Skip to contentSkip to conversation

Add Onion Omega2/2+ board support

PATCH Superseded Philip Oberfichtner 3 participants 12 messages Jul 8, 2025 – Jul 30, 2025

Subsystems (3)

v4 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

v4 cover Add Onion Omega2/2+ board support

Add support for the MediaTek based boards by Onion. Commit one and two are rather generic, whereas the third commit adds the actual board support.

Changes in v4:
- Rebase board support to v2025.07
- Add new commit to silence warning in arch/mips/

Changes in v3:
- Simplify image size check

Changes in v2:
- I forgot to run checkpatch in v1. Fix some style issues in v2.

Philip Oberfichtner (3):
Makefile: Add size check for u-boot-with-spl.bin
mips: serial: Silence "unused variable" warning
mips: mt7628: Add Onion Omega2/2+ board support

 Makefile                                  |   1 +
 arch/mips/dts/Makefile                    |   1 +
 arch/mips/dts/onion-omega2p.dts           |  58 ++++++++++
 arch/mips/mach-mtmips/mt7620/serial.c     |   2 +-
 arch/mips/mach-mtmips/mt7621/spl/serial.c |   2 +-
 arch/mips/mach-mtmips/mt7628/Kconfig      |   7 ++
 arch/mips/mach-mtmips/mt7628/serial.c     |   2 +-
 board/onion/omega2p/Kconfig               |  12 ++
 board/onion/omega2p/MAINTAINERS           |  10 ++
 board/onion/omega2p/Makefile              |   3 +
 board/onion/omega2p/board.c               | 134 ++++++++++++++++++++++
 board/onion/omega2p/omega2p.env           |  32 ++++++
 common/spl/Kconfig                        |   2 +-
 configs/onion-omega2p_defconfig           |  82 +++++++++++++
 include/configs/onion-omega2p.h           |  15 +++
 15 files changed, 359 insertions(+), 4 deletions(-)
 create mode 100644 arch/mips/dts/onion-omega2p.dts
 create mode 100644 board/onion/omega2p/Kconfig
 create mode 100644 board/onion/omega2p/MAINTAINERS
 create mode 100644 board/onion/omega2p/Makefile
 create mode 100644 board/onion/omega2p/board.c
 create mode 100644 board/onion/omega2p/omega2p.env
 create mode 100644 configs/onion-omega2p_defconfig
 create mode 100644 include/configs/onion-omega2p.h
Signature · 1 line
2.39.5
#1 lore raw

PATCH v4 1/3 Makefile: Add size check for u-boot-with-spl.bin

Like other images, u-boot-with-spl.bin may be subject to size restrictions. Extend CONFIG_SPL_SIZE_LIMIT to handle this case.

---

Notes:
Changes in v4: none

Changes in v3:
Reuse existing SPL_SIZE_LIMIT instead of implementing a new option

Changes in v2: none

 Makefile           | 1 +
 common/spl/Kconfig | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)
Makefile +1 -0
index fa9ce756083..791c00713ec 100644
@@ -1545,6 +1545,7 @@ OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
 				   --pad-to=$(CONFIG_SPL_PAD_TO)
 u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE
 	$(call if_changed,pad_cat)
+	$(SPL_SIZE_CHECK)
 
 ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy)
 MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
common/spl/Kconfig +1 -1
index 9a17ccb2d3d..dcb25b593f1 100644
@@ -43,7 +43,7 @@ config SPL_SIZE_LIMIT
 	default 0x30000 if ARCH_MVEBU && ARMADA_32BIT
 	default 0x0
 	help
-	  Specifies the maximum length of the U-Boot SPL image.
+	  Specifies the maximum length of U-Boot SPL images.
 	  If this value is zero, it is ignored.
 
 config SPL_SIZE_LIMIT_SUBTRACT_GD
Signature · 1 line
2.39.5
#2 lore raw

Re: [PATCH v4 1/3] Makefile: Add size check for u-boot-with-spl.bin

Hi Philip,

Quoted 24 lines · Philip Oberfichtner

Like other images, u-boot-with-spl.bin may be subject to size restrictions. Extend CONFIG_SPL_SIZE_LIMIT to handle this case.

---

Notes:
Changes in v4: none

Changes in v3:
Reuse existing SPL_SIZE_LIMIT instead of implementing a new option

Changes in v2: none

 Makefile           | 1 +
 common/spl/Kconfig | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)
Makefile +0 -0
index fa9ce756083..791c00713ec 100644

Makefile OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \ · line 1548

Quoted 4 lines
Makefile +1 -0
@@ -1545,6 +1545,7 @@ OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
                                   --pad-to=$(CONFIG_SPL_PAD_TO)
 u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE
        $(call if_changed,pad_cat)
+       $(SPL_SIZE_CHECK)

There's a rule in the Makefile
ifneq ($(CONFIG_SPL_SIZE_LIMIT),0x0)
SPL_SIZE_CHECK = @$(call size_check,$@,$$(tools/spl_size_limit)) else
SPL_SIZE_CHECK =
endif

and

isn't this running?

Thanks
/Ilias

Quoted 19 lines
Makefile +0 -0
 ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy)
 MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
common/spl/Kconfig +1 -2
index 9a17ccb2d3d..dcb25b593f1 100644
@@ -43,7 +43,7 @@ config SPL_SIZE_LIMIT
        default 0x30000 if ARCH_MVEBU && ARMADA_32BIT
        default 0x0
        help
-         Specifies the maximum length of the U-Boot SPL image.
+         Specifies the maximum length of U-Boot SPL images.
          If this value is zero, it is ignored.
 
 config SPL_SIZE_LIMIT_SUBTRACT_GD
--

2.39.5

#3 lore raw

Re: [PATCH v4 1/3] Makefile: Add size check for u-boot-with-spl.bin

Hi Ilias,

Thanks for having a look at this!

Quoted 17 lines · Ilias Apalodimas

Makefile OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \ · line 1548

Quoted 9 lines
Makefile +1 -0
index fa9ce756083..791c00713ec 100644
@@ -1545,6 +1545,7 @@ OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
                                   --pad-to=$(CONFIG_SPL_PAD_TO)
 u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE
        $(call if_changed,pad_cat)
+       $(SPL_SIZE_CHECK)

There's a rule in the Makefile
ifneq ($(CONFIG_SPL_SIZE_LIMIT),0x0)
SPL_SIZE_CHECK = @$(call size_check,$@,$$(tools/spl_size_limit)) else
SPL_SIZE_CHECK =
endif

Quoted 3 lines

and

isn't this running?

Well, before this patch it only ran for the u-boot-spl.bin target. But I also need it for the combined u-boot-with-spl.bin image.

I'm not sure if this answers your question?

Just for reference I'll put a link to the previous discussion with Tom:
https://patchwork.ozlabs.org/project/uboot/patch/[email protected]/

Best regards,
Philip

Quoted 4 lines

Thanks
/Ilias

#4 lore raw

Re: [PATCH v4 1/3] Makefile: Add size check for u-boot-with-spl.bin

Hi Philip

Quoted 25 lines · Philip Oberfichtner

Hi Ilias,

Thanks for having a look at this!

Quoted 19 lines · Ilias Apalodimas

Makefile OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \ · line 1548

Quoted 9 lines
Makefile +1 -0
index fa9ce756083..791c00713ec 100644
@@ -1545,6 +1545,7 @@ OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
                                   --pad-to=$(CONFIG_SPL_PAD_TO)
 u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE
        $(call if_changed,pad_cat)
+       $(SPL_SIZE_CHECK)

There's a rule in the Makefile
ifneq ($(CONFIG_SPL_SIZE_LIMIT),0x0)
SPL_SIZE_CHECK = @$(call size_check,$@,$$(tools/spl_size_limit)) else
SPL_SIZE_CHECK =
endif

and

Quoted 7 lines
Quoted 1 line

isn't this running?

Well, before this patch it only ran for the u-boot-spl.bin target. But I also need it for the combined u-boot-with-spl.bin image.

I'm not sure if this answers your question?

It does, I misread your email

Quoted 4 lines

Just for reference I'll put a link to the previous discussion with Tom:
https://patchwork.ozlabs.org/project/uboot/patch/[email protected]/

Thanks for the reference

/Ilias

Quoted 9 lines

Best regards,
Philip

Quoted 4 lines

Thanks
/Ilias

#5 lore raw

Re: [PATCH v4 1/3] Makefile: Add size check for u-boot-with-spl.bin

In reply to Philip Oberfichtner
Quoted 9 lines · Philip Oberfichtner

Like other images, u-boot-with-spl.bin may be subject to size restrictions. Extend CONFIG_SPL_SIZE_LIMIT to handle this case.

---

Notes:
Changes in v4: none

Quoted 8 lines

Changes in v3:
Reuse existing SPL_SIZE_LIMIT instead of implementing a new option

Changes in v2: none

 Makefile           | 1 +
 common/spl/Kconfig | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

This is not quite right enough, sorry. This causes a number of boards (evb-ast2600 ibm-sbp1 stm32746g-eval_spl stm32f746-disco_spl stm32f769-disco_spl) which have size checks and are fine to now fail their size checks, presumably because they're checking the "wrong" file now or similar. So if you can't see a way to fix both them and your board then sigh, I was wrong initially and we will need another size check method like you proposed to start with.

Signature · 1 line
Tom
#6 lore raw

Re: [PATCH v4 1/3] Makefile: Add size check for u-boot-with-spl.bin

Hi Tom,

Quoted 20 lines · Tom Rini
Quoted 9 lines · Philip Oberfichtner

Like other images, u-boot-with-spl.bin may be subject to size restrictions. Extend CONFIG_SPL_SIZE_LIMIT to handle this case.

---

Notes:
Changes in v4: none

Quoted 8 lines

Changes in v3:
Reuse existing SPL_SIZE_LIMIT instead of implementing a new option

Changes in v2: none

 Makefile           | 1 +
 common/spl/Kconfig | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)
Quoted 5 lines

This is not quite right enough, sorry. This causes a number of boards (evb-ast2600 ibm-sbp1 stm32746g-eval_spl stm32f746-disco_spl stm32f769-disco_spl) which have size checks and are fine to now fail their size checks, presumably because they're checking the "wrong" file now or similar.

Thanks for pointing that out. To sum it up: If those boards use SPL_SIZE_LIMIT to restrict the size of an SPL-only image, then u-boot-with-spl.bin, of course, can be too large and the build fails.

Plus in our previous discussion, we figured out why using BOARD_SIZE_LIMIT also isn't suitable:
https://lore.kernel.org/u-boot/aD2EflR9DRYG-MY5@antares/

So from here I really don't see any better way than introducing yet another CONFIG_*SIZE_LIMIT option.

But maybe we can however simplify and deduplicate some of the code. What do you think about something like that (I have not yet tested it, just a rough idea so far):

Makefile +11 -35
index 32c036d531d..6f75b371e11 100644
@@ -372,7 +372,7 @@ endif
 define size_check
 	actual=$$( wc -c $1 | awk '{print $$1}'); \
 	limit=$$( printf "%d" $2 ); \
-	if test $$actual -gt $$limit; then \
+	if test $$limit -gt 0 && test $$actual -gt $$limit; then \
 		echo "$1 exceeds file size limit:" >&2; \
 		echo "  limit:  $$(printf %#x $$limit) bytes" >&2; \
 		echo "  actual: $$(printf %#x $$actual) bytes" >&2; \
@@ -939,30 +939,6 @@ LDPPFLAGS += \
 #########################################################################
 #########################################################################
 
-ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
-BOARD_SIZE_CHECK= @ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT))
-else
-BOARD_SIZE_CHECK =
-endif
-
-ifneq ($(CONFIG_SPL_SIZE_LIMIT),0x0)
-SPL_SIZE_CHECK = @$(call size_check,$@,$$(tools/spl_size_limit))
-else
-SPL_SIZE_CHECK =
-endif
-
-ifneq ($(CONFIG_TPL_SIZE_LIMIT),0x0)
-TPL_SIZE_CHECK = @$(call size_check,$@,$(CONFIG_TPL_SIZE_LIMIT))
-else
-TPL_SIZE_CHECK =
-endif
-
-ifneq ($(CONFIG_VPL_SIZE_LIMIT),0x0)
-VPL_SIZE_CHECK = @$(call size_check,$@,$(CONFIG_VPL_SIZE_LIMIT))
-else
-VPL_SIZE_CHECK =
-endif
-
 # Statically apply RELA-style relocations (currently arm64 only)
 # This is useful for arm64 where static relocation needs to be performed on
 # the raw binary, but certain simulators only accept an ELF file (but don't
@@ -1266,7 +1242,7 @@ endif
 
 %.imx: $(IMX_DEPS) %.bin
 	$(Q)$(MAKE) $(build)=arch/arm/mach-imx $@
-	$(BOARD_SIZE_CHECK)
+	@ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT))
 
 %.vyb: %.imx
 	$(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@
@@ -1367,12 +1343,12 @@ endif
 
 u-boot-nodtb.bin: u-boot FORCE
 	$(call if_changed,objcopy_uboot)
-	$(BOARD_SIZE_CHECK)
+	@ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT))
 
 u-boot.ldr:	u-boot
 		$(CREATE_LDR_ENV)
 		$(LDR) -T $(CONFIG_LDR_CPU) -c $@ $< $(LDR_FLAGS)
-		$(BOARD_SIZE_CHECK)
+		@ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT))
 
 # binman
 # ---------------------------------------------------------------------------
@@ -1498,7 +1474,7 @@ u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
 			$(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SANDBOX),dts/dt.dtb) \
 		,$(UBOOT_BIN)) FORCE
 	$(call if_changed,mkimage)
-	$(BOARD_SIZE_CHECK)
+	@ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT))
 
 ifeq ($(CONFIG_SPL_LOAD_FIT_FULL),y)
 MKIMAGEFLAGS_u-boot.itb =
@@ -1513,12 +1489,12 @@ u-boot.itb: u-boot-nodtb.bin \
 		$(if $(CONFIG_MULTI_DTB_FIT),$(FINAL_DTB_CONTAINER)) \
 		$(U_BOOT_ITS) FORCE
 	$(call if_changed,mkfitimage)
-	$(BOARD_SIZE_CHECK)
+	@ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT))
 endif
 
 u-boot-with-spl.kwb: u-boot.bin spl/u-boot-spl.bin FORCE
 	$(call if_changed,mkimage)
-	$(BOARD_SIZE_CHECK)
+	@ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT))
 
 u-boot.dis:	u-boot
 		$(OBJDUMP) -d $< > $@
@@ -1535,7 +1511,7 @@ OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
 				   --pad-to=$(CONFIG_SPL_PAD_TO)
 u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE
 	$(call if_changed,pad_cat)
-	$(SPL_SIZE_CHECK)
+	@$(call size_check,$@,$$(tools/spl_size_limit))
 
 ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy)
 MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
@@ -2108,7 +2084,7 @@ u-boot.lds: $(LDSCRIPT) prepare FORCE
 
 spl/u-boot-spl.bin: spl/u-boot-spl
 	@:
-	$(SPL_SIZE_CHECK)
+	@$(call size_check,$@,$$(tools/spl_size_limit))
 
 spl/u-boot-spl-dtb.bin: spl/u-boot-spl
 	@:
@@ -2133,14 +2109,14 @@ spl/boot.bin: spl/u-boot-spl
 
 tpl/u-boot-tpl.bin: tpl/u-boot-tpl
 	@:
-	$(TPL_SIZE_CHECK)
+	@$(call size_check,$@,$(CONFIG_TPL_SIZE_LIMIT))
 
 tpl/u-boot-tpl: tools prepare $(if $(CONFIG_TPL_OF_CONTROL),dts/dt.dtb)
 	$(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.xpl all
 
 vpl/u-boot-vpl.bin: vpl/u-boot-vpl
 	@:
-	$(VPL_SIZE_CHECK)
+	@$(call size_check,$@,$(CONFIG_VPL_SIZE_LIMIT))
 
 vpl/u-boot-vpl: tools prepare $(if $(CONFIG_TPL_OF_CONTROL),dts/dt.dtb)
 	$(Q)$(MAKE) obj=vpl -f $(srctree)/scripts/Makefile.xpl all
#7 lore raw

Re: [PATCH v4 1/3] Makefile: Add size check for u-boot-with-spl.bin

Quoted 37 lines · Philip Oberfichtner

Hi Tom,

Quoted 20 lines · Tom Rini
Quoted 9 lines · Philip Oberfichtner

Like other images, u-boot-with-spl.bin may be subject to size restrictions. Extend CONFIG_SPL_SIZE_LIMIT to handle this case.

---

Notes:
Changes in v4: none

Quoted 8 lines

Changes in v3:
Reuse existing SPL_SIZE_LIMIT instead of implementing a new option

Changes in v2: none

 Makefile           | 1 +
 common/spl/Kconfig | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)
Quoted 5 lines

This is not quite right enough, sorry. This causes a number of boards (evb-ast2600 ibm-sbp1 stm32746g-eval_spl stm32f746-disco_spl stm32f769-disco_spl) which have size checks and are fine to now fail their size checks, presumably because they're checking the "wrong" file now or similar.

Thanks for pointing that out. To sum it up: If those boards use SPL_SIZE_LIMIT to restrict the size of an SPL-only image, then u-boot-with-spl.bin, of course, can be too large and the build fails.

Plus in our previous discussion, we figured out why using BOARD_SIZE_LIMIT also isn't suitable:
https://lore.kernel.org/u-boot/aD2EflR9DRYG-MY5@antares/

Quoted 7 lines

So from here I really don't see any better way than introducing yet another CONFIG_*SIZE_LIMIT option.

But maybe we can however simplify and deduplicate some of the code. What do you think about something like that (I have not yet tested it, just a rough idea so far):

That sounds like a good idea, so long as it works :) Thanks!

Signature · 1 line
Tom
#8 lore raw

Re: [PATCH v4 1/3] Makefile: Add size check for u-boot-with-spl.bin

Quoted 42 lines · Tom Rini
Quoted 41 lines · Philip Oberfichtner

Hi Tom,

Quoted 20 lines · Tom Rini
Quoted 9 lines · Philip Oberfichtner

Like other images, u-boot-with-spl.bin may be subject to size restrictions. Extend CONFIG_SPL_SIZE_LIMIT to handle this case.

---

Notes:
Changes in v4: none

Quoted 8 lines

Changes in v3:
Reuse existing SPL_SIZE_LIMIT instead of implementing a new option

Changes in v2: none

 Makefile           | 1 +
 common/spl/Kconfig | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)
Quoted 5 lines

This is not quite right enough, sorry. This causes a number of boards (evb-ast2600 ibm-sbp1 stm32746g-eval_spl stm32f746-disco_spl stm32f769-disco_spl) which have size checks and are fine to now fail their size checks, presumably because they're checking the "wrong" file now or similar.

Thanks for pointing that out. To sum it up: If those boards use SPL_SIZE_LIMIT to restrict the size of an SPL-only image, then u-boot-with-spl.bin, of course, can be too large and the build fails.

Plus in our previous discussion, we figured out why using BOARD_SIZE_LIMIT also isn't suitable:
https://lore.kernel.org/u-boot/aD2EflR9DRYG-MY5@antares/

So from here I really don't see any better way than introducing yet another CONFIG_*SIZE_LIMIT option.

Quoted 6 lines
Quoted 3 lines

But maybe we can however simplify and deduplicate some of the code. What do you think about something like that (I have not yet tested it, just a rough idea so far):

That sounds like a good idea, so long as it works :) Thanks!

So I've tested it for multiple board/image combinations. Should be fine now. v5 is on the way.

Best regards,
Philip

Quoted 2 lines
Signature · 1 line
Tom
Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,
Managing Director: Johanna Denk, Tabea Lutz
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
=====================================================================
#9 lore raw

PATCH v4 2/3 mips: serial: Silence "unused variable" warning

In reply to Philip Oberfichtner

Before this commit, mtmips_spl_serial_init() caused the following warning:

  arch/mips/mach-mtmips/mt7628/serial.c:14:23: warning: unused variable ‘base’ [-Wunused-variable]
     14 |         void __iomem *base = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE);
        |                       ^~~~

This happens whenever CONFIG_SPECIFY_CONSOLE_INDEX is unset, which leads to an effectively empty function:

void mtmips_spl_serial_init(void)

  {
	  void __iomem *base = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE);

}

Add the __maybe_unused attribute to silence this warning.

---

Notes:
Changes in v4: new

 arch/mips/mach-mtmips/mt7620/serial.c     | 2 +-
 arch/mips/mach-mtmips/mt7621/spl/serial.c | 2 +-
 arch/mips/mach-mtmips/mt7628/serial.c     | 2 +-
 3 files changed, 3 insertions(+), 3 deletions(-)
arch/mips/mach-mtmips/mt7620/serial.c +1 -1
index 35544b8537e..a6915865e27 100644
@@ -24,7 +24,7 @@ void board_debug_uart_init(void)
 void mtmips_spl_serial_init(void)
 {
 #ifdef CONFIG_SPL_SERIAL
-	void __iomem *base = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE);
+	void __iomem __maybe_unused *base = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE);
 
 #if CONFIG_CONS_INDEX == 1
 	clrbits_32(base + SYSCTL_GPIOMODE_REG, UARTL_GPIO_MODE);
arch/mips/mach-mtmips/mt7621/spl/serial.c +1 -1
index 5cf093a078a..3f600d778e7 100644
@@ -11,7 +11,7 @@
 void mtmips_spl_serial_init(void)
 {
 #ifdef CONFIG_SPL_SERIAL
-	void __iomem *base = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE);
+	void __iomem __maybe_unused *base = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE);
 
 #if CONFIG_CONS_INDEX == 1
 	clrbits_32(base + SYSCTL_GPIOMODE_REG, UART1_MODE);
arch/mips/mach-mtmips/mt7628/serial.c +1 -1
index 11a2149e127..88d63f3825b 100644
@@ -11,7 +11,7 @@
 void mtmips_spl_serial_init(void)
 {
 #ifdef CONFIG_SPL_SERIAL
-	void __iomem *base = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE);
+	void __iomem __maybe_unused *base = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE);
 
 #if CONFIG_CONS_INDEX == 1
 	clrbits_32(base + SYSCTL_GPIO_MODE1_REG, UART0_MODE_M);
Signature · 1 line
2.39.5
#10 lore raw

PATCH v4 3/3 mips: mt7628: Add Onion Omega2/2+ board support

In reply to Philip Oberfichtner

The Omega2 / Omega2+ are based on the MediaTek MT7688 SoC with the following features:
- 64 / 128MB of DDR2 memory
- 16 / 32MB of SPI NOR flash
- USB, WiFi and many more peripherals

---

Notes:
Changes in v4:
- Adapt bootcmd
- Rebase defconfig

Changes in v3:
- Adapt defconfig to [PATCH 1/2] (SPL_SIZE_LIMIT)

Changes in v2:
- Fix style issues as reported by checkpatch
- Add MAINTAINERS file

 arch/mips/dts/Makefile               |   1 +
 arch/mips/dts/onion-omega2p.dts      |  58 ++++++++++++
 arch/mips/mach-mtmips/mt7628/Kconfig |   7 ++
 board/onion/omega2p/Kconfig          |  12 +++
 board/onion/omega2p/MAINTAINERS      |  10 ++
 board/onion/omega2p/Makefile         |   3 +
 board/onion/omega2p/board.c          | 134 +++++++++++++++++++++++++++
 board/onion/omega2p/omega2p.env      |  32 +++++++
 configs/onion-omega2p_defconfig      |  82 ++++++++++++++++
 include/configs/onion-omega2p.h      |  15 +++
 10 files changed, 354 insertions(+)
 create mode 100644 arch/mips/dts/onion-omega2p.dts
 create mode 100644 board/onion/omega2p/Kconfig
 create mode 100644 board/onion/omega2p/MAINTAINERS
 create mode 100644 board/onion/omega2p/Makefile
 create mode 100644 board/onion/omega2p/board.c
 create mode 100644 board/onion/omega2p/omega2p.env
 create mode 100644 configs/onion-omega2p_defconfig
 create mode 100644 include/configs/onion-omega2p.h
arch/mips/dts/Makefile +1 -0
index 7c4ee8b668b..cb33f96edee 100644
@@ -21,6 +21,7 @@ dtb-$(CONFIG_BOARD_MT7621_NAND_RFB) += mediatek,mt7621-nand-rfb.dtb
 dtb-$(CONFIG_BOARD_MT7628_RFB) += mediatek,mt7628-rfb.dtb
 dtb-$(CONFIG_BOARD_GARDENA_SMART_GATEWAY_MT7688) += gardena-smart-gateway-mt7688.dtb
 dtb-$(CONFIG_BOARD_LINKIT_SMART_7688) += linkit-smart-7688.dtb
+dtb-$(CONFIG_BOARD_ONION_OMEGA2) += onion-omega2p.dtb
 dtb-$(CONFIG_TARGET_OCTEON_EBB7304) += mrvl,octeon-ebb7304.dtb
 dtb-$(CONFIG_TARGET_OCTEON_NIC23) += mrvl,octeon-nic23.dtb
 dtb-$(CONFIG_BOARD_NETGEAR_CG3100D) += netgear,cg3100d.dtb
arch/mips/dts/onion-omega2p.dts new file +58 -0

58 lines not on this page · raw message

arch/mips/mach-mtmips/mt7628/Kconfig +7 -0
index 79b2ddc6692..a75196eaefd 100644
@@ -27,6 +27,12 @@ config BOARD_MT7628_RFB
 	  SPI-NOR flash, 1 built-in switch with 5 ports, 1 UART, 1 USB host,
 	  1 SDXC, 1 PCIe socket and JTAG pins.
 
+config BOARD_ONION_OMEGA2
+	bool "Onion Omega2/2+"
+	help
+	  Onion Omega2/2+ IoT computer. Has a MT7688 SoC with 64/128 MiB of DDR2
+	  RAM and 16/32 MiB of SPI flash.
+
 config BOARD_VOCORE2
 	bool "VoCore2"
 	select SPL_SERIAL
@@ -52,6 +58,7 @@ config SYS_CONFIG_NAME
 	default "mt7628" if BOARD_MT7628_RFB
 
 source "board/gardena/smart-gateway-mt7688/Kconfig"
+source "board/onion/omega2p/Kconfig"
 source "board/seeed/linkit-smart-7688/Kconfig"
 source "board/vocore/vocore2/Kconfig"
 
board/onion/omega2p/Kconfig new file +12 -0
new file mode 100644
index 00000000000..45c18ee27ef
@@ -0,0 +1,12 @@
+if BOARD_ONION_OMEGA2
+
+config SYS_BOARD
+	default "omega2p"
+
+config SYS_VENDOR
+	default "onion"
+
+config SYS_CONFIG_NAME
+	default "onion-omega2p"
+
+endif
board/onion/omega2p/MAINTAINERS new file +10 -0
new file mode 100644
index 00000000000..4532c1c6d3e
@@ -0,0 +1,10 @@
+ONION OMEGA2/2+
+M:	Philip Oberfichtner <[email protected]>
+S:	Maintained
+F:	arch/mips/dts/onion-omega2p.dts
+F:	board/onion/omega2p/Kconfig
+F:	board/onion/omega2p/Makefile
+F:	board/onion/omega2p/board.c
+F:	board/onion/omega2p/omega2p.env
+F:	configs/onion-omega2p_defconfig
+F:	include/configs/onion-omega2p.h
board/onion/omega2p/Makefile new file +3 -0
new file mode 100644
index 00000000000..70cd7a8e568
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0+
+
+obj-y += board.o
board/onion/omega2p/board.c new file +134 -0

134 lines not on this page · raw message

board/onion/omega2p/omega2p.env new file +32 -0
new file mode 100644
index 00000000000..f8c10b584e2
@@ -0,0 +1,32 @@
+# SPDX-License-Identifier: GPL-2.0+
+# Copyright (C) 2025 DENX Software Engineering GmbH, Philip Oberfichtner <[email protected]>
+
+# Boot options
+bootargs=console=ttyS0,115200 rootfstype=squashfs,jffs2
+bootfile=firmware.bin
+boot_linux=sf probe && mtd read firmware 81800000 0 400000 && bootm 81800000
+
+# unset temporary variable and make the environment persist if necessary.
+env_check= \
+	env set reset_pressed; \
+	if env info -p -d -q; then \
+		echo "No valid environment found on flash. Write out the defaults."; \
+		env save; \
+	fi
+
+bootcmd= \
+	if test -z "${reset_pressed}"; then \
+		run env_check; \
+		run boot_linux; \
+	else \
+		run env_check; \
+	fi
+
+# Network configuration
+serverip=192.168.8.100
+ipaddr=192.168.8.8
+loadaddr=0x81800000
+
+# MTD settings
+mtdids=nor0=spi0.0
+# mtdparts will be set at runtime, according to the specific board variant.
configs/onion-omega2p_defconfig new file +82 -0

82 lines not on this page · raw message

include/configs/onion-omega2p.h new file +15 -0
new file mode 100644
index 00000000000..ca170b22a40
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2024 Zheng Han <[email protected]>, Lazar Demin <[email protected]>
+ */
+#ifndef __CONFIG_ONION_OMEGA2P_H
+#define __CONFIG_ONION_OMEGA2P_H
+
+/* RAM */
+#define CFG_SYS_SDRAM_BASE      0x80000000
+#define CFG_SYS_INIT_SP_OFFSET  0x400000
+
+/* Dummy value */
+#define CFG_SYS_UBOOT_BASE      0
+
+#endif /* __CONFIG_ONION_OMEGA2P_H */
Signature · 1 line
2.39.5
#11 lore raw
In reply to Philip Oberfichtner

Hi all,

It's been a while since my first submission of this patch set (end of May). I'd hope we could still get it in within the current merge window?

Best regards,
Philip

Quoted 46 lines · Philip Oberfichtner

Add support for the MediaTek based boards by Onion. Commit one and two are rather generic, whereas the third commit adds the actual board support.

Changes in v4:
- Rebase board support to v2025.07
- Add new commit to silence warning in arch/mips/

Changes in v3:
- Simplify image size check

Changes in v2:
- I forgot to run checkpatch in v1. Fix some style issues in v2.

Philip Oberfichtner (3):
Makefile: Add size check for u-boot-with-spl.bin
mips: serial: Silence "unused variable" warning
mips: mt7628: Add Onion Omega2/2+ board support

 Makefile                                  |   1 +
 arch/mips/dts/Makefile                    |   1 +
 arch/mips/dts/onion-omega2p.dts           |  58 ++++++++++
 arch/mips/mach-mtmips/mt7620/serial.c     |   2 +-
 arch/mips/mach-mtmips/mt7621/spl/serial.c |   2 +-
 arch/mips/mach-mtmips/mt7628/Kconfig      |   7 ++
 arch/mips/mach-mtmips/mt7628/serial.c     |   2 +-
 board/onion/omega2p/Kconfig               |  12 ++
 board/onion/omega2p/MAINTAINERS           |  10 ++
 board/onion/omega2p/Makefile              |   3 +
 board/onion/omega2p/board.c               | 134 ++++++++++++++++++++++
 board/onion/omega2p/omega2p.env           |  32 ++++++
 common/spl/Kconfig                        |   2 +-
 configs/onion-omega2p_defconfig           |  82 +++++++++++++
 include/configs/onion-omega2p.h           |  15 +++
 15 files changed, 359 insertions(+), 4 deletions(-)
 create mode 100644 arch/mips/dts/onion-omega2p.dts
 create mode 100644 board/onion/omega2p/Kconfig
 create mode 100644 board/onion/omega2p/MAINTAINERS
 create mode 100644 board/onion/omega2p/Makefile
 create mode 100644 board/onion/omega2p/board.c
 create mode 100644 board/onion/omega2p/omega2p.env
 create mode 100644 configs/onion-omega2p_defconfig
 create mode 100644 include/configs/onion-omega2p.h
Signature · 1 line
2.39.5
Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,
Managing Director: Johanna Denk, Tabea Lutz
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
=====================================================================