dt-bindings: leds: ncp5623: Add 0x39 as a valid I2C address
Subsystems (2)
PATCH 1/1 dt-bindings: leds: ncp5623: Add 0x39 as a valid I2C address
The NCP5623C variant has the I2C address at 0x39 according its datasheet:
https://www.mouser.com/datasheet/2/308/NCP5623C-D-64591.pdf
Make 0x39 a valid I2C address in the dt-binding.
--- Documentation/devicetree/bindings/leds/onnn,ncp5623.yaml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/leds/onnn,ncp5623.yaml +3 -1
@@ -19,7 +19,9 @@ properties: - onnn,ncp5623 reg: - const: 0x38 + enum: + - 0x38 + - 0x39 multi-led: type: object
Signature · 1 line
2.34.1
Quoted 11 lines · Fabio Estevam
The NCP5623C variant has the I2C address at
0x39according its datasheet:https://www.mouser.com/datasheet/2/308/NCP5623C-D-64591.pdf
Make
0x39a valid I2C address in the dt-binding.Signed-off-by Fabio Estevam <[email protected]>--- Documentation/devicetree/bindings/leds/onnn,ncp5623.yaml | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
Re: (subset) [PATCH] dt-bindings: leds: ncp5623: Add 0x39 as a valid I2C address
In reply to Fabio EstevamQuoted 8 lines · Fabio Estevam
The NCP5623C variant has the I2C address at
0x39according its datasheet:https://www.mouser.com/datasheet/2/308/NCP5623C-D-64591.pdf
Make
0x39a valid I2C address in the dt-binding.[...]
Applied, thanks!
[1/1] dt-bindings: leds: ncp5623: Add 0x39 as a valid I2C address
commit: 4903924ac7ef31fbbe48b3261b1bc86ce6cd7e97
--
Lee Jones [李琼斯]