lib/crypto: mips/chacha: Fix clang build and remove unneeded byteswap
Subsystems (4)
Eric Biggers
maintainerPATCH 1/1 lib/crypto: mips/chacha: Fix clang build and remove unneeded byteswap
The MIPS32r2 ChaCha code has never been buildable with the clang assembler. First, clang doesn't support the 'rotl' pseudo-instruction:
error: unknown instruction, did you mean: rol, rotr?
Second, clang requires that both operands of the 'wsbh' instruction be explicitly given:
error: too few operands for instruction
To fix this, align the code with the real instruction set by (1) using the real instruction 'rotr' instead of the nonstandard pseudo- instruction 'rotl', and (2) explicitly giving both operands to 'wsbh'.
To make removing the use of 'rotl' a bit easier, also remove the unnecessary special-casing for big endian CPUs at .Lchacha_mips_xor_bytes. The tail handling is actually endian-independent since it processes one byte at a time. On big endian CPUs the old code byte-swapped SAVED_X, then iterated through it in reverse order. But the byteswap and reverse iteration canceled out.
Tested with chacha20poly1305-selftest in QEMU using "-M malta" with both little endian and big endian mips32r2 kernels.
---
This applies on top of other pending lib/crypto patches and can be retrieved from git at:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux.git mips-chacha-fix
lib/crypto/mips/chacha-core.S | 20 +++++++------------- 1 file changed, 7 insertions(+), 13 deletions(-)
lib/crypto/mips/chacha-core.S +7 -13
@@ -53,21 +53,17 @@ #define IS_UNALIGNED $s7 #if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__ #define MSB 0 #define LSB 3 -#define ROTx rotl -#define ROTR(n) rotr n, 24 #define CPU_TO_LE32(n) \ - wsbh n; \ + wsbh n, n; \ rotr n, 16; #else #define MSB 3 #define LSB 0 -#define ROTx rotr #define CPU_TO_LE32(n) -#define ROTR(n) #endif #define FOR_EACH_WORD(x) \ x( 0); \ x( 1); \
@@ -190,14 +186,14 @@ CONCAT3(.Lchacha_mips_xor_aligned_, PLUS_ONE(x), _b: ;) \ addu X(D), X(N); \ xor X(V), X(A); \ xor X(W), X(B); \ xor X(Y), X(C); \ xor X(Z), X(D); \ - rotl X(V), S; \ - rotl X(W), S; \ - rotl X(Y), S; \ - rotl X(Z), S; + rotr X(V), 32 - S; \ + rotr X(W), 32 - S; \ + rotr X(Y), 32 - S; \ + rotr X(Z), 32 - S; .text .set reorder .set noat .globl chacha_crypt_arch
@@ -370,25 +366,23 @@ chacha_crypt_arch: addu IN, $at addu OUT, $at /* First byte */ lbu T1, 0(IN) addiu $at, BYTES, 1 - CPU_TO_LE32(SAVED_X) - ROTR(SAVED_X) xor T1, SAVED_X sb T1, 0(OUT) beqz $at, .Lchacha_mips_xor_done /* Second byte */ lbu T1, 1(IN) addiu $at, BYTES, 2 - ROTx SAVED_X, 8 + rotr SAVED_X, 8 xor T1, SAVED_X sb T1, 1(OUT) beqz $at, .Lchacha_mips_xor_done /* Third byte */ lbu T1, 2(IN) - ROTx SAVED_X, 8 + rotr SAVED_X, 8 xor T1, SAVED_X sb T1, 2(OUT) b .Lchacha_mips_xor_done .Lchacha_mips_no_full_block_unaligned:
Signature · 1 line
2.50.0
Quoted 31 lines · Eric Biggers
The MIPS32r2 ChaCha code has never been buildable with the clang assembler. First, clang doesn't support the 'rotl' pseudo-instruction:
error: unknown instruction, did you mean: rol, rotr?
Second, clang requires that both operands of the 'wsbh' instruction be explicitly given:
error: too few operands for instruction
To fix this, align the code with the real instruction set by (1) using the real instruction 'rotr' instead of the nonstandard pseudo- instruction 'rotl', and (2) explicitly giving both operands to 'wsbh'.
To make removing the use of 'rotl' a bit easier, also remove the unnecessary special-casing for big endian CPUs at .Lchacha_mips_xor_bytes. The tail handling is actually endian-independent since it processes one byte at a time. On big endian CPUs the old code byte-swapped
SAVED_X, then iterated through it in reverse order. But the byteswap and reverse iteration canceled out.Tested with chacha20poly1305-selftest in QEMU using "-M malta" with both little endian and big endian mips32r2 kernels.
Fixes 49aa7c00eddf ("crypto: mips/chacha - import 32r2 ChaCha code from Zinc")Reported-by kernel test robot <[email protected]>Signed-off-by Eric Biggers <[email protected]>---
Quoted 7 lines
This applies on top of other pending lib/crypto patches and can be retrieved from git at:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux.git mips-chacha-fix
lib/crypto/mips/chacha-core.S | 20 +++++++------------- 1 file changed, 7 insertions(+), 13 deletions(-)
Applied to https://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux.git/log/?h=libcrypto-next
- Eric