pinctrl: Tighten some pinctrl driver dependencies
Subsystems (2)
PATCH 1/1 pinctrl: Tighten some pinctrl driver dependencies
A few pinctrl drivers cannot build without access to some platform specific header files. Express those requirements in Kconfig as well.
Signed-off-by Tom Rini <[email protected]>
--- drivers/pinctrl/Kconfig | 7 ++++--- drivers/pinctrl/tegra/Kconfig | 4 ++-- 2 files changed, 6 insertions(+), 5 deletions(-)
drivers/pinctrl/Kconfig +4 -3
@@ -197,7 +197,7 @@ config PINCTRL_AR933X config PINCTRL_AT91 bool "AT91 pinctrl driver" - depends on DM + depends on DM && ARCH_AT91 help This option is to enable the AT91 pinctrl driver for AT91 PIO controller.
@@ -213,13 +213,14 @@ config PINCTRL_AT91 config PINCTRL_AT91PIO4 bool "AT91 PIO4 pinctrl driver" - depends on DM + depends on DM && ARCH_AT91 help This option is to enable the AT91 pinctrl driver for AT91 PIO4 controller which is available on SAMA5D2 SoC. config PINCTRL_INTEL bool "Standard Intel pin-control and pin-mux driver" + depends on X86 help Recent Intel chips such as Apollo Lake (APL) use a common pin control and GPIO scheme. The settings for this come from an SoC-specific
@@ -248,7 +249,7 @@ config PINCTRL_QCA953X config PINCTRL_QE bool "QE based pinctrl driver, like on mpc83xx" - depends on DM + depends on DM && MPC83xx help This option is to enable the QE pinctrl driver for QE based io controller.
drivers/pinctrl/tegra/Kconfig +2 -2
@@ -2,7 +2,7 @@ config PINCTRL_TEGRA bool "Nvidia Tegra pinctrl driver" - depends on DM + depends on DM && ARCH_TEGRA help Support pin multiplexing control on Nvidia Tegra SoCs. The driver is an overlay to existing driver and allows
@@ -11,7 +11,7 @@ config PINCTRL_TEGRA config SPL_PINCTRL_TEGRA bool "Nvidia Tegra SPL pinctrl driver" - depends on SPL_PINCTRL + depends on SPL_PINCTRL && ARCH_TEGRA help Enables support of pre-DM version of pin multiplexing control driver used on SPL stage for board setup and
Signature · 1 line
2.43.0
Quoted 4 lines · Tom Rini
A few pinctrl drivers cannot build without access to some platform specific header files. Express those requirements in
Kconfigas well.
Applied to u-boot/next, thanks!
[1/1] pinctrl: Tighten some pinctrl driver dependencies
commit: e7a95ee2b575d7f0f44da3b3aeb951508eac1511
Signature · 1 line
Tom