Skip to contentSkip to conversation

dt-bindings: clock: Convert silabs,si514/544 to DT schema

PATCH Applied Rob Herring (Arm) 3 participants 3 messages Aug 4, 2025 – Aug 13, 2025

Subsystems (2)
Device tree bindings Common clk
lore
Share & tools
lore

Rob Herring (Arm)

author maintainer
#0 lore raw

PATCH 1/1 dt-bindings: clock: Convert silabs,si514/544 to DT schema

Convert the Silicon Labs SI514 and SI544 bindings to DT schema format. Combine the bindings into a single schema as they are the same.

Signed-off-by Rob Herring (Arm) <[email protected]>
---
 .../bindings/clock/silabs,si514.txt           | 24 ---------
 .../bindings/clock/silabs,si544.txt           | 25 ---------
 .../bindings/clock/silabs,si544.yaml          | 54 +++++++++++++++++++
 3 files changed, 54 insertions(+), 49 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/clock/silabs,si514.txt
 delete mode 100644 Documentation/devicetree/bindings/clock/silabs,si544.txt
 create mode 100644 Documentation/devicetree/bindings/clock/silabs,si544.yaml
Documentation/devicetree/bindings/clock/silabs,si514.txt deleted +0 -24
deleted file mode 100644
index a4f28ec86f35..000000000000
@@ -1,24 +0,0 @@
-Binding for Silicon Labs 514 programmable I2C clock generator.
-
-Reference
-This binding uses the common clock binding[1]. Details about the device can be
-found in the datasheet[2].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Si514 datasheet
-    https://www.silabs.com/Support%20Documents/TechnicalDocs/si514.pdf
-
-Required properties:
- - compatible: Shall be "silabs,si514"
- - reg: I2C device address.
- - #clock-cells: From common clock bindings: Shall be 0.
-
-Optional properties:
- - clock-output-names: From common clock bindings. Recommended to be "si514".
-
-Example:
-	si514: clock-generator@55 {
-		reg = <0x55>;
-		#clock-cells = <0>;
-		compatible = "silabs,si514";
-	};
Documentation/devicetree/bindings/clock/silabs,si544.txt deleted +0 -25
deleted file mode 100644
index b86535b80920..000000000000
@@ -1,25 +0,0 @@
-Binding for Silicon Labs 544 programmable I2C clock generator.
-
-Reference
-This binding uses the common clock binding[1]. Details about the device can be
-found in the datasheet[2].
-
-[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
-[2] Si544 datasheet
-    https://www.silabs.com/documents/public/data-sheets/si544-datasheet.pdf
-
-Required properties:
- - compatible: One of "silabs,si514a", "silabs,si514b" "silabs,si514c" according
-               to the speed grade of the chip.
- - reg: I2C device address.
- - #clock-cells: From common clock bindings: Shall be 0.
-
-Optional properties:
- - clock-output-names: From common clock bindings. Recommended to be "si544".
-
-Example:
-	si544: clock-controller@55 {
-		reg = <0x55>;
-		#clock-cells = <0>;
-		compatible = "silabs,si544b";
-	};
Documentation/devicetree/bindings/clock/silabs,si544.yaml new file +54 -0

54 lines not on this page · raw message

Signature · 1 line
2.47.2
Reviewed-by on v1 1/1
#1 lore raw
Quoted 8 lines · Rob Herring (Arm)

Convert the Silicon Labs SI514 and SI544 bindings to DT schema format. Combine the bindings into a single schema as they are the same.

Signed-off-by Rob Herring (Arm) <[email protected]>
---
 .../bindings/clock/silabs,si514.txt           | 24 ---------
 .../bindings/clock/silabs,si544.txt           | 25 ---------
 .../bindings/clock/silabs,si544.yaml          | 54 +++++++++++++++++++
Reviewed-by Krzysztof Kozlowski <[email protected]>

Best regards,
Krzysztof