dt-bindings: gpio: Convert cirrus,clps711x-mctrl-gpio to DT schema
Subsystems (2)
Rob Herring (Arm)
maintainerPATCH 1/1 dt-bindings: gpio: Convert cirrus,clps711x-mctrl-gpio to DT schema
Convert the cirrus,clps711x-mctrl-gpio binding to DT schema format. Add the missing "gpio,syscon-dev" phandle property.
Signed-off-by Rob Herring (Arm) <[email protected]>
--- .../gpio/cirrus,clps711x-mctrl-gpio.txt | 17 ------- .../gpio/cirrus,clps711x-mctrl-gpio.yaml | 49 +++++++++++++++++++ 2 files changed, 49 insertions(+), 17 deletions(-) delete mode 100644 Documentation/devicetree/bindings/gpio/cirrus,clps711x-mctrl-gpio.txt create mode 100644 Documentation/devicetree/bindings/gpio/cirrus,clps711x-mctrl-gpio.yaml
Documentation/devicetree/bindings/gpio/cirrus,clps711x-mctrl-gpio.txt deleted +0 -17
@@ -1,17 +0,0 @@ -* ARM Cirrus Logic CLPS711X SYSFLG1 MCTRL GPIOs - -Required properties: -- compatible: Should contain "cirrus,ep7209-mctrl-gpio". -- gpio-controller: Marks the device node as a gpio controller. -- #gpio-cells: Should be two. The first cell is the pin number and - the second cell is used to specify the gpio polarity: - 0 = Active high, - 1 = Active low. - -Example: - sysgpio: sysgpio { - compatible = "cirrus,ep7312-mctrl-gpio", - "cirrus,ep7209-mctrl-gpio"; - gpio-controller; - #gpio-cells = <2>; - };
Documentation/devicetree/bindings/gpio/cirrus,clps711x-mctrl-gpio.yaml new file +49 -0
49 lines not on this page · raw message
Signature · 1 line
2.47.2
Bartosz Golaszewski
AppliedFrom: Bartosz Golaszewski <[email protected]>
Quoted 4 lines · Rob Herring (Arm)
Convert the cirrus,clps711x-mctrl-gpio binding to DT schema format. Add the missing "gpio,syscon-dev" phandle property.
Applied, thanks!
[1/1] dt-bindings: gpio: Convert cirrus,clps711x-mctrl-gpio to DT schema
https://git.kernel.org/brgl/linux/c/7aee14a170a07bf6481f65e6a36a835e6414917e
Best regards,
Signature · 1 line
Bartosz Golaszewski <[email protected]>