6.14.9-rc1 review
Subsystems (5)
Greg Kroah-Hartman
maintainerPATCH 110/783 mmc: host: Wait for Vdd to settle on card power off
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Erick Shepherd <[email protected]>
[ Upstream commit 31e75ed964582257f59156ce6a42860e1ae4cc39 ]
The SD spec version 6.0 section 6.4.1.5 requires that Vdd must be lowered to less than 0.5V for a minimum of 1 ms when powering off a card. Increase wait to 15 ms so that voltage has time to drain down to 0.5V and cards can power off correctly. Issues with voltage drain time were only observed on Apollo Lake and Bay Trail host controllers so this fix is limited to those devices.
--- drivers/mmc/host/sdhci-pci-core.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/mmc/host/sdhci-pci-core.c +5 -1
@@ -610,8 +610,12 @@ static void sdhci_intel_set_power(struct sdhci_host *host, unsigned char mode,sdhci_set_power (host, mode, vdd); -if (mode ==MMC_POWER_OFF ) +if (mode ==MMC_POWER_OFF ) { +if (slot->chip->pdev->device ==PCI_DEVICE_ID_INTEL_APL_SD || + slot->chip->pdev->device ==PCI_DEVICE_ID_INTEL_BYT_SD ) +usleep_range (15000 ,17500 );return ; + }/* * Bus power might not enable after D3 -> D0 transition due to the
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 111/783 drm/amdgpu: Skip pcie_replay_count sysfs creation for VF
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Victor Skvortsov <[email protected]>
[ Upstream commit 9c05636ca72a2dbf41bf0900380f438a0de47319 ]
VFs cannot read the NAK_COUNTER register. This information is only available through PMFW metrics.
--- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 27 ++++++++++++++++------ 1 file changed, 20 insertions(+), 7 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +20 -7
@@ -224,6 +224,24 @@ static ssize_t amdgpu_device_get_pcie_replay_count(struct device *dev, static DEVICE_ATTR(pcie_replay_count, 0444, amdgpu_device_get_pcie_replay_count, NULL); +static int amdgpu_device_attr_sysfs_init (struct amdgpu_device *adev) +{ +int ret =0 ; + +if (!amdgpu_sriov_vf (adev)) + ret =sysfs_create_file (&adev->dev->kobj, + &dev_attr_pcie_replay_count.attr); + +return ret; +} + +static void amdgpu_device_attr_sysfs_fini (struct amdgpu_device *adev) +{ +if (!amdgpu_sriov_vf (adev)) +sysfs_remove_file (&adev->dev->kobj, + &dev_attr_pcie_replay_count.attr); +} +static ssize_t amdgpu_sysfs_reg_state_get (struct file *f,struct kobject *kobj,struct bin_attribute *attr,char *buf,loff_t ppos,size_t count)
@@ -4123,11 +4141,6 @@ static bool amdgpu_device_check_iommu_remap(struct amdgpu_device *adev) }#endif -static const struct attribute *amdgpu_dev_attributes[] = { - &dev_attr_pcie_replay_count.attr, -NULL -}; -static void amdgpu_device_set_mcbp (struct amdgpu_device *adev) {if (amdgpu_mcbp ==1 )
@@ -4572,7 +4585,7 @@ int amdgpu_device_init(struct amdgpu_device *adev, }else adev->ucode_sysfs_en = true; - r =sysfs_create_files (&adev->dev->kobj, amdgpu_dev_attributes); + r =amdgpu_device_attr_sysfs_init (adev);if (r)dev_err (adev->dev,"Could not create amdgpu device attr\n" );
@@ -4709,7 +4722,7 @@ void amdgpu_device_fini_hw(struct amdgpu_device *adev)amdgpu_pm_sysfs_fini (adev);if (adev->ucode_sysfs_en)amdgpu_ucode_sysfs_fini (adev); -sysfs_remove_files (&adev->dev->kobj, amdgpu_dev_attributes); +amdgpu_device_attr_sysfs_fini (adev);amdgpu_fru_sysfs_fini (adev);amdgpu_reg_state_sysfs_fini (adev);
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 112/783 cgroup/rstat: avoid disabling irqs for O(num_cpu)
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit 0efc297a3c4974dbd609ee36fc6345720b6ca735 ]
cgroup_rstat_flush_locked() grabs the irq safe cgroup_rstat_lock while iterating all possible cpus. It only drops the lock if there is scheduler or spin lock contention. If neither, then interrupts can be disabled for a long time. On large machines this can disable interrupts for a long enough time to drop network packets. On 400+ CPU machines I've seen interrupt disabled for over 40 msec.
Prevent rstat from disabling interrupts while processing all possible cpus. Instead drop and reacquire cgroup_rstat_lock for each cpu. This approach was previously discussed in
https://lore.kernel.org/lkml/ZBz%2FV5a7%[email protected]/,
though this was in the context of an non-irq rstat spin lock.
Benchmark this change with:
1) a single stat_reader process with 400 threads, each reading a test memcg's memory.stat repeatedly for 10 seconds.
2) 400 memory hog processes running in the test memcg and repeatedly charging memory until oom killed. Then they repeat charging and oom killing.
v6.14-rc6 with CONFIG_IRQSOFF_TRACER with stat_reader and hogs, finds interrupts are disabled by rstat for 45341 usec:
# => started at: _raw_spin_lock_irq
# => ended at: cgroup_rstat_flush
#
#
# _------=> CPU#
# / _-----=> irqs-off/BH-disabled
# | / _----=> need-resched # || / _---=> hardirq/softirq # ||| / _--=> preempt-depth # |||| / _-=> migrate-disable # ||||| / delay # cmd pid |||||| time | caller # \ / |||||| \ | / stat_rea-96532 52d.... 0us*: _raw_spin_lock_irq stat_rea-96532 52d.... 45342us : cgroup_rstat_flush stat_rea-96532 52d.... 45342us : tracer_hardirqs_on <-cgroup_rstat_flush stat_rea-96532 52d.... 45343us : <stack trace>
=> memcg1_stat_format
=> memory_stat_format
=> memory_stat_show
=> seq_read_iter
=> vfs_read
=> ksys_read
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
With this patch the CONFIG_IRQSOFF_TRACER doesn't find rstat to be the longest holder. The longest irqs-off holder has irqs disabled for 4142 usec, a huge reduction from previous 45341 usec rstat finding.
Running stat_reader memory.stat reader for 10 seconds:
- without memory hogs: 9.84M accesses => 12.7M accesses
- with memory hogs: 9.46M accesses => 11.1M accesses
The throughput of memory.stat access improves.
The mode of memory.stat access latency after grouping by of 2 buckets:
- without memory hogs: 64 usec => 16 usec
- with memory hogs: 64 usec => 8 usec
The memory.stat latency improves.
--- kernel/cgroup/rstat.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-)
kernel/cgroup/rstat.c +5 -7
@@ -323,13 +323,11 @@ static void cgroup_rstat_flush_locked(struct cgroup *cgrp)rcu_read_unlock (); } -/* play nice and yield if necessary */ -if (need_resched () ||spin_needbreak (&cgroup_rstat_lock)) { -__cgroup_rstat_unlock (cgrp, cpu); -if (!cond_resched ()) -cpu_relax (); -__cgroup_rstat_lock (cgrp, cpu); - } +/* play nice and avoid disabling interrupts for a long time */ +__cgroup_rstat_unlock (cgrp, cpu); +if (!cond_resched ()) +cpu_relax (); +__cgroup_rstat_lock (cgrp, cpu); } }
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 113/783 wifi: mt76: Check link_conf pointer in mt76_connac_mcu_sta_basic_tlv()
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shayne Chen <[email protected]>
[ Upstream commit 9890624c1b3948c1c7f1d0e19ef0bb7680b8c80d ]
This is a preliminary patch to introduce MLO support for MT7996 driver.
--- drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c +1 -1
@@ -391,7 +391,7 @@ void mt76_connac_mcu_sta_basic_tlv(struct mt76_dev *dev, struct sk_buff *skb, basic->conn_type =cpu_to_le32 (CONNECTION_INFRA_BC );if (vif->type ==NL80211_IFTYPE_STATION && - !is_zero_ether_addr (link_conf->bssid)) { + link_conf && !is_zero_ether_addr (link_conf->bssid)) {memcpy (basic->peer_addr, link_conf->bssid,ETH_ALEN ); basic->aid =cpu_to_le16 (vif->cfg.aid); }else {
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 114/783 wifi: mt76: scan: fix setting tx_info fields
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Felix Fietkau <[email protected]>
[ Upstream commit 5b5f1ca9ce73ab6c35e5cd3348f8432ba190d7f4 ]
ieee80211_tx_prepare_skb initializes the skb cb, so fields need to be set afterwards.
--- drivers/net/wireless/mediatek/mt76/scan.c | 21 +++++++++++++-------- 1 file changed, 13 insertions(+), 8 deletions(-)
drivers/net/wireless/mediatek/mt76/scan.c +13 -8
@@ -52,11 +52,6 @@ mt76_scan_send_probe(struct mt76_dev *dev, struct cfg80211_ssid *ssid)ether_addr_copy (hdr->addr3, req->bssid); } - info =IEEE80211_SKB_CB (skb); -if (req->no_cck) - info->flags |=IEEE80211_TX_CTL_NO_CCK_RATE ; - info->control.flags |=IEEE80211_TX_CTRL_DONT_USE_RATE_MASK ; -if (req->ie_len)skb_put_data (skb, req->ie, req->ie_len);
@@ -64,10 +59,20 @@ mt76_scan_send_probe(struct mt76_dev *dev, struct cfg80211_ssid *ssid)skb_set_queue_mapping (skb,IEEE80211_AC_VO );rcu_read_lock (); -if (ieee80211_tx_prepare_skb (phy->hw, vif, skb, band,NULL )) -mt76_tx (phy,NULL , mvif->wcid, skb); -else + +if (!ieee80211_tx_prepare_skb (phy->hw, vif, skb, band,NULL )) {ieee80211_free_txskb (phy->hw, skb); + goto out; + } + + info =IEEE80211_SKB_CB (skb); +if (req->no_cck) + info->flags |=IEEE80211_TX_CTL_NO_CCK_RATE ; + info->control.flags |=IEEE80211_TX_CTRL_DONT_USE_RATE_MASK ; + +mt76_tx (phy,NULL , mvif->wcid, skb); + +out:rcu_read_unlock (); }
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 115/783 wifi: mt76: mt7996: implement driver specific get_txpower function
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Felix Fietkau <[email protected]>
[ Upstream commit 86db2c5d4ed390b97a5b455a97e2cd9c4f3eff2b ]
Fixes reporting tx power for vifs that don't have a channel context assigned. Report the tx power of a phy that is covered by the vif's radio mask.
--- .../net/wireless/mediatek/mt76/mt7996/main.c | 29 ++++++++++++++++++- 1 file changed, 28 insertions(+), 1 deletion(-)
drivers/net/wireless/mediatek/mt76/mt7996/main.c +28 -1
@@ -601,6 +601,33 @@ static void mt7996_configure_filter(struct ieee80211_hw *hw,mutex_unlock (&dev->mt76.mutex); } +static int +mt7996_get_txpower (struct ieee80211_hw *hw,struct ieee80211_vif *vif, +unsigned int link_id,int *dbm) +{ +struct mt7996_vif *mvif = (struct mt7996_vif *)vif->drv_priv; +struct mt7996_phy *phy =mt7996_vif_link_phy (&mvif->deflink); +struct mt7996_dev *dev =mt7996_hw_dev (hw); +struct wireless_dev *wdev; +int n_chains, delta, i; + +if (!phy) { + wdev =ieee80211_vif_to_wdev (vif); +for (i =0 ; i < hw->wiphy->n_radio; i++) +if (wdev->radio_mask &BIT (i)) + phy = dev->radio_phy[i]; + +if (!phy) +return -EINVAL ; + } + + n_chains =hweight16 (phy->mt76->chainmask); + delta =mt76_tx_power_nss_delta (n_chains); + *dbm =DIV_ROUND_UP (phy->mt76->txpower_cur + delta,2 ); + +return 0 ; +} +static u8 mt7996_get_rates_table (struct mt7996_phy *phy,struct ieee80211_bss_conf *conf,bool beacon,bool mcast)
@@ -1650,7 +1677,7 @@ const struct ieee80211_ops mt7996_ops = { .remain_on_channel = mt76_remain_on_channel, .cancel_remain_on_channel = mt76_cancel_remain_on_channel, .release_buffered_frames = mt76_release_buffered_frames, - .get_txpower = mt76_get_txpower, + .get_txpower = mt7996_get_txpower, .channel_switch_beacon = mt7996_channel_switch_beacon, .get_stats = mt7996_get_stats, .get_et_sset_count = mt7996_get_et_sset_count,
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 116/783 wifi: mt76: only mark tx-status-failed frames as ACKed on mt76x0/2
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Felix Fietkau <[email protected]>
[ Upstream commit 0c5a89ceddc1728a40cb3313948401dd70e3c649 ]
The interrupt status polling is unreliable, which can cause status events to get lost. On all newer chips, txs-timeout is an indication that the packet was either never sent, or never acked.
Fixes issues with inactivity polling.
--- drivers/net/wireless/mediatek/mt76/mt76.h | 1 + drivers/net/wireless/mediatek/mt76/mt76x0/pci.c | 3 ++- drivers/net/wireless/mediatek/mt76/mt76x0/usb.c | 3 ++- drivers/net/wireless/mediatek/mt76/mt76x2/pci.c | 3 ++- drivers/net/wireless/mediatek/mt76/mt76x2/usb.c | 3 ++- drivers/net/wireless/mediatek/mt76/tx.c | 3 ++- 6 files changed, 11 insertions(+), 5 deletions(-)
drivers/net/wireless/mediatek/mt76/mt76.h +1 -0
@@ -491,6 +491,7 @@ struct mt76_hw_cap {#define MT_DRV_RX_DMA_HDR BIT(3)#define MT_DRV_HW_MGMT_TXQ BIT(4)#define MT_DRV_AMSDU_OFFLOAD BIT(5) +#define MT_DRV_IGNORE_TXS_FAILED BIT(6)struct mt76_driver_ops {u32 drv_flags;
drivers/net/wireless/mediatek/mt76/mt76x0/pci.c +2 -1
@@ -156,7 +156,8 @@ mt76x0e_probe(struct pci_dev *pdev, const struct pci_device_id *id)static const struct mt76_driver_ops drv_ops = { .txwi_size =sizeof (struct mt76x02_txwi ), .drv_flags =MT_DRV_TX_ALIGNED4_SKBS | -MT_DRV_SW_RX_AIRTIME , +MT_DRV_SW_RX_AIRTIME | +MT_DRV_IGNORE_TXS_FAILED , .survey_flags =SURVEY_INFO_TIME_TX , .update_survey = mt76x02_update_channel, .set_channel = mt76x0_set_channel,
drivers/net/wireless/mediatek/mt76/mt76x0/usb.c +2 -1
@@ -214,7 +214,8 @@ static int mt76x0u_probe(struct usb_interface *usb_intf, const struct usb_device_id *id) {static const struct mt76_driver_ops drv_ops = { - .drv_flags =MT_DRV_SW_RX_AIRTIME , + .drv_flags =MT_DRV_SW_RX_AIRTIME | +MT_DRV_IGNORE_TXS_FAILED , .survey_flags =SURVEY_INFO_TIME_TX , .update_survey = mt76x02_update_channel, .set_channel = mt76x0_set_channel,
drivers/net/wireless/mediatek/mt76/mt76x2/pci.c +2 -1
@@ -22,7 +22,8 @@ mt76x2e_probe(struct pci_dev *pdev, const struct pci_device_id *id)static const struct mt76_driver_ops drv_ops = { .txwi_size =sizeof (struct mt76x02_txwi ), .drv_flags =MT_DRV_TX_ALIGNED4_SKBS | -MT_DRV_SW_RX_AIRTIME , +MT_DRV_SW_RX_AIRTIME | +MT_DRV_IGNORE_TXS_FAILED , .survey_flags =SURVEY_INFO_TIME_TX , .update_survey = mt76x02_update_channel, .set_channel = mt76x2e_set_channel,
drivers/net/wireless/mediatek/mt76/mt76x2/usb.c +2 -1
@@ -30,7 +30,8 @@ static int mt76x2u_probe(struct usb_interface *intf, const struct usb_device_id *id) {static const struct mt76_driver_ops drv_ops = { - .drv_flags =MT_DRV_SW_RX_AIRTIME , + .drv_flags =MT_DRV_SW_RX_AIRTIME | +MT_DRV_IGNORE_TXS_FAILED , .survey_flags =SURVEY_INFO_TIME_TX , .update_survey = mt76x02_update_channel, .set_channel = mt76x2u_set_channel,
drivers/net/wireless/mediatek/mt76/tx.c +2 -1
@@ -100,7 +100,8 @@ __mt76_tx_status_skb_done(struct mt76_dev *dev, struct sk_buff *skb, u8 flags,return ;/* Tx status can be unreliable. if it fails, mark the frame as ACKed */ -if (flags &MT_TX_CB_TXS_FAILED ) { +if (flags &MT_TX_CB_TXS_FAILED && + (dev->drv->drv_flags &MT_DRV_IGNORE_TXS_FAILED )) { info->status.rates[0 ].count =0 ; info->status.rates[0 ].idx =-1 ; info->flags |=IEEE80211_TX_STAT_ACK ;
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 117/783 wifi: mt76: mt7996: use the correct vif link for scanning/roc
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Felix Fietkau <[email protected]>
[ Upstream commit 13b4c81083cc4b59fb639a511c0a9a7c38efde7e ]
Use the newly added offchannel_link pointer in vif data
--- .../net/wireless/mediatek/mt76/mt7996/mac.c | 40 +++++++++++++------ .../net/wireless/mediatek/mt76/mt7996/main.c | 1 + 2 files changed, 28 insertions(+), 13 deletions(-)
drivers/net/wireless/mediatek/mt76/mt7996/mac.c +27 -13
@@ -832,7 +832,8 @@ void mt7996_mac_write_txwi(struct mt7996_dev *dev, __le32 *txwi,u8 band_idx = (info->hw_queue &MT_TX_HW_QUEUE_PHY ) >>2 ;u8 p_fmt, q_idx, omac_idx =0 , wmm_idx =0 ;bool is_8023 = info->flags &IEEE80211_TX_CTL_HW_80211_ENCAP ; -struct mt76_vif_link *mvif; +struct mt76_vif_link *mlink =NULL ; +struct mt7996_vif *mvif;u16 tx_count =15 ;u32 val; bool inband_disc = !!(changed & (BSS_CHANGED_UNSOL_BCAST_PROBE_RESP |
@@ -840,11 +841,18 @@ void mt7996_mac_write_txwi(struct mt7996_dev *dev, __le32 *txwi,bool beacon = !!(changed & (BSS_CHANGED_BEACON |BSS_CHANGED_BEACON_ENABLED )) && (!inband_disc); - mvif = vif ? (struct mt76_vif_link *)vif->drv_priv :NULL ; -if (mvif) { - omac_idx = mvif->omac_idx; - wmm_idx = mvif->wmm_idx; - band_idx = mvif->band_idx; +if (vif) { + mvif = (struct mt7996_vif *)vif->drv_priv; +if (wcid->offchannel) + mlink =rcu_dereference (mvif->mt76.offchannel_link); +if (!mlink) + mlink = &mvif->deflink.mt76; + } + +if (mlink) { + omac_idx = mlink->omac_idx; + wmm_idx = mlink->wmm_idx; + band_idx = mlink->band_idx; }if (inband_disc) {
@@ -910,13 +918,13 @@ void mt7996_mac_write_txwi(struct mt7996_dev *dev, __le32 *txwi,is_multicast_ether_addr (hdr->addr1);u8 idx =MT7996_BASIC_RATES_TBL ; -if (mvif) { -if (mcast && mvif->mcast_rates_idx) - idx = mvif->mcast_rates_idx; -else if (beacon && mvif->beacon_rates_idx) - idx = mvif->beacon_rates_idx; +if (mlink) { +if (mcast && mlink->mcast_rates_idx) + idx = mlink->mcast_rates_idx; +else if (beacon && mlink->beacon_rates_idx) + idx = mlink->beacon_rates_idx;else - idx = mvif->basic_rates_idx; + idx = mlink->basic_rates_idx; } val =FIELD_PREP (MT_TXD6_TX_RATE , idx) |MT_TXD6_FIXED_BW ;
@@ -984,8 +992,14 @@ int mt7996_tx_prepare_skb(struct mt76_dev *mdev, void *txwi_ptr,if (vif) {struct mt7996_vif *mvif = (struct mt7996_vif *)vif->drv_priv; +struct mt76_vif_link *mlink =NULL ; + +if (wcid->offchannel) + mlink =rcu_dereference (mvif->mt76.offchannel_link); +if (!mlink) + mlink = &mvif->deflink.mt76; - txp->fw.bss_idx = mvif->deflink.mt76.idx; + txp->fw.bss_idx = mlink->idx; } txp->fw.token =cpu_to_le16 (id);
drivers/net/wireless/mediatek/mt76/mt7996/main.c +1 -0
@@ -249,6 +249,7 @@ int mt7996_vif_link_add(struct mt76_phy *mphy, struct ieee80211_vif *vif, mlink->band_idx = band_idx; mlink->wmm_idx = vif->type ==NL80211_IFTYPE_AP ?0 :3 ; mlink->wcid = &link->sta.wcid; + mlink->wcid->offchannel = mlink->offchannel; ret =mt7996_mcu_add_dev_info (phy, vif, link_conf, mlink, true);if (ret)
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 118/783 wifi: mt76: scan: set vif offchannel link for scanning/roc
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Felix Fietkau <[email protected]>
[ Upstream commit 3ba20af886d1f604dceeb4d4c8ff872e2c4e885e ]
The driver needs to know what vif link to use
--- drivers/net/wireless/mediatek/mt76/channel.c | 3 +++ drivers/net/wireless/mediatek/mt76/mt76.h | 2 ++ 2 files changed, 5 insertions(+)
drivers/net/wireless/mediatek/mt76/channel.c +3 -0
@@ -293,6 +293,7 @@ struct mt76_vif_link *mt76_get_vif_phy_link(struct mt76_phy *phy,kfree (mlink);return ERR_PTR (ret); } +rcu_assign_pointer (mvif->offchannel_link, mlink);return mlink; }
@@ -301,10 +302,12 @@ void mt76_put_vif_phy_link(struct mt76_phy *phy, struct ieee80211_vif *vif, struct mt76_vif_link *mlink) {struct mt76_dev *dev = phy->dev; +struct mt76_vif_data *mvif = mlink->mvif;if (IS_ERR_OR_NULL (mlink) || !mlink->offchannel)return ; +rcu_assign_pointer (mvif->offchannel_link,NULL ); dev->drv->vif_link_remove (phy, vif, &vif->bss_conf, mlink);kfree (mlink); }
drivers/net/wireless/mediatek/mt76/mt76.h +2 -0
@@ -351,6 +351,7 @@ struct mt76_wcid {u8 hw_key_idx;u8 hw_key_idx2; + u8 offchannel:1; u8 sta:1; u8 sta_disabled:1; u8 amsdu:1;
@@ -788,6 +789,7 @@ struct mt76_vif_link {struct mt76_vif_data {struct mt76_vif_link __rcu *link[IEEE80211_MLD_MAX_NUM_LINKS ]; +struct mt76_vif_link __rcu *offchannel_link;struct mt76_phy *roc_phy;u16 valid_links;
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 119/783 wifi: mt76: mt7996: fix SER reset trigger on WED reset
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rex Lu <[email protected]>
[ Upstream commit 8d38abdf6c182225c5c0a81451fa51b7b36a635d ]
The firmware needs a specific trigger when WED is being reset due to an ethernet reset condition. This helps prevent further L1 SER failure.
--- drivers/net/wireless/mediatek/mt76/mt7996/mcu.h | 3 ++- drivers/net/wireless/mediatek/mt76/mt7996/mmio.c | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-)
drivers/net/wireless/mediatek/mt76/mt7996/mcu.h +2 -1
@@ -908,7 +908,8 @@ enum {UNI_CMD_SER_SET_RECOVER_L3_TX_DISABLE ,UNI_CMD_SER_SET_RECOVER_L3_BF ,UNI_CMD_SER_SET_RECOVER_L4_MDP , -UNI_CMD_SER_SET_RECOVER_FULL , +UNI_CMD_SER_SET_RECOVER_FROM_ETH , +UNI_CMD_SER_SET_RECOVER_FULL =8 ,UNI_CMD_SER_SET_SYSTEM_ASSERT ,/* action */ UNI_CMD_SER_ENABLE = 1,
drivers/net/wireless/mediatek/mt76/mt7996/mmio.c +1 -1
@@ -281,7 +281,7 @@ static int mt7996_mmio_wed_reset(struct mtk_wed_device *wed)if (test_and_set_bit (MT76_STATE_WED_RESET , &mphy->state))return -EBUSY ; - ret =mt7996_mcu_set_ser (dev,UNI_CMD_SER_TRIGGER ,UNI_CMD_SER_SET_RECOVER_L1 , + ret =mt7996_mcu_set_ser (dev,UNI_CMD_SER_TRIGGER ,UNI_CMD_SER_SET_RECOVER_FROM_ETH , mphy->band_idx);if (ret) goto out;
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 120/783 wifi: mt76: mt7996: revise TXS size
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Benjamin Lin <[email protected]>
[ Upstream commit 593c829b4326f7b3b15a69e97c9044ecbad3c319 ]
Size of MPDU/PPDU TXS is 12 DWs.
In mt7996/mt7992, last 4 DWs are reserved, so TXS size was mistakenly considered to be 8 DWs. However, in mt7990, 9th DW of TXS starts to be used.
--- drivers/net/wireless/mediatek/mt76/mt76_connac3_mac.h | 3 +++ drivers/net/wireless/mediatek/mt76/mt7996/mac.c | 4 ++-- 2 files changed, 5 insertions(+), 2 deletions(-)
drivers/net/wireless/mediatek/mt76/mt76_connac3_mac.h +3 -0
@@ -314,6 +314,9 @@ enum tx_frag_idx {#define MT_TXFREE_INFO_COUNT GENMASK(27, 24)#define MT_TXFREE_INFO_STAT GENMASK(29, 28) +#define MT_TXS_HDR_SIZE 4/* Unit: DW */ +#define MT_TXS_SIZE 12/* Unit: DW */ +#define MT_TXS0_BW GENMASK(31, 29)#define MT_TXS0_TID GENMASK(28, 26)#define MT_TXS0_AMPDU BIT(25)
drivers/net/wireless/mediatek/mt76/mt7996/mac.c +2 -2
@@ -1413,7 +1413,7 @@ bool mt7996_rx_check(struct mt76_dev *mdev, void *data, int len)mt7996_mac_tx_free (dev, data, len);return false;case PKT_TYPE_TXS : -for (rxd +=4 ; rxd +8 <= end; rxd +=8 ) +for (rxd +=MT_TXS_HDR_SIZE ; rxd +MT_TXS_SIZE <= end; rxd +=MT_TXS_SIZE )mt7996_mac_add_txs (dev, rxd);return false;case PKT_TYPE_RX_FW_MONITOR :
@@ -1456,7 +1456,7 @@ void mt7996_queue_rx_skb(struct mt76_dev *mdev, enum mt76_rxq_id q,mt7996_mcu_rx_event (dev, skb);break ;case PKT_TYPE_TXS : -for (rxd +=4 ; rxd +8 <= end; rxd +=8 ) +for (rxd +=MT_TXS_HDR_SIZE ; rxd +MT_TXS_SIZE <= end; rxd +=MT_TXS_SIZE )mt7996_mac_add_txs (dev, rxd);dev_kfree_skb (skb);break ;
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 121/783 wifi: mt76: mt7925: load the appropriate CLC data based on hardware type
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ming Yen Hsieh <[email protected]>
[ Upstream commit f2027ef3f733d3f0bb7f27fa3343784058f946ab ]
Read the EEPROM to determine the hardware type and uses this to load the correct CLC data.
--- .../net/wireless/mediatek/mt76/mt7925/mcu.c | 61 ++++++++++++++++++- .../wireless/mediatek/mt76/mt7925/mt7925.h | 3 + 2 files changed, 63 insertions(+), 1 deletion(-)
drivers/net/wireless/mediatek/mt76/mt7925/mcu.c +60 -1
@@ -631,6 +631,54 @@ int mt7925_mcu_uni_rx_ba(struct mt792x_dev *dev, enable, false); } +static int mt7925_mcu_read_eeprom (struct mt792x_dev *dev,u32 offset,u8 *val) +{ +struct { +u8 rsv[4 ]; + +__le16 tag; +__le16 len; + +__le32 addr; +__le32 valid; +u8 data[MT7925_EEPROM_BLOCK_SIZE ]; + } __packed req = { + .tag =cpu_to_le16 (1 ), + .len =cpu_to_le16 (sizeof (req) -4 ), + .addr =cpu_to_le32 (round_down (offset, +MT7925_EEPROM_BLOCK_SIZE )), + }; +struct evt { +u8 rsv[4 ]; + +__le16 tag; +__le16 len; + +__le32 ver; +__le32 addr; +__le32 valid; +__le32 size; +__le32 magic_num; +__le32 type; +__le32 rsv1[4 ]; +u8 data[32 ]; + } __packed *res; +struct sk_buff *skb; +int ret; + + ret =mt76_mcu_send_and_get_msg (&dev->mt76,MCU_WM_UNI_CMD_QUERY (EFUSE_CTRL ), + &req,sizeof (req), true, &skb); +if (ret) +return ret; + + res = (struct evt *)skb->data; + *val = res->data[offset %MT7925_EEPROM_BLOCK_SIZE ]; + +dev_kfree_skb (skb); + +return 0 ; +} +static int mt7925_load_clc (struct mt792x_dev *dev,const char *fw_name) {const struct mt76_connac2_fw_trailer *hdr;
@@ -639,13 +687,20 @@ static int mt7925_load_clc(struct mt792x_dev *dev, const char *fw_name)struct mt76_dev *mdev = &dev->mt76;struct mt792x_phy *phy = &dev->phy;const struct firmware *fw; +u8 *clc_base =NULL , hw_encap =0 ;int ret, i, len, offset =0 ; -u8 *clc_base =NULL ;if (mt7925_disable_clc ||mt76_is_usb (&dev->mt76))return 0 ; +if (mt76_is_mmio (&dev->mt76)) { + ret =mt7925_mcu_read_eeprom (dev,MT_EE_HW_TYPE , &hw_encap); +if (ret) +return ret; + hw_encap =u8_get_bits (hw_encap,MT_EE_HW_TYPE_ENCAP ); + } + ret =request_firmware (&fw, fw_name, mdev->dev);if (ret)return ret;
@@ -690,6 +745,10 @@ static int mt7925_load_clc(struct mt792x_dev *dev, const char *fw_name)if (phy->clc[clc->idx])continue ; +/* header content sanity */ +if (u8_get_bits (clc->type,MT_EE_HW_TYPE_ENCAP ) != hw_encap) +continue ; + phy->clc[clc->idx] =devm_kmemdup (mdev->dev, clc,le32_to_cpu (clc->len),GFP_KERNEL );
drivers/net/wireless/mediatek/mt76/mt7925/mt7925.h +3 -0
@@ -167,9 +167,12 @@ enum mt7925_eeprom_field {MT_EE_CHIP_ID =0x000 ,MT_EE_VERSION =0x002 ,MT_EE_MAC_ADDR =0x004 , +MT_EE_HW_TYPE =0xa71 , __MT_EE_MAX =0x9ff }; +#define MT_EE_HW_TYPE_ENCAP GENMASK(1, 0) +enum {TXPWR_USER , TXPWR_EEPROM,
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 122/783 wifi: mt76: mt7925: Simplify HIF suspend handling to avoid suspend fail
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Quan Zhou <[email protected]>
[ Upstream commit bf39813599b0375a3eebbbc6837f728554b3883a ]
System suspend failures may occur due to inappropriate handling of traffic not idle event by the WiFi driver. The WiFi firmware's traffic not idle indication does not need to be tied to suspend. Fix the flow to ensuring the system can suspend properly.
--- drivers/net/wireless/mediatek/mt76/mt7925/mcu.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-)
drivers/net/wireless/mediatek/mt76/mt7925/mcu.c +4 -8
@@ -348,14 +348,10 @@ mt7925_mcu_handle_hif_ctrl_basic(struct mt792x_dev *dev, struct tlv *tlv) basic = (struct mt7925_mcu_hif_ctrl_basic_tlv *)tlv;if (basic->hifsuspend) { -if (basic->hif_tx_traffic_status ==HIF_TRAFFIC_IDLE && - basic->hif_rx_traffic_status ==HIF_TRAFFIC_IDLE ) -/* success */ - dev->hif_idle = true; -else -/* busy */ -/* invalid */ - dev->hif_idle = false; + dev->hif_idle = true; +if (!(basic->hif_tx_traffic_status ==HIF_TRAFFIC_IDLE && + basic->hif_rx_traffic_status ==HIF_TRAFFIC_IDLE )) +dev_info (dev->mt76.dev,"Hif traffic not idle.\n" ); }else { dev->hif_resumed = true; }
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 123/783 wifi: mt76: mt7925: fix fails to enter low power mode in suspend state
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Quan Zhou <[email protected]>
[ Upstream commit 2d5630b0c9466ac6549495828aa7dce7424a272a ]
The mt7925 sometimes fails to enter low power mode during suspend. This is caused by the chip firmware sending an additional ACK event to the host after processing the suspend command. Due to timing issues, this event may not reach the host, causing the chip to get stuck. To resolve this, the ACK flag in the suspend command is removed, as it is not needed in the MT7925 architecture. This prevents the firmware from sending the additional ACK event, ensuring the device can reliably enter low power mode during suspend.
--- drivers/net/wireless/mediatek/mt76/mt7925/mcu.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/net/wireless/mediatek/mt76/mt7925/mcu.c +3 -0
@@ -3294,6 +3294,9 @@ int mt7925_mcu_fill_message(struct mt76_dev *mdev, struct sk_buff *skb,else uni_txd->option =MCU_CMD_UNI_EXT_ACK ; +if (cmd ==MCU_UNI_CMD (HIF_CTRL )) + uni_txd->option &= ~MCU_CMD_ACK ; + goto exit; }
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 124/783 x86/headers: Replace __ASSEMBLY__ with __ASSEMBLER__ in non-UAPI headers
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Huth <[email protected]>
[ Upstream commit 24a295e4ef1ca8e97d8b7015e1887b6e83e1c8be ]
While the GCC and Clang compilers already define __ASSEMBLER__ automatically when compiling assembly code, __ASSEMBLY__ is a macro that only gets defined by the Makefiles in the kernel.
This can be very confusing when switching between userspace and kernelspace coding, or when dealing with UAPI headers that rather should use __ASSEMBLER__ instead. So let's standardize on the __ASSEMBLER__ macro that is provided by the compilers now.
This is mostly a mechanical patch (done with a simple "sed -i" statement), with some manual tweaks in <asm/frame.h>, <asm/hw_irq.h> and <asm/setup.h> that mentioned this macro in comments with some missing underscores.
--- arch/x86/boot/boot.h | 4 ++-- arch/x86/entry/vdso/extable.h | 2 +- arch/x86/include/asm/alternative.h | 6 +++--- arch/x86/include/asm/asm.h | 10 +++++----- arch/x86/include/asm/boot.h | 2 +- arch/x86/include/asm/cpufeature.h | 4 ++-- arch/x86/include/asm/cpumask.h | 4 ++-- arch/x86/include/asm/current.h | 4 ++-- arch/x86/include/asm/desc_defs.h | 4 ++-- arch/x86/include/asm/dwarf2.h | 2 +- arch/x86/include/asm/fixmap.h | 4 ++-- arch/x86/include/asm/frame.h | 10 +++++----- arch/x86/include/asm/fred.h | 4 ++-- arch/x86/include/asm/fsgsbase.h | 4 ++-- arch/x86/include/asm/ftrace.h | 8 ++++---- arch/x86/include/asm/hw_irq.h | 4 ++-- arch/x86/include/asm/ibt.h | 12 ++++++------ arch/x86/include/asm/idtentry.h | 6 +++--- arch/x86/include/asm/inst.h | 2 +- arch/x86/include/asm/irqflags.h | 10 +++++----- arch/x86/include/asm/jump_label.h | 4 ++-- arch/x86/include/asm/kasan.h | 2 +- arch/x86/include/asm/kexec.h | 4 ++-- arch/x86/include/asm/linkage.h | 6 +++--- arch/x86/include/asm/mem_encrypt.h | 4 ++-- arch/x86/include/asm/msr.h | 4 ++-- arch/x86/include/asm/nops.h | 2 +- arch/x86/include/asm/nospec-branch.h | 6 +++--- arch/x86/include/asm/orc_types.h | 4 ++-- arch/x86/include/asm/page.h | 4 ++-- arch/x86/include/asm/page_32.h | 4 ++-- arch/x86/include/asm/page_32_types.h | 4 ++-- arch/x86/include/asm/page_64.h | 4 ++-- arch/x86/include/asm/page_64_types.h | 2 +- arch/x86/include/asm/page_types.h | 4 ++-- arch/x86/include/asm/paravirt.h | 14 +++++++------- arch/x86/include/asm/paravirt_types.h | 4 ++-- arch/x86/include/asm/percpu.h | 4 ++-- arch/x86/include/asm/pgtable-2level_types.h | 4 ++-- arch/x86/include/asm/pgtable-3level_types.h | 4 ++-- arch/x86/include/asm/pgtable-invert.h | 4 ++-- arch/x86/include/asm/pgtable.h | 12 ++++++------ arch/x86/include/asm/pgtable_32.h | 4 ++-- arch/x86/include/asm/pgtable_32_areas.h | 2 +- arch/x86/include/asm/pgtable_64.h | 6 +++--- arch/x86/include/asm/pgtable_64_types.h | 4 ++-- arch/x86/include/asm/pgtable_types.h | 10 +++++----- arch/x86/include/asm/prom.h | 4 ++-- arch/x86/include/asm/pti.h | 4 ++-- arch/x86/include/asm/ptrace.h | 4 ++-- arch/x86/include/asm/purgatory.h | 4 ++-- arch/x86/include/asm/pvclock-abi.h | 4 ++-- arch/x86/include/asm/realmode.h | 4 ++-- arch/x86/include/asm/segment.h | 8 ++++---- arch/x86/include/asm/setup.h | 6 +++--- arch/x86/include/asm/setup_data.h | 4 ++-- arch/x86/include/asm/shared/tdx.h | 4 ++-- arch/x86/include/asm/shstk.h | 4 ++-- arch/x86/include/asm/signal.h | 8 ++++---- arch/x86/include/asm/smap.h | 6 +++--- arch/x86/include/asm/smp.h | 4 ++-- arch/x86/include/asm/tdx.h | 4 ++-- arch/x86/include/asm/thread_info.h | 12 ++++++------ arch/x86/include/asm/unwind_hints.h | 4 ++-- arch/x86/include/asm/vdso/getrandom.h | 4 ++-- arch/x86/include/asm/vdso/gettimeofday.h | 4 ++-- arch/x86/include/asm/vdso/processor.h | 4 ++-- arch/x86/include/asm/vdso/vsyscall.h | 4 ++-- arch/x86/include/asm/xen/interface.h | 10 +++++----- arch/x86/include/asm/xen/interface_32.h | 4 ++-- arch/x86/include/asm/xen/interface_64.h | 4 ++-- arch/x86/math-emu/control_w.h | 2 +- arch/x86/math-emu/exception.h | 6 +++--- arch/x86/math-emu/fpu_emu.h | 6 +++--- arch/x86/math-emu/status_w.h | 6 +++--- arch/x86/realmode/rm/realmode.h | 4 ++-- arch/x86/realmode/rm/wakeup.h | 2 +- tools/arch/x86/include/asm/asm.h | 8 ++++---- tools/arch/x86/include/asm/nops.h | 2 +- tools/arch/x86/include/asm/orc_types.h | 4 ++-- tools/arch/x86/include/asm/pvclock-abi.h | 4 ++-- 81 files changed, 201 insertions(+), 201 deletions(-)
arch/x86/boot/boot.h +2 -2
@@ -16,7 +16,7 @@#define STACK_SIZE 1024/* Minimum number of bytes for stack */ -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <linux/stdarg.h> #include <linux/types.h>
@@ -327,6 +327,6 @@ void probe_cards(int unsafe);/* video-vesa.c */ void vesa_store_edid (void ); -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* BOOT_BOOT_H */
arch/x86/entry/vdso/extable.h +1 -1
@@ -7,7 +7,7 @@* vDSO uses a dedicated handler the addresses are relative to the overall * exception table, not each individual entry. */ -#ifdef __ASSEMBLY__ +#ifdef __ASSEMBLER__#define _ASM_VDSO_EXTABLE_HANDLE (from, to) \ ASM_VDSO_EXTABLE_HANDLE from to
arch/x86/include/asm/alternative.h +3 -3
@@ -16,7 +16,7 @@#define ALT_DIRECT_CALL (feature) ((ALT_FLAG_DIRECT_CALL << ALT_FLAGS_SHIFT) | (feature))#define ALT_CALL_ALWAYS ALT_DIRECT_CALL(X86_FEATURE_ALWAYS) -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <linux/stddef.h>
@@ -318,7 +318,7 @@ static inline int alternatives_text_reserved(void *start, void *end)void BUG_func (void );void nop_func (void ); -#else /* __ASSEMBLY__ */ +#else /* __ASSEMBLER__ */ #ifdef CONFIG_SMP .macro LOCK_PREFIX
@@ -401,6 +401,6 @@ void nop_func(void); ALTERNATIVE_2 oldinstr, newinstr_no, X86_FEATURE_ALWAYS, \ newinstr_yes, ft_flags -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* _ASM_X86_ALTERNATIVE_H */
arch/x86/include/asm/asm.h +5 -5
@@ -2,7 +2,7 @@#ifndef _ASM_X86_ASM_H#define _ASM_X86_ASM_H -#ifdef __ASSEMBLY__ +#ifdef __ASSEMBLER__# define __ASM_FORM (x, ...) x,## __VA_ARGS__# define __ASM_FORM_RAW (x, ...) x,## __VA_ARGS__# define __ASM_FORM_COMMA (x, ...) x,## __VA_ARGS__,
@@ -113,7 +113,7 @@#endif -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__ #ifndef __pic__ static __always_inline __pure void *rip_rel_ptr(void *p) {
@@ -144,7 +144,7 @@ static __always_inline __pure void *rip_rel_ptr(void *p)# include <asm/extable_fixup_types.h> /* Exception table entry */ -#ifdef __ASSEMBLY__ +#ifdef __ASSEMBLER__# define _ASM_EXTABLE_TYPE (from, to, type) \ .pushsection "__ex_table","a" ; \
@@ -164,7 +164,7 @@ static __always_inline __pure void *rip_rel_ptr(void *p)# define _ASM_NOKPROBE (entry)# endif -#else /* ! __ASSEMBLY__ */ +#else /* ! __ASSEMBLER__ */ # define DEFINE_EXTABLE_TYPE_REG \ ".macro extable_type_reg type:req reg:req\n" \
@@ -221,7 +221,7 @@ static __always_inline __pure void *rip_rel_ptr(void *p)*/ registerunsigned long current_stack_pointer asm (_ASM_SP );#define ASM_CALL_CONSTRAINT "+r" (current_stack_pointer) -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #define _ASM_EXTABLE (from, to) \ _ASM_EXTABLE_TYPE(from, to, EX_TYPE_DEFAULT)
arch/x86/include/asm/boot.h +1 -1
@@ -74,7 +74,7 @@# define BOOT_STACK_SIZE 0x1000#endif -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__extern unsigned int output_len;extern const unsigned long kernel_text_size;extern const unsigned long kernel_total_size;
arch/x86/include/asm/cpufeature.h +2 -2
@@ -4,7 +4,7 @@#include <asm/processor.h> -#if defined(__KERNEL__) && !defined(__ASSEMBLY__) +#if defined(__KERNEL__) && !defined(__ASSEMBLER__)#include <asm/asm.h> #include <linux/bitops.h>
@@ -208,5 +208,5 @@ static __always_inline bool _static_cpu_has(u16 bit)#define CPU_FEATURE_TYPEVAL boot_cpu_data.x86_vendor, boot_cpu_data.x86, \ boot_cpu_data.x86_model -#endif /* defined(__KERNEL__) && !defined(__ASSEMBLY__) */ +#endif /* defined(__KERNEL__) && !defined(__ASSEMBLER__) */ #endif /* _ASM_X86_CPUFEATURE_H */
arch/x86/include/asm/cpumask.h +2 -2
@@ -1,7 +1,7 @@/* SPDX-License-Identifier: GPL-2.0 */ #ifndef _ASM_X86_CPUMASK_H#define _ASM_X86_CPUMASK_H -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <linux/cpumask.h> extern void setup_cpu_local_masks (void );
@@ -34,5 +34,5 @@ static __always_inline void arch_cpumask_clear_cpu(int cpu, struct cpumask *dstp#define arch_cpu_is_offline (cpu) unlikely(!arch_cpu_online(cpu)) -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* _ASM_X86_CPUMASK_H */
arch/x86/include/asm/current.h +2 -2
@@ -5,7 +5,7 @@#include <linux/build_bug.h> #include <linux/compiler.h> -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <linux/cache.h> #include <asm/percpu.h>
@@ -51,6 +51,6 @@ static __always_inline struct task_struct *get_current(void)#define current get_current() -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* _ASM_X86_CURRENT_H */
arch/x86/include/asm/desc_defs.h +2 -2
@@ -58,7 +58,7 @@#define DESC_USER (_DESC_DPL(3)) -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <linux/types.h>
@@ -166,7 +166,7 @@ struct desc_ptr {unsigned long address; } __attribute__((packed)) ; -#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ /* Boot IDT definitions */ #define BOOT_IDT_ENTRIES 32
arch/x86/include/asm/dwarf2.h +1 -1
@@ -2,7 +2,7 @@#ifndef _ASM_X86_DWARF2_H#define _ASM_X86_DWARF2_H -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#warning "asm/dwarf2.h should be only included in pure assembly files"#endif
arch/x86/include/asm/fixmap.h +2 -2
@@ -31,7 +31,7 @@/* fixmap starts downwards from the 507th entry in level2_fixmap_pgt */ #define FIXMAP_PMD_TOP 507 -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <linux/kernel.h> #include <asm/apicdef.h> #include <asm/page.h>
@@ -196,5 +196,5 @@ void __init *early_memremap_decrypted_wp(resource_size_t phys_addr,void __early_set_fixmap (enum fixed_addresses idx,phys_addr_t phys,pgprot_t flags); -#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ #endif /* _ASM_X86_FIXMAP_H */
arch/x86/include/asm/frame.h +5 -5
@@ -11,7 +11,7 @@#ifdef CONFIG_FRAME_POINTER -#ifdef __ASSEMBLY__ +#ifdef __ASSEMBLER__ .macro FRAME_BEGIN push %_ASM_BP
@@ -51,7 +51,7 @@ .endm#endif /* CONFIG_X86_64 */ -#else /* !__ASSEMBLY__ */ +#else /* !__ASSEMBLER__ */ #define FRAME_BEGIN \ "push %" _ASM_BP "\n" \
@@ -82,18 +82,18 @@ static inline unsigned long encode_frame_pointer(struct pt_regs *regs)#endif /* CONFIG_X86_64 */ -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #define FRAME_OFFSET __ASM_SEL(4, 8)#else /* !CONFIG_FRAME_POINTER */ -#ifdef __ASSEMBLY__ +#ifdef __ASSEMBLER__ .macro ENCODE_FRAME_POINTER ptregs_offset=0 .endm -#else /* !__ASSEMBLY */ +#else /* !__ASSEMBLER__ */ #define ENCODE_FRAME_POINTER
arch/x86/include/asm/fred.h +2 -2
@@ -32,7 +32,7 @@#define FRED_CONFIG_INT_STKLVL (l) (_AT(unsigned long, l) << 9)#define FRED_CONFIG_ENTRYPOINT (p) _AT(unsigned long, (p)) -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#ifdef CONFIG_X86_FRED #include <linux/kernel.h>
@@ -113,6 +113,6 @@ static inline void fred_entry_from_kvm(unsigned int type, unsigned int vector) {static inline void fred_sync_rsp0 (unsigned long rsp0) { }static inline void fred_update_rsp0 (void ) { }#endif /* CONFIG_X86_FRED */ -#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ #endif /* ASM_X86_FRED_H */
arch/x86/include/asm/fsgsbase.h +2 -2
@@ -2,7 +2,7 @@#ifndef _ASM_FSGSBASE_H#define _ASM_FSGSBASE_H -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#ifdef CONFIG_X86_64
@@ -80,6 +80,6 @@ extern unsigned long x86_fsgsbase_read_task(struct task_struct *task,#endif /* CONFIG_X86_64 */ -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* _ASM_FSGSBASE_H */
arch/x86/include/asm/ftrace.h +4 -4
@@ -22,7 +22,7 @@#define ARCH_SUPPORTS_FTRACE_OPS 1#endif -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__extern void __fentry__ (void );static inline unsigned long ftrace_call_adjust (unsigned long addr)
@@ -118,11 +118,11 @@ struct dyn_arch_ftrace { };#endif /* CONFIG_DYNAMIC_FTRACE */ -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* CONFIG_FUNCTION_TRACER */ -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__void prepare_ftrace_return (unsigned long ip,unsigned long *parent,unsigned long frame_pointer);
@@ -166,6 +166,6 @@ static inline bool arch_trace_is_compat_syscall(struct pt_regs *regs) }#endif /* CONFIG_FTRACE_SYSCALLS && CONFIG_IA32_EMULATION */ #endif /* !COMPILE_OFFSETS */ -#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ #endif /* _ASM_X86_FTRACE_H */
arch/x86/include/asm/hw_irq.h +2 -2
@@ -16,7 +16,7 @@#include <asm/irq_vectors.h> -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <linux/percpu.h> #include <linux/profile.h>
@@ -128,6 +128,6 @@ extern char spurious_entries_start[];typedef struct irq_desc *vector_irq_t [NR_VECTORS ];DECLARE_PER_CPU (vector_irq_t, vector_irq); -#endif /* !ASSEMBLY_ */ +#endif /* !__ASSEMBLER__ */ #endif /* _ASM_X86_HW_IRQ_H */
arch/x86/include/asm/ibt.h +6 -6
@@ -21,7 +21,7 @@#define HAS_KERNEL_IBT 1 -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#ifdef CONFIG_X86_64 #define ASM_ENDBR "endbr64\n\t"
@@ -77,7 +77,7 @@ static inline bool is_endbr(u32 val) extern __noendbr u64 ibt_save(bool disable); extern __noendbr void ibt_restore(u64 save); -#else /* __ASSEMBLY__ */ +#else /* __ASSEMBLER__ */ #ifdef CONFIG_X86_64 #define ENDBR endbr64
@@ -85,13 +85,13 @@ extern __noendbr void ibt_restore(u64 save);#define ENDBR endbr32#endif -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #else /* !IBT */ #define HAS_KERNEL_IBT 0 -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#define ASM_ENDBR #define IBT_NOSEAL (name)
@@ -103,11 +103,11 @@ static inline bool is_endbr(u32 val) { return false; }static inline u64 ibt_save (bool disable) {return 0 ; }static inline void ibt_restore (u64 save) { } -#else /* __ASSEMBLY__ */ +#else /* __ASSEMBLER__ */ #define ENDBR -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* CONFIG_X86_KERNEL_IBT */
arch/x86/include/asm/idtentry.h +3 -3
@@ -7,7 +7,7 @@#define IDT_ALIGN (8 * (1 + HAS_KERNEL_IBT)) -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <linux/entry-common.h> #include <linux/hardirq.h>
@@ -474,7 +474,7 @@ static inline void fred_install_sysvec(unsigned int vector, const idtentry_t fun idt_install_sysvec(vector, asm_##function); \ } -#else /* !__ASSEMBLY__ */ +#else /* !__ASSEMBLER__ */ /* * The ASM variants for DECLARE_IDTENTRY*() which emit the ASM entry stubs.
@@ -579,7 +579,7 @@ SYM_CODE_START(spurious_entries_start) SYM_CODE_END(spurious_entries_start)#endif -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ /* * The actual entry points. Note that DECLARE_IDTENTRY*() serves two
arch/x86/include/asm/inst.h +1 -1
@@ -6,7 +6,7 @@#ifndef X86_ASM_INST_H #define X86_ASM_INST_H -#ifdef __ASSEMBLY__ +#ifdef __ASSEMBLER__#define REG_NUM_INVALID 100
arch/x86/include/asm/irqflags.h +5 -5
@@ -4,7 +4,7 @@#include <asm/processor-flags.h> -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <asm/nospec-branch.h>
@@ -101,7 +101,7 @@ static __always_inline void halt(void)#ifdef CONFIG_PARAVIRT_XXL #include <asm/paravirt.h> #else -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <linux/types.h> static __always_inline unsigned long arch_local_save_flags (void )
@@ -137,10 +137,10 @@ static __always_inline unsigned long arch_local_irq_save(void)#endif -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* CONFIG_PARAVIRT_XXL */ -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__ static __always_inline int arch_irqs_disabled_flags(unsigned long flags) {return !(flags &X86_EFLAGS_IF );
@@ -158,6 +158,6 @@ static __always_inline void arch_local_irq_restore(unsigned long flags)if (!arch_irqs_disabled_flags (flags))arch_local_irq_enable (); } -#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ #endif
arch/x86/include/asm/jump_label.h +2 -2
@@ -7,7 +7,7 @@#include <asm/asm.h> #include <asm/nops.h> -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <linux/stringify.h> #include <linux/types.h>
@@ -55,6 +55,6 @@ static __always_inline bool arch_static_branch_jump(struct static_key * const keextern int arch_jump_entry_size (struct jump_entry *entry); -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif
arch/x86/include/asm/kasan.h +1 -1
@@ -23,7 +23,7 @@ (1ULL << (__VIRTUAL_MASK_SHIFT - \ KASAN_SHADOW_SCALE_SHIFT))) -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#ifdef CONFIG_KASAN void __init kasan_early_init (void );
arch/x86/include/asm/kexec.h +2 -2
@@ -13,7 +13,7 @@# define KEXEC_CONTROL_PAGE_SIZE 4096# define KEXEC_CONTROL_CODE_MAX_SIZE 2048 -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <linux/string.h> #include <linux/kernel.h>
@@ -225,6 +225,6 @@ unsigned int arch_crash_get_elfcorehdr_size(void);#define crash_get_elfcorehdr_size arch_crash_get_elfcorehdr_size#endif -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* _ASM_X86_KEXEC_H */
arch/x86/include/asm/linkage.h +3 -3
@@ -38,7 +38,7 @@#define ASM_FUNC_ALIGN __stringify(__FUNC_ALIGN)#define SYM_F_ALIGN __FUNC_ALIGN -#ifdef __ASSEMBLY__ +#ifdef __ASSEMBLER__#if defined(CONFIG_MITIGATION_RETHUNK ) && !defined(__DISABLE_EXPORTS) && !defined(BUILD_VDSO )#define RET jmp __x86_return_thunk
@@ -50,7 +50,7 @@#endif #endif /* CONFIG_MITIGATION_RETPOLINE */ -#else /* __ASSEMBLY__ */ +#else /* __ASSEMBLER__ */ #if defined(CONFIG_MITIGATION_RETHUNK ) && !defined(__DISABLE_EXPORTS) && !defined(BUILD_VDSO )#define ASM_RET "jmp __x86_return_thunk\n\t"
@@ -62,7 +62,7 @@#endif #endif /* CONFIG_MITIGATION_RETPOLINE */ -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ /* * Depending on -fpatchable-function-entry=N,N usage (CONFIG_CALL_PADDING) the
arch/x86/include/asm/mem_encrypt.h +2 -2
@@ -10,7 +10,7 @@#ifndef __X86_MEM_ENCRYPT_H__#define __X86_MEM_ENCRYPT_H__ -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <linux/init.h> #include <linux/cc_platform.h>
@@ -114,6 +114,6 @@ void add_encrypt_protection_map(void);extern char __start_bss_decrypted[], __end_bss_decrypted[], __start_bss_decrypted_unused[]; -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* __X86_MEM_ENCRYPT_H__ */
arch/x86/include/asm/msr.h +2 -2
@@ -4,7 +4,7 @@#include "msr-index.h" -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <asm/asm.h> #include <asm/errno.h>
@@ -397,5 +397,5 @@ static inline int wrmsr_safe_regs_on_cpu(unsigned int cpu, u32 regs[8])return wrmsr_safe_regs (regs); }#endif /* CONFIG_SMP */ -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* _ASM_X86_MSR_H */
arch/x86/include/asm/nops.h +1 -1
@@ -82,7 +82,7 @@#define ASM_NOP7 _ASM_BYTES(BYTES_NOP7)#define ASM_NOP8 _ASM_BYTES(BYTES_NOP8) -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__extern const unsigned char *const x86_nops[];#endif
arch/x86/include/asm/nospec-branch.h +3 -3
@@ -177,7 +177,7 @@ add $(BITS_PER_LONG/8), %_ASM_SP; \ lfence; -#ifdef __ASSEMBLY__ +#ifdef __ASSEMBLER__/* * (ab)use RETPOLINE_SAFE on RET to annotate away 'bare' RET instructions
@@ -335,7 +335,7 @@#define CLEAR_BRANCH_HISTORY_VMEXIT #endif -#else /* __ASSEMBLY__ */ +#else /* __ASSEMBLER__ */ #define ITS_THUNK_SIZE 64
@@ -612,6 +612,6 @@ static __always_inline void mds_idle_clear_cpu_buffers(void)mds_clear_cpu_buffers (); } -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* _ASM_X86_NOSPEC_BRANCH_H_ */
arch/x86/include/asm/orc_types.h +2 -2
@@ -45,7 +45,7 @@#define ORC_TYPE_REGS 3#define ORC_TYPE_REGS_PARTIAL 4 -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <asm/byteorder.h> /*
@@ -73,6 +73,6 @@ struct orc_entry {#endif } __packed; -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* _ORC_TYPES_H */
arch/x86/include/asm/page.h +2 -2
@@ -14,7 +14,7 @@#include <asm/page_32.h> #endif /* CONFIG_X86_64 */ -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__struct page ;
@@ -84,7 +84,7 @@ static __always_inline u64 __is_canonical_address(u64 vaddr, u8 vaddr_bits) return __canonical_address(vaddr, vaddr_bits) == vaddr; } -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #include <asm-generic/memory_model.h> #include <asm-generic/getorder.h>
arch/x86/include/asm/page_32.h +2 -2
@@ -4,7 +4,7 @@#include <asm/page_32_types.h> -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#define __phys_addr_nodebug (x) ((x) - PAGE_OFFSET)#ifdef CONFIG_DEBUG_VIRTUAL
@@ -26,6 +26,6 @@ static inline void copy_page(void *to, void *from) {memcpy (to, from,PAGE_SIZE ); } -#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ #endif /* _ASM_X86_PAGE_32_H */
arch/x86/include/asm/page_32_types.h +2 -2
@@ -63,7 +63,7 @@*/ #define KERNEL_IMAGE_SIZE (512 * 1024 * 1024) -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__/* * This much address space is reserved for vmalloc() and iomap()
@@ -75,6 +75,6 @@ extern int sysctl_legacy_va_layout;extern void find_low_pfn_range (void );extern void setup_bootmem_allocator (void ); -#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ #endif /* _ASM_X86_PAGE_32_DEFS_H */
arch/x86/include/asm/page_64.h +2 -2
@@ -4,7 +4,7 @@#include <asm/page_64_types.h> -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <asm/cpufeatures.h> #include <asm/alternative.h>
@@ -94,7 +94,7 @@ static __always_inline unsigned long task_size_max(void) }#endif /* CONFIG_X86_5LEVEL */ -#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ #ifdef CONFIG_X86_VSYSCALL_EMULATION # define __HAVE_ARCH_GATE_AREA 1
arch/x86/include/asm/page_64_types.h +1 -1
@@ -2,7 +2,7 @@#ifndef _ASM_X86_PAGE_64_DEFS_H#define _ASM_X86_PAGE_64_DEFS_H -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <asm/kaslr.h> #endif
arch/x86/include/asm/page_types.h +2 -2
@@ -43,7 +43,7 @@#define IOREMAP_MAX_ORDER (PMD_SHIFT)#endif /* CONFIG_X86_64 */ -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#ifdef CONFIG_DYNAMIC_PHYSICAL_MASK extern phys_addr_t physical_mask;
@@ -66,6 +66,6 @@ bool pfn_range_is_mapped(unsigned long start_pfn, unsigned long end_pfn);extern void initmem_init (void ); -#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ #endif /* _ASM_X86_PAGE_DEFS_H */
arch/x86/include/asm/paravirt.h +7 -7
@@ -6,7 +6,7 @@#include <asm/paravirt_types.h> -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__struct mm_struct ;#endif
@@ -15,7 +15,7 @@ struct mm_struct;#include <asm/asm.h> #include <asm/nospec-branch.h> -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <linux/bug.h> #include <linux/types.h> #include <linux/cpumask.h>
@@ -720,7 +720,7 @@ static __always_inline unsigned long arch_local_irq_save(void)extern void default_banner (void );void native_pv_lock_init (void )__init ; -#else /* __ASSEMBLY__ */ +#else /* __ASSEMBLER__ */ #ifdef CONFIG_X86_64 #ifdef CONFIG_PARAVIRT_XXL
@@ -740,18 +740,18 @@ void native_pv_lock_init(void) __init;#endif /* CONFIG_PARAVIRT_XXL */ #endif /* CONFIG_X86_64 */ -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #else /* CONFIG_PARAVIRT */ # define default_banner x86_init_noop -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__static inline void native_pv_lock_init (void ) { }#endif #endif /* !CONFIG_PARAVIRT */ -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__ #ifndef CONFIG_PARAVIRT_XXL static inline void paravirt_enter_mmap(struct mm_struct *mm) {
@@ -769,5 +769,5 @@ static inline void paravirt_set_cap(void) { }#endif -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* _ASM_X86_PARAVIRT_H */
arch/x86/include/asm/paravirt_types.h +2 -2
@@ -4,7 +4,7 @@#ifdef CONFIG_PARAVIRT -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <linux/types.h> #include <asm/desc_defs.h>
@@ -518,7 +518,7 @@ unsigned long pv_native_read_cr2(void);#define paravirt_nop ((void *)nop_func) -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #define ALT_NOT_XEN ALT_NOT(X86_FEATURE_XENPV)
arch/x86/include/asm/percpu.h +2 -2
@@ -10,7 +10,7 @@# define __percpu_rel#endif -#ifdef __ASSEMBLY__ +#ifdef __ASSEMBLER__#ifdef CONFIG_SMP # define __percpu %__percpu_seg:
@@ -619,7 +619,7 @@ do { \/* We can use this directly for local CPU (faster). */ DECLARE_PER_CPU_READ_MOSTLY(unsigned long, this_cpu_off); -#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ #ifdef CONFIG_SMP
arch/x86/include/asm/pgtable-2level_types.h +2 -2
@@ -2,7 +2,7 @@#ifndef _ASM_X86_PGTABLE_2LEVEL_DEFS_H#define _ASM_X86_PGTABLE_2LEVEL_DEFS_H -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <linux/types.h> typedef unsigned long pteval_t ;
@@ -16,7 +16,7 @@ typedef union {pteval_t pte; pteval_t pte_low; } pte_t; -#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ #define SHARED_KERNEL_PMD 0
arch/x86/include/asm/pgtable-3level_types.h +2 -2
@@ -2,7 +2,7 @@#ifndef _ASM_X86_PGTABLE_3LEVEL_DEFS_H#define _ASM_X86_PGTABLE_3LEVEL_DEFS_H -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <linux/types.h> typedef u64 pteval_t ;
@@ -25,7 +25,7 @@ typedef union { };pmdval_t pmd; } pmd_t; -#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ #define SHARED_KERNEL_PMD (!static_cpu_has(X86_FEATURE_PTI))
arch/x86/include/asm/pgtable-invert.h +2 -2
@@ -2,7 +2,7 @@#ifndef _ASM_PGTABLE_INVERT_H#define _ASM_PGTABLE_INVERT_H 1 -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__/* * A clear pte value is special, and doesn't get inverted.
@@ -36,6 +36,6 @@ static inline u64 flip_protnone_guard(u64 oldval, u64 val, u64 mask)return val; } -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif
arch/x86/include/asm/pgtable.h +6 -6
@@ -15,7 +15,7 @@ cachemode2protval(_PAGE_CACHE_MODE_UC_MINUS))) \ : (prot)) -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <linux/spinlock.h> #include <asm/x86_init.h> #include <asm/pkru.h>
@@ -973,7 +973,7 @@ static inline pgd_t pti_set_user_pgtbl(pgd_t *pgdp, pgd_t pgd) }#endif /* CONFIG_MITIGATION_PAGE_TABLE_ISOLATION */ -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #ifdef CONFIG_X86_32
@@ -982,7 +982,7 @@ static inline pgd_t pti_set_user_pgtbl(pgd_t *pgdp, pgd_t pgd)# include <asm/pgtable_64.h> #endif -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <linux/mm_types.h> #include <linux/mmdebug.h> #include <linux/log2.h>
@@ -1233,12 +1233,12 @@ static inline int pgd_none(pgd_t pgd) }#endif /* CONFIG_PGTABLE_LEVELS > 4 */ -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #define KERNEL_PGD_BOUNDARY pgd_index(PAGE_OFFSET)#define KERNEL_PGD_PTRS (PTRS_PER_PGD - KERNEL_PGD_BOUNDARY) -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__extern int direct_gbpages;void init_mem_mapping (void );
@@ -1812,6 +1812,6 @@ bool arch_is_platform_page(u64 paddr);WARN_ON_ONCE (pgd_present (*pgdp) && !pgd_same (*pgdp, pgd)); \set_pgd (pgdp, pgd); \ }) -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* _ASM_X86_PGTABLE_H */
arch/x86/include/asm/pgtable_32.h +2 -2
@@ -13,7 +13,7 @@* This file contains the functions and defines necessary to modify and use * the i386 page table tree. */ -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <asm/processor.h> #include <linux/threads.h> #include <asm/paravirt.h>
@@ -45,7 +45,7 @@ do { \flush_tlb_one_kernel ((vaddr)); \ } while (0) -#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ /* * This is used to calculate the .brk reservation for initial pagetables.
arch/x86/include/asm/pgtable_32_areas.h +1 -1
@@ -13,7 +13,7 @@*/ #define VMALLOC_OFFSET (8 * 1024 * 1024) -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__extern bool __vmalloc_start_set;/* set once high_memory is set */ #endif
arch/x86/include/asm/pgtable_64.h +3 -3
@@ -5,7 +5,7 @@#include <linux/const.h> #include <asm/pgtable_64_types.h> -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__/* * This file contains the functions and defines necessary to modify and use
@@ -270,7 +270,7 @@ static inline bool gup_fast_permitted(unsigned long start, unsigned long end)#include <asm/pgtable-invert.h> -#else /* __ASSEMBLY__ */ +#else /* __ASSEMBLER__ */ #define l4_index (x) (((x) >> 39) & 511)#define pud_index (x) (((x) >> PUD_SHIFT) & (PTRS_PER_PUD - 1))
@@ -291,5 +291,5 @@ L3_START_KERNEL = pud_index(__START_KERNEL_map) i = i +1 ; \ .endr -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* _ASM_X86_PGTABLE_64_H */
arch/x86/include/asm/pgtable_64_types.h +2 -2
@@ -4,7 +4,7 @@#include <asm/sparsemem.h> -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <linux/types.h> #include <asm/kaslr.h>
@@ -44,7 +44,7 @@ static inline bool pgtable_l5_enabled(void)extern unsigned int pgdir_shift;extern unsigned int ptrs_per_p4d; -#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ #define SHARED_KERNEL_PMD 0
arch/x86/include/asm/pgtable_types.h +5 -5
@@ -164,7 +164,7 @@* to have the WB mode at index 0 (all bits clear). This is the default * right now and likely would break too much if changed. */ -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__enum page_cache_mode { _PAGE_CACHE_MODE_WB =0 , _PAGE_CACHE_MODE_WC = 1,
@@ -239,7 +239,7 @@ enum page_cache_mode {#define __PAGE_KERNEL_IO_NOCACHE __PAGE_KERNEL_NOCACHE -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#define __PAGE_KERNEL_ENC (__PAGE_KERNEL | _ENC)#define __PAGE_KERNEL_ENC_WP (__PAGE_KERNEL_WP | _ENC)
@@ -262,7 +262,7 @@ enum page_cache_mode {#define PAGE_KERNEL_IO __pgprot_mask(__PAGE_KERNEL_IO)#define PAGE_KERNEL_IO_NOCACHE __pgprot_mask(__PAGE_KERNEL_IO_NOCACHE) -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ /* * early identity mapping pte attrib macros.
@@ -281,7 +281,7 @@ enum page_cache_mode {# include <asm/pgtable_64_types.h> #endif -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <linux/types.h>
@@ -580,6 +580,6 @@ extern int __init kernel_map_pages_in_pgd(pgd_t *pgd, u64 pfn, unsigned long page_flags);extern int __init kernel_unmap_pages_in_pgd (pgd_t *pgd,unsigned long address,unsigned long numpages); -#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ #endif /* _ASM_X86_PGTABLE_DEFS_H */
arch/x86/include/asm/prom.h +2 -2
@@ -8,7 +8,7 @@#ifndef _ASM_X86_PROM_H#define _ASM_X86_PROM_H -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <linux/of.h> #include <linux/types.h>
@@ -33,5 +33,5 @@ static inline void x86_flattree_get_config(void) { }extern char cmd_line[COMMAND_LINE_SIZE ]; -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif
arch/x86/include/asm/pti.h +2 -2
@@ -1,7 +1,7 @@/* SPDX-License-Identifier: GPL-2.0 */ #ifndef _ASM_X86_PTI_H#define _ASM_X86_PTI_H -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#ifdef CONFIG_MITIGATION_PAGE_TABLE_ISOLATION extern void pti_init (void );
@@ -11,5 +11,5 @@ extern void pti_finalize(void);static inline void pti_check_boottime_disable (void ) { }#endif -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* _ASM_X86_PTI_H */
arch/x86/include/asm/ptrace.h +2 -2
@@ -6,7 +6,7 @@#include <asm/page_types.h> #include <uapi/asm/ptrace.h> -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#ifdef __i386__ struct pt_regs {
@@ -469,5 +469,5 @@ extern int do_set_thread_area(struct task_struct *p, int idx,# define do_set_thread_area_64 (p, s, t) (0)#endif -#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ #endif /* _ASM_X86_PTRACE_H */
arch/x86/include/asm/purgatory.h +2 -2
@@ -2,10 +2,10 @@#ifndef _ASM_X86_PURGATORY_H#define _ASM_X86_PURGATORY_H -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <linux/purgatory.h> extern void purgatory (void ); -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* _ASM_PURGATORY_H */
arch/x86/include/asm/pvclock-abi.h +2 -2
@@ -1,7 +1,7 @@/* SPDX-License-Identifier: GPL-2.0 */ #ifndef _ASM_X86_PVCLOCK_ABI_H#define _ASM_X86_PVCLOCK_ABI_H -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__/* * These structs MUST NOT be changed.
@@ -44,5 +44,5 @@ struct pvclock_wall_clock {#define PVCLOCK_GUEST_STOPPED (1 << 1)/* PVCLOCK_COUNTS_FROM_ZERO broke ABI and can't be used anymore. */ #define PVCLOCK_COUNTS_FROM_ZERO (1 << 2) -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* _ASM_X86_PVCLOCK_ABI_H */
arch/x86/include/asm/realmode.h +2 -2
@@ -9,7 +9,7 @@#define TH_FLAGS_SME_ACTIVE_BIT 0#define TH_FLAGS_SME_ACTIVE BIT(TH_FLAGS_SME_ACTIVE_BIT) -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <linux/types.h> #include <asm/io.h>
@@ -95,6 +95,6 @@ void reserve_real_mode(void);void load_trampoline_pgtable (void );void init_real_mode (void ); -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* _ARCH_X86_REALMODE_H */
arch/x86/include/asm/segment.h +4 -4
@@ -233,7 +233,7 @@#define VDSO_CPUNODE_BITS 12#define VDSO_CPUNODE_MASK 0xfff -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__/* Helper functions to store/load CPU and node numbers */
@@ -265,7 +265,7 @@ static inline void vdso_read_cpunode(unsigned *cpu, unsigned *node) *node = (p >> VDSO_CPUNODE_BITS); } -#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ #ifdef __KERNEL__
@@ -286,7 +286,7 @@ static inline void vdso_read_cpunode(unsigned *cpu, unsigned *node)*/ #define XEN_EARLY_IDT_HANDLER_SIZE (8 + ENDBR_INSN_SIZE) -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__extern const char early_idt_handler_array[NUM_EXCEPTION_VECTORS ][EARLY_IDT_HANDLER_SIZE ];extern void early_ignore_irq (void );
@@ -350,7 +350,7 @@ static inline void __loadsegment_fs(unsigned short value)#define savesegment (seg, value) \ asm("mov %%" #seg ",%0":"=r" (value) : : "memory") -#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ #endif /* __KERNEL__ */ #endif /* _ASM_X86_SEGMENT_H */
arch/x86/include/asm/setup.h +3 -3
@@ -27,7 +27,7 @@#define OLD_CL_ADDRESS 0x020/* Relative to real mode data */ #define NEW_CL_POINTER 0x228/* Relative to real mode data */ -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <linux/cache.h> #include <asm/bootparam.h>
@@ -141,7 +141,7 @@ extern bool builtin_cmdline_added __ro_after_init;#define builtin_cmdline_added 0#endif -#else /* __ASSEMBLY */ +#else /* __ASSEMBLER__ */ .macro __RESERVE_BRK name, size .pushsection .bss..brk, "aw"
@@ -153,6 +153,6 @@ SYM_DATA_END(__brk_\name)#define RESERVE_BRK (name, size) __RESERVE_BRK name, size -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* _ASM_X86_SETUP_H */
arch/x86/include/asm/setup_data.h +2 -2
@@ -4,7 +4,7 @@#include <uapi/asm/setup_data.h> -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__ struct pci_setup_rom { struct setup_data data;
@@ -27,6 +27,6 @@ struct efi_setup_data {u64 reserved[8 ]; }; -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* _ASM_X86_SETUP_DATA_H */
arch/x86/include/asm/shared/tdx.h +2 -2
@@ -106,7 +106,7 @@#define TDX_PS_1G 2#define TDX_PS_NR (TDX_PS_1G + 1) -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <linux/compiler_attributes.h>
@@ -177,5 +177,5 @@ static __always_inline u64 hcall_func(u64 exit_reason)return exit_reason; } -#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ #endif /* _ASM_X86_SHARED_TDX_H */
arch/x86/include/asm/shstk.h +2 -2
@@ -2,7 +2,7 @@#ifndef _ASM_X86_SHSTK_H#define _ASM_X86_SHSTK_H -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <linux/types.h> struct task_struct ;
@@ -37,6 +37,6 @@ static inline int shstk_update_last_frame(unsigned long val) { return 0; }static inline bool shstk_is_enabled (void ) {return false; }#endif /* CONFIG_X86_USER_SHADOW_STACK */ -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* _ASM_X86_SHSTK_H */
arch/x86/include/asm/signal.h +4 -4
@@ -2,7 +2,7 @@#ifndef _ASM_X86_SIGNAL_H#define _ASM_X86_SIGNAL_H -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <linux/linkage.h> /* Most things should be clean enough to redefine this at will, if care
@@ -28,9 +28,9 @@ typedef struct {#define SA_IA32_ABI 0x02000000u#define SA_X32_ABI 0x01000000u -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #include <uapi/asm/signal.h> -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#define __ARCH_HAS_SA_RESTORER
@@ -101,5 +101,5 @@ struct pt_regs;#endif /* !__i386__ */ -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* _ASM_X86_SIGNAL_H */
arch/x86/include/asm/smap.h +3 -3
@@ -13,7 +13,7 @@#include <asm/cpufeatures.h> #include <asm/alternative.h> -#ifdef __ASSEMBLY__ +#ifdef __ASSEMBLER__#define ASM_CLAC \ ALTERNATIVE "", "clac", X86_FEATURE_SMAP
@@ -21,7 +21,7 @@#define ASM_STAC \ ALTERNATIVE "", "stac", X86_FEATURE_SMAP -#else /* __ASSEMBLY__ */ +#else /* __ASSEMBLER__ */ static __always_inline void clac(void) {
@@ -61,6 +61,6 @@ static __always_inline void smap_restore(unsigned long flags)#define ASM_STAC \ ALTERNATIVE("", "stac", X86_FEATURE_SMAP) -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* _ASM_X86_SMAP_H */
arch/x86/include/asm/smp.h +2 -2
@@ -1,7 +1,7 @@/* SPDX-License-Identifier: GPL-2.0 */ #ifndef _ASM_X86_SMP_H#define _ASM_X86_SMP_H -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <linux/cpumask.h> #include <asm/cpumask.h>
@@ -175,7 +175,7 @@ extern void nmi_selftest(void);extern unsigned int smpboot_control;extern unsigned long apic_mmio_base; -#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ /* Control bits for startup_64 */ #define STARTUP_READ_APICID 0x80000000
arch/x86/include/asm/tdx.h +2 -2
@@ -30,7 +30,7 @@#define TDX_SUCCESS 0ULL#define TDX_RND_NO_ENTROPY 0x8000020300000000ULL -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <uapi/asm/mce.h>
@@ -126,5 +126,5 @@ static inline int tdx_enable(void) { return -ENODEV; }static inline const char *tdx_dump_mce_info (struct mce *m) {return NULL ; }#endif /* CONFIG_INTEL_TDX_HOST */ -#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ #endif /* _ASM_X86_TDX_H */
arch/x86/include/asm/thread_info.h +6 -6
@@ -54,7 +54,7 @@* - this struct should fit entirely inside of one cache line * - this struct shares the supervisor stack pages */ -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__struct task_struct ;#include <asm/cpufeature.h> #include <linux/atomic.h>
@@ -73,7 +73,7 @@ struct thread_info { .flags = 0, \ } -#else /* !__ASSEMBLY__ */ +#else /* !__ASSEMBLER__ */ #include <asm/asm-offsets.h>
@@ -161,7 +161,7 @@ struct thread_info {* * preempt_count needs to be 1 initially, until the scheduler is functional. */ -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__/* * Walks up the stack frames to make sure that the specified object is
@@ -213,7 +213,7 @@ static inline int arch_within_stack_frames(const void * const stack, #endif } -#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ /* * Thread-synchronous status.
@@ -224,7 +224,7 @@ static inline int arch_within_stack_frames(const void * const stack,*/ #define TS_COMPAT 0x0002/* 32bit syscall active (64BIT)*/ -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#ifdef CONFIG_COMPAT #define TS_I386_REGS_POKED 0x0004/* regs poked by 32-bit ptracer */
@@ -242,6 +242,6 @@ static inline int arch_within_stack_frames(const void * const stack,extern void arch_setup_new_exec (void );#define arch_setup_new_exec arch_setup_new_exec -#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ #endif /* _ASM_X86_THREAD_INFO_H */
arch/x86/include/asm/unwind_hints.h +2 -2
@@ -5,7 +5,7 @@#include "orc_types.h" -#ifdef __ASSEMBLY__ +#ifdef __ASSEMBLER__ .macro UNWIND_HINT_END_OF_STACKUNWIND_HINT type=UNWIND_HINT_TYPE_END_OF_STACK
@@ -88,6 +88,6 @@#define UNWIND_HINT_RESTORE \ UNWIND_HINT(UNWIND_HINT_TYPE_RESTORE, 0, 0, 0) -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* _ASM_X86_UNWIND_HINTS_H */
arch/x86/include/asm/vdso/getrandom.h +2 -2
@@ -5,7 +5,7 @@#ifndef __ASM_VDSO_GETRANDOM_H#define __ASM_VDSO_GETRANDOM_H -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <asm/unistd.h>
@@ -37,6 +37,6 @@ static __always_inline const struct vdso_rng_data *__arch_get_vdso_rng_data(voidreturn &vdso_rng_data; } -#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ #endif /* __ASM_VDSO_GETRANDOM_H */
arch/x86/include/asm/vdso/gettimeofday.h +2 -2
@@ -10,7 +10,7 @@#ifndef __ASM_VDSO_GETTIMEOFDAY_H#define __ASM_VDSO_GETTIMEOFDAY_H -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <uapi/linux/time.h> #include <asm/vgtod.h>
@@ -350,6 +350,6 @@ static __always_inline u64 vdso_calc_ns(const struct vdso_data *vd, u64 cycles, }#define vdso_calc_ns vdso_calc_ns -#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ #endif /* __ASM_VDSO_GETTIMEOFDAY_H */
arch/x86/include/asm/vdso/processor.h +2 -2
@@ -5,7 +5,7 @@#ifndef __ASM_VDSO_PROCESSOR_H#define __ASM_VDSO_PROCESSOR_H -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__/* REP NOP (PAUSE) is a good thing to insert into busy-wait loops. */ static __always_inline void rep_nop(void)
@@ -22,6 +22,6 @@ struct getcpu_cache;notrace long __vdso_getcpu (unsigned *cpu,unsigned *node,struct getcpu_cache *unused); -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* __ASM_VDSO_PROCESSOR_H */
arch/x86/include/asm/vdso/vsyscall.h +2 -2
@@ -10,7 +10,7 @@#define VDSO_PAGE_PVCLOCK_OFFSET 0#define VDSO_PAGE_HVCLOCK_OFFSET 1 -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <vdso/datapage.h> #include <asm/vgtod.h>
@@ -37,6 +37,6 @@ struct vdso_rng_data *__x86_get_k_vdso_rng_data(void)/* The asm-generic header needs to be included after the definitions above */ #include <asm-generic/vdso/vsyscall.h> -#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ #endif /* __ASM_VDSO_VSYSCALL_H */
arch/x86/include/asm/xen/interface.h +5 -5
@@ -72,7 +72,7 @@#endif #endif -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__/* Explicitly size integers that represent pfns in the public interface * with Xen so that on ARM we can have one ABI that works for 32 and 64 * bit guests. */
@@ -137,7 +137,7 @@ DEFINE_GUEST_HANDLE(xen_ulong_t);#define TI_SET_DPL (_ti, _dpl) ((_ti)->flags |= (_dpl))#define TI_SET_IF (_ti, _if) ((_ti)->flags |= ((!!(_if))<<2)) -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__ struct trap_info { uint8_t vector; /* exception vector */ uint8_t flags; /* 0-3: privilege level; 4: clear event enable? */
@@ -186,7 +186,7 @@ struct arch_shared_info {uint32_t wc_sec_hi; #endif }; -#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ #ifdef CONFIG_X86_32 #include <asm/xen/interface_32.h>
@@ -196,7 +196,7 @@ struct arch_shared_info {#include <asm/pvclock-abi.h> -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__/* * The following is all CPU context. Note that the fpu_ctxt block is filled * in by FXSAVE if the CPU has feature FXSR; otherwise FSAVE is used.
@@ -376,7 +376,7 @@ struct xen_pmu_arch { } c; }; -#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ /* * Prefix forces emulation of some non-trapping instructions.
arch/x86/include/asm/xen/interface_32.h +2 -2
@@ -44,7 +44,7 @@*/ #define __HYPERVISOR_VIRT_START 0xF5800000 -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__ struct cpu_user_regs { uint32_t ebx;
@@ -85,7 +85,7 @@ typedef struct xen_callback xen_callback_t;#define XEN_CALLBACK (__cs, __eip) \ ((struct xen_callback){ .cs = (__cs), .eip = (unsigned long)(__eip) }) -#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ /*
arch/x86/include/asm/xen/interface_64.h +2 -2
@@ -77,7 +77,7 @@#define VGCF_in_syscall (1<<_VGCF_in_syscall)#define VGCF_IN_SYSCALL VGCF_in_syscall -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__ struct iret_context {/* Top of stack (%rsp at point of hypercall). */
@@ -143,7 +143,7 @@ typedef unsigned long xen_callback_t;#define XEN_CALLBACK (__cs, __rip) \ ((unsigned long)(__rip)) -#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ #endif /* _ASM_X86_XEN_INTERFACE_64_H */
arch/x86/math-emu/control_w.h +1 -1
@@ -11,7 +11,7 @@#ifndef _CONTROLW_H_#define _CONTROLW_H_ -#ifdef __ASSEMBLY__ +#ifdef __ASSEMBLER__#define _Const_ (x) $##x#else #define _Const_ (x) x
arch/x86/math-emu/exception.h +3 -3
@@ -10,7 +10,7 @@#ifndef _EXCEPTION_H_#define _EXCEPTION_H_ -#ifdef __ASSEMBLY__ +#ifdef __ASSEMBLER__#define Const_ (x) $##x#else #define Const_ (x) x
@@ -37,7 +37,7 @@#define PRECISION_LOST_UP Const_((EX_Precision | SW_C1))#define PRECISION_LOST_DOWN Const_(EX_Precision) -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#ifdef DEBUG #define EXCEPTION (x) { printk("exception in %s at line %d\n", \
@@ -46,6 +46,6 @@#define EXCEPTION (x) FPU_exception(x)#endif -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* _EXCEPTION_H_ */
arch/x86/math-emu/fpu_emu.h +3 -3
@@ -20,7 +20,7 @@*/ #define PECULIAR_486 -#ifdef __ASSEMBLY__ +#ifdef __ASSEMBLER__#include "fpu_asm.h" #define Const (x) $##x#else
@@ -68,7 +68,7 @@#define FPU_Exception Const(0x80000000)/* Added to tag returns. */ -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include "fpu_system.h"
@@ -213,6 +213,6 @@ asmlinkage int FPU_round(FPU_REG *arg, unsigned int extent, int dummy,#include "fpu_proto.h" #endif -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* _FPU_EMU_H_ */
arch/x86/math-emu/status_w.h +3 -3
@@ -13,7 +13,7 @@#include "fpu_emu.h" /* for definition of PECULIAR_486 */ -#ifdef __ASSEMBLY__ +#ifdef __ASSEMBLER__#define Const__ (x) $##x#else #define Const__ (x) x
@@ -37,7 +37,7 @@#define SW_Exc_Mask Const__(0x27f)/* Status word exception bit mask */ -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#define COMP_A_gt_B 1#define COMP_A_eq_B 2
@@ -63,6 +63,6 @@ static inline void setcc(int cc)# define clear_C1 ()#endif /* PECULIAR_486 */ -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* _STATUS_H_ */
arch/x86/realmode/rm/realmode.h +2 -2
@@ -2,7 +2,7 @@#ifndef ARCH_X86_REALMODE_RM_REALMODE_H #define ARCH_X86_REALMODE_RM_REALMODE_H -#ifdef __ASSEMBLY__ +#ifdef __ASSEMBLER__/* * 16-bit ljmpw to the real_mode_seg
@@ -12,7 +12,7 @@*/ #define LJMPW_RM (to) .byte 0xea ; .word (to), real_mode_seg -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ /* * Signature at the end of the realmode region
arch/x86/realmode/rm/wakeup.h +1 -1
@@ -7,7 +7,7 @@#ifndef ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H #define ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <linux/types.h> /* This must match data at wakeup.S */
tools/arch/x86/include/asm/asm.h +4 -4
@@ -2,7 +2,7 @@#ifndef _ASM_X86_ASM_H#define _ASM_X86_ASM_H -#ifdef __ASSEMBLY__ +#ifdef __ASSEMBLER__# define __ASM_FORM (x, ...) x,## __VA_ARGS__# define __ASM_FORM_RAW (x, ...) x,## __VA_ARGS__# define __ASM_FORM_COMMA (x, ...) x,## __VA_ARGS__,
@@ -123,7 +123,7 @@#ifdef __KERNEL__/* Exception table entry */ -#ifdef __ASSEMBLY__ +#ifdef __ASSEMBLER__# define _ASM_EXTABLE_HANDLE (from, to, handler) \ .pushsection "__ex_table","a" ; \ .balign 4 ; \
@@ -154,7 +154,7 @@# define _ASM_NOKPROBE (entry)# endif -#else /* ! __ASSEMBLY__ */ +#else /* ! __ASSEMBLER__ */ # define _EXPAND_EXTABLE_HANDLE (x) #x# define _ASM_EXTABLE_HANDLE (from, to, handler) \ " .pushsection \"__ex_table\",\"a\"\n" \
@@ -186,7 +186,7 @@*/ registerunsigned long current_stack_pointer asm (_ASM_SP );#define ASM_CALL_CONSTRAINT "+r" (current_stack_pointer) -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* __KERNEL__ */
tools/arch/x86/include/asm/nops.h +1 -1
@@ -82,7 +82,7 @@#define ASM_NOP7 _ASM_BYTES(BYTES_NOP7)#define ASM_NOP8 _ASM_BYTES(BYTES_NOP8) -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__extern const unsigned char *const x86_nops[];#endif
tools/arch/x86/include/asm/orc_types.h +2 -2
@@ -45,7 +45,7 @@#define ORC_TYPE_REGS 3#define ORC_TYPE_REGS_PARTIAL 4 -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <asm/byteorder.h> /*
@@ -73,6 +73,6 @@ struct orc_entry {#endif } __packed; -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* _ORC_TYPES_H */
tools/arch/x86/include/asm/pvclock-abi.h +2 -2
@@ -1,7 +1,7 @@/* SPDX-License-Identifier: GPL-2.0 */ #ifndef _ASM_X86_PVCLOCK_ABI_H#define _ASM_X86_PVCLOCK_ABI_H -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__/* * These structs MUST NOT be changed.
@@ -44,5 +44,5 @@ struct pvclock_wall_clock {#define PVCLOCK_GUEST_STOPPED (1 << 1)/* PVCLOCK_COUNTS_FROM_ZERO broke ABI and can't be used anymore. */ #define PVCLOCK_COUNTS_FROM_ZERO (1 << 2) -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* _ASM_X86_PVCLOCK_ABI_H */
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 125/783 x86/headers: Replace __ASSEMBLY__ with __ASSEMBLER__ in UAPI headers
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Huth <[email protected]>
[ Upstream commit 8a141be3233af7d4f7014ebc44d5452d46b2b1be ]
__ASSEMBLY__ is only defined by the Makefile of the kernel, so this is not really useful for UAPI headers (unless the userspace Makefile defines it, too). Let's switch to __ASSEMBLER__ which gets set automatically by the compiler when compiling assembly code.
--- arch/x86/include/uapi/asm/bootparam.h | 4 ++-- arch/x86/include/uapi/asm/e820.h | 4 ++-- arch/x86/include/uapi/asm/ldt.h | 4 ++-- arch/x86/include/uapi/asm/msr.h | 4 ++-- arch/x86/include/uapi/asm/ptrace-abi.h | 6 +++--- arch/x86/include/uapi/asm/ptrace.h | 4 ++-- arch/x86/include/uapi/asm/setup_data.h | 4 ++-- arch/x86/include/uapi/asm/signal.h | 8 ++++---- 8 files changed, 19 insertions(+), 19 deletions(-)
arch/x86/include/uapi/asm/bootparam.h +2 -2
@@ -26,7 +26,7 @@#define XLF_5LEVEL_ENABLED (1<<6)#define XLF_MEM_ENCRYPTION (1<<7) -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <linux/types.h> #include <linux/screen_info.h>
@@ -210,6 +210,6 @@ enum x86_hardware_subarch { X86_NR_SUBARCHS, }; -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* _ASM_X86_BOOTPARAM_H */
arch/x86/include/uapi/asm/e820.h +2 -2
@@ -54,7 +54,7 @@*/ #define E820_RESERVED_KERN 128 -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__ #include <linux/types.h> struct e820entry { __u64 addr; /* start of memory segment */
@@ -76,7 +76,7 @@ struct e820map {#define BIOS_ROM_BASE 0xffe00000#define BIOS_ROM_END 0xffffffff -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* _UAPI_ASM_X86_E820_H */
arch/x86/include/uapi/asm/ldt.h +2 -2
@@ -12,7 +12,7 @@/* The size of each LDT entry. */ #define LDT_ENTRY_SIZE 8 -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__/* * Note on 64bit base and limit is ignored and you cannot set DS/ES/CS * not to the default values if you still want to do syscalls. This
@@ -44,5 +44,5 @@ struct user_desc {#define MODIFY_LDT_CONTENTS_STACK 1#define MODIFY_LDT_CONTENTS_CODE 2 -#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ #endif /* _ASM_X86_LDT_H */
arch/x86/include/uapi/asm/msr.h +2 -2
@@ -2,7 +2,7 @@#ifndef _UAPI_ASM_X86_MSR_H#define _UAPI_ASM_X86_MSR_H -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <linux/types.h> #include <linux/ioctl.h>
@@ -10,5 +10,5 @@#define X86_IOC_RDMSR_REGS _IOWR('c', 0xA0, __u32[8])#define X86_IOC_WRMSR_REGS _IOWR('c', 0xA1, __u32[8]) -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* _UAPI_ASM_X86_MSR_H */
arch/x86/include/uapi/asm/ptrace-abi.h +3 -3
@@ -25,7 +25,7 @@#else /* __i386__ */ -#if defined(__ASSEMBLY__) || defined(__FRAME_OFFSETS) +#if defined(__ASSEMBLER__) || defined(__FRAME_OFFSETS)/* * C ABI says these regs are callee-preserved. They aren't saved on kernel entry * unless syscall needs a complete, fully filled "struct pt_regs".
@@ -57,7 +57,7 @@#define EFLAGS 144#define RSP 152#define SS 160 -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ /* top of stack page */ #define FRAME_SIZE 168
@@ -87,7 +87,7 @@#define PTRACE_SINGLEBLOCK 33/* resume execution until next branch */ -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <linux/types.h> #endif
arch/x86/include/uapi/asm/ptrace.h +2 -2
@@ -7,7 +7,7 @@#include <asm/processor-flags.h> -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#ifdef __i386__/* this struct defines the way the registers are stored on the
@@ -81,6 +81,6 @@ struct pt_regs { -#endif /* !__ASSEMBLY__ */ +#endif /* !__ASSEMBLER__ */ #endif /* _UAPI_ASM_X86_PTRACE_H */
arch/x86/include/uapi/asm/setup_data.h +2 -2
@@ -18,7 +18,7 @@#define SETUP_INDIRECT (1<<31)#define SETUP_TYPE_MAX (SETUP_ENUM_MAX | SETUP_INDIRECT) -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <linux/types.h>
@@ -78,6 +78,6 @@ struct ima_setup_data {__u64 size; } __attribute__((packed)); -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* _UAPI_ASM_X86_SETUP_DATA_H */
arch/x86/include/uapi/asm/signal.h +4 -4
@@ -2,7 +2,7 @@#ifndef _UAPI_ASM_X86_SIGNAL_H#define _UAPI_ASM_X86_SIGNAL_H -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__#include <linux/types.h> #include <linux/compiler.h>
@@ -16,7 +16,7 @@ struct siginfo;typedef unsigned long sigset_t ;#endif /* __KERNEL__ */ -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #define SIGHUP 1
@@ -68,7 +68,7 @@ typedef unsigned long sigset_t;#include <asm-generic/signal-defs.h> -#ifndef __ASSEMBLY__ +#ifndef __ASSEMBLER__# ifndef __KERNEL__
@@ -106,6 +106,6 @@ typedef struct sigaltstack {__kernel_size_t ss_size; } stack_t; -#endif /* __ASSEMBLY__ */ +#endif /* __ASSEMBLER__ */ #endif /* _UAPI_ASM_X86_SIGNAL_H */
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 126/783 x86/stackprotector/64: Only export __ref_stack_chk_guard on CONFIG_SMP
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ingo Molnar <[email protected]>
[ Upstream commit 91d5451d97ce35cbd510277fa3b7abf9caa4e34d ]
The __ref_stack_chk_guard symbol doesn't exist on UP:
<stdin>:4:15: error: ‘__ref_stack_chk_guard’ undeclared here (not in a function)
Fix the #ifdef around the entry.S export.
--- arch/x86/entry/entry.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/x86/entry/entry.S +1 -1
@@ -63,7 +63,7 @@ THUNK warn_thunk_thunk, __warn_thunk * entirely in the C code, and use an alias emitted by the linker script * instead. */ -#ifdef CONFIG_STACKPROTECTOR +#if defined(CONFIG_STACKPROTECTOR) && defined(CONFIG_SMP) EXPORT_SYMBOL(__ref_stack_chk_guard); #endif #endif
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 127/783 x86/smpboot: Fix INIT delay assignment for extended Intel Families
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sohil Mehta <[email protected]>
[ Upstream commit 7a2ad752746bfb13e89a83984ecc52a48bae4969 ]
Some old crusty CPUs need an extra delay that slows down booting. See the comment above 'init_udelay' for details. Newer CPUs don't need the delay.
Right now, for Intel, Family 6 and only Family 6 skips the delay. That leaves out both the Family 15 (Pentium 4s) and brand new Family 18/19 models.
The omission of Family 15 (Pentium 4s) seems like an oversight and 18/19 do not need the delay.
Skip the delay on all Intel processors Family 6 and beyond.
--- arch/x86/kernel/smpboot.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
arch/x86/kernel/smpboot.c +3 -3
@@ -676,9 +676,9 @@ static void __init smp_quirk_init_udelay(void)return ;/* if modern processor, use no delay */ -if (((boot_cpu_data.x86_vendor ==X86_VENDOR_INTEL ) && (boot_cpu_data.x86 ==6 )) || - ((boot_cpu_data.x86_vendor ==X86_VENDOR_HYGON ) && (boot_cpu_data.x86 >=0x18 )) || - ((boot_cpu_data.x86_vendor ==X86_VENDOR_AMD ) && (boot_cpu_data.x86 >=0xF ))) { +if ((boot_cpu_data.x86_vendor ==X86_VENDOR_INTEL && boot_cpu_data.x86_vfm >=INTEL_PENTIUM_PRO ) || + (boot_cpu_data.x86_vendor ==X86_VENDOR_HYGON && boot_cpu_data.x86 >=0x18 ) || + (boot_cpu_data.x86_vendor ==X86_VENDOR_AMD && boot_cpu_data.x86 >=0xF )) { init_udelay =0 ;return ; }
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 128/783 x86/microcode: Update the Intel processor flag scan check
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sohil Mehta <[email protected]>
[ Upstream commit 7e6b0a2e4152f4046af95eeb46f8b4f9b2a7398d ]
The Family model check to read the processor flag MSR is misleading and potentially incorrect. It doesn't consider Family while comparing the model number. The original check did have a Family number but it got lost/moved during refactoring.
intel_collect_cpu_info() is called through multiple paths such as early initialization, CPU hotplug as well as IFS image load. Some of these flows would be error prone due to the ambiguous check.
Correct the processor flag scan check to use a Family number and update it to a VFM based one to make it more readable.
--- arch/x86/include/asm/intel-family.h | 1 + arch/x86/kernel/cpu/microcode/intel.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-)
arch/x86/include/asm/intel-family.h +1 -0
@@ -46,6 +46,7 @@#define INTEL_ANY IFM(X86_FAMILY_ANY, X86_MODEL_ANY)#define INTEL_PENTIUM_PRO IFM(6, 0x01) +#define INTEL_PENTIUM_III_DESCHUTES IFM(6, 0x05)#define INTEL_CORE_YONAH IFM(6, 0x0E)
arch/x86/kernel/cpu/microcode/intel.c +1 -1
@@ -74,7 +74,7 @@ void intel_collect_cpu_info(struct cpu_signature *sig) sig->pf =0 ; sig->rev =intel_get_microcode_revision (); -if (x86_model (sig->sig) >=5 ||x86_family (sig->sig) >6 ) { +if (IFM (x86_family (sig->sig),x86_model (sig->sig)) >=INTEL_PENTIUM_III_DESCHUTES ) {unsigned int val[2 ];/* get processor flags from MSR 0x17 */
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 129/783 x86/amd_node: Add SMN offsets to exclusive region access
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mario Limonciello <[email protected]>
[ Upstream commit 83518453074d1f3eadbf7e61652b608a60087317 ]
Offsets 0x60 and 0x64 are used internally by kernel drivers that call the amd_smn_read() and amd_smn_write() functions. If userspace accesses the regions at the same time as the kernel it may cause malfunctions in drivers using the offsets.
Add these offsets to the exclusions so that the kernel is tainted if a non locked down userspace tries to access them.
--- arch/x86/kernel/amd_node.c | 41 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+)
arch/x86/kernel/amd_node.c +41 -0
@@ -93,6 +93,7 @@ static struct pci_dev **amd_roots;/* Protect the PCI config register pairs used for SMN. */ static DEFINE_MUTEX (smn_mutex); +static bool smn_exclusive;#define SMN_INDEX_OFFSET 0x60#define SMN_DATA_OFFSET 0x64
@@ -149,6 +150,9 @@ static int __amd_smn_rw(u8 i_off, u8 d_off, u16 node, u32 address, u32 *value, bif (!root)return err; +if (!smn_exclusive) +return err; +guard (mutex)(&smn_mutex); err =pci_write_config_dword (root, i_off, address);
@@ -202,6 +206,39 @@ static int amd_cache_roots(void)return 0 ; } +static int reserve_root_config_spaces (void ) +{ +struct pci_dev *root =NULL ; +struct pci_bus *bus =NULL ; + +while ((bus =pci_find_next_bus (bus))) { +/* Root device is Device 0 Function 0 on each Primary Bus. */ + root =pci_get_slot (bus,0 ); +if (!root) +continue ; + +if (root->vendor !=PCI_VENDOR_ID_AMD && + root->vendor !=PCI_VENDOR_ID_HYGON ) +continue ; + +pci_dbg (root,"Reserving PCI config space\n" ); + +/* +* There are a few SMN index/data pairs and other registers +* that shouldn't be accessed by user space. +* So reserve the entire PCI config space for simplicity rather +* than covering specific registers piecemeal. +*/ +if (!pci_request_config_region_exclusive (root,0 ,PCI_CFG_SPACE_SIZE ,NULL )) { +pci_err (root,"Failed to reserve config space\n" ); +return -EEXIST ; + } + } + + smn_exclusive = true; +return 0 ; +} +static int __init amd_smn_init (void ) {int err;
@@ -218,6 +255,10 @@ static int __init amd_smn_init(void)if (err)return err; + err =reserve_root_config_spaces (); +if (err) +return err; +return 0 ; }
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 130/783 x86/mm: Check return value from memblock_phys_alloc_range()
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Philip Redkin <[email protected]>
[ Upstream commit 631ca8909fd5c62b9fda9edda93924311a78a9c4 ]
At least with CONFIG_PHYSICAL_START=0x100000, if there is < 4 MiB of contiguous free memory available at this point, the kernel will crash and burn because memblock_phys_alloc_range() returns 0 on failure, which leads memblock_phys_free() to throw the first 4 MiB of physical memory to the wolves.
At a minimum it should fail gracefully with a meaningful diagnostic, but in fact everything seems to work fine without the weird reserve allocation.
--- arch/x86/mm/init.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
arch/x86/mm/init.c +7 -2
@@ -645,8 +645,13 @@ static void __init memory_map_top_down(unsigned long map_start,*/ addr =memblock_phys_alloc_range (PMD_SIZE ,PMD_SIZE , map_start, map_end); -memblock_phys_free (addr,PMD_SIZE ); - real_end = addr +PMD_SIZE ; +if (!addr) { +pr_warn ("Failed to release memory for alloc_low_pages()" ); + real_end =max (map_start,ALIGN_DOWN (map_end,PMD_SIZE )); + }else { +memblock_phys_free (addr,PMD_SIZE ); + real_end = addr +PMD_SIZE ; + }/* step_size need to be small so pgt_buf from BRK could cover it */ step_size =PMD_SIZE ;
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 131/783 i2c: qup: Vote for interconnect bandwidth to DRAM
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stephan Gerhold <[email protected]>
[ Upstream commit d4f35233a6345f62637463ef6e0708f44ffaa583 ]
When the I2C QUP controller is used together with a DMA engine it needs to vote for the interconnect path to the DRAM. Otherwise it may be unable to access the memory quickly enough.
The requested peak bandwidth is dependent on the I2C core clock.
To avoid sending votes too often the bandwidth is always requested when a DMA transfer starts, but dropped only on runtime suspend. Runtime suspend should only happen if no transfer is active. After resumption we can defer the next vote until the first DMA transfer actually happens.
The implementation is largely identical to the one introduced for spi-qup in commit ecdaa9473019 ("spi: qup: Vote for interconnect bandwidth to DRAM") since both drivers represent the same hardware block.
--- drivers/i2c/busses/i2c-qup.c | 36 ++++++++++++++++++++++++++++++++++++ 1 file changed, 36 insertions(+)
drivers/i2c/busses/i2c-qup.c +36 -0
@@ -14,6 +14,7 @@#include <linux/dma-mapping.h> #include <linux/err.h> #include <linux/i2c.h> +#include <linux/interconnect.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/module.h>
@@ -150,6 +151,8 @@/* TAG length for DATA READ in RX FIFO */ #define READ_RX_TAGS_LEN 2 +#define QUP_BUS_WIDTH 8 +static unsigned int scl_freq;module_param_named (scl_freq, scl_freq, uint,0444 );MODULE_PARM_DESC (scl_freq,"SCL frequency override" );
@@ -227,6 +230,7 @@ struct qup_i2c_dev {int irq;struct clk *clk;struct clk *pclk; +struct icc_path *icc_path;struct i2c_adapter adap;int clk_ctl;
@@ -255,6 +259,10 @@ struct qup_i2c_dev {/* To configure when bus is in run state */ u32 config_run; +/* bandwidth votes */ +u32 src_clk_freq; +u32 cur_bw_clk_freq; +/* dma parameters */ bool is_dma;/* To check if the current transfer is using DMA */
@@ -453,6 +461,23 @@ static int qup_i2c_bus_active(struct qup_i2c_dev *qup, int len)return ret; } +static int qup_i2c_vote_bw (struct qup_i2c_dev *qup,u32 clk_freq) +{ +u32 needed_peak_bw; +int ret; + +if (qup->cur_bw_clk_freq == clk_freq) +return 0 ; + + needed_peak_bw =Bps_to_icc (clk_freq *QUP_BUS_WIDTH ); + ret =icc_set_bw (qup->icc_path,0 , needed_peak_bw); +if (ret) +return ret; + + qup->cur_bw_clk_freq = clk_freq; +return 0 ; +} +static void qup_i2c_write_tx_fifo_v1 (struct qup_i2c_dev *qup) {struct qup_i2c_block *blk = &qup->blk;
@@ -838,6 +863,10 @@ static int qup_i2c_bam_xfer(struct i2c_adapter *adap, struct i2c_msg *msg,int ret =0 ;int idx =0 ; + ret =qup_i2c_vote_bw (qup, qup->src_clk_freq); +if (ret) +return ret; +enable_irq (qup->irq); ret =qup_i2c_req_dma (qup);
@@ -1643,6 +1672,7 @@ static void qup_i2c_disable_clocks(struct qup_i2c_dev *qup) config =readl (qup->base +QUP_CONFIG ); config |=QUP_CLOCK_AUTO_GATE ;writel (config, qup->base +QUP_CONFIG ); +qup_i2c_vote_bw (qup,0 );clk_disable_unprepare (qup->pclk); }
@@ -1743,6 +1773,11 @@ static int qup_i2c_probe(struct platform_device *pdev) goto fail_dma; } qup->is_dma = true; + + qup->icc_path =devm_of_icc_get (&pdev->dev,NULL ); +if (IS_ERR (qup->icc_path)) +return dev_err_probe (&pdev->dev,PTR_ERR (qup->icc_path), +"failed to get interconnect path\n" ); } nodma:
@@ -1791,6 +1826,7 @@ static int qup_i2c_probe(struct platform_device *pdev)qup_i2c_enable_clocks (qup); src_clk_freq =clk_get_rate (qup->clk); } + qup->src_clk_freq = src_clk_freq;/* * Bootloaders might leave a pending interrupt on certain QUP's,
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 132/783 i2c: amd-asf: Set cmd variable when encountering an error
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shyam Sundar S K <[email protected]>
[ Upstream commit b719afaa1e5d88a1b51d76adf344ff4a48efdb45 ]
In the event of ASF error during the transfer, update the cmd and exit the process, as data processing is not performed when a command fails.
--- drivers/i2c/busses/i2c-amd-asf-plat.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/i2c/busses/i2c-amd-asf-plat.c +1 -1
@@ -69,7 +69,7 @@ static void amd_asf_process_target(struct work_struct *work)/* Check if no error bits are set in target status register */ if (reg &ASF_ERROR_STATUS ) {/* Set bank as full */ - cmd =0 ; + cmd =1 ; reg |=GENMASK (3 ,2 );outb_p (reg,ASFDATABNKSEL ); }else {
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 133/783 i2c: pxa: fix call balance of i2c->clk handling routines
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vitalii Mordan <[email protected]>
[ Upstream commit be7113d2e2a6f20cbee99c98d261a1fd6fd7b549 ]
If the clock i2c->clk was not enabled in i2c_pxa_probe(), it should not be disabled in any path.
Found by Linux Verification Center (linuxtesting.org) with Klever.
--- drivers/i2c/busses/i2c-pxa.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/i2c/busses/i2c-pxa.c +4 -1
@@ -1503,7 +1503,10 @@ static int i2c_pxa_probe(struct platform_device *dev) i2c->adap.name); } -clk_prepare_enable (i2c->clk); + ret =clk_prepare_enable (i2c->clk); +if (ret) +return dev_err_probe (&dev->dev, ret, +"failed to enable clock\n" );if (i2c->use_pio) { i2c->adap.algo = &i2c_pxa_pio_algorithm;
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 134/783 btrfs: make btrfs_discard_workfn() block_group ref explicit
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Boris Burkov <[email protected]>
[ Upstream commit 895c6721d310c036dcfebb5ab845822229fa35eb ]
Currently, the async discard machinery owns a ref to the block_group when the block_group is queued on a discard list. However, to handle races with discard cancellation and the discard workfn, we have a specific logic to detect that the block_group is *currently* running in the workfn, to protect the workfn's usage amidst cancellation.
As far as I can tell, this doesn't have any overt bugs (though finish_discard_pass() and remove_from_discard_list() racing can have a surprising outcome for the caller of remove_from_discard_list() in that it is again added at the end).
But it is needlessly complicated to rely on locking and the nullity of discard_ctl->block_group. Simplify this significantly by just taking a refcount while we are in the workfn and unconditionally drop it in both the remove and workfn paths, regardless of if they race.
--- fs/btrfs/discard.c | 34 ++++++++++++++++------------------ 1 file changed, 16 insertions(+), 18 deletions(-)
fs/btrfs/discard.c +16 -18
@@ -168,13 +168,7 @@ static bool remove_from_discard_list(struct btrfs_discard_ctl *discard_ctl, block_group->discard_eligible_time =0 ; queued = !list_empty (&block_group->discard_list);list_del_init (&block_group->discard_list); -/* -* If the block group is currently running in the discard workfn, we -* don't want to deref it, since it's still being used by the workfn. -* The workfn will notice this case and deref the block group when it is -* finished. -*/ -if (queued && !running) +if (queued)btrfs_put_block_group (block_group);spin_unlock (&discard_ctl->lock);
@@ -273,9 +267,10 @@ static struct btrfs_block_group *peek_discard_list( block_group->discard_cursor = block_group->start; block_group->discard_state =BTRFS_DISCARD_EXTENTS ; } - discard_ctl->block_group = block_group; }if (block_group) { +btrfs_get_block_group (block_group); + discard_ctl->block_group = block_group; *discard_state = block_group->discard_state; *discard_index = block_group->discard_index; }
@@ -506,9 +501,20 @@ static void btrfs_discard_workfn(struct work_struct *work) block_group =peek_discard_list (discard_ctl, &discard_state, &discard_index, now); -if (!block_group || !btrfs_run_discard_work (discard_ctl)) +if (!block_group)return ; +if (!btrfs_run_discard_work (discard_ctl)) { +spin_lock (&discard_ctl->lock); +btrfs_put_block_group (block_group); + discard_ctl->block_group =NULL ; +spin_unlock (&discard_ctl->lock); +return ; + }if (now < block_group->discard_eligible_time) { +spin_lock (&discard_ctl->lock); +btrfs_put_block_group (block_group); + discard_ctl->block_group =NULL ; +spin_unlock (&discard_ctl->lock);btrfs_discard_schedule_work (discard_ctl, false);return ; }
@@ -560,15 +566,7 @@ static void btrfs_discard_workfn(struct work_struct *work)spin_lock (&discard_ctl->lock); discard_ctl->prev_discard = trimmed; discard_ctl->prev_discard_time = now; -/* -* If the block group was removed from the discard list while it was -* running in this workfn, then we didn't deref it, since this function -* still owned that reference. But we set the discard_ctl->block_group -* back to NULL, so we can use that condition to know that now we need -* to deref the block_group. -*/ -if (discard_ctl->block_group ==NULL ) -btrfs_put_block_group (block_group); +btrfs_put_block_group (block_group); discard_ctl->block_group =NULL ;__btrfs_discard_schedule_work (discard_ctl, now, false);spin_unlock (&discard_ctl->lock);
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 135/783 btrfs: avoid linker error in btrfs_find_create_tree_block()
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mark Harmstone <[email protected]>
[ Upstream commit 7ef3cbf17d2734ca66c4ed8573be45f4e461e7ee ]
The inline function btrfs_is_testing() is hardcoded to return 0 if CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set. Currently we're relying on the compiler optimizing out the call to alloc_test_extent_buffer() in btrfs_find_create_tree_block(), as it's not been defined (it's behind an
#ifdef).
Add a stub version of alloc_test_extent_buffer() to avoid linker errors on non-standard optimization levels. This problem was seen on GCC 14 with -O0 and is helps to see symbols that would be otherwise optimized out.
--- fs/btrfs/extent_io.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
fs/btrfs/extent_io.c +5 -2
@@ -2842,10 +2842,10 @@ struct extent_buffer *find_extent_buffer(struct btrfs_fs_info *fs_info,return eb; } -#ifdef CONFIG_BTRFS_FS_RUN_SANITY_TESTS struct extent_buffer *alloc_test_extent_buffer (struct btrfs_fs_info *fs_info,u64 start) { +#ifdef CONFIG_BTRFS_FS_RUN_SANITY_TESTS struct extent_buffer *eb, *exists =NULL ;int ret;
@@ -2881,8 +2881,11 @@ struct extent_buffer *alloc_test_extent_buffer(struct btrfs_fs_info *fs_info, free_eb:btrfs_release_extent_buffer (eb);return exists; -} +#else +/* Stub to avoid linker error when compiled with optimizations turned off. */ +return NULL ;#endif +}static struct extent_buffer *grab_extent_buffer (struct btrfs_fs_info *fs_info,struct folio *folio)
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 136/783 btrfs: run btrfs_error_commit_super() early
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Qu Wenruo <[email protected]>
[ Upstream commit df94a342efb451deb0e32b495d1d6cd4bb3a1648 ]
[BUG]
Even after all the error fixes related the "ASSERT(list_empty(&fs_info->delayed_iputs));" in close_ctree(), I can still hit it reliably with my experimental 2K block size.
[CAUSE]
In my case, all the error is triggered after the fs is already in error status.
I find the following call trace to be the cause of race:
Main thread | endio_write_workers
---------------------------------------------+---------------------------
close_ctree() | |- btrfs_error_commit_super() | | |- btrfs_cleanup_transaction() | | | |- btrfs_destroy_all_ordered_extents() | | | |- btrfs_wait_ordered_roots() | | |- btrfs_run_delayed_iputs() | | | btrfs_finish_ordered_io() | | |- btrfs_put_ordered_extent() | | |- btrfs_add_delayed_iput() |- ASSERT(list_empty(delayed_iputs)) |
!!! Triggered !!!
The root cause is that, btrfs_wait_ordered_roots() only wait for ordered extents to finish their IOs, not to wait for them to finish and removed.
[FIX]
Since btrfs_error_commit_super() will flush and wait for all ordered extents, it should be executed early, before we start flushing the workqueues.
And since btrfs_error_commit_super() now runs early, there is no need to run btrfs_run_delayed_iputs() inside it, so just remove the btrfs_run_delayed_iputs() call from btrfs_error_commit_super().
--- fs/btrfs/disk-io.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-)
fs/btrfs/disk-io.c +8 -7
@@ -4328,6 +4328,14 @@ void __cold close_ctree(struct btrfs_fs_info *fs_info)/* clear out the rbtree of defraggable inodes */ btrfs_cleanup_defrag_inodes (fs_info); +/* +* Handle the error fs first, as it will flush and wait for all ordered +* extents. This will generate delayed iputs, thus we want to handle +* it first. +*/ +if (unlikely (BTRFS_FS_ERROR (fs_info))) +btrfs_error_commit_super (fs_info); +/* * Wait for any fixup workers to complete. * If we don't wait for them here and they are still running by the time
@@ -4418,9 +4426,6 @@ void __cold close_ctree(struct btrfs_fs_info *fs_info)btrfs_err (fs_info,"commit super ret %d" , ret); } -if (BTRFS_FS_ERROR (fs_info)) -btrfs_error_commit_super (fs_info); -kthread_stop (fs_info->transaction_kthread);kthread_stop (fs_info->cleaner_kthread);
@@ -4543,10 +4548,6 @@ static void btrfs_error_commit_super(struct btrfs_fs_info *fs_info)/* cleanup FS via transaction */ btrfs_cleanup_transaction (fs_info); -mutex_lock (&fs_info->cleaner_mutex); -btrfs_run_delayed_iputs (fs_info); -mutex_unlock (&fs_info->cleaner_mutex); -down_write (&fs_info->cleanup_work_sem);up_write (&fs_info->cleanup_work_sem); }
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 137/783 btrfs: fix non-empty delayed iputs list on unmount due to async workers
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Filipe Manana <[email protected]>
[ Upstream commit cda76788f8b0f7de3171100e3164ec1ce702292e ]
At close_ctree() after we have ran delayed iputs either explicitly through calling btrfs_run_delayed_iputs() or later during the call to btrfs_commit_super() or btrfs_error_commit_super(), we assert that the delayed iputs list is empty.
We have (another) race where this assertion might fail because we have queued an async write into the fs_info->workers workqueue. Here's how it happens:
1) We are submitting a data bio for an inode that is not the data relocation inode, so we call btrfs_wq_submit_bio();
2) btrfs_wq_submit_bio() submits a work for the fs_info->workers queue that will run run_one_async_done();
3) We enter close_ctree(), flush several work queues except fs_info->workers, explicitly run delayed iputs with a call to btrfs_run_delayed_iputs() and then again shortly after by calling btrfs_commit_super() or btrfs_error_commit_super(), which also run delayed iputs;
4) run_one_async_done() is executed in the work queue, and because there was an IO error (bio->bi_status is not 0) it calls btrfs_bio_end_io(), which drops the final reference on the associated ordered extent by calling btrfs_put_ordered_extent() - and that adds a delayed iput for the inode;
5) At close_ctree() we find that after stopping the cleaner and transaction kthreads the delayed iputs list is not empty, failing the following assertion:
ASSERT(list_empty(&fs_info->delayed_iputs));
Fix this by flushing the fs_info->workers workqueue before running delayed iputs at close_ctree().
David reported this when running generic/648, which exercises IO error paths by using the DM error table.
--- fs/btrfs/disk-io.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
fs/btrfs/disk-io.c +13 -0
@@ -4356,6 +4356,19 @@ void __cold close_ctree(struct btrfs_fs_info *fs_info)*/ btrfs_flush_workqueue (fs_info->delalloc_workers); +/* +* We can have ordered extents getting their last reference dropped from +* the fs_info->workers queue because for async writes for data bios we +* queue a work for that queue, at btrfs_wq_submit_bio(), that runs +* run_one_async_done() which calls btrfs_bio_end_io() in case the bio +* has an error, and that later function can do the final +* btrfs_put_ordered_extent() on the ordered extent attached to the bio, +* which adds a delayed iput for the inode. So we must flush the queue +* so that we don't have delayed iputs after committing the current +* transaction below and stopping the cleaner and transaction kthreads. +*/ +btrfs_flush_workqueue (fs_info->workers); +/* * When finishing a compressed write bio we schedule a work queue item * to finish an ordered extent - btrfs_finish_compressed_write_work()
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 138/783 btrfs: get zone unusable bytes while holding lock at btrfs_reclaim_bgs_work()
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Filipe Manana <[email protected]>
[ Upstream commit 1283b8c125a83bf7a7dbe90c33d3472b6d7bf612 ]
At btrfs_reclaim_bgs_work(), we are grabbing a block group's zone unusable bytes while not under the protection of the block group's spinlock, so this can trigger race reports from KCSAN (or similar tools) since that field is typically updated while holding the lock, such as at __btrfs_add_free_space_zoned() for example.
Fix this by grabbing the zone unusable bytes while we are still in the critical section holding the block group's spinlock, which is right above where we are currently grabbing it.
--- fs/btrfs/block-group.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-)
fs/btrfs/block-group.c +11 -7
@@ -1888,6 +1888,17 @@ void btrfs_reclaim_bgs_work(struct work_struct *work)up_write (&space_info->groups_sem); goto next; } + +/* +* Cache the zone_unusable value before turning the block group +* to read only. As soon as the block group is read only it's +* zone_unusable value gets moved to the block group's read-only +* bytes and isn't available for calculations anymore. We also +* cache it before unlocking the block group, to prevent races +* (reports from KCSAN and such tools) with tasks updating it. +*/ + zone_unusable = bg->zone_unusable; +spin_unlock (&bg->lock);spin_unlock (&space_info->lock);
@@ -1904,13 +1915,6 @@ void btrfs_reclaim_bgs_work(struct work_struct *work) goto next; } -/* -* Cache the zone_unusable value before turning the block group -* to read only. As soon as the blog group is read only it's -* zone_unusable value gets moved to the block group's read-only -* bytes and isn't available for calculations anymore. -*/ - zone_unusable = bg->zone_unusable; ret =inc_block_group_ro (bg,0 );up_write (&space_info->groups_sem);if (ret <0 )
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 139/783 btrfs: send: return -ENAMETOOLONG when attempting a path that is too long
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Filipe Manana <[email protected]>
[ Upstream commit a77749b3e21813566cea050bbb3414ae74562eba ]
When attempting to build a too long path we are currently returning -ENOMEM, which is very odd and misleading. So update fs_path_ensure_buf() to return -ENAMETOOLONG instead. Also, while at it, move the WARN_ON() into the if statement's expression, as it makes it clear what is being tested and also has the effect of adding 'unlikely' to the statement, which allows the compiler to generate better code as this condition is never expected to happen.
--- fs/btrfs/send.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
fs/btrfs/send.c +2 -4
@@ -487,10 +487,8 @@ static int fs_path_ensure_buf(struct fs_path *p, int len)if (p->buf_len >= len)return 0 ; -if (len >PATH_MAX ) { -WARN_ON (1 ); -return -ENOMEM ; - } +if (WARN_ON (len >PATH_MAX )) +return -ENAMETOOLONG ; path_len = p->end - p->start; old_buf_len = p->buf_len;
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 140/783 blk-cgroup: improve policy registration error handling
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chen Linxuan <[email protected]>
[ Upstream commit e1a0202c6bfda24002a3ae2115154fa90104c649 ]
This patch improve the returned error code of blkcg_policy_register().
1. Move the validation check for cpd/pd_alloc_fn and cpd/pd_free_fn function pairs to the start of blkcg_policy_register(). This ensures we immediately return -EINVAL if the function pairs are not correctly provided, rather than returning -ENOSPC after locking and unlocking mutexes unnecessarily.
Those locks should not contention any problems, as error of policy registration is a super cold path.
2. Return -ENOMEM when cpd_alloc_fn() failed.
--- block/blk-cgroup.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-)
block/blk-cgroup.c +12 -10
@@ -1727,27 +1727,27 @@ int blkcg_policy_register(struct blkcg_policy *pol)struct blkcg *blkcg;int i, ret; +/* +* Make sure cpd/pd_alloc_fn and cpd/pd_free_fn in pairs, and policy +* without pd_alloc_fn/pd_free_fn can't be activated. +*/ +if ((!pol->cpd_alloc_fn ^ !pol->cpd_free_fn) || + (!pol->pd_alloc_fn ^ !pol->pd_free_fn)) +return -EINVAL ; +mutex_lock (&blkcg_pol_register_mutex);mutex_lock (&blkcg_pol_mutex);/* find an empty slot */ - ret = -ENOSPC ;for (i =0 ; i <BLKCG_MAX_POLS ; i++)if (!blkcg_policy[i])break ;if (i >=BLKCG_MAX_POLS ) {pr_warn ("blkcg_policy_register: BLKCG_MAX_POLS too small\n" ); + ret = -ENOSPC ; goto err_unlock; } -/* -* Make sure cpd/pd_alloc_fn and cpd/pd_free_fn in pairs, and policy -* without pd_alloc_fn/pd_free_fn can't be activated. -*/ -if ((!pol->cpd_alloc_fn ^ !pol->cpd_free_fn) || - (!pol->pd_alloc_fn ^ !pol->pd_free_fn)) - goto err_unlock; -/* register @pol */ pol->plid = i; blkcg_policy[pol->plid] = pol;
@@ -1758,8 +1758,10 @@ int blkcg_policy_register(struct blkcg_policy *pol)struct blkcg_policy_data *cpd; cpd = pol->cpd_alloc_fn (GFP_KERNEL ); -if (!cpd) +if (!cpd) { + ret = -ENOMEM ; goto err_free_cpds; + } blkcg->cpd[pol->plid] = cpd; cpd->blkcg = blkcg;
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 141/783 drm/amdgpu: release xcp_mgr on exit
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Flora Cui <[email protected]>
[ Upstream commit b5aaa82e2b12feaaa6958f7fa0917ddcc03c24ee ]
Free on driver cleanup.
--- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +3 -0
@@ -4778,6 +4778,9 @@ void amdgpu_device_fini_sw(struct amdgpu_device *adev)kfree (adev->fru_info); adev->fru_info =NULL ; +kfree (adev->xcp_mgr); + adev->xcp_mgr =NULL ; + px =amdgpu_device_supports_px (adev_to_drm (adev)); if (px || (!dev_is_removable(&adev->pdev->dev) &&
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 142/783 drm/amd/display: Guard against setting dispclk low for dcn31x
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jing Zhou <[email protected]>
[ Upstream commit 9c2f4ae64bb6f6d83a54d88b9ee0f369cdbb9fa8 ]
[WHY]
We should never apply a minimum dispclk value while in prepare_bandwidth or while displays are active. This is always an optimizaiton for when all displays are disabled.
[HOW]
Defer dispclk optimization until safe_to_lower = true and display_count reaches 0.
Since 0 has a special value in this logic (ie. no dispclk required) we also need adjust the logic that clamps it for the actual request to PMFW.
--- .../dc/clk_mgr/dcn315/dcn315_clk_mgr.c | 20 +++++++++++-------- .../dc/clk_mgr/dcn316/dcn316_clk_mgr.c | 13 +++++++++--- 2 files changed, 22 insertions(+), 11 deletions(-)
drivers/gpu/drm/amd/display/dc/clk_mgr/dcn315/dcn315_clk_mgr.c +12 -8
@@ -130,7 +130,7 @@ static void dcn315_update_clocks(struct clk_mgr *clk_mgr_base,struct clk_mgr_internal *clk_mgr =TO_CLK_MGR_INTERNAL (clk_mgr_base);struct dc_clocks *new_clocks = &context->bw_ctx.bw.dcn.clk;struct dc *dc = clk_mgr_base->ctx->dc; -int display_count; +int display_count =0 ;bool update_dppclk = false;bool update_dispclk = false;bool dpp_clock_lowered = false;
@@ -204,15 +204,19 @@ static void dcn315_update_clocks(struct clk_mgr *clk_mgr_base, update_dppclk = true; } -if (should_set_clock (safe_to_lower, new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz)) { -/* No need to apply the w/a if we haven't taken over from bios yet */ -if (clk_mgr_base->clks.dispclk_khz) -dcn315_disable_otg_wa (clk_mgr_base, context, true); +if (should_set_clock (safe_to_lower, new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz) && + (new_clocks->dispclk_khz >0 || (safe_to_lower && display_count ==0 ))) { +int requested_dispclk_khz = new_clocks->dispclk_khz; +dcn315_disable_otg_wa (clk_mgr_base, context, true); + +/* Clamp the requested clock to PMFW based on their limit. */ +if (dc->debug.min_disp_clk_khz >0 && requested_dispclk_khz < dc->debug.min_disp_clk_khz) + requested_dispclk_khz = dc->debug.min_disp_clk_khz; + +dcn315_smu_set_dispclk (clk_mgr, requested_dispclk_khz); clk_mgr_base->clks.dispclk_khz = new_clocks->dispclk_khz; -dcn315_smu_set_dispclk (clk_mgr, clk_mgr_base->clks.dispclk_khz); -if (clk_mgr_base->clks.dispclk_khz) -dcn315_disable_otg_wa (clk_mgr_base, context, false); +dcn315_disable_otg_wa (clk_mgr_base, context, false); update_dispclk = true; }
drivers/gpu/drm/amd/display/dc/clk_mgr/dcn316/dcn316_clk_mgr.c +10 -3
@@ -140,7 +140,7 @@ static void dcn316_update_clocks(struct clk_mgr *clk_mgr_base,struct clk_mgr_internal *clk_mgr =TO_CLK_MGR_INTERNAL (clk_mgr_base);struct dc_clocks *new_clocks = &context->bw_ctx.bw.dcn.clk;struct dc *dc = clk_mgr_base->ctx->dc; -int display_count; +int display_count =0 ;bool update_dppclk = false;bool update_dispclk = false;bool dpp_clock_lowered = false;
@@ -211,11 +211,18 @@ static void dcn316_update_clocks(struct clk_mgr *clk_mgr_base, update_dppclk = true; } -if (should_set_clock (safe_to_lower, new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz)) { +if (should_set_clock (safe_to_lower, new_clocks->dispclk_khz, clk_mgr_base->clks.dispclk_khz) && + (new_clocks->dispclk_khz >0 || (safe_to_lower && display_count ==0 ))) { +int requested_dispclk_khz = new_clocks->dispclk_khz; +dcn316_disable_otg_wa (clk_mgr_base, context, safe_to_lower, true); +/* Clamp the requested clock to PMFW based on their limit. */ +if (dc->debug.min_disp_clk_khz >0 && requested_dispclk_khz < dc->debug.min_disp_clk_khz) + requested_dispclk_khz = dc->debug.min_disp_clk_khz; + +dcn316_smu_set_dispclk (clk_mgr, requested_dispclk_khz); clk_mgr_base->clks.dispclk_khz = new_clocks->dispclk_khz; -dcn316_smu_set_dispclk (clk_mgr, clk_mgr_base->clks.dispclk_khz);dcn316_disable_otg_wa (clk_mgr_base, context, safe_to_lower, false); update_dispclk = true;
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 143/783 drm/amdgpu: dont free conflicting apertures for non-display devices
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <[email protected]>
[ Upstream commit 9deacd6c55f1b31e5ab20db79df2e14ac480203c ]
PCI_CLASS_ACCELERATOR_PROCESSING devices won't ever be the sysfb, so there is no need to free conflicting apertures.
--- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c +11 -4
@@ -4370,10 +4370,17 @@ int amdgpu_device_init(struct amdgpu_device *adev,if (r)return r; -/* Get rid of things like offb */ - r =aperture_remove_conflicting_pci_devices (adev->pdev, amdgpu_kms_driver.name); -if (r) -return r; +/* +* No need to remove conflicting FBs for non-display class devices. +* This prevents the sysfb from being freed accidently. +*/ +if ((pdev->class >>8 ) ==PCI_CLASS_DISPLAY_VGA || + (pdev->class >>8 ) ==PCI_CLASS_DISPLAY_OTHER ) { +/* Get rid of things like offb */ + r =aperture_remove_conflicting_pci_devices (adev->pdev, amdgpu_kms_driver.name); +if (r) +return r; + }/* Enable TMZ based on IP_VERSION */ amdgpu_gmc_tmz_set (adev);
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 144/783 drm/amdgpu: adjust drm_firmware_drivers_only() handling
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <[email protected]>
[ Upstream commit e00e5c223878a60e391e5422d173c3382d378f87 ]
Move to probe so we can check the PCI device type and only apply the drm_firmware_drivers_only() check for PCI DISPLAY classes. Also add a module parameter to override the nomodeset kernel parameter as a workaround for platforms that have this hardcoded on their kernel command lines.
--- drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +14 -0
@@ -173,6 +173,7 @@ uint amdgpu_sdma_phase_quantum = 32;char *amdgpu_disable_cu;char *amdgpu_virtual_display;bool enforce_isolation; +int amdgpu_modeset =-1 ;/* Specifies the default granularity for SVM, used in buffer * migration and restoration of backing memory when handling
@@ -1033,6 +1034,13 @@ module_param_named(user_partt_mode, amdgpu_user_partt_mode, uint, 0444);module_param (enforce_isolation, bool,0444 );MODULE_PARM_DESC (enforce_isolation,"enforce process isolation between graphics and compute . enforce_isolation = on" ); +/** +* DOC: modeset (int) +* Override nomodeset (1 = override, -1 = auto). The default is -1 (auto). +*/ +MODULE_PARM_DESC (modeset,"Override nomodeset (1 = enable, -1 = auto)" ); +module_param_named (modeset, amdgpu_modeset, int,0444 ); +/** * DOC: seamless (int) * Seamless boot will keep the image on the screen during the boot process.
@@ -2244,6 +2252,12 @@ static int amdgpu_pci_probe(struct pci_dev *pdev,int ret, retry =0 , i;bool supports_atomic = false; +if ((pdev->class >>8 ) ==PCI_CLASS_DISPLAY_VGA || + (pdev->class >>8 ) ==PCI_CLASS_DISPLAY_OTHER ) { +if (drm_firmware_drivers_only () && amdgpu_modeset ==-1 ) +return -EINVAL ; + } +/* skip devices which are owned by radeon */ for (i =0 ; i <ARRAY_SIZE (amdgpu_unsupported_pciidlist); i++) {if (amdgpu_unsupported_pciidlist[i] == pdev->device)
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 145/783 i3c: master: svc: Fix missing STOP for master request
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Stanley Chu <[email protected]>
[ Upstream commit 0430bf9bc1ac068c8b8c540eb93e5751872efc51 ]
The controller driver nacked the master request but didn't emit a STOP to end the transaction. The driver shall refuse the unsupported requests and return the controller state to IDLE by emitting a STOP.
--- drivers/i3c/master/svc-i3c-master.c | 1 + 1 file changed, 1 insertion(+)
drivers/i3c/master/svc-i3c-master.c +1 -0
@@ -551,6 +551,7 @@ static void svc_i3c_master_ibi_work(struct work_struct *work)queue_work (master->base.wq, &master->hj_work);break ;case SVC_I3C_MSTATUS_IBITYPE_MASTER_REQUEST : +svc_i3c_master_emit_stop (master);default :break ; }
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 146/783 s390/tlb: Use mm_has_pgste() instead of mm_alloc_pgste()
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Heiko Carstens <[email protected]>
[ Upstream commit 9291ea091b29bb3e37c4b3416c7c1e49e472c7d5 ]
An mm has pgstes only after s390_enable_sie() has been called, while mm_alloc_pgste() may be always true (e.g. via sysctl setting).
Limit the calls to gmap_unlink() in pte_free_tlb() to those cases where there might be something to unlink.
--- arch/s390/include/asm/tlb.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/s390/include/asm/tlb.h +1 -1
@@ -84,7 +84,7 @@ static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, tlb->mm->context.flush_mm =1 ; tlb->freed_tables =1 ; tlb->cleared_pmds =1 ; -if (mm_alloc_pgste (tlb->mm)) +if (mm_has_pgste (tlb->mm))gmap_unlink (tlb->mm, (unsigned long *)pte, address);tlb_remove_ptdesc (tlb,virt_to_ptdesc (pte)); }
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 147/783 dlm: make tcp still work in multi-link env
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Heming Zhao <[email protected]>
[ Upstream commit 03d2b62208a336a3bb984b9465ef6d89a046ea22 ]
This patch bypasses multi-link errors in TCP mode, allowing dlm to operate on the first tcp link.
--- fs/dlm/lowcomms.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
fs/dlm/lowcomms.c +2 -2
@@ -1826,8 +1826,8 @@ static int dlm_tcp_listen_validate(void) {/* We don't support multi-homed hosts */ if (dlm_local_count >1 ) { -log_print ("TCP protocol can't handle multi-homed hosts, try SCTP" ); -return -EINVAL ; +log_print ("Detect multi-homed hosts but use only the first IP address." ); +log_print ("Try SCTP, if you want to enable multi-link." ); }return 0 ;
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 148/783 loop: move vfs_fsync() out of loop_update_dio()
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ming Lei <[email protected]>
[ Upstream commit 86947bdc28894520ed5aab0cf21b99ff0b659e07 ]
If vfs_flush() is called with queue frozen, the queue freeze lock may be connected with FS internal lock, and lockdep warning can be triggered because the queue freeze lock is connected with too many global or sub-system locks.
Fix the warning by moving vfs_fsync() out of loop_update_dio():
- vfs_fsync() is only needed when switching to dio
- only loop_change_fd() and loop_configure() may switch from buffered IO to direct IO, so call vfs_fsync() directly here. This way is safe because either loop is in unbound, or new file isn't attached
- for the other two cases of set_status and set_block_size, direct IO can only become off, so no need to call vfs_fsync()
--- drivers/block/loop.c | 20 ++++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-)
drivers/block/loop.c +14 -6
@@ -205,8 +205,6 @@ static bool lo_can_use_dio(struct loop_device *lo)*/ static inline void loop_update_dio (struct loop_device *lo) { -bool dio_in_use = lo->lo_flags &LO_FLAGS_DIRECT_IO ; -lockdep_assert_held (&lo->lo_mutex);WARN_ON_ONCE (lo->lo_state == Lo_bound && lo->lo_queue->mq_freeze_depth ==0 );
@@ -215,10 +213,6 @@ static inline void loop_update_dio(struct loop_device *lo) lo->lo_flags |=LO_FLAGS_DIRECT_IO ;if ((lo->lo_flags &LO_FLAGS_DIRECT_IO ) && !lo_can_use_dio (lo)) lo->lo_flags &= ~LO_FLAGS_DIRECT_IO ; - -/* flush dirty pages before starting to issue direct I/O */ -if ((lo->lo_flags &LO_FLAGS_DIRECT_IO ) && !dio_in_use) -vfs_fsync (lo->lo_backing_file,0 ); }/**
@@ -568,6 +562,13 @@ static int loop_change_fd(struct loop_device *lo, struct block_device *bdev,if (get_loop_size (lo, file) !=get_loop_size (lo, old_file)) goto out_err; +/* +* We might switch to direct I/O mode for the loop device, write back +* all dirty data the page cache now that so that the individual I/O +* operations don't have to do that. +*/ +vfs_fsync (file,0 ); +/* and ... switch */ disk_force_media_change (lo->lo_disk); memflags =blk_mq_freeze_queue (lo->lo_queue);
@@ -1046,6 +1047,13 @@ static int loop_configure(struct loop_device *lo, blk_mode_t mode,if (error) goto out_unlock; +/* +* We might switch to direct I/O mode for the loop device, write back +* all dirty data the page cache now that so that the individual I/O +* operations don't have to do that. +*/ +vfs_fsync (file,0 ); +loop_update_dio (lo);loop_sysfs_init (lo);
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 149/783 clocksource/drivers/timer-riscv: Stop stimecmp when cpu hotplug
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nick Hu <[email protected]>
[ Upstream commit 70c93b026ed07078e933583591aa9ca6701cd9da ]
Stop the timer when the cpu is going to be offline otherwise the timer interrupt may be pending while performing power-down.
--- drivers/clocksource/timer-riscv.c | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/clocksource/timer-riscv.c +6 -0
@@ -126,7 +126,13 @@ static int riscv_timer_starting_cpu(unsigned int cpu)static int riscv_timer_dying_cpu (unsigned int cpu) { +/* +* Stop the timer when the cpu is going to be offline otherwise +* the timer interrupt may be pending while performing power-down. +*/ +riscv_clock_event_stop ();disable_percpu_irq (riscv_clock_event_irq); +return 0 ; }
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 150/783 um: Store full CSGSFS and SS register from mcontext
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Benjamin Berg <[email protected]>
[ Upstream commit cef721e0d53d2b64f2ba177c63a0dfdd7c0daf17 ]
Doing this allows using registers as retrieved from an mcontext to be pushed to a process using PTRACE_SETREGS.
It is not entirely clear to me why CSGSFS was masked. Doing so creates issues when using the mcontext as process state in seccomp and simply copying the register appears to work perfectly fine for ptrace.
--- arch/x86/um/os-Linux/mcontext.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
arch/x86/um/os-Linux/mcontext.c +1 -2
@@ -27,7 +27,6 @@ void get_regs_from_mc(struct uml_pt_regs *regs, mcontext_t *mc)COPY (RIP );COPY2 (EFLAGS ,EFL );COPY2 (CS ,CSGSFS ); - regs->gp[CS /sizeof (unsigned long )] &=0xffff ; - regs->gp[CS /sizeof (unsigned long )] |=3 ; + regs->gp[SS /sizeof (unsigned long )] = mc->gregs[REG_CSGSFS ] >>48 ;#endif }
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 151/783 um: Update min_low_pfn to match changes in uml_reserved
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tiwei Bie <[email protected]>
[ Upstream commit e82cf3051e6193f61e03898f8dba035199064d36 ]
When uml_reserved is updated, min_low_pfn must also be updated accordingly. Otherwise, min_low_pfn will not accurately reflect the lowest available PFN.
--- arch/um/kernel/mem.c | 1 + 1 file changed, 1 insertion(+)
arch/um/kernel/mem.c +1 -0
@@ -66,6 +66,7 @@ void __init mem_init(void)map_memory (brk_end,__pa (brk_end), uml_reserved - brk_end,1 ,1 ,0 );memblock_free ((void *)brk_end, uml_reserved - brk_end); uml_reserved = brk_end; + min_low_pfn =PFN_UP (__pa (uml_reserved));/* this will put all low memory onto the freelists */ memblock_free_all ();
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 152/783 net/mlx5: Preserve rate settings when creating a rate node
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Carolina Jubran <[email protected]>
[ Upstream commit f88c349c75e3784a3f5463f5b403ff28dd823782 ]
Modify esw_qos_create_node_sched_elem() to receive max_rate and bw_share values while maintaining the previous configuration.
This change is essential for the upcoming patch that will modify rate nodes and requires the existing settings to be preserved unless explicitly changed.
--- drivers/net/ethernet/mellanox/mlx5/core/esw/qos.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)
drivers/net/ethernet/mellanox/mlx5/core/esw/qos.c +9 -4
@@ -305,8 +305,9 @@ static int esw_qos_set_node_min_rate(struct mlx5_esw_sched_node *node,return 0 ; } -static int esw_qos_create_node_sched_elem (struct mlx5_core_dev *dev,u32 parent_element_id, -u32 *tsar_ix) +static int +esw_qos_create_node_sched_elem (struct mlx5_core_dev *dev,u32 parent_element_id, +u32 max_rate,u32 bw_share,u32 *tsar_ix) {u32 tsar_ctx[MLX5_ST_SZ_DW (scheduling_context)] = {};void *attr;
@@ -323,6 +324,8 @@ static int esw_qos_create_node_sched_elem(struct mlx5_core_dev *dev, u32 parent_ SCHEDULING_CONTEXT_ELEMENT_TYPE_TSAR);MLX5_SET (scheduling_context, tsar_ctx, parent_element_id, parent_element_id); +MLX5_SET (scheduling_context, tsar_ctx, max_average_bw, max_rate); +MLX5_SET (scheduling_context, tsar_ctx, bw_share, bw_share); attr =MLX5_ADDR_OF (scheduling_context, tsar_ctx, element_attributes);MLX5_SET (tsar_element, attr, tsar_type,TSAR_ELEMENT_TSAR_TYPE_DWRR );
@@ -396,7 +399,8 @@ __esw_qos_create_vports_sched_node(struct mlx5_eswitch *esw, struct mlx5_esw_schu32 tsar_ix;int err; - err =esw_qos_create_node_sched_elem (esw->dev, esw->qos.root_tsar_ix, &tsar_ix); + err =esw_qos_create_node_sched_elem (esw->dev, esw->qos.root_tsar_ix,0 , +0 , &tsar_ix);if (err) {NL_SET_ERR_MSG_MOD (extack,"E-Switch create TSAR for node failed" );return ERR_PTR (err);
@@ -463,7 +467,8 @@ static int esw_qos_create(struct mlx5_eswitch *esw, struct netlink_ext_ack *extaif (!MLX5_CAP_GEN (dev, qos) || !MLX5_CAP_QOS (dev, esw_scheduling))return -EOPNOTSUPP ; - err =esw_qos_create_node_sched_elem (esw->dev,0 , &esw->qos.root_tsar_ix); + err =esw_qos_create_node_sched_elem (esw->dev,0 ,0 ,0 , + &esw->qos.root_tsar_ix);if (err) {esw_warn (dev,"E-Switch create root TSAR failed (%d)\n" , err);return err;
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 153/783 wifi: mwifiex: Fix HT40 bandwidth issue.
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jeff Chen <[email protected]>
[ Upstream commit 4fcfcbe457349267fe048524078e8970807c1a5b ]
This patch addresses an issue where, despite the AP supporting 40MHz bandwidth, the connection was limited to 20MHz. Without this fix, even if the access point supports 40MHz, the bandwidth after connection remains at 20MHz. This issue is not a regression.
--- drivers/net/wireless/marvell/mwifiex/11n.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
drivers/net/wireless/marvell/mwifiex/11n.c +4 -2
@@ -403,12 +403,14 @@ mwifiex_cmd_append_11n_tlv(struct mwifiex_private *priv,if (sband->ht_cap.cap &IEEE80211_HT_CAP_SUP_WIDTH_20_40 && bss_desc->bcn_ht_oper->ht_param & -IEEE80211_HT_PARAM_CHAN_WIDTH_ANY ) +IEEE80211_HT_PARAM_CHAN_WIDTH_ANY ) { + chan_list->chan_scan_param[0 ].radio_type |= +CHAN_BW_40MHZ <<2 ;SET_SECONDARYCHAN (chan_list->chan_scan_param[0 ]. radio_type, (bss_desc->bcn_ht_oper->ht_param &IEEE80211_HT_PARAM_CHA_SEC_OFFSET )); - + } *buffer +=struct_size (chan_list, chan_scan_param,1 ); ret_len +=struct_size (chan_list, chan_scan_param,1 ); }
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 154/783 bnxt_en: Query FW parameters when the CAPS_CHANGE bit is set
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: shantiprasad shettar <[email protected]>
[ Upstream commit a6c81e32aeacbfd530d576fa401edd506ec966ef ]
Newer FW can set the CAPS_CHANGE flag during ifup if some capabilities or configurations have changed. For example, the CoS queue configurations may have changed. Support this new flag by treating it almost like FW reset. The driver will essentially rediscover all features and capabilities, reconfigure all backing store context memory, reset everything to default, and reserve all resources.
--- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +6 -2
@@ -12104,6 +12104,7 @@ static int bnxt_hwrm_if_change(struct bnxt *bp, bool up)struct hwrm_func_drv_if_change_input *req;bool fw_reset = !bp->irq_tbl;bool resc_reinit = false; +bool caps_change = false;int rc, retry =0 ;u32 flags =0 ;
@@ -12159,8 +12160,11 @@ static int bnxt_hwrm_if_change(struct bnxt *bp, bool up)set_bit (BNXT_STATE_ABORT_ERR , &bp->state);return -ENODEV ; } -if (resc_reinit || fw_reset) { -if (fw_reset) { +if (flags &FUNC_DRV_IF_CHANGE_RESP_FLAGS_CAPS_CHANGE ) + caps_change = true; + +if (resc_reinit || fw_reset || caps_change) { +if (fw_reset || caps_change) {set_bit (BNXT_STATE_FW_RESET_DET , &bp->state);if (!test_bit (BNXT_STATE_IN_FW_RESET , &bp->state))bnxt_ulp_irq_stop (bp);
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 155/783 ixgbe: add support for thermal sensor event reception
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jedrzej Jagielski <[email protected]>
[ Upstream commit affead2d904e8f82c0b89e23b3835242eb8c3e1a ]
E610 NICs unlike the previous devices utilising ixgbe driver are notified in the case of overheating by the FW ACI event.
In event of overheat when threshold is exceeded, FW suspends all traffic and sends overtemp event to the driver. Then driver logs appropriate message and disables the adapter instance. The card remains in that state until the platform is rebooted.
This approach is a solution to the fact current version of the E610 FW doesn't support reading thermal sensor data by the SW. So give to user at least any info that overtemp event has occurred, without interface disappearing from the OS without any note.
--- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 4 ++++ drivers/net/ethernet/intel/ixgbe/ixgbe_type_e610.h | 3 +++ 2 files changed, 7 insertions(+)
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +4 -0
@@ -3185,6 +3185,10 @@ static void ixgbe_handle_fw_event(struct ixgbe_adapter *adapter)case ixgbe_aci_opc_get_link_status:ixgbe_handle_link_status_event (adapter, &event);break ; +case ixgbe_aci_opc_temp_tca_event: +e_crit (drv,"%s\n" , ixgbe_overheat_msg); +ixgbe_down (adapter); +break ;default :e_warn (hw,"unknown FW async event captured\n" );break ;
drivers/net/ethernet/intel/ixgbe/ixgbe_type_e610.h +3 -0
@@ -171,6 +171,9 @@ enum ixgbe_aci_opc { ixgbe_aci_opc_done_alt_write =0x0904 , ixgbe_aci_opc_clear_port_alt_write =0x0906 , +/* TCA Events */ + ixgbe_aci_opc_temp_tca_event =0x0C94 , +/* debug commands */ ixgbe_aci_opc_debug_dump_internals = 0xFF08,
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 156/783 riscv: Call secondary mmu notifier when flushing the tlb
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexandre Ghiti <[email protected]>
[ Upstream commit d9be2b9b60497a82aeceec3a98d8b37fdd2960f2 ]
This is required to allow the IOMMU driver to correctly flush its own TLB.
--- arch/riscv/mm/tlbflush.c | 37 ++++++++++++++++++++++--------------- 1 file changed, 22 insertions(+), 15 deletions(-)
arch/riscv/mm/tlbflush.c +22 -15
@@ -4,6 +4,7 @@#include <linux/smp.h> #include <linux/sched.h> #include <linux/hugetlb.h> +#include <linux/mmu_notifier.h> #include <asm/sbi.h> #include <asm/mmu_context.h>
@@ -78,10 +79,17 @@ static void __ipi_flush_tlb_range_asid(void *info)local_flush_tlb_range_asid (d->start, d->size, d->stride, d->asid); } -static void __flush_tlb_range (const struct cpumask *cmask,unsigned long asid, +static inline unsigned long get_mm_asid (struct mm_struct *mm) +{ +return mm ?cntx2asid (atomic_long_read (&mm->context.id)) :FLUSH_TLB_NO_ASID ; +} + +static void __flush_tlb_range (struct mm_struct *mm, +const struct cpumask *cmask,unsigned long start,unsigned long size,unsigned long stride) { +unsigned long asid =get_mm_asid (mm);unsigned int cpu;if (cpumask_empty (cmask))
@@ -105,30 +113,26 @@ static void __flush_tlb_range(const struct cpumask *cmask, unsigned long asid, }put_cpu (); -} -static inline unsigned long get_mm_asid (struct mm_struct *mm) -{ -return cntx2asid (atomic_long_read (&mm->context.id)); +if (mm) +mmu_notifier_arch_invalidate_secondary_tlbs (mm, start, start + size); }void flush_tlb_mm (struct mm_struct *mm) { -__flush_tlb_range (mm_cpumask (mm),get_mm_asid (mm), -0 ,FLUSH_TLB_MAX_SIZE ,PAGE_SIZE ); +__flush_tlb_range (mm,mm_cpumask (mm),0 ,FLUSH_TLB_MAX_SIZE ,PAGE_SIZE ); }void flush_tlb_mm_range (struct mm_struct *mm,unsigned long start,unsigned long end,unsigned int page_size) { -__flush_tlb_range (mm_cpumask (mm),get_mm_asid (mm), - start, end - start, page_size); +__flush_tlb_range (mm,mm_cpumask (mm), start, end - start, page_size); }void flush_tlb_page (struct vm_area_struct *vma,unsigned long addr) { -__flush_tlb_range (mm_cpumask (vma->vm_mm),get_mm_asid (vma->vm_mm), +__flush_tlb_range (vma->vm_mm,mm_cpumask (vma->vm_mm), addr,PAGE_SIZE ,PAGE_SIZE ); }
@@ -161,13 +165,13 @@ void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, } } -__flush_tlb_range (mm_cpumask (vma->vm_mm),get_mm_asid (vma->vm_mm), +__flush_tlb_range (vma->vm_mm,mm_cpumask (vma->vm_mm), start, end - start, stride_size); }void flush_tlb_kernel_range (unsigned long start,unsigned long end) { -__flush_tlb_range (cpu_online_mask,FLUSH_TLB_NO_ASID , +__flush_tlb_range (NULL , cpu_online_mask, start, end - start,PAGE_SIZE ); }
@@ -175,7 +179,7 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end)void flush_pmd_tlb_range (struct vm_area_struct *vma,unsigned long start,unsigned long end) { -__flush_tlb_range (mm_cpumask (vma->vm_mm),get_mm_asid (vma->vm_mm), +__flush_tlb_range (vma->vm_mm,mm_cpumask (vma->vm_mm), start, end - start,PMD_SIZE ); }#endif
@@ -189,7 +193,10 @@ void arch_tlbbatch_add_pending(struct arch_tlbflush_unmap_batch *batch, struct mm_struct *mm, unsigned long uaddr) { +unsigned long start = uaddr &PAGE_MASK ; +cpumask_or (&batch->cpumask, &batch->cpumask,mm_cpumask (mm)); +mmu_notifier_arch_invalidate_secondary_tlbs (mm, start, start +PAGE_SIZE ); }void arch_flush_tlb_batched_pending (struct mm_struct *mm)
@@ -199,7 +206,7 @@ void arch_flush_tlb_batched_pending(struct mm_struct *mm)void arch_tlbbatch_flush (struct arch_tlbflush_unmap_batch *batch) { -__flush_tlb_range (&batch->cpumask,FLUSH_TLB_NO_ASID ,0 , -FLUSH_TLB_MAX_SIZE ,PAGE_SIZE ); +__flush_tlb_range (NULL , &batch->cpumask, +0 ,FLUSH_TLB_MAX_SIZE ,PAGE_SIZE );cpumask_clear (&batch->cpumask); }
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 157/783 ext4: reorder capability check last
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Christian Göttsche <[email protected]>
[ Upstream commit 1b419c889c0767a5b66d0a6c566cae491f1cb0f7 ]
capable() calls refer to enabled LSMs whether to permit or deny the request. This is relevant in connection with SELinux, where a capability check results in a policy decision and by default a denial message on insufficient permission is issued.
It can lead to three undesired cases:
1. A denial message is generated, even in case the operation was an unprivileged one and thus the syscall succeeded, creating noise.
2. To avoid the noise from 1. the policy writer adds a rule to ignore those denial messages, hiding future syscalls, where the task performs an actual privileged operation, leading to hidden limited functionality of that task.
3. To avoid the noise from 1. the policy writer adds a rule to permit the task the requested capability, while it does not need it, violating the principle of least privilege.
--- fs/ext4/balloc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
fs/ext4/balloc.c +2 -2
@@ -649,8 +649,8 @@ static int ext4_has_free_clusters(struct ext4_sb_info *sbi,/* Hm, nope. Are (enough) root reserved clusters available? */ if (uid_eq (sbi->s_resuid,current_fsuid ()) || (!gid_eq (sbi->s_resgid,GLOBAL_ROOT_GID ) &&in_group_p (sbi->s_resgid)) || -capable (CAP_SYS_RESOURCE ) || - (flags &EXT4_MB_USE_ROOT_BLOCKS )) { + (flags &EXT4_MB_USE_ROOT_BLOCKS ) || +capable (CAP_SYS_RESOURCE )) {if (free_clusters >= (nclusters + dirty_clusters + resv_clusters))
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 158/783 hypfs_create_cpu_files(): add missing check for hypfs_mkdir() failure
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Al Viro <[email protected]>
[ Upstream commit 00cdfdcfa0806202aea56b02cedbf87ef1e75df8 ]
--- arch/s390/hypfs/hypfs_diag_fs.c | 2 ++ 1 file changed, 2 insertions(+)
arch/s390/hypfs/hypfs_diag_fs.c +2 -0
@@ -208,6 +208,8 @@ static int hypfs_create_cpu_files(struct dentry *cpus_dir, void *cpu_info)snprintf (buffer,TMP_SIZE ,"%d" ,cpu_info__cpu_addr (diag204_get_info_type (), cpu_info)); cpu_dir =hypfs_mkdir (cpus_dir, buffer); +if (IS_ERR (cpu_dir)) +return PTR_ERR (cpu_dir); rc =hypfs_create_u64 (cpu_dir,"mgmtime" ,cpu_info__acc_time (diag204_get_info_type (), cpu_info) -cpu_info__lp_time (diag204_get_info_type (), cpu_info));
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 159/783 scsi: st: Tighten the page format heuristics with MODE SELECT
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kai Mäkisara <[email protected]>
[ Upstream commit 8db816c6f176321e42254badd5c1a8df8bfcfdb4 ]
In the days when SCSI-2 was emerging, some drives did claim SCSI-2 but did not correctly implement it. The st driver first tries MODE SELECT with the page format bit set to set the block descriptor. If not successful, the non-page format is tried.
The test only tests the sense code and this triggers also from illegal parameter in the parameter list. The test is limited to "old" devices and made more strict to remove false alarms.
--- drivers/scsi/st.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/scsi/st.c +3 -1
@@ -3084,7 +3084,9 @@ static int st_int_ioctl(struct scsi_tape *STp, unsigned int cmd_in, unsigned lon cmd_in == MTSETDRVBUFFER || cmd_in == SET_DENS_AND_BLK) {if (cmdstatp->sense_hdr.sense_key ==ILLEGAL_REQUEST && - !(STp->use_pf &PF_TESTED )) { + cmdstatp->sense_hdr.asc ==0x24 && + (STp->device)->scsi_level <=SCSI_2 && + !(STp->use_pf &PF_TESTED )) {/* Try the other possible state of Page Format if not already tried */ STp->use_pf = (STp->use_pf ^USE_PF ) |PF_TESTED ;
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 160/783 scsi: st: ERASE does not change tape location
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kai Mäkisara <[email protected]>
[ Upstream commit ad77cebf97bd42c93ab4e3bffd09f2b905c1959a ]
The SCSI ERASE command erases from the current position onwards. Don't clear the position variables.
--- drivers/scsi/st.c | 1 - 1 file changed, 1 deletion(-)
drivers/scsi/st.c +0 -1
@@ -2897,7 +2897,6 @@ static int st_int_ioctl(struct scsi_tape *STp, unsigned int cmd_in, unsigned lon timeout = STp->long_timeout *8 ;DEBC_printk (STp,"Erasing tape.\n" ); - fileno = blkno = at_sm =0 ;break ;case MTSETBLK :/* Set block length */ case MTSETDENSITY :/* Set tape density */
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 161/783 vfio/pci: Handle INTx IRQ_NOTCONNECTED
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Williamson <[email protected]>
[ Upstream commit 860be250fc32de9cb24154bf21b4e36f40925707 ]
Some systems report INTx as not routed by setting pdev->irq to IRQ_NOTCONNECTED, resulting in a -ENOTCONN error when trying to setup eventfd signaling. Include this in the set of conditions for which the PIN register is virtualized to zero.
Additionally consolidate vfio_pci_get_irq_count() to use this virtualized value in reporting INTx support via ioctl and sanity checking ioctl paths since pdev->irq is re-used when the device is in MSI mode.
The combination of these results in both the config space of the device and the ioctl interface behaving as if the device does not support INTx.
--- drivers/vfio/pci/vfio_pci_config.c | 3 ++- drivers/vfio/pci/vfio_pci_core.c | 10 +--------- drivers/vfio/pci/vfio_pci_intrs.c | 2 +- 3 files changed, 4 insertions(+), 11 deletions(-)
drivers/vfio/pci/vfio_pci_config.c +2 -1
@@ -1814,7 +1814,8 @@ int vfio_config_init(struct vfio_pci_core_device *vdev)cpu_to_le16 (PCI_COMMAND_MEMORY ); } -if (!IS_ENABLED (CONFIG_VFIO_PCI_INTX ) || vdev->nointx) +if (!IS_ENABLED (CONFIG_VFIO_PCI_INTX ) || vdev->nointx || + vdev->pdev->irq ==IRQ_NOTCONNECTED ) vconfig[PCI_INTERRUPT_PIN ] =0 ; ret =vfio_cap_init (vdev);
drivers/vfio/pci/vfio_pci_core.c +1 -9
@@ -727,15 +727,7 @@ EXPORT_SYMBOL_GPL(vfio_pci_core_finish_enable);static int vfio_pci_get_irq_count (struct vfio_pci_core_device *vdev,int irq_type) {if (irq_type ==VFIO_PCI_INTX_IRQ_INDEX ) { -u8 pin; - -if (!IS_ENABLED (CONFIG_VFIO_PCI_INTX ) || - vdev->nointx || vdev->pdev->is_virtfn) -return 0 ; - -pci_read_config_byte (vdev->pdev,PCI_INTERRUPT_PIN , &pin); - -return pin ?1 :0 ; +return vdev->vconfig[PCI_INTERRUPT_PIN ] ?1 :0 ; }else if (irq_type ==VFIO_PCI_MSI_IRQ_INDEX ) {u8 pos;u16 flags;
drivers/vfio/pci/vfio_pci_intrs.c +1 -1
@@ -259,7 +259,7 @@ static int vfio_intx_enable(struct vfio_pci_core_device *vdev,if (!is_irq_none (vdev))return -EINVAL ; -if (!pdev->irq) +if (!pdev->irq || pdev->irq ==IRQ_NOTCONNECTED )return -ENODEV ; name =kasprintf (GFP_KERNEL_ACCOUNT ,"vfio-intx(%s)" ,pci_name (pdev));
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 162/783 bpftool: Using the right format specifiers
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jiayuan Chen <[email protected]>
[ Upstream commit 3775be3417cc3243b0df0492bd308559dcf0560b ]
Fixed some formatting specifiers errors, such as using %d for int and %u for unsigned int, as well as other byte-length types.
Perform type cast using the type derived from the data type itself, for example, if it's originally an int, it will be cast to unsigned int if forced to unsigned.
--- kernel/bpf/disasm.c | 4 ++-- tools/bpf/bpftool/btf.c | 14 +++++++------- tools/bpf/bpftool/btf_dumper.c | 2 +- tools/bpf/bpftool/cgroup.c | 2 +- tools/bpf/bpftool/common.c | 4 ++-- tools/bpf/bpftool/jit_disasm.c | 3 ++- tools/bpf/bpftool/map_perf_ring.c | 6 +++--- tools/bpf/bpftool/net.c | 4 ++-- tools/bpf/bpftool/netlink_dumper.c | 6 +++--- tools/bpf/bpftool/prog.c | 12 ++++++------ tools/bpf/bpftool/tracelog.c | 2 +- tools/bpf/bpftool/xlated_dumper.c | 6 +++--- 12 files changed, 33 insertions(+), 32 deletions(-)
kernel/bpf/disasm.c +2 -2
@@ -202,7 +202,7 @@ void print_bpf_insn(const struct bpf_insn_cbs *cbs, insn->dst_reg, class ==BPF_ALU ?'w' :'r' , insn->dst_reg); }else if (is_addr_space_cast (insn)) { -verbose (cbs->private_data,"(%02x) r%d = addr_space_cast(r%d, %d, %d)\n" , +verbose (cbs->private_data,"(%02x) r%d = addr_space_cast(r%d, %u, %u)\n" , insn->code, insn->dst_reg, insn->src_reg, ((u32 )insn->imm) >>16 , (u16 )insn->imm); }else if (is_mov_percpu_addr (insn)) {
@@ -369,7 +369,7 @@ void print_bpf_insn(const struct bpf_insn_cbs *cbs, insn->code, class ==BPF_JMP32 ?'w' :'r' , insn->dst_reg, bpf_jmp_string[BPF_OP (insn->code) >>4 ], - insn->imm, insn->off); + (u32)insn->imm, insn->off); } }else { verbose(cbs->private_data, "(%02x) %s\n",
tools/bpf/bpftool/btf.c +7 -7
@@ -253,7 +253,7 @@ static int dump_btf_type(const struct btf *btf, __u32 id,if (btf_kflag (t))printf ("\n\t'%s' val=%d" , name, v->val);else -printf ("\n\t'%s' val=%u" , name, v->val); +printf ("\n\t'%s' val=%u" , name, (__u32 )v->val); } }if (json_output)
@@ -1022,7 +1022,7 @@ static int do_dump(int argc, char **argv)for (i =0 ; i < root_type_cnt; i++) {if (root_type_ids[i] == root_id) { err = -EINVAL ; -p_err ("duplicate root_id %d supplied" , root_id); +p_err ("duplicate root_id %u supplied" , root_id); goto done; } }
@@ -1132,7 +1132,7 @@ build_btf_type_table(struct hashmap *tab, enum bpf_obj_type type,break ;default : err =-1 ; -p_err ("unexpected object type: %d" , type); +p_err ("unexpected object type: %u" , type); goto err_free; }if (err) {
@@ -1155,7 +1155,7 @@ build_btf_type_table(struct hashmap *tab, enum bpf_obj_type type,break ;default : err =-1 ; -p_err ("unexpected object type: %d" , type); +p_err ("unexpected object type: %u" , type); goto err_free; }if (fd <0 ) {
@@ -1188,7 +1188,7 @@ build_btf_type_table(struct hashmap *tab, enum bpf_obj_type type,break ;default : err =-1 ; -p_err ("unexpected object type: %d" , type); +p_err ("unexpected object type: %u" , type); goto err_free; }if (!btf_id)
@@ -1254,12 +1254,12 @@ show_btf_plain(struct bpf_btf_info *info, int fd, n =0 ;hashmap__for_each_key_entry (btf_prog_table, entry, info->id) { -printf ("%s%lu" , n++ ==0 ?" prog_ids " :"," , entry->value); +printf ("%s%lu" , n++ ==0 ?" prog_ids " :"," , (unsigned long )entry->value); } n =0 ;hashmap__for_each_key_entry (btf_map_table, entry, info->id) { -printf ("%s%lu" , n++ ==0 ?" map_ids " :"," , entry->value); +printf ("%s%lu" , n++ ==0 ?" map_ids " :"," , (unsigned long )entry->value); }emit_obj_refs_plain (refs_table, info->id,"\n\tpids " );
tools/bpf/bpftool/btf_dumper.c +1 -1
@@ -653,7 +653,7 @@ static int __btf_dumper_type_only(const struct btf *btf, __u32 type_id,case BTF_KIND_ARRAY : array = (struct btf_array *)(t +1 );BTF_PRINT_TYPE (array->type); -BTF_PRINT_ARG ("[%d]" , array->nelems); +BTF_PRINT_ARG ("[%u]" , array->nelems);break ;case BTF_KIND_PTR :BTF_PRINT_TYPE (t->type);
tools/bpf/bpftool/cgroup.c +1 -1
@@ -191,7 +191,7 @@ static int show_bpf_prog(int id, enum bpf_attach_type attach_type,if (attach_btf_name)printf (" %-15s" , attach_btf_name);else if (info.attach_btf_id) -printf (" attach_btf_obj_id=%d attach_btf_id=%d" , +printf (" attach_btf_obj_id=%u attach_btf_id=%u" , info.attach_btf_obj_id, info.attach_btf_id);printf ("\n" ); }
tools/bpf/bpftool/common.c +2 -2
@@ -713,7 +713,7 @@ ifindex_to_arch(__u32 ifindex, __u64 ns_dev, __u64 ns_ino, const char **opt)int vendor_id;if (!ifindex_to_name_ns (ifindex, ns_dev, ns_ino, devname)) { -p_err ("Can't get net device name for ifindex %d: %s" , ifindex, +p_err ("Can't get net device name for ifindex %u: %s" , ifindex,strerror (errno));return NULL ; }
@@ -738,7 +738,7 @@ ifindex_to_arch(__u32 ifindex, __u64 ns_dev, __u64 ns_ino, const char **opt)/* No NFP support in LLVM, we have no valid triple to return. */ default :p_err ("Can't get arch name for device vendor id 0x%04x" , - vendor_id); + (unsigned int )vendor_id);return NULL ; } }
tools/bpf/bpftool/jit_disasm.c +2 -1
@@ -343,7 +343,8 @@ int disasm_print_insn(unsigned char *image, ssize_t len, int opcodes, {const struct bpf_line_info *linfo =NULL ;unsigned int nr_skip =0 ; -int count, i, pc =0 ; +int count, i; +unsigned int pc =0 ;disasm_ctx_t ctx;if (!len)
tools/bpf/bpftool/map_perf_ring.c +3 -3
@@ -91,15 +91,15 @@ print_bpf_output(void *private_data, int cpu, struct perf_event_header *event)jsonw_end_object (json_wtr); }else {if (e->header.type ==PERF_RECORD_SAMPLE ) { -printf ("== @%lld.%09lld CPU: %d index: %d =====\n" , +printf ("== @%llu.%09llu CPU: %d index: %d =====\n" , e->time /1000000000ULL , e->time %1000000000ULL , cpu, idx);fprint_hex (stdout, e->data, e->size," " );printf ("\n" ); }else if (e->header.type ==PERF_RECORD_LOST ) { -printf ("lost %lld events\n" , lost->lost); +printf ("lost %llu events\n" , lost->lost); }else { -printf ("unknown event type=%d size=%d\n" , +printf ("unknown event type=%u size=%u\n" , e->header.type, e->header.size); } }
tools/bpf/bpftool/net.c +2 -2
@@ -476,7 +476,7 @@ static void __show_dev_tc_bpf(const struct ip_devname_ifindex *dev,for (i =0 ; i < optq.count; i++) {NET_START_OBJECT ;NET_DUMP_STR ("devname" ,"%s" , dev->devname); -NET_DUMP_UINT ("ifindex" ,"(%u)" , dev->ifindex); +NET_DUMP_UINT ("ifindex" ,"(%u)" , (unsigned int )dev->ifindex);NET_DUMP_STR ("kind" ," %s" , attach_loc_strings[loc]); ret =__show_dev_tc_bpf_name (prog_ids[i], prog_name,sizeof (prog_name));
@@ -831,7 +831,7 @@ static void show_link_netfilter(void)if (err) {if (errno ==ENOENT )break ; -p_err ("can't get next link: %s (id %d)" ,strerror (errno), id); +p_err ("can't get next link: %s (id %u)" ,strerror (errno), id);break ; }
tools/bpf/bpftool/netlink_dumper.c +3 -3
@@ -45,7 +45,7 @@ static int do_xdp_dump_one(struct nlattr *attr, unsigned int ifindex,NET_START_OBJECT ;if (name)NET_DUMP_STR ("devname" ,"%s" , name); -NET_DUMP_UINT ("ifindex" ,"(%d)" , ifindex); +NET_DUMP_UINT ("ifindex" ,"(%u)" , ifindex);if (mode ==XDP_ATTACHED_MULTI ) {if (json_output) {
@@ -74,7 +74,7 @@ int do_xdp_dump(struct ifinfomsg *ifinfo, struct nlattr **tb)if (!tb[IFLA_XDP ])return 0 ; -return do_xdp_dump_one (tb[IFLA_XDP ], ifinfo->ifi_index, +return do_xdp_dump_one (tb[IFLA_XDP ], (unsigned int )ifinfo->ifi_index,libbpf_nla_getattr_str (tb[IFLA_IFNAME ])); }
@@ -168,7 +168,7 @@ int do_filter_dump(struct tcmsg *info, struct nlattr **tb, const char *kind,NET_START_OBJECT ;if (devname[0 ] !='\0' )NET_DUMP_STR ("devname" ,"%s" , devname); -NET_DUMP_UINT ("ifindex" ,"(%u)" , ifindex); +NET_DUMP_UINT ("ifindex" ,"(%u)" , (unsigned int )ifindex);NET_DUMP_STR ("kind" ," %s" , kind); ret =do_bpf_filter_dump (tb[TCA_OPTIONS ]);NET_END_OBJECT_FINAL ;
tools/bpf/bpftool/prog.c +6 -6
@@ -521,10 +521,10 @@ static void print_prog_header_plain(struct bpf_prog_info *info, int fd)print_dev_plain (info->ifindex, info->netns_dev, info->netns_ino);printf ("%s" , info->gpl_compatible ?" gpl" :"" );if (info->run_time_ns) -printf (" run_time_ns %lld run_cnt %lld" , +printf (" run_time_ns %llu run_cnt %llu" , info->run_time_ns, info->run_cnt);if (info->recursion_misses) -printf (" recursion_misses %lld" , info->recursion_misses); +printf (" recursion_misses %llu" , info->recursion_misses);printf ("\n" ); }
@@ -569,7 +569,7 @@ static void print_prog_plain(struct bpf_prog_info *info, int fd, bool orphaned) }if (info->btf_id) -printf ("\n\tbtf_id %d" , info->btf_id); +printf ("\n\tbtf_id %u" , info->btf_id);emit_obj_refs_plain (refs_table, info->id,"\n\tpids " );
@@ -1164,7 +1164,7 @@ static int get_run_data(const char *fname, void **data_ptr, unsigned int *size) }if (nb_read > buf_size - block_size) {if (buf_size ==UINT32_MAX ) { -p_err ("data_in/ctx_in is too long (max: %d)" , +p_err ("data_in/ctx_in is too long (max: %u)" ,UINT32_MAX ); goto err_free; }
@@ -2252,7 +2252,7 @@ static char *profile_target_name(int tgt_fd) t =btf__type_by_id (btf, func_info.type_id);if (!t) { -p_err ("btf %d doesn't have type %d" , +p_err ("btf %u doesn't have type %u" , info.btf_id, func_info.type_id); goto out; }
@@ -2330,7 +2330,7 @@ static int profile_open_perf_events(struct profiler_bpf *obj)continue ;for (cpu =0 ; cpu < obj->rodata->num_cpu; cpu++) {if (profile_open_perf_event (m, cpu, map_fd)) { -p_err ("failed to create event %s on cpu %d" , +p_err ("failed to create event %s on cpu %u" , metrics[m].name, cpu);return -1 ; }
tools/bpf/bpftool/tracelog.c +1 -1
@@ -78,7 +78,7 @@ static bool get_tracefs_pipe(char *mnt)return false;/* Allow room for NULL terminating byte and pipe file name */ -snprintf (format,sizeof (format),"%%*s %%%zds %%99s %%*s %%*d %%*d\\n" , +snprintf (format,sizeof (format),"%%*s %%%zus %%99s %%*s %%*d %%*d\\n" ,PATH_MAX -strlen (pipe_name) -1 );while (fscanf (fp, format, mnt, type) ==2 )if (strcmp (type, fstype) ==0 ) {
tools/bpf/bpftool/xlated_dumper.c +3 -3
@@ -199,13 +199,13 @@ static const char *print_imm(void *private_data,if (insn->src_reg ==BPF_PSEUDO_MAP_FD )snprintf (dd->scratch_buff,sizeof (dd->scratch_buff), -"map[id:%u]" , insn->imm); +"map[id:%d]" , insn->imm);else if (insn->src_reg ==BPF_PSEUDO_MAP_VALUE )snprintf (dd->scratch_buff,sizeof (dd->scratch_buff), -"map[id:%u][0]+%u" , insn->imm, (insn +1 )->imm); +"map[id:%d][0]+%d" , insn->imm, (insn +1 )->imm);else if (insn->src_reg ==BPF_PSEUDO_MAP_IDX_VALUE )snprintf (dd->scratch_buff,sizeof (dd->scratch_buff), -"map[idx:%u]+%u" , insn->imm, (insn +1 )->imm); +"map[idx:%d]+%d" , insn->imm, (insn +1 )->imm);else if (insn->src_reg ==BPF_PSEUDO_FUNC )snprintf (dd->scratch_buff,sizeof (dd->scratch_buff),"subprog[%+d]" , insn->imm);
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 163/783 bpf: Return prog btf_id without capable check
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mykyta Yatsenko <[email protected]>
[ Upstream commit 07651ccda9ff10a8ca427670cdd06ce2c8e4269c ]
Return prog's btf_id from bpf_prog_get_info_by_fd regardless of capable check. This patch enables scenario, when freplace program, running from user namespace, requires to query target prog's btf.
--- kernel/bpf/syscall.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
kernel/bpf/syscall.c +2 -2
@@ -4733,6 +4733,8 @@ static int bpf_prog_get_info_by_fd(struct file *file, info.recursion_misses = stats.misses; info.verified_insns = prog->aux->verified_insns; +if (prog->aux->btf) + info.btf_id =btf_obj_id (prog->aux->btf);if (!bpf_capable ()) { info.jited_prog_len =0 ;
@@ -4879,8 +4881,6 @@ static int bpf_prog_get_info_by_fd(struct file *file, } } -if (prog->aux->btf) - info.btf_id =btf_obj_id (prog->aux->btf); info.attach_btf_id = prog->aux->attach_btf_id;if (attach_btf) info.attach_btf_obj_id =btf_obj_id (attach_btf);
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 164/783 PCI: dwc: Use resource start as ioremap() input in dw_pcie_pme_turn_off()
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Frank Li <[email protected]>
[ Upstream commit 8f4a489b370e6612700aa16b9e4373b2d85d7503 ]
The msg_res region translates writes into PCIe Message TLPs. Previously we mapped this region using atu.cpu_addr, the input address programmed into the ATU.
"cpu_addr" is a misnomer because when a bus fabric translates addresses between the CPU and the ATU, the ATU input address is different from the CPU address. A future patch will rename "cpu_addr" and correct the value to be the ATU input address instead of the CPU physical address.
Map the msg_res region before writing to it using the msg_res resource start, a CPU physical address.
--- drivers/pci/controller/dwc/pcie-designware-host.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/pci/controller/dwc/pcie-designware-host.c +1 -1
@@ -908,7 +908,7 @@ static int dw_pcie_pme_turn_off(struct dw_pcie *pci)if (ret)return ret; - mem =ioremap (atu.cpu_addr, pci->region_align); + mem =ioremap (pci->pp.msg_res->start, pci->region_align);if (!mem)return -ENOMEM ;
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 165/783 jbd2: do not try to recover wiped journal
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jan Kara <[email protected]>
[ Upstream commit a662f3c03b754e1f97a2781fa242e95bdb139798 ]
If a journal is wiped, we will set journal->j_tail to 0. However if 'write' argument is not set (as it happens for read-only device or for ocfs2), the on-disk superblock is not updated accordingly and thus jbd2_journal_recover() cat try to recover the wiped journal. Fix the check in jbd2_journal_recover() to use journal->j_tail for checking empty journal instead.
--- fs/jbd2/recovery.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
fs/jbd2/recovery.c +6 -5
@@ -287,19 +287,20 @@ static int fc_do_one_pass(journal_t *journal,int jbd2_journal_recover (journal_t *journal) {int err, err2; -journal_superblock_t * sb; -struct recovery_info info;memset (&info,0 ,sizeof (info)); - sb = journal->j_superblock;/* * The journal superblock's s_start field (the current log head) * is always zero if, and only if, the journal was cleanly -* unmounted. +* unmounted. We use its in-memory version j_tail here because +* jbd2_journal_wipe() could have updated it without updating journal +* superblock. */ -if (!sb->s_start) { +if (!journal->j_tail) { +journal_superblock_t *sb = journal->j_superblock; +jbd2_debug (1 ,"No recovery required, last transaction %d, head block %u\n" ,be32_to_cpu (sb->s_sequence),be32_to_cpu (sb->s_head)); journal->j_transaction_sequence =be32_to_cpu (sb->s_sequence) +1 ;
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 166/783 tcp: reorganize tcp_in_ack_event() and tcp_count_delivered()
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ilpo Järvinen <[email protected]>
[ Upstream commit 149dfb31615e22271d2525f078c95ea49bc4db24 ]
- Move tcp_count_delivered() earlier and split tcp_count_delivered_ce() out of it
- Move tcp_in_ack_event() later
- While at it, remove the inline from tcp_in_ack_event() and let the compiler to decide
Accurate ECN's heuristics does not know if there is going to be ACE field based CE counter increase or not until after rtx queue has been processed. Only then the number of ACKed bytes/pkts is available. As CE or not affects presence of FLAG_ECE, that information for tcp_in_ack_event is not yet available in the old location of the call to tcp_in_ack_event().
--- net/ipv4/tcp_input.c | 56 +++++++++++++++++++++++++------------------- 1 file changed, 32 insertions(+), 24 deletions(-)
net/ipv4/tcp_input.c +32 -24
@@ -419,6 +419,20 @@ static bool tcp_ecn_rcv_ecn_echo(const struct tcp_sock *tp, const struct tcphdrreturn false; } +static void tcp_count_delivered_ce (struct tcp_sock *tp,u32 ecn_count) +{ + tp->delivered_ce += ecn_count; +} + +/* Updates the delivered and delivered_ce counts */ +static void tcp_count_delivered (struct tcp_sock *tp,u32 delivered, +bool ece_ack) +{ + tp->delivered += delivered; +if (ece_ack) +tcp_count_delivered_ce (tp, delivered); +} +/* Buffer size and advertised window tuning. * * 1. Tuning sk->sk_sndbuf, when connection enters established state.
@@ -1154,15 +1168,6 @@ void tcp_mark_skb_lost(struct sock *sk, struct sk_buff *skb) } } -/* Updates the delivered and delivered_ce counts */ -static void tcp_count_delivered (struct tcp_sock *tp,u32 delivered, -bool ece_ack) -{ - tp->delivered += delivered; -if (ece_ack) - tp->delivered_ce += delivered; -} -/* This procedure tags the retransmission queue when SACKs arrive. * * We have three tag bits: SACKED(S), RETRANS(R) and LOST(L).
@@ -3862,12 +3867,23 @@ static void tcp_process_tlp_ack(struct sock *sk, u32 ack, int flag) } } -static inline void tcp_in_ack_event (struct sock *sk,u32 flags) +static void tcp_in_ack_event (struct sock *sk,int flag) {const struct inet_connection_sock *icsk =inet_csk (sk); -if (icsk->icsk_ca_ops->in_ack_event) - icsk->icsk_ca_ops->in_ack_event (sk, flags); +if (icsk->icsk_ca_ops->in_ack_event) { +u32 ack_ev_flags =0 ; + +if (flag &FLAG_WIN_UPDATE ) + ack_ev_flags |=CA_ACK_WIN_UPDATE ; +if (flag &FLAG_SLOWPATH ) { + ack_ev_flags |=CA_ACK_SLOWPATH ; +if (flag &FLAG_ECE ) + ack_ev_flags |=CA_ACK_ECE ; + } + + icsk->icsk_ca_ops->in_ack_event (sk, ack_ev_flags); + } }/* Congestion control has updated the cwnd already. So if we're in
@@ -3984,12 +4000,8 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag)tcp_snd_una_update (tp, ack); flag |=FLAG_WIN_UPDATE ; -tcp_in_ack_event (sk,CA_ACK_WIN_UPDATE ); -NET_INC_STATS (sock_net (sk),LINUX_MIB_TCPHPACKS ); }else { -u32 ack_ev_flags =CA_ACK_SLOWPATH ; -if (ack_seq !=TCP_SKB_CB (skb)->end_seq) flag |=FLAG_DATA ;else
@@ -4001,19 +4013,12 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag) flag |=tcp_sacktag_write_queue (sk, skb, prior_snd_una, &sack_state); -if (tcp_ecn_rcv_ecn_echo (tp,tcp_hdr (skb))) { +if (tcp_ecn_rcv_ecn_echo (tp,tcp_hdr (skb))) flag |=FLAG_ECE ; - ack_ev_flags |=CA_ACK_ECE ; - }if (sack_state.sack_delivered)tcp_count_delivered (tp, sack_state.sack_delivered, flag &FLAG_ECE ); - -if (flag &FLAG_WIN_UPDATE ) - ack_ev_flags |=CA_ACK_WIN_UPDATE ; - -tcp_in_ack_event (sk, ack_ev_flags); }/* This is a deviation from RFC3168 since it states that:
@@ -4040,6 +4045,8 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag)tcp_rack_update_reo_wnd (sk, &rs); +tcp_in_ack_event (sk, flag); +if (tp->tlp_high_seq)tcp_process_tlp_ack (sk, ack, flag);
@@ -4071,6 +4078,7 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag)return 1 ; no_queue: +tcp_in_ack_event (sk, flag);/* If data was DSACKed, see if we can undo a cwnd reduction. */ if (flag &FLAG_DSACKING_ACK ) { tcp_fastretrans_alert(sk, prior_snd_una, num_dupack, &flag,
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 167/783 rtc: rv3032: fix EERD location
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alexandre Belloni <[email protected]>
[ Upstream commit b0f9cb4a0706b0356e84d67e48500b77b343debe ]
EERD is bit 2 in CTRL1
--- drivers/rtc/rtc-rv3032.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/rtc/rtc-rv3032.c +1 -1
@@ -69,7 +69,7 @@#define RV3032_CLKOUT2_FD_MSK GENMASK(6, 5)#define RV3032_CLKOUT2_OS BIT(7) -#define RV3032_CTRL1_EERD BIT(3) +#define RV3032_CTRL1_EERD BIT(2)#define RV3032_CTRL1_WADA BIT(5)#define RV3032_CTRL2_STOP BIT(0)
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 168/783 objtool: Fix error handling inconsistencies in check()
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Josh Poimboeuf <[email protected]>
[ Upstream commit b745962cb97569aad026806bb0740663cf813147 ]
Make sure all fatal errors are funneled through the 'out' label with a negative ret.
--- tools/objtool/check.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
tools/objtool/check.c +6 -4
@@ -4633,8 +4633,10 @@ int check(struct objtool_file *file)init_cfi_state (&force_undefined_cfi); force_undefined_cfi.force_undefined = true; -if (!cfi_hash_alloc (1UL << (file->elf->symbol_bits -3 ))) +if (!cfi_hash_alloc (1UL << (file->elf->symbol_bits -3 ))) { + ret =-1 ; goto out; + }cfi_hash_add (&init_cfi);cfi_hash_add (&func_cfi);
@@ -4651,7 +4653,7 @@ int check(struct objtool_file *file)if (opts.retpoline) { ret =validate_retpoline (file);if (ret <0 ) -return ret; + goto out; warnings += ret; }
@@ -4687,7 +4689,7 @@ int check(struct objtool_file *file)*/ ret =validate_unrets (file);if (ret <0 ) -return ret; + goto out; warnings += ret; }
@@ -4750,7 +4752,7 @@ int check(struct objtool_file *file)if (opts.prefix) { ret =add_prefix_symbols (file);if (ret <0 ) -return ret; + goto out; warnings += ret; }
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 169/783 thunderbolt: Do not add non-active NVM if NVM upgrade is disabled for retimer
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mika Westerberg <[email protected]>
[ Upstream commit ad79c278e478ca8c1a3bf8e7a0afba8f862a48a1 ]
This is only used to write a new NVM in order to upgrade the retimer firmware. It does not make sense to expose it if upgrade is disabled. This also makes it consistent with the router NVM upgrade.
--- drivers/thunderbolt/retimer.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
drivers/thunderbolt/retimer.c +5 -3
@@ -93,9 +93,11 @@ static int tb_retimer_nvm_add(struct tb_retimer *rt)if (ret) goto err_nvm; - ret =tb_nvm_add_non_active (nvm, nvm_write); -if (ret) - goto err_nvm; +if (!rt->no_nvm_upgrade) { + ret =tb_nvm_add_non_active (nvm, nvm_write); +if (ret) + goto err_nvm; + } rt->nvm = nvm;dev_dbg (&rt->dev,"NVM version %x.%x\n" , nvm->major, nvm->minor);
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 170/783 erofs: initialize decompression early
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Gao Xiang <[email protected]>
[ Upstream commit fe1e57d44d7f106df9048e815e4862cf63921220 ]
- Rename erofs_init_managed_cache() to z_erofs_init_super();
- Move the initialization of managed_pslots into z_erofs_init_super() too;
- Move z_erofs_init_super() and packed inode preparation upwards, before the root inode initialization.
Therefore, the root directory can also be compressible.
--- fs/erofs/internal.h | 4 ++-- fs/erofs/super.c | 46 ++++++++++++++++++++++----------------------- fs/erofs/zdata.c | 4 ++-- 3 files changed, 26 insertions(+), 28 deletions(-)
fs/erofs/internal.h +2 -2
@@ -446,6 +446,7 @@ int __init erofs_init_shrinker(void);void erofs_exit_shrinker (void );int __init z_erofs_init_subsystem (void );void z_erofs_exit_subsystem (void ); +int z_erofs_init_super (struct super_block *sb);unsigned long z_erofs_shrink_scan (struct erofs_sb_info *sbi,unsigned long nr_shrink); int z_erofs_map_blocks_iter(struct inode *inode, struct erofs_map_blocks *map,
@@ -455,7 +456,6 @@ void z_erofs_put_gbuf(void *ptr);int z_erofs_gbuf_growsize (unsigned int nrpages);int __init z_erofs_gbuf_init (void );void z_erofs_gbuf_exit (void ); -int erofs_init_managed_cache (struct super_block *sb);int z_erofs_parse_cfgs (struct super_block *sb,struct erofs_super_block *dsb);#else static inline void erofs_shrinker_register (struct super_block *sb) {}
@@ -464,7 +464,7 @@ static inline int erofs_init_shrinker(void) { return 0; }static inline void erofs_exit_shrinker (void ) {}static inline int z_erofs_init_subsystem (void ) {return 0 ; }static inline void z_erofs_exit_subsystem (void ) {} -static inline int erofs_init_managed_cache (struct super_block *sb) {return 0 ; } +static inline int z_erofs_init_super (struct super_block *sb) {return 0 ; }#endif /* !CONFIG_EROFS_FS_ZIP */ #ifdef CONFIG_EROFS_FS_BACKED_BY_FILE
fs/erofs/super.c +22 -24
84 lines not on this page · raw message
fs/erofs/zdata.c +2 -2
@@ -641,18 +641,18 @@ static const struct address_space_operations z_erofs_cache_aops = { .invalidate_folio = z_erofs_cache_invalidate_folio, }; -int erofs_init_managed_cache (struct super_block *sb) +int z_erofs_init_super (struct super_block *sb) {struct inode *const inode =new_inode (sb);if (!inode)return -ENOMEM ; -set_nlink (inode,1 ); inode->i_size =OFFSET_MAX ; inode->i_mapping->a_ops = &z_erofs_cache_aops;mapping_set_gfp_mask (inode->i_mapping,GFP_KERNEL );EROFS_SB (sb)->managed_cache = inode; +xa_init (&EROFS_SB (sb)->managed_pslots);return 0 ; }
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 171/783 spi: spi-mux: Fix coverity issue, unchecked return value
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Sergio Perez Gonzalez <[email protected]>
[ Upstream commit 5a5fc308418aca275a898d638bc38c093d101855 ]
The return value of spi_setup() is not captured within spi_mux_select() and it is assumed to be always success.
CID: 1638374
--- drivers/spi/spi-mux.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/spi/spi-mux.c +1 -3
@@ -68,9 +68,7 @@ static int spi_mux_select(struct spi_device *spi) priv->current_cs =spi_get_chipselect (spi,0 ); -spi_setup (priv->spi); - -return 0 ; +return spi_setup (priv->spi); }static int spi_mux_setup (struct spi_device *spi)
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 172/783 ASoC: sma1307: Add NULL check in sma1307_setting_loaded()
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Chenyuan Yang <[email protected]>
[ Upstream commit 0ec6bd16705fe21d6429d6b8f7981eae2142bba8 ]
All varibale allocated by kzalloc and devm_kzalloc could be NULL. Multiple pointer checks and their cleanup are added.
This issue is found by our static analysis tool
--- sound/soc/codecs/sma1307.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
sound/soc/codecs/sma1307.c +28 -0
@@ -1728,6 +1728,11 @@ static void sma1307_setting_loaded(struct sma1307_priv *sma1307, const char *fil } data =kzalloc (fw->size,GFP_KERNEL ); +if (!data) { +release_firmware (fw); + sma1307->set.status = false; +return ; + } size = fw->size >>2 ;memcpy (data, fw->data, fw->size);
@@ -1741,6 +1746,12 @@ static void sma1307_setting_loaded(struct sma1307_priv *sma1307, const char *fil sma1307->set.header =devm_kzalloc (sma1307->dev, sma1307->set.header_size,GFP_KERNEL ); +if (!sma1307->set.header) { +kfree (data); + sma1307->set.status = false; +return ; + } +memcpy (sma1307->set.header, data, sma1307->set.header_size *sizeof (int ));
@@ -1756,6 +1767,13 @@ static void sma1307_setting_loaded(struct sma1307_priv *sma1307, const char *fil sma1307->set.def =devm_kzalloc (sma1307->dev, sma1307->set.def_size *sizeof (int ),GFP_KERNEL ); +if (!sma1307->set.def) { +kfree (data); +kfree (sma1307->set.header); + sma1307->set.status = false; +return ; + } +memcpy (sma1307->set.def, &data[sma1307->set.header_size], sma1307->set.def_size *sizeof (int ));
@@ -1768,6 +1786,16 @@ static void sma1307_setting_loaded(struct sma1307_priv *sma1307, const char *fil = devm_kzalloc(sma1307->dev, sma1307->set.mode_size *2 *sizeof (int ),GFP_KERNEL ); +if (!sma1307->set.mode_set[i]) { +kfree (data); +kfree (sma1307->set.header); +kfree (sma1307->set.def); +for (int j =0 ; j < i; j++) +kfree (sma1307->set.mode_set[j]); + sma1307->set.status = false; +return ; + } +for (int j =0 ; j < sma1307->set.mode_size; j++) { sma1307->set.mode_set[i][2 * j] = data[offset + ((num_mode +1 ) * j)];
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 173/783 ASoC: pcm6240: Drop bogus code handling IRQ as GPIO
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Linus Walleij <[email protected]>
[ Upstream commit 17fdf318f5fbe5c27353ae917c0c5a2899d9c259 ]
The current code for the IRQ in pcm6240 makes no sense:
it looks up an IRQ with of_irq_get(), treat it as a GPIO by issuing gpio_request(), gpio_direction_input() and gpio_to_irq() on it.
This is just wrong, if the device tree assigns the IRQ from a GPIO number this is just incorrect: it is clearly stated that GPIO providers and IRQ providers are orthogonal.
It is possible to look up an IRQ to a corresponding GPIO line but this is taking an IRQ and pretending it's a GPIO, which is just semantically wrong.
Drop the offending code and treat the IRQ that we get from the device tree as any other IRQ, see for example other codec drivers.
The DT bindings for this codec does not have any in-tree DTS files, which may explain why things are weird.
As a bonus, this moves the driver away from the legacy <linux/gpio.h> include.
--- sound/soc/codecs/pcm6240.c | 28 +++++++--------------------- sound/soc/codecs/pcm6240.h | 7 +------ 2 files changed, 8 insertions(+), 27 deletions(-)
sound/soc/codecs/pcm6240.c +7 -21
@@ -14,7 +14,7 @@#include <linux/unaligned.h> #include <linux/firmware.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/i2c.h> #include <linux/module.h> #include <linux/of_irq.h>
@@ -2035,10 +2035,8 @@ static const struct regmap_config pcmdevice_i2c_regmap = {static void pcmdevice_remove (struct pcmdevice_priv *pcm_dev) { -if (gpio_is_valid (pcm_dev->irq_info.gpio)) { -gpio_free (pcm_dev->irq_info.gpio); -free_irq (pcm_dev->irq_info.nmb, pcm_dev); - } +if (pcm_dev->irq) +free_irq (pcm_dev->irq, pcm_dev);mutex_destroy (&pcm_dev->codec_lock); }
@@ -2109,7 +2107,7 @@ static int pcmdevice_i2c_probe(struct i2c_client *i2c) ndev =1 ; dev_addrs[0 ] = i2c->addr; } - pcm_dev->irq_info.gpio =of_irq_get (np,0 ); + pcm_dev->irq =of_irq_get (np,0 );for (i =0 ; i < ndev; i++) pcm_dev->addr[i] = dev_addrs[i];
@@ -2132,22 +2130,10 @@ static int pcmdevice_i2c_probe(struct i2c_client *i2c)if (pcm_dev->chip_id ==PCM1690 ) goto skip_interrupt; -if (gpio_is_valid (pcm_dev->irq_info.gpio)) { -dev_dbg (pcm_dev->dev,"irq-gpio = %d" , pcm_dev->irq_info.gpio); - - ret =gpio_request (pcm_dev->irq_info.gpio,"PCMDEV-IRQ" ); -if (!ret) { -int gpio = pcm_dev->irq_info.gpio; - -gpio_direction_input (gpio); - pcm_dev->irq_info.nmb =gpio_to_irq (gpio); - - }else -dev_err (pcm_dev->dev,"%s: GPIO %d request error\n" , - __func__, pcm_dev->irq_info.gpio); +if (pcm_dev->irq) { +dev_dbg (pcm_dev->dev,"irq = %d" , pcm_dev->irq); }else -dev_err (pcm_dev->dev,"Looking up irq-gpio failed %d\n" , - pcm_dev->irq_info.gpio); +dev_err (pcm_dev->dev,"No irq provided\n" ); skip_interrupt: ret = devm_snd_soc_register_component(&i2c->dev,
sound/soc/codecs/pcm6240.h +1 -6
@@ -208,11 +208,6 @@ struct pcmdevice_regbin {struct pcmdevice_config_info **cfg_info; }; -struct pcmdevice_irqinfo { -int gpio; -int nmb; -}; -struct pcmdevice_priv {struct snd_soc_component *component;struct i2c_client *client;
@@ -221,7 +216,7 @@ struct pcmdevice_priv {struct gpio_desc *hw_rst;struct regmap *regmap;struct pcmdevice_regbin regbin; -struct pcmdevice_irqinfo irq_info; +int irq;unsigned int addr[PCMDEVICE_MAX_I2C_DEVICES ];unsigned int chip_id;int cur_conf;
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 174/783 ASoC: mediatek: mt6359: Add stub for mt6359_accdet_enable_jack_detect
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nícolas F. R. A. Prado <[email protected]>
[ Upstream commit 0116a7d84b32537a10d9bea1fd1bfc06577ef527 ]
Add a stub for mt6359_accdet_enable_jack_detect() to prevent linker failures in the machine sound drivers calling it when CONFIG_SND_SOC_MT6359_ACCDET is not enabled.
--- sound/soc/codecs/mt6359-accdet.h | 9 +++++++++ 1 file changed, 9 insertions(+)
sound/soc/codecs/mt6359-accdet.h +9 -0
@@ -123,6 +123,15 @@ struct mt6359_accdet { struct workqueue_struct *jd_workqueue; }; +#if IS_ENABLED (CONFIG_SND_SOC_MT6359_ACCDET )int mt6359_accdet_enable_jack_detect (struct snd_soc_component *component,struct snd_soc_jack *jack); +#else +static inline int +mt6359_accdet_enable_jack_detect (struct snd_soc_component *component, +struct snd_soc_jack *jack) +{ +return -EOPNOTSUPP ; +} +#endif #endif
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 175/783 kunit: tool: Fix bug in parsing test plan
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Rae Moar <[email protected]>
[ Upstream commit 1d4c06d51963f89f67c7b75d5c0c34e9d1bb2ae6 ]
A bug was identified where the KTAP below caused an infinite loop:
TAP version 13
ok 4 test_case
1..4
The infinite loop was caused by the parser not parsing a test plan if following a test result line.
Fix this bug by parsing test plan line to avoid the infinite loop.
--- tools/testing/kunit/kunit_parser.py | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
tools/testing/kunit/kunit_parser.py +4 -5
@@ -759,7 +759,7 @@ def parse_test(lines: LineStream, expected_num: int, log: List[str], is_subtest: # If parsing the main/top-level test, parse KTAP version line and # test plan test.name = "main" - ktap_line = parse_ktap_header(lines, test, printer) + parse_ktap_header(lines, test, printer) test.log.extend(parse_diagnostic(lines)) parse_test_plan(lines, test) parent_test = True
@@ -768,13 +768,12 @@ def parse_test(lines: LineStream, expected_num: int, log: List[str], is_subtest: # the KTAP version line and/or subtest header line ktap_line = parse_ktap_header(lines, test, printer) subtest_line = parse_test_header(lines, test) + test.log.extend(parse_diagnostic(lines)) + parse_test_plan(lines, test) parent_test = (ktap_line or subtest_line) if parent_test: - # If KTAP version line and/or subtest header is found, attempt - # to parse test plan and print test header - test.log.extend(parse_diagnostic(lines)) - parse_test_plan(lines, test) print_test_header(test, printer) + expected_count = test.expected_count subtests = [] test_num = 1
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 176/783 bpf: Allow pre-ordering for bpf cgroup progs
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yonghong Song <[email protected]>
[ Upstream commit 4b82b181a26cff8bf7adc3a85a88d121d92edeaf ]
Currently for bpf progs in a cgroup hierarchy, the effective prog array is computed from bottom cgroup to upper cgroups (post-ordering). For example, the following cgroup hierarchy
root cgroup: p1, p2
subcgroup: p3, p4
have BPF_F_ALLOW_MULTI for both cgroup levels.
The effective cgroup array ordering looks like
p3 p4 p1 p2
and at run time, progs will execute based on that order.
But in some cases, it is desirable to have root prog executes earlier than children progs (pre-ordering). For example,
- prog p1 intends to collect original pkt dest addresses.
- prog p3 will modify original pkt dest addresses to a proxy address for security reason.
The end result is that prog p1 gets proxy address which is not what it wants. Putting p1 to every child cgroup is not desirable either as it will duplicate itself in many child cgroups. And this is exactly a use case we are encountering in Meta.
To fix this issue, let us introduce a flag BPF_F_PREORDER. If the flag is specified at attachment time, the prog has higher priority and the ordering with that flag will be from top to bottom (pre-ordering). For example, in the above example,
root cgroup: p1, p2
subcgroup: p3, p4
Let us say p2 and p4 are marked with BPF_F_PREORDER. The final effective array ordering will be
p2 p4 p3 p1
--- include/linux/bpf-cgroup.h | 1 + include/uapi/linux/bpf.h | 1 + kernel/bpf/cgroup.c | 33 +++++++++++++++++++++++++-------- kernel/bpf/syscall.c | 3 ++- tools/include/uapi/linux/bpf.h | 1 + 5 files changed, 30 insertions(+), 9 deletions(-)
include/linux/bpf-cgroup.h +1 -0
@@ -111,6 +111,7 @@ struct bpf_prog_list {struct bpf_prog *prog;struct bpf_cgroup_link *link;struct bpf_cgroup_storage *storage[MAX_BPF_CGROUP_STORAGE_TYPE ]; +u32 flags; };int cgroup_bpf_inherit (struct cgroup *cgrp);
include/uapi/linux/bpf.h +1 -0
@@ -1207,6 +1207,7 @@ enum bpf_perf_event_type {#define BPF_F_BEFORE (1U << 3)#define BPF_F_AFTER (1U << 4)#define BPF_F_ID (1U << 5) +#define BPF_F_PREORDER (1U << 6)#define BPF_F_LINK BPF_F_LINK/* 1 << 13 */ /* If BPF_F_STRICT_ALIGNMENT is used in BPF_PROG_LOAD command, the
kernel/bpf/cgroup.c +25 -8
@@ -369,7 +369,7 @@ static struct bpf_prog *prog_list_prog(struct bpf_prog_list *pl)/* count number of elements in the list. * it's slow but the list cannot be long */ -static u32 prog_list_length (struct hlist_head *head) +static u32 prog_list_length (struct hlist_head *head,int *preorder_cnt) {struct bpf_prog_list *pl;u32 cnt =0 ;
@@ -377,6 +377,8 @@ static u32 prog_list_length(struct hlist_head *head)hlist_for_each_entry (pl, head, node) {if (!prog_list_prog (pl))continue ; +if (preorder_cnt && (pl->flags &BPF_F_PREORDER )) + (*preorder_cnt)++; cnt++; }return cnt;
@@ -400,7 +402,7 @@ static bool hierarchy_allows_attach(struct cgroup *cgrp,if (flags &BPF_F_ALLOW_MULTI )return true; - cnt =prog_list_length (&p->bpf.progs[atype]); + cnt =prog_list_length (&p->bpf.progs[atype],NULL );WARN_ON_ONCE (cnt >1 );if (cnt ==1 )return !!(flags &BPF_F_ALLOW_OVERRIDE );
@@ -423,12 +425,12 @@ static int compute_effective_progs(struct cgroup *cgrp,struct bpf_prog_array *progs;struct bpf_prog_list *pl;struct cgroup *p = cgrp; -int cnt =0 ; +int i, j, cnt =0 , preorder_cnt =0 , fstart, bstart, init_bstart;/* count number of effective programs by walking parents */ do {if (cnt ==0 || (p->bpf.flags[atype] &BPF_F_ALLOW_MULTI )) - cnt +=prog_list_length (&p->bpf.progs[atype]); + cnt +=prog_list_length (&p->bpf.progs[atype], &preorder_cnt); p =cgroup_parent (p); }while (p);
@@ -439,20 +441,34 @@ static int compute_effective_progs(struct cgroup *cgrp,/* populate the array with effective progs */ cnt =0 ; p = cgrp; + fstart = preorder_cnt; + bstart = preorder_cnt -1 ;do {if (cnt >0 && !(p->bpf.flags[atype] &BPF_F_ALLOW_MULTI ))continue ; + init_bstart = bstart;hlist_for_each_entry (pl, &p->bpf.progs[atype], node) {if (!prog_list_prog (pl))continue ; - item = &progs->items[cnt]; +if (pl->flags &BPF_F_PREORDER ) { + item = &progs->items[bstart]; + bstart--; + }else { + item = &progs->items[fstart]; + fstart++; + } item->prog =prog_list_prog (pl);bpf_cgroup_storages_assign (item->cgroup_storage, pl->storage); cnt++; } + +/* reverse pre-ordering progs at this cgroup level */ +for (i = bstart +1 , j = init_bstart; i < j; i++, j--) +swap (progs->items[i], progs->items[j]); + }while ((p =cgroup_parent (p))); *array = progs;
@@ -663,7 +679,7 @@ static int __cgroup_bpf_attach(struct cgroup *cgrp,*/ return -EPERM ; -if (prog_list_length (progs) >=BPF_CGROUP_MAX_PROGS ) +if (prog_list_length (progs,NULL ) >=BPF_CGROUP_MAX_PROGS )return -E2BIG ; pl = find_attach_entry(progs, prog, link, replace_prog,
@@ -698,6 +714,7 @@ static int __cgroup_bpf_attach(struct cgroup *cgrp, pl->prog = prog; pl->link = link; + pl->flags = flags;bpf_cgroup_storages_assign (pl->storage, storage); cgrp->bpf.flags[atype] = saved_flags;
@@ -1073,7 +1090,7 @@ static int __cgroup_bpf_query(struct cgroup *cgrp, const union bpf_attr *attr, lockdep_is_held(&cgroup_mutex)); total_cnt +=bpf_prog_array_length (effective); }else { - total_cnt +=prog_list_length (&cgrp->bpf.progs[atype]); + total_cnt +=prog_list_length (&cgrp->bpf.progs[atype],NULL ); } }
@@ -1105,7 +1122,7 @@ static int __cgroup_bpf_query(struct cgroup *cgrp, const union bpf_attr *attr,u32 id; progs = &cgrp->bpf.progs[atype]; - cnt =min_t (int,prog_list_length (progs), total_cnt); + cnt =min_t (int,prog_list_length (progs,NULL ), total_cnt); i =0 ;hlist_for_each_entry (pl, progs, node) { prog =prog_list_prog (pl);
kernel/bpf/syscall.c +2 -1
@@ -4169,7 +4169,8 @@ static int bpf_prog_attach_check_attach_type(const struct bpf_prog *prog,#define BPF_F_ATTACH_MASK_BASE \ (BPF_F_ALLOW_OVERRIDE | \ BPF_F_ALLOW_MULTI | \ - BPF_F_REPLACE) + BPF_F_REPLACE | \ + BPF_F_PREORDER)#define BPF_F_ATTACH_MASK_MPROG \ (BPF_F_REPLACE | \
tools/include/uapi/linux/bpf.h +1 -0
@@ -1207,6 +1207,7 @@ enum bpf_perf_event_type {#define BPF_F_BEFORE (1U << 3)#define BPF_F_AFTER (1U << 4)#define BPF_F_ID (1U << 5) +#define BPF_F_PREORDER (1U << 6)#define BPF_F_LINK BPF_F_LINK/* 1 << 13 */ /* If BPF_F_STRICT_ALIGNMENT is used in BPF_PROG_LOAD command, the
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 177/783 kbuild: fix argument parsing in scripts/config
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Seyediman Seyedarab <[email protected]>
[ Upstream commit f757f6011c92b5a01db742c39149bed9e526478f ]
The script previously assumed --file was always the first argument, which caused issues when it appeared later. This patch updates the parsing logic to scan all arguments to find --file, sets the config file correctly, and resets the argument list with the remaining commands.
It also fixes --refresh to respect --file by passing KCONFIG_CONFIG=$FN to make oldconfig.
--- scripts/config | 26 ++++++++++++++++---------- 1 file changed, 16 insertions(+), 10 deletions(-)
scripts/config +16 -10
@@ -32,6 +32,7 @@ commands: Disable option directly after other option --module-after|-M beforeopt option Turn option into module directly after other option + --refresh Refresh the config using old settings commands can be repeated multiple times
@@ -124,16 +125,22 @@ undef_var() { txt_delete "^# $name is not set" "$FN" } -if [ "$1" = "--file" ]; then - FN="$2" - if [ "$FN" = "" ] ; then - usage +FN=.config +CMDS=() +while [[ $# -gt 0 ]]; do + if [ "$1" = "--file" ]; then + if [ "$2" = "" ]; then + usage + fi + FN="$2" + shift 2 + else + CMDS+=("$1") + shift fi - shift 2 -else - FN=.config -fi +done +set -- "${CMDS[@]}" if [ "$1" = "" ] ; then usage fi
@@ -217,9 +224,8 @@ while [ "$1" != "" ] ; do set_var "${CONFIG_}$B" "${CONFIG_}$B=m" "${CONFIG_}$A" ;; - # undocumented because it ignores --file (fixme) --refresh) - yes "" | make oldconfig + yes "" | make oldconfig KCONFIG_CONFIG=$FN ;; *)
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 178/783 kconfig: do not clear SYMBOL_VALID when reading include/config/auto.conf
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Masahiro Yamada <[email protected]>
[ Upstream commit 226ac19c217f24f0927d0a73cf9ee613971a188d ]
When conf_read_simple() is called with S_DEF_AUTO, it is meant to read previous symbol values from include/config/auto.conf to determine which include/config/* files should be touched.
This process should not modify the current symbol status in any way. However, conf_touch_deps() currently invalidates all symbol values and recalculates them, which is totally unneeded.
--- scripts/kconfig/confdata.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-)
scripts/kconfig/confdata.c +12 -7
@@ -385,7 +385,7 @@ int conf_read_simple(const char *name, int def) def_flags =SYMBOL_DEF << def;for_all_symbols (sym) { - sym->flags &= ~(def_flags|SYMBOL_VALID ); + sym->flags &= ~def_flags;switch (sym->type) {case S_INT :case S_HEX :
@@ -398,7 +398,11 @@ int conf_read_simple(const char *name, int def) } } -expr_invalidate_all (); +if (def ==S_DEF_USER ) { +for_all_symbols (sym) + sym->flags &= ~SYMBOL_VALID; +expr_invalidate_all (); + }while (getline_stripped (&line, &line_asize, in) !=-1 ) {struct menu *choice;
@@ -464,6 +468,9 @@ int conf_read_simple(const char *name, int def)if (conf_set_sym_val (sym, def, def_flags, val))continue ; +if (def !=S_DEF_USER ) +continue ; +/* * If this is a choice member, give it the highest priority. * If conflicting CONFIG options are given from an input file,
@@ -967,10 +974,8 @@ static int conf_touch_deps(void) depfile_path[depfile_prefix_len] =0 ;conf_read_simple (name,S_DEF_AUTO ); -sym_calc_value (modules_sym);for_all_symbols (sym) { -sym_calc_value (sym);if (sym_is_choice (sym))continue ;if (sym->flags &SYMBOL_WRITE ) {
@@ -1084,12 +1089,12 @@ int conf_write_autoconf(int overwrite)if (ret)return -1 ; -if (conf_touch_deps ()) -return 1 ; -for_all_symbols (sym)sym_calc_value (sym); +if (conf_touch_deps ()) +return 1 ; + ret =__conf_write_autoconf (conf_get_autoheader_name (), print_symbol_for_c, &comment_style_c);
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 179/783 crypto: octeontx2 - suppress auth failure screaming due to negative tests
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shashank Gupta <[email protected]>
[ Upstream commit 64b7871522a4cba99d092e1c849d6f9092868aaa ]
This patch addresses an issue where authentication failures were being erroneously reported due to negative test failures in the "ccm(aes)" selftest.pr_debug suppress unnecessary screaming of these tests.
--- drivers/crypto/marvell/octeontx2/otx2_cptvf_reqmgr.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/crypto/marvell/octeontx2/otx2_cptvf_reqmgr.c +4 -3
@@ -264,9 +264,10 @@ static int cpt_process_ccode(struct otx2_cptlfs_info *lfs,break ; } -dev_err (&pdev->dev, -"Request failed with software error code 0x%x\n" , - cpt_status->s.uc_compcode); +pr_debug ("Request failed with software error code 0x%x: algo = %s driver = %s\n" , + cpt_status->s.uc_compcode, + info->req->areq->tfm->__crt_alg->cra_name, + info->req->areq->tfm->__crt_alg->cra_driver_name);otx2_cpt_dump_sg_list (pdev, info->req);break ; }
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 180/783 dm: restrict dm device size to 2^63-512 bytes
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Mikulas Patocka <[email protected]>
[ Upstream commit 45fc728515c14f53f6205789de5bfd72a95af3b8 ]
The devices with size >= 2^63 bytes can't be used reliably by userspace because the type off_t is a signed 64-bit integer.
Therefore, we limit the maximum size of a device mapper device to 2^63-512 bytes.
--- drivers/md/dm-table.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/md/dm-table.c +4 -0
@@ -698,6 +698,10 @@ int dm_table_add_target(struct dm_table *t, const char *type,DMERR ("%s: zero-length target" ,dm_device_name (t->md));return -EINVAL ; } +if (start + len < start || start + len >LLONG_MAX >>SECTOR_SHIFT ) { +DMERR ("%s: too large device" ,dm_device_name (t->md)); +return -EINVAL ; + } ti->type =dm_get_target_type (type);if (!ti->type) {
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 181/783 net/smc: use the correct ndev to find pnetid by pnetid table
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Guangguan Wang <[email protected]>
[ Upstream commit bfc6c67ec2d64d0ca4e5cc3e1ac84298a10b8d62 ]
When using smc_pnet in SMC, it will only search the pnetid in the base_ndev of the netdev hierarchy(both HW PNETID and User-defined sw pnetid). This may not work for some scenarios when using SMC in container on cloud environment.
In container, there have choices of different container network, such as directly using host network, virtual network IPVLAN, veth, etc. Different choices of container network have different netdev hierarchy. Examples of netdev hierarchy show below. (eth0 and eth1 in host below is the netdev directly related to the physical device).
_______________________________
| _________________ |
| |POD | |
| | | |
| | eth0_________ | |
| |____| |__| |
| | | |
| | | |
| eth1|base_ndev| eth0_______ |
| | | | RDMA ||
| host |_________| |_______||
---------------------------------
netdev hierarchy if directly using host network
________________________________
| _________________ |
| |POD __________ | |
| | |upper_ndev| | |
| |eth0|__________| | |
| |_______|_________| |
| |lower netdev |
| __|______ |
| eth1| | eth0_______ |
| |base_ndev| | RDMA ||
| host |_________| |_______||
---------------------------------
netdev hierarchy if using IPVLAN
_______________________________
| _____________________ |
| |POD _________ | |
| | |base_ndev|| |
| |eth0(veth)|_________|| |
| |____________|________| |
| |pairs |
| _______|_ |
| | | eth0_______ |
| veth|base_ndev| | RDMA ||
| |_________| |_______||
| _________ |
| eth1|base_ndev| |
| host |_________| |
---------------------------------
netdev hierarchy if using vethDue to some reasons, the eth1 in host is not RDMA attached netdevice, pnetid is needed to map the eth1(in host) with RDMA device so that POD can do SMC-R. Because the eth1(in host) is managed by CNI plugin(such as Terway, network management plugin in container environment), and in cloud environment the eth(in host) can dynamically be inserted by CNI when POD create and dynamically be removed by CNI when POD destroy and no POD related to the eth(in host) anymore. It is hard to config the pnetid to the eth1(in host). But it is easy to config the pnetid to the netdevice which can be seen in POD. When do SMC-R, both the container directly using host network and the container using veth network can successfully match the RDMA device, because the configured pnetid netdev is a base_ndev. But the container using IPVLAN can not successfully match the RDMA device and 0x03030000 fallback happens, because the configured pnetid netdev is not a base_ndev. Additionally, if config pnetid to the eth1(in host) also can not work for matching RDMA device when using veth network and doing SMC-R in POD.
To resolve the problems list above, this patch extends to search user -defined sw pnetid in the clc handshake ndev when no pnetid can be found in the base_ndev, and the base_ndev take precedence over ndev for backward compatibility. This patch also can unify the pnetid setup of different network choices list above in container(Config user-defined sw pnetid in the netdevice can be seen in POD).
--- net/smc/smc_pnet.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
net/smc/smc_pnet.c +5 -3
@@ -1079,14 +1079,16 @@ static void smc_pnet_find_roce_by_pnetid(struct net_device *ndev, struct smc_init_info *ini) {u8 ndev_pnetid[SMC_MAX_PNETID_LEN ]; +struct net_device *base_ndev;struct net *net; - ndev =pnet_find_base_ndev (ndev); + base_ndev =pnet_find_base_ndev (ndev); net =dev_net (ndev); -if (smc_pnetid_by_dev_port (ndev->dev.parent, ndev->dev_port, +if (smc_pnetid_by_dev_port (base_ndev->dev.parent, base_ndev->dev_port, ndev_pnetid) && +smc_pnet_find_ndev_pnetid_by_table (base_ndev, ndev_pnetid) &&smc_pnet_find_ndev_pnetid_by_table (ndev, ndev_pnetid)) { -smc_pnet_find_rdma_dev (ndev, ini); +smc_pnet_find_rdma_dev (base_ndev, ini);return ;/* pnetid could not be determined */ }_smc_pnet_find_roce_by_pnetid (ndev_pnetid, ini,NULL , net);
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 182/783 xen: Add support for XenServer 6.1 platform device
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Frediano Ziglio <[email protected]>
[ Upstream commit 2356f15caefc0cc63d9cc5122641754f76ef9b25 ]
On XenServer on Windows machine a platform device with ID 2 instead of 1 is used.
This device is mainly identical to device 1 but due to some Windows update behaviour it was decided to use a device with a different ID.
This causes compatibility issues with Linux which expects, if Xen is detected, to find a Xen platform device (5853:0001) otherwise code will crash due to some missing initialization (specifically grant tables). Specifically from dmesg
RIP: 0010:gnttab_expand+0x29/0x210
Code: 90 0f 1f 44 00 00 55 31 d2 48 89 e5 41 57 41 56 41 55 41 89 fd
41 54 53 48 83 ec 10 48 8b 05 7e 9a 49 02 44 8b 35 a7 9a 49 02
<8b> 48 04 8d 44 39 ff f7 f1 45 8d 24 06 89 c3 e8 43 fe ff ff
44 39
RSP: 0000:ffffba34c01fbc88 EFLAGS: 00010086
...The device 2 is presented by Xapi adding device specification to Qemu command line.
Message-ID: <[email protected]>
--- drivers/xen/platform-pci.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/xen/platform-pci.c +4 -0
@@ -26,6 +26,8 @@#define DRV_NAME "xen-platform-pci" +#define PCI_DEVICE_ID_XEN_PLATFORM_XS61 0x0002 +static unsigned long platform_mmio;static unsigned long platform_mmio_alloc;static unsigned long platform_mmiolen;
@@ -174,6 +176,8 @@ static int platform_pci_probe(struct pci_dev *pdev,static const struct pci_device_id platform_pci_tbl[] = { {PCI_VENDOR_ID_XEN ,PCI_DEVICE_ID_XEN_PLATFORM ,PCI_ANY_ID ,PCI_ANY_ID ,0 ,0 ,0 }, + {PCI_VENDOR_ID_XEN ,PCI_DEVICE_ID_XEN_PLATFORM_XS61 , +PCI_ANY_ID ,PCI_ANY_ID ,0 ,0 ,0 }, {0 ,} };
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 183/783 pinctrl-tegra: Restore SFSEL bit when freeing pins
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Prathamesh Shete <[email protected]>
[ Upstream commit c12bfa0fee65940b10ff5187349f76c6f6b1df9c ]
Each pin can be configured as a Special Function IO (SFIO) or GPIO, where the SFIO enables the pin to operate in alternative modes such as I2C, SPI, etc.
The current implementation sets all the pins back to SFIO mode even if they were initially in GPIO mode. This can cause glitches on the pins when pinctrl_gpio_free() is called.
Avoid these undesired glitches by storing the pin's SFIO/GPIO state on GPIO request and restoring it on GPIO free.
--- drivers/pinctrl/tegra/pinctrl-tegra.c | 59 +++++++++++++++++++++++---- drivers/pinctrl/tegra/pinctrl-tegra.h | 6 +++ 2 files changed, 57 insertions(+), 8 deletions(-)
drivers/pinctrl/tegra/pinctrl-tegra.c +51 -8
@@ -278,8 +278,8 @@ static int tegra_pinctrl_set_mux(struct pinctrl_dev *pctldev,return 0 ; } -static const struct tegra_pingroup *tegra_pinctrl_get_group (struct pinctrl_dev *pctldev, -unsigned int offset) +static int tegra_pinctrl_get_group_index (struct pinctrl_dev *pctldev, +unsigned int offset) {struct tegra_pmx *pmx =pinctrl_dev_get_drvdata (pctldev);unsigned int group, num_pins, j;
@@ -292,12 +292,35 @@ static const struct tegra_pingroup *tegra_pinctrl_get_group(struct pinctrl_dev *continue ;for (j =0 ; j < num_pins; j++) {if (offset == pins[j]) -return &pmx->soc->groups[group]; +return group; } } -dev_err (pctldev->dev,"Pingroup not found for pin %u\n" , offset); -return NULL ; +return -EINVAL ; +} + +static const struct tegra_pingroup *tegra_pinctrl_get_group (struct pinctrl_dev *pctldev, +unsigned int offset, +int group_index) +{ +struct tegra_pmx *pmx =pinctrl_dev_get_drvdata (pctldev); + +if (group_index <0 || group_index > pmx->soc->ngroups) +return NULL ; + +return &pmx->soc->groups[group_index]; +} + +static struct tegra_pingroup_config *tegra_pinctrl_get_group_config (struct pinctrl_dev *pctldev, +unsigned int offset, +int group_index) +{ +struct tegra_pmx *pmx =pinctrl_dev_get_drvdata (pctldev); + +if (group_index <0 ) +return NULL ; + +return &pmx->pingroup_configs[group_index]; } static int tegra_pinctrl_gpio_request_enable(struct pinctrl_dev *pctldev,
@@ -306,12 +329,15 @@ static int tegra_pinctrl_gpio_request_enable(struct pinctrl_dev *pctldev, {struct tegra_pmx *pmx =pinctrl_dev_get_drvdata (pctldev);const struct tegra_pingroup *group; +struct tegra_pingroup_config *config; +int group_index;u32 value;if (!pmx->soc->sfsel_in_mux)return 0 ; - group =tegra_pinctrl_get_group (pctldev, offset); + group_index =tegra_pinctrl_get_group_index (pctldev, offset); + group =tegra_pinctrl_get_group (pctldev, offset, group_index);if (!group)return -EINVAL ;
@@ -319,7 +345,11 @@ static int tegra_pinctrl_gpio_request_enable(struct pinctrl_dev *pctldev,if (group->mux_reg <0 || group->sfsel_bit <0 )return -EINVAL ; + config =tegra_pinctrl_get_group_config (pctldev, offset, group_index); +if (!config) +return -EINVAL ; value =pmx_readl (pmx, group->mux_bank, group->mux_reg); + config->is_sfsel = (value &BIT (group->sfsel_bit)) !=0 ; value &= ~BIT (group->sfsel_bit);pmx_writel (pmx, value, group->mux_bank, group->mux_reg);
@@ -332,12 +362,15 @@ static void tegra_pinctrl_gpio_disable_free(struct pinctrl_dev *pctldev, {struct tegra_pmx *pmx =pinctrl_dev_get_drvdata (pctldev);const struct tegra_pingroup *group; +struct tegra_pingroup_config *config; +int group_index;u32 value;if (!pmx->soc->sfsel_in_mux)return ; - group =tegra_pinctrl_get_group (pctldev, offset); + group_index =tegra_pinctrl_get_group_index (pctldev, offset); + group =tegra_pinctrl_get_group (pctldev, offset, group_index);if (!group)return ;
@@ -345,8 +378,12 @@ static void tegra_pinctrl_gpio_disable_free(struct pinctrl_dev *pctldev,if (group->mux_reg <0 || group->sfsel_bit <0 )return ; + config =tegra_pinctrl_get_group_config (pctldev, offset, group_index); +if (!config) +return ; value =pmx_readl (pmx, group->mux_bank, group->mux_reg); - value |=BIT (group->sfsel_bit); +if (config->is_sfsel) + value |=BIT (group->sfsel_bit);pmx_writel (pmx, value, group->mux_bank, group->mux_reg); }
@@ -791,6 +828,12 @@ int tegra_pinctrl_probe(struct platform_device *pdev, pmx->dev = &pdev->dev; pmx->soc = soc_data; + pmx->pingroup_configs =devm_kcalloc (&pdev->dev, + pmx->soc->ngroups,sizeof (*pmx->pingroup_configs), +GFP_KERNEL ); +if (!pmx->pingroup_configs) +return -ENOMEM ; +/* * Each mux group will appear in 4 functions' list of groups. * This over-allocates slightly, since not all groups are mux groups.
drivers/pinctrl/tegra/pinctrl-tegra.h +6 -0
@@ -8,6 +8,10 @@ #ifndef __PINMUX_TEGRA_H__ #define __PINMUX_TEGRA_H__ +struct tegra_pingroup_config { + bool is_sfsel; +}; + struct tegra_pmx { struct device *dev; struct pinctrl_dev *pctl;
@@ -21,6 +25,8 @@ struct tegra_pmx {int nbanks;void __iomem **regs;u32 *backup_regs; +/* Array of size soc->ngroups */ +struct tegra_pingroup_config *pingroup_configs; };enum tegra_pinconf_param {
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 184/783 mfd: syscon: Add check for invalid resource size
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eder Zulian <[email protected]>
[ Upstream commit ba09916efb29f80e438a54e634970209ce12750f ]
Add a consistency check to avoid assigning an invalid value to max_register due to a possible DT misconfiguration.
--- drivers/mfd/syscon.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
drivers/mfd/syscon.c +8 -1
@@ -47,6 +47,7 @@ static struct syscon *of_syscon_register(struct device_node *np, bool check_res)struct regmap_config syscon_config = syscon_regmap_config;struct resource res;struct reset_control *reset; +resource_size_t res_size;WARN_ON (!mutex_is_locked (&syscon_list_lock));
@@ -96,6 +97,12 @@ static struct syscon *of_syscon_register(struct device_node *np, bool check_res) } } + res_size =resource_size (&res); +if (res_size < reg_io_width) { + ret = -EFAULT ; + goto err_regmap; + } + syscon_config.name =kasprintf (GFP_KERNEL ,"%pOFn@%pa" , np, &res.start);if (!syscon_config.name) { ret = -ENOMEM ;
@@ -103,7 +110,7 @@ static struct syscon *of_syscon_register(struct device_node *np, bool check_res) } syscon_config.reg_stride = reg_io_width; syscon_config.val_bits = reg_io_width *8 ; - syscon_config.max_register =resource_size (&res) - reg_io_width; + syscon_config.max_register = res_size - reg_io_width;if (!syscon_config.max_register) syscon_config.max_register_is_0 = true;
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 185/783 mfd: tps65219: Remove TPS65219_REG_TI_DEV_ID check
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Shree Ramamoorthy <[email protected]>
[ Upstream commit 76b58d5111fdcffce615beb71520bc7a6f1742c9 ]
The chipid macro/variable and regmap_read function call is not needed because the TPS65219_REG_TI_DEV_ID register value is not a consistent value across TPS65219 PMIC config versions. Reading from the DEV_ID register without a consistent value to compare it to isn't useful. There isn't a way to verify the match data ID is the same ID read from the DEV_ID device register. 0xF0 isn't a DEV_ID value consistent across TPS65219 NVM configurations.
For TPS65215, there is a consistent value in bits 5-0 of the DEV_ID register. However, there are other error checks in place within probe() that apply to both PMICs rather than keeping this isolated check for one PMIC.
--- drivers/mfd/tps65219.c | 7 ------- 1 file changed, 7 deletions(-)
drivers/mfd/tps65219.c +0 -7
@@ -221,7 +221,6 @@ static const struct regmap_irq_chip tps65219_irq_chip = {static int tps65219_probe (struct i2c_client *client) {struct tps65219 *tps; -unsigned int chipid;bool pwr_button;int ret;
@@ -246,12 +245,6 @@ static int tps65219_probe(struct i2c_client *client)if (ret)return ret; - ret =regmap_read (tps->regmap,TPS65219_REG_TI_DEV_ID , &chipid); -if (ret) { -dev_err (tps->dev,"Failed to read device ID: %d\n" , ret); -return ret; - } - ret =devm_mfd_add_devices (tps->dev,PLATFORM_DEVID_AUTO , tps65219_cells,ARRAY_SIZE (tps65219_cells),NULL ,0 ,regmap_irq_get_domain (tps->irq_data));
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 186/783 drm/amdgpu/gfx12: dont read registers in mqd init
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <[email protected]>
[ Upstream commit fc3c139cf0432b79fd08e23100a559ee51cd0be4 ]
Just use the default values. There's not need to get the value from hardware and it could cause problems if we do that at runtime and gfxoff is active.
--- drivers/gpu/drm/amd/amdgpu/gfx_v12_0.c | 48 ++++++++++++++++++-------- 1 file changed, 33 insertions(+), 15 deletions(-)
drivers/gpu/drm/amd/amdgpu/gfx_v12_0.c +33 -15
@@ -52,6 +52,24 @@#define RLCG_UCODE_LOADING_START_ADDRESS 0x00002000L +#define regCP_GFX_MQD_CONTROL_DEFAULT 0x00000100 +#define regCP_GFX_HQD_VMID_DEFAULT 0x00000000 +#define regCP_GFX_HQD_QUEUE_PRIORITY_DEFAULT 0x00000000 +#define regCP_GFX_HQD_QUANTUM_DEFAULT 0x00000a01 +#define regCP_GFX_HQD_CNTL_DEFAULT 0x00f00000 +#define regCP_RB_DOORBELL_CONTROL_DEFAULT 0x00000000 +#define regCP_GFX_HQD_RPTR_DEFAULT 0x00000000 + +#define regCP_HQD_EOP_CONTROL_DEFAULT 0x00000006 +#define regCP_HQD_PQ_DOORBELL_CONTROL_DEFAULT 0x00000000 +#define regCP_MQD_CONTROL_DEFAULT 0x00000100 +#define regCP_HQD_PQ_CONTROL_DEFAULT 0x00308509 +#define regCP_HQD_PQ_DOORBELL_CONTROL_DEFAULT 0x00000000 +#define regCP_HQD_PQ_RPTR_DEFAULT 0x00000000 +#define regCP_HQD_PERSISTENT_STATE_DEFAULT 0x0be05501 +#define regCP_HQD_IB_CONTROL_DEFAULT 0x00300000 + +MODULE_FIRMWARE ("amdgpu/gc_12_0_0_pfp.bin" );MODULE_FIRMWARE ("amdgpu/gc_12_0_0_me.bin" );MODULE_FIRMWARE ("amdgpu/gc_12_0_0_mec.bin" );
@@ -2891,25 +2909,25 @@ static int gfx_v12_0_gfx_mqd_init(struct amdgpu_device *adev, void *m, mqd->cp_mqd_base_addr_hi =upper_32_bits (prop->mqd_gpu_addr);/* set up mqd control */ - tmp =RREG32_SOC15 (GC ,0 , regCP_GFX_MQD_CONTROL); + tmp = regCP_GFX_MQD_CONTROL_DEFAULT; tmp =REG_SET_FIELD (tmp,CP_GFX_MQD_CONTROL ,VMID ,0 ); tmp =REG_SET_FIELD (tmp,CP_GFX_MQD_CONTROL ,PRIV_STATE ,1 ); tmp =REG_SET_FIELD (tmp,CP_GFX_MQD_CONTROL ,CACHE_POLICY ,0 ); mqd->cp_gfx_mqd_control = tmp;/* set up gfx_hqd_vimd with 0x0 to indicate the ring buffer's vmid */ - tmp =RREG32_SOC15 (GC ,0 , regCP_GFX_HQD_VMID); + tmp = regCP_GFX_HQD_VMID_DEFAULT; tmp =REG_SET_FIELD (tmp,CP_GFX_HQD_VMID ,VMID ,0 ); mqd->cp_gfx_hqd_vmid =0 ;/* set up default queue priority level * 0x0 = low priority, 0x1 = high priority */ - tmp =RREG32_SOC15 (GC ,0 , regCP_GFX_HQD_QUEUE_PRIORITY); + tmp = regCP_GFX_HQD_QUEUE_PRIORITY_DEFAULT; tmp =REG_SET_FIELD (tmp,CP_GFX_HQD_QUEUE_PRIORITY ,PRIORITY_LEVEL ,0 ); mqd->cp_gfx_hqd_queue_priority = tmp;/* set up time quantum */ - tmp =RREG32_SOC15 (GC ,0 , regCP_GFX_HQD_QUANTUM); + tmp = regCP_GFX_HQD_QUANTUM_DEFAULT; tmp =REG_SET_FIELD (tmp,CP_GFX_HQD_QUANTUM ,QUANTUM_EN ,1 ); mqd->cp_gfx_hqd_quantum = tmp;
@@ -2931,7 +2949,7 @@ static int gfx_v12_0_gfx_mqd_init(struct amdgpu_device *adev, void *m,/* set up the gfx_hqd_control, similar as CP_RB0_CNTL */ rb_bufsz =order_base_2 (prop->queue_size /4 ) -1 ; - tmp =RREG32_SOC15 (GC ,0 , regCP_GFX_HQD_CNTL); + tmp = regCP_GFX_HQD_CNTL_DEFAULT; tmp =REG_SET_FIELD (tmp,CP_GFX_HQD_CNTL ,RB_BUFSZ , rb_bufsz); tmp =REG_SET_FIELD (tmp,CP_GFX_HQD_CNTL ,RB_BLKSZ , rb_bufsz -2 );#ifdef __BIG_ENDIAN
@@ -2940,7 +2958,7 @@ static int gfx_v12_0_gfx_mqd_init(struct amdgpu_device *adev, void *m, mqd->cp_gfx_hqd_cntl = tmp;/* set up cp_doorbell_control */ - tmp =RREG32_SOC15 (GC ,0 , regCP_RB_DOORBELL_CONTROL); + tmp = regCP_RB_DOORBELL_CONTROL_DEFAULT;if (prop->use_doorbell) { tmp =REG_SET_FIELD (tmp,CP_RB_DOORBELL_CONTROL ,DOORBELL_OFFSET , prop->doorbell_index);
@@ -2952,7 +2970,7 @@ static int gfx_v12_0_gfx_mqd_init(struct amdgpu_device *adev, void *m, mqd->cp_rb_doorbell_control = tmp;/* reset read and write pointers, similar to CP_RB0_WPTR/_RPTR */ - mqd->cp_gfx_hqd_rptr =RREG32_SOC15 (GC ,0 , regCP_GFX_HQD_RPTR); + mqd->cp_gfx_hqd_rptr = regCP_GFX_HQD_RPTR_DEFAULT;/* active the queue */ mqd->cp_gfx_hqd_active =1 ;
@@ -3047,14 +3065,14 @@ static int gfx_v12_0_compute_mqd_init(struct amdgpu_device *adev, void *m, mqd->cp_hqd_eop_base_addr_hi =upper_32_bits (eop_base_addr);/* set the EOP size, register value is 2^(EOP_SIZE+1) dwords */ - tmp =RREG32_SOC15 (GC ,0 , regCP_HQD_EOP_CONTROL); + tmp = regCP_HQD_EOP_CONTROL_DEFAULT; tmp =REG_SET_FIELD (tmp,CP_HQD_EOP_CONTROL ,EOP_SIZE , (order_base_2 (GFX12_MEC_HPD_SIZE /4 ) -1 )); mqd->cp_hqd_eop_control = tmp;/* enable doorbell? */ - tmp =RREG32_SOC15 (GC ,0 , regCP_HQD_PQ_DOORBELL_CONTROL); + tmp = regCP_HQD_PQ_DOORBELL_CONTROL_DEFAULT;if (prop->use_doorbell) { tmp = REG_SET_FIELD(tmp, CP_HQD_PQ_DOORBELL_CONTROL,
@@ -3083,7 +3101,7 @@ static int gfx_v12_0_compute_mqd_init(struct amdgpu_device *adev, void *m, mqd->cp_mqd_base_addr_hi =upper_32_bits (prop->mqd_gpu_addr);/* set MQD vmid to 0 */ - tmp =RREG32_SOC15 (GC ,0 , regCP_MQD_CONTROL); + tmp = regCP_MQD_CONTROL_DEFAULT; tmp =REG_SET_FIELD (tmp,CP_MQD_CONTROL ,VMID ,0 ); mqd->cp_mqd_control = tmp;
@@ -3093,7 +3111,7 @@ static int gfx_v12_0_compute_mqd_init(struct amdgpu_device *adev, void *m, mqd->cp_hqd_pq_base_hi =upper_32_bits (hqd_gpu_addr);/* set up the HQD, this is similar to CP_RB0_CNTL */ - tmp =RREG32_SOC15 (GC ,0 , regCP_HQD_PQ_CONTROL); + tmp = regCP_HQD_PQ_CONTROL_DEFAULT; tmp =REG_SET_FIELD (tmp,CP_HQD_PQ_CONTROL ,QUEUE_SIZE , (order_base_2 (prop->queue_size /4 ) -1 )); tmp = REG_SET_FIELD(tmp, CP_HQD_PQ_CONTROL, RPTR_BLOCK_SIZE,
@@ -3118,7 +3136,7 @@ static int gfx_v12_0_compute_mqd_init(struct amdgpu_device *adev, void *m, tmp =0 ;/* enable the doorbell if requested */ if (prop->use_doorbell) { - tmp =RREG32_SOC15 (GC ,0 , regCP_HQD_PQ_DOORBELL_CONTROL); + tmp = regCP_HQD_PQ_DOORBELL_CONTROL_DEFAULT; tmp =REG_SET_FIELD (tmp,CP_HQD_PQ_DOORBELL_CONTROL ,DOORBELL_OFFSET , prop->doorbell_index);
@@ -3133,17 +3151,17 @@ static int gfx_v12_0_compute_mqd_init(struct amdgpu_device *adev, void *m, mqd->cp_hqd_pq_doorbell_control = tmp;/* reset read and write pointers, similar to CP_RB0_WPTR/_RPTR */ - mqd->cp_hqd_pq_rptr =RREG32_SOC15 (GC ,0 , regCP_HQD_PQ_RPTR); + mqd->cp_hqd_pq_rptr = regCP_HQD_PQ_RPTR_DEFAULT;/* set the vmid for the queue */ mqd->cp_hqd_vmid =0 ; - tmp =RREG32_SOC15 (GC ,0 , regCP_HQD_PERSISTENT_STATE); + tmp = regCP_HQD_PERSISTENT_STATE_DEFAULT; tmp =REG_SET_FIELD (tmp,CP_HQD_PERSISTENT_STATE ,PRELOAD_SIZE ,0x55 ); mqd->cp_hqd_persistent_state = tmp;/* set MIN_IB_AVAIL_SIZE */ - tmp =RREG32_SOC15 (GC ,0 , regCP_HQD_IB_CONTROL); + tmp = regCP_HQD_IB_CONTROL_DEFAULT; tmp =REG_SET_FIELD (tmp,CP_HQD_IB_CONTROL ,MIN_IB_AVAIL_SIZE ,3 ); mqd->cp_hqd_ib_control = tmp;
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 187/783 drm/amdgpu/gfx11: dont read registers in mqd init
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Alex Deucher <[email protected]>
[ Upstream commit e27b36ea6ba5f29e91fcfb375ea29503708fcf43 ]
Just use the default values. There's not need to get the value from hardware and it could cause problems if we do that at runtime and gfxoff is active.
--- drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c | 47 ++++++++++++++++++-------- 1 file changed, 32 insertions(+), 15 deletions(-)
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c +32 -15
@@ -64,6 +64,23 @@#define regPC_CONFIG_CNTL_1 0x194d#define regPC_CONFIG_CNTL_1_BASE_IDX 1 +#define regCP_GFX_MQD_CONTROL_DEFAULT 0x00000100 +#define regCP_GFX_HQD_VMID_DEFAULT 0x00000000 +#define regCP_GFX_HQD_QUEUE_PRIORITY_DEFAULT 0x00000000 +#define regCP_GFX_HQD_QUANTUM_DEFAULT 0x00000a01 +#define regCP_GFX_HQD_CNTL_DEFAULT 0x00a00000 +#define regCP_RB_DOORBELL_CONTROL_DEFAULT 0x00000000 +#define regCP_GFX_HQD_RPTR_DEFAULT 0x00000000 + +#define regCP_HQD_EOP_CONTROL_DEFAULT 0x00000006 +#define regCP_HQD_PQ_DOORBELL_CONTROL_DEFAULT 0x00000000 +#define regCP_MQD_CONTROL_DEFAULT 0x00000100 +#define regCP_HQD_PQ_CONTROL_DEFAULT 0x00308509 +#define regCP_HQD_PQ_DOORBELL_CONTROL_DEFAULT 0x00000000 +#define regCP_HQD_PQ_RPTR_DEFAULT 0x00000000 +#define regCP_HQD_PERSISTENT_STATE_DEFAULT 0x0be05501 +#define regCP_HQD_IB_CONTROL_DEFAULT 0x00300000 +MODULE_FIRMWARE ("amdgpu/gc_11_0_0_pfp.bin" );MODULE_FIRMWARE ("amdgpu/gc_11_0_0_me.bin" );MODULE_FIRMWARE ("amdgpu/gc_11_0_0_mec.bin" );
@@ -3958,7 +3975,7 @@ static void gfx_v11_0_gfx_mqd_set_priority(struct amdgpu_device *adev,if (prop->hqd_pipe_priority ==AMDGPU_GFX_PIPE_PRIO_HIGH ) priority =1 ; - tmp =RREG32_SOC15 (GC ,0 , regCP_GFX_HQD_QUEUE_PRIORITY); + tmp = regCP_GFX_HQD_QUEUE_PRIORITY_DEFAULT; tmp =REG_SET_FIELD (tmp,CP_GFX_HQD_QUEUE_PRIORITY ,PRIORITY_LEVEL , priority); mqd->cp_gfx_hqd_queue_priority = tmp; }
@@ -3980,14 +3997,14 @@ static int gfx_v11_0_gfx_mqd_init(struct amdgpu_device *adev, void *m, mqd->cp_mqd_base_addr_hi =upper_32_bits (prop->mqd_gpu_addr);/* set up mqd control */ - tmp =RREG32_SOC15 (GC ,0 , regCP_GFX_MQD_CONTROL); + tmp = regCP_GFX_MQD_CONTROL_DEFAULT; tmp =REG_SET_FIELD (tmp,CP_GFX_MQD_CONTROL ,VMID ,0 ); tmp =REG_SET_FIELD (tmp,CP_GFX_MQD_CONTROL ,PRIV_STATE ,1 ); tmp =REG_SET_FIELD (tmp,CP_GFX_MQD_CONTROL ,CACHE_POLICY ,0 ); mqd->cp_gfx_mqd_control = tmp;/* set up gfx_hqd_vimd with 0x0 to indicate the ring buffer's vmid */ - tmp =RREG32_SOC15 (GC ,0 , regCP_GFX_HQD_VMID); + tmp = regCP_GFX_HQD_VMID_DEFAULT; tmp =REG_SET_FIELD (tmp,CP_GFX_HQD_VMID ,VMID ,0 ); mqd->cp_gfx_hqd_vmid =0 ;
@@ -3995,7 +4012,7 @@ static int gfx_v11_0_gfx_mqd_init(struct amdgpu_device *adev, void *m,gfx_v11_0_gfx_mqd_set_priority (adev, mqd, prop);/* set up time quantum */ - tmp =RREG32_SOC15 (GC ,0 , regCP_GFX_HQD_QUANTUM); + tmp = regCP_GFX_HQD_QUANTUM_DEFAULT; tmp =REG_SET_FIELD (tmp,CP_GFX_HQD_QUANTUM ,QUANTUM_EN ,1 ); mqd->cp_gfx_hqd_quantum = tmp;
@@ -4017,7 +4034,7 @@ static int gfx_v11_0_gfx_mqd_init(struct amdgpu_device *adev, void *m,/* set up the gfx_hqd_control, similar as CP_RB0_CNTL */ rb_bufsz =order_base_2 (prop->queue_size /4 ) -1 ; - tmp =RREG32_SOC15 (GC ,0 , regCP_GFX_HQD_CNTL); + tmp = regCP_GFX_HQD_CNTL_DEFAULT; tmp =REG_SET_FIELD (tmp,CP_GFX_HQD_CNTL ,RB_BUFSZ , rb_bufsz); tmp =REG_SET_FIELD (tmp,CP_GFX_HQD_CNTL ,RB_BLKSZ , rb_bufsz -2 );#ifdef __BIG_ENDIAN
@@ -4026,7 +4043,7 @@ static int gfx_v11_0_gfx_mqd_init(struct amdgpu_device *adev, void *m, mqd->cp_gfx_hqd_cntl = tmp;/* set up cp_doorbell_control */ - tmp =RREG32_SOC15 (GC ,0 , regCP_RB_DOORBELL_CONTROL); + tmp = regCP_RB_DOORBELL_CONTROL_DEFAULT;if (prop->use_doorbell) { tmp =REG_SET_FIELD (tmp,CP_RB_DOORBELL_CONTROL ,DOORBELL_OFFSET , prop->doorbell_index);
@@ -4038,7 +4055,7 @@ static int gfx_v11_0_gfx_mqd_init(struct amdgpu_device *adev, void *m, mqd->cp_rb_doorbell_control = tmp;/* reset read and write pointers, similar to CP_RB0_WPTR/_RPTR */ - mqd->cp_gfx_hqd_rptr =RREG32_SOC15 (GC ,0 , regCP_GFX_HQD_RPTR); + mqd->cp_gfx_hqd_rptr = regCP_GFX_HQD_RPTR_DEFAULT;/* active the queue */ mqd->cp_gfx_hqd_active =1 ;
@@ -4124,14 +4141,14 @@ static int gfx_v11_0_compute_mqd_init(struct amdgpu_device *adev, void *m, mqd->cp_hqd_eop_base_addr_hi =upper_32_bits (eop_base_addr);/* set the EOP size, register value is 2^(EOP_SIZE+1) dwords */ - tmp =RREG32_SOC15 (GC ,0 , regCP_HQD_EOP_CONTROL); + tmp = regCP_HQD_EOP_CONTROL_DEFAULT; tmp =REG_SET_FIELD (tmp,CP_HQD_EOP_CONTROL ,EOP_SIZE , (order_base_2 (GFX11_MEC_HPD_SIZE /4 ) -1 )); mqd->cp_hqd_eop_control = tmp;/* enable doorbell? */ - tmp =RREG32_SOC15 (GC ,0 , regCP_HQD_PQ_DOORBELL_CONTROL); + tmp = regCP_HQD_PQ_DOORBELL_CONTROL_DEFAULT;if (prop->use_doorbell) { tmp = REG_SET_FIELD(tmp, CP_HQD_PQ_DOORBELL_CONTROL,
@@ -4160,7 +4177,7 @@ static int gfx_v11_0_compute_mqd_init(struct amdgpu_device *adev, void *m, mqd->cp_mqd_base_addr_hi =upper_32_bits (prop->mqd_gpu_addr);/* set MQD vmid to 0 */ - tmp =RREG32_SOC15 (GC ,0 , regCP_MQD_CONTROL); + tmp = regCP_MQD_CONTROL_DEFAULT; tmp =REG_SET_FIELD (tmp,CP_MQD_CONTROL ,VMID ,0 ); mqd->cp_mqd_control = tmp;
@@ -4170,7 +4187,7 @@ static int gfx_v11_0_compute_mqd_init(struct amdgpu_device *adev, void *m, mqd->cp_hqd_pq_base_hi =upper_32_bits (hqd_gpu_addr);/* set up the HQD, this is similar to CP_RB0_CNTL */ - tmp =RREG32_SOC15 (GC ,0 , regCP_HQD_PQ_CONTROL); + tmp = regCP_HQD_PQ_CONTROL_DEFAULT; tmp =REG_SET_FIELD (tmp,CP_HQD_PQ_CONTROL ,QUEUE_SIZE , (order_base_2 (prop->queue_size /4 ) -1 )); tmp = REG_SET_FIELD(tmp, CP_HQD_PQ_CONTROL, RPTR_BLOCK_SIZE,
@@ -4196,7 +4213,7 @@ static int gfx_v11_0_compute_mqd_init(struct amdgpu_device *adev, void *m, tmp =0 ;/* enable the doorbell if requested */ if (prop->use_doorbell) { - tmp =RREG32_SOC15 (GC ,0 , regCP_HQD_PQ_DOORBELL_CONTROL); + tmp = regCP_HQD_PQ_DOORBELL_CONTROL_DEFAULT; tmp =REG_SET_FIELD (tmp,CP_HQD_PQ_DOORBELL_CONTROL ,DOORBELL_OFFSET , prop->doorbell_index);
@@ -4211,17 +4228,17 @@ static int gfx_v11_0_compute_mqd_init(struct amdgpu_device *adev, void *m, mqd->cp_hqd_pq_doorbell_control = tmp;/* reset read and write pointers, similar to CP_RB0_WPTR/_RPTR */ - mqd->cp_hqd_pq_rptr =RREG32_SOC15 (GC ,0 , regCP_HQD_PQ_RPTR); + mqd->cp_hqd_pq_rptr = regCP_HQD_PQ_RPTR_DEFAULT;/* set the vmid for the queue */ mqd->cp_hqd_vmid =0 ; - tmp =RREG32_SOC15 (GC ,0 , regCP_HQD_PERSISTENT_STATE); + tmp = regCP_HQD_PERSISTENT_STATE_DEFAULT; tmp =REG_SET_FIELD (tmp,CP_HQD_PERSISTENT_STATE ,PRELOAD_SIZE ,0x55 ); mqd->cp_hqd_persistent_state = tmp;/* set MIN_IB_AVAIL_SIZE */ - tmp =RREG32_SOC15 (GC ,0 , regCP_HQD_IB_CONTROL); + tmp = regCP_HQD_IB_CONTROL_DEFAULT; tmp =REG_SET_FIELD (tmp,CP_HQD_IB_CONTROL ,MIN_IB_AVAIL_SIZE ,3 ); mqd->cp_hqd_ib_control = tmp;
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 188/783 drm/amdgpu: Update SRIOV video codec caps
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Rosca <[email protected]>
[ Upstream commit 19478f2011f8b53dee401c91423c4e0b73753e4f ]
There have been multiple fixes to the video caps that are missing for SRIOV. Update the SRIOV caps with correct values.
--- drivers/gpu/drm/amd/amdgpu/nv.c | 16 ++++++++-------- drivers/gpu/drm/amd/amdgpu/soc21.c | 10 ++-------- 2 files changed, 10 insertions(+), 16 deletions(-)
drivers/gpu/drm/amd/amdgpu/nv.c +8 -8
@@ -141,23 +141,23 @@ static struct amdgpu_video_codec_info sriov_sc_video_codecs_encode_array[] = { };static struct amdgpu_video_codec_info sriov_sc_video_codecs_decode_array_vcn0[] = { - {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG2 ,4096 ,4096 ,3 )}, - {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4 ,4096 ,4096 ,5 )}, + {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG2 ,1920 ,1088 ,3 )}, + {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4 ,1920 ,1088 ,5 )}, {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4_AVC ,4096 ,4096 ,52 )}, - {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VC1 ,4096 ,4096 ,4 )}, + {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VC1 ,1920 ,1088 ,4 )}, {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_HEVC ,8192 ,4352 ,186 )}, - {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_JPEG ,4096 ,4096 ,0 )}, + {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_JPEG ,16384 ,16384 ,0 )}, {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VP9 ,8192 ,4352 ,0 )}, {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_AV1 ,8192 ,4352 ,0 )}, };static struct amdgpu_video_codec_info sriov_sc_video_codecs_decode_array_vcn1[] = { - {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG2 ,4096 ,4096 ,3 )}, - {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4 ,4096 ,4096 ,5 )}, + {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG2 ,1920 ,1088 ,3 )}, + {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4 ,1920 ,1088 ,5 )}, {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4_AVC ,4096 ,4096 ,52 )}, - {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VC1 ,4096 ,4096 ,4 )}, + {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VC1 ,1920 ,1088 ,4 )}, {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_HEVC ,8192 ,4352 ,186 )}, - {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_JPEG ,4096 ,4096 ,0 )}, + {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_JPEG ,16384 ,16384 ,0 )}, {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VP9 ,8192 ,4352 ,0 )}, };
drivers/gpu/drm/amd/amdgpu/soc21.c +2 -8
@@ -117,23 +117,17 @@ static struct amdgpu_video_codecs sriov_vcn_4_0_0_video_codecs_encode_vcn1 = { };static struct amdgpu_video_codec_info sriov_vcn_4_0_0_video_codecs_decode_array_vcn0[] = { - {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG2 ,4096 ,4096 ,3 )}, - {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4 ,4096 ,4096 ,5 )}, {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4_AVC ,4096 ,4096 ,52 )}, - {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VC1 ,4096 ,4096 ,4 )}, {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_HEVC ,8192 ,4352 ,186 )}, - {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_JPEG ,4096 ,4096 ,0 )}, + {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_JPEG ,16384 ,16384 ,0 )}, {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VP9 ,8192 ,4352 ,0 )}, {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_AV1 ,8192 ,4352 ,0 )}, };static struct amdgpu_video_codec_info sriov_vcn_4_0_0_video_codecs_decode_array_vcn1[] = { - {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG2 ,4096 ,4096 ,3 )}, - {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4 ,4096 ,4096 ,5 )}, {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_MPEG4_AVC ,4096 ,4096 ,52 )}, - {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VC1 ,4096 ,4096 ,4 )}, {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_HEVC ,8192 ,4352 ,186 )}, - {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_JPEG ,4096 ,4096 ,0 )}, + {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_JPEG ,16384 ,16384 ,0 )}, {codec_info_build (AMDGPU_INFO_VIDEO_CAPS_CODEC_IDX_VP9 ,8192 ,4352 ,0 )}, };
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 189/783 ASoC: sun4i-codec: support hp-det-gpios property
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ryan Walklin <[email protected]>
[ Upstream commit a149377c033afe6557c50892ebbfc0e8b7e2e253 ]
Add support for GPIO headphone detection with the hp-det-gpios property. In order for this to properly disable the path upon removal of headphones, the output must be labelled Headphone which is a common sink in the driver.
Describe a headphone jack and detection GPIO in the driver, check for a corresponding device tree node, and enable jack detection in a new machine init function if described.
--
Changelog v1..v2:
- Separate DAPM changes into separate patch and add rationale.
--- sound/soc/sunxi/sun4i-codec.c | 53 +++++++++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+)
sound/soc/sunxi/sun4i-codec.c +53 -0
@@ -22,6 +22,7 @@#include <linux/gpio/consumer.h> #include <sound/core.h> +#include <sound/jack.h> #include <sound/pcm.h> #include <sound/pcm_params.h> #include <sound/soc.h>
@@ -331,6 +332,7 @@ struct sun4i_codec {struct clk *clk_module;struct reset_control *rst;struct gpio_desc *gpio_pa; +struct gpio_desc *gpio_hp;/* ADC_FIFOC register is at different offset on different SoCs */ struct regmap_field *reg_adc_fifoc;
@@ -1583,6 +1585,49 @@ static struct snd_soc_dai_driver dummy_cpu_dai = { .ops = &dummy_dai_ops, }; +static struct snd_soc_jack sun4i_headphone_jack; + +static struct snd_soc_jack_pin sun4i_headphone_jack_pins[] = { + { .pin ="Headphone" , .mask =SND_JACK_HEADPHONE }, +}; + +static struct snd_soc_jack_gpio sun4i_headphone_jack_gpio = { + .name ="hp-det" , + .report =SND_JACK_HEADPHONE , + .debounce_time =150 , +}; + +static int sun4i_codec_machine_init (struct snd_soc_pcm_runtime *rtd) +{ +struct snd_soc_card *card = rtd->card; +struct sun4i_codec *scodec =snd_soc_card_get_drvdata (card); +int ret; + +if (scodec->gpio_hp) { + ret =snd_soc_card_jack_new_pins (card,"Headphone Jack" , +SND_JACK_HEADPHONE , + &sun4i_headphone_jack, + sun4i_headphone_jack_pins, +ARRAY_SIZE (sun4i_headphone_jack_pins)); +if (ret) { +dev_err (rtd->dev, +"Headphone jack creation failed: %d\n" , ret); +return ret; + } + + sun4i_headphone_jack_gpio.desc = scodec->gpio_hp; + ret =snd_soc_jack_add_gpios (&sun4i_headphone_jack,1 , + &sun4i_headphone_jack_gpio); + +if (ret) { +dev_err (rtd->dev,"Headphone GPIO not added: %d\n" , ret); +return ret; + } + } + +return 0 ; +} +static struct snd_soc_dai_link *sun4i_codec_create_link (struct device *dev,int *num_links) {
@@ -1608,6 +1653,7 @@ static struct snd_soc_dai_link *sun4i_codec_create_link(struct device *dev, link->codecs->name =dev_name (dev); link->platforms->name =dev_name (dev); link->dai_fmt =SND_SOC_DAIFMT_I2S ; + link->init = sun4i_codec_machine_init; *num_links =1 ;
@@ -2301,6 +2347,13 @@ static int sun4i_codec_probe(struct platform_device *pdev)return ret; } + scodec->gpio_hp =devm_gpiod_get_optional (&pdev->dev,"hp-det" ,GPIOD_IN ); +if (IS_ERR (scodec->gpio_hp)) { + ret =PTR_ERR (scodec->gpio_hp); +dev_err_probe (&pdev->dev, ret,"Failed to get hp-det gpio\n" ); +return ret; + } +/* reg_field setup */ scodec->reg_adc_fifoc = devm_regmap_field_alloc(&pdev->dev, scodec->regmap,
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 190/783 ASoC: sun4i-codec: correct dapm widgets and controls for h616
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ryan Walklin <[email protected]>
[ Upstream commit ae5f76d4044d1580849316c49290678605e0889d ]
The previous H616 support patch added a single LINEOUT DAPM pin switch to the card controls. As the codec in this SoC only has a single route, this seemed reasonable at the time, however is redundant given the existing DAPM codec widget definitions controlling the digital and analog sides of the codec.
It is also insufficient to describe the scenario where separate components (muxes, jack detection etc) are used to modify the audio route external to the SoC. For example the Anbernic RG(##)XX series of devices uses a headphone jack detection switch, GPIO-controlled speaker amplifier and a passive external mux chip to route audio.
Remove the redundant LINEOUT card control, and add a Speaker pin switch control and Headphone DAPM widget to allow control of the above hardware.
--- sound/soc/sunxi/sun4i-codec.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
sound/soc/sunxi/sun4i-codec.c +2 -1
@@ -1962,10 +1962,11 @@ static const struct snd_soc_component_driver sun50i_h616_codec_codec = { };static const struct snd_kcontrol_new sun50i_h616_card_controls[] = { -SOC_DAPM_PIN_SWITCH ("LINEOUT" ), +SOC_DAPM_PIN_SWITCH ("Speaker" ), };static const struct snd_soc_dapm_widget sun50i_h616_codec_card_dapm_widgets[] = { +SND_SOC_DAPM_HP ("Headphone" ,NULL ),SND_SOC_DAPM_LINE ("Line Out" ,NULL ),SND_SOC_DAPM_SPK ("Speaker" , sun4i_codec_spk_event), };
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 191/783 clk: qcom: lpassaudiocc-sc7280: Add support for LPASS resets for QCM6490
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Taniya Das <[email protected]>
[ Upstream commit cdbbc480f4146cb659af97f4020601fde5fb65a7 ]
On the QCM6490 boards, the LPASS firmware controls the complete clock controller functionalities and associated power domains. However, only the LPASS resets required to be controlled by the high level OS. Thus, add support for the resets in the clock driver to enable the Audio SW driver to assert/deassert the audio resets as needed.
--- drivers/clk/qcom/lpassaudiocc-sc7280.c | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-)
drivers/clk/qcom/lpassaudiocc-sc7280.c +19 -4
@@ -1,6 +1,7 @@// SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2021, The Linux Foundation. All rights reserved. +* Copyright (c) 2025, Qualcomm Innovation Center, Inc. All rights reserved. */ #include <linux/clk-provider.h>
@@ -713,14 +714,24 @@ static const struct qcom_reset_map lpass_audio_cc_sc7280_resets[] = { [LPASS_AUDIO_SWR_WSA_CGCR] = { 0xb0, 1 }, }; +static const struct regmap_config lpass_audio_cc_sc7280_reset_regmap_config = { + .name ="lpassaudio_cc_reset" , + .reg_bits =32 , + .reg_stride =4 , + .val_bits =32 , + .fast_io = true, + .max_register =0xc8 , +}; +static const struct qcom_cc_desc lpass_audio_cc_reset_sc7280_desc = { - .config = &lpass_audio_cc_sc7280_regmap_config, + .config = &lpass_audio_cc_sc7280_reset_regmap_config, .resets = lpass_audio_cc_sc7280_resets, .num_resets =ARRAY_SIZE (lpass_audio_cc_sc7280_resets), };static const struct of_device_id lpass_audio_cc_sc7280_match_table[] = { - { .compatible ="qcom,sc7280-lpassaudiocc" }, + { .compatible ="qcom,qcm6490-lpassaudiocc" , .data = &lpass_audio_cc_reset_sc7280_desc }, + { .compatible ="qcom,sc7280-lpassaudiocc" , .data = &lpass_audio_cc_sc7280_desc }, { } };MODULE_DEVICE_TABLE (of, lpass_audio_cc_sc7280_match_table);
@@ -752,13 +763,17 @@ static int lpass_audio_cc_sc7280_probe(struct platform_device *pdev)struct regmap *regmap;int ret; + desc =device_get_match_data (&pdev->dev); + +if (of_device_is_compatible (pdev->dev.of_node,"qcom,qcm6490-lpassaudiocc" )) +return qcom_cc_probe_by_index (pdev,1 , desc); + ret =lpass_audio_setup_runtime_pm (pdev);if (ret)return ret; lpass_audio_cc_sc7280_regmap_config.name ="lpassaudio_cc" ; lpass_audio_cc_sc7280_regmap_config.max_register =0x2f000 ; - desc = &lpass_audio_cc_sc7280_desc; regmap =qcom_cc_map (pdev, desc);if (IS_ERR (regmap)) {
@@ -772,7 +787,7 @@ static int lpass_audio_cc_sc7280_probe(struct platform_device *pdev)regmap_write (regmap,0x4 ,0x3b );regmap_write (regmap,0x8 ,0xff05 ); - ret =qcom_cc_really_probe (&pdev->dev, &lpass_audio_cc_sc7280_desc, regmap); + ret =qcom_cc_really_probe (&pdev->dev, desc, regmap);if (ret) {dev_err (&pdev->dev,"Failed to register LPASS AUDIO CC clocks\n" ); goto exit;
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 192/783 leds: Kconfig: leds-st1202: Add select for required LEDS_TRIGGER_PATTERN
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Manuel Fombuena <[email protected]>
[ Upstream commit be2f92844d0f8cb059cb6958c6d9582d381ca68e ]
leds-st1202 requires the LED Pattern Trigger (LEDS_TRIGGER_PATTERN), which is not selected when LED Trigger support is (LEDS_TRIGGERS).
To reproduce this:
- make menuconfig KCONFIG_CONFIG=
- select LEDS_ST1202 dependencies OF, I2C and LEDS_CLASS.
- select LEDS_ST1202
- LEDS_TRIGGERS is selected but LEDS_TRIGGER_PATTERN isn't.
The absence of LEDS_TRIGGER_PATTERN explicitly required can lead to builds in which LEDS_ST1202 is selected while LEDS_TRIGGER_PATTERN isn't. The direct result of that would be that /sys/class/leds/<led>/hw_pattern wouldn't be available and there would be no way of interacting with the driver and hardware from user space.
Add select LEDS_TRIGGER_PATTERN to Kconfig to meet the requirement and indirectly document it as well.
--- drivers/leds/Kconfig | 1 + 1 file changed, 1 insertion(+)
drivers/leds/Kconfig +1 -0
@@ -971,6 +971,7 @@ config LEDS_ST1202 depends on I2C depends on OF select LEDS_TRIGGERS + select LEDS_TRIGGER_PATTERN help Say Y to enable support for LEDs connected to LED1202 LED driver chips accessed via the I2C bus.
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 193/783 leds: leds-st1202: Initialize hardware before DT node child operations
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Manuel Fombuena <[email protected]>
[ Upstream commit a17d9e736ddd78323e77d3066c1e86371a99023c ]
Arguably, there are more chances of errors occurring during the initialization of the hardware, so this should complete successfully before the devicetree node's children are initialized.
st1202_dt_init() fills the led_classdev struct.
st1202_setup() initializes the hardware. Specifically, resets the chip, enables its phase-shift delay feature, enables the device and disables all the LEDs channels. All that writing to registers, with no input from st1202_dt_init().
Real-world testing corroborates that calling st1202_setup() before st1202_dt_init() doesn't cause any issue during initialization.
Switch the order of st1202_dt_init() and st1202_setup() to ensure the hardware is correctly initialized before the led_classdev struct is filled.
--- drivers/leds/leds-st1202.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/leds/leds-st1202.c +2 -2
@@ -350,11 +350,11 @@ static int st1202_probe(struct i2c_client *client)return ret; chip->client = client; - ret =st1202_dt_init (chip); + ret =st1202_setup (chip);if (ret <0 )return ret; - ret =st1202_setup (chip); + ret =st1202_dt_init (chip);if (ret <0 )return ret;
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 194/783 ext4: reject the data_err=abort option in nojournal mode
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Baokun Li <[email protected]>
[ Upstream commit 26343ca0df715097065b02a6cddb4a029d5b9327 ]
data_err=abort aborts the journal on I/O errors. However, this option is meaningless if journal is disabled, so it is rejected in nojournal mode to reduce unnecessary checks. Also, this option is ignored upon remount.
--- fs/ext4/super.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
fs/ext4/super.c +12 -0
@@ -2785,6 +2785,13 @@ static int ext4_check_opt_consistency(struct fs_context *fc, }if (is_remount) { +if (!sbi->s_journal && +ctx_test_mount_opt (ctx,EXT4_MOUNT_DATA_ERR_ABORT )) { +ext4_msg (NULL ,KERN_WARNING , +"Remounting fs w/o journal so ignoring data_err option" ); +ctx_clear_mount_opt (ctx,EXT4_MOUNT_DATA_ERR_ABORT ); + } +if (ctx_test_mount_opt (ctx,EXT4_MOUNT_DAX_ALWAYS ) && (test_opt (sb,DATA_FLAGS ) ==EXT4_MOUNT_JOURNAL_DATA )) { ext4_msg(NULL, KERN_ERR, "can't mount with "
@@ -5428,6 +5435,11 @@ static int __ext4_fill_super(struct fs_context *fc, struct super_block *sb) "data=, fs mounted w/o journal"); goto failed_mount3a; } +if (test_opt (sb,DATA_ERR_ABORT )) { +ext4_msg (sb,KERN_ERR , +"can't mount with data_err=abort, fs mounted w/o journal" ); + goto failed_mount3a; + } sbi->s_def_mount_opt &= ~EXT4_MOUNT_JOURNAL_CHECKSUM ;clear_opt (sb,JOURNAL_CHECKSUM );clear_opt (sb,DATA_FLAGS );
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 195/783 ext4: do not convert the unwritten extents if data writeback fails
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Baokun Li <[email protected]>
[ Upstream commit e856f93e0fb249955f7d5efb18fe20500a9ccc6d ]
When dioread_nolock is turned on (the default), it will convert unwritten extents to written at ext4_end_io_end(), even if the data writeback fails.
It leads to the possibility that stale data may be exposed when the physical block corresponding to the file data is read-only (i.e., writes return -EIO, but reads are normal).
Therefore a new ext4_io_end->flags EXT4_IO_END_FAILED is added, which indicates that some bio write-back failed in the current ext4_io_end. When this flag is set, the unwritten to written conversion is no longer performed. Users can read the data normally until the caches are dropped, after that, the failed extents can only be read to all 0.
--- fs/ext4/ext4.h | 3 ++- fs/ext4/page-io.c | 16 ++++++++++++++-- 2 files changed, 16 insertions(+), 3 deletions(-)
fs/ext4/ext4.h +2 -1
@@ -278,7 +278,8 @@ struct ext4_system_blocks {/* * Flags for ext4_io_end->flags */ -#define EXT4_IO_END_UNWRITTEN 0x0001 +#define EXT4_IO_END_UNWRITTEN 0x0001 +#define EXT4_IO_END_FAILED 0x0002struct ext4_io_end_vec {struct list_head list;/* list of io_end_vec */
fs/ext4/page-io.c +14 -2
@@ -181,14 +181,25 @@ static int ext4_end_io_end(ext4_io_end_t *io_end)"list->prev 0x%p\n" , io_end, inode->i_ino, io_end->list.next, io_end->list.prev); - io_end->handle =NULL ;/* Following call will use up the handle */ - ret =ext4_convert_unwritten_io_end_vec (handle, io_end); +/* +* Do not convert the unwritten extents if data writeback fails, +* or stale data may be exposed. +*/ + io_end->handle =NULL ;/* Following call will use up the handle */ +if (unlikely (io_end->flag &EXT4_IO_END_FAILED )) { + ret = -EIO ; +if (handle) +jbd2_journal_free_reserved (handle); + }else { + ret =ext4_convert_unwritten_io_end_vec (handle, io_end); + }if (ret <0 && !ext4_forced_shutdown (inode->i_sb)) {ext4_msg (inode->i_sb,KERN_EMERG ,"failed to convert unwritten extents to written " "extents -- potential data loss! " "(inode %lu, error %d)" , inode->i_ino, ret); } +ext4_clear_io_unwritten_flag (io_end);ext4_release_io_end (io_end);return ret;
@@ -344,6 +355,7 @@ static void ext4_end_bio(struct bio *bio) bio->bi_status, inode->i_ino, (unsigned long long ) bi_sector >> (inode->i_blkbits - 9)); + io_end->flag |=EXT4_IO_END_FAILED ;mapping_set_error (inode->i_mapping,blk_status_to_errno (bio->bi_status)); }
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 196/783 RDMA/uverbs: Propagate errors from rdma_lookup_get_uobject()
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Maher Sanalla <[email protected]>
[ Upstream commit 81f8f7454ad9e0bf95efdec6542afdc9a6ab1e24 ]
Currently, the IB uverbs API calls uobj_get_uobj_read(), which in turn uses the rdma_lookup_get_uobject() helper to retrieve user objects. In case of failure, uobj_get_uobj_read() returns NULL, overriding the error code from rdma_lookup_get_uobject(). The IB uverbs API then translates this NULL to -EINVAL, masking the actual error and complicating debugging. For example, applications calling ibv_modify_qp that fails with EBUSY when retrieving the QP uobject will see the overridden error code EINVAL instead, masking the actual error.
Furthermore, based on rdma-core commit:
"2a22f1ced5f3 ("Merge pull request #1568 from jakemoroni/master")" Kernel's IB uverbs return values are either ignored and passed on as is to application or overridden with other errnos in a few cases.
Thus, to improve error reporting and debuggability, propagate the original error from rdma_lookup_get_uobject() instead of replacing it with EINVAL.
--- drivers/infiniband/core/uverbs_cmd.c | 144 ++++++++++++++------------- include/rdma/uverbs_std_types.h | 2 +- 2 files changed, 77 insertions(+), 69 deletions(-)
drivers/infiniband/core/uverbs_cmd.c +76 -68
@@ -716,8 +716,8 @@ static int ib_uverbs_reg_mr(struct uverbs_attr_bundle *attrs) goto err_free; pd =uobj_get_obj_read (pd,UVERBS_OBJECT_PD , cmd.pd_handle, attrs); -if (!pd) { - ret = -EINVAL ; +if (IS_ERR (pd)) { + ret =PTR_ERR (pd); goto err_free; }
@@ -807,8 +807,8 @@ static int ib_uverbs_rereg_mr(struct uverbs_attr_bundle *attrs)if (cmd.flags &IB_MR_REREG_PD ) { new_pd =uobj_get_obj_read (pd,UVERBS_OBJECT_PD , cmd.pd_handle, attrs); -if (!new_pd) { - ret = -EINVAL ; +if (IS_ERR (new_pd)) { + ret =PTR_ERR (new_pd); goto put_uobjs; } }else {
@@ -917,8 +917,8 @@ static int ib_uverbs_alloc_mw(struct uverbs_attr_bundle *attrs)return PTR_ERR (uobj); pd =uobj_get_obj_read (pd,UVERBS_OBJECT_PD , cmd.pd_handle, attrs); -if (!pd) { - ret = -EINVAL ; +if (IS_ERR (pd)) { + ret =PTR_ERR (pd); goto err_free; }
@@ -1125,8 +1125,8 @@ static int ib_uverbs_resize_cq(struct uverbs_attr_bundle *attrs)return ret; cq =uobj_get_obj_read (cq,UVERBS_OBJECT_CQ , cmd.cq_handle, attrs); -if (!cq) -return -EINVAL ; +if (IS_ERR (cq)) +return PTR_ERR (cq); ret = cq->device->ops.resize_cq (cq, cmd.cqe, &attrs->driver_udata);if (ret)
@@ -1187,8 +1187,8 @@ static int ib_uverbs_poll_cq(struct uverbs_attr_bundle *attrs)return ret; cq =uobj_get_obj_read (cq,UVERBS_OBJECT_CQ , cmd.cq_handle, attrs); -if (!cq) -return -EINVAL ; +if (IS_ERR (cq)) +return PTR_ERR (cq);/* we copy a struct ib_uverbs_poll_cq_resp to user space */ header_ptr = attrs->ucore.outbuf;
@@ -1236,8 +1236,8 @@ static int ib_uverbs_req_notify_cq(struct uverbs_attr_bundle *attrs)return ret; cq =uobj_get_obj_read (cq,UVERBS_OBJECT_CQ , cmd.cq_handle, attrs); -if (!cq) -return -EINVAL ; +if (IS_ERR (cq)) +return PTR_ERR (cq);ib_req_notify_cq (cq, cmd.solicited_only ?IB_CQ_SOLICITED :IB_CQ_NEXT_COMP );
@@ -1319,8 +1319,8 @@ static int create_qp(struct uverbs_attr_bundle *attrs, ind_tbl =uobj_get_obj_read (rwq_ind_table,UVERBS_OBJECT_RWQ_IND_TBL , cmd->rwq_ind_tbl_handle, attrs); -if (!ind_tbl) { - ret = -EINVAL ; +if (IS_ERR (ind_tbl)) { + ret =PTR_ERR (ind_tbl); goto err_put; }
@@ -1358,8 +1358,10 @@ static int create_qp(struct uverbs_attr_bundle *attrs,if (cmd->is_srq) { srq =uobj_get_obj_read (srq,UVERBS_OBJECT_SRQ , cmd->srq_handle, attrs); -if (!srq || srq->srq_type ==IB_SRQT_XRC ) { - ret = -EINVAL ; +if (IS_ERR (srq) || + srq->srq_type ==IB_SRQT_XRC ) { + ret =IS_ERR (srq) ?PTR_ERR (srq) : + -EINVAL ; goto err_put; } }
@@ -1369,23 +1371,29 @@ static int create_qp(struct uverbs_attr_bundle *attrs, rcq =uobj_get_obj_read ( cq,UVERBS_OBJECT_CQ , cmd->recv_cq_handle, attrs); -if (!rcq) { - ret = -EINVAL ; +if (IS_ERR (rcq)) { + ret =PTR_ERR (rcq); goto err_put; } } } } -if (has_sq) +if (has_sq) { scq =uobj_get_obj_read (cq,UVERBS_OBJECT_CQ , cmd->send_cq_handle, attrs); +if (IS_ERR (scq)) { + ret =PTR_ERR (scq); + goto err_put; + } + } +if (!ind_tbl && cmd->qp_type !=IB_QPT_XRC_INI ) rcq = rcq ?: scq; pd =uobj_get_obj_read (pd,UVERBS_OBJECT_PD , cmd->pd_handle, attrs); -if (!pd || (!scq && has_sq)) { - ret = -EINVAL ; +if (IS_ERR (pd)) { + ret =PTR_ERR (pd); goto err_put; }
@@ -1480,18 +1488,18 @@ static int create_qp(struct uverbs_attr_bundle *attrs, err_put:if (!IS_ERR (xrcd_uobj))uobj_put_read (xrcd_uobj); -if (pd) +if (!IS_ERR_OR_NULL (pd))uobj_put_obj_read (pd); -if (scq) +if (!IS_ERR_OR_NULL (scq))rdma_lookup_put_uobject (&scq->uobject->uevent.uobject,UVERBS_LOOKUP_READ ); -if (rcq && rcq != scq) +if (!IS_ERR_OR_NULL (rcq) && rcq != scq)rdma_lookup_put_uobject (&rcq->uobject->uevent.uobject,UVERBS_LOOKUP_READ ); -if (srq) +if (!IS_ERR_OR_NULL (srq))rdma_lookup_put_uobject (&srq->uobject->uevent.uobject,UVERBS_LOOKUP_READ ); -if (ind_tbl) +if (!IS_ERR_OR_NULL (ind_tbl))uobj_put_obj_read (ind_tbl);uobj_alloc_abort (&obj->uevent.uobject, attrs);
@@ -1653,8 +1661,8 @@ static int ib_uverbs_query_qp(struct uverbs_attr_bundle *attrs) } qp =uobj_get_obj_read (qp,UVERBS_OBJECT_QP , cmd.qp_handle, attrs); -if (!qp) { - ret = -EINVAL ; +if (IS_ERR (qp)) { + ret =PTR_ERR (qp); goto out; }
@@ -1759,8 +1767,8 @@ static int modify_qp(struct uverbs_attr_bundle *attrs, qp =uobj_get_obj_read (qp,UVERBS_OBJECT_QP , cmd->base.qp_handle, attrs); -if (!qp) { - ret = -EINVAL ; +if (IS_ERR (qp)) { + ret =PTR_ERR (qp); goto out; }
@@ -2026,8 +2034,8 @@ static int ib_uverbs_post_send(struct uverbs_attr_bundle *attrs)return -ENOMEM ; qp =uobj_get_obj_read (qp,UVERBS_OBJECT_QP , cmd.qp_handle, attrs); -if (!qp) { - ret = -EINVAL ; +if (IS_ERR (qp)) { + ret =PTR_ERR (qp); goto out; }
@@ -2064,9 +2072,9 @@ static int ib_uverbs_post_send(struct uverbs_attr_bundle *attrs) ud->ah =uobj_get_obj_read (ah,UVERBS_OBJECT_AH , user_wr->wr.ud.ah, attrs); -if (!ud->ah) { +if (IS_ERR (ud->ah)) { + ret =PTR_ERR (ud->ah);kfree (ud); - ret = -EINVAL ; goto out_put; } ud->remote_qpn = user_wr->wr.ud.remote_qpn;
@@ -2303,8 +2311,8 @@ static int ib_uverbs_post_recv(struct uverbs_attr_bundle *attrs)return PTR_ERR (wr); qp =uobj_get_obj_read (qp,UVERBS_OBJECT_QP , cmd.qp_handle, attrs); -if (!qp) { - ret = -EINVAL ; +if (IS_ERR (qp)) { + ret =PTR_ERR (qp); goto out; }
@@ -2354,8 +2362,8 @@ static int ib_uverbs_post_srq_recv(struct uverbs_attr_bundle *attrs)return PTR_ERR (wr); srq =uobj_get_obj_read (srq,UVERBS_OBJECT_SRQ , cmd.srq_handle, attrs); -if (!srq) { - ret = -EINVAL ; +if (IS_ERR (srq)) { + ret =PTR_ERR (srq); goto out; }
@@ -2411,8 +2419,8 @@ static int ib_uverbs_create_ah(struct uverbs_attr_bundle *attrs) } pd =uobj_get_obj_read (pd,UVERBS_OBJECT_PD , cmd.pd_handle, attrs); -if (!pd) { - ret = -EINVAL ; +if (IS_ERR (pd)) { + ret =PTR_ERR (pd); goto err; }
@@ -2481,8 +2489,8 @@ static int ib_uverbs_attach_mcast(struct uverbs_attr_bundle *attrs)return ret; qp =uobj_get_obj_read (qp,UVERBS_OBJECT_QP , cmd.qp_handle, attrs); -if (!qp) -return -EINVAL ; +if (IS_ERR (qp)) +return PTR_ERR (qp); obj = qp->uobject;
@@ -2531,8 +2539,8 @@ static int ib_uverbs_detach_mcast(struct uverbs_attr_bundle *attrs)return ret; qp =uobj_get_obj_read (qp,UVERBS_OBJECT_QP , cmd.qp_handle, attrs); -if (!qp) -return -EINVAL ; +if (IS_ERR (qp)) +return PTR_ERR (qp); obj = qp->uobject;mutex_lock (&obj->mcast_lock);
@@ -2666,8 +2674,8 @@ static int kern_spec_to_ib_spec_action(struct uverbs_attr_bundle *attrs,UVERBS_OBJECT_FLOW_ACTION , kern_spec->action.handle, attrs); -if (!ib_spec->action.act) -return -EINVAL ; +if (IS_ERR (ib_spec->action.act)) +return PTR_ERR (ib_spec->action.act); ib_spec->action.size =sizeof (struct ib_flow_spec_action_handle ); flow_resources_add(uflow_res,
@@ -2684,8 +2692,8 @@ static int kern_spec_to_ib_spec_action(struct uverbs_attr_bundle *attrs,UVERBS_OBJECT_COUNTERS , kern_spec->flow_count.handle, attrs); -if (!ib_spec->flow_count.counters) -return -EINVAL ; +if (IS_ERR (ib_spec->flow_count.counters)) +return PTR_ERR (ib_spec->flow_count.counters); ib_spec->flow_count.size =sizeof (struct ib_flow_spec_action_count ); flow_resources_add(uflow_res,
@@ -2903,14 +2911,14 @@ static int ib_uverbs_ex_create_wq(struct uverbs_attr_bundle *attrs)return PTR_ERR (obj); pd =uobj_get_obj_read (pd,UVERBS_OBJECT_PD , cmd.pd_handle, attrs); -if (!pd) { - err = -EINVAL ; +if (IS_ERR (pd)) { + err =PTR_ERR (pd); goto err_uobj; } cq =uobj_get_obj_read (cq,UVERBS_OBJECT_CQ , cmd.cq_handle, attrs); -if (!cq) { - err = -EINVAL ; +if (IS_ERR (cq)) { + err =PTR_ERR (cq); goto err_put_pd; }
@@ -3011,8 +3019,8 @@ static int ib_uverbs_ex_modify_wq(struct uverbs_attr_bundle *attrs)return -EINVAL ; wq =uobj_get_obj_read (wq,UVERBS_OBJECT_WQ , cmd.wq_handle, attrs); -if (!wq) -return -EINVAL ; +if (IS_ERR (wq)) +return PTR_ERR (wq);if (cmd.attr_mask &IB_WQ_FLAGS ) { wq_attr.flags = cmd.flags;
@@ -3095,8 +3103,8 @@ static int ib_uverbs_ex_create_rwq_ind_table(struct uverbs_attr_bundle *attrs) num_read_wqs++) { wq =uobj_get_obj_read (wq,UVERBS_OBJECT_WQ , wqs_handles[num_read_wqs], attrs); -if (!wq) { - err = -EINVAL ; +if (IS_ERR (wq)) { + err =PTR_ERR (wq); goto put_wqs; }
@@ -3251,8 +3259,8 @@ static int ib_uverbs_ex_create_flow(struct uverbs_attr_bundle *attrs) } qp =uobj_get_obj_read (qp,UVERBS_OBJECT_QP , cmd.qp_handle, attrs); -if (!qp) { - err = -EINVAL ; +if (IS_ERR (qp)) { + err =PTR_ERR (qp); goto err_uobj; }
@@ -3398,15 +3406,15 @@ static int __uverbs_create_xsrq(struct uverbs_attr_bundle *attrs,if (ib_srq_has_cq (cmd->srq_type)) { attr.ext.cq =uobj_get_obj_read (cq,UVERBS_OBJECT_CQ , cmd->cq_handle, attrs); -if (!attr.ext.cq) { - ret = -EINVAL ; +if (IS_ERR (attr.ext.cq)) { + ret =PTR_ERR (attr.ext.cq); goto err_put_xrcd; } } pd =uobj_get_obj_read (pd,UVERBS_OBJECT_PD , cmd->pd_handle, attrs); -if (!pd) { - ret = -EINVAL ; +if (IS_ERR (pd)) { + ret =PTR_ERR (pd); goto err_put_cq; }
@@ -3513,8 +3521,8 @@ static int ib_uverbs_modify_srq(struct uverbs_attr_bundle *attrs)return ret; srq =uobj_get_obj_read (srq,UVERBS_OBJECT_SRQ , cmd.srq_handle, attrs); -if (!srq) -return -EINVAL ; +if (IS_ERR (srq)) +return PTR_ERR (srq); attr.max_wr = cmd.max_wr; attr.srq_limit = cmd.srq_limit;
@@ -3541,8 +3549,8 @@ static int ib_uverbs_query_srq(struct uverbs_attr_bundle *attrs)return ret; srq =uobj_get_obj_read (srq,UVERBS_OBJECT_SRQ , cmd.srq_handle, attrs); -if (!srq) -return -EINVAL ; +if (IS_ERR (srq)) +return PTR_ERR (srq); ret =ib_query_srq (srq, &attr);
@@ -3667,8 +3675,8 @@ static int ib_uverbs_ex_modify_cq(struct uverbs_attr_bundle *attrs)return -EOPNOTSUPP ; cq =uobj_get_obj_read (cq,UVERBS_OBJECT_CQ , cmd.cq_handle, attrs); -if (!cq) -return -EINVAL ; +if (IS_ERR (cq)) +return PTR_ERR (cq); ret =rdma_set_cq_moderation (cq, cmd.attr.cq_count, cmd.attr.cq_period);
include/rdma/uverbs_std_types.h +1 -1
@@ -34,7 +34,7 @@static inline void *_uobj_get_obj_read (struct ib_uobject *uobj) {if (IS_ERR (uobj)) -return NULL ; +return ERR_CAST (uobj);return uobj->object; }#define uobj_get_obj_read (_object, _type, _id, _attrs) \
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 197/783 posix-timers: Add cond_resched() to posix_timer_add() search loop
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Eric Dumazet <[email protected]>
[ Upstream commit 5f2909c6cd13564a07ae692a95457f52295c4f22 ]
With a large number of POSIX timers the search for a valid ID might cause a soft lockup on PREEMPT_NONE/VOLUNTARY kernels.
Add cond_resched() to the loop to prevent that.
[ tglx: Split out from Eric's series ]
--- kernel/time/posix-timers.c | 1 + 1 file changed, 1 insertion(+)
kernel/time/posix-timers.c +1 -0
@@ -118,6 +118,7 @@ static int posix_timer_add(struct k_itimer *timer)return id; }spin_unlock (&hash_lock); +cond_resched (); }/* POSIX return code when no timer ID could be allocated */ return -EAGAIN ;
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 198/783 posix-timers: Ensure that timer initialization is fully visible
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Gleixner <[email protected]>
[ Upstream commit 2389c6efd3ad8edb3bcce0019b4edcc7d9c7de19 ]
Frederic pointed out that the memory operations to initialize the timer are not guaranteed to be visible, when __lock_timer() observes timer::it_signal valid under timer::it_lock:
T0 T1
--------- -----------
do_timer_create()
// A
new_timer->.... = ....
spin_lock(current->sighand)
// B
WRITE_ONCE(new_timer->it_signal, current->signal)
spin_unlock(current->sighand)
sys_timer_*()
t = __lock_timer()
spin_lock(&timr->it_lock)
// observes B
if (timr->it_signal == current->signal)
return timr;
if (!t)
return;
// Is not guaranteed to observe AProtect the write of timer::it_signal, which makes the timer valid, with timer::it_lock as well. This guarantees that T1 must observe the initialization A completely, when it observes the valid signal pointer under timer::it_lock. sighand::siglock must still be taken to protect the signal::posix_timers list.
--- kernel/time/posix-timers.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-)
kernel/time/posix-timers.c +14 -7
@@ -463,14 +463,21 @@ static int do_timer_create(clockid_t which_clock, struct sigevent *event,if (error) goto out; -spin_lock_irq (¤t->sighand->siglock); -/* This makes the timer valid in the hash table */ -WRITE_ONCE (new_timer->it_signal, current->signal); -hlist_add_head (&new_timer->list, ¤t->signal->posix_timers); -spin_unlock_irq (¤t->sighand->siglock);/* -* After unlocking sighand::siglock @new_timer is subject to -* concurrent removal and cannot be touched anymore +* timer::it_lock ensures that __lock_timer() observes a fully +* initialized timer when it observes a valid timer::it_signal. +* +* sighand::siglock is required to protect signal::posix_timers. +*/ + scoped_guard (spinlock_irq, &new_timer->it_lock) { +guard (spinlock)(¤t->sighand->siglock); +/* This makes the timer valid in the hash table */ +WRITE_ONCE (new_timer->it_signal, current->signal); +hlist_add_head (&new_timer->list, ¤t->signal->posix_timers); + } +/* +* After unlocking @new_timer is subject to concurrent removal and +* cannot be touched anymore */ return 0 ; out:
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 199/783 net: stmmac: dwmac-rk: Validate GRF and peripheral GRF during probe
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jonas Karlman <[email protected]>
[ Upstream commit 247e84f66a3d1946193d739fec5dc3d69833fd00 ]
All Rockchip GMAC variants typically write to GRF regs to control e.g. interface mode, speed and MAC rx/tx delay. Newer SoCs such as RK3576 and RK3588 use a mix of GRF and peripheral GRF regs. These syscon regmaps is located with help of a rockchip,grf and rockchip,php-grf phandle.
However, validating the rockchip,grf and rockchip,php-grf syscon regmap is deferred until e.g. interface mode or speed is configured, inside the individual SoC specific operations.
Change to validate the rockchip,grf and rockchip,php-grf syscon regmap at probe time to simplify all SoC specific operations.
This should not introduce any backward compatibility issues as all GMAC nodes have been added together with a rockchip,grf phandle (and rockchip,php-grf where required) in their initial commit.
--- .../net/ethernet/stmicro/stmmac/dwmac-rk.c | 21 +++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c +19 -2
@@ -33,6 +33,7 @@ struct rk_gmac_ops {void (*set_clock_selection)(struct rk_priv_data *bsp_priv,bool input,bool enable);void (*integrated_phy_powerup)(struct rk_priv_data *bsp_priv); +bool php_grf_required;bool regs_valid;u32 regs[]; };
@@ -1254,6 +1255,7 @@ static const struct rk_gmac_ops rk3576_ops = { .set_rgmii_speed = rk3576_set_gmac_speed, .set_rmii_speed = rk3576_set_gmac_speed, .set_clock_selection = rk3576_set_clock_selection, + .php_grf_required = true, .regs_valid = true, .regs = { 0x2a220000, /* gmac0 */
@@ -1401,6 +1403,7 @@ static const struct rk_gmac_ops rk3588_ops = { .set_rgmii_speed = rk3588_set_gmac_speed, .set_rmii_speed = rk3588_set_gmac_speed, .set_clock_selection = rk3588_set_clock_selection, + .php_grf_required = true, .regs_valid = true, .regs = { 0xfe1b0000, /* gmac0 */
@@ -1812,8 +1815,22 @@ static struct rk_priv_data *rk_gmac_setup(struct platform_device *pdev, bsp_priv->grf =syscon_regmap_lookup_by_phandle (dev->of_node,"rockchip,grf" ); - bsp_priv->php_grf =syscon_regmap_lookup_by_phandle (dev->of_node, -"rockchip,php-grf" ); +if (IS_ERR (bsp_priv->grf)) { +dev_err_probe (dev,PTR_ERR (bsp_priv->grf), +"failed to lookup rockchip,grf\n" ); +return ERR_CAST (bsp_priv->grf); + } + +if (ops->php_grf_required) { + bsp_priv->php_grf = +syscon_regmap_lookup_by_phandle (dev->of_node, +"rockchip,php-grf" ); +if (IS_ERR (bsp_priv->php_grf)) { +dev_err_probe (dev,PTR_ERR (bsp_priv->php_grf), +"failed to lookup rockchip,php-grf\n" ); +return ERR_CAST (bsp_priv->php_grf); + } + }if (plat->phy_node) { bsp_priv->integrated_phy = of_property_read_bool(plat->phy_node,
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 200/783 net: hsr: Fix PRP duplicate detection
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Jaakko Karrenpalo <[email protected]>
[ Upstream commit 05fd00e5e7b1ac60d264f72423fba38cc382b447 ]
Add PRP specific function for handling duplicate packets. This is needed because of potential L2 802.1p prioritization done by network switches.
The L2 prioritization can re-order the PRP packets from a node causing the existing implementation to discard the frame(s) that have been received 'late' because the sequence number is before the previous received packet. This can happen if the node is sending multiple frames back-to-back with different priority.
--- net/hsr/hsr_device.c | 2 + net/hsr/hsr_forward.c | 4 +- net/hsr/hsr_framereg.c | 95 ++++++++++++++++++++++++++++++++++++++++-- net/hsr/hsr_framereg.h | 8 +++- net/hsr/hsr_main.h | 2 + 5 files changed, 104 insertions(+), 7 deletions(-)
net/hsr/hsr_device.c +2 -0
@@ -616,6 +616,7 @@ static struct hsr_proto_ops hsr_ops = { .drop_frame = hsr_drop_frame, .fill_frame_info = hsr_fill_frame_info, .invalid_dan_ingress_frame = hsr_invalid_dan_ingress_frame, + .register_frame_out = hsr_register_frame_out, };static struct hsr_proto_ops prp_ops = {
@@ -626,6 +627,7 @@ static struct hsr_proto_ops prp_ops = { .fill_frame_info = prp_fill_frame_info, .handle_san_frame = prp_handle_san_frame, .update_san_info = prp_update_san_info, + .register_frame_out = prp_register_frame_out, };void hsr_dev_setup (struct net_device *dev)
net/hsr/hsr_forward.c +2 -2
@@ -536,8 +536,8 @@ static void hsr_forward_do(struct hsr_frame_info *frame)* Also for SAN, this shouldn't be done. */ if (!frame->is_from_san && -hsr_register_frame_out (port, frame->node_src, - frame->sequence_nr)) + hsr->proto_ops->register_frame_out && + hsr->proto_ops->register_frame_out (port, frame))continue ; if (frame->is_supervision && port->type == HSR_PT_MASTER &&
net/hsr/hsr_framereg.c +92 -3
121 lines not on this page · raw message
net/hsr/hsr_framereg.h +6 -2
@@ -44,8 +44,7 @@ void hsr_addr_subst_dest(struct hsr_node *node_src, struct sk_buff *skb,void hsr_register_frame_in (struct hsr_node *node,struct hsr_port *port,u16 sequence_nr); -int hsr_register_frame_out (struct hsr_port *port,struct hsr_node *node, -u16 sequence_nr); +int hsr_register_frame_out (struct hsr_port *port,struct hsr_frame_info *frame);void hsr_prune_nodes (struct timer_list *t);void hsr_prune_proxy_nodes (struct timer_list *t);
@@ -73,6 +72,8 @@ void prp_update_san_info(struct hsr_node *node, bool is_sup);bool hsr_is_node_in_db (struct list_head *node_db,const unsigned char addr[ETH_ALEN ]); +int prp_register_frame_out (struct hsr_port *port,struct hsr_frame_info *frame); +struct hsr_node {struct list_head mac_list;/* Protect R/W access to seq_out */
@@ -89,6 +90,9 @@ struct hsr_node {bool san_b;u16 seq_out[HSR_PT_PORTS ];bool removed; +/* PRP specific duplicate handling */ +u16 seq_expected[HSR_PT_PORTS ]; +u16 seq_start[HSR_PT_PORTS ];struct rcu_head rcu_head; };
net/hsr/hsr_main.h +2 -0
@@ -175,6 +175,8 @@ struct hsr_proto_ops { struct hsr_frame_info *frame);bool (*invalid_dan_ingress_frame)(__be16 protocol);void (*update_san_info)(struct hsr_node *node,bool is_sup); +int (*register_frame_out)(struct hsr_port *port, +struct hsr_frame_info *frame); };struct hsr_self_node {
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 201/783 timer_list: Dont use %pK through printk()
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Thomas Weißschuh <[email protected]>
[ Upstream commit a52067c24ccf6ee4c85acffa0f155e9714f9adce ]
This reverts commit f590308536db ("timer debug: Hide kernel addresses via %pK in /proc/timer_list")
The timer list helper SEQ_printf() uses either the real seq_printf() for procfs output or vprintk() to print to the kernel log, when invoked from SysRq-q. It uses %pK for printing pointers.
In the past %pK was prefered over %p as it would not leak raw pointer values into the kernel log. Since commit ad67b74d2469 ("printk: hash addresses printed with %p") the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used through printk(). They can still unintentionally leak raw pointers or acquire sleeping looks in atomic contexts.
Switch to the regular pointer formatting which is safer, easier to reason about and sufficient here.
--- kernel/time/timer_list.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
kernel/time/timer_list.c +2 -2
@@ -46,7 +46,7 @@ static void print_timer(struct seq_file *m, struct hrtimer *taddr, struct hrtimer *timer, int idx, u64 now) { - SEQ_printf(m, " #%d: <%pK>, %ps", idx, taddr, timer->function); + SEQ_printf(m, " #%d: <%p>, %ps", idx, taddr, timer->function);SEQ_printf (m,", S:%02x" , timer->state);SEQ_printf (m,"\n" ); SEQ_printf(m, " # expires at %Lu-%Lu nsecs [in %Ld to %Ld nsecs]\n",
@@ -98,7 +98,7 @@ print_active_timers(struct seq_file *m, struct hrtimer_clock_base *base,static void print_base (struct seq_file *m,struct hrtimer_clock_base *base,u64 now) { -SEQ_printf (m," .base: %pK\n" , base); +SEQ_printf (m," .base: %p\n" , base);SEQ_printf (m," .index: %d\n" , base->index);SEQ_printf (m," .resolution: %u nsecs\n" , hrtimer_resolution);
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 202/783 wifi: rtw89: coex: Fix coexistence report not show as expected
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ching-Te Ku <[email protected]>
[ Upstream commit a36230aa5f5efceaf5f81682673732a921b91518 ]
This report will feedback some basic information from firmware(PTA counter, report counter, mailbox counter etc). And the report version need to match driver & firmware both side. The original logic break the switch case logic before driver update the report version. It made the report can not be parsed correctly. Delete the break at the version 7 and 8.
Add logic to count C2H event report.
--- drivers/net/wireless/realtek/rtw89/coex.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/net/wireless/realtek/rtw89/coex.c +1 -2
@@ -1372,11 +1372,9 @@ static u32 _chk_btc_report(struct rtw89_dev *rtwdev, }else if (ver->fcxbtcrpt ==8 ) { pfinfo = &pfwinfo->rpt_ctrl.finfo.v8; pcinfo->req_len =sizeof (pfwinfo->rpt_ctrl.finfo.v8); -break ; }else if (ver->fcxbtcrpt ==7 ) { pfinfo = &pfwinfo->rpt_ctrl.finfo.v7; pcinfo->req_len =sizeof (pfwinfo->rpt_ctrl.finfo.v7); -break ; }else { goto err; }
@@ -8115,6 +8113,7 @@ void rtw89_btc_c2h_handle(struct rtw89_dev *rtwdev, struct sk_buff *skb,return ; func =rtw89_btc_c2h_get_index_by_ver (rtwdev, func); + pfwinfo->cnt_c2h++;switch (func) {case BTF_EVNT_BUF_OVERFLOW :
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 203/783 wifi: rtw89: set force HE TB mode when connecting to 11ax AP
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dian-Syuan Yang <[email protected]>
[ Upstream commit a9b56f219a0fa550f92e65ac58443a7892380e09 ]
Some of 11ax AP set the UL HE-SIG-A2 reserved subfield to all 0s, which will cause the 11be chip to recognize trigger frame as EHT. We propose a method to bypass the "UL HE-SIG-A2 reserved subfield" and always uses HE TB in response to the AP's trigger frame.
--- drivers/net/wireless/realtek/rtw89/mac.c | 26 +++++++++++++++++++ drivers/net/wireless/realtek/rtw89/mac.h | 2 ++ drivers/net/wireless/realtek/rtw89/mac80211.c | 1 + drivers/net/wireless/realtek/rtw89/reg.h | 4 +++ 4 files changed, 33 insertions(+)
drivers/net/wireless/realtek/rtw89/mac.c +26 -0
@@ -4826,6 +4826,32 @@ void rtw89_mac_set_he_obss_narrow_bw_ru(struct rtw89_dev *rtwdev,rtw89_write32_set (rtwdev, reg, mac->narrow_bw_ru_dis.mask); } +void rtw89_mac_set_he_tb (struct rtw89_dev *rtwdev, +struct rtw89_vif_link *rtwvif_link) +{ +struct ieee80211_bss_conf *bss_conf; +bool set; +u32 reg; + +if (rtwdev->chip->chip_gen !=RTW89_CHIP_BE ) +return ; + +rcu_read_lock (); + + bss_conf =rtw89_vif_rcu_dereference_link (rtwvif_link, true); + set = bss_conf->he_support && !bss_conf->eht_support; + +rcu_read_unlock (); + + reg =rtw89_mac_reg_by_idx (rtwdev,R_BE_CLIENT_OM_CTRL , + rtwvif_link->mac_idx); + +if (set) +rtw89_write32_set (rtwdev, reg,B_BE_TRIG_DIS_EHTTB ); +else +rtw89_write32_clr (rtwdev, reg,B_BE_TRIG_DIS_EHTTB ); +} +void rtw89_mac_stop_ap (struct rtw89_dev *rtwdev,struct rtw89_vif_link *rtwvif_link) {rtw89_mac_port_cfg_func_sw (rtwdev, rtwvif_link);
drivers/net/wireless/realtek/rtw89/mac.h +2 -0
@@ -1185,6 +1185,8 @@ void rtw89_mac_port_cfg_rx_sync(struct rtw89_dev *rtwdev, struct rtw89_vif_link *rtwvif_link, bool en);void rtw89_mac_set_he_obss_narrow_bw_ru (struct rtw89_dev *rtwdev,struct rtw89_vif_link *rtwvif_link); +void rtw89_mac_set_he_tb (struct rtw89_dev *rtwdev, +struct rtw89_vif_link *rtwvif_link);void rtw89_mac_stop_ap (struct rtw89_dev *rtwdev,struct rtw89_vif_link *rtwvif_link);void rtw89_mac_enable_beacon_for_ap_vifs (struct rtw89_dev *rtwdev,bool en);int rtw89_mac_remove_vif (struct rtw89_dev *rtwdev,struct rtw89_vif_link *vif);
drivers/net/wireless/realtek/rtw89/mac80211.c +1 -0
@@ -670,6 +670,7 @@ static void __rtw89_ops_bss_link_assoc(struct rtw89_dev *rtwdev,rtw89_chip_cfg_txpwr_ul_tb_offset (rtwdev, rtwvif_link);rtw89_mac_port_update (rtwdev, rtwvif_link);rtw89_mac_set_he_obss_narrow_bw_ru (rtwdev, rtwvif_link); +rtw89_mac_set_he_tb (rtwdev, rtwvif_link); } static void __rtw89_ops_bss_assoc(struct rtw89_dev *rtwdev,
drivers/net/wireless/realtek/rtw89/reg.h +4 -0
@@ -7095,6 +7095,10 @@#define B_BE_MACLBK_RDY_NUM_MASK GENMASK(7, 3)#define B_BE_MACLBK_EN BIT(0) +#define R_BE_CLIENT_OM_CTRL 0x11040 +#define R_BE_CLIENT_OM_CTRL_C1 0x15040 +#define B_BE_TRIG_DIS_EHTTB BIT(24) +#define R_BE_WMAC_NAV_CTL 0x11080#define R_BE_WMAC_NAV_CTL_C1 0x15080#define B_BE_WMAC_NAV_UPPER_EN BIT(26)
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 204/783 netfilter: conntrack: Bound nf_conntrack sysctl writes
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Nicolas Bouchinet <[email protected]>
[ Upstream commit 8b6861390ffee6b8ed78b9395e3776c16fec6579 ]
nf_conntrack_max and nf_conntrack_expect_max sysctls were authorized to be written any negative value, which would then be stored in the unsigned int variables nf_conntrack_max and nf_ct_expect_max variables.
While the do_proc_dointvec_conv function is supposed to limit writing handled by proc_dointvec proc_handler to INT_MAX. Such a negative value being written in an unsigned int leads to a very high value, exceeding this limit.
Moreover, the nf_conntrack_expect_max sysctl documentation specifies the minimum value is 1.
The proc_handlers have thus been updated to proc_dointvec_minmax in order to specify the following write bounds :
* Bound nf_conntrack_max sysctl writings between SYSCTL_ZERO and SYSCTL_INT_MAX.
* Bound nf_conntrack_expect_max sysctl writings between SYSCTL_ONE and SYSCTL_INT_MAX as defined in the sysctl documentation.
With this patch applied, sysctl writes outside the defined in the bound will thus lead to a write error :
``` sysctl -w net.netfilter.nf_conntrack_expect_max=-1 sysctl: setting key "net.netfilter.nf_conntrack_expect_max": Invalid argument ```
--- net/netfilter/nf_conntrack_standalone.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
net/netfilter/nf_conntrack_standalone.c +9 -3
@@ -618,7 +618,9 @@ static struct ctl_table nf_ct_sysctl_table[] = { .data = &nf_conntrack_max, .maxlen = sizeof(int), .mode = 0644, - .proc_handler = proc_dointvec, + .proc_handler = proc_dointvec_minmax, + .extra1 = SYSCTL_ZERO, + .extra2 = SYSCTL_INT_MAX, }, [NF_SYSCTL_CT_COUNT] = { .procname = "nf_conntrack_count",
@@ -654,7 +656,9 @@ static struct ctl_table nf_ct_sysctl_table[] = { .data = &nf_ct_expect_max, .maxlen = sizeof(int), .mode = 0644, - .proc_handler = proc_dointvec, + .proc_handler = proc_dointvec_minmax, + .extra1 = SYSCTL_ONE, + .extra2 = SYSCTL_INT_MAX, }, [NF_SYSCTL_CT_ACCT] = { .procname = "nf_conntrack_acct",
@@ -947,7 +951,9 @@ static struct ctl_table nf_ct_netfilter_table[] = { .data = &nf_conntrack_max, .maxlen = sizeof(int), .mode = 0644, - .proc_handler = proc_dointvec, + .proc_handler = proc_dointvec_minmax, + .extra1 = SYSCTL_ZERO, + .extra2 = SYSCTL_INT_MAX, }, };
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 205/783 PNP: Expand length of fixup id string
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kees Cook <[email protected]>
[ Upstream commit 425b1c97b07f2290700f708edabef32861e2b2db ]
GCC 15's -Wunterminated-string-initialization saw that "id" was not including the required trailing NUL character. Instead of marking "id" with __nonstring[1], expand the length of the string as it is used in (debugging) format strings that expect a properly formed C string.
--- include/linux/pnp.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
include/linux/pnp.h +1 -1
@@ -290,7 +290,7 @@ static inline void pnp_set_drvdata(struct pnp_dev *pdev, void *data) }struct pnp_fixup { -char id[7 ]; +char id[8 ];void (*quirk_function) (struct pnp_dev *dev);/* fixup function */ };
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 206/783 phy: rockchip: usbdp: Only verify link rates/lanes/voltage when the corresponding set flags are set
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Andy Yan <[email protected]>
[ Upstream commit 969a38be437b68dc9e12e3c3f08911c9f9c8be73 ]
According documentation of phy_configure_opts_dp, at the configure stage, link rates should only be verify/configure when set_rate flag is set, the same applies to lanes and voltage.
So do it as the documentation says.
Because voltage setting depends on the lanes, link rates set previously, so record the link rates and lanes at it's verify stage.
--- drivers/phy/rockchip/phy-rockchip-usbdp.c | 87 ++++++++++++++--------- 1 file changed, 53 insertions(+), 34 deletions(-)
drivers/phy/rockchip/phy-rockchip-usbdp.c +53 -34
@@ -187,6 +187,8 @@ struct rk_udphy {u32 dp_aux_din_sel;bool dp_sink_hpd_sel;bool dp_sink_hpd_cfg; +unsigned int link_rate; +unsigned int lanes;u8 bw;int id;
@@ -1102,15 +1104,19 @@ static int rk_udphy_dp_phy_power_off(struct phy *phy)return 0 ; } -static int rk_udphy_dp_phy_verify_link_rate (unsigned int link_rate) +/* +* Verify link rate +*/ +static int rk_udphy_dp_phy_verify_link_rate (struct rk_udphy *udphy, +struct phy_configure_opts_dp *dp) { -switch (link_rate) { +switch (dp->link_rate) {case 1620 :case 2700 :case 5400 :case 8100 : + udphy->link_rate = dp->link_rate;break ; -default :return -EINVAL ; }
@@ -1118,45 +1124,44 @@ static int rk_udphy_dp_phy_verify_link_rate(unsigned int link_rate)return 0 ; } -static int rk_udphy_dp_phy_verify_config (struct rk_udphy *udphy, -struct phy_configure_opts_dp *dp) +static int rk_udphy_dp_phy_verify_lanes (struct rk_udphy *udphy, +struct phy_configure_opts_dp *dp) { -int i, ret; - -/* If changing link rate was required, verify it's supported. */ - ret =rk_udphy_dp_phy_verify_link_rate (dp->link_rate); -if (ret) -return ret; - -/* Verify lane count. */ switch (dp->lanes) {case 1 :case 2 :case 4 :/* valid lane count. */ + udphy->lanes = dp->lanes;break ;default :return -EINVAL ; } -/* -* If changing voltages is required, check swing and pre-emphasis -* levels, per-lane. -*/ -if (dp->set_voltages) { -/* Lane count verified previously. */ -for (i =0 ; i < dp->lanes; i++) { -if (dp->voltage[i] >3 || dp->pre[i] >3 ) -return -EINVAL ; +return 0 ; +} -/* -* Sum of voltage swing and pre-emphasis levels cannot -* exceed 3. -*/ -if (dp->voltage[i] + dp->pre[i] >3 ) -return -EINVAL ; - } +/* +* If changing voltages is required, check swing and pre-emphasis +* levels, per-lane. +*/ +static int rk_udphy_dp_phy_verify_voltages (struct rk_udphy *udphy, +struct phy_configure_opts_dp *dp) +{ +int i; + +/* Lane count verified previously. */ +for (i =0 ; i < udphy->lanes; i++) { +if (dp->voltage[i] >3 || dp->pre[i] >3 ) +return -EINVAL ; + +/* +* Sum of voltage swing and pre-emphasis levels cannot +* exceed 3. +*/ +if (dp->voltage[i] + dp->pre[i] >3 ) +return -EINVAL ; }return 0 ;
@@ -1196,9 +1201,23 @@ static int rk_udphy_dp_phy_configure(struct phy *phy,u32 i, val, lane;int ret; - ret =rk_udphy_dp_phy_verify_config (udphy, dp); -if (ret) -return ret; +if (dp->set_rate) { + ret =rk_udphy_dp_phy_verify_link_rate (udphy, dp); +if (ret) +return ret; + } + +if (dp->set_lanes) { + ret =rk_udphy_dp_phy_verify_lanes (udphy, dp); +if (ret) +return ret; + } + +if (dp->set_voltages) { + ret =rk_udphy_dp_phy_verify_voltages (udphy, dp); +if (ret) +return ret; + }if (dp->set_rate) { regmap_update_bits(udphy->pma_regmap, CMN_DP_RSTN_OFFSET,
@@ -1243,9 +1262,9 @@ static int rk_udphy_dp_phy_configure(struct phy *phy, }if (dp->set_voltages) { -for (i =0 ; i < dp->lanes; i++) { +for (i =0 ; i < udphy->lanes; i++) { lane = udphy->dp_lane_sel[i]; -switch (dp->link_rate) { +switch (udphy->link_rate) {case 1620 :case 2700 : regmap_update_bits(udphy->pma_regmap,
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 207/783 arm64/mm: Check pmd_table() in pmd_trans_huge()
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ryan Roberts <[email protected]>
[ Upstream commit d1770e909898c108e8c7d30ca039053e8818a9c9 ]
Check for pmd_table() in pmd_trans_huge() rather then just checking for the PMD_TABLE_BIT. But ensure all present-invalid entries are handled correctly by always setting PTE_VALID before checking with pmd_table().
--- arch/arm64/include/asm/pgtable.h | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)
arch/arm64/include/asm/pgtable.h +12 -12
@@ -548,18 +548,6 @@ static inline int pmd_protnone(pmd_t pmd)#endif #define pmd_present (pmd) pte_present(pmd_pte(pmd)) - -/* -* THP definitions. -*/ - -#ifdef CONFIG_TRANSPARENT_HUGEPAGE -static inline int pmd_trans_huge (pmd_t pmd) -{ -return pmd_val (pmd) &&pmd_present (pmd) && !(pmd_val (pmd) &PMD_TABLE_BIT ); -} -#endif /* CONFIG_TRANSPARENT_HUGEPAGE */ -#define pmd_dirty (pmd) pte_dirty(pmd_pte(pmd))#define pmd_young (pmd) pte_young(pmd_pte(pmd))#define pmd_valid (pmd) pte_valid(pmd_pte(pmd))
@@ -724,6 +712,18 @@ extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,#define pmd_leaf_size (pmd) (pmd_cont(pmd) ? CONT_PMD_SIZE : PMD_SIZE)#define pte_leaf_size (pte) (pte_cont(pte) ? CONT_PTE_SIZE : PAGE_SIZE) +#ifdef CONFIG_TRANSPARENT_HUGEPAGE +static inline int pmd_trans_huge (pmd_t pmd) +{ +/* +* If pmd is present-invalid, pmd_table() won't detect it +* as a table, so force the valid bit for the comparison. +*/ +return pmd_val (pmd) &&pmd_present (pmd) && + !pmd_table (__pmd (pmd_val (pmd) |PTE_VALID )); +} +#endif /* CONFIG_TRANSPARENT_HUGEPAGE */ +#if defined(CONFIG_ARM64_64K_PAGES ) ||CONFIG_PGTABLE_LEVELS <3 static inline bool pud_sect (pud_t pud) {return false; }static inline bool pud_table (pud_t pud) {return true; }
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 208/783 arm64/mm: Check PUD_TYPE_TABLE in pud_bad()
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Ryan Roberts <[email protected]>
[ Upstream commit bfb1d2b9021c21891427acc86eb848ccedeb274e ]
pud_bad() is currently defined in terms of pud_table(). Although for some configs, pud_table() is hard-coded to true i.e. when using 64K base pages or when page table levels are less than 3.
pud_bad() is intended to check that the pud is configured correctly. Hence let's open-code the same check that the full version of pud_table() uses into pud_bad(). Then it always performs the check regardless of the config.
--- arch/arm64/include/asm/pgtable.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
arch/arm64/include/asm/pgtable.h +2 -1
@@ -805,7 +805,8 @@ static inline unsigned long pmd_page_vaddr(pmd_t pmd) pr_err("%s:%d: bad pmd %016llx.\n", __FILE__, __LINE__, pmd_val(e))#define pud_none (pud) (!pud_val(pud)) -#define pud_bad (pud) (!pud_table(pud)) +#define pud_bad (pud) ((pud_val(pud) & PUD_TYPE_MASK) != \ + PUD_TYPE_TABLE)#define pud_present (pud) pte_present(pud_pte(pud))#ifndef __PAGETABLE_PMD_FOLDED#define pud_leaf (pud) (pud_present(pud) && !pud_table(pud))
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 209/783 mmc: dw_mmc: add exynos7870 DW MMC support
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kaustabh Chakraborty <[email protected]>
[ Upstream commit 7cbe799ac10fd8be85af5e0615c4337f81e575f3 ]
Add support for Exynos7870 DW MMC controllers, for both SMU and non-SMU variants. These controllers require a quirk to access 64-bit FIFO in 32-bit accesses (DW_MMC_QUIRK_FIFO64_32).
--- drivers/mmc/host/dw_mmc-exynos.c | 41 +++++++++++++++++++++++++++++++- 1 file changed, 40 insertions(+), 1 deletion(-)
drivers/mmc/host/dw_mmc-exynos.c +40 -1
@@ -27,6 +27,8 @@ enum dw_mci_exynos_type {DW_MCI_TYPE_EXYNOS5420_SMU ,DW_MCI_TYPE_EXYNOS7 ,DW_MCI_TYPE_EXYNOS7_SMU , +DW_MCI_TYPE_EXYNOS7870 , +DW_MCI_TYPE_EXYNOS7870_SMU , DW_MCI_TYPE_ARTPEC8, };
@@ -69,6 +71,12 @@ static struct dw_mci_exynos_compatible { }, { .compatible = "samsung,exynos7-dw-mshc-smu", .ctrl_type = DW_MCI_TYPE_EXYNOS7_SMU, + }, { + .compatible = "samsung,exynos7870-dw-mshc", + .ctrl_type = DW_MCI_TYPE_EXYNOS7870, + }, { + .compatible = "samsung,exynos7870-dw-mshc-smu", + .ctrl_type = DW_MCI_TYPE_EXYNOS7870_SMU, }, { .compatible = "axis,artpec8-dw-mshc", .ctrl_type = DW_MCI_TYPE_ARTPEC8,
@@ -85,6 +93,8 @@ static inline u8 dw_mci_exynos_get_ciu_div(struct dw_mci *host)return EXYNOS4210_FIXED_CIU_CLK_DIV ; else if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 || priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU || + priv->ctrl_type == DW_MCI_TYPE_EXYNOS7870 || + priv->ctrl_type == DW_MCI_TYPE_EXYNOS7870_SMU || priv->ctrl_type == DW_MCI_TYPE_ARTPEC8) return SDMMC_CLKSEL_GET_DIV(mci_readl(host, CLKSEL64)) + 1; else
@@ -100,7 +110,8 @@ static void dw_mci_exynos_config_smu(struct dw_mci *host)* set for non-ecryption mode at this time. */ if (priv->ctrl_type ==DW_MCI_TYPE_EXYNOS5420_SMU || - priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7_SMU ) { + priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7_SMU || + priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7870_SMU ) {mci_writel (host,MPSBEGIN0 ,0 );mci_writel (host,MPSEND0 ,SDMMC_ENDING_SEC_NR_MAX ); mci_writel(host, MPSCTRL0, SDMMC_MPSCTRL_SECURE_WRITE_BIT |
@@ -126,6 +137,12 @@ static int dw_mci_exynos_priv_init(struct dw_mci *host)DQS_CTRL_GET_RD_DELAY (priv->saved_strobe_ctrl); } +if (priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7870 || + priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7870_SMU ) { +/* Quirk needed for certain Exynos SoCs */ + host->quirks |=DW_MMC_QUIRK_FIFO64_32 ; + } +if (priv->ctrl_type ==DW_MCI_TYPE_ARTPEC8 ) {/* Quirk needed for the ARTPEC-8 SoC */ host->quirks |=DW_MMC_QUIRK_EXTENDED_TMOUT ;
@@ -143,6 +160,8 @@ static void dw_mci_exynos_set_clksel_timing(struct dw_mci *host, u32 timing)if (priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7 || priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7_SMU || + priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7870 || + priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7870_SMU || priv->ctrl_type ==DW_MCI_TYPE_ARTPEC8 ) clksel =mci_readl (host,CLKSEL64 );else
@@ -152,6 +171,8 @@ static void dw_mci_exynos_set_clksel_timing(struct dw_mci *host, u32 timing)if (priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7 || priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7_SMU || + priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7870 || + priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7870_SMU || priv->ctrl_type ==DW_MCI_TYPE_ARTPEC8 )mci_writel (host,CLKSEL64 , clksel);else
@@ -222,6 +243,8 @@ static int dw_mci_exynos_resume_noirq(struct device *dev)if (priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7 || priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7_SMU || + priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7870 || + priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7870_SMU || priv->ctrl_type ==DW_MCI_TYPE_ARTPEC8 ) clksel =mci_readl (host,CLKSEL64 );else
@@ -230,6 +253,8 @@ static int dw_mci_exynos_resume_noirq(struct device *dev)if (clksel &SDMMC_CLKSEL_WAKEUP_INT ) {if (priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7 || priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7_SMU || + priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7870 || + priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7870_SMU || priv->ctrl_type ==DW_MCI_TYPE_ARTPEC8 )mci_writel (host,CLKSEL64 , clksel);else
@@ -409,6 +434,8 @@ static inline u8 dw_mci_exynos_get_clksmpl(struct dw_mci *host)if (priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7 || priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7_SMU || + priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7870 || + priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7870_SMU || priv->ctrl_type ==DW_MCI_TYPE_ARTPEC8 )return SDMMC_CLKSEL_CCLK_SAMPLE (mci_readl (host,CLKSEL64 ));else
@@ -422,6 +449,8 @@ static inline void dw_mci_exynos_set_clksmpl(struct dw_mci *host, u8 sample)if (priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7 || priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7_SMU || + priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7870 || + priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7870_SMU || priv->ctrl_type ==DW_MCI_TYPE_ARTPEC8 ) clksel =mci_readl (host,CLKSEL64 );else
@@ -429,6 +458,8 @@ static inline void dw_mci_exynos_set_clksmpl(struct dw_mci *host, u8 sample) clksel =SDMMC_CLKSEL_UP_SAMPLE (clksel, sample);if (priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7 || priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7_SMU || + priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7870 || + priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7870_SMU || priv->ctrl_type ==DW_MCI_TYPE_ARTPEC8 )mci_writel (host,CLKSEL64 , clksel);else
@@ -443,6 +474,8 @@ static inline u8 dw_mci_exynos_move_next_clksmpl(struct dw_mci *host)if (priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7 || priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7_SMU || + priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7870 || + priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7870_SMU || priv->ctrl_type ==DW_MCI_TYPE_ARTPEC8 ) clksel =mci_readl (host,CLKSEL64 );else
@@ -453,6 +486,8 @@ static inline u8 dw_mci_exynos_move_next_clksmpl(struct dw_mci *host)if (priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7 || priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7_SMU || + priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7870 || + priv->ctrl_type ==DW_MCI_TYPE_EXYNOS7870_SMU || priv->ctrl_type ==DW_MCI_TYPE_ARTPEC8 )mci_writel (host,CLKSEL64 , clksel);else
@@ -632,6 +667,10 @@ static const struct of_device_id dw_mci_exynos_match[] = { .data = &exynos_drv_data, }, { .compatible = "samsung,exynos7-dw-mshc-smu", .data = &exynos_drv_data, }, + { .compatible = "samsung,exynos7870-dw-mshc", + .data = &exynos_drv_data, }, + { .compatible = "samsung,exynos7870-dw-mshc-smu", + .data = &exynos_drv_data, }, { .compatible = "axis,artpec8-dw-mshc", .data = &artpec_drv_data, }, {},
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 210/783 mmc: sdhci: Disable SD card clock before changing parameters
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Erick Shepherd <[email protected]>
[ Upstream commit fb3bbc46c94f261b6156ee863c1b06c84cf157dc ]
Per the SD Host Controller Simplified Specification v4.20 §3.2.3, change the SD card clock parameters only after first disabling the external card clock. Doing this fixes a spurious clock pulse on Baytrail and Apollo Lake SD controllers which otherwise breaks voltage switching with a specific Swissbit SD card.
--- drivers/mmc/host/sdhci.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
drivers/mmc/host/sdhci.c +7 -2
@@ -2065,10 +2065,15 @@ void sdhci_set_clock(struct sdhci_host *host, unsigned int clock) host->mmc->actual_clock =0 ; -sdhci_writew (host,0 ,SDHCI_CLOCK_CONTROL ); + clk =sdhci_readw (host,SDHCI_CLOCK_CONTROL ); +if (clk &SDHCI_CLOCK_CARD_EN ) +sdhci_writew (host, clk & ~SDHCI_CLOCK_CARD_EN , +SDHCI_CLOCK_CONTROL ); -if (clock ==0 ) +if (clock ==0 ) { +sdhci_writew (host,0 ,SDHCI_CLOCK_CONTROL );return ; + } clk =sdhci_calc_clk (host, clock, &host->mmc->actual_clock);sdhci_enable_clk (host, clk);
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 211/783 usb: xhci: Dont change the status of stalled TDs on failed Stop EP
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michal Pecio <[email protected]>
[ Upstream commit dfc88357b6b6356dadea06b2c0bc8041f5e11720 ]
When the device stalls an endpoint, current TD is assigned -EPIPE status and Reset Endpoint is queued. If a Stop Endpoint is pending at the time, it will run before Reset Endpoint and fail due to the stall. Its handler will change TD's status to -EPROTO before Reset Endpoint handler runs and initiates giveback.
Check if the stall has already been handled and don't try to do it again. Since xhci_handle_halted_endpoint() performs this check too, not overwriting td->status is the only difference.
I haven't seen this case yet, but I have seen a related one where the xHC has already executed Reset Endpoint, EP Context state is now Stopped and EP_HALTED is set. If the xHC took a bit longer to execute Reset Endpoint, said case would become this one.
--- drivers/usb/host/xhci-ring.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)
drivers/usb/host/xhci-ring.c +11 -1
@@ -1164,7 +1164,14 @@ static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id,*/ switch (GET_EP_CTX_STATE (ep_ctx)) {case EP_STATE_HALTED : -xhci_dbg (xhci,"Stop ep completion raced with stall, reset ep\n" ); +xhci_dbg (xhci,"Stop ep completion raced with stall\n" ); +/* +* If the halt happened before Stop Endpoint failed, its transfer event +* should have already been handled and Reset Endpoint should be pending. +*/ +if (ep->ep_state &EP_HALTED ) + goto reset_done; +if (ep->ep_state &EP_HAS_STREAMS ) { reset_type =EP_SOFT_RESET ; }else {
@@ -1175,8 +1182,11 @@ static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id, }/* reset ep, reset handler cleans up cancelled tds */ err =xhci_handle_halted_endpoint (xhci, ep, td, reset_type); +xhci_dbg (xhci,"Stop ep completion resetting ep, status %d\n" , err);if (err)break ; +reset_done: +/* Reset EP handler will clean up cancelled TDs */ ep->ep_state &= ~EP_STOP_CMD_PENDING ;return ;case EP_STATE_STOPPED :
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 212/783 wifi: iwlwifi: mvm: fix setting the TK when associated
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Avraham Stern <[email protected]>
[ Upstream commit 3ad61970ac9e164be1b09b46c01aa942e8966132 ]
When running secured ranging and the initiator is associated with the responder, the TK was not set in the range request command. Fix it.
--- drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c +4 -0
@@ -773,7 +773,11 @@ iwl_mvm_ftm_set_secured_ranging(struct iwl_mvm *mvm, struct ieee80211_vif *vif, target.bssid = bssid; target.cipher = cipher; + target.tk =NULL ;ieee80211_iter_keys (mvm->hw, vif, iter, &target); + +if (!WARN_ON (!target.tk)) +memcpy (tk, target.tk,TK_11AZ_LEN ); }else {memcpy (tk, entry->tk,sizeof (entry->tk)); }
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 213/783 hwmon: (dell-smm) Increment the number of fans
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Kurt Borja <[email protected]>
[ Upstream commit dbcfcb239b3b452ef8782842c36fb17dd1b9092f ]
Some Alienware laptops that support the SMM interface, may have up to 4 fans.
Tested on an Alienware x15 r1.
--- Documentation/hwmon/dell-smm-hwmon.rst | 14 +++++++------- drivers/hwmon/dell-smm-hwmon.c | 5 ++++- 2 files changed, 11 insertions(+), 8 deletions(-)
Documentation/hwmon/dell-smm-hwmon.rst +7 -7
@@ -32,12 +32,12 @@ Temperature sensors and fans can be queried and set via the standard =============================== ======= ======================================= Name Perm Description =============================== ======= ======================================= -fan[1-3]_input RO Fan speed in RPM. -fan[1-3]_label RO Fan label. -fan[1-3]_min RO Minimal Fan speed in RPM -fan[1-3]_max RO Maximal Fan speed in RPM -fan[1-3]_target RO Expected Fan speed in RPM -pwm[1-3] RW Control the fan PWM duty-cycle. +fan[1-4]_input RO Fan speed in RPM. +fan[1-4]_label RO Fan label. +fan[1-4]_min RO Minimal Fan speed in RPM +fan[1-4]_max RO Maximal Fan speed in RPM +fan[1-4]_target RO Expected Fan speed in RPM +pwm[1-4] RW Control the fan PWM duty-cycle. pwm1_enable WO Enable or disable automatic BIOS fan control (not supported on all laptops, see below for details).
@@ -93,7 +93,7 @@ Again, when you find new codes, we'd be happy to have your patches! --------------------------- The driver also exports the fans as thermal cooling devices with -``type`` set to ``dell-smm-fan[1-3]``. This allows for easy fan control +``type`` set to ``dell-smm-fan[1-4]``. This allows for easy fan control using one of the thermal governors. Module parameters
drivers/hwmon/dell-smm-hwmon.c +4 -1
@@ -73,7 +73,7 @@#define DELL_SMM_LEGACY_EXECUTE 0x1#define DELL_SMM_NO_TEMP 10 -#define DELL_SMM_NO_FANS 3 +#define DELL_SMM_NO_FANS 4struct smm_regs {unsigned int eax;
@@ -1074,11 +1074,14 @@ static const struct hwmon_channel_info * const dell_smm_info[] = { HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MIN | HWMON_F_MAX | HWMON_F_TARGET, HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MIN | HWMON_F_MAX | + HWMON_F_TARGET, + HWMON_F_INPUT | HWMON_F_LABEL | HWMON_F_MIN | HWMON_F_MAX | HWMON_F_TARGET ),HWMON_CHANNEL_INFO (pwm,HWMON_PWM_INPUT |HWMON_PWM_ENABLE ,HWMON_PWM_INPUT , +HWMON_PWM_INPUT ,HWMON_PWM_INPUT ),NULL
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 214/783 iommu: Keep dev->iommu state consistent
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Robin Murphy <[email protected]>
[ Upstream commit 3832862eb9c4dfa0e80b2522bfaedbc8a43de97d ]
At the moment, if of_iommu_configure() allocates dev->iommu itself via iommu_fwspec_init(), then suffers a DT parsing failure, it cleans up the fwspec but leaves the empty dev_iommu hanging around. So far this is benign (if a tiny bit wasteful), but we'd like to be able to reason about dev->iommu having a consistent and unambiguous lifecycle. Thus make sure that the of_iommu cleanup undoes precisely whatever it did.
--- drivers/iommu/iommu-priv.h | 2 ++ drivers/iommu/iommu.c | 2 +- drivers/iommu/of_iommu.c | 6 +++++- 3 files changed, 8 insertions(+), 2 deletions(-)
drivers/iommu/iommu-priv.h +2 -0
@@ -17,6 +17,8 @@ static inline const struct iommu_ops *dev_iommu_ops(struct device *dev)return dev->iommu->iommu_dev->ops; } +void dev_iommu_free (struct device *dev); +const struct iommu_ops *iommu_ops_from_fwnode (const struct fwnode_handle *fwnode);static inline const struct iommu_ops *iommu_fwspec_ops (struct iommu_fwspec *fwspec)
drivers/iommu/iommu.c +1 -1
@@ -352,7 +352,7 @@ static struct dev_iommu *dev_iommu_get(struct device *dev)return param; } -static void dev_iommu_free (struct device *dev) +void dev_iommu_free (struct device *dev) {struct dev_iommu *param = dev->iommu;
drivers/iommu/of_iommu.c +5 -1
@@ -116,6 +116,7 @@ static void of_pci_check_device_ats(struct device *dev, struct device_node *np)int of_iommu_configure (struct device *dev,struct device_node *master_np,const u32 *id) { +bool dev_iommu_present;int err;if (!master_np)
@@ -127,6 +128,7 @@ int of_iommu_configure(struct device *dev, struct device_node *master_np,mutex_unlock (&iommu_probe_device_lock);return 0 ; } + dev_iommu_present = dev->iommu;/* * We don't currently walk up the tree looking for a parent IOMMU.
@@ -147,8 +149,10 @@ int of_iommu_configure(struct device *dev, struct device_node *master_np, err =of_iommu_configure_device (master_np, dev, id); } -if (err) +if (err && dev_iommu_present)iommu_fwspec_free (dev); +else if (err && dev->iommu) +dev_iommu_free (dev);mutex_unlock (&iommu_probe_device_lock);if (!err && dev->bus)
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 215/783 printk: Check CON_SUSPEND when unblanking a console
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marcos Paulo de Souza <[email protected]>
[ Upstream commit 72c96a2dacc0fb056d13a5f02b0845c4c910fe54 ]
The commit 9e70a5e109a4 ("printk: Add per-console suspended state") introduced the CON_SUSPENDED flag for consoles. The suspended consoles will stop receiving messages, so don't unblank suspended consoles because it won't be showing anything either way.
--- kernel/printk/printk.c | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-)
kernel/printk/printk.c +12 -2
@@ -3340,7 +3340,12 @@ void console_unblank(void)*/ cookie =console_srcu_read_lock ();for_each_console_srcu (c) { -if ((console_srcu_read_flags (c) &CON_ENABLED ) && c->unblank) { +short flags =console_srcu_read_flags (c); + +if (flags &CON_SUSPENDED ) +continue ; + +if ((flags &CON_ENABLED ) && c->unblank) { found_unblank = true;break ; }
@@ -3377,7 +3382,12 @@ void console_unblank(void) cookie =console_srcu_read_lock ();for_each_console_srcu (c) { -if ((console_srcu_read_flags (c) &CON_ENABLED ) && c->unblank) +short flags =console_srcu_read_flags (c); + +if (flags &CON_SUSPENDED ) +continue ; + +if ((flags &CON_ENABLED ) && c->unblank) c->unblank (); }console_srcu_read_unlock (cookie);
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 216/783 wifi: iwlwifi: dont warn when if there is a FW error
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Miri Korenblit <[email protected]>
[ Upstream commit c7f50d0433a016d43681592836a3d484817bfb34 ]
iwl_trans_reclaim is warning if it is called when the FW is not alive. But if it is called when there is a pending restart, i.e. after a FW error, there is no need to warn, instead - return silently.
--- drivers/net/wireless/intel/iwlwifi/iwl-trans.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/net/wireless/intel/iwlwifi/iwl-trans.c +4 -1
@@ -2,7 +2,7 @@/* * Copyright (C) 2015 Intel Mobile Communications GmbH * Copyright (C) 2016-2017 Intel Deutschland GmbH -* Copyright (C) 2019-2021, 2023-2024 Intel Corporation +* Copyright (C) 2019-2021, 2023-2025 Intel Corporation */ #include <linux/kernel.h> #include <linux/bsearch.h>
@@ -655,6 +655,9 @@ IWL_EXPORT_SYMBOL(iwl_trans_tx);void iwl_trans_reclaim (struct iwl_trans *trans,int queue,int ssn,struct sk_buff_head *skbs,bool is_flush) { +if (unlikely (test_bit (STATUS_FW_ERROR , &trans->status))) +return ; +if (WARN_ONCE (trans->state !=IWL_TRANS_FW_ALIVE ,"bad state = %d\n" , trans->state))return ;
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 217/783 wifi: iwlwifi: w/a FW SMPS mode selection
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Daniel Gabay <[email protected]>
[ Upstream commit b2e709805ce955f80803b7cab3421813c79e1df4 ]
The FW is now responsible of determining the SMPS mode.
If the user disabled power save in a certain vif, we send the vif-level power command to clear out the POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK bit for that vif.
But erroneously, the FW checks DEVICE_POWER_FLAGS_POWER_SAVE_ENA_MSK in the device-level command to determine the SMPS mode.
To W/A this, send also the device-level command when the power save of a vif changes, and disable power save if there is any vif that has power save disabled.
--- drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 15 +++++++++++++++ .../net/wireless/intel/iwlwifi/mvm/mld-mac80211.c | 3 ++- drivers/net/wireless/intel/iwlwifi/mvm/mvm.h | 3 +++ 3 files changed, 20 insertions(+), 1 deletion(-)
drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +15 -0
@@ -4099,6 +4099,20 @@ iwl_mvm_sta_state_authorized_to_assoc(struct iwl_mvm *mvm,return 0 ; } +void iwl_mvm_smps_workaround (struct iwl_mvm *mvm,struct ieee80211_vif *vif, +bool update) +{ +struct iwl_mvm_vif *mvmvif =iwl_mvm_vif_from_mac80211 (vif); + +if (!iwl_mvm_has_rlc_offload (mvm)) +return ; + + mvmvif->ps_disabled = !vif->cfg.ps; + +if (update) +iwl_mvm_power_update_mac (mvm); +} +/* Common part for MLD and non-MLD modes */ int iwl_mvm_mac_sta_state_common(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
@@ -4191,6 +4205,7 @@ int iwl_mvm_mac_sta_state_common(struct ieee80211_hw *hw, new_state == IEEE80211_STA_AUTHORIZED) { ret =iwl_mvm_sta_state_assoc_to_authorized (mvm, vif, sta, callbacks); +iwl_mvm_smps_workaround (mvm, vif, true); } else if (old_state == IEEE80211_STA_AUTHORIZED && new_state == IEEE80211_STA_ASSOC) { ret = iwl_mvm_sta_state_authorized_to_assoc(mvm, vif, sta,
drivers/net/wireless/intel/iwlwifi/mvm/mld-mac80211.c +2 -1
@@ -1,6 +1,6 @@// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause /* -* Copyright (C) 2022-2024 Intel Corporation +* Copyright (C) 2022-2025 Intel Corporation */ #include "mvm.h"
@@ -887,6 +887,7 @@ static void iwl_mvm_mld_vif_cfg_changed_station(struct iwl_mvm *mvm, }if (changes &BSS_CHANGED_PS ) { +iwl_mvm_smps_workaround (mvm, vif, false); ret =iwl_mvm_power_update_mac (mvm);if (ret)IWL_ERR (mvm,"failed to update power mode\n" );
drivers/net/wireless/intel/iwlwifi/mvm/mvm.h +3 -0
@@ -3043,4 +3043,7 @@ iwl_mvm_send_ap_tx_power_constraint_cmd(struct iwl_mvm *mvm,struct ieee80211_vif *vif, struct ieee80211_bss_conf *bss_conf, bool is_ap); + +void iwl_mvm_smps_workaround (struct iwl_mvm *mvm,struct ieee80211_vif *vif, +bool update);#endif /* __IWL_MVM_H__ */
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 218/783 wifi: iwlwifi: fix debug actions order
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Berg <[email protected]>
[ Upstream commit eb29b4ffafb20281624dcd2cbb768d6f30edf600 ]
The order of actions taken for debug was implemented incorrectly. Now we implemented the dump split and do the FW reset only in the middle of the dump (rather than the FW killing itself on error.) As a result, some of the actions taken when applying the config will now crash the device, so we need to fix the order.
--- drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
drivers/net/wireless/intel/iwlwifi/iwl-dbg-tlv.c +5 -5
@@ -1,6 +1,6 @@// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause /* -* Copyright (C) 2018-2024 Intel Corporation +* Copyright (C) 2018-2025 Intel Corporation */ #include <linux/firmware.h> #include "iwl-drv.h"
@@ -1372,15 +1372,15 @@ void _iwl_dbg_tlv_time_point(struct iwl_fw_runtime *fwrt,switch (tp_id) {case IWL_FW_INI_TIME_POINT_EARLY :iwl_dbg_tlv_init_cfg (fwrt); -iwl_dbg_tlv_apply_config (fwrt, conf_list);iwl_dbg_tlv_update_drams (fwrt);iwl_dbg_tlv_tp_trigger (fwrt, sync, trig_list, tp_data,NULL ); +iwl_dbg_tlv_apply_config (fwrt, conf_list);break ;case IWL_FW_INI_TIME_POINT_AFTER_ALIVE :iwl_dbg_tlv_apply_buffers (fwrt);iwl_dbg_tlv_send_hcmds (fwrt, hcmd_list); -iwl_dbg_tlv_apply_config (fwrt, conf_list);iwl_dbg_tlv_tp_trigger (fwrt, sync, trig_list, tp_data,NULL ); +iwl_dbg_tlv_apply_config (fwrt, conf_list);break ;case IWL_FW_INI_TIME_POINT_PERIODIC :iwl_dbg_tlv_set_periodic_trigs (fwrt);
@@ -1390,14 +1390,14 @@ void _iwl_dbg_tlv_time_point(struct iwl_fw_runtime *fwrt,case IWL_FW_INI_TIME_POINT_MISSED_BEACONS :case IWL_FW_INI_TIME_POINT_FW_DHC_NOTIFICATION :iwl_dbg_tlv_send_hcmds (fwrt, hcmd_list); -iwl_dbg_tlv_apply_config (fwrt, conf_list);iwl_dbg_tlv_tp_trigger (fwrt, sync, trig_list, tp_data, iwl_dbg_tlv_check_fw_pkt); +iwl_dbg_tlv_apply_config (fwrt, conf_list);break ;default :iwl_dbg_tlv_send_hcmds (fwrt, hcmd_list); -iwl_dbg_tlv_apply_config (fwrt, conf_list);iwl_dbg_tlv_tp_trigger (fwrt, sync, trig_list, tp_data,NULL ); +iwl_dbg_tlv_apply_config (fwrt, conf_list);break ; } }
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 219/783 wifi: iwlwifi: mark Br device not integrated
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Johannes Berg <[email protected]>
[ Upstream commit 5f0ab2f35a43773a0dfe1297129a8dbff906b932 ]
This is a discrete device, don't mark it as integrated. This also means we cannot set the LTR delay.
--- drivers/net/wireless/intel/iwlwifi/cfg/dr.c | 2 -- 1 file changed, 2 deletions(-)
drivers/net/wireless/intel/iwlwifi/cfg/dr.c +0 -2
@@ -148,11 +148,9 @@ const struct iwl_cfg_trans_params iwl_br_trans_cfg = { .mq_rx_supported = true, .rf_id = true, .gen2 = true, - .integrated = true, .umac_prph_offset = 0x300000, .xtal_latency = 12000, .low_latency_xtal = true, - .ltr_delay = IWL_CFG_TRANS_LTR_DELAY_2500US, };const char iwl_br_name[] ="Intel(R) TBD Br device" ;
Signature · 1 line
2.39.5
Greg Kroah-Hartman
maintainerPATCH 220/783 wifi: iwlwifi: fix the ECKV UEFI variable name
In reply to Greg Kroah-Hartman6.14-stable review patch. If anyone has any objections, please let me know.
------------------
From: Emmanuel Grumbach <[email protected]>
[ Upstream commit 3ea2970b0578011ab8402ad0cff39712255f63df ]
This UEFI variable name was badly named. Fix its name and also use the right GUID to find it: we need to use the BT_WIFI (a.k.a. Common) GUID.
--- drivers/net/wireless/intel/iwlwifi/fw/uefi.c | 8 +++++--- drivers/net/wireless/intel/iwlwifi/fw/uefi.h | 4 ++-- 2 files changed, 7 insertions(+), 5 deletions(-)
drivers/net/wireless/intel/iwlwifi/fw/uefi.c +5 -3
@@ -1,6 +1,6 @@// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause /* -* Copyright(c) 2021-2024 Intel Corporation +* Copyright(c) 2021-2025 Intel Corporation */ #include "iwl-drv.h"
@@ -678,8 +678,10 @@ int iwl_uefi_get_eckv(struct iwl_fw_runtime *fwrt, u32 *extl_clk)struct uefi_cnv_var_eckv *data;int ret =0 ; - data =iwl_uefi_get_verified_variable (fwrt->trans,IWL_UEFI_ECKV_NAME , -"ECKV" ,sizeof (*data),NULL ); + data =iwl_uefi_get_verified_variable_guid (fwrt->trans, + &IWL_EFI_WIFI_BT_GUID , +IWL_UEFI_ECKV_NAME , +"ECKV" ,sizeof (*data),NULL );if (IS_ERR (data))return -EINVAL ;
drivers/net/wireless/intel/iwlwifi/fw/uefi.h +2 -2
@@ -1,6 +1,6 @@/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ /* -* Copyright(c) 2021-2024 Intel Corporation +* Copyright(c) 2021-2025 Intel Corporation */ #ifndef __iwl_fw_uefi__#define __iwl_fw_uefi__
@@ -19,7 +19,7 @@#define IWL_UEFI_WTAS_NAME L"UefiCnvWlanWTAS"#define IWL_UEFI_SPLC_NAME L"UefiCnvWlanSPLC"#define IWL_UEFI_WRDD_NAME L"UefiCnvWlanWRDD" -#define IWL_UEFI_ECKV_NAME L"UefiCnvWlanECKV" +#define IWL_UEFI_ECKV_NAME L"UefiCnvCommonECKV"#define IWL_UEFI_DSM_NAME L"UefiCnvWlanGeneralCfg"#define IWL_UEFI_WBEM_NAME L"UefiCnvWlanWBEM"#define IWL_UEFI_PUNCTURING_NAME L"UefiCnvWlanPuncturing"
Signature · 1 line
2.39.5