MAINTAINERS: remove bouncing address for Nandor Han
PATCH 1/1 MAINTAINERS: remove bouncing address for Nandor Han
From: Bartosz Golaszewski <[email protected]>
Nandor's address has been bouncing for some time now. Remove it from MAINTAINERS.
--- MAINTAINERS | 7 ------- 1 file changed, 7 deletions(-)
MAINTAINERS +0 -7
@@ -27466,13 +27466,6 @@ S: Supported W: http://www.marvell.com F: drivers/i2c/busses/i2c-xlp9xx.c -XRA1403 GPIO EXPANDER -M: Nandor Han <[email protected]> -L: [email protected] -S: Maintained -F: Documentation/devicetree/bindings/gpio/gpio-xra1403.txt -F: drivers/gpio/gpio-xra1403.c - XTENSA XTFPGA PLATFORM SUPPORT M: Max Filippov <[email protected]> S: Maintained
Signature · 1 line
2.48.1
MAINTAINERS S: Supported · line 27474
Quoted 6 lines · Bartosz Golaszewski
MAINTAINERS +0
-6-XRA1403 GPIO EXPANDER -M: Nandor Han <[email protected]> -L: [email protected] -S: Maintained -F: Documentation/devicetree/bindings/gpio/gpio-xra1403.txt -F: drivers/gpio/gpio-xra1403.c
Shouldn't the driver status be orphaned?
Thanks.
Signature · 1 line
An old man doll... just what I always wanted! - Clara
Quoted 11 lines · Bagas Sanjaya
MAINTAINERS S: Supported · line 27474
Quoted 6 lines · Bartosz Golaszewski
MAINTAINERS +0
-6-XRA1403 GPIO EXPANDER -M: Nandor Han <[email protected]> -L: [email protected] -S: Maintained -F: Documentation/devicetree/bindings/gpio/gpio-xra1403.txt -F: drivers/gpio/gpio-xra1403.cShouldn't the driver status be orphaned?
It falls under the higher-level GPIO subsystem umbrella.
Bartosz
Quoted 5 lines · Bartosz Golaszewski
Quoted 2 lines · Bagas Sanjaya
Shouldn't the driver status be orphaned?
It falls under the higher-level GPIO subsystem umbrella.
OK, thanks!
Signature · 1 line
An old man doll... just what I always wanted! - Clara
Bartosz Golaszewski
AppliedFrom: Bartosz Golaszewski <[email protected]>
Quoted 4 lines · Bartosz Golaszewski
Nandor's address has been bouncing for some time now. Remove it from
MAINTAINERS.
Applied, thanks!
[1/1] MAINTAINERS: remove bouncing address for Nandor Han
https://git.kernel.org/brgl/linux/c/edb471108cf1477c44b95e87e8cec261825eb079
Best regards,
Signature · 1 line
Bartosz Golaszewski <[email protected]>
Hi,
Quoted 4 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
Nandor's address has been bouncing for some time now. Remove it from
MAINTAINERS.
+Cc: Ian Ray, just in case somebody from GEHC wants to be notified for this.
Greetings,
-- Sebastian
Quoted 27 lines
Signed-off-by Bartosz Golaszewski <[email protected]>--- MAINTAINERS | 7 ------- 1 file changed, 7 deletions(-)MAINTAINERS +0
-7@@ -27466,13 +27466,6 @@ S: Supported W: http://www.marvell.com F: drivers/i2c/busses/i2c-xlp9xx.c -XRA1403 GPIO EXPANDER -M: Nandor Han <[email protected]> -L: [email protected] -S: Maintained -F: Documentation/devicetree/bindings/gpio/gpio-xra1403.txt -F: drivers/gpio/gpio-xra1403.c - XTENSA XTFPGA PLATFORM SUPPORT M: Max Filippov <[email protected]> S: MaintainedSignature · 1 line
2.48.1
Hi,
Quoted 8 lines · Sebastian Reichel
Quoted 4 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
Nandor's address has been bouncing for some time now. Remove it from
MAINTAINERS.+Cc: Ian Ray, just in case somebody from GEHC wants to be notified for this.
Apparently his entry in MAINTAINERS is also wrong and it needs to be @gehealthcare.com now (at least that is what U-Boot switched to [0]). Let's try again :)
Ian, you should update your linux MAINTAINERS entry in MEGACHIPS STDPXXXX-GE-B850V3-FW LVDS/DP++ BRIDGES [1].
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/MAINTAINERS#n15490
[0] https://lore.kernel.org/all/[email protected]/
Greetings,
-- Sebastian
Quoted 32 lines
Greetings,
-- Sebastian
Quoted 27 lines
Signed-off-by Bartosz Golaszewski <[email protected]>--- MAINTAINERS | 7 ------- 1 file changed, 7 deletions(-)MAINTAINERS +0
-7@@ -27466,13 +27466,6 @@ S: Supported W: http://www.marvell.com F: drivers/i2c/busses/i2c-xlp9xx.c -XRA1403 GPIO EXPANDER -M: Nandor Han <[email protected]> -L: [email protected] -S: Maintained -F: Documentation/devicetree/bindings/gpio/gpio-xra1403.txt -F: drivers/gpio/gpio-xra1403.c - XTENSA XTFPGA PLATFORM SUPPORT M: Max Filippov <[email protected]> S: MaintainedSignature · 1 line
2.48.1
Quoted 16 lines · Sebastian Reichel
Hi,
Quoted 8 lines · Sebastian Reichel
Quoted 4 lines · Bartosz Golaszewski
From: Bartosz Golaszewski <[email protected]>
Nandor's address has been bouncing for some time now. Remove it from
MAINTAINERS.+Cc: Ian Ray, just in case somebody from GEHC wants to be notified for this.
Apparently his entry in
MAINTAINERSis also wrong and it needs to be @gehealthcare.com now (at least that is what U-Boot switched to [0]). Let's try again :)
Quoted 6 lines
Ian, you should update your linux
MAINTAINERSentry in MEGACHIPS STDPXXXX-GE-B850V3-FW LVDS/DP++ BRIDGES [1].[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/MAINTAINERS#n15490
[0] https://lore.kernel.org/all/[email protected]/
Hi Sebastian your link [0] is actually a LKML submission (December 2024).
I also sent a V2 [2] (April 2025), but there has been no feedback.
[2] https://lore.kernel.org/all/[email protected]/
Blue skies,
Ian
Quoted 36 lines
Greetings,
-- Sebastian
Quoted 32 lines
Greetings,
-- Sebastian
Quoted 27 lines
Signed-off-by Bartosz Golaszewski <[email protected]>--- MAINTAINERS | 7 ------- 1 file changed, 7 deletions(-)MAINTAINERS +0
-8@@ -27466,13 +27466,6 @@ S: Supported W: http://www.marvell.com/ F: drivers/i2c/busses/i2c-xlp9xx.c -XRA1403 GPIO EXPANDER -M: Nandor Han <[email protected]> -L: [email protected] -S: Maintained -F: Documentation/devicetree/bindings/gpio/gpio-xra1403.txt -F: drivers/gpio/gpio-xra1403.c - XTENSA XTFPGA PLATFORM SUPPORT M: Max Filippov <[email protected]> S: Maintained --2.48.1