i2c: Kconfig: Tighten some i2c driver dependencies
PATCH v2 1/1 i2c: Kconfig: Tighten some i2c driver dependencies
A few i2c drivers cannot build without access to some platform specific header files. Express those requirements in Kconfig as well.
Signed-off-by Tom Rini <[email protected]>
---
Changes in v2:
- Correct dependencies on SYS_I2C_MXC
Cc Heiko Schocher <[email protected]>
--- drivers/i2c/Kconfig | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)
drivers/i2c/Kconfig +8 -3
@@ -181,6 +181,7 @@ config SYS_I2C_IPROC config SYS_I2C_FSL bool "Freescale I2C bus driver" + depends on M68K || PPC help Add support for Freescale I2C busses as used on MPC8240, MPC8245, and MPC85xx processors.
@@ -240,7 +241,7 @@ config SYS_I2C_DW config SYS_I2C_DW_PCI bool "Designware PCI I2C Controller" - depends on SYS_I2C_DW && PCI && ACPIGEN + depends on SYS_I2C_DW && PCI && ACPIGEN && X86 default y help Say yes here to select the Designware PCI I2C Host Controller.
@@ -277,6 +278,7 @@ config SYS_I2C_INTEL config SYS_I2C_IMX_LPI2C bool "NXP i.MX LPI2C driver" + depends on MACH_IMX help Add support for the NXP i.MX LPI2C driver.
@@ -314,6 +316,7 @@ config SYS_I2C_MICROCHIP config SYS_I2C_MXC bool "NXP MXC I2C driver" + depends on ARCH_LS1021A || FSL_LSCH2 || FSL_LSCH3 || MACH_IMX help Add support for the NXP I2C driver. This supports up to four bus channels and operating on standard mode up to 100 kbits/s and fast
@@ -485,7 +488,7 @@ endif config SYS_I2C_NEXELL bool "Nexell I2C driver" - depends on DM_I2C + depends on DM_I2C && ARCH_NEXELL help Add support for the Nexell I2C driver. This is used with various Nexell parts such as S5Pxx18 series SoCs. All chips
@@ -494,6 +497,7 @@ config SYS_I2C_NEXELL config SYS_I2C_NPCM bool "Nuvoton NPCM I2C driver" + depends on ARCH_NPCM help Support for Nuvoton I2C controller driver.
@@ -533,7 +537,7 @@ config SYS_I2C_RCAR_IIC config SYS_I2C_ROCKCHIP bool "Rockchip I2C driver" - depends on DM_I2C + depends on DM_I2C && ARCH_ROCKCHIP help Add support for the Rockchip I2C driver. This is used with various Rockchip parts such as RK3126, RK3128, RK3036 and RK3288. All chips
@@ -750,6 +754,7 @@ config SYS_I2C_MV config SYS_I2C_MVTWSI bool "Marvell I2C driver" + depends on ARCH_KIRKWOOD || ARCH_MVEBU || ARCH_SUNXI help Support for Marvell I2C controllers as used on the orion5x and kirkwood SoC families.
Signature · 1 line
2.43.0