dt-bindings: usb: Drop duplicate nvidia,tegra20-ehci.txt
Subsystems (3)
Rob Herring (Arm)
maintainerPATCH 1/1 dt-bindings: usb: Drop duplicate nvidia,tegra20-ehci.txt
The nvidia,tegra20-ehci binding is already documented in ci-hdrc-usb2.yaml, so drop the old text binding.
Signed-off-by Rob Herring (Arm) <[email protected]>
--- .../bindings/usb/nvidia,tegra20-ehci.txt | 23 ------------------- 1 file changed, 23 deletions(-) delete mode 100644 Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt
Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt deleted +0 -23
@@ -1,23 +0,0 @@ -Tegra SOC USB controllers - -The device node for a USB controller that is part of a Tegra -SOC is as described in the document "Open Firmware Recommended -Practice : Universal Serial Bus" with the following modifications -and additions : - -Required properties : - - compatible : For Tegra20, must contain "nvidia,tegra20-ehci". - For Tegra30, must contain "nvidia,tegra30-ehci". Otherwise, must contain - "nvidia,<chip>-ehci" plus at least one of the above, where <chip> is - tegra114, tegra124, tegra132, or tegra210. - - nvidia,phy : phandle of the PHY that the controller is connected to. - - clocks : Must contain one entry, for the module clock. - See ../clocks/clock-bindings.txt for details. - - resets : Must contain an entry for each entry in reset-names. - See ../reset/reset.txt for details. - - reset-names : Must include the following entries: - - usb - -Optional properties: - - nvidia,needs-double-reset : boolean is to be set for some of the Tegra20 - USB ports, which need reset twice due to hardware issues.
Signature · 1 line
2.47.2
Quoted 4 lines · Rob Herring (Arm)
The nvidia,tegra20-ehci binding is already documented in
ci-hdrc-usb2.yaml, so drop the old text binding.Signed-off-by Rob Herring (Arm) <[email protected]>
Acked-by Conor Dooley <[email protected]>