Skip to contentSkip to conversation

arm/dts/qemu-sbsa: Fix interrupt

PATCH In review Patrick Rudolph 2 participants 2 messages May 27, 2025 – Jun 2, 2025 Arm (32-bit)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm/dts/qemu-sbsa: Fix interrupt

Change the vcpumntirq in the GICv3 node from SPI to PPI.

Prevents Linux from complaining:
'[Firmware Bug]: CPU interface incapable of MMIO access'

Fixes 6d722894fd48 "board: emulation: Add QEMU sbsa support"
---
 arch/arm/dts/qemu-sbsa.dts | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
arch/arm/dts/qemu-sbsa.dts +4 -1
index 099b51b927f..a7718d6c29e 100644
@@ -91,7 +91,10 @@
 		#interrupt-cells = <3>;
 		status = "okay";
 		interrupt-controller;
-		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		/* vcpumntirq: virtual CPU interface maintenance interrupt */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
 		reg = /bits/ 64 <SBSA_GIC_DIST_BASE_ADDR SBSA_GIC_DIST_LENGTH>,
 		      /bits/ 64 <SBSA_GIC_REDIST_BASE_ADDR SBSA_GIC_REDIST_LENGTH>,
 		      /bits/ 64 <0 0>,
Signature · 1 line
2.49.0
#1 lore raw
Quoted 8 lines · Patrick Rudolph

Change the vcpumntirq in the GICv3 node from SPI to PPI.

Prevents Linux from complaining:
'[Firmware Bug]: CPU interface incapable of MMIO access'

Fixes 6d722894fd48 "board: emulation: Add QEMU sbsa support"

[...]

Applied to u-boot/master, thanks!

[1/1] arm/dts/qemu-sbsa: Fix interrupt

      commit: d1555de5fa21c06118540dcd4a627a1af29bbb40
Signature · 1 line
Tom