regulator: dt-bindings: Clean-up active-semi,act8945a duplication

deleted file mode 100644
index 5ca75d888b4a..000000000000
@@ -1,82 +0,0 @@
-Device-Tree bindings for Active-semi ACT8945A MFD driver
-
-Required properties:
- - compatible: "active-semi,act8945a".
- - reg: the I2C slave address for the ACT8945A chip
-
-The chip exposes two subdevices:
- - a regulators: see ../regulator/act8945a-regulator.txt
- - a charger: see ../power/act8945a-charger.txt
-
-Example:
-	pmic@5b {
-		compatible = "active-semi,act8945a";
-		reg = <0x5b>;
-
-		active-semi,vsel-high;
-
-		regulators {
-			vdd_1v35_reg: REG_DCDC1 {
-				regulator-name = "VDD_1V35";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-			};
-
-			vdd_1v2_reg: REG_DCDC2 {
-				regulator-name = "VDD_1V2";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-			};
-
-			vdd_3v3_reg: REG_DCDC3 {
-				regulator-name = "VDD_3V3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_fuse_reg: REG_LDO1 {
-				regulator-name = "VDD_FUSE";
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-always-on;
-			};
-
-			vdd_3v3_lp_reg: REG_LDO2 {
-				regulator-name = "VDD_3V3_LP";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_led_reg: REG_LDO3 {
-				regulator-name = "VDD_LED";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_sdhc_1v8_reg: REG_LDO4 {
-				regulator-name = "VDD_SDHC_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-		};
-
-		charger {
-			compatible = "active-semi,act8945a-charger";
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
-			interrupt-parent = <&pioA>;
-			interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
-
-			active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
-			active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
-			active-semi,input-voltage-threshold-microvolt = <6600>;
-			active-semi,precondition-timeout = <40>;
-			active-semi,total-timeout = <3>;
-		};
-	};

76 lines not on this page · raw message

index bdf3f7d34ef5..a8d579844dc7 100644
@@ -91,28 +91,41 @@ properties:
         maxItems: 1
 
       active-semi,chglev-gpios:
-        description: CGHLEV GPIO
+        description: charge current level GPIO
         maxItems: 1
 
       active-semi,lbo-gpios:
-        description: LBO GPIO
+        description: low battery voltage detect GPIO
         maxItems: 1
 
       active-semi,input-voltage-threshold-microvolt:
-        description: Input voltage threshold
-        maxItems: 1
+        description:
+          Specifies the charger's input over-voltage threshold value. Despite
+          the name, specified values are in millivolt (mV).
+        enum: [ 6600, 7000, 7500, 8000 ]
+        default: 6600
 
       active-semi,precondition-timeout:
-        description: Precondition timeout
+        description:
+          Specifies the charger's PRECONDITION safety timer setting value in
+          minutes. If 0, it means to disable this timer.
+        enum: [ 0, 40, 60, 80 ]
+        default: 40
         $ref: /schemas/types.yaml#/definitions/uint32
 
       active-semi,total-timeout:
-        description: Total timeout
+        description:
+          Specifies the charger's total safety timer setting value in hours; If
+          0, it means to disable this timer;
+        enum: [ 0, 3, 4, 5 ]
+        default: 3
         $ref: /schemas/types.yaml#/definitions/uint32
 
     required:
       - compatible
       - interrupts
+      - active-semi,chglev-gpios
+      - active-semi,lbo-gpios
 
 additionalProperties: false