Skip to contentSkip to conversation

dt-bindings: gpio: Convert lacie,netxbig-gpio-ext to DT schema

PATCH Applied Rob Herring (Arm) 2 participants 2 messages Jul 14, 2025 – Jul 18, 2025

Subsystems (2)
Device tree bindings GPIO
lore
Share & tools
lore

Rob Herring (Arm)

author maintainer
#0 lore raw

PATCH 1/1 dt-bindings: gpio: Convert lacie,netxbig-gpio-ext to DT schema

Convert the Lacie NetxBig GPIO binding to DT schema format. It's a straight forward conversion.

Signed-off-by Rob Herring (Arm) <[email protected]>
---
 .../bindings/gpio/lacie,netxbig-gpio-ext.yaml | 60 +++++++++++++++++++
 .../bindings/gpio/netxbig-gpio-ext.txt        | 22 -------
 2 files changed, 60 insertions(+), 22 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/gpio/lacie,netxbig-gpio-ext.yaml
 delete mode 100644 Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt
Documentation/devicetree/bindings/gpio/lacie,netxbig-gpio-ext.yaml new file +60 -0
new file mode 100644
index 000000000000..42021ee14125
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/lacie,netxbig-gpio-ext.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NetxBig GPIO extension bus
+
+maintainers:
+  - Simon Guinot <[email protected]>
+
+description: >
+  GPIO extension bus found on some LaCie/Seagate boards
+  (Example: 2Big/5Big Network v2, 2Big NAS).
+
+properties:
+  compatible:
+    items:
+      - const: lacie,netxbig-gpio-ext
+
+  addr-gpios:
+    description: GPIOs representing the address register (LSB->MSB).
+    items:
+      - description: bit 0 (LSB)
+      - description: bit 1
+      - description: bit 2 (MSB)
+
+  data-gpios:
+    description: GPIOs representing the data register (LSB->MSB).
+    items:
+      - description: bit 0 (LSB)
+      - description: bit 1
+      - description: bit 2 (MSB)
+
+  enable-gpio:
+    description: Latches the new configuration (address, data) on raising edge.
+    maxItems: 1
+
+required:
+  - compatible
+  - addr-gpios
+  - data-gpios
+  - enable-gpio
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    gpio {
+        compatible = "lacie,netxbig-gpio-ext";
+        addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH
+                      &gpio1 16 GPIO_ACTIVE_HIGH
+                      &gpio1 17 GPIO_ACTIVE_HIGH>;
+        data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH
+                      &gpio1 13 GPIO_ACTIVE_HIGH
+                      &gpio1 14 GPIO_ACTIVE_HIGH>;
+        enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+    };
Documentation/devicetree/bindings/gpio/netxbig-gpio-ext.txt deleted +0 -22
deleted file mode 100644
index 50ec2e690701..000000000000
@@ -1,22 +0,0 @@
-Binding for the GPIO extension bus found on some LaCie/Seagate boards
-(Example: 2Big/5Big Network v2, 2Big NAS).
-
-Required properties:
-- compatible: "lacie,netxbig-gpio-ext".
-- addr-gpios: GPIOs representing the address register (LSB -> MSB).
-- data-gpios: GPIOs representing the data register (LSB -> MSB).
-- enable-gpio: latches the new configuration (address, data) on raising edge.
-
-Example:
-
-netxbig_gpio_ext: netxbig-gpio-ext {
-	compatible = "lacie,netxbig-gpio-ext";
-
-	addr-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH
-		      &gpio1 16 GPIO_ACTIVE_HIGH
-		      &gpio1 17 GPIO_ACTIVE_HIGH>;
-	data-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH
-		      &gpio1 13 GPIO_ACTIVE_HIGH
-		      &gpio1 14 GPIO_ACTIVE_HIGH>;
-	enable-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-};
Signature · 1 line
2.47.2