-x86-ops.h +0 -1
@@ -49,7 +49,6 @@ KVM_X86_OP(set_idt) KVM_X86_OP(get_gdt) KVM_X86_OP(set_gdt) KVM_X86_OP(sync_dirty_debug_regs) -KVM_X86_OP(set_dr6) KVM_X86_OP(set_dr7) KVM_X86_OP(cache_reg) KVM_X86_OP(get_rflags)
arch/x86/include/asm/kvm_host.h +1 -1
@@ -1673,6 +1673,7 @@ static inline u16 kvm_lapic_irq_dest_mode(bool dest_mode_logical)enum kvm_x86_run_flags {KVM_RUN_FORCE_IMMEDIATE_EXIT =BIT (0 ), +KVM_RUN_LOAD_GUEST_DR6 =BIT (1 ), };struct kvm_x86_ops {
@@ -1725,7 +1726,6 @@ struct kvm_x86_ops {void (*get_gdt)(struct kvm_vcpu *vcpu,struct desc_ptr *dt);void (*set_gdt)(struct kvm_vcpu *vcpu,struct desc_ptr *dt);void (*sync_dirty_debug_regs)(struct kvm_vcpu *vcpu); -void (*set_dr6)(struct kvm_vcpu *vcpu,unsigned long value);void (*set_dr7)(struct kvm_vcpu *vcpu,unsigned long value);void (*cache_reg)(struct kvm_vcpu *vcpu,enum kvm_reg reg);unsigned long (*get_rflags)(struct kvm_vcpu *vcpu);
arch/x86/kvm/svm/svm.c +6 -4
@@ -4308,10 +4308,13 @@ static __no_kcsan fastpath_t svm_vcpu_run(struct kvm_vcpu *vcpu, u64 run_flags)svm_hv_update_vp_id (svm->vmcb, vcpu);/* -* Run with all-zero DR6 unless needed, so that we can get the exact cause -* of a #DB. +* Run with all-zero DR6 unless the guest can write DR6 freely, so that +* KVM can get the exact cause of a #DB. Note, loading guest DR6 from +* KVM's snapshot is only necessary when DR accesses won't exit. */ -if (likely (!(vcpu->arch.switch_db_regs &KVM_DEBUGREG_WONT_EXIT ))) +if (unlikely (run_flags &KVM_RUN_LOAD_GUEST_DR6 )) +svm_set_dr6 (vcpu, vcpu->arch.dr6); +else if (likely (!(vcpu->arch.switch_db_regs &KVM_DEBUGREG_WONT_EXIT )))svm_set_dr6 (vcpu,DR6_ACTIVE_LOW );clgi ();
@@ -5119,7 +5122,6 @@ static struct kvm_x86_ops svm_x86_ops __initdata = { .set_idt = svm_set_idt, .get_gdt = svm_get_gdt, .set_gdt = svm_set_gdt, - .set_dr6 = svm_set_dr6, .set_dr7 = svm_set_dr7, .sync_dirty_debug_regs = svm_sync_dirty_debug_regs, .cache_reg = svm_cache_reg,
arch/x86/kvm/vmx/main.c +0 -9
@@ -498,14 +498,6 @@ static void vt_set_gdt(struct kvm_vcpu *vcpu, struct desc_ptr *dt)vmx_set_gdt (vcpu, dt); } -static void vt_set_dr6 (struct kvm_vcpu *vcpu,unsigned long val) -{ -if (is_td_vcpu (vcpu)) -return ; - -vmx_set_dr6 (vcpu, val); -} -static void vt_set_dr7 (struct kvm_vcpu *vcpu,unsigned long val) {if (is_td_vcpu (vcpu))
@@ -945,7 +937,6 @@ struct kvm_x86_ops vt_x86_ops __initdata = { .set_idt = vt_set_idt, .get_gdt = vt_get_gdt, .set_gdt = vt_set_gdt, - .set_dr6 = vt_set_dr6, .set_dr7 = vt_set_dr7, .sync_dirty_debug_regs = vt_sync_dirty_debug_regs, .cache_reg = vt_cache_reg,
arch/x86/kvm/vmx/vmx.c +3 -6
@@ -5611,12 +5611,6 @@ void vmx_sync_dirty_debug_regs(struct kvm_vcpu *vcpu)set_debugreg (DR6_RESERVED ,6 ); } -void vmx_set_dr6 (struct kvm_vcpu *vcpu,unsigned long val) -{ -lockdep_assert_irqs_disabled (); -set_debugreg (vcpu->arch.dr6,6 ); -} -void vmx_set_dr7 (struct kvm_vcpu *vcpu,unsigned long val) {vmcs_writel (GUEST_DR7 , val);
@@ -7371,6 +7365,9 @@ fastpath_t vmx_vcpu_run(struct kvm_vcpu *vcpu, u64 run_flags)vmcs_writel (GUEST_RIP , vcpu->arch.regs[VCPU_REGS_RIP ]); vcpu->arch.regs_dirty =0 ; +if (run_flags &KVM_RUN_LOAD_GUEST_DR6 ) +set_debugreg (vcpu->arch.dr6,6 ); +/* * Refresh vmcs.HOST_CR3 if necessary. This must be done immediately * prior to VM-Enter, as the kernel may load a new ASID (PCID) any time
arch/x86/kvm/x86.c +1 -1
@@ -11019,7 +11019,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)set_debugreg (vcpu->arch.eff_db[3 ],3 );/* When KVM_DEBUGREG_WONT_EXIT, dr6 is accessible in guest. */ if (unlikely (vcpu->arch.switch_db_regs &KVM_DEBUGREG_WONT_EXIT )) -kvm_x86_call (set_dr6)(vcpu, vcpu->arch.dr6); + run_flags |=KVM_RUN_LOAD_GUEST_DR6 ; }else if (unlikely (hw_breakpoint_active ())) {set_debugreg (0 ,7 ); }
Signature · 1 line
2.46.0
Sean Christopherson
maintainerRe: [PATCH v5 2/5] KVM: x86: Drop kvm_x86_ops.set_dr6() in favor of a new KVM_RUN flag
Quoted 8 lines · Maxim Levitsky
From: Sean Christopherson <[email protected]>
Instruct vendor code to load the guest's DR6 into hardware via a new
KVM_RUNflag, and removekvm_x86_ops.set_dr6(), whose sole purpose was to loadvcpu->arch.dr6into hardware when DR6 can be read/written directly by the guest.Signed-off-by Sean Christopherson <[email protected]>
Quoted 8 lines
--- arch/x86/include/asm/kvm-x86-ops.h | 1 - arch/x86/include/asm/kvm_host.h | 2 +- arch/x86/kvm/svm/svm.c | 10 ++++++---- arch/x86/kvm/vmx/main.c | 9 --------- arch/x86/kvm/vmx/vmx.c | 9 +++------ arch/x86/kvm/x86.c | 2 +- 6 files changed, 11 insertions(+), 22 deletions(-)
As alluded to in the previous patch, TDX should WARN, because guest DR6 is owned by the TDX module (the KVM_DEBUGREG_AUTO_SWITCH guard prevents KVM_RUN_LOAD_GUEST_DR6 from being set).
PATCH v5 3/5 KVM: nVMX: check vmcs12->guest_ia32_debugctl value given by L2
In reply to Maxim LevitskyCheck the vmcs12 guest_ia32_debugctl value before loading it, to avoid L2 being able to load arbitrary values to hardware IA32_DEBUGCTL.
--- arch/x86/kvm/vmx/nested.c | 3 ++- arch/x86/kvm/vmx/vmx.c | 2 +- arch/x86/kvm/vmx/vmx.h | 1 + 3 files changed, 4 insertions(+), 2 deletions(-)
arch/x86/kvm/vmx/nested.c +2 -1
@@ -3146,7 +3146,8 @@ static int nested_vmx_check_guest_state(struct kvm_vcpu *vcpu,return -EINVAL ;if ((vmcs12->vm_entry_controls &VM_ENTRY_LOAD_DEBUG_CONTROLS ) && -CC (!kvm_dr7_valid (vmcs12->guest_dr7))) + (CC (!kvm_dr7_valid (vmcs12->guest_dr7)) || +CC (vmcs12->guest_ia32_debugctl & ~vmx_get_supported_debugctl (vcpu, false))))return -EINVAL ; if ((vmcs12->vm_entry_controls & VM_ENTRY_LOAD_IA32_PAT) &&
arch/x86/kvm/vmx/vmx.c +1 -1
@@ -2179,7 +2179,7 @@ static u64 nested_vmx_truncate_sysenter_addr(struct kvm_vcpu *vcpu,return (unsigned long )data; } -static u64 vmx_get_supported_debugctl (struct kvm_vcpu *vcpu,bool host_initiated) +u64 vmx_get_supported_debugctl (struct kvm_vcpu *vcpu,bool host_initiated) {u64 debugctl =0 ;
arch/x86/kvm/vmx/vmx.h +1 -0
@@ -414,6 +414,7 @@ static inline void vmx_set_intercept_for_msr(struct kvm_vcpu *vcpu, u32 msr, }void vmx_update_cpu_dirty_logging (struct kvm_vcpu *vcpu); +u64 vmx_get_supported_debugctl (struct kvm_vcpu *vcpu,bool host_initiated);/* * Note, early Intel manuals have the write-low and read-high bitmap offsets
Signature · 1 line
2.46.0
Sean Christopherson
maintainerRe: [PATCH v5 3/5] KVM: nVMX: check vmcs12->guest_ia32_debugctl value given by L2
Quoted 16 lines · Maxim Levitsky
Check the vmcs12
guest_ia32_debugctlvalue before loading it, to avoid L2 being able to load arbitrary values to hardwareIA32_DEBUGCTL.Reviewed-by Chao Gao <[email protected]>Signed-off-by Maxim Levitsky <[email protected]>--- arch/x86/kvm/vmx/nested.c | 3 ++- arch/x86/kvm/vmx/vmx.c | 2 +- arch/x86/kvm/vmx/vmx.h | 1 + 3 files changed, 4 insertions(+), 2 deletions(-)arch/x86/kvm/vmx/nested.c +0
-0
arch/x86/kvm/vmx/nested.c static int nested_vmx_check_guest_state(struct kvm_vcpu *vcpu, · line 3150
Quoted 6 lines
arch/x86/kvm/vmx/nested.c +2
-1@@ -3146,7 +3146,8 @@ static int nested_vmx_check_guest_state(struct kvm_vcpu *vcpu,return -EINVAL ;if ((vmcs12->vm_entry_controls &VM_ENTRY_LOAD_DEBUG_CONTROLS ) && -CC (!kvm_dr7_valid (vmcs12->guest_dr7))) + (CC (!kvm_dr7_valid (vmcs12->guest_dr7)) || +CC (vmcs12->guest_ia32_debugctl & ~vmx_get_supported_debugctl (vcpu, false))))
This is a breaking change. For better or worse (read: worse), KVM's ABI is to drop BTF and LBR if they're unsupported (the former is always unsupported). Failure to honor that ABI means L1 can't excplitly load what it think is its current value into L2.
I'll slot in a path to provide another helper for checking the validity of DEBUGCTL. I think I've managed to cobble together something that isn't too horrific (options are a bit limited due to the existing ugliness).
Sean Christopherson
maintainerRe: [PATCH v5 3/5] KVM: nVMX: check vmcs12->guest_ia32_debugctl value given by L2
+Jim
Quoted 29 lines · Sean Christopherson
Quoted 16 lines · Maxim Levitsky
Check the vmcs12
guest_ia32_debugctlvalue before loading it, to avoid L2 being able to load arbitrary values to hardwareIA32_DEBUGCTL.Reviewed-by Chao Gao <[email protected]>Signed-off-by Maxim Levitsky <[email protected]>--- arch/x86/kvm/vmx/nested.c | 3 ++- arch/x86/kvm/vmx/vmx.c | 2 +- arch/x86/kvm/vmx/vmx.h | 1 + 3 files changed, 4 insertions(+), 2 deletions(-)arch/x86/kvm/vmx/nested.c +0
-0arch/x86/kvm/vmx/nested.c static int nested_vmx_check_guest_state(struct kvm_vcpu *vcpu, · line 3150
Quoted 6 lines
arch/x86/kvm/vmx/nested.c +2
-1@@ -3146,7 +3146,8 @@ static int nested_vmx_check_guest_state(struct kvm_vcpu *vcpu,return -EINVAL ;if ((vmcs12->vm_entry_controls &VM_ENTRY_LOAD_DEBUG_CONTROLS ) && -CC (!kvm_dr7_valid (vmcs12->guest_dr7))) + (CC (!kvm_dr7_valid (vmcs12->guest_dr7)) || +CC (vmcs12->guest_ia32_debugctl & ~vmx_get_supported_debugctl (vcpu, false))))This is a breaking change. For better or worse (read: worse), KVM's ABI is to drop BTF and LBR if they're unsupported (the former is always unsupported). Failure to honor that ABI means L1 can't excplitly load what it think is its current value into L2.
Quoted 3 lines
I'll slot in a path to provide another helper for checking the validity of DEBUGCTL. I think I've managed to cobble together something that isn't too horrific (options are a bit limited due to the existing ugliness).
And then Jim ruined my day. :-)
As evidenced by this hilarious KUT testcase, it's entirely possible there are existing KVM guests that are utilizing/abusing DEBUGCTL features.
/*
* Optional RTM test for hardware that supports RTM, to
* demonstrate that the current volume 3 of the SDM
* (325384-067US), table 27-1 is incorrect. Bit 16 of the exit
* qualification for debug exceptions is not reserved. It is
* set to 1 if a debug exception (#DB) or a breakpoint
* exception (#BP) occurs inside an RTM region while advanced
* debugging of RTM transactional regions is enabled.
*/
if (this_cpu_has(X86_FEATURE_RTM)) {
vmcs_write(ENT_CONTROLS,
vmcs_read(ENT_CONTROLS) | ENT_LOAD_DBGCTLS);
/*
* Set DR7.RTM[bit 11] and IA32_DEBUGCTL.RTM[bit 15]
* in the guest to enable advanced debugging of RTM
* transactional regions.
*/
vmcs_write(GUEST_DR7, BIT(11));
vmcs_write(GUEST_DEBUGCTL, BIT(15));
single_step_guest("Hardware delivered single-step in "
"transactional region", starting_dr6, 0);
check_db_exit(false, false, false, &xbegin, BIT(16),
starting_dr6);
} else {
vmcs_write(GUEST_RIP, (u64)&skip_rtm);
enter_guest();
}For RTM specifically, disallowing DEBUGCTL.RTM but allowing DR7.RTM seems a bit silly. Unless there's a security concern, that can probably be fixed by adding support for RTM. Note, there's also a virtualization hole here, as KVM doesn't vet DR7 beyond checking that bits 63:32 are zero, i.e. a guest could set DR7.RTM even if KVM doesn't advertise support. Of course, closing that hole would require completely dropping support for disabling DR interception, since VMX doesn't give per-DR controls.
For the other bits, I don't see a good solution. The only viable options I see are to silently drop all unsupported bits (maybe with a quirk?), or enforce all bits and cross our fingers that no L1 VMM is running guests with those bits set in GUEST_DEBUGCTL.
Sean Christopherson
maintainerRe: [PATCH v5 3/5] KVM: nVMX: check vmcs12->guest_ia32_debugctl value given by L2
Quoted 77 lines · Sean Christopherson
+Jim
Quoted 29 lines · Sean Christopherson
Quoted 16 lines · Maxim Levitsky
Check the vmcs12
guest_ia32_debugctlvalue before loading it, to avoid L2 being able to load arbitrary values to hardwareIA32_DEBUGCTL.Reviewed-by Chao Gao <[email protected]>Signed-off-by Maxim Levitsky <[email protected]>--- arch/x86/kvm/vmx/nested.c | 3 ++- arch/x86/kvm/vmx/vmx.c | 2 +- arch/x86/kvm/vmx/vmx.h | 1 + 3 files changed, 4 insertions(+), 2 deletions(-)arch/x86/kvm/vmx/nested.c +0
-0arch/x86/kvm/vmx/nested.c static int nested_vmx_check_guest_state(struct kvm_vcpu *vcpu, · line 3150
Quoted 6 lines
arch/x86/kvm/vmx/nested.c +2
-1@@ -3146,7 +3146,8 @@ static int nested_vmx_check_guest_state(struct kvm_vcpu *vcpu,return -EINVAL ;if ((vmcs12->vm_entry_controls &VM_ENTRY_LOAD_DEBUG_CONTROLS ) && -CC (!kvm_dr7_valid (vmcs12->guest_dr7))) + (CC (!kvm_dr7_valid (vmcs12->guest_dr7)) || +CC (vmcs12->guest_ia32_debugctl & ~vmx_get_supported_debugctl (vcpu, false))))This is a breaking change. For better or worse (read: worse), KVM's ABI is to drop BTF and LBR if they're unsupported (the former is always unsupported). Failure to honor that ABI means L1 can't excplitly load what it think is its current value into L2.
Quoted 3 lines
I'll slot in a path to provide another helper for checking the validity of DEBUGCTL. I think I've managed to cobble together something that isn't too horrific (options are a bit limited due to the existing ugliness).
And then Jim ruined my day. :-)
As evidenced by this hilarious KUT testcase, it's entirely possible there are existing KVM guests that are utilizing/abusing DEBUGCTL features.
/* * Optional RTM test for hardware that supports RTM, to * demonstrate that the current volume 3 of the SDM * (325384-067US), table 27-1 is incorrect. Bit 16 of the exit * qualification for debug exceptions is not reserved. It is * set to 1 if a debug exception (#DB) or a breakpoint * exception (#BP) occurs inside an RTM region while advanced * debugging of RTM transactional regions is enabled. */ if (this_cpu_has(X86_FEATURE_RTM)) { vmcs_write(ENT_CONTROLS, vmcs_read(ENT_CONTROLS) | ENT_LOAD_DBGCTLS); /* * Set DR7.RTM[bit 11] and IA32_DEBUGCTL.RTM[bit 15] * in the guest to enable advanced debugging of RTM * transactional regions. */ vmcs_write(GUEST_DR7, BIT(11)); vmcs_write(GUEST_DEBUGCTL, BIT(15)); single_step_guest("Hardware delivered single-step in " "transactional region", starting_dr6, 0); check_db_exit(false, false, false, &xbegin, BIT(16), starting_dr6); } else { vmcs_write(GUEST_RIP, (u64)&skip_rtm); enter_guest(); }For RTM specifically, disallowing DEBUGCTL.RTM but allowing DR7.RTM seems a bit silly. Unless there's a security concern, that can probably be fixed by adding support for RTM. Note, there's also a virtualization hole here, as KVM doesn't vet DR7 beyond checking that bits 63:32 are zero, i.e. a guest could set DR7.RTM even if KVM doesn't advertise support. Of course, closing that hole would require completely dropping support for disabling DR interception, since VMX doesn't give per-DR controls.
Quoted 4 lines
For the other bits, I don't see a good solution. The only viable options I see are to silently drop all unsupported bits (maybe with a quirk?), or enforce all bits and cross our fingers that no L1 VMM is running guests with those bits set in
GUEST_DEBUGCTL.
Paolo and I discussed this in PUCK this morning.
We agree trying to close the DR7 virtualization hole would be futile, and that we should add support for DEBUGCTL.RTM to avoid breaking use of that specific bit.
For the other DEBUGCTL bits, none of them actually work (although, somewhat amusingly, FREEZE_WHILE_SMM would "work" for real SMIs, which aren't visible to L1), so we're going to roll the dice, cross our fingers that no existing workload is setting those bits only in vmcs12.GUEST_DEBUGCTL, and enforce vmx_get_supported_debugctl() at VM-Enter without any quirk.
6 TR: Setting this bit to 1 enables branch trace messages to be sent. 7 BTS: Setting this bit enables branch trace messages (BTMs) to be logged in a BTS buffer. 8 BTINT: When clear, BTMs are logged in a BTS buffer in circular fashion. 9 BTS_OFF_OS: When set, BTS or BTM is skipped if CPL = 0. 10 BTS_OFF_USR: When set, BTS or BTM is skipped if CPL > 0. 11 FREEZE_LBRS_ON_PMI: When set, the LBR stack is frozen on a PMI request. 12 FREEZE_PERFMON_ON_PMI: When set, each ENABLE bit of the global counter control MSR are frozen on a PMI request. 13 ENABLE_UNCORE_PMI: When set, enables the logical processor to receive and generate PMI on behalf of the uncore. 14 FREEZE_WHILE_SMM: When set, freezes perfmon and trace messages while in SMM.
Re: [PATCH v5 3/5] KVM: nVMX: check vmcs12->guest_ia32_debugctl value given by L2
Quoted 95 lines · Sean Christopherson
Quoted 77 lines · Sean Christopherson
+Jim
Quoted 29 lines · Sean Christopherson
Quoted 16 lines · Maxim Levitsky
Check the vmcs12
guest_ia32_debugctlvalue before loading it, to avoid L2 being able to load arbitrary values to hardwareIA32_DEBUGCTL.Reviewed-by Chao Gao <[email protected]>Signed-off-by Maxim Levitsky <[email protected]>--- arch/x86/kvm/vmx/nested.c | 3 ++- arch/x86/kvm/vmx/vmx.c | 2 +- arch/x86/kvm/vmx/vmx.h | 1 + 3 files changed, 4 insertions(+), 2 deletions(-)arch/x86/kvm/vmx/nested.c +0
-0arch/x86/kvm/vmx/nested.c static int nested_vmx_check_guest_state(struct kvm_vcpu *vcpu, · line 3150
Quoted 6 lines
arch/x86/kvm/vmx/nested.c +2
-1@@ -3146,7 +3146,8 @@ static int nested_vmx_check_guest_state(struct kvm_vcpu *vcpu,return -EINVAL ;if ((vmcs12->vm_entry_controls &VM_ENTRY_LOAD_DEBUG_CONTROLS ) && -CC (!kvm_dr7_valid (vmcs12->guest_dr7))) + (CC (!kvm_dr7_valid (vmcs12->guest_dr7)) || +CC (vmcs12->guest_ia32_debugctl & ~vmx_get_supported_debugctl (vcpu, false))))This is a breaking change. For better or worse (read: worse), KVM's ABI is to drop BTF and LBR if they're unsupported (the former is always unsupported). Failure to honor that ABI means L1 can't excplitly load what it think is its current value into L2.
Quoted 3 lines
I'll slot in a path to provide another helper for checking the validity of DEBUGCTL. I think I've managed to cobble together something that isn't too horrific (options are a bit limited due to the existing ugliness).
And then Jim ruined my day. :-)
As evidenced by this hilarious KUT testcase, it's entirely possible there are existing KVM guests that are utilizing/abusing DEBUGCTL features.
/* * Optional RTM test for hardware that supports RTM, to * demonstrate that the current volume 3 of the SDM * (325384-067US), table 27-1 is incorrect. Bit 16 of the exit * qualification for debug exceptions is not reserved. It is * set to 1 if a debug exception (#DB) or a breakpoint * exception (#BP) occurs inside an RTM region while advanced * debugging of RTM transactional regions is enabled. */ if (this_cpu_has(X86_FEATURE_RTM)) { vmcs_write(ENT_CONTROLS, vmcs_read(ENT_CONTROLS) | ENT_LOAD_DBGCTLS); /* * Set DR7.RTM[bit 11] and IA32_DEBUGCTL.RTM[bit 15] * in the guest to enable advanced debugging of RTM * transactional regions. */ vmcs_write(GUEST_DR7, BIT(11)); vmcs_write(GUEST_DEBUGCTL, BIT(15)); single_step_guest("Hardware delivered single-step in " "transactional region", starting_dr6, 0); check_db_exit(false, false, false, &xbegin, BIT(16), starting_dr6); } else { vmcs_write(GUEST_RIP, (u64)&skip_rtm); enter_guest(); }For RTM specifically, disallowing DEBUGCTL.RTM but allowing DR7.RTM seems a bit silly. Unless there's a security concern, that can probably be fixed by adding support for RTM. Note, there's also a virtualization hole here, as KVM doesn't vet DR7 beyond checking that bits 63:32 are zero, i.e. a guest could set DR7.RTM even if KVM doesn't advertise support. Of course, closing that hole would require completely dropping support for disabling DR interception, since VMX doesn't give per-DR controls.
Quoted 4 lines
For the other bits, I don't see a good solution. The only viable options I see are to silently drop all unsupported bits (maybe with a quirk?), or enforce all bits and cross our fingers that no L1 VMM is running guests with those bits set in
GUEST_DEBUGCTL.Paolo and I discussed this in PUCK this morning.
We agree trying to close the DR7 virtualization hole would be futile, and that we should add support for DEBUGCTL.RTM to avoid breaking use of that specific bit.
For the other DEBUGCTL bits, none of them actually work (although, somewhat amusingly,
FREEZE_WHILE_SMMwould "work" for real SMIs, which aren't visible to L1), so we're going to roll the dice, cross our fingers that no existing workload is setting those bits only in vmcs12.GUEST_DEBUGCTL, and enforcevmx_get_supported_debugctl()at VM-Enter without any quirk.
Quoted 9 lines
6 TR: Setting this bit to 1 enables branch trace messages to be sent. 7 BTS: Setting this bit enables branch trace messages (BTMs) to be logged in a BTS buffer. 8 BTINT: When clear, BTMs are logged in a BTS buffer in circular fashion. 9 BTS_OFF_OS: When set, BTS or BTM is skipped if CPL = 0. 10 BTS_OFF_USR: When set, BTS or BTM is skipped if CPL > 0. 11 FREEZE_LBRS_ON_PMI: When set, the LBR stack is frozen on a PMI request. 12 FREEZE_PERFMON_ON_PMI: When set, each ENABLE bit of the global counter control MSR are frozen on a PMI request. 13 ENABLE_UNCORE_PMI: When set, enables the logical processor to receive and generate PMI on behalf of the uncore. 14 FREEZE_WHILE_SMM: When set, freezes perfmon and trace messages while in SMM.
I have encountered an existing workload that sets FREEZE_WHILE_SMM, and this change wantonly breaks it.
KVM should continue to allow legacy workloads to (perhaps ineffectively) set FREEZE_WHILE_SMM under a quirk .
PATCH v5 4/5 KVM: VMX: wrap guest access to IA32_DEBUGCTL with wrappers
In reply to Maxim LevitskyIntroduce two wrappers vmx_guest_debugctl_read and vmx_guest_debugctl_write which read/write the GUEST_IA32_DEBUGCTL vmcs field.
In the next patch these wrappers will be used to hide the DEBUGCTLMSR_FREEZE_IN_SMM bit from the guest.
--- arch/x86/kvm/vmx/nested.c | 4 ++-- arch/x86/kvm/vmx/pmu_intel.c | 8 ++++---- arch/x86/kvm/vmx/vmx.c | 18 +++++++++++++++--- arch/x86/kvm/vmx/vmx.h | 2 ++ 4 files changed, 23 insertions(+), 9 deletions(-)
arch/x86/kvm/vmx/nested.c +2 -2
@@ -2653,7 +2653,7 @@ static int prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12,if (vmx->nested.nested_run_pending && (vmcs12->vm_entry_controls &VM_ENTRY_LOAD_DEBUG_CONTROLS )) {kvm_set_dr (vcpu,7 , vmcs12->guest_dr7); -vmcs_write64 (GUEST_IA32_DEBUGCTL , vmcs12->guest_ia32_debugctl); +vmx_guest_debugctl_write (vcpu, vmcs12->guest_ia32_debugctl); }else {kvm_set_dr (vcpu,7 , vcpu->arch.dr7);vmcs_write64 (GUEST_IA32_DEBUGCTL , vmx->nested.pre_vmenter_debugctl);
@@ -4789,7 +4789,7 @@ static void load_vmcs12_host_state(struct kvm_vcpu *vcpu,__vmx_set_segment (vcpu, &seg,VCPU_SREG_LDTR );kvm_set_dr (vcpu,7 ,0x400 ); -vmcs_write64 (GUEST_IA32_DEBUGCTL ,0 ); +vmx_guest_debugctl_write (vcpu,0 );if (nested_vmx_load_msr (vcpu, vmcs12->vm_exit_msr_load_addr, vmcs12->vm_exit_msr_load_count))
arch/x86/kvm/vmx/pmu_intel.c +4 -4
@@ -652,11 +652,11 @@ static void intel_pmu_reset(struct kvm_vcpu *vcpu)*/ static void intel_pmu_legacy_freezing_lbrs_on_pmi (struct kvm_vcpu *vcpu) { -u64 data =vmcs_read64 (GUEST_IA32_DEBUGCTL ); +u64 data =vmx_guest_debugctl_read ();if (data &DEBUGCTLMSR_FREEZE_LBRS_ON_PMI ) { data &= ~DEBUGCTLMSR_LBR ; -vmcs_write64 (GUEST_IA32_DEBUGCTL , data); +vmx_guest_debugctl_write (vcpu, data); } }
@@ -729,7 +729,7 @@ void vmx_passthrough_lbr_msrs(struct kvm_vcpu *vcpu)if (!lbr_desc->event) {vmx_disable_lbr_msrs_passthrough (vcpu); -if (vmcs_read64 (GUEST_IA32_DEBUGCTL ) &DEBUGCTLMSR_LBR ) +if (vmx_guest_debugctl_read () &DEBUGCTLMSR_LBR ) goto warn;if (test_bit (INTEL_PMC_IDX_FIXED_VLBR , pmu->pmc_in_use)) goto warn;
@@ -751,7 +751,7 @@ void vmx_passthrough_lbr_msrs(struct kvm_vcpu *vcpu)static void intel_pmu_cleanup (struct kvm_vcpu *vcpu) { -if (!(vmcs_read64 (GUEST_IA32_DEBUGCTL ) &DEBUGCTLMSR_LBR )) +if (!(vmx_guest_debugctl_read () &DEBUGCTLMSR_LBR ))intel_pmu_release_guest_lbr_event (vcpu); }
arch/x86/kvm/vmx/vmx.c +15 -3
@@ -2154,7 +2154,7 @@ int vmx_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info) msr_info->data = vmx->pt_desc.guest.addr_a[index /2 ];break ;case MSR_IA32_DEBUGCTLMSR : - msr_info->data =vmcs_read64 (GUEST_IA32_DEBUGCTL ); + msr_info->data =vmx_guest_debugctl_read ();break ;default : find_uret_msr:
@@ -2194,6 +2194,16 @@ u64 vmx_get_supported_debugctl(struct kvm_vcpu *vcpu, bool host_initiated)return debugctl; } +void vmx_guest_debugctl_write (struct kvm_vcpu *vcpu,u64 val) +{ +vmcs_write64 (GUEST_IA32_DEBUGCTL , val); +} + +u64 vmx_guest_debugctl_read (void ) +{ +return vmcs_read64 (GUEST_IA32_DEBUGCTL ); +} +/* * Writes msr value into the appropriate "register". * Returns 0 on success, non-0 otherwise.
@@ -2279,7 +2289,8 @@ int vmx_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info) VM_EXIT_SAVE_DEBUG_CONTROLS) get_vmcs12(vcpu)->guest_ia32_debugctl = data; - vmcs_write64(GUEST_IA32_DEBUGCTL, data); + vmx_guest_debugctl_write(vcpu, data); + if (intel_pmu_lbr_is_enabled(vcpu) && !to_vmx(vcpu)->lbr_desc.event && (data & DEBUGCTLMSR_LBR)) intel_pmu_create_guest_lbr_event(vcpu);
@@ -4795,7 +4806,8 @@ static void init_vmcs(struct vcpu_vmx *vmx)vmcs_write32 (GUEST_SYSENTER_CS ,0 );vmcs_writel (GUEST_SYSENTER_ESP ,0 );vmcs_writel (GUEST_SYSENTER_EIP ,0 ); -vmcs_write64 (GUEST_IA32_DEBUGCTL ,0 ); + +vmx_guest_debugctl_write (&vmx->vcpu,0 );if (cpu_has_vmx_tpr_shadow ()) {vmcs_write64 (VIRTUAL_APIC_PAGE_ADDR ,0 );
arch/x86/kvm/vmx/vmx.h +2 -0
@@ -415,6 +415,8 @@ static inline void vmx_set_intercept_for_msr(struct kvm_vcpu *vcpu, u32 msr,void vmx_update_cpu_dirty_logging (struct kvm_vcpu *vcpu);u64 vmx_get_supported_debugctl (struct kvm_vcpu *vcpu,bool host_initiated); +void vmx_guest_debugctl_write (struct kvm_vcpu *vcpu,u64 val); +u64 vmx_guest_debugctl_read (void );/* * Note, early Intel manuals have the write-low and read-high bitmap offsets
Signature · 1 line
2.46.0
Sean Christopherson
maintainerRe: [PATCH v5 4/5] KVM: VMX: wrap guest access to IA32_DEBUGCTL with wrappers
This doesn't just wrap guest access, it wraps all access.
arch/x86/kvm/vmx/nested.c static int prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12, · line 2659
Quoted 13 lines · Maxim Levitsky
arch/x86/kvm/vmx/nested.c +1
-1@@ -2653,7 +2653,7 @@ static int prepare_vmcs02(struct kvm_vcpu *vcpu, struct vmcs12 *vmcs12,if (vmx->nested.nested_run_pending && (vmcs12->vm_entry_controls &VM_ENTRY_LOAD_DEBUG_CONTROLS )) {kvm_set_dr (vcpu,7 , vmcs12->guest_dr7); -vmcs_write64 (GUEST_IA32_DEBUGCTL , vmcs12->guest_ia32_debugctl); +vmx_guest_debugctl_write (vcpu, vmcs12->guest_ia32_debugctl); }else {kvm_set_dr (vcpu,7 , vcpu->arch.dr7);vmcs_write64 (GUEST_IA32_DEBUGCTL , vmx->nested.pre_vmenter_debugctl);
I think it makes sense to use the accessors for this case as well. Conceptually, pre_vmenter_debugctl holds the guest value. The fact that it holds the combined value _as written_ is rather subtle, and could change for the worse, e.g. it'd be quite unfortunate/hilarious if someone converted the read path to use the getter, and in doing so introduced a bug.
PATCH v5 5/5 KVM: VMX: preserve DEBUGCTLMSR_FREEZE_IN_SMM
In reply to Maxim LevitskyPass through the host's DEBUGCTL.DEBUGCTLMSR_FREEZE_IN_SMM to the guest GUEST_IA32_DEBUGCTL without the guest seeing this value.
Since the value of the host DEBUGCTL can in theory change between VM runs, check if has changed, and if yes, then reload the GUEST_IA32_DEBUGCTL with the new value.
--- arch/x86/include/asm/kvm_host.h | 1 + arch/x86/kvm/vmx/vmx.c | 6 +++++- arch/x86/kvm/x86.c | 7 +++++-- 3 files changed, 11 insertions(+), 3 deletions(-)
arch/x86/include/asm/kvm_host.h +1 -0
@@ -1674,6 +1674,7 @@ static inline u16 kvm_lapic_irq_dest_mode(bool dest_mode_logical)enum kvm_x86_run_flags {KVM_RUN_FORCE_IMMEDIATE_EXIT =BIT (0 ),KVM_RUN_LOAD_GUEST_DR6 =BIT (1 ), +KVM_RUN_LOAD_DEBUGCTL =BIT (2 ), };struct kvm_x86_ops {
arch/x86/kvm/vmx/vmx.c +5 -1
@@ -2196,12 +2196,13 @@ u64 vmx_get_supported_debugctl(struct kvm_vcpu *vcpu, bool host_initiated)void vmx_guest_debugctl_write (struct kvm_vcpu *vcpu,u64 val) { + val |= vcpu->arch.host_debugctl &DEBUGCTLMSR_FREEZE_IN_SMM ;vmcs_write64 (GUEST_IA32_DEBUGCTL , val); }u64 vmx_guest_debugctl_read (void ) { -return vmcs_read64 (GUEST_IA32_DEBUGCTL ); +return vmcs_read64 (GUEST_IA32_DEBUGCTL ) & ~DEBUGCTLMSR_FREEZE_IN_SMM ; }/*
@@ -7380,6 +7381,9 @@ fastpath_t vmx_vcpu_run(struct kvm_vcpu *vcpu, u64 run_flags)if (run_flags &KVM_RUN_LOAD_GUEST_DR6 )set_debugreg (vcpu->arch.dr6,6 ); +if (run_flags &KVM_RUN_LOAD_DEBUGCTL ) +vmx_guest_debugctl_write (vcpu,vmx_guest_debugctl_read ()); +/* * Refresh vmcs.HOST_CR3 if necessary. This must be done immediately * prior to VM-Enter, as the kernel may load a new ASID (PCID) any time
arch/x86/kvm/x86.c +5 -2
@@ -10752,7 +10752,7 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)dm_request_for_irq_injection (vcpu) &&kvm_cpu_accept_dm_intr (vcpu);fastpath_t exit_fastpath; -u64 run_flags; +u64 run_flags, debug_ctl;bool req_immediate_exit = false;
@@ -11024,7 +11024,10 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)set_debugreg (0 ,7 ); } - vcpu->arch.host_debugctl =get_debugctlmsr (); + debug_ctl =get_debugctlmsr (); +if (!vcpu->arch.guest_state_protected && (debug_ctl != vcpu->arch.host_debugctl)) + run_flags |=KVM_RUN_LOAD_DEBUGCTL ; + vcpu->arch.host_debugctl = debug_ctl;guest_timing_enter_irqoff ();
Signature · 1 line
2.46.0
Sean Christopherson
maintainerRe: [PATCH v5 5/5] KVM: VMX: preserve DEBUGCTLMSR_FREEZE_IN_SMM
Quoted 7 lines · Maxim Levitsky
Pass through the host's DEBUGCTL.DEBUGCTLMSR_FREEZE_IN_SMM to the guest
GUEST_IA32_DEBUGCTLwithout the guest seeing this value.Since the value of the host DEBUGCTL can in theory change between VM runs, check if has changed, and if yes, then reload the
GUEST_IA32_DEBUGCTLwith the new value.
Quoted 6 lines
Signed-off-by Maxim Levitsky <[email protected]>--- arch/x86/include/asm/kvm_host.h | 1 + arch/x86/kvm/vmx/vmx.c | 6 +++++- arch/x86/kvm/x86.c | 7 +++++-- 3 files changed, 11 insertions(+), 3 deletions(-)
SVM and TDX definitely should WARN (though TDX can simply reuse the WARN on a non-zero run_fags), if only to document that KVM isn't buggy.
arch/x86/kvm/vmx/vmx.c fastpath_t vmx_vcpu_run(struct kvm_vcpu *vcpu, u64 run_flags) · line 7385
Quoted 6 lines
arch/x86/kvm/vmx/vmx.c +2
-0@@ -7380,6 +7381,9 @@ fastpath_t vmx_vcpu_run(struct kvm_vcpu *vcpu, u64 run_flags)if (run_flags &KVM_RUN_LOAD_GUEST_DR6 )set_debugreg (vcpu->arch.dr6,6 ); +if (run_flags &KVM_RUN_LOAD_DEBUGCTL ) +vmx_guest_debugctl_write (vcpu,vmx_guest_debugctl_read ());
There's a rather amusing and subtle nested VMX bug. On a VM-Fail that is missed by KVM, KVM will have done vcpu_enter_guest() => vmx_vcpu_run() with vmcs02, i.e. will have updated the host_debugctl snapshot, but won't explicitly write vmcs01 because nested_vmx_restore_host_state() doesn't emulate a VM-Exit (it mostly restores state that KVM shoved into its software model).
I mention that here, because I was already wondering if it made sense to add a helper to perform the VMWRITE if and only if necessary. I was leaning "no", because for this path, it should always be necessary. But with the nested VM-Fail path in play, it will often be unnecessary.
Sean Christopherson
maintainerQuoted 1 line · Maxim Levitsky
V5: addressed the review feedback. Thanks.
I'll send v6 later today. I want to include the TDX fix[*] in this series, and hopefully we can save some back-and-forth on the series (I want to get this into 6.16-rc1). My plan is to shove this into a dedicated topic branch by end of week, and then send a separate pull request for the branch sometime next week.
Sean Christopherson
maintainerQuoted 4 lines · Sean Christopherson
Quoted 1 line · Maxim Levitsky
V5: addressed the review feedback. Thanks.
I'll send v6 later today.
This ain't happening. See the conversation I'm having with myself in patch 3. I do have a refreshed and tested (ignoring the nested mess) series prepped, i.e. no need for you to work on a v6, I just won't get it posted today.