Skip to contentSkip to conversation

x86: nSVM: Fix exit_info_2 check error of npt_rw_pfwalk_check()

PATCH In review Qiang Ma 2 participants 2 messages Jul 14, 2025 – Nov 18, 2025 KVM

lore
Share & tools
lore

Qiang Ma

author
#0 lore raw

PATCH 1/1 x86: nSVM: Fix exit_info_2 check error of npt_rw_pfwalk_check()

The testcase log:

kvm-unit-tests]# TESTNAME=svm_npt TIMEOUT=90s MACHINE= ACCEL= ./x86/run x86/svm_npt.flat -smp 2 -cpu max,+svm -m 4g
...
enabling apic
smp: waiting for 1 APs
enabling apic
setup: CPU 1 online
paging enabled
cr0 = 80010011
cr3 = 10bf000
cr4 = 20
NPT detected - running all tests with NPT enabled
PASS: npt_nx
PASS: npt_np
PASS: npt_us
PASS: npt_rw
npt_rw_pfwalk_check: CR3: 10bf000 EXIT_INFO_2: 10bf5f8
FAIL: npt_rw_pfwalk
...

CR4=0x20, PAE is enabled, CR3 is PDPT base address, aligned on a 32-byte boundary, looking at the above test results, it is still 4k alignment in reality, exit_info_2 in vmcb stores the falut address of GPA.

So, after aligning the GPA to PAGE_SIZE, compare the CR3 and GPA.

PAE Paging (CR4.PAE=1)—This field is 27 bits and occupies bits 31:5. The CR3 register points to the base address of the page-directory-pointer table. The page-directory-pointer table is aligned on a 32-byte boundary, with the low 5 address bits 4:0 assumed to be 0.

Table C-1. SVM Intercept Codes (continued):
Code Name Cause
400h VMEXIT_NPF EXITINFO2 contains the guest physical address causing the fault.

This is described in the AMD64 Architecture Programmers Manual Volume 2, Order Number 24593.

---
 x86/svm_npt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
x86/svm_npt.c +1 -1
index bd5e8f35..08614d84 100644
@@ -132,7 +132,7 @@ static bool npt_rw_pfwalk_check(struct svm_test *test)
 
 	return (vmcb->control.exit_code == SVM_EXIT_NPF)
 	    && (vmcb->control.exit_info_1 == 0x200000007ULL)
-	    && (vmcb->control.exit_info_2 == read_cr3());
+	    && ((vmcb->control.exit_info_2 & PAGE_MASK) == read_cr3());
 }
 
 static bool was_x2apic;
Signature · 1 line
2.20.1
#1 lore raw
Quoted 21 lines · Qiang Ma

The testcase log:

kvm-unit-tests]# TESTNAME=svm_npt TIMEOUT=90s MACHINE= ACCEL= ./x86/run x86/svm_npt.flat -smp 2 -cpu max,+svm -m 4g
...
enabling apic
smp: waiting for 1 APs
enabling apic
setup: CPU 1 online
paging enabled
cr0 = 80010011
cr3 = 10bf000
cr4 = 20
NPT detected - running all tests with NPT enabled
PASS: npt_nx
PASS: npt_np
PASS: npt_us
PASS: npt_rw
npt_rw_pfwalk_check: CR3: 10bf000 EXIT_INFO_2: 10bf5f8
FAIL: npt_rw_pfwalk
...

Quoted 2 lines

CR4=0x20, PAE is enabled, CR3 is PDPT base address, aligned on a 32-byte boundary, looking at the above test results, it is still 4k alignment in reality,

No, the nested SVM tests only support 64-bit mode. I.e. they're using 64-bit paging, not PAE paging.

Can you provide instructions on how to repro the failure? This could be an actual KVM bug (or maybe a test bug?), and masking the reported GPA will paper over such a bug.

Quoted 37 lines

exit_info_2 in vmcb stores the falut address of GPA.

So, after aligning the GPA to PAGE_SIZE, compare the CR3 and GPA.

PAE Paging (CR4.PAE=1)—This field is 27 bits and occupies bits 31:5. The CR3 register points to the base address of the page-directory-pointer table. The page-directory-pointer table is aligned on a 32-byte boundary, with the low 5 address bits 4:0 assumed to be 0.

Table C-1. SVM Intercept Codes (continued):
Code Name Cause
400h VMEXIT_NPF EXITINFO2 contains the guest physical address causing the fault.

This is described in the AMD64 Architecture Programmers Manual Volume 2, Order Number 24593.

---
 x86/svm_npt.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
x86/svm_npt.c +1 -1
index bd5e8f35..08614d84 100644
@@ -132,7 +132,7 @@ static bool npt_rw_pfwalk_check(struct svm_test *test)
 
 	return (vmcb->control.exit_code == SVM_EXIT_NPF)
 	    && (vmcb->control.exit_info_1 == 0x200000007ULL)
-	    && (vmcb->control.exit_info_2 == read_cr3());
+	    && ((vmcb->control.exit_info_2 & PAGE_MASK) == read_cr3());
 }
 
 static bool was_x2apic;
Signature · 1 line
2.20.1