Skip to contentSkip to conversation

guestfs: add scsi extra storage option

PATCH In review Luis Chamberlain 3 participants 9 messages Jul 10, 2025 – Jul 18, 2025

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 guestfs: add scsi extra storage option

From: Luis Chamberlain <[email protected]>

Add scsi device support for virtualization.

Generated-by ChatGPT Codex
---
 defconfigs/blktests_scsi                      |  2 +-
 kconfigs/Kconfig.libvirt                      | 25 ++++++++++++-------
 playbooks/roles/gen_nodes/defaults/main.yml   |  1 +
 .../roles/gen_nodes/templates/Vagrantfile.j2  | 11 ++++++--
 playbooks/roles/gen_nodes/templates/drives.j2 | 24 ++++++++++++++++--
 .../roles/gen_nodes/templates/gen_drives.j2   | 21 ++++++++++------
 .../kdevops_nodes_split_start.j2.yaml         | 10 ++++++++
 workflows/steady_state/Kconfig                |  1 +
 8 files changed, 74 insertions(+), 21 deletions(-)
defconfigs/blktests_scsi +1 -1
index d49e72893690..28462939e11e 100644
@@ -9,7 +9,7 @@ CONFIG_GUESTFS_BRINGUP_DEBUG_1=y
 CONFIG_BOOTLINUX=y
 CONFIG_BOOTLINUX_9P=y
 
-CONFIG_LIBVIRT_EXTRA_STORAGE_DRIVE_NVME=y
+CONFIG_LIBVIRT_EXTRA_STORAGE_DRIVE_SCSI=y
 
 CONFIG_WORKFLOWS_TESTS=y
 CONFIG_WORKFLOWS_LINUX_TESTS=y
kconfigs/Kconfig.libvirt +16 -9
index 8654eb9b1a06..f737b79faea4 100644
@@ -487,7 +487,7 @@ config LIBVIRT_MACHINE_TYPE_DEFAULT
 	  is the old i440x, so you will not get PCIe support.
 
 	  We only want to support PCI-E capable guests with libguest so the
-	  deafult is not allowed on libguest.
+	  default is not allowed on libguest.
 
 config LIBVIRT_MACHINE_TYPE_Q35
 	bool "q35"
@@ -548,11 +548,18 @@ config LIBVIRT_EXTRA_STORAGE_DRIVE_VIRTIO
 	  you won't be able to test ZNS.
 
 config LIBVIRT_EXTRA_STORAGE_DRIVE_IDE
-	bool "ide"
-	output yaml
-	help
-	  Use the QEMU ide driver for extra storage drives. This is useful for
-	  really old Linux distributions that lack the virtio backend driver.
+        bool "ide"
+        output yaml
+        help
+          Use the QEMU ide driver for extra storage drives. This is useful for
+          really old Linux distributions that lack the virtio backend driver.
+
+config LIBVIRT_EXTRA_STORAGE_DRIVE_SCSI
+        bool "scsi"
+        output yaml
+        help
+          Use the QEMU SCSI driver for extra storage drives. This relies on a
+          virtio-scsi controller with scsi-hd devices attached.
 
 endchoice
 
@@ -817,7 +824,7 @@ config LIBVIRT_AIO_MODE_NATIVE
 	help
 	  Use the aio=native mode. For some older kernels it is known that
 	  native will cause corruption if used on ext4 or xfs filesystem if
-	  you also use cace=none. This corruption is documented for RHEL:
+	  you also use cache=none. This corruption is documented for RHEL:
 
 	  https://access.redhat.com/articles/41313
 	  https://bugzilla.redhat.com/show_bug.cgi?id=615309
@@ -1104,7 +1111,7 @@ config LIBVIRT_ENABLE_GDB
 	output yaml
 	help
 	  Select this option if you want to enable debugging support for GDB.
-	  By default , it is assumed that gdb is disabled since we dont want
+	  By default , it is assumed that gdb is disabled since we don't want
 	  to complicate this for the CI runs. If enabled then libvirt guest
 	  xml for each guest will be configured to use gdb on a specific
 	  tcp port.
@@ -1116,7 +1123,7 @@ config LIBVIRT_GDB_BASEPORT
 	depends on LIBVIRT_ENABLE_GDB
 	help
 	  This option defines the base port to be used for the GDB.
-	  Esentially we need to make QEMU listen for an incoming connection from
+	  Essentially we need to make QEMU listen for an incoming connection from
 	  gdb on a TCP port. The default port is chosen to be 1234. However we
 	  introduce variability for assigning the port to each guest by defining
 	  a base port and adding an index to it based on the number of libvrt guest
playbooks/roles/gen_nodes/defaults/main.yml +1 -0
index 6a899be45128..2cf450b84281 100644
@@ -70,6 +70,7 @@ libvirt_extra_drive_id_prefix: 'drv'
 libvirt_extra_storage_drive_nvme: False
 libvirt_extra_storage_drive_virtio: False
 libvirt_extra_storage_drive_ide: False
+libvirt_extra_storage_drive_scsi: False
 libvirt_extra_storage_aio_mode: "native"
 libvirt_extra_storage_aio_cache_mode: "none"
 # Note that NVMe on qemu does not allow the physical block size
playbooks/roles/gen_nodes/templates/Vagrantfile.j2 +9 -2
index 2298c3455251..a52f5566280e 100644
@@ -244,7 +244,7 @@ Vagrant.configure("2") do |config|
         #
         # Just create a PCI or PCI-E root bus dedicated for extra drives. We
         # use 0x08 to place this PCI / PCI-E root bus as we know this is
-        # avilable on modern x86-64 systems. Eventually we may need to bump
+        # available on modern x86-64 systems. Eventually we may need to bump
         # this to 0x9, but it would be better instead to have vagant-libvirt
         # speak "add a new PCI or PCI-E root bus" and "add extra drives" whether
         # that is nvme or virtio.
@@ -252,7 +252,7 @@ Vagrant.configure("2") do |config|
 {% if not libvirt_override_machine_type %}
         # For i440x on x86_64 (default on libvirt as of today) we use PCI, not
         # PCI-E. Below assumes i440x. i440x cannot support CXL as it does not
-        # suport PCI-E.
+        # support PCI-E.
         libvirt.qemuargs :value => "-device"
         libvirt.qemuargs :value => "pci-bridge,id=custom-pci-for-{{ extra_disk_driver }},chassis_nr=1,bus=pci.0,addr=0x8"
 {% else %}
@@ -417,6 +417,13 @@ Vagrant.configure("2") do |config|
             libvirt.qemuargs :value => "file=#{extra_disk},format={{ libvirt_extra_drive_format }},if=none,aio={{ libvirt_extra_storage_aio_mode }},cache={{ libvirt_extra_storage_aio_cache_mode }},id=#{disk_id}"
             libvirt.qemuargs :value => "-device"
             libvirt.qemuargs :value => "virtio-blk-pci,drive=#{disk_id},id=virtio-#{disk_id},serial=#{serial_id},bus=#{bus_for_extra_drives},addr=#{pci_function},iothread=kdevops-virtio-iothread-#{port}#{extra_drive_largio_args},logical_block_size=#{virtio_lbs},physical_block_size=#{virtio_pbs}"
+{% elif libvirt_extra_storage_drive_scsi %}
+            libvirt.qemuargs :value => "-device"
+            libvirt.qemuargs :value => "virtio-scsi-pci,id=scsi#{port},bus=#{bus_for_extra_drives},addr=#{pci_function}"
+            libvirt.qemuargs :value => "-drive"
+            libvirt.qemuargs :value => "file=#{extra_disk},format={{ libvirt_extra_drive_format }},if=none,aio={{ libvirt_extra_storage_aio_mode }},cache={{ libvirt_extra_storage_aio_cache_mode }},id=#{disk_id}"
+            libvirt.qemuargs :value => "-device"
+            libvirt.qemuargs :value => "scsi-hd,drive=#{disk_id},bus=scsi#{port}.0"
 {% elif libvirt_extra_storage_drive_nvme  %}
             if ! largio
               nvme_lbs = "{{ libvirt_extra_storage_nvme_logical_block_size }}"
playbooks/roles/gen_nodes/templates/drives.j2 +22 -2
index 8327cd430981..1241b88a9379 100644
@@ -40,6 +40,26 @@ the drives can vary by type, so we have one macro by type of drive.
 {% endfor %}
 <!-- End of virtio drives-->
 {%- endmacro -%}
+{%- macro gen_drive_scsi(num_drives,
+                         kdevops_storage_pool_path,
+                         hostname,
+                         libvirt_extra_drive_format,
+                         libvirt_extra_storage_aio_mode,
+                         libvirt_extra_storage_aio_cache_mode) -%}
+<!-- We generated {{ num_drives }} scsi dives -->
+{% for n in range(0,num_drives) %}
+    <!-- This is scsi drive # {{ n + 1 }} -->
+    <qemu:arg value='-device'/>
+    <qemu:arg value='pcie-root-port,id=pcie-port-for-scsi-{{ n }},multifunction=on,bus=pcie.1,addr=0x{{ "%0x" | format( n | int) }},chassis=5{{ n }}'/>
+    <qemu:arg value='-device'/>
+    <qemu:arg value='virtio-scsi-pci,id=scsi{{ n }},bus=pcie-port-for-scsi-{{ n }},addr=0x0'/>
+    <qemu:arg value='-drive'/>
+    <qemu:arg value='file={{ kdevops_storage_pool_path }}/guestfs/{{ hostname }}/extra{{ n }}.{{ libvirt_extra_drive_format }},format={{ libvirt_extra_drive_format }},if=none,aio={{ libvirt_extra_storage_aio_mode }},cache={{ libvirt_extra_storage_aio_cache_mode }},id=drv{{ n }}'/>
+    <qemu:arg value='-device'/>
+    <qemu:arg value='scsi-hd,drive=drv{{ n }},bus=scsi{{ n }}.0'/>
+{% endfor %}
+<!-- End of scsi drives-->
+{%- endmacro -%}
 {%- macro gen_drive_large_io_virtio(libvirt_largeio_logical_compat,
 				    libvirt_largeio_logical_compat_size,
 				    libvirt_largeio_pow_limit,
@@ -49,7 +69,7 @@ the drives can vary by type, so we have one macro by type of drive.
 				    libvirt_extra_storage_aio_mode,
 				    libvirt_extra_storage_aio_cache_mode,
 				    kdevops_storage_pool_path) -%}
-<!-- These are virtio drives used for large IO experimentaiton, with LBS support -->
+<!-- These are virtio drives used for large IO experimentation, with LBS support -->
 {% set ns = namespace(lbs_idx=0)  %}
 {% set max_pbs = libvirt_largeio_logical_compat_size  * (2 ** libvirt_largeio_pow_limit) %}
 {% for n in range(0,libvirt_largeio_pow_limit+1) %}
@@ -106,7 +126,7 @@ the drives can vary by type, so we have one macro by type of drive.
 				  libvirt_extra_storage_aio_mode,
 				  libvirt_extra_storage_aio_cache_mode,
 				  kdevops_storage_pool_path) -%}
-<!-- These are NVMe drives used for large IO experimentaiton, with LBS support -->
+<!-- These are NVMe drives used for large IO experimentation, with LBS support -->
 {% set ns = namespace(lbs_idx=0)  %}
 {% set max_pbs = libvirt_largeio_logical_compat_size  * (2 ** libvirt_largeio_pow_limit) %}
 {% for n in range(0,libvirt_largeio_pow_limit+1) %}
playbooks/roles/gen_nodes/templates/gen_drives.j2 +14 -7
index 874e5b0623b9..2de13da4ab8e 100644
@@ -19,14 +19,21 @@
 				    kdevops_storage_pool_path) }}
 {% else %}
 {{ drives.gen_drive_virtio(4,
-			   kdevops_storage_pool_path,
-			   hostname,
-			   libvirt_extra_drive_format,
-			   libvirt_extra_storage_aio_mode,
-			   libvirt_extra_storage_aio_cache_mode,
-			   libvirt_extra_storage_virtio_logical_block_size,
-			   libvirt_extra_storage_virtio_physical_block_size) }}
+                           kdevops_storage_pool_path,
+                           hostname,
+                           libvirt_extra_drive_format,
+                           libvirt_extra_storage_aio_mode,
+                           libvirt_extra_storage_aio_cache_mode,
+                           libvirt_extra_storage_virtio_logical_block_size,
+                           libvirt_extra_storage_virtio_physical_block_size) }}
 {% endif %}
+{% elif libvirt_extra_storage_drive_scsi %}
+{{ drives.gen_drive_scsi(4,
+                         kdevops_storage_pool_path,
+                         hostname,
+                         libvirt_extra_drive_format,
+                         libvirt_extra_storage_aio_mode,
+                         libvirt_extra_storage_aio_cache_mode) }}
 {% elif libvirt_extra_storage_drive_nvme  %}
 {% if libvirt_largeio_enable %}
 {{ drives.gen_drive_large_io_nvme(libvirt_largeio_logical_compat,
playbooks/roles/gen_nodes/templates/kdevops_nodes_split_start.j2.yaml +10 -0
index e5b88efefc63..91e105cd3bff 100644
@@ -76,6 +76,16 @@ vagrant_global:
       physical_block_size: {{ libvirt_extra_storage_virtio_physical_block_size }}
       logical_block_size: {{ libvirt_extra_storage_virtio_logical_block_size }}
 {% endif %}
+{% elif libvirt_extra_storage_drive_scsi %}
+  extra_disks:
+    data:
+      size: 102400
+    scratch:
+      size: 102400
+    extra1:
+      size: 102400
+    extra2:
+      size: 102400
 {% elif libvirt_extra_storage_drive_nvme %}
   extra_disks:
     data:
workflows/steady_state/Kconfig +1 -0
index 335b833cfbcc..f7064d078c0a 100644
@@ -6,6 +6,7 @@ config SSD_STEADY_STATE_DEVICE
     default "/dev/disk/by-id/nvme-QEMU_NVMe_Ctrl_kdevops1" if LIBVIRT && LIBVIRT_EXTRA_STORAGE_DRIVE_NVME
     default "/dev/disk/by-id/virtio-kdevops1" if LIBVIRT && LIBVIRT_EXTRA_STORAGE_DRIVE_VIRTIO
     default "/dev/disk/by-id/ata-QEMU_HARDDISK_kdevops1" if LIBVIRT && LIBVIRT_EXTRA_STORAGE_DRIVE_IDE
+    default "/dev/sdc" if LIBVIRT && LIBVIRT_EXTRA_STORAGE_DRIVE_SCSI
     default "/dev/nvme2n1" if TERRAFORM_AWS_INSTANCE_M5AD_4XLARGE
     default "/dev/nvme1n1" if TERRAFORM_GCE
     default "/dev/sdd" if TERRAFORM_AZURE
Signature · 1 line
2.45.2
#1 lore raw
Quoted 250 lines · Luis Chamberlain

From: Luis Chamberlain <[email protected]>

Add scsi device support for virtualization.

Generated-by ChatGPT Codex
---
 defconfigs/blktests_scsi                      |  2 +-
 kconfigs/Kconfig.libvirt                      | 25 ++++++++++++-------
 playbooks/roles/gen_nodes/defaults/main.yml   |  1 +
 .../roles/gen_nodes/templates/Vagrantfile.j2  | 11 ++++++--
 playbooks/roles/gen_nodes/templates/drives.j2 | 24 ++++++++++++++++--
 .../roles/gen_nodes/templates/gen_drives.j2   | 21 ++++++++++------
 .../kdevops_nodes_split_start.j2.yaml         | 10 ++++++++
 workflows/steady_state/Kconfig                |  1 +
 8 files changed, 74 insertions(+), 21 deletions(-)
defconfigs/blktests_scsi +1 -1
index d49e72893690..28462939e11e 100644
@@ -9,7 +9,7 @@ CONFIG_GUESTFS_BRINGUP_DEBUG_1=y
 CONFIG_BOOTLINUX=y
 CONFIG_BOOTLINUX_9P=y
 
-CONFIG_LIBVIRT_EXTRA_STORAGE_DRIVE_NVME=y
+CONFIG_LIBVIRT_EXTRA_STORAGE_DRIVE_SCSI=y
 
 CONFIG_WORKFLOWS_TESTS=y
 CONFIG_WORKFLOWS_LINUX_TESTS=y
kconfigs/Kconfig.libvirt +16 -9
index 8654eb9b1a06..f737b79faea4 100644
@@ -487,7 +487,7 @@ config LIBVIRT_MACHINE_TYPE_DEFAULT
 	  is the old i440x, so you will not get PCIe support.
 
 	  We only want to support PCI-E capable guests with libguest so the
-	  deafult is not allowed on libguest.
+	  default is not allowed on libguest.
 
 config LIBVIRT_MACHINE_TYPE_Q35
 	bool "q35"
@@ -548,11 +548,18 @@ config LIBVIRT_EXTRA_STORAGE_DRIVE_VIRTIO
 	  you won't be able to test ZNS.
 
 config LIBVIRT_EXTRA_STORAGE_DRIVE_IDE
-	bool "ide"
-	output yaml
-	help
-	  Use the QEMU ide driver for extra storage drives. This is useful for
-	  really old Linux distributions that lack the virtio backend driver.
+        bool "ide"
+        output yaml
+        help
+          Use the QEMU ide driver for extra storage drives. This is useful for
+          really old Linux distributions that lack the virtio backend driver.
+
+config LIBVIRT_EXTRA_STORAGE_DRIVE_SCSI
+        bool "scsi"
+        output yaml
+        help
+          Use the QEMU SCSI driver for extra storage drives. This relies on a
+          virtio-scsi controller with scsi-hd devices attached.
 
 endchoice
 
@@ -817,7 +824,7 @@ config LIBVIRT_AIO_MODE_NATIVE
 	help
 	  Use the aio=native mode. For some older kernels it is known that
 	  native will cause corruption if used on ext4 or xfs filesystem if
-	  you also use cace=none. This corruption is documented for RHEL:
+	  you also use cache=none. This corruption is documented for RHEL:
 
 	  https://access.redhat.com/articles/41313
 	  https://bugzilla.redhat.com/show_bug.cgi?id=615309
@@ -1104,7 +1111,7 @@ config LIBVIRT_ENABLE_GDB
 	output yaml
 	help
 	  Select this option if you want to enable debugging support for GDB.
-	  By default , it is assumed that gdb is disabled since we dont want
+	  By default , it is assumed that gdb is disabled since we don't want
 	  to complicate this for the CI runs. If enabled then libvirt guest
 	  xml for each guest will be configured to use gdb on a specific
 	  tcp port.
@@ -1116,7 +1123,7 @@ config LIBVIRT_GDB_BASEPORT
 	depends on LIBVIRT_ENABLE_GDB
 	help
 	  This option defines the base port to be used for the GDB.
-	  Esentially we need to make QEMU listen for an incoming connection from
+	  Essentially we need to make QEMU listen for an incoming connection from
 	  gdb on a TCP port. The default port is chosen to be 1234. However we
 	  introduce variability for assigning the port to each guest by defining
 	  a base port and adding an index to it based on the number of libvrt guest
playbooks/roles/gen_nodes/defaults/main.yml +1 -0
index 6a899be45128..2cf450b84281 100644
@@ -70,6 +70,7 @@ libvirt_extra_drive_id_prefix: 'drv'
 libvirt_extra_storage_drive_nvme: False
 libvirt_extra_storage_drive_virtio: False
 libvirt_extra_storage_drive_ide: False
+libvirt_extra_storage_drive_scsi: False
 libvirt_extra_storage_aio_mode: "native"
 libvirt_extra_storage_aio_cache_mode: "none"
 # Note that NVMe on qemu does not allow the physical block size
playbooks/roles/gen_nodes/templates/Vagrantfile.j2 +9 -2
index 2298c3455251..a52f5566280e 100644
@@ -244,7 +244,7 @@ Vagrant.configure("2") do |config|
         #
         # Just create a PCI or PCI-E root bus dedicated for extra drives. We
         # use 0x08 to place this PCI / PCI-E root bus as we know this is
-        # avilable on modern x86-64 systems. Eventually we may need to bump
+        # available on modern x86-64 systems. Eventually we may need to bump
         # this to 0x9, but it would be better instead to have vagant-libvirt
         # speak "add a new PCI or PCI-E root bus" and "add extra drives" whether
         # that is nvme or virtio.
@@ -252,7 +252,7 @@ Vagrant.configure("2") do |config|
 {% if not libvirt_override_machine_type %}
         # For i440x on x86_64 (default on libvirt as of today) we use PCI, not
         # PCI-E. Below assumes i440x. i440x cannot support CXL as it does not
-        # suport PCI-E.
+        # support PCI-E.
         libvirt.qemuargs :value => "-device"
         libvirt.qemuargs :value => "pci-bridge,id=custom-pci-for-{{ extra_disk_driver }},chassis_nr=1,bus=pci.0,addr=0x8"
 {% else %}
@@ -417,6 +417,13 @@ Vagrant.configure("2") do |config|
             libvirt.qemuargs :value => "file=#{extra_disk},format={{ libvirt_extra_drive_format }},if=none,aio={{ libvirt_extra_storage_aio_mode }},cache={{ libvirt_extra_storage_aio_cache_mode }},id=#{disk_id}"
             libvirt.qemuargs :value => "-device"
             libvirt.qemuargs :value => "virtio-blk-pci,drive=#{disk_id},id=virtio-#{disk_id},serial=#{serial_id},bus=#{bus_for_extra_drives},addr=#{pci_function},iothread=kdevops-virtio-iothread-#{port}#{extra_drive_largio_args},logical_block_size=#{virtio_lbs},physical_block_size=#{virtio_pbs}"
+{% elif libvirt_extra_storage_drive_scsi %}
+            libvirt.qemuargs :value => "-device"
+            libvirt.qemuargs :value => "virtio-scsi-pci,id=scsi#{port},bus=#{bus_for_extra_drives},addr=#{pci_function}"
+            libvirt.qemuargs :value => "-drive"
+            libvirt.qemuargs :value => "file=#{extra_disk},format={{ libvirt_extra_drive_format }},if=none,aio={{ libvirt_extra_storage_aio_mode }},cache={{ libvirt_extra_storage_aio_cache_mode }},id=#{disk_id}"
+            libvirt.qemuargs :value => "-device"
+            libvirt.qemuargs :value => "scsi-hd,drive=#{disk_id},bus=scsi#{port}.0"
 {% elif libvirt_extra_storage_drive_nvme  %}
             if ! largio
               nvme_lbs = "{{ libvirt_extra_storage_nvme_logical_block_size }}"
playbooks/roles/gen_nodes/templates/drives.j2 +22 -2
index 8327cd430981..1241b88a9379 100644
@@ -40,6 +40,26 @@ the drives can vary by type, so we have one macro by type of drive.
 {% endfor %}
 <!-- End of virtio drives-->
 {%- endmacro -%}
+{%- macro gen_drive_scsi(num_drives,
+                         kdevops_storage_pool_path,
+                         hostname,
+                         libvirt_extra_drive_format,
+                         libvirt_extra_storage_aio_mode,
+                         libvirt_extra_storage_aio_cache_mode) -%}
+<!-- We generated {{ num_drives }} scsi dives -->
+{% for n in range(0,num_drives) %}
+    <!-- This is scsi drive # {{ n + 1 }} -->
+    <qemu:arg value='-device'/>
+    <qemu:arg value='pcie-root-port,id=pcie-port-for-scsi-{{ n }},multifunction=on,bus=pcie.1,addr=0x{{ "%0x" | format( n | int) }},chassis=5{{ n }}'/>
+    <qemu:arg value='-device'/>
+    <qemu:arg value='virtio-scsi-pci,id=scsi{{ n }},bus=pcie-port-for-scsi-{{ n }},addr=0x0'/>
+    <qemu:arg value='-drive'/>
+    <qemu:arg value='file={{ kdevops_storage_pool_path }}/guestfs/{{ hostname }}/extra{{ n }}.{{ libvirt_extra_drive_format }},format={{ libvirt_extra_drive_format }},if=none,aio={{ libvirt_extra_storage_aio_mode }},cache={{ libvirt_extra_storage_aio_cache_mode }},id=drv{{ n }}'/>
+    <qemu:arg value='-device'/>
+    <qemu:arg value='scsi-hd,drive=drv{{ n }},bus=scsi{{ n }}.0'/>
+{% endfor %}
+<!-- End of scsi drives-->
+{%- endmacro -%}
 {%- macro gen_drive_large_io_virtio(libvirt_largeio_logical_compat,
 				    libvirt_largeio_logical_compat_size,
 				    libvirt_largeio_pow_limit,
@@ -49,7 +69,7 @@ the drives can vary by type, so we have one macro by type of drive.
 				    libvirt_extra_storage_aio_mode,
 				    libvirt_extra_storage_aio_cache_mode,
 				    kdevops_storage_pool_path) -%}
-<!-- These are virtio drives used for large IO experimentaiton, with LBS support -->
+<!-- These are virtio drives used for large IO experimentation, with LBS support -->
 {% set ns = namespace(lbs_idx=0)  %}
 {% set max_pbs = libvirt_largeio_logical_compat_size  * (2 ** libvirt_largeio_pow_limit) %}
 {% for n in range(0,libvirt_largeio_pow_limit+1) %}
@@ -106,7 +126,7 @@ the drives can vary by type, so we have one macro by type of drive.
 				  libvirt_extra_storage_aio_mode,
 				  libvirt_extra_storage_aio_cache_mode,
 				  kdevops_storage_pool_path) -%}
-<!-- These are NVMe drives used for large IO experimentaiton, with LBS support -->
+<!-- These are NVMe drives used for large IO experimentation, with LBS support -->
 {% set ns = namespace(lbs_idx=0)  %}
 {% set max_pbs = libvirt_largeio_logical_compat_size  * (2 ** libvirt_largeio_pow_limit) %}
 {% for n in range(0,libvirt_largeio_pow_limit+1) %}
playbooks/roles/gen_nodes/templates/gen_drives.j2 +14 -7
index 874e5b0623b9..2de13da4ab8e 100644
@@ -19,14 +19,21 @@
 				    kdevops_storage_pool_path) }}
 {% else %}
 {{ drives.gen_drive_virtio(4,
-			   kdevops_storage_pool_path,
-			   hostname,
-			   libvirt_extra_drive_format,
-			   libvirt_extra_storage_aio_mode,
-			   libvirt_extra_storage_aio_cache_mode,
-			   libvirt_extra_storage_virtio_logical_block_size,
-			   libvirt_extra_storage_virtio_physical_block_size) }}
+                           kdevops_storage_pool_path,
+                           hostname,
+                           libvirt_extra_drive_format,
+                           libvirt_extra_storage_aio_mode,
+                           libvirt_extra_storage_aio_cache_mode,
+                           libvirt_extra_storage_virtio_logical_block_size,
+                           libvirt_extra_storage_virtio_physical_block_size) }}
 {% endif %}
+{% elif libvirt_extra_storage_drive_scsi %}
+{{ drives.gen_drive_scsi(4,
+                         kdevops_storage_pool_path,
+                         hostname,
+                         libvirt_extra_drive_format,
+                         libvirt_extra_storage_aio_mode,
+                         libvirt_extra_storage_aio_cache_mode) }}
 {% elif libvirt_extra_storage_drive_nvme  %}
 {% if libvirt_largeio_enable %}
 {{ drives.gen_drive_large_io_nvme(libvirt_largeio_logical_compat,
playbooks/roles/gen_nodes/templates/kdevops_nodes_split_start.j2.yaml +10 -0
index e5b88efefc63..91e105cd3bff 100644
@@ -76,6 +76,16 @@ vagrant_global:
       physical_block_size: {{ libvirt_extra_storage_virtio_physical_block_size }}
       logical_block_size: {{ libvirt_extra_storage_virtio_logical_block_size }}
 {% endif %}
+{% elif libvirt_extra_storage_drive_scsi %}
+  extra_disks:
+    data:
+      size: 102400
+    scratch:
+      size: 102400
+    extra1:
+      size: 102400
+    extra2:
+      size: 102400
 {% elif libvirt_extra_storage_drive_nvme %}
   extra_disks:
     data:
workflows/steady_state/Kconfig +0 -0
index 335b833cfbcc..f7064d078c0a 100644

workflows/steady_state/Kconfig config SSD_STEADY_STATE_DEVICE · line 12

Quoted 7 lines
workflows/steady_state/Kconfig +1 -0
@@ -6,6 +6,7 @@ config SSD_STEADY_STATE_DEVICE
     default "/dev/disk/by-id/nvme-QEMU_NVMe_Ctrl_kdevops1" if LIBVIRT && LIBVIRT_EXTRA_STORAGE_DRIVE_NVME
     default "/dev/disk/by-id/virtio-kdevops1" if LIBVIRT && LIBVIRT_EXTRA_STORAGE_DRIVE_VIRTIO
     default "/dev/disk/by-id/ata-QEMU_HARDDISK_kdevops1" if LIBVIRT && LIBVIRT_EXTRA_STORAGE_DRIVE_IDE
+    default "/dev/sdc" if LIBVIRT && LIBVIRT_EXTRA_STORAGE_DRIVE_SCSI
     default "/dev/nvme2n1" if TERRAFORM_AWS_INSTANCE_M5AD_4XLARGE
     default "/dev/nvme1n1" if TERRAFORM_GCE
     default "/dev/sdd" if TERRAFORM_AZURE

I would split the spelling corrections into a separate patch. That might even be helpful for LLM training.

This patch looks like it is missing a change to

playbooks/roles/volume_group/tasks/guestfs.yml

Add a task specific to guestfs SCSI drives after the IDE task. You can test by running the pynfs workflow, which will try to set up a single guest with NFSD and an LVM group made from these disk devices.

Signature · 1 line
Chuck Lever
#2 lore raw
Quoted 253 lines · Chuck Lever
Quoted 252 lines · Luis Chamberlain

From: Luis Chamberlain <[email protected]>

Add scsi device support for virtualization.

Generated-by ChatGPT Codex
---
 defconfigs/blktests_scsi                      |  2 +-
 kconfigs/Kconfig.libvirt                      | 25 ++++++++++++-------
 playbooks/roles/gen_nodes/defaults/main.yml   |  1 +
 .../roles/gen_nodes/templates/Vagrantfile.j2  | 11 ++++++--
 playbooks/roles/gen_nodes/templates/drives.j2 | 24 ++++++++++++++++--
 .../roles/gen_nodes/templates/gen_drives.j2   | 21 ++++++++++------
 .../kdevops_nodes_split_start.j2.yaml         | 10 ++++++++
 workflows/steady_state/Kconfig                |  1 +
 8 files changed, 74 insertions(+), 21 deletions(-)
defconfigs/blktests_scsi +1 -1
index d49e72893690..28462939e11e 100644
@@ -9,7 +9,7 @@ CONFIG_GUESTFS_BRINGUP_DEBUG_1=y
 CONFIG_BOOTLINUX=y
 CONFIG_BOOTLINUX_9P=y
 
-CONFIG_LIBVIRT_EXTRA_STORAGE_DRIVE_NVME=y
+CONFIG_LIBVIRT_EXTRA_STORAGE_DRIVE_SCSI=y
 
 CONFIG_WORKFLOWS_TESTS=y
 CONFIG_WORKFLOWS_LINUX_TESTS=y
kconfigs/Kconfig.libvirt +16 -9
index 8654eb9b1a06..f737b79faea4 100644
@@ -487,7 +487,7 @@ config LIBVIRT_MACHINE_TYPE_DEFAULT
 	  is the old i440x, so you will not get PCIe support.
 
 	  We only want to support PCI-E capable guests with libguest so the
-	  deafult is not allowed on libguest.
+	  default is not allowed on libguest.
 
 config LIBVIRT_MACHINE_TYPE_Q35
 	bool "q35"
@@ -548,11 +548,18 @@ config LIBVIRT_EXTRA_STORAGE_DRIVE_VIRTIO
 	  you won't be able to test ZNS.
 
 config LIBVIRT_EXTRA_STORAGE_DRIVE_IDE
-	bool "ide"
-	output yaml
-	help
-	  Use the QEMU ide driver for extra storage drives. This is useful for
-	  really old Linux distributions that lack the virtio backend driver.
+        bool "ide"
+        output yaml
+        help
+          Use the QEMU ide driver for extra storage drives. This is useful for
+          really old Linux distributions that lack the virtio backend driver.
+
+config LIBVIRT_EXTRA_STORAGE_DRIVE_SCSI
+        bool "scsi"
+        output yaml
+        help
+          Use the QEMU SCSI driver for extra storage drives. This relies on a
+          virtio-scsi controller with scsi-hd devices attached.
 
 endchoice
 
@@ -817,7 +824,7 @@ config LIBVIRT_AIO_MODE_NATIVE
 	help
 	  Use the aio=native mode. For some older kernels it is known that
 	  native will cause corruption if used on ext4 or xfs filesystem if
-	  you also use cace=none. This corruption is documented for RHEL:
+	  you also use cache=none. This corruption is documented for RHEL:
 
 	  https://access.redhat.com/articles/41313
 	  https://bugzilla.redhat.com/show_bug.cgi?id=615309
@@ -1104,7 +1111,7 @@ config LIBVIRT_ENABLE_GDB
 	output yaml
 	help
 	  Select this option if you want to enable debugging support for GDB.
-	  By default , it is assumed that gdb is disabled since we dont want
+	  By default , it is assumed that gdb is disabled since we don't want
 	  to complicate this for the CI runs. If enabled then libvirt guest
 	  xml for each guest will be configured to use gdb on a specific
 	  tcp port.
@@ -1116,7 +1123,7 @@ config LIBVIRT_GDB_BASEPORT
 	depends on LIBVIRT_ENABLE_GDB
 	help
 	  This option defines the base port to be used for the GDB.
-	  Esentially we need to make QEMU listen for an incoming connection from
+	  Essentially we need to make QEMU listen for an incoming connection from
 	  gdb on a TCP port. The default port is chosen to be 1234. However we
 	  introduce variability for assigning the port to each guest by defining
 	  a base port and adding an index to it based on the number of libvrt guest
playbooks/roles/gen_nodes/defaults/main.yml +1 -0
index 6a899be45128..2cf450b84281 100644
@@ -70,6 +70,7 @@ libvirt_extra_drive_id_prefix: 'drv'
 libvirt_extra_storage_drive_nvme: False
 libvirt_extra_storage_drive_virtio: False
 libvirt_extra_storage_drive_ide: False
+libvirt_extra_storage_drive_scsi: False
 libvirt_extra_storage_aio_mode: "native"
 libvirt_extra_storage_aio_cache_mode: "none"
 # Note that NVMe on qemu does not allow the physical block size
playbooks/roles/gen_nodes/templates/Vagrantfile.j2 +9 -2
index 2298c3455251..a52f5566280e 100644
@@ -244,7 +244,7 @@ Vagrant.configure("2") do |config|
         #
         # Just create a PCI or PCI-E root bus dedicated for extra drives. We
         # use 0x08 to place this PCI / PCI-E root bus as we know this is
-        # avilable on modern x86-64 systems. Eventually we may need to bump
+        # available on modern x86-64 systems. Eventually we may need to bump
         # this to 0x9, but it would be better instead to have vagant-libvirt
         # speak "add a new PCI or PCI-E root bus" and "add extra drives" whether
         # that is nvme or virtio.
@@ -252,7 +252,7 @@ Vagrant.configure("2") do |config|
 {% if not libvirt_override_machine_type %}
         # For i440x on x86_64 (default on libvirt as of today) we use PCI, not
         # PCI-E. Below assumes i440x. i440x cannot support CXL as it does not
-        # suport PCI-E.
+        # support PCI-E.
         libvirt.qemuargs :value => "-device"
         libvirt.qemuargs :value => "pci-bridge,id=custom-pci-for-{{ extra_disk_driver }},chassis_nr=1,bus=pci.0,addr=0x8"
 {% else %}
@@ -417,6 +417,13 @@ Vagrant.configure("2") do |config|
             libvirt.qemuargs :value => "file=#{extra_disk},format={{ libvirt_extra_drive_format }},if=none,aio={{ libvirt_extra_storage_aio_mode }},cache={{ libvirt_extra_storage_aio_cache_mode }},id=#{disk_id}"
             libvirt.qemuargs :value => "-device"
             libvirt.qemuargs :value => "virtio-blk-pci,drive=#{disk_id},id=virtio-#{disk_id},serial=#{serial_id},bus=#{bus_for_extra_drives},addr=#{pci_function},iothread=kdevops-virtio-iothread-#{port}#{extra_drive_largio_args},logical_block_size=#{virtio_lbs},physical_block_size=#{virtio_pbs}"
+{% elif libvirt_extra_storage_drive_scsi %}
+            libvirt.qemuargs :value => "-device"
+            libvirt.qemuargs :value => "virtio-scsi-pci,id=scsi#{port},bus=#{bus_for_extra_drives},addr=#{pci_function}"
+            libvirt.qemuargs :value => "-drive"
+            libvirt.qemuargs :value => "file=#{extra_disk},format={{ libvirt_extra_drive_format }},if=none,aio={{ libvirt_extra_storage_aio_mode }},cache={{ libvirt_extra_storage_aio_cache_mode }},id=#{disk_id}"
+            libvirt.qemuargs :value => "-device"
+            libvirt.qemuargs :value => "scsi-hd,drive=#{disk_id},bus=scsi#{port}.0"
 {% elif libvirt_extra_storage_drive_nvme  %}
             if ! largio
               nvme_lbs = "{{ libvirt_extra_storage_nvme_logical_block_size }}"
playbooks/roles/gen_nodes/templates/drives.j2 +22 -2
index 8327cd430981..1241b88a9379 100644
@@ -40,6 +40,26 @@ the drives can vary by type, so we have one macro by type of drive.
 {% endfor %}
 <!-- End of virtio drives-->
 {%- endmacro -%}
+{%- macro gen_drive_scsi(num_drives,
+                         kdevops_storage_pool_path,
+                         hostname,
+                         libvirt_extra_drive_format,
+                         libvirt_extra_storage_aio_mode,
+                         libvirt_extra_storage_aio_cache_mode) -%}
+<!-- We generated {{ num_drives }} scsi dives -->
+{% for n in range(0,num_drives) %}
+    <!-- This is scsi drive # {{ n + 1 }} -->
+    <qemu:arg value='-device'/>
+    <qemu:arg value='pcie-root-port,id=pcie-port-for-scsi-{{ n }},multifunction=on,bus=pcie.1,addr=0x{{ "%0x" | format( n | int) }},chassis=5{{ n }}'/>
+    <qemu:arg value='-device'/>
+    <qemu:arg value='virtio-scsi-pci,id=scsi{{ n }},bus=pcie-port-for-scsi-{{ n }},addr=0x0'/>
+    <qemu:arg value='-drive'/>
+    <qemu:arg value='file={{ kdevops_storage_pool_path }}/guestfs/{{ hostname }}/extra{{ n }}.{{ libvirt_extra_drive_format }},format={{ libvirt_extra_drive_format }},if=none,aio={{ libvirt_extra_storage_aio_mode }},cache={{ libvirt_extra_storage_aio_cache_mode }},id=drv{{ n }}'/>
+    <qemu:arg value='-device'/>
+    <qemu:arg value='scsi-hd,drive=drv{{ n }},bus=scsi{{ n }}.0'/>
+{% endfor %}
+<!-- End of scsi drives-->
+{%- endmacro -%}
 {%- macro gen_drive_large_io_virtio(libvirt_largeio_logical_compat,
 				    libvirt_largeio_logical_compat_size,
 				    libvirt_largeio_pow_limit,
@@ -49,7 +69,7 @@ the drives can vary by type, so we have one macro by type of drive.
 				    libvirt_extra_storage_aio_mode,
 				    libvirt_extra_storage_aio_cache_mode,
 				    kdevops_storage_pool_path) -%}
-<!-- These are virtio drives used for large IO experimentaiton, with LBS support -->
+<!-- These are virtio drives used for large IO experimentation, with LBS support -->
 {% set ns = namespace(lbs_idx=0)  %}
 {% set max_pbs = libvirt_largeio_logical_compat_size  * (2 ** libvirt_largeio_pow_limit) %}
 {% for n in range(0,libvirt_largeio_pow_limit+1) %}
@@ -106,7 +126,7 @@ the drives can vary by type, so we have one macro by type of drive.
 				  libvirt_extra_storage_aio_mode,
 				  libvirt_extra_storage_aio_cache_mode,
 				  kdevops_storage_pool_path) -%}
-<!-- These are NVMe drives used for large IO experimentaiton, with LBS support -->
+<!-- These are NVMe drives used for large IO experimentation, with LBS support -->
 {% set ns = namespace(lbs_idx=0)  %}
 {% set max_pbs = libvirt_largeio_logical_compat_size  * (2 ** libvirt_largeio_pow_limit) %}
 {% for n in range(0,libvirt_largeio_pow_limit+1) %}
playbooks/roles/gen_nodes/templates/gen_drives.j2 +14 -7
index 874e5b0623b9..2de13da4ab8e 100644
@@ -19,14 +19,21 @@
 				    kdevops_storage_pool_path) }}
 {% else %}
 {{ drives.gen_drive_virtio(4,
-			   kdevops_storage_pool_path,
-			   hostname,
-			   libvirt_extra_drive_format,
-			   libvirt_extra_storage_aio_mode,
-			   libvirt_extra_storage_aio_cache_mode,
-			   libvirt_extra_storage_virtio_logical_block_size,
-			   libvirt_extra_storage_virtio_physical_block_size) }}
+                           kdevops_storage_pool_path,
+                           hostname,
+                           libvirt_extra_drive_format,
+                           libvirt_extra_storage_aio_mode,
+                           libvirt_extra_storage_aio_cache_mode,
+                           libvirt_extra_storage_virtio_logical_block_size,
+                           libvirt_extra_storage_virtio_physical_block_size) }}
 {% endif %}
+{% elif libvirt_extra_storage_drive_scsi %}
+{{ drives.gen_drive_scsi(4,
+                         kdevops_storage_pool_path,
+                         hostname,
+                         libvirt_extra_drive_format,
+                         libvirt_extra_storage_aio_mode,
+                         libvirt_extra_storage_aio_cache_mode) }}
 {% elif libvirt_extra_storage_drive_nvme  %}
 {% if libvirt_largeio_enable %}
 {{ drives.gen_drive_large_io_nvme(libvirt_largeio_logical_compat,
playbooks/roles/gen_nodes/templates/kdevops_nodes_split_start.j2.yaml +10 -0
index e5b88efefc63..91e105cd3bff 100644
@@ -76,6 +76,16 @@ vagrant_global:
       physical_block_size: {{ libvirt_extra_storage_virtio_physical_block_size }}
       logical_block_size: {{ libvirt_extra_storage_virtio_logical_block_size }}
 {% endif %}
+{% elif libvirt_extra_storage_drive_scsi %}
+  extra_disks:
+    data:
+      size: 102400
+    scratch:
+      size: 102400
+    extra1:
+      size: 102400
+    extra2:
+      size: 102400
 {% elif libvirt_extra_storage_drive_nvme %}
   extra_disks:
     data:
workflows/steady_state/Kconfig +0 -0
index 335b833cfbcc..f7064d078c0a 100644
@@ -6,6 +6,7 @@ config SSD_STEADY_STATE_DEVICE
     default "/dev/disk/by-id/nvme-QEMU_NVMe_Ctrl_kdevops1" if LIBVIRT && LIBVIRT_EXTRA_STORAGE_DRIVE_NVME
     default "/dev/disk/by-id/virtio-kdevops1" if LIBVIRT && LIBVIRT_EXTRA_STORAGE_DRIVE_VIRTIO
Quoted 8 lines

workflows/steady_state/Kconfig config SSD_STEADY_STATE_DEVICE · line 12

Quoted 5 lines
workflows/steady_state/Kconfig +1 -0
     default "/dev/disk/by-id/ata-QEMU_HARDDISK_kdevops1" if LIBVIRT && LIBVIRT_EXTRA_STORAGE_DRIVE_IDE
+    default "/dev/sdc" if LIBVIRT && LIBVIRT_EXTRA_STORAGE_DRIVE_SCSI
     default "/dev/nvme2n1" if TERRAFORM_AWS_INSTANCE_M5AD_4XLARGE
     default "/dev/nvme1n1" if TERRAFORM_GCE
     default "/dev/sdd" if TERRAFORM_AZURE

I would split the spelling corrections into a separate patch. That might even be helpful for LLM training.

Sure I can do that.

Quoted 7 lines

This patch looks like it is missing a change to

playbooks/roles/volume_group/tasks/guestfs.yml

Add a task specific to guestfs SCSI drives after the IDE task. You can test by running the pynfs workflow, which will try to set up a single guest with NFSD and an LVM group made from these disk devices.

Are you OK if I add this after this patch, I'd like to test codex to see if I can just input your requirement to do that. It used to be AI for kdevops was gettind D grading, I am now grading it at B with Codex.

Luis

#3 lore raw
Quoted 269 lines · Luis Chamberlain
Quoted 253 lines · Chuck Lever
Quoted 252 lines · Luis Chamberlain

From: Luis Chamberlain <[email protected]>

Add scsi device support for virtualization.

Generated-by ChatGPT Codex
---
 defconfigs/blktests_scsi                      |  2 +-
 kconfigs/Kconfig.libvirt                      | 25 ++++++++++++-------
 playbooks/roles/gen_nodes/defaults/main.yml   |  1 +
 .../roles/gen_nodes/templates/Vagrantfile.j2  | 11 ++++++--
 playbooks/roles/gen_nodes/templates/drives.j2 | 24 ++++++++++++++++--
 .../roles/gen_nodes/templates/gen_drives.j2   | 21 ++++++++++------
 .../kdevops_nodes_split_start.j2.yaml         | 10 ++++++++
 workflows/steady_state/Kconfig                |  1 +
 8 files changed, 74 insertions(+), 21 deletions(-)
defconfigs/blktests_scsi +1 -1
index d49e72893690..28462939e11e 100644
@@ -9,7 +9,7 @@ CONFIG_GUESTFS_BRINGUP_DEBUG_1=y
 CONFIG_BOOTLINUX=y
 CONFIG_BOOTLINUX_9P=y
 
-CONFIG_LIBVIRT_EXTRA_STORAGE_DRIVE_NVME=y
+CONFIG_LIBVIRT_EXTRA_STORAGE_DRIVE_SCSI=y
 
 CONFIG_WORKFLOWS_TESTS=y
 CONFIG_WORKFLOWS_LINUX_TESTS=y
kconfigs/Kconfig.libvirt +16 -9
index 8654eb9b1a06..f737b79faea4 100644
@@ -487,7 +487,7 @@ config LIBVIRT_MACHINE_TYPE_DEFAULT
 	  is the old i440x, so you will not get PCIe support.
 
 	  We only want to support PCI-E capable guests with libguest so the
-	  deafult is not allowed on libguest.
+	  default is not allowed on libguest.
 
 config LIBVIRT_MACHINE_TYPE_Q35
 	bool "q35"
@@ -548,11 +548,18 @@ config LIBVIRT_EXTRA_STORAGE_DRIVE_VIRTIO
 	  you won't be able to test ZNS.
 
 config LIBVIRT_EXTRA_STORAGE_DRIVE_IDE
-	bool "ide"
-	output yaml
-	help
-	  Use the QEMU ide driver for extra storage drives. This is useful for
-	  really old Linux distributions that lack the virtio backend driver.
+        bool "ide"
+        output yaml
+        help
+          Use the QEMU ide driver for extra storage drives. This is useful for
+          really old Linux distributions that lack the virtio backend driver.
+
+config LIBVIRT_EXTRA_STORAGE_DRIVE_SCSI
+        bool "scsi"
+        output yaml
+        help
+          Use the QEMU SCSI driver for extra storage drives. This relies on a
+          virtio-scsi controller with scsi-hd devices attached.
 
 endchoice
 
@@ -817,7 +824,7 @@ config LIBVIRT_AIO_MODE_NATIVE
 	help
 	  Use the aio=native mode. For some older kernels it is known that
 	  native will cause corruption if used on ext4 or xfs filesystem if
-	  you also use cace=none. This corruption is documented for RHEL:
+	  you also use cache=none. This corruption is documented for RHEL:
 
 	  https://access.redhat.com/articles/41313
 	  https://bugzilla.redhat.com/show_bug.cgi?id=615309
@@ -1104,7 +1111,7 @@ config LIBVIRT_ENABLE_GDB
 	output yaml
 	help
 	  Select this option if you want to enable debugging support for GDB.
-	  By default , it is assumed that gdb is disabled since we dont want
+	  By default , it is assumed that gdb is disabled since we don't want
 	  to complicate this for the CI runs. If enabled then libvirt guest
 	  xml for each guest will be configured to use gdb on a specific
 	  tcp port.
@@ -1116,7 +1123,7 @@ config LIBVIRT_GDB_BASEPORT
 	depends on LIBVIRT_ENABLE_GDB
 	help
 	  This option defines the base port to be used for the GDB.
-	  Esentially we need to make QEMU listen for an incoming connection from
+	  Essentially we need to make QEMU listen for an incoming connection from
 	  gdb on a TCP port. The default port is chosen to be 1234. However we
 	  introduce variability for assigning the port to each guest by defining
 	  a base port and adding an index to it based on the number of libvrt guest
playbooks/roles/gen_nodes/defaults/main.yml +1 -0
index 6a899be45128..2cf450b84281 100644
@@ -70,6 +70,7 @@ libvirt_extra_drive_id_prefix: 'drv'
 libvirt_extra_storage_drive_nvme: False
 libvirt_extra_storage_drive_virtio: False
 libvirt_extra_storage_drive_ide: False
+libvirt_extra_storage_drive_scsi: False
 libvirt_extra_storage_aio_mode: "native"
 libvirt_extra_storage_aio_cache_mode: "none"
 # Note that NVMe on qemu does not allow the physical block size
playbooks/roles/gen_nodes/templates/Vagrantfile.j2 +9 -2
index 2298c3455251..a52f5566280e 100644
@@ -244,7 +244,7 @@ Vagrant.configure("2") do |config|
         #
         # Just create a PCI or PCI-E root bus dedicated for extra drives. We
         # use 0x08 to place this PCI / PCI-E root bus as we know this is
-        # avilable on modern x86-64 systems. Eventually we may need to bump
+        # available on modern x86-64 systems. Eventually we may need to bump
         # this to 0x9, but it would be better instead to have vagant-libvirt
         # speak "add a new PCI or PCI-E root bus" and "add extra drives" whether
         # that is nvme or virtio.
@@ -252,7 +252,7 @@ Vagrant.configure("2") do |config|
 {% if not libvirt_override_machine_type %}
         # For i440x on x86_64 (default on libvirt as of today) we use PCI, not
         # PCI-E. Below assumes i440x. i440x cannot support CXL as it does not
-        # suport PCI-E.
+        # support PCI-E.
         libvirt.qemuargs :value => "-device"
         libvirt.qemuargs :value => "pci-bridge,id=custom-pci-for-{{ extra_disk_driver }},chassis_nr=1,bus=pci.0,addr=0x8"
 {% else %}
@@ -417,6 +417,13 @@ Vagrant.configure("2") do |config|
             libvirt.qemuargs :value => "file=#{extra_disk},format={{ libvirt_extra_drive_format }},if=none,aio={{ libvirt_extra_storage_aio_mode }},cache={{ libvirt_extra_storage_aio_cache_mode }},id=#{disk_id}"
             libvirt.qemuargs :value => "-device"
             libvirt.qemuargs :value => "virtio-blk-pci,drive=#{disk_id},id=virtio-#{disk_id},serial=#{serial_id},bus=#{bus_for_extra_drives},addr=#{pci_function},iothread=kdevops-virtio-iothread-#{port}#{extra_drive_largio_args},logical_block_size=#{virtio_lbs},physical_block_size=#{virtio_pbs}"
+{% elif libvirt_extra_storage_drive_scsi %}
+            libvirt.qemuargs :value => "-device"
+            libvirt.qemuargs :value => "virtio-scsi-pci,id=scsi#{port},bus=#{bus_for_extra_drives},addr=#{pci_function}"
+            libvirt.qemuargs :value => "-drive"
+            libvirt.qemuargs :value => "file=#{extra_disk},format={{ libvirt_extra_drive_format }},if=none,aio={{ libvirt_extra_storage_aio_mode }},cache={{ libvirt_extra_storage_aio_cache_mode }},id=#{disk_id}"
+            libvirt.qemuargs :value => "-device"
+            libvirt.qemuargs :value => "scsi-hd,drive=#{disk_id},bus=scsi#{port}.0"
 {% elif libvirt_extra_storage_drive_nvme  %}
             if ! largio
               nvme_lbs = "{{ libvirt_extra_storage_nvme_logical_block_size }}"
playbooks/roles/gen_nodes/templates/drives.j2 +22 -2
index 8327cd430981..1241b88a9379 100644
@@ -40,6 +40,26 @@ the drives can vary by type, so we have one macro by type of drive.
 {% endfor %}
 <!-- End of virtio drives-->
 {%- endmacro -%}
+{%- macro gen_drive_scsi(num_drives,
+                         kdevops_storage_pool_path,
+                         hostname,
+                         libvirt_extra_drive_format,
+                         libvirt_extra_storage_aio_mode,
+                         libvirt_extra_storage_aio_cache_mode) -%}
+<!-- We generated {{ num_drives }} scsi dives -->
+{% for n in range(0,num_drives) %}
+    <!-- This is scsi drive # {{ n + 1 }} -->
+    <qemu:arg value='-device'/>
+    <qemu:arg value='pcie-root-port,id=pcie-port-for-scsi-{{ n }},multifunction=on,bus=pcie.1,addr=0x{{ "%0x" | format( n | int) }},chassis=5{{ n }}'/>
+    <qemu:arg value='-device'/>
+    <qemu:arg value='virtio-scsi-pci,id=scsi{{ n }},bus=pcie-port-for-scsi-{{ n }},addr=0x0'/>
+    <qemu:arg value='-drive'/>
+    <qemu:arg value='file={{ kdevops_storage_pool_path }}/guestfs/{{ hostname }}/extra{{ n }}.{{ libvirt_extra_drive_format }},format={{ libvirt_extra_drive_format }},if=none,aio={{ libvirt_extra_storage_aio_mode }},cache={{ libvirt_extra_storage_aio_cache_mode }},id=drv{{ n }}'/>
+    <qemu:arg value='-device'/>
+    <qemu:arg value='scsi-hd,drive=drv{{ n }},bus=scsi{{ n }}.0'/>
+{% endfor %}
+<!-- End of scsi drives-->
+{%- endmacro -%}
 {%- macro gen_drive_large_io_virtio(libvirt_largeio_logical_compat,
 				    libvirt_largeio_logical_compat_size,
 				    libvirt_largeio_pow_limit,
@@ -49,7 +69,7 @@ the drives can vary by type, so we have one macro by type of drive.
 				    libvirt_extra_storage_aio_mode,
 				    libvirt_extra_storage_aio_cache_mode,
 				    kdevops_storage_pool_path) -%}
-<!-- These are virtio drives used for large IO experimentaiton, with LBS support -->
+<!-- These are virtio drives used for large IO experimentation, with LBS support -->
 {% set ns = namespace(lbs_idx=0)  %}
 {% set max_pbs = libvirt_largeio_logical_compat_size  * (2 ** libvirt_largeio_pow_limit) %}
 {% for n in range(0,libvirt_largeio_pow_limit+1) %}
@@ -106,7 +126,7 @@ the drives can vary by type, so we have one macro by type of drive.
 				  libvirt_extra_storage_aio_mode,
 				  libvirt_extra_storage_aio_cache_mode,
 				  kdevops_storage_pool_path) -%}
-<!-- These are NVMe drives used for large IO experimentaiton, with LBS support -->
+<!-- These are NVMe drives used for large IO experimentation, with LBS support -->
 {% set ns = namespace(lbs_idx=0)  %}
 {% set max_pbs = libvirt_largeio_logical_compat_size  * (2 ** libvirt_largeio_pow_limit) %}
 {% for n in range(0,libvirt_largeio_pow_limit+1) %}
playbooks/roles/gen_nodes/templates/gen_drives.j2 +14 -7
index 874e5b0623b9..2de13da4ab8e 100644
@@ -19,14 +19,21 @@
 				    kdevops_storage_pool_path) }}
 {% else %}
 {{ drives.gen_drive_virtio(4,
-			   kdevops_storage_pool_path,
-			   hostname,
-			   libvirt_extra_drive_format,
-			   libvirt_extra_storage_aio_mode,
-			   libvirt_extra_storage_aio_cache_mode,
-			   libvirt_extra_storage_virtio_logical_block_size,
-			   libvirt_extra_storage_virtio_physical_block_size) }}
+                           kdevops_storage_pool_path,
+                           hostname,
+                           libvirt_extra_drive_format,
+                           libvirt_extra_storage_aio_mode,
+                           libvirt_extra_storage_aio_cache_mode,
+                           libvirt_extra_storage_virtio_logical_block_size,
+                           libvirt_extra_storage_virtio_physical_block_size) }}
 {% endif %}
+{% elif libvirt_extra_storage_drive_scsi %}
+{{ drives.gen_drive_scsi(4,
+                         kdevops_storage_pool_path,
+                         hostname,
+                         libvirt_extra_drive_format,
+                         libvirt_extra_storage_aio_mode,
+                         libvirt_extra_storage_aio_cache_mode) }}
 {% elif libvirt_extra_storage_drive_nvme  %}
 {% if libvirt_largeio_enable %}
 {{ drives.gen_drive_large_io_nvme(libvirt_largeio_logical_compat,
playbooks/roles/gen_nodes/templates/kdevops_nodes_split_start.j2.yaml +10 -0
index e5b88efefc63..91e105cd3bff 100644
@@ -76,6 +76,16 @@ vagrant_global:
       physical_block_size: {{ libvirt_extra_storage_virtio_physical_block_size }}
       logical_block_size: {{ libvirt_extra_storage_virtio_logical_block_size }}
 {% endif %}
+{% elif libvirt_extra_storage_drive_scsi %}
+  extra_disks:
+    data:
+      size: 102400
+    scratch:
+      size: 102400
+    extra1:
+      size: 102400
+    extra2:
+      size: 102400
 {% elif libvirt_extra_storage_drive_nvme %}
   extra_disks:
     data:
workflows/steady_state/Kconfig +0 -0
index 335b833cfbcc..f7064d078c0a 100644
@@ -6,6 +6,7 @@ config SSD_STEADY_STATE_DEVICE
     default "/dev/disk/by-id/nvme-QEMU_NVMe_Ctrl_kdevops1" if LIBVIRT && LIBVIRT_EXTRA_STORAGE_DRIVE_NVME
     default "/dev/disk/by-id/virtio-kdevops1" if LIBVIRT && LIBVIRT_EXTRA_STORAGE_DRIVE_VIRTIO
Quoted 8 lines

workflows/steady_state/Kconfig config SSD_STEADY_STATE_DEVICE · line 12

Quoted 5 lines
workflows/steady_state/Kconfig +1 -0
     default "/dev/disk/by-id/ata-QEMU_HARDDISK_kdevops1" if LIBVIRT && LIBVIRT_EXTRA_STORAGE_DRIVE_IDE
+    default "/dev/sdc" if LIBVIRT && LIBVIRT_EXTRA_STORAGE_DRIVE_SCSI
     default "/dev/nvme2n1" if TERRAFORM_AWS_INSTANCE_M5AD_4XLARGE
     default "/dev/nvme1n1" if TERRAFORM_GCE
     default "/dev/sdd" if TERRAFORM_AZURE

I would split the spelling corrections into a separate patch. That might even be helpful for LLM training.

Sure I can do that.

Quoted 4 lines

This patch looks like it is missing a change to

playbooks/roles/volume_group/tasks/guestfs.yml

Quoted 7 lines
Quoted 3 lines

Add a task specific to guestfs SCSI drives after the IDE task. You can test by running the pynfs workflow, which will try to set up a single guest with NFSD and an LVM group made from these disk devices.

Are you OK if I add this after this patch, I'd like to test codex to see if I can just input your requirement to do that. It used to be AI for kdevops was gettind D grading, I am now grading it at B with Codex.

I don't think there's a strong concern about bisect-ability here, so it should be OK as a separate patch.

Signature · 1 line
Chuck Lever
#6 lore raw
In reply to Luis Chamberlain
Quoted 6 lines · Luis Chamberlain

From: Luis Chamberlain <[email protected]>

Add scsi device support for virtualization.

Generated-by ChatGPT Codex

I know this has been merged already. Still, here some minor comments:

Quoted 42 lines
---
 defconfigs/blktests_scsi                      |  2 +-
 kconfigs/Kconfig.libvirt                      | 25 ++++++++++++-------
 playbooks/roles/gen_nodes/defaults/main.yml   |  1 +
 .../roles/gen_nodes/templates/Vagrantfile.j2  | 11 ++++++--
 playbooks/roles/gen_nodes/templates/drives.j2 | 24 ++++++++++++++++--
 .../roles/gen_nodes/templates/gen_drives.j2   | 21 ++++++++++------
 .../kdevops_nodes_split_start.j2.yaml         | 10 ++++++++
 workflows/steady_state/Kconfig                |  1 +
 8 files changed, 74 insertions(+), 21 deletions(-)
defconfigs/blktests_scsi +1 -1
index d49e72893690..28462939e11e 100644
@@ -9,7 +9,7 @@ CONFIG_GUESTFS_BRINGUP_DEBUG_1=y
 CONFIG_BOOTLINUX=y
 CONFIG_BOOTLINUX_9P=y
 
-CONFIG_LIBVIRT_EXTRA_STORAGE_DRIVE_NVME=y
+CONFIG_LIBVIRT_EXTRA_STORAGE_DRIVE_SCSI=y
 
 CONFIG_WORKFLOWS_TESTS=y
 CONFIG_WORKFLOWS_LINUX_TESTS=y
kconfigs/Kconfig.libvirt +1 -2
index 8654eb9b1a06..f737b79faea4 100644
@@ -487,7 +487,7 @@ config LIBVIRT_MACHINE_TYPE_DEFAULT
 	  is the old i440x, so you will not get PCIe support.
 
 	  We only want to support PCI-E capable guests with libguest so the
-	  deafult is not allowed on libguest.
+	  default is not allowed on libguest.
 
 config LIBVIRT_MACHINE_TYPE_Q35
 	bool "q35"
@@ -548,11 +548,18 @@ config LIBVIRT_EXTRA_STORAGE_DRIVE_VIRTIO
 	  you won't be able to test ZNS.
 
 config LIBVIRT_EXTRA_STORAGE_DRIVE_IDE
-	bool "ide"

kconfigs/Kconfig.libvirt config LIBVIRT_EXTRA_STORAGE_DRIVE_VIRTIO · line 556

Quoted 10 lines
kconfigs/Kconfig.libvirt +6 -4
-	output yaml
-	help
-	  Use the QEMU ide driver for extra storage drives. This is useful for
-	  really old Linux distributions that lack the virtio backend driver.
+        bool "ide"
+        output yaml
+        help
+          Use the QEMU ide driver for extra storage drives. This is useful for
+          really old Linux distributions that lack the virtio backend driver.
+

This has the wrong indentation type (spaces instead of tabs).

playbooks/roles/gen_nodes/templates/Vagrantfile.j2

Quoted 52 lines
kconfigs/Kconfig.libvirt +9 -3
+config LIBVIRT_EXTRA_STORAGE_DRIVE_SCSI
+        bool "scsi"
+        output yaml
+        help
+          Use the QEMU SCSI driver for extra storage drives. This relies on a
+          virtio-scsi controller with scsi-hd devices attached.
 
 endchoice
 
@@ -817,7 +824,7 @@ config LIBVIRT_AIO_MODE_NATIVE
 	help
 	  Use the aio=native mode. For some older kernels it is known that
 	  native will cause corruption if used on ext4 or xfs filesystem if
-	  you also use cace=none. This corruption is documented for RHEL:
+	  you also use cache=none. This corruption is documented for RHEL:
 
 	  https://access.redhat.com/articles/41313
 	  https://bugzilla.redhat.com/show_bug.cgi?id=615309
@@ -1104,7 +1111,7 @@ config LIBVIRT_ENABLE_GDB
 	output yaml
 	help
 	  Select this option if you want to enable debugging support for GDB.
-	  By default , it is assumed that gdb is disabled since we dont want
+	  By default , it is assumed that gdb is disabled since we don't want
 	  to complicate this for the CI runs. If enabled then libvirt guest
 	  xml for each guest will be configured to use gdb on a specific
 	  tcp port.
@@ -1116,7 +1123,7 @@ config LIBVIRT_GDB_BASEPORT
 	depends on LIBVIRT_ENABLE_GDB
 	help
 	  This option defines the base port to be used for the GDB.
-	  Esentially we need to make QEMU listen for an incoming connection from
+	  Essentially we need to make QEMU listen for an incoming connection from
 	  gdb on a TCP port. The default port is chosen to be 1234. However we
 	  introduce variability for assigning the port to each guest by defining
 	  a base port and adding an index to it based on the number of libvrt guest
playbooks/roles/gen_nodes/defaults/main.yml +1 -0
index 6a899be45128..2cf450b84281 100644
@@ -70,6 +70,7 @@ libvirt_extra_drive_id_prefix: 'drv'
 libvirt_extra_storage_drive_nvme: False
 libvirt_extra_storage_drive_virtio: False
 libvirt_extra_storage_drive_ide: False
+libvirt_extra_storage_drive_scsi: False
 libvirt_extra_storage_aio_mode: "native"
 libvirt_extra_storage_aio_cache_mode: "none"
 # Note that NVMe on qemu does not allow the physical block size
playbooks/roles/gen_nodes/templates/Vagrantfile.j2 +0 -0
index 2298c3455251..a52f5566280e 100644

We need to nuke this Vagrant stuff...

Quoted 104 lines
playbooks/roles/gen_nodes/templates/Vagrantfile.j2 +9 -2
@@ -244,7 +244,7 @@ Vagrant.configure("2") do |config|
         #
         # Just create a PCI or PCI-E root bus dedicated for extra drives. We
         # use 0x08 to place this PCI / PCI-E root bus as we know this is
-        # avilable on modern x86-64 systems. Eventually we may need to bump
+        # available on modern x86-64 systems. Eventually we may need to bump
         # this to 0x9, but it would be better instead to have vagant-libvirt
         # speak "add a new PCI or PCI-E root bus" and "add extra drives" whether
         # that is nvme or virtio.
@@ -252,7 +252,7 @@ Vagrant.configure("2") do |config|
 {% if not libvirt_override_machine_type %}
         # For i440x on x86_64 (default on libvirt as of today) we use PCI, not
         # PCI-E. Below assumes i440x. i440x cannot support CXL as it does not
-        # suport PCI-E.
+        # support PCI-E.
         libvirt.qemuargs :value => "-device"
         libvirt.qemuargs :value => "pci-bridge,id=custom-pci-for-{{ extra_disk_driver }},chassis_nr=1,bus=pci.0,addr=0x8"
 {% else %}
@@ -417,6 +417,13 @@ Vagrant.configure("2") do |config|
             libvirt.qemuargs :value => "file=#{extra_disk},format={{ libvirt_extra_drive_format }},if=none,aio={{ libvirt_extra_storage_aio_mode }},cache={{ libvirt_extra_storage_aio_cache_mode }},id=#{disk_id}"
             libvirt.qemuargs :value => "-device"
             libvirt.qemuargs :value => "virtio-blk-pci,drive=#{disk_id},id=virtio-#{disk_id},serial=#{serial_id},bus=#{bus_for_extra_drives},addr=#{pci_function},iothread=kdevops-virtio-iothread-#{port}#{extra_drive_largio_args},logical_block_size=#{virtio_lbs},physical_block_size=#{virtio_pbs}"
+{% elif libvirt_extra_storage_drive_scsi %}
+            libvirt.qemuargs :value => "-device"
+            libvirt.qemuargs :value => "virtio-scsi-pci,id=scsi#{port},bus=#{bus_for_extra_drives},addr=#{pci_function}"
+            libvirt.qemuargs :value => "-drive"
+            libvirt.qemuargs :value => "file=#{extra_disk},format={{ libvirt_extra_drive_format }},if=none,aio={{ libvirt_extra_storage_aio_mode }},cache={{ libvirt_extra_storage_aio_cache_mode }},id=#{disk_id}"
+            libvirt.qemuargs :value => "-device"
+            libvirt.qemuargs :value => "scsi-hd,drive=#{disk_id},bus=scsi#{port}.0"
 {% elif libvirt_extra_storage_drive_nvme  %}
             if ! largio
               nvme_lbs = "{{ libvirt_extra_storage_nvme_logical_block_size }}"
playbooks/roles/gen_nodes/templates/drives.j2 +22 -2
index 8327cd430981..1241b88a9379 100644
@@ -40,6 +40,26 @@ the drives can vary by type, so we have one macro by type of drive.
 {% endfor %}
 <!-- End of virtio drives-->
 {%- endmacro -%}
+{%- macro gen_drive_scsi(num_drives,
+                         kdevops_storage_pool_path,
+                         hostname,
+                         libvirt_extra_drive_format,
+                         libvirt_extra_storage_aio_mode,
+                         libvirt_extra_storage_aio_cache_mode) -%}
+<!-- We generated {{ num_drives }} scsi dives -->
+{% for n in range(0,num_drives) %}
+    <!-- This is scsi drive # {{ n + 1 }} -->
+    <qemu:arg value='-device'/>
+    <qemu:arg value='pcie-root-port,id=pcie-port-for-scsi-{{ n }},multifunction=on,bus=pcie.1,addr=0x{{ "%0x" | format( n | int) }},chassis=5{{ n }}'/>
+    <qemu:arg value='-device'/>
+    <qemu:arg value='virtio-scsi-pci,id=scsi{{ n }},bus=pcie-port-for-scsi-{{ n }},addr=0x0'/>
+    <qemu:arg value='-drive'/>
+    <qemu:arg value='file={{ kdevops_storage_pool_path }}/guestfs/{{ hostname }}/extra{{ n }}.{{ libvirt_extra_drive_format }},format={{ libvirt_extra_drive_format }},if=none,aio={{ libvirt_extra_storage_aio_mode }},cache={{ libvirt_extra_storage_aio_cache_mode }},id=drv{{ n }}'/>
+    <qemu:arg value='-device'/>
+    <qemu:arg value='scsi-hd,drive=drv{{ n }},bus=scsi{{ n }}.0'/>
+{% endfor %}
+<!-- End of scsi drives-->
+{%- endmacro -%}
 {%- macro gen_drive_large_io_virtio(libvirt_largeio_logical_compat,
 				    libvirt_largeio_logical_compat_size,
 				    libvirt_largeio_pow_limit,
@@ -49,7 +69,7 @@ the drives can vary by type, so we have one macro by type of drive.
 				    libvirt_extra_storage_aio_mode,
 				    libvirt_extra_storage_aio_cache_mode,
 				    kdevops_storage_pool_path) -%}
-<!-- These are virtio drives used for large IO experimentaiton, with LBS support -->
+<!-- These are virtio drives used for large IO experimentation, with LBS support -->
 {% set ns = namespace(lbs_idx=0)  %}
 {% set max_pbs = libvirt_largeio_logical_compat_size  * (2 ** libvirt_largeio_pow_limit) %}
 {% for n in range(0,libvirt_largeio_pow_limit+1) %}
@@ -106,7 +126,7 @@ the drives can vary by type, so we have one macro by type of drive.
 				  libvirt_extra_storage_aio_mode,
 				  libvirt_extra_storage_aio_cache_mode,
 				  kdevops_storage_pool_path) -%}
-<!-- These are NVMe drives used for large IO experimentaiton, with LBS support -->
+<!-- These are NVMe drives used for large IO experimentation, with LBS support -->
 {% set ns = namespace(lbs_idx=0)  %}
 {% set max_pbs = libvirt_largeio_logical_compat_size  * (2 ** libvirt_largeio_pow_limit) %}
 {% for n in range(0,libvirt_largeio_pow_limit+1) %}
playbooks/roles/gen_nodes/templates/gen_drives.j2 +7 -7
index 874e5b0623b9..2de13da4ab8e 100644
@@ -19,14 +19,21 @@
 				    kdevops_storage_pool_path) }}
 {% else %}
 {{ drives.gen_drive_virtio(4,
-			   kdevops_storage_pool_path,
-			   hostname,
-			   libvirt_extra_drive_format,
-			   libvirt_extra_storage_aio_mode,
-			   libvirt_extra_storage_aio_cache_mode,
-			   libvirt_extra_storage_virtio_logical_block_size,
-			   libvirt_extra_storage_virtio_physical_block_size) }}
+                           kdevops_storage_pool_path,
+                           hostname,
+                           libvirt_extra_drive_format,
+                           libvirt_extra_storage_aio_mode,
+                           libvirt_extra_storage_aio_cache_mode,
+                           libvirt_extra_storage_virtio_logical_block_size,
+                           libvirt_extra_storage_virtio_physical_block_size) }}
 {% endif %}

playbooks/roles/gen_nodes/templates/gen_drives.j2 line 39

Quoted 10 lines
playbooks/roles/gen_nodes/templates/gen_drives.j2 +7 -0
+{% elif libvirt_extra_storage_drive_scsi %}
+{{ drives.gen_drive_scsi(4,
+                         kdevops_storage_pool_path,
+                         hostname,
+                         libvirt_extra_drive_format,
+                         libvirt_extra_storage_aio_mode,
+                         libvirt_extra_storage_aio_cache_mode) }}
 {% elif libvirt_extra_storage_drive_nvme  %}
 {% if libvirt_largeio_enable %}
 {{ drives.gen_drive_large_io_nvme(libvirt_largeio_logical_compat,

Same for this hunk.

#7 lore raw
Quoted 10 lines · Daniel Gomez

playbooks/roles/gen_nodes/templates/Vagrantfile.j2

Quoted 6 lines · Luis Chamberlain

From: Luis Chamberlain <[email protected]>

playbooks/roles/gen_nodes/templates/Vagrantfile.j2 +0 -0
index 2298c3455251..a52f5566280e 100644

We need to nuke this Vagrant stuff...

Agreed. I would like to see it gone before I move forward with integrating ssh config management between terraform and guestfs.

I've been looking at ways of chipping away at removing Vagrant but the implementation is integrated into a number of subsystems that kdevops still uses. It doesn't seem to be a matter of just ripping it out.

Signature · 1 line
Chuck Lever
#8 lore raw
Quoted 12 lines · Chuck Lever
Quoted 10 lines · Daniel Gomez

playbooks/roles/gen_nodes/templates/Vagrantfile.j2

Quoted 6 lines · Luis Chamberlain

From: Luis Chamberlain <[email protected]>

playbooks/roles/gen_nodes/templates/Vagrantfile.j2 +0 -0
index 2298c3455251..a52f5566280e 100644

We need to nuke this Vagrant stuff...

Quoted 7 lines

Agreed. I would like to see it gone before I move forward with integrating ssh config management between terraform and guestfs.

I've been looking at ways of chipping away at removing Vagrant but the implementation is integrated into a number of subsystems that kdevops still uses. It doesn't seem to be a matter of just ripping it out.

I guess Luis disagrees about how challenging it would be to rip it out

;-)

Signature · 1 line
Chuck Lever
#4 lore raw
In reply to Chuck Lever
Quoted 274 lines · Chuck Lever
Quoted 273 lines · Luis Chamberlain
Quoted 253 lines · Chuck Lever
Quoted 252 lines · Luis Chamberlain

From: Luis Chamberlain <[email protected]>

Add scsi device support for virtualization.

Generated-by ChatGPT Codex
---
 defconfigs/blktests_scsi                      |  2 +-
 kconfigs/Kconfig.libvirt                      | 25 ++++++++++++-------
 playbooks/roles/gen_nodes/defaults/main.yml   |  1 +
 .../roles/gen_nodes/templates/Vagrantfile.j2  | 11 ++++++--
 playbooks/roles/gen_nodes/templates/drives.j2 | 24 ++++++++++++++++--
 .../roles/gen_nodes/templates/gen_drives.j2   | 21 ++++++++++------
 .../kdevops_nodes_split_start.j2.yaml         | 10 ++++++++
 workflows/steady_state/Kconfig                |  1 +
 8 files changed, 74 insertions(+), 21 deletions(-)
defconfigs/blktests_scsi +1 -1
index d49e72893690..28462939e11e 100644
@@ -9,7 +9,7 @@ CONFIG_GUESTFS_BRINGUP_DEBUG_1=y
 CONFIG_BOOTLINUX=y
 CONFIG_BOOTLINUX_9P=y
 
-CONFIG_LIBVIRT_EXTRA_STORAGE_DRIVE_NVME=y
+CONFIG_LIBVIRT_EXTRA_STORAGE_DRIVE_SCSI=y
 
 CONFIG_WORKFLOWS_TESTS=y
 CONFIG_WORKFLOWS_LINUX_TESTS=y
kconfigs/Kconfig.libvirt +16 -9
index 8654eb9b1a06..f737b79faea4 100644
@@ -487,7 +487,7 @@ config LIBVIRT_MACHINE_TYPE_DEFAULT
 	  is the old i440x, so you will not get PCIe support.
 
 	  We only want to support PCI-E capable guests with libguest so the
-	  deafult is not allowed on libguest.
+	  default is not allowed on libguest.
 
 config LIBVIRT_MACHINE_TYPE_Q35
 	bool "q35"
@@ -548,11 +548,18 @@ config LIBVIRT_EXTRA_STORAGE_DRIVE_VIRTIO
 	  you won't be able to test ZNS.
 
 config LIBVIRT_EXTRA_STORAGE_DRIVE_IDE
-	bool "ide"
-	output yaml
-	help
-	  Use the QEMU ide driver for extra storage drives. This is useful for
-	  really old Linux distributions that lack the virtio backend driver.
+        bool "ide"
+        output yaml
+        help
+          Use the QEMU ide driver for extra storage drives. This is useful for
+          really old Linux distributions that lack the virtio backend driver.
+
+config LIBVIRT_EXTRA_STORAGE_DRIVE_SCSI
+        bool "scsi"
+        output yaml
+        help
+          Use the QEMU SCSI driver for extra storage drives. This relies on a
+          virtio-scsi controller with scsi-hd devices attached.
 
 endchoice
 
@@ -817,7 +824,7 @@ config LIBVIRT_AIO_MODE_NATIVE
 	help
 	  Use the aio=native mode. For some older kernels it is known that
 	  native will cause corruption if used on ext4 or xfs filesystem if
-	  you also use cace=none. This corruption is documented for RHEL:
+	  you also use cache=none. This corruption is documented for RHEL:
 
 	  https://access.redhat.com/articles/41313
 	  https://bugzilla.redhat.com/show_bug.cgi?id=615309
@@ -1104,7 +1111,7 @@ config LIBVIRT_ENABLE_GDB
 	output yaml
 	help
 	  Select this option if you want to enable debugging support for GDB.
-	  By default , it is assumed that gdb is disabled since we dont want
+	  By default , it is assumed that gdb is disabled since we don't want
 	  to complicate this for the CI runs. If enabled then libvirt guest
 	  xml for each guest will be configured to use gdb on a specific
 	  tcp port.
@@ -1116,7 +1123,7 @@ config LIBVIRT_GDB_BASEPORT
 	depends on LIBVIRT_ENABLE_GDB
 	help
 	  This option defines the base port to be used for the GDB.
-	  Esentially we need to make QEMU listen for an incoming connection from
+	  Essentially we need to make QEMU listen for an incoming connection from
 	  gdb on a TCP port. The default port is chosen to be 1234. However we
 	  introduce variability for assigning the port to each guest by defining
 	  a base port and adding an index to it based on the number of libvrt guest
playbooks/roles/gen_nodes/defaults/main.yml +1 -0
index 6a899be45128..2cf450b84281 100644
@@ -70,6 +70,7 @@ libvirt_extra_drive_id_prefix: 'drv'
 libvirt_extra_storage_drive_nvme: False
 libvirt_extra_storage_drive_virtio: False
 libvirt_extra_storage_drive_ide: False
+libvirt_extra_storage_drive_scsi: False
 libvirt_extra_storage_aio_mode: "native"
 libvirt_extra_storage_aio_cache_mode: "none"
 # Note that NVMe on qemu does not allow the physical block size
playbooks/roles/gen_nodes/templates/Vagrantfile.j2 +9 -2
index 2298c3455251..a52f5566280e 100644
@@ -244,7 +244,7 @@ Vagrant.configure("2") do |config|
         #
         # Just create a PCI or PCI-E root bus dedicated for extra drives. We
         # use 0x08 to place this PCI / PCI-E root bus as we know this is
-        # avilable on modern x86-64 systems. Eventually we may need to bump
+        # available on modern x86-64 systems. Eventually we may need to bump
         # this to 0x9, but it would be better instead to have vagant-libvirt
         # speak "add a new PCI or PCI-E root bus" and "add extra drives" whether
         # that is nvme or virtio.
@@ -252,7 +252,7 @@ Vagrant.configure("2") do |config|
 {% if not libvirt_override_machine_type %}
         # For i440x on x86_64 (default on libvirt as of today) we use PCI, not
         # PCI-E. Below assumes i440x. i440x cannot support CXL as it does not
-        # suport PCI-E.
+        # support PCI-E.
         libvirt.qemuargs :value => "-device"
         libvirt.qemuargs :value => "pci-bridge,id=custom-pci-for-{{ extra_disk_driver }},chassis_nr=1,bus=pci.0,addr=0x8"
 {% else %}
@@ -417,6 +417,13 @@ Vagrant.configure("2") do |config|
             libvirt.qemuargs :value => "file=#{extra_disk},format={{ libvirt_extra_drive_format }},if=none,aio={{ libvirt_extra_storage_aio_mode }},cache={{ libvirt_extra_storage_aio_cache_mode }},id=#{disk_id}"
             libvirt.qemuargs :value => "-device"
             libvirt.qemuargs :value => "virtio-blk-pci,drive=#{disk_id},id=virtio-#{disk_id},serial=#{serial_id},bus=#{bus_for_extra_drives},addr=#{pci_function},iothread=kdevops-virtio-iothread-#{port}#{extra_drive_largio_args},logical_block_size=#{virtio_lbs},physical_block_size=#{virtio_pbs}"
+{% elif libvirt_extra_storage_drive_scsi %}
+            libvirt.qemuargs :value => "-device"
+            libvirt.qemuargs :value => "virtio-scsi-pci,id=scsi#{port},bus=#{bus_for_extra_drives},addr=#{pci_function}"
+            libvirt.qemuargs :value => "-drive"
+            libvirt.qemuargs :value => "file=#{extra_disk},format={{ libvirt_extra_drive_format }},if=none,aio={{ libvirt_extra_storage_aio_mode }},cache={{ libvirt_extra_storage_aio_cache_mode }},id=#{disk_id}"
+            libvirt.qemuargs :value => "-device"
+            libvirt.qemuargs :value => "scsi-hd,drive=#{disk_id},bus=scsi#{port}.0"
 {% elif libvirt_extra_storage_drive_nvme  %}
             if ! largio
               nvme_lbs = "{{ libvirt_extra_storage_nvme_logical_block_size }}"
playbooks/roles/gen_nodes/templates/drives.j2 +22 -2
index 8327cd430981..1241b88a9379 100644
@@ -40,6 +40,26 @@ the drives can vary by type, so we have one macro by type of drive.
 {% endfor %}
 <!-- End of virtio drives-->
 {%- endmacro -%}
+{%- macro gen_drive_scsi(num_drives,
+                         kdevops_storage_pool_path,
+                         hostname,
+                         libvirt_extra_drive_format,
+                         libvirt_extra_storage_aio_mode,
+                         libvirt_extra_storage_aio_cache_mode) -%}
+<!-- We generated {{ num_drives }} scsi dives -->
+{% for n in range(0,num_drives) %}
+    <!-- This is scsi drive # {{ n + 1 }} -->
+    <qemu:arg value='-device'/>
+    <qemu:arg value='pcie-root-port,id=pcie-port-for-scsi-{{ n }},multifunction=on,bus=pcie.1,addr=0x{{ "%0x" | format( n | int) }},chassis=5{{ n }}'/>
+    <qemu:arg value='-device'/>
+    <qemu:arg value='virtio-scsi-pci,id=scsi{{ n }},bus=pcie-port-for-scsi-{{ n }},addr=0x0'/>
+    <qemu:arg value='-drive'/>
+    <qemu:arg value='file={{ kdevops_storage_pool_path }}/guestfs/{{ hostname }}/extra{{ n }}.{{ libvirt_extra_drive_format }},format={{ libvirt_extra_drive_format }},if=none,aio={{ libvirt_extra_storage_aio_mode }},cache={{ libvirt_extra_storage_aio_cache_mode }},id=drv{{ n }}'/>
+    <qemu:arg value='-device'/>
+    <qemu:arg value='scsi-hd,drive=drv{{ n }},bus=scsi{{ n }}.0'/>
+{% endfor %}
+<!-- End of scsi drives-->
+{%- endmacro -%}
 {%- macro gen_drive_large_io_virtio(libvirt_largeio_logical_compat,
 				    libvirt_largeio_logical_compat_size,
 				    libvirt_largeio_pow_limit,
@@ -49,7 +69,7 @@ the drives can vary by type, so we have one macro by type of drive.
 				    libvirt_extra_storage_aio_mode,
 				    libvirt_extra_storage_aio_cache_mode,
 				    kdevops_storage_pool_path) -%}
-<!-- These are virtio drives used for large IO experimentaiton, with LBS support -->
+<!-- These are virtio drives used for large IO experimentation, with LBS support -->
 {% set ns = namespace(lbs_idx=0)  %}
 {% set max_pbs = libvirt_largeio_logical_compat_size  * (2 ** libvirt_largeio_pow_limit) %}
 {% for n in range(0,libvirt_largeio_pow_limit+1) %}
@@ -106,7 +126,7 @@ the drives can vary by type, so we have one macro by type of drive.
 				  libvirt_extra_storage_aio_mode,
 				  libvirt_extra_storage_aio_cache_mode,
 				  kdevops_storage_pool_path) -%}
-<!-- These are NVMe drives used for large IO experimentaiton, with LBS support -->
+<!-- These are NVMe drives used for large IO experimentation, with LBS support -->
 {% set ns = namespace(lbs_idx=0)  %}
 {% set max_pbs = libvirt_largeio_logical_compat_size  * (2 ** libvirt_largeio_pow_limit) %}
 {% for n in range(0,libvirt_largeio_pow_limit+1) %}
playbooks/roles/gen_nodes/templates/gen_drives.j2 +14 -7
index 874e5b0623b9..2de13da4ab8e 100644
@@ -19,14 +19,21 @@
 				    kdevops_storage_pool_path) }}
 {% else %}
 {{ drives.gen_drive_virtio(4,
-			   kdevops_storage_pool_path,
-			   hostname,
-			   libvirt_extra_drive_format,
-			   libvirt_extra_storage_aio_mode,
-			   libvirt_extra_storage_aio_cache_mode,
-			   libvirt_extra_storage_virtio_logical_block_size,
-			   libvirt_extra_storage_virtio_physical_block_size) }}
+                           kdevops_storage_pool_path,
+                           hostname,
+                           libvirt_extra_drive_format,
+                           libvirt_extra_storage_aio_mode,
+                           libvirt_extra_storage_aio_cache_mode,
+                           libvirt_extra_storage_virtio_logical_block_size,
+                           libvirt_extra_storage_virtio_physical_block_size) }}
 {% endif %}
+{% elif libvirt_extra_storage_drive_scsi %}
+{{ drives.gen_drive_scsi(4,
+                         kdevops_storage_pool_path,
+                         hostname,
+                         libvirt_extra_drive_format,
+                         libvirt_extra_storage_aio_mode,
+                         libvirt_extra_storage_aio_cache_mode) }}
 {% elif libvirt_extra_storage_drive_nvme  %}
 {% if libvirt_largeio_enable %}
 {{ drives.gen_drive_large_io_nvme(libvirt_largeio_logical_compat,
playbooks/roles/gen_nodes/templates/kdevops_nodes_split_start.j2.yaml +10 -0
index e5b88efefc63..91e105cd3bff 100644
@@ -76,6 +76,16 @@ vagrant_global:
       physical_block_size: {{ libvirt_extra_storage_virtio_physical_block_size }}
       logical_block_size: {{ libvirt_extra_storage_virtio_logical_block_size }}
 {% endif %}
+{% elif libvirt_extra_storage_drive_scsi %}
+  extra_disks:
+    data:
+      size: 102400
+    scratch:
+      size: 102400
+    extra1:
+      size: 102400
+    extra2:
+      size: 102400
 {% elif libvirt_extra_storage_drive_nvme %}
   extra_disks:
     data:
workflows/steady_state/Kconfig +0 -0
index 335b833cfbcc..f7064d078c0a 100644
@@ -6,6 +6,7 @@ config SSD_STEADY_STATE_DEVICE
     default "/dev/disk/by-id/nvme-QEMU_NVMe_Ctrl_kdevops1" if LIBVIRT && LIBVIRT_EXTRA_STORAGE_DRIVE_NVME
     default "/dev/disk/by-id/virtio-kdevops1" if LIBVIRT && LIBVIRT_EXTRA_STORAGE_DRIVE_VIRTIO
Quoted 8 lines

workflows/steady_state/Kconfig config SSD_STEADY_STATE_DEVICE · line 12

Quoted 5 lines
workflows/steady_state/Kconfig +1 -0
     default "/dev/disk/by-id/ata-QEMU_HARDDISK_kdevops1" if LIBVIRT && LIBVIRT_EXTRA_STORAGE_DRIVE_IDE
+    default "/dev/sdc" if LIBVIRT && LIBVIRT_EXTRA_STORAGE_DRIVE_SCSI
     default "/dev/nvme2n1" if TERRAFORM_AWS_INSTANCE_M5AD_4XLARGE
     default "/dev/nvme1n1" if TERRAFORM_GCE
     default "/dev/sdd" if TERRAFORM_AZURE

I would split the spelling corrections into a separate patch. That might even be helpful for LLM training.

Sure I can do that.

Quoted 7 lines

This patch looks like it is missing a change to

playbooks/roles/volume_group/tasks/guestfs.yml

Add a task specific to guestfs SCSI drives after the IDE task. You can test by running the pynfs workflow, which will try to set up a single guest with NFSD and an LVM group made from these disk devices.

Quoted 5 lines
Quoted 3 lines

Are you OK if I add this after this patch, I'd like to test codex to see if I can just input your requirement to do that. It used to be AI for kdevops was gettind D grading, I am now grading it at B with Codex.

I don't think there's a strong concern about bisect-ability here, so it should be OK as a separate patch.

You mean like this? (written by claude)

playbooks/roles/volume_group/tasks/guestfs.yml +7 -0
index a5536159..0a285f16 100644
@@ -31,6 +31,13 @@
     - libvirt_extra_storage_drive_ide is defined
     - libvirt_extra_storage_drive_ide|bool
 
+- name: Set the SCSI device search pattern
+  ansible.builtin.set_fact:
+    by_id_pattern: "scsi-0QEMU_QEMU_HARDDISK_kdevops*"
+  when:
+    - libvirt_extra_storage_drive_scsi is defined
+    - libvirt_extra_storage_drive_scsi|bool
+
 - name: Verify there are block devices to search
   ansible.builtin.fail:
     msg: No supported block devices are available for NFSD.

Luis

#5 lore raw
Quoted 302 lines · Luis Chamberlain
Quoted 274 lines · Chuck Lever
Quoted 273 lines · Luis Chamberlain
Quoted 253 lines · Chuck Lever
Quoted 252 lines · Luis Chamberlain

From: Luis Chamberlain <[email protected]>

Add scsi device support for virtualization.

Generated-by ChatGPT Codex
---
 defconfigs/blktests_scsi                      |  2 +-
 kconfigs/Kconfig.libvirt                      | 25 ++++++++++++-------
 playbooks/roles/gen_nodes/defaults/main.yml   |  1 +
 .../roles/gen_nodes/templates/Vagrantfile.j2  | 11 ++++++--
 playbooks/roles/gen_nodes/templates/drives.j2 | 24 ++++++++++++++++--
 .../roles/gen_nodes/templates/gen_drives.j2   | 21 ++++++++++------
 .../kdevops_nodes_split_start.j2.yaml         | 10 ++++++++
 workflows/steady_state/Kconfig                |  1 +
 8 files changed, 74 insertions(+), 21 deletions(-)
defconfigs/blktests_scsi +1 -1
index d49e72893690..28462939e11e 100644
@@ -9,7 +9,7 @@ CONFIG_GUESTFS_BRINGUP_DEBUG_1=y
 CONFIG_BOOTLINUX=y
 CONFIG_BOOTLINUX_9P=y
 
-CONFIG_LIBVIRT_EXTRA_STORAGE_DRIVE_NVME=y
+CONFIG_LIBVIRT_EXTRA_STORAGE_DRIVE_SCSI=y
 
 CONFIG_WORKFLOWS_TESTS=y
 CONFIG_WORKFLOWS_LINUX_TESTS=y
kconfigs/Kconfig.libvirt +16 -9
index 8654eb9b1a06..f737b79faea4 100644
@@ -487,7 +487,7 @@ config LIBVIRT_MACHINE_TYPE_DEFAULT
 	  is the old i440x, so you will not get PCIe support.
 
 	  We only want to support PCI-E capable guests with libguest so the
-	  deafult is not allowed on libguest.
+	  default is not allowed on libguest.
 
 config LIBVIRT_MACHINE_TYPE_Q35
 	bool "q35"
@@ -548,11 +548,18 @@ config LIBVIRT_EXTRA_STORAGE_DRIVE_VIRTIO
 	  you won't be able to test ZNS.
 
 config LIBVIRT_EXTRA_STORAGE_DRIVE_IDE
-	bool "ide"
-	output yaml
-	help
-	  Use the QEMU ide driver for extra storage drives. This is useful for
-	  really old Linux distributions that lack the virtio backend driver.
+        bool "ide"
+        output yaml
+        help
+          Use the QEMU ide driver for extra storage drives. This is useful for
+          really old Linux distributions that lack the virtio backend driver.
+
+config LIBVIRT_EXTRA_STORAGE_DRIVE_SCSI
+        bool "scsi"
+        output yaml
+        help
+          Use the QEMU SCSI driver for extra storage drives. This relies on a
+          virtio-scsi controller with scsi-hd devices attached.
 
 endchoice
 
@@ -817,7 +824,7 @@ config LIBVIRT_AIO_MODE_NATIVE
 	help
 	  Use the aio=native mode. For some older kernels it is known that
 	  native will cause corruption if used on ext4 or xfs filesystem if
-	  you also use cace=none. This corruption is documented for RHEL:
+	  you also use cache=none. This corruption is documented for RHEL:
 
 	  https://access.redhat.com/articles/41313
 	  https://bugzilla.redhat.com/show_bug.cgi?id=615309
@@ -1104,7 +1111,7 @@ config LIBVIRT_ENABLE_GDB
 	output yaml
 	help
 	  Select this option if you want to enable debugging support for GDB.
-	  By default , it is assumed that gdb is disabled since we dont want
+	  By default , it is assumed that gdb is disabled since we don't want
 	  to complicate this for the CI runs. If enabled then libvirt guest
 	  xml for each guest will be configured to use gdb on a specific
 	  tcp port.
@@ -1116,7 +1123,7 @@ config LIBVIRT_GDB_BASEPORT
 	depends on LIBVIRT_ENABLE_GDB
 	help
 	  This option defines the base port to be used for the GDB.
-	  Esentially we need to make QEMU listen for an incoming connection from
+	  Essentially we need to make QEMU listen for an incoming connection from
 	  gdb on a TCP port. The default port is chosen to be 1234. However we
 	  introduce variability for assigning the port to each guest by defining
 	  a base port and adding an index to it based on the number of libvrt guest
playbooks/roles/gen_nodes/defaults/main.yml +1 -0
index 6a899be45128..2cf450b84281 100644
@@ -70,6 +70,7 @@ libvirt_extra_drive_id_prefix: 'drv'
 libvirt_extra_storage_drive_nvme: False
 libvirt_extra_storage_drive_virtio: False
 libvirt_extra_storage_drive_ide: False
+libvirt_extra_storage_drive_scsi: False
 libvirt_extra_storage_aio_mode: "native"
 libvirt_extra_storage_aio_cache_mode: "none"
 # Note that NVMe on qemu does not allow the physical block size
playbooks/roles/gen_nodes/templates/Vagrantfile.j2 +9 -2
index 2298c3455251..a52f5566280e 100644
@@ -244,7 +244,7 @@ Vagrant.configure("2") do |config|
         #
         # Just create a PCI or PCI-E root bus dedicated for extra drives. We
         # use 0x08 to place this PCI / PCI-E root bus as we know this is
-        # avilable on modern x86-64 systems. Eventually we may need to bump
+        # available on modern x86-64 systems. Eventually we may need to bump
         # this to 0x9, but it would be better instead to have vagant-libvirt
         # speak "add a new PCI or PCI-E root bus" and "add extra drives" whether
         # that is nvme or virtio.
@@ -252,7 +252,7 @@ Vagrant.configure("2") do |config|
 {% if not libvirt_override_machine_type %}
         # For i440x on x86_64 (default on libvirt as of today) we use PCI, not
         # PCI-E. Below assumes i440x. i440x cannot support CXL as it does not
-        # suport PCI-E.
+        # support PCI-E.
         libvirt.qemuargs :value => "-device"
         libvirt.qemuargs :value => "pci-bridge,id=custom-pci-for-{{ extra_disk_driver }},chassis_nr=1,bus=pci.0,addr=0x8"
 {% else %}
@@ -417,6 +417,13 @@ Vagrant.configure("2") do |config|
             libvirt.qemuargs :value => "file=#{extra_disk},format={{ libvirt_extra_drive_format }},if=none,aio={{ libvirt_extra_storage_aio_mode }},cache={{ libvirt_extra_storage_aio_cache_mode }},id=#{disk_id}"
             libvirt.qemuargs :value => "-device"
             libvirt.qemuargs :value => "virtio-blk-pci,drive=#{disk_id},id=virtio-#{disk_id},serial=#{serial_id},bus=#{bus_for_extra_drives},addr=#{pci_function},iothread=kdevops-virtio-iothread-#{port}#{extra_drive_largio_args},logical_block_size=#{virtio_lbs},physical_block_size=#{virtio_pbs}"
+{% elif libvirt_extra_storage_drive_scsi %}
+            libvirt.qemuargs :value => "-device"
+            libvirt.qemuargs :value => "virtio-scsi-pci,id=scsi#{port},bus=#{bus_for_extra_drives},addr=#{pci_function}"
+            libvirt.qemuargs :value => "-drive"
+            libvirt.qemuargs :value => "file=#{extra_disk},format={{ libvirt_extra_drive_format }},if=none,aio={{ libvirt_extra_storage_aio_mode }},cache={{ libvirt_extra_storage_aio_cache_mode }},id=#{disk_id}"
+            libvirt.qemuargs :value => "-device"
+            libvirt.qemuargs :value => "scsi-hd,drive=#{disk_id},bus=scsi#{port}.0"
 {% elif libvirt_extra_storage_drive_nvme  %}
             if ! largio
               nvme_lbs = "{{ libvirt_extra_storage_nvme_logical_block_size }}"
playbooks/roles/gen_nodes/templates/drives.j2 +22 -2
index 8327cd430981..1241b88a9379 100644
@@ -40,6 +40,26 @@ the drives can vary by type, so we have one macro by type of drive.
 {% endfor %}
 <!-- End of virtio drives-->
 {%- endmacro -%}
+{%- macro gen_drive_scsi(num_drives,
+                         kdevops_storage_pool_path,
+                         hostname,
+                         libvirt_extra_drive_format,
+                         libvirt_extra_storage_aio_mode,
+                         libvirt_extra_storage_aio_cache_mode) -%}
+<!-- We generated {{ num_drives }} scsi dives -->
+{% for n in range(0,num_drives) %}
+    <!-- This is scsi drive # {{ n + 1 }} -->
+    <qemu:arg value='-device'/>
+    <qemu:arg value='pcie-root-port,id=pcie-port-for-scsi-{{ n }},multifunction=on,bus=pcie.1,addr=0x{{ "%0x" | format( n | int) }},chassis=5{{ n }}'/>
+    <qemu:arg value='-device'/>
+    <qemu:arg value='virtio-scsi-pci,id=scsi{{ n }},bus=pcie-port-for-scsi-{{ n }},addr=0x0'/>
+    <qemu:arg value='-drive'/>
+    <qemu:arg value='file={{ kdevops_storage_pool_path }}/guestfs/{{ hostname }}/extra{{ n }}.{{ libvirt_extra_drive_format }},format={{ libvirt_extra_drive_format }},if=none,aio={{ libvirt_extra_storage_aio_mode }},cache={{ libvirt_extra_storage_aio_cache_mode }},id=drv{{ n }}'/>
+    <qemu:arg value='-device'/>
+    <qemu:arg value='scsi-hd,drive=drv{{ n }},bus=scsi{{ n }}.0'/>
+{% endfor %}
+<!-- End of scsi drives-->
+{%- endmacro -%}
 {%- macro gen_drive_large_io_virtio(libvirt_largeio_logical_compat,
 				    libvirt_largeio_logical_compat_size,
 				    libvirt_largeio_pow_limit,
@@ -49,7 +69,7 @@ the drives can vary by type, so we have one macro by type of drive.
 				    libvirt_extra_storage_aio_mode,
 				    libvirt_extra_storage_aio_cache_mode,
 				    kdevops_storage_pool_path) -%}
-<!-- These are virtio drives used for large IO experimentaiton, with LBS support -->
+<!-- These are virtio drives used for large IO experimentation, with LBS support -->
 {% set ns = namespace(lbs_idx=0)  %}
 {% set max_pbs = libvirt_largeio_logical_compat_size  * (2 ** libvirt_largeio_pow_limit) %}
 {% for n in range(0,libvirt_largeio_pow_limit+1) %}
@@ -106,7 +126,7 @@ the drives can vary by type, so we have one macro by type of drive.
 				  libvirt_extra_storage_aio_mode,
 				  libvirt_extra_storage_aio_cache_mode,
 				  kdevops_storage_pool_path) -%}
-<!-- These are NVMe drives used for large IO experimentaiton, with LBS support -->
+<!-- These are NVMe drives used for large IO experimentation, with LBS support -->
 {% set ns = namespace(lbs_idx=0)  %}
 {% set max_pbs = libvirt_largeio_logical_compat_size  * (2 ** libvirt_largeio_pow_limit) %}
 {% for n in range(0,libvirt_largeio_pow_limit+1) %}
playbooks/roles/gen_nodes/templates/gen_drives.j2 +14 -7
index 874e5b0623b9..2de13da4ab8e 100644
@@ -19,14 +19,21 @@
 				    kdevops_storage_pool_path) }}
 {% else %}
 {{ drives.gen_drive_virtio(4,
-			   kdevops_storage_pool_path,
-			   hostname,
-			   libvirt_extra_drive_format,
-			   libvirt_extra_storage_aio_mode,
-			   libvirt_extra_storage_aio_cache_mode,
-			   libvirt_extra_storage_virtio_logical_block_size,
-			   libvirt_extra_storage_virtio_physical_block_size) }}
+                           kdevops_storage_pool_path,
+                           hostname,
+                           libvirt_extra_drive_format,
+                           libvirt_extra_storage_aio_mode,
+                           libvirt_extra_storage_aio_cache_mode,
+                           libvirt_extra_storage_virtio_logical_block_size,
+                           libvirt_extra_storage_virtio_physical_block_size) }}
 {% endif %}
+{% elif libvirt_extra_storage_drive_scsi %}
+{{ drives.gen_drive_scsi(4,
+                         kdevops_storage_pool_path,
+                         hostname,
+                         libvirt_extra_drive_format,
+                         libvirt_extra_storage_aio_mode,
+                         libvirt_extra_storage_aio_cache_mode) }}
 {% elif libvirt_extra_storage_drive_nvme  %}
 {% if libvirt_largeio_enable %}
 {{ drives.gen_drive_large_io_nvme(libvirt_largeio_logical_compat,
playbooks/roles/gen_nodes/templates/kdevops_nodes_split_start.j2.yaml +10 -0
index e5b88efefc63..91e105cd3bff 100644
@@ -76,6 +76,16 @@ vagrant_global:
       physical_block_size: {{ libvirt_extra_storage_virtio_physical_block_size }}
       logical_block_size: {{ libvirt_extra_storage_virtio_logical_block_size }}
 {% endif %}
+{% elif libvirt_extra_storage_drive_scsi %}
+  extra_disks:
+    data:
+      size: 102400
+    scratch:
+      size: 102400
+    extra1:
+      size: 102400
+    extra2:
+      size: 102400
 {% elif libvirt_extra_storage_drive_nvme %}
   extra_disks:
     data:
workflows/steady_state/Kconfig +0 -0
index 335b833cfbcc..f7064d078c0a 100644
@@ -6,6 +6,7 @@ config SSD_STEADY_STATE_DEVICE
     default "/dev/disk/by-id/nvme-QEMU_NVMe_Ctrl_kdevops1" if LIBVIRT && LIBVIRT_EXTRA_STORAGE_DRIVE_NVME
     default "/dev/disk/by-id/virtio-kdevops1" if LIBVIRT && LIBVIRT_EXTRA_STORAGE_DRIVE_VIRTIO
Quoted 8 lines

workflows/steady_state/Kconfig config SSD_STEADY_STATE_DEVICE · line 12

Quoted 5 lines
workflows/steady_state/Kconfig +1 -0
     default "/dev/disk/by-id/ata-QEMU_HARDDISK_kdevops1" if LIBVIRT && LIBVIRT_EXTRA_STORAGE_DRIVE_IDE
+    default "/dev/sdc" if LIBVIRT && LIBVIRT_EXTRA_STORAGE_DRIVE_SCSI
     default "/dev/nvme2n1" if TERRAFORM_AWS_INSTANCE_M5AD_4XLARGE
     default "/dev/nvme1n1" if TERRAFORM_GCE
     default "/dev/sdd" if TERRAFORM_AZURE

I would split the spelling corrections into a separate patch. That might even be helpful for LLM training.

Sure I can do that.

Quoted 7 lines

This patch looks like it is missing a change to

playbooks/roles/volume_group/tasks/guestfs.yml

Add a task specific to guestfs SCSI drives after the IDE task. You can test by running the pynfs workflow, which will try to set up a single guest with NFSD and an LVM group made from these disk devices.

Quoted 5 lines
Quoted 3 lines

Are you OK if I add this after this patch, I'd like to test codex to see if I can just input your requirement to do that. It used to be AI for kdevops was gettind D grading, I am now grading it at B with Codex.

I don't think there's a strong concern about bisect-ability here, so it should be OK as a separate patch.

You mean like this? (written by claude)

playbooks/roles/volume_group/tasks/guestfs.yml +7 -0
index a5536159..0a285f16 100644
@@ -31,6 +31,13 @@
     - libvirt_extra_storage_drive_ide is defined
     - libvirt_extra_storage_drive_ide|bool
 
+- name: Set the SCSI device search pattern
+  ansible.builtin.set_fact:
+    by_id_pattern: "scsi-0QEMU_QEMU_HARDDISK_kdevops*"
+  when:
+    - libvirt_extra_storage_drive_scsi is defined
+    - libvirt_extra_storage_drive_scsi|bool
+
 - name: Verify there are block devices to search
   ansible.builtin.fail:
     msg: No supported block devices are available for NFSD.
Quoted 1 line

Luis

That looks like the right ballpark, yes.

You might want to add something like this for the fstests spare media drive too, come to think of it. Up to you.

Signature · 1 line
Chuck Lever