dt-bindings: timer: Convert faraday,fttmr010 to DT schema
Subsystems (2)
Rob Herring (Arm)
maintainerPATCH v2 1/1 dt-bindings: timer: Convert faraday,fttmr010 to DT schema
Convert the Faraday fttmr010 Timer binding to DT schema format. Adjust the compatible string values to match what's in use. The number of interrupts can also be anywhere from 1 to 8. The clock-names order was reversed compared to what's used.
---
v2:
- Fix clock-names order in example
--- .../bindings/timer/faraday,fttmr010.txt | 38 -------- .../bindings/timer/faraday,fttmr010.yaml | 89 +++++++++++++++++++ 2 files changed, 89 insertions(+), 38 deletions(-) delete mode 100644 Documentation/devicetree/bindings/timer/faraday,fttmr010.txt create mode 100644 Documentation/devicetree/bindings/timer/faraday,fttmr010.yaml
Documentation/devicetree/bindings/timer/faraday,fttmr010.txt deleted +0 -38
@@ -1,38 +0,0 @@ -Faraday Technology timer - -This timer is a generic IP block from Faraday Technology, embedded in the -Cortina Systems Gemini SoCs and other designs. - -Required properties: - -- compatible : Must be one of - "faraday,fttmr010" - "cortina,gemini-timer", "faraday,fttmr010" - "moxa,moxart-timer", "faraday,fttmr010" - "aspeed,ast2400-timer" - "aspeed,ast2500-timer" - "aspeed,ast2600-timer" - -- reg : Should contain registers location and length -- interrupts : Should contain the three timer interrupts usually with - flags for falling edge - -Optionally required properties: - -- clocks : a clock to provide the tick rate for "faraday,fttmr010" -- clock-names : should be "EXTCLK" and "PCLK" for the external tick timer - and peripheral clock respectively, for "faraday,fttmr010" -- syscon : a phandle to the global Gemini system controller if the compatible - type is "cortina,gemini-timer" - -Example: - -timer@43000000 { - compatible = "faraday,fttmr010"; - reg = <0x43000000 0x1000>; - interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */ - <15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */ - <16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */ - clocks = <&extclk>, <&pclk>; - clock-names = "EXTCLK", "PCLK"; -};
Documentation/devicetree/bindings/timer/faraday,fttmr010.yaml new file +89 -0
89 lines not on this page · raw message
Signature · 1 line
2.47.2
Daniel Lezcano
AppliedQuoted 8 lines · Rob Herring
Convert the Faraday fttmr010 Timer binding to DT schema format. Adjust the compatible string values to match what's in use. The number of interrupts can also be anywhere from 1 to 8. The clock-names order was reversed compared to what's used.
Reviewed-by Linus Walleij <[email protected]>Signed-off-by Rob Herring (Arm) <[email protected]>---
Applied, thanks
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
The following commit has been merged into the timers/clocksource branch of tip:
The following commit has been merged into the timers/clocksource branch of tip:
Commit-ID: 253a421da69f79e41115b6c083e6c8bc833c5af4 Gitweb: https://git.kernel.org/tip/253a421da69f79e41115b6c083e6c8bc833c5af4 Author: Rob Herring (Arm) <[email protected]> AuthorDate: Wed, 11 Jun 2025 18:26:20 -05:00 Committer: Daniel Lezcano <[email protected]> CommitterDate: Thu, 10 Jul 2025 11:28:29 +02:00
dt-bindings: timer: Convert faraday,fttmr010 to DT schema
Convert the Faraday fttmr010 Timer binding to DT schema format. Adjust the compatible string values to match what's in use. The number of interrupts can also be anywhere from 1 to 8. The clock-names order was reversed compared to what's used.
--- Documentation/devicetree/bindings/timer/faraday,fttmr010.txt | 38 +--- Documentation/devicetree/bindings/timer/faraday,fttmr010.yaml | 89 +++++++- 2 files changed, 89 insertions(+), 38 deletions(-) delete mode 100644 Documentation/devicetree/bindings/timer/faraday,fttmr010.txt create mode 100644 Documentation/devicetree/bindings/timer/faraday,fttmr010.yaml
Documentation/devicetree/bindings/timer/faraday,fttmr010.txt deleted +0 -38
@@ -1,38 +0,0 @@ -Faraday Technology timer - -This timer is a generic IP block from Faraday Technology, embedded in the -Cortina Systems Gemini SoCs and other designs. - -Required properties: - -- compatible : Must be one of - "faraday,fttmr010" - "cortina,gemini-timer", "faraday,fttmr010" - "moxa,moxart-timer", "faraday,fttmr010" - "aspeed,ast2400-timer" - "aspeed,ast2500-timer" - "aspeed,ast2600-timer" - -- reg : Should contain registers location and length -- interrupts : Should contain the three timer interrupts usually with - flags for falling edge - -Optionally required properties: - -- clocks : a clock to provide the tick rate for "faraday,fttmr010" -- clock-names : should be "EXTCLK" and "PCLK" for the external tick timer - and peripheral clock respectively, for "faraday,fttmr010" -- syscon : a phandle to the global Gemini system controller if the compatible - type is "cortina,gemini-timer" - -Example: - -timer@43000000 { - compatible = "faraday,fttmr010"; - reg = <0x43000000 0x1000>; - interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */ - <15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */ - <16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */ - clocks = <&extclk>, <&pclk>; - clock-names = "EXTCLK", "PCLK"; -};
Documentation/devicetree/bindings/timer/faraday,fttmr010.yaml new file +89 -0
89 lines not on this page · raw message
The following commit has been merged into the timers/clocksource branch of tip:
The following commit has been merged into the timers/clocksource branch of tip:
Commit-ID: 7276dac8cd12b56c5120cf127380b7be15824047 Gitweb: https://git.kernel.org/tip/7276dac8cd12b56c5120cf127380b7be15824047 Author: Rob Herring (Arm) <[email protected]> AuthorDate: Wed, 11 Jun 2025 18:26:20 -05:00 Committer: Ingo Molnar <[email protected]> CommitterDate: Fri, 25 Jul 2025 11:45:00 +02:00
dt-bindings: timer: Convert faraday,fttmr010 to DT schema
Convert the Faraday fttmr010 Timer binding to DT schema format. Adjust the compatible string values to match what's in use. The number of interrupts can also be anywhere from 1 to 8. The clock-names order was reversed compared to what's used.
--- Documentation/devicetree/bindings/timer/faraday,fttmr010.txt | 38 +--- Documentation/devicetree/bindings/timer/faraday,fttmr010.yaml | 89 +++++++- 2 files changed, 89 insertions(+), 38 deletions(-) delete mode 100644 Documentation/devicetree/bindings/timer/faraday,fttmr010.txt create mode 100644 Documentation/devicetree/bindings/timer/faraday,fttmr010.yaml
Documentation/devicetree/bindings/timer/faraday,fttmr010.txt deleted +0 -38
@@ -1,38 +0,0 @@ -Faraday Technology timer - -This timer is a generic IP block from Faraday Technology, embedded in the -Cortina Systems Gemini SoCs and other designs. - -Required properties: - -- compatible : Must be one of - "faraday,fttmr010" - "cortina,gemini-timer", "faraday,fttmr010" - "moxa,moxart-timer", "faraday,fttmr010" - "aspeed,ast2400-timer" - "aspeed,ast2500-timer" - "aspeed,ast2600-timer" - -- reg : Should contain registers location and length -- interrupts : Should contain the three timer interrupts usually with - flags for falling edge - -Optionally required properties: - -- clocks : a clock to provide the tick rate for "faraday,fttmr010" -- clock-names : should be "EXTCLK" and "PCLK" for the external tick timer - and peripheral clock respectively, for "faraday,fttmr010" -- syscon : a phandle to the global Gemini system controller if the compatible - type is "cortina,gemini-timer" - -Example: - -timer@43000000 { - compatible = "faraday,fttmr010"; - reg = <0x43000000 0x1000>; - interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */ - <15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */ - <16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */ - clocks = <&extclk>, <&pclk>; - clock-names = "EXTCLK", "PCLK"; -};
Documentation/devicetree/bindings/timer/faraday,fttmr010.yaml new file +89 -0
89 lines not on this page · raw message