Skip to contentSkip to conversation

mm/shmem, swap: fix softlockup with mTHP swapin

PATCH Applied Kairui Song 4 participants 5 messages Jun 10, 2025 – Jun 12, 2025

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 mm/shmem, swap: fix softlockup with mTHP swapin

From: Kairui Song <[email protected]>

Following softlockup can be easily reproduced on my test machine with:

echo always > /sys/kernel/mm/transparent_hugepage/hugepages-64kB/enabled swapon /dev/zram0 # zram0 is a 48G swap device
mkdir -p /sys/fs/cgroup/memory/test
echo 1G > /sys/fs/cgroup/test/memory.max
echo $BASHPID > /sys/fs/cgroup/test/cgroup.procs
while true; do
dd if=/dev/zero of=/tmp/test.img bs=1M count=5120
cat /tmp/test.img > /dev/null
rm /tmp/test.img
done

Then after a while:

watchdog: BUG: soft lockup - CPU#0 stuck for 763s! [cat:5787]
Modules linked in: zram virtiofs
CPU: 0 UID: 0 PID: 5787 Comm: cat Kdump: loaded Tainted: G             L      6.15.0.orig-gf3021d9246bc-dirty #118 PREEMPT(voluntary)·
Tainted: [L]=SOFTLOCKUP
Hardware name: Red Hat KVM/RHEL-AV, BIOS 0.0.0 02/06/2015
RIP: 0010:mpol_shared_policy_lookup+0xd/0x70
Code: e9 b8 b4 ff ff 31 c0 c3 cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 41 54 55 53 <48> 8b 1f 48 85 db 74 41 4c 8d 67 08 48 89 fb 48 89 f5 4c 89 e7 e8
RSP: 0018:ffffc90002b1fc28 EFLAGS: 00000202
RAX: 00000000001c20ca RBX: 0000000000724e1e RCX: 0000000000000001
RDX: ffff888118e214c8 RSI: 0000000000057d42 RDI: ffff888118e21518
RBP: 000000000002bec8 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000bf4 R11: 0000000000000000 R12: 0000000000000001
R13: 00000000001c20ca R14: 00000000001c20ca R15: 0000000000000000
FS:  00007f03f995c740(0000) GS:ffff88a07ad9a000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f03f98f1000 CR3: 0000000144626004 CR4: 0000000000770eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 <TASK>
 shmem_alloc_folio+0x31/0xc0
 shmem_swapin_folio+0x309/0xcf0
 ? filemap_get_entry+0x117/0x1e0
 ? xas_load+0xd/0xb0
 ? filemap_get_entry+0x101/0x1e0
 shmem_get_folio_gfp+0x2ed/0x5b0
 shmem_file_read_iter+0x7f/0x2e0
 vfs_read+0x252/0x330
 ksys_read+0x68/0xf0
 do_syscall_64+0x4c/0x1c0
 entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f03f9a46991
Code: 00 48 8b 15 81 14 10 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd e8 20 ad 01 00 f3 0f 1e fa 80 3d 35 97 10 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 4f c3 66 0f 1f 44 00 00 55 48 89 e5 48 83 ec
RSP: 002b:00007fff3c52bd28 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 0000000000040000 RCX: 00007f03f9a46991
RDX: 0000000000040000 RSI: 00007f03f98ba000 RDI: 0000000000000003
RBP: 00007fff3c52bd50 R08: 0000000000000000 R09: 00007f03f9b9a380
R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000040000
R13: 00007f03f98ba000 R14: 0000000000000003 R15: 0000000000000000
 </TASK>

The reason is simple, readahead brought some order 0 folio in swap cache, and the swapin mTHP folio being allocated is in confict with it, so swapcache_prepare fails and causes shmem_swap_alloc_folio to return -EEXIST, and shmem simply retries again and again causing this loop.

Fix it by applying a similar fix for anon mTHP swapin.

The performance change is very slight, time of swapin 10g zero folios with shmem (test for 12 times):

Before:  2.47s
After:   2.48s
Fixes 1dd44c0af4fa1 ("mm: shmem: skip swapcache for swapin of synchronous swap device")

---

V1: https://lore.kernel.org/linux-mm/[email protected]/
Updates:
- Move non_swapcache_batch check before swapcache_prepare, I was expecting this could improve the performance, turns out it barely helps and may even cause more overhead in some cases. [ Barry Song ]
- Remove zero map check, no need to do that for shmem [ Barry Song, Baolin Wang ]
- Fix build bot error.

V2: https://lore.kernel.org/linux-mm/[email protected]/
Updates:
- Minor comment adjustment [ Nhat Pham ]

 mm/memory.c | 20 --------------------
 mm/shmem.c  |  6 +++++-
 mm/swap.h   | 23 +++++++++++++++++++++++
 3 files changed, 28 insertions(+), 21 deletions(-)
mm/memory.c +0 -20
index 8eba595056fe..b0cda5aab398 100644
@@ -4315,26 +4315,6 @@ static struct folio *__alloc_swap_folio(struct vm_fault *vmf)
 }
 
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
-static inline int non_swapcache_batch(swp_entry_t entry, int max_nr)
-{
-	struct swap_info_struct *si = swp_swap_info(entry);
-	pgoff_t offset = swp_offset(entry);
-	int i;
-
-	/*
-	 * While allocating a large folio and doing swap_read_folio, which is
-	 * the case the being faulted pte doesn't have swapcache. We need to
-	 * ensure all PTEs have no cache as well, otherwise, we might go to
-	 * swap devices while the content is in swapcache.
-	 */
-	for (i = 0; i < max_nr; i++) {
-		if ((si->swap_map[offset + i] & SWAP_HAS_CACHE))
-			return i;
-	}
-
-	return i;
-}
-
 /*
  * Check if the PTEs within a range are contiguous swap entries
  * and have consistent swapcache, zeromap.
mm/shmem.c +5 -1
index 0c5fb4ffa03a..3a5a65b1f41a 100644
@@ -2259,6 +2259,7 @@ static int shmem_swapin_folio(struct inode *inode, pgoff_t index,
 	folio = swap_cache_get_folio(swap, NULL, 0);
 	order = xa_get_order(&mapping->i_pages, index);
 	if (!folio) {
+		int nr_pages = 1 << order;
 		bool fallback_order0 = false;
 
 		/* Or update major stats only when swapin succeeds?? */
@@ -2272,9 +2273,12 @@ static int shmem_swapin_folio(struct inode *inode, pgoff_t index,
 		 * If uffd is active for the vma, we need per-page fault
 		 * fidelity to maintain the uffd semantics, then fallback
 		 * to swapin order-0 folio, as well as for zswap case.
+		 * Any existing sub folio in the swap cache also blocks
+		 * mTHP swapin.
 		 */
 		if (order > 0 && ((vma && unlikely(userfaultfd_armed(vma))) ||
-				  !zswap_never_enabled()))
+				  !zswap_never_enabled() ||
+				  non_swapcache_batch(swap, nr_pages) != nr_pages))
 			fallback_order0 = true;
 
 		/* Skip swapcache for synchronous device. */
mm/swap.h +23 -0
index 2269eb9df0af..9096082a915e 100644
@@ -106,6 +106,25 @@ static inline int swap_zeromap_batch(swp_entry_t entry, int max_nr,
 		return find_next_bit(sis->zeromap, end, start) - start;
 }
 
+static inline int non_swapcache_batch(swp_entry_t entry, int max_nr)
+{
+	struct swap_info_struct *si = swp_swap_info(entry);
+	pgoff_t offset = swp_offset(entry);
+	int i;
+
+	/*
+	 * While allocating a large folio and doing mTHP swapin, we need to
+	 * ensure all entries are not cached, otherwise, the mTHP folio will
+	 * be in conflict with the folio in swap cache.
+	 */
+	for (i = 0; i < max_nr; i++) {
+		if ((si->swap_map[offset + i] & SWAP_HAS_CACHE))
+			return i;
+	}
+
+	return i;
+}
+
 #else /* CONFIG_SWAP */
 struct swap_iocb;
 static inline void swap_read_folio(struct folio *folio, struct swap_iocb **plug)
@@ -199,6 +218,10 @@ static inline int swap_zeromap_batch(swp_entry_t entry, int max_nr,
 	return 0;
 }
 
+static inline int non_swapcache_batch(swp_entry_t entry, int max_nr)
+{
+	return 0;
+}
 #endif /* CONFIG_SWAP */
 
 /**
Signature · 1 line
2.49.0
#1 lore raw
Quoted 58 lines · Kairui Song

From: Kairui Song <[email protected]>

Following softlockup can be easily reproduced on my test machine with:

echo always > /sys/kernel/mm/transparent_hugepage/hugepages-64kB/enabled swapon /dev/zram0 # zram0 is a 48G swap device
mkdir -p /sys/fs/cgroup/memory/test
echo 1G > /sys/fs/cgroup/test/memory.max
echo $BASHPID > /sys/fs/cgroup/test/cgroup.procs
while true; do
dd if=/dev/zero of=/tmp/test.img bs=1M count=5120
cat /tmp/test.img > /dev/null
rm /tmp/test.img
done

Then after a while:

watchdog: BUG: soft lockup - CPU#0 stuck for 763s! [cat:5787]
Modules linked in: zram virtiofs
CPU: 0 UID: 0 PID: 5787 Comm: cat Kdump: loaded Tainted: G             L      6.15.0.orig-gf3021d9246bc-dirty #118 PREEMPT(voluntary)·
Tainted: [L]=SOFTLOCKUP
Hardware name: Red Hat KVM/RHEL-AV, BIOS 0.0.0 02/06/2015
RIP: 0010:mpol_shared_policy_lookup+0xd/0x70
Code: e9 b8 b4 ff ff 31 c0 c3 cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 41 54 55 53 <48> 8b 1f 48 85 db 74 41 4c 8d 67 08 48 89 fb 48 89 f5 4c 89 e7 e8
RSP: 0018:ffffc90002b1fc28 EFLAGS: 00000202
RAX: 00000000001c20ca RBX: 0000000000724e1e RCX: 0000000000000001
RDX: ffff888118e214c8 RSI: 0000000000057d42 RDI: ffff888118e21518
RBP: 000000000002bec8 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000bf4 R11: 0000000000000000 R12: 0000000000000001
R13: 00000000001c20ca R14: 00000000001c20ca R15: 0000000000000000
FS:  00007f03f995c740(0000) GS:ffff88a07ad9a000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f03f98f1000 CR3: 0000000144626004 CR4: 0000000000770eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 <TASK>
 shmem_alloc_folio+0x31/0xc0
 shmem_swapin_folio+0x309/0xcf0
 ? filemap_get_entry+0x117/0x1e0
 ? xas_load+0xd/0xb0
 ? filemap_get_entry+0x101/0x1e0
 shmem_get_folio_gfp+0x2ed/0x5b0
 shmem_file_read_iter+0x7f/0x2e0
 vfs_read+0x252/0x330
 ksys_read+0x68/0xf0
 do_syscall_64+0x4c/0x1c0
 entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f03f9a46991
Code: 00 48 8b 15 81 14 10 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd e8 20 ad 01 00 f3 0f 1e fa 80 3d 35 97 10 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 4f c3 66 0f 1f 44 00 00 55 48 89 e5 48 83 ec
RSP: 002b:00007fff3c52bd28 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 0000000000040000 RCX: 00007f03f9a46991
RDX: 0000000000040000 RSI: 00007f03f98ba000 RDI: 0000000000000003
RBP: 00007fff3c52bd50 R08: 0000000000000000 R09: 00007f03f9b9a380
R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000040000
R13: 00007f03f98ba000 R14: 0000000000000003 R15: 0000000000000000
 </TASK>
Quoted 2 lines

The reason is simple, readahead brought some order 0 folio in swap cache, and the swapin mTHP folio being allocated is in confict with it, so

^^^typo, conflict

Quoted 5 lines

swapcache_prepare fails and causes shmem_swap_alloc_folio to return -EEXIST, and shmem simply retries again and again causing this loop.

Fix it by applying a similar fix for anon mTHP swapin.

......snip...

#2 lore raw
Quoted 60 lines · Baoquan He
Quoted 58 lines · Kairui Song

From: Kairui Song <[email protected]>

Following softlockup can be easily reproduced on my test machine with:

echo always > /sys/kernel/mm/transparent_hugepage/hugepages-64kB/enabled swapon /dev/zram0 # zram0 is a 48G swap device
mkdir -p /sys/fs/cgroup/memory/test
echo 1G > /sys/fs/cgroup/test/memory.max
echo $BASHPID > /sys/fs/cgroup/test/cgroup.procs
while true; do
dd if=/dev/zero of=/tmp/test.img bs=1M count=5120
cat /tmp/test.img > /dev/null
rm /tmp/test.img
done

Then after a while:

watchdog: BUG: soft lockup - CPU#0 stuck for 763s! [cat:5787]
Modules linked in: zram virtiofs
CPU: 0 UID: 0 PID: 5787 Comm: cat Kdump: loaded Tainted: G             L      6.15.0.orig-gf3021d9246bc-dirty #118 PREEMPT(voluntary)·
Tainted: [L]=SOFTLOCKUP
Hardware name: Red Hat KVM/RHEL-AV, BIOS 0.0.0 02/06/2015
RIP: 0010:mpol_shared_policy_lookup+0xd/0x70
Code: e9 b8 b4 ff ff 31 c0 c3 cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 41 54 55 53 <48> 8b 1f 48 85 db 74 41 4c 8d 67 08 48 89 fb 48 89 f5 4c 89 e7 e8
RSP: 0018:ffffc90002b1fc28 EFLAGS: 00000202
RAX: 00000000001c20ca RBX: 0000000000724e1e RCX: 0000000000000001
RDX: ffff888118e214c8 RSI: 0000000000057d42 RDI: ffff888118e21518
RBP: 000000000002bec8 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000bf4 R11: 0000000000000000 R12: 0000000000000001
R13: 00000000001c20ca R14: 00000000001c20ca R15: 0000000000000000
FS:  00007f03f995c740(0000) GS:ffff88a07ad9a000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f03f98f1000 CR3: 0000000144626004 CR4: 0000000000770eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
 <TASK>
 shmem_alloc_folio+0x31/0xc0
 shmem_swapin_folio+0x309/0xcf0
 ? filemap_get_entry+0x117/0x1e0
 ? xas_load+0xd/0xb0
 ? filemap_get_entry+0x101/0x1e0
 shmem_get_folio_gfp+0x2ed/0x5b0
 shmem_file_read_iter+0x7f/0x2e0
 vfs_read+0x252/0x330
 ksys_read+0x68/0xf0
 do_syscall_64+0x4c/0x1c0
 entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f03f9a46991
Code: 00 48 8b 15 81 14 10 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd e8 20 ad 01 00 f3 0f 1e fa 80 3d 35 97 10 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 4f c3 66 0f 1f 44 00 00 55 48 89 e5 48 83 ec
RSP: 002b:00007fff3c52bd28 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 0000000000040000 RCX: 00007f03f9a46991
RDX: 0000000000040000 RSI: 00007f03f98ba000 RDI: 0000000000000003
RBP: 00007fff3c52bd50 R08: 0000000000000000 R09: 00007f03f9b9a380
R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000040000
R13: 00007f03f98ba000 R14: 0000000000000003 R15: 0000000000000000
 </TASK>
Quoted 4 lines
Quoted 2 lines

The reason is simple, readahead brought some order 0 folio in swap cache, and the swapin mTHP folio being allocated is in confict with it, so

^^^typo, conflict

Nice catch, thanks!

Hi Andrew, it's only one typo in the commit message here, will you help update the commit message while merging it or should I send a new version?

maintainer
#3 lore raw
Quoted 9 lines · On Thu, 12 Jun 2025 00:06:56 +0800 Kairui Song <[email protected]> wrote:
Quoted 4 lines
Quoted 2 lines

The reason is simple, readahead brought some order 0 folio in swap cache, and the swapin mTHP folio being allocated is in confict with it, so

^^^typo, conflict

Nice catch, thanks!

Hi Andrew, it's only one typo in the commit message here, will you help update the commit message while merging

No probs.

checkpatch can catch these things if the typo is in scripts/spelling.txt.

x1:/usr/src/linux-6.16-rc1> grep -r confict . | wc -l 5
x1:/usr/src/mm> git log | grep confict | wc -l 26

and it seems it should be! I bet Colin can fix that for us.

reviewer Reviewed-by on v3 1/1
#4 lore raw
In reply to Kairui Song
Quoted 67 lines · Kairui Song

From: Kairui Song <[email protected]>

Following softlockup can be easily reproduced on my test machine with:

echo always > /sys/kernel/mm/transparent_hugepage/hugepages-64kB/enabled swapon /dev/zram0 # zram0 is a 48G swap device
mkdir -p /sys/fs/cgroup/memory/test
echo 1G > /sys/fs/cgroup/test/memory.max
echo $BASHPID > /sys/fs/cgroup/test/cgroup.procs
while true; do
dd if=/dev/zero of=/tmp/test.img bs=1M count=5120
cat /tmp/test.img > /dev/null
rm /tmp/test.img
done

Then after a while:

watchdog: BUG: soft lockup - CPU#0 stuck for 763s! [cat:5787]
Modules linked in: zram virtiofs
CPU: 0 UID: 0 PID: 5787 Comm: cat Kdump: loaded Tainted: G             L      6.15.0.orig-gf3021d9246bc-dirty #118 PREEMPT(voluntary)·
Tainted: [L]=SOFTLOCKUP
Hardware name: Red Hat KVM/RHEL-AV, BIOS 0.0.0 02/06/2015
RIP: 0010:mpol_shared_policy_lookup+0xd/0x70
Code: e9 b8 b4 ff ff 31 c0 c3 cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 41 54 55 53 <48> 8b 1f 48 85 db 74 41 4c 8d 67 08 48 89 fb 48 89 f5 4c 89 e7 e8
RSP: 0018:ffffc90002b1fc28 EFLAGS: 00000202
RAX: 00000000001c20ca RBX: 0000000000724e1e RCX: 0000000000000001
RDX: ffff888118e214c8 RSI: 0000000000057d42 RDI: ffff888118e21518
RBP: 000000000002bec8 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000bf4 R11: 0000000000000000 R12: 0000000000000001
R13: 00000000001c20ca R14: 00000000001c20ca R15: 0000000000000000
FS:  00007f03f995c740(0000) GS:ffff88a07ad9a000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f03f98f1000 CR3: 0000000144626004 CR4: 0000000000770eb0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
  <TASK>
  shmem_alloc_folio+0x31/0xc0
  shmem_swapin_folio+0x309/0xcf0
  ? filemap_get_entry+0x117/0x1e0
  ? xas_load+0xd/0xb0
  ? filemap_get_entry+0x101/0x1e0
  shmem_get_folio_gfp+0x2ed/0x5b0
  shmem_file_read_iter+0x7f/0x2e0
  vfs_read+0x252/0x330
  ksys_read+0x68/0xf0
  do_syscall_64+0x4c/0x1c0
  entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f03f9a46991
Code: 00 48 8b 15 81 14 10 00 f7 d8 64 89 02 b8 ff ff ff ff eb bd e8 20 ad 01 00 f3 0f 1e fa 80 3d 35 97 10 00 00 74 13 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 4f c3 66 0f 1f 44 00 00 55 48 89 e5 48 83 ec
RSP: 002b:00007fff3c52bd28 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 0000000000040000 RCX: 00007f03f9a46991
RDX: 0000000000040000 RSI: 00007f03f98ba000 RDI: 0000000000000003
RBP: 00007fff3c52bd50 R08: 0000000000000000 R09: 00007f03f9b9a380
R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000040000
R13: 00007f03f98ba000 R14: 0000000000000003 R15: 0000000000000000
  </TASK>

The reason is simple, readahead brought some order 0 folio in swap cache, and the swapin mTHP folio being allocated is in confict with it, so swapcache_prepare fails and causes shmem_swap_alloc_folio to return -EEXIST, and shmem simply retries again and again causing this loop.

Fix it by applying a similar fix for anon mTHP swapin.

The performance change is very slight, time of swapin 10g zero folios with shmem (test for 12 times):

Quoted 7 lines
Before:  2.47s
After:   2.48s
Fixes 1dd44c0af4fa1 ("mm: shmem: skip swapcache for swapin of synchronous swap device")

LGTM. Thanks.

Quoted 118 lines

---

V1: https://lore.kernel.org/linux-mm/[email protected]/
Updates:
- Move non_swapcache_batch check before swapcache_prepare, I was expecting this could improve the performance, turns out it barely helps and may even cause more overhead in some cases. [ Barry Song ]
- Remove zero map check, no need to do that for shmem [ Barry Song, Baolin Wang ]
- Fix build bot error.

V2: https://lore.kernel.org/linux-mm/[email protected]/
Updates:
- Minor comment adjustment [ Nhat Pham ]

  mm/memory.c | 20 --------------------
  mm/shmem.c  |  6 +++++-
  mm/swap.h   | 23 +++++++++++++++++++++++
  3 files changed, 28 insertions(+), 21 deletions(-)
mm/memory.c +0 -20
index 8eba595056fe..b0cda5aab398 100644
@@ -4315,26 +4315,6 @@ static struct folio *__alloc_swap_folio(struct vm_fault *vmf)
  }
 
  #ifdef CONFIG_TRANSPARENT_HUGEPAGE
-static inline int non_swapcache_batch(swp_entry_t entry, int max_nr)
-{
-	struct swap_info_struct *si = swp_swap_info(entry);
-	pgoff_t offset = swp_offset(entry);
-	int i;
-
-	/*
-	 * While allocating a large folio and doing swap_read_folio, which is
-	 * the case the being faulted pte doesn't have swapcache. We need to
-	 * ensure all PTEs have no cache as well, otherwise, we might go to
-	 * swap devices while the content is in swapcache.
-	 */
-	for (i = 0; i < max_nr; i++) {
-		if ((si->swap_map[offset + i] & SWAP_HAS_CACHE))
-			return i;
-	}
-
-	return i;
-}
-
  /*
   * Check if the PTEs within a range are contiguous swap entries
   * and have consistent swapcache, zeromap.
mm/shmem.c +5 -1
index 0c5fb4ffa03a..3a5a65b1f41a 100644
@@ -2259,6 +2259,7 @@ static int shmem_swapin_folio(struct inode *inode, pgoff_t index,
  	folio = swap_cache_get_folio(swap, NULL, 0);
  	order = xa_get_order(&mapping->i_pages, index);
  	if (!folio) {
+		int nr_pages = 1 << order;
  		bool fallback_order0 = false;
 
  		/* Or update major stats only when swapin succeeds?? */
@@ -2272,9 +2273,12 @@ static int shmem_swapin_folio(struct inode *inode, pgoff_t index,
  		 * If uffd is active for the vma, we need per-page fault
  		 * fidelity to maintain the uffd semantics, then fallback
  		 * to swapin order-0 folio, as well as for zswap case.
+		 * Any existing sub folio in the swap cache also blocks
+		 * mTHP swapin.
  		 */
  		if (order > 0 && ((vma && unlikely(userfaultfd_armed(vma))) ||
-				  !zswap_never_enabled()))
+				  !zswap_never_enabled() ||
+				  non_swapcache_batch(swap, nr_pages) != nr_pages))
  			fallback_order0 = true;
 
  		/* Skip swapcache for synchronous device. */
mm/swap.h +23 -0
index 2269eb9df0af..9096082a915e 100644
@@ -106,6 +106,25 @@ static inline int swap_zeromap_batch(swp_entry_t entry, int max_nr,
  		return find_next_bit(sis->zeromap, end, start) - start;
  }
 
+static inline int non_swapcache_batch(swp_entry_t entry, int max_nr)
+{
+	struct swap_info_struct *si = swp_swap_info(entry);
+	pgoff_t offset = swp_offset(entry);
+	int i;
+
+	/*
+	 * While allocating a large folio and doing mTHP swapin, we need to
+	 * ensure all entries are not cached, otherwise, the mTHP folio will
+	 * be in conflict with the folio in swap cache.
+	 */
+	for (i = 0; i < max_nr; i++) {
+		if ((si->swap_map[offset + i] & SWAP_HAS_CACHE))
+			return i;
+	}
+
+	return i;
+}
+
  #else /* CONFIG_SWAP */
  struct swap_iocb;
  static inline void swap_read_folio(struct folio *folio, struct swap_iocb **plug)
@@ -199,6 +218,10 @@ static inline int swap_zeromap_batch(swp_entry_t entry, int max_nr,
  	return 0;
  }
 
+static inline int non_swapcache_batch(swp_entry_t entry, int max_nr)
+{
+	return 0;
+}
  #endif /* CONFIG_SWAP */
 
  /**