Skip to contentSkip to conversation

FAILED: patch "[PATCH] block: Make REQ_OP_ZONE_FINISH a write operation" failed to apply to 6.1-stable tree

PATCH New [email protected] 2 participants 3 messages Aug 15, 2025 – Aug 16, 2025

Subsystems (2)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 6.1-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.1.y
git checkout FETCH_HEAD
git cherry-pick -x 3f66ccbaaef3a0c5bd844eab04e3207b4061c546
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2025081543-myself-easiest-be00@gregkh' --subject-prefix 'PATCH 6.1.y' HEAD^..

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 3f66ccbaaef3a0c5bd844eab04e3207b4061c546 Mon Sep 17 00:00:00 2001
From: Damien Le Moal <[email protected]>
Date: Wed, 25 Jun 2025 18:33:23 +0900
Subject: [PATCH] block: Make REQ_OP_ZONE_FINISH a write operation

REQ_OP_ZONE_FINISH is defined as "12", which makes op_is_write(REQ_OP_ZONE_FINISH) return false, despite the fact that a zone finish operation is an operation that modifies a zone (transition it to full) and so should be considered as a write operation (albeit one that does not transfer any data to the device).

Fix this by redefining REQ_OP_ZONE_FINISH to be an odd number (13), and redefine REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL using sequential odd numbers from that new value.

include/linux/blk_types.h +3 -3
index 3d1577f07c1c..930daff207df 100644
@@ -350,11 +350,11 @@ enum req_op {
 	/* Close a zone */
 	REQ_OP_ZONE_CLOSE	= (__force blk_opf_t)11,
 	/* Transition a zone to full */
-	REQ_OP_ZONE_FINISH	= (__force blk_opf_t)12,
+	REQ_OP_ZONE_FINISH	= (__force blk_opf_t)13,
 	/* reset a zone write pointer */
-	REQ_OP_ZONE_RESET	= (__force blk_opf_t)13,
+	REQ_OP_ZONE_RESET	= (__force blk_opf_t)15,
 	/* reset all the zone present on the device */
-	REQ_OP_ZONE_RESET_ALL	= (__force blk_opf_t)15,
+	REQ_OP_ZONE_RESET_ALL	= (__force blk_opf_t)17,
 
 	/* Driver private requests */
 	REQ_OP_DRV_IN		= (__force blk_opf_t)34,
maintainer
#1 lore raw

PATCH 1/2 block: reject invalid operation in submit_bio_noacct

From: Christoph Hellwig <[email protected]>

[ Upstream commit 1c042f8d4bc342b7985b1de3d76836f1a1083b65 ]

submit_bio_noacct allows completely invalid operations, or operations that are not supported in the bio path. Extent the existing switch statement to rejcect all invalid types.

Move the code point for REQ_OP_ZONE_APPEND so that it's not right in the middle of the zone management operations and the switch statement can follow the numerical order of the operations.

Stable-dep-of: 3f66ccbaaef3 ("block: Make REQ_OP_ZONE_FINISH a write operation")

---
 block/blk-core.c          | 26 +++++++++++++++++++++-----
 include/linux/blk_types.h |  8 ++++----
 2 files changed, 25 insertions(+), 9 deletions(-)
block/blk-core.c +21 -5
index 94941e3ce219..25b4733f25d3 100644
@@ -755,6 +755,15 @@ void submit_bio_noacct(struct bio *bio)
 		bio_clear_polled(bio);
 
 	switch (bio_op(bio)) {
+	case REQ_OP_READ:
+	case REQ_OP_WRITE:
+		break;
+	case REQ_OP_FLUSH:
+		/*
+		 * REQ_OP_FLUSH can't be submitted through bios, it is only
+		 * synthetized in struct request by the flush state machine.
+		 */
+		goto not_supported;
 	case REQ_OP_DISCARD:
 		if (!bdev_max_discard_sectors(bdev))
 			goto not_supported;
@@ -768,6 +777,10 @@ void submit_bio_noacct(struct bio *bio)
 		if (status != BLK_STS_OK)
 			goto end_io;
 		break;
+	case REQ_OP_WRITE_ZEROES:
+		if (!q->limits.max_write_zeroes_sectors)
+			goto not_supported;
+		break;
 	case REQ_OP_ZONE_RESET:
 	case REQ_OP_ZONE_OPEN:
 	case REQ_OP_ZONE_CLOSE:
@@ -779,12 +792,15 @@ void submit_bio_noacct(struct bio *bio)
 		if (!bdev_is_zoned(bio->bi_bdev) || !blk_queue_zone_resetall(q))
 			goto not_supported;
 		break;
-	case REQ_OP_WRITE_ZEROES:
-		if (!q->limits.max_write_zeroes_sectors)
-			goto not_supported;
-		break;
+	case REQ_OP_DRV_IN:
+	case REQ_OP_DRV_OUT:
+		/*
+		 * Driver private operations are only used with passthrough
+		 * requests.
+		 */
+		fallthrough;
 	default:
-		break;
+		goto not_supported;
 	}
 
 	if (blk_throtl_bio(bio))
include/linux/blk_types.h +4 -4
index e0b098089ef2..03e570e0e5c2 100644
@@ -366,6 +366,8 @@ enum req_op {
 	REQ_OP_DISCARD		= (__force blk_opf_t)3,
 	/* securely erase sectors */
 	REQ_OP_SECURE_ERASE	= (__force blk_opf_t)5,
+	/* write data at the current zone write pointer */
+	REQ_OP_ZONE_APPEND	= (__force blk_opf_t)7,
 	/* write the zero filled sector many times */
 	REQ_OP_WRITE_ZEROES	= (__force blk_opf_t)9,
 	/* Open a zone */
@@ -374,12 +376,10 @@ enum req_op {
 	REQ_OP_ZONE_CLOSE	= (__force blk_opf_t)11,
 	/* Transition a zone to full */
 	REQ_OP_ZONE_FINISH	= (__force blk_opf_t)12,
-	/* write data at the current zone write pointer */
-	REQ_OP_ZONE_APPEND	= (__force blk_opf_t)13,
 	/* reset a zone write pointer */
-	REQ_OP_ZONE_RESET	= (__force blk_opf_t)15,
+	REQ_OP_ZONE_RESET	= (__force blk_opf_t)13,
 	/* reset all the zone present on the device */
-	REQ_OP_ZONE_RESET_ALL	= (__force blk_opf_t)17,
+	REQ_OP_ZONE_RESET_ALL	= (__force blk_opf_t)15,
 
 	/* Driver private requests */
 	REQ_OP_DRV_IN		= (__force blk_opf_t)34,
Signature · 1 line
2.50.1
maintainer
#2 lore raw

PATCH 2/2 block: Make REQ_OP_ZONE_FINISH a write operation

From: Damien Le Moal <[email protected]>

[ Upstream commit 3f66ccbaaef3a0c5bd844eab04e3207b4061c546 ]

REQ_OP_ZONE_FINISH is defined as "12", which makes op_is_write(REQ_OP_ZONE_FINISH) return false, despite the fact that a zone finish operation is an operation that modifies a zone (transition it to full) and so should be considered as a write operation (albeit one that does not transfer any data to the device).

Fix this by redefining REQ_OP_ZONE_FINISH to be an odd number (13), and redefine REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL using sequential odd numbers from that new value.

---
 include/linux/blk_types.h | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
include/linux/blk_types.h +3 -3
index 03e570e0e5c2..7e84f414a166 100644
@@ -375,11 +375,11 @@ enum req_op {
 	/* Close a zone */
 	REQ_OP_ZONE_CLOSE	= (__force blk_opf_t)11,
 	/* Transition a zone to full */
-	REQ_OP_ZONE_FINISH	= (__force blk_opf_t)12,
+	REQ_OP_ZONE_FINISH	= (__force blk_opf_t)13,
 	/* reset a zone write pointer */
-	REQ_OP_ZONE_RESET	= (__force blk_opf_t)13,
+	REQ_OP_ZONE_RESET	= (__force blk_opf_t)15,
 	/* reset all the zone present on the device */
-	REQ_OP_ZONE_RESET_ALL	= (__force blk_opf_t)15,
+	REQ_OP_ZONE_RESET_ALL	= (__force blk_opf_t)17,
 
 	/* Driver private requests */
 	REQ_OP_DRV_IN		= (__force blk_opf_t)34,
Signature · 1 line
2.50.1