Skip to contentSkip to conversation

dt-bindings: phy: Convert marvell,berlin2-usb-phy to DT schema

PATCH New Rob Herring (Arm) 1 participant 1 message Jun 7, 2025

Subsystems (2)
lore
Share & tools
lore

Rob Herring (Arm)

author maintainer
#0 lore raw

PATCH 1/1 dt-bindings: phy: Convert marvell,berlin2-usb-phy to DT schema

Convert the Marvell Berlin2 USB PHY binding to DT schema format. It's a straight forward conversion.

---
 .../bindings/phy/berlin-usb-phy.txt           | 16 -------
 .../bindings/phy/marvell,berlin2-usb-phy.yaml | 42 +++++++++++++++++++
 2 files changed, 42 insertions(+), 16 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/phy/berlin-usb-phy.txt
 create mode 100644 Documentation/devicetree/bindings/phy/marvell,berlin2-usb-phy.yaml
Documentation/devicetree/bindings/phy/berlin-usb-phy.txt deleted +0 -16
deleted file mode 100644
index be33780f668e..000000000000
@@ -1,16 +0,0 @@
-* Marvell Berlin USB PHY
-
-Required properties:
-- compatible: "marvell,berlin2-usb-phy" or "marvell,berlin2cd-usb-phy"
-- reg: base address and length of the registers
-- #phys-cells: should be 0
-- resets: reference to the reset controller
-
-Example:
-
-	usb-phy@f774000 {
-		compatible = "marvell,berlin2-usb-phy";
-		reg = <0xf774000 0x128>;
-		#phy-cells = <0>;
-		resets = <&chip 0x104 14>;
-	};
Documentation/devicetree/bindings/phy/marvell,berlin2-usb-phy.yaml new file +42 -0

42 lines not on this page · raw message

Signature · 1 line
2.47.2