Consolidate Poly1305 code and add RISC-V optimization

PATCH Superseded Eric Biggers 1 participant 5 messages Aug 16, 2025 – Aug 21, 2025

Subsystems (3)

RISC-V Crypto API Crypto library

lore

Share & tools

lore

Eric Biggers

author maintainer

2025-08-16 19:47 UTC #0 lore raw

cover Consolidate Poly1305 code and add RISC-V optimization

This series is targeting libcrypto-next. It can also be retrieved from:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux.git poly1305-v1

This series simplifies and optimizes the organization of the Poly1305 code by consolidating it into a single module. This follows the example of SHA-1, SHA-256, SHA-512, CRC32, etc.

Since the RISC-V Poly1305 patch has had a moving target, I also rebased it on top of this series and included it as patch 3.

Eric Biggers (2):
lib/crypto: poly1305: Remove unused function

    poly1305_is_arch_optimized()

lib/crypto: poly1305: Consolidate into single module

Zhihang Shao (1):
lib/crypto: riscv/poly1305: Import OpenSSL/CRYPTOGAMS implementation

 crypto/Kconfig                                |   2 +
 include/crypto/internal/poly1305.h            |  16 +-
 include/crypto/poly1305.h                     |   9 -
 lib/crypto/Kconfig                            |  53 +-
 lib/crypto/Makefile                           |  69 +-
 lib/crypto/arm/Kconfig                        |   5 -
 lib/crypto/arm/Makefile                       |  18 -
 lib/crypto/arm/poly1305-armv4.pl              |   3 +-
 lib/crypto/arm/poly1305-glue.c                |  76 --
 lib/crypto/arm/poly1305.h                     |  53 ++
 lib/crypto/arm64/Kconfig                      |   6 -
 lib/crypto/arm64/Makefile                     |  13 -
 lib/crypto/arm64/poly1305-armv8.pl            |   3 +
 lib/crypto/arm64/poly1305-glue.c              |  74 --
 lib/crypto/arm64/poly1305.h                   |  50 ++
 lib/crypto/mips/Kconfig                       |   5 -
 lib/crypto/mips/Makefile                      |  14 -
 lib/crypto/mips/poly1305-glue.c               |  33 -
 lib/crypto/mips/poly1305-mips.pl              |   8 +-
 lib/crypto/mips/poly1305.h                    |  14 +
 lib/crypto/poly1305-generic.c                 |  25 -
 lib/crypto/poly1305.c                         |  81 +-
 lib/crypto/powerpc/Kconfig                    |   8 -
 lib/crypto/powerpc/Makefile                   |   3 -
 .../{poly1305-p10-glue.c => poly1305.h}       |  40 +-
 lib/crypto/riscv/poly1305-riscv.pl            | 847 ++++++++++++++++++
 lib/crypto/riscv/poly1305.h                   |  14 +
 lib/crypto/x86/Kconfig                        |   6 -
 lib/crypto/x86/Makefile                       |  10 -
 lib/crypto/x86/poly1305-x86_64-cryptogams.pl  |  33 +-
 .../x86/{poly1305_glue.c => poly1305.h}       |  47 +-
 31 files changed, 1172 insertions(+), 466 deletions(-)
 delete mode 100644 lib/crypto/arm/poly1305-glue.c
 create mode 100644 lib/crypto/arm/poly1305.h
 delete mode 100644 lib/crypto/arm64/poly1305-glue.c
 create mode 100644 lib/crypto/arm64/poly1305.h
 delete mode 100644 lib/crypto/mips/poly1305-glue.c
 create mode 100644 lib/crypto/mips/poly1305.h
 delete mode 100644 lib/crypto/poly1305-generic.c
 rename lib/crypto/powerpc/{poly1305-p10-glue.c => poly1305.h} (63%)
 create mode 100644 lib/crypto/riscv/poly1305-riscv.pl
 create mode 100644 lib/crypto/riscv/poly1305.h
 rename lib/crypto/x86/{poly1305_glue.c => poly1305.h} (83%)

base-commit: 56784a42208677e6fb24ba0bd93a2ea0bd9f41ff

Signature · 1 line

2.50.1

Eric Biggers

author maintainer

2025-08-16 19:47 UTC #1 lore raw

PATCH 1/3 lib/crypto: poly1305: Remove unused function poly1305_is_arch_optimized()

poly1305_is_arch_optimized() is unused, so remove it.

Signed-off-by Eric Biggers <[email protected]>

---
 include/crypto/poly1305.h              | 9 ---------
 lib/crypto/arm/poly1305-glue.c         | 7 -------
 lib/crypto/arm64/poly1305-glue.c       | 7 -------
 lib/crypto/mips/poly1305-glue.c        | 6 ------
 lib/crypto/powerpc/poly1305-p10-glue.c | 6 ------
 lib/crypto/x86/poly1305_glue.c         | 6 ------
 6 files changed, 41 deletions(-)

include/crypto/poly1305.h +0 -9

index e54abda8cfe95..d4daeec8da19d 100644
@@ -62,15 +62,6 @@ void poly1305_init(struct poly1305_desc_ctx *desc,
 		   const u8 key[POLY1305_KEY_SIZE]);
 void poly1305_update(struct poly1305_desc_ctx *desc,
 		     const u8 *src, unsigned int nbytes);
 void poly1305_final(struct poly1305_desc_ctx *desc, u8 *digest);
 
-#if IS_ENABLED(CONFIG_CRYPTO_ARCH_HAVE_LIB_POLY1305)
-bool poly1305_is_arch_optimized(void);
-#else
-static inline bool poly1305_is_arch_optimized(void)
-{
-	return false;
-}
-#endif
-
 #endif

lib/crypto/arm/poly1305-glue.c +0 -7

index 2d86c78af8837..9e513e319e37c 100644
@@ -49,17 +49,10 @@ void poly1305_blocks_arch(struct poly1305_block_state *state, const u8 *src,
 	} else
 		poly1305_blocks_arm(state, src, len, padbit);
 }
 EXPORT_SYMBOL_GPL(poly1305_blocks_arch);
 
-bool poly1305_is_arch_optimized(void)
-{
-	/* We always can use at least the ARM scalar implementation. */
-	return true;
-}
-EXPORT_SYMBOL(poly1305_is_arch_optimized);
-
 static int __init arm_poly1305_mod_init(void)
 {
 	if (IS_ENABLED(CONFIG_KERNEL_MODE_NEON) &&
 	    (elf_hwcap & HWCAP_NEON))
 		static_branch_enable(&have_neon);

lib/crypto/arm64/poly1305-glue.c +0 -7

index 31aea21ce42f7..d4a522e7d25a9 100644
@@ -48,17 +48,10 @@ void poly1305_blocks_arch(struct poly1305_block_state *state, const u8 *src,
 	} else
 		poly1305_blocks(state, src, len, padbit);
 }
 EXPORT_SYMBOL_GPL(poly1305_blocks_arch);
 
-bool poly1305_is_arch_optimized(void)
-{
-	/* We always can use at least the ARM64 scalar implementation. */
-	return true;
-}
-EXPORT_SYMBOL(poly1305_is_arch_optimized);
-
 static int __init neon_poly1305_mod_init(void)
 {
 	if (cpu_have_named_feature(ASIMD))
 		static_branch_enable(&have_neon);
 	return 0;

lib/crypto/mips/poly1305-glue.c +0 -6

index 764a38a652002..002f50f710aba 100644
@@ -21,13 +21,7 @@ EXPORT_SYMBOL_GPL(poly1305_blocks_arch);
 asmlinkage void poly1305_emit_arch(const struct poly1305_state *state,
 				   u8 digest[POLY1305_DIGEST_SIZE],
 				   const u32 nonce[4]);
 EXPORT_SYMBOL_GPL(poly1305_emit_arch);
 
-bool poly1305_is_arch_optimized(void)
-{
-	return true;
-}
-EXPORT_SYMBOL(poly1305_is_arch_optimized);
-
 MODULE_DESCRIPTION("Poly1305 transform (MIPS accelerated");
 MODULE_LICENSE("GPL v2");

lib/crypto/powerpc/poly1305-p10-glue.c +0 -6

index 3f1664a724b65..184a71f9c1dee 100644
@@ -70,16 +70,10 @@ void poly1305_emit_arch(const struct poly1305_state *state,
 		return poly1305_emit_generic(state, digest, nonce);
 	poly1305_emit_64(state, nonce, digest);
 }
 EXPORT_SYMBOL_GPL(poly1305_emit_arch);
 
-bool poly1305_is_arch_optimized(void)
-{
-	return static_key_enabled(&have_p10);
-}
-EXPORT_SYMBOL(poly1305_is_arch_optimized);
-
 static int __init poly1305_p10_init(void)
 {
 	if (cpu_has_feature(CPU_FTR_ARCH_31))
 		static_branch_enable(&have_p10);
 	return 0;

lib/crypto/x86/poly1305_glue.c +0 -6

index 856d48fd422b0..deb5841cb0ada 100644
@@ -139,16 +139,10 @@ void poly1305_emit_arch(const struct poly1305_state *ctx,
 	else
 		poly1305_emit_avx(ctx, mac, nonce);
 }
 EXPORT_SYMBOL_GPL(poly1305_emit_arch);
 
-bool poly1305_is_arch_optimized(void)
-{
-	return static_key_enabled(&poly1305_use_avx);
-}
-EXPORT_SYMBOL(poly1305_is_arch_optimized);
-
 static int __init poly1305_simd_mod_init(void)
 {
 	if (boot_cpu_has(X86_FEATURE_AVX) &&
 	    cpu_has_xfeatures(XFEATURE_MASK_SSE | XFEATURE_MASK_YMM, NULL))
 		static_branch_enable(&poly1305_use_avx);

Signature · 1 line

2.50.1

Eric Biggers

author maintainer

2025-08-16 19:47 UTC #2 lore raw

PATCH 2/3 lib/crypto: poly1305: Consolidate into single module

In reply to Eric Biggers

Consolidate the Poly1305 code into a single module, similar to various other algorithms (SHA-1, SHA-256, SHA-512, etc.):

- Each arch now provides a header file lib/crypto/$(SRCARCH)/poly1305.h, replacing lib/crypto/$(SRCARCH)/poly1305*.c. The header defines poly1305_block_init(), poly1305_blocks(), poly1305_emit(), and optionally poly1305_mod_init_arch(). It is included by lib/crypto/poly1305.c, and thus the code gets built into the single libpoly1305 module, with improved inlining in some cases.

- Whether arch-optimized Poly1305 is buildable is now controlled centrally by lib/crypto/Kconfig instead of by lib/crypto/$(SRCARCH)/Kconfig. The conditions for enabling it remain the same as before, and it remains enabled by default. (The PPC64 one remains unconditionally disabled due to 'depends on BROKEN'.)

- Any additional arch-specific translation units for the optimized Poly1305 code, such as assembly files, are now compiled by lib/crypto/Makefile instead of lib/crypto/$(SRCARCH)/Makefile.

A special consideration is needed because the Adiantum code uses the poly1305_core_*() functions directly. For now, just carry forward that approach. This means retaining the CRYPTO_LIB_POLY1305_GENERIC kconfig symbol, and keeping the poly1305_core_*() functions in separate translation units. So it's not quite as streamlined I've done with the other hash functions, but we still get a single libpoly1305 module.

Note: to see the diff from the arm, arm64, and x86 .c files to the new .h files, view this commit with 'git show -M10'.

Signed-off-by Eric Biggers <[email protected]>

---
 crypto/Kconfig                                |  2 +
 include/crypto/internal/poly1305.h            | 16 ++--
 lib/crypto/Kconfig                            | 50 ++++++------
 lib/crypto/Makefile                           | 57 +++++++++++--
 lib/crypto/arm/Kconfig                        |  5 --
 lib/crypto/arm/Makefile                       | 18 -----
 lib/crypto/arm/poly1305-armv4.pl              |  3 +-
 lib/crypto/arm/poly1305-glue.c                | 69 ----------------
 lib/crypto/arm/poly1305.h                     | 53 ++++++++++++
 lib/crypto/arm64/Kconfig                      |  6 --
 lib/crypto/arm64/Makefile                     | 13 ---
 lib/crypto/arm64/poly1305-armv8.pl            |  3 +
 lib/crypto/arm64/poly1305-glue.c              | 67 ---------------
 lib/crypto/arm64/poly1305.h                   | 50 ++++++++++++
 lib/crypto/mips/Kconfig                       |  5 --
 lib/crypto/mips/Makefile                      | 14 ----
 lib/crypto/mips/poly1305-glue.c               | 27 -------
 lib/crypto/mips/poly1305-mips.pl              |  8 +-
 lib/crypto/mips/poly1305.h                    | 14 ++++
 lib/crypto/poly1305-generic.c                 | 25 ------
 lib/crypto/poly1305.c                         | 81 ++++++++++++-------
 lib/crypto/powerpc/Kconfig                    |  8 --
 lib/crypto/powerpc/Makefile                   |  3 -
 .../{poly1305-p10-glue.c => poly1305.h}       | 34 +++-----
 lib/crypto/x86/Kconfig                        |  6 --
 lib/crypto/x86/Makefile                       | 10 ---
 lib/crypto/x86/poly1305-x86_64-cryptogams.pl  | 33 +++-----
 .../x86/{poly1305_glue.c => poly1305.h}       | 41 ++++------
 28 files changed, 297 insertions(+), 424 deletions(-)
 delete mode 100644 lib/crypto/arm/poly1305-glue.c
 create mode 100644 lib/crypto/arm/poly1305.h
 delete mode 100644 lib/crypto/arm64/poly1305-glue.c
 create mode 100644 lib/crypto/arm64/poly1305.h
 delete mode 100644 lib/crypto/mips/poly1305-glue.c
 create mode 100644 lib/crypto/mips/poly1305.h
 delete mode 100644 lib/crypto/poly1305-generic.c
 rename lib/crypto/powerpc/{poly1305-p10-glue.c => poly1305.h} (66%)
 rename lib/crypto/x86/{poly1305_glue.c => poly1305.h} (85%)

crypto/Kconfig +2 -0

index 1575dbec084d6..e8ccf5f51b855 100644
@@ -607,10 +607,11 @@ endmenu
 menu "Length-preserving ciphers and modes"
 
 config CRYPTO_ADIANTUM
 	tristate "Adiantum"
 	select CRYPTO_CHACHA20
+	select CRYPTO_LIB_POLY1305
 	select CRYPTO_LIB_POLY1305_GENERIC
 	select CRYPTO_NHPOLY1305
 	select CRYPTO_MANAGER
 	help
 	  Adiantum tweakable, length-preserving encryption mode

@@ -768,10 +769,11 @@ config CRYPTO_XTS
 	  multiple of 16 bytes.
 
 config CRYPTO_NHPOLY1305
 	tristate
 	select CRYPTO_HASH
+	select CRYPTO_LIB_POLY1305
 	select CRYPTO_LIB_POLY1305_GENERIC
 
 endmenu
 
 menu "AEAD (authenticated encryption with associated data) ciphers"

include/crypto/internal/poly1305.h +7 -9

index c60315f475623..a72fff409ab85 100644
@@ -28,28 +28,26 @@ void poly1305_core_blocks(struct poly1305_state *state,
 			  const struct poly1305_core_key *key, const void *src,
 			  unsigned int nblocks, u32 hibit);
 void poly1305_core_emit(const struct poly1305_state *state, const u32 nonce[4],
 			void *dst);
 
-void poly1305_block_init_arch(struct poly1305_block_state *state,
-			      const u8 raw_key[POLY1305_BLOCK_SIZE]);
-void poly1305_block_init_generic(struct poly1305_block_state *state,
-				 const u8 raw_key[POLY1305_BLOCK_SIZE]);
-void poly1305_blocks_arch(struct poly1305_block_state *state, const u8 *src,
-			  unsigned int len, u32 padbit);
+static inline void
+poly1305_block_init_generic(struct poly1305_block_state *desc,
+			    const u8 raw_key[POLY1305_BLOCK_SIZE])
+{
+	poly1305_core_init(&desc->h);
+	poly1305_core_setkey(&desc->core_r, raw_key);
+}
 
 static inline void poly1305_blocks_generic(struct poly1305_block_state *state,
 					   const u8 *src, unsigned int len,
 					   u32 padbit)
 {
 	poly1305_core_blocks(&state->h, &state->core_r, src,
 			     len / POLY1305_BLOCK_SIZE, padbit);
 }
 
-void poly1305_emit_arch(const struct poly1305_state *state,
-			u8 digest[POLY1305_DIGEST_SIZE], const u32 nonce[4]);
-
 static inline void poly1305_emit_generic(const struct poly1305_state *state,
 					 u8 digest[POLY1305_DIGEST_SIZE],
 					 const u32 nonce[4])
 {
 	poly1305_core_emit(state, nonce, digest);

lib/crypto/Kconfig +27 ~~-23~~

67 lines not on this page · raw message

lib/crypto/Makefile +51 -6

68 lines not on this page · raw message

lib/crypto/arm/Kconfig +0 -5

index e8444fd0aae30..0d821e282c645 100644
@@ -15,10 +15,5 @@ config CRYPTO_BLAKE2S_ARM
 
 config CRYPTO_CHACHA20_NEON
 	tristate
 	default CRYPTO_LIB_CHACHA
 	select CRYPTO_ARCH_HAVE_LIB_CHACHA
-
-config CRYPTO_POLY1305_ARM
-	tristate
-	default CRYPTO_LIB_POLY1305
-	select CRYPTO_ARCH_HAVE_LIB_POLY1305

lib/crypto/arm/Makefile +0 ~~-18~~

index 4c042a4c77ed6..9f70e61d419e2 100644
@@ -4,23 +4,5 @@ obj-$(CONFIG_CRYPTO_BLAKE2S_ARM) += libblake2s-arm.o
 libblake2s-arm-y := blake2s-core.o blake2s-glue.o
 
 obj-$(CONFIG_CRYPTO_CHACHA20_NEON) += chacha-neon.o
 chacha-neon-y := chacha-scalar-core.o chacha-glue.o
 chacha-neon-$(CONFIG_KERNEL_MODE_NEON) += chacha-neon-core.o
-
-obj-$(CONFIG_CRYPTO_POLY1305_ARM) += poly1305-arm.o
-poly1305-arm-y := poly1305-core.o poly1305-glue.o
-
-quiet_cmd_perl = PERL    $@
-      cmd_perl = $(PERL) $(<) > $(@)
-
-$(obj)/%-core.S: $(src)/%-armv4.pl
-	$(call cmd,perl)
-
-clean-files += poly1305-core.S
-
-aflags-thumb2-$(CONFIG_THUMB2_KERNEL)  := -U__thumb2__ -D__thumb2__=1
-
-# massage the perlasm code a bit so we only get the NEON routine if we need it
-poly1305-aflags-$(CONFIG_CPU_V7) := -U__LINUX_ARM_ARCH__ -D__LINUX_ARM_ARCH__=5
-poly1305-aflags-$(CONFIG_KERNEL_MODE_NEON) := -U__LINUX_ARM_ARCH__ -D__LINUX_ARM_ARCH__=7
-AFLAGS_poly1305-core.o += $(poly1305-aflags-y) $(aflags-thumb2-y)

lib/crypto/arm/poly1305-armv4.pl +1 -2

index dd7a996361a71..34c11b7b44bd7 100644
@@ -41,13 +41,12 @@ $code.=<<___;
 #ifndef	__KERNEL__
 # include "arm_arch.h"
 #else
 # define __ARM_ARCH__ __LINUX_ARM_ARCH__
 # define __ARM_MAX_ARCH__ __LINUX_ARM_ARCH__
-# define poly1305_init   poly1305_block_init_arch
+# define poly1305_init   poly1305_block_init
 # define poly1305_blocks poly1305_blocks_arm
-# define poly1305_emit   poly1305_emit_arch
 #endif
 
 #if defined(__thumb2__)
 .syntax	unified
 .thumb

lib/crypto/arm/poly1305-glue.c deleted +0 ~~-69~~

69 lines not on this page · raw message

lib/crypto/arm/poly1305.h new file +53 -0

53 lines not on this page · raw message

lib/crypto/arm64/Kconfig +0 -6

index 0b903ef524d85..07c8a4f0ab03a 100644
@@ -4,11 +4,5 @@ config CRYPTO_CHACHA20_NEON
 	tristate
 	depends on KERNEL_MODE_NEON
 	default CRYPTO_LIB_CHACHA
 	select CRYPTO_LIB_CHACHA_GENERIC
 	select CRYPTO_ARCH_HAVE_LIB_CHACHA
-
-config CRYPTO_POLY1305_NEON
-	tristate
-	depends on KERNEL_MODE_NEON
-	default CRYPTO_LIB_POLY1305
-	select CRYPTO_ARCH_HAVE_LIB_POLY1305

lib/crypto/arm64/Makefile +0 ~~-13~~

index 6207088397a73..d49cceca3d1ca 100644
@@ -1,17 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
 
 obj-$(CONFIG_CRYPTO_CHACHA20_NEON) += chacha-neon.o
 chacha-neon-y := chacha-neon-core.o chacha-neon-glue.o
-
-obj-$(CONFIG_CRYPTO_POLY1305_NEON) += poly1305-neon.o
-poly1305-neon-y := poly1305-core.o poly1305-glue.o
-AFLAGS_poly1305-core.o += -Dpoly1305_init=poly1305_block_init_arch
-AFLAGS_poly1305-core.o += -Dpoly1305_emit=poly1305_emit_arch
-
-quiet_cmd_perlasm = PERLASM $@
-      cmd_perlasm = $(PERL) $(<) void $(@)
-
-$(obj)/%-core.S: $(src)/%-armv8.pl
-	$(call cmd,perlasm)
-
-clean-files += poly1305-core.S

lib/crypto/arm64/poly1305-armv8.pl +3 -0

index 22c9069c06505..f1930c6b55cee 100644
@@ -48,10 +48,13 @@ my ($h0,$h1,$h2,$r0,$r1,$s1,$t0,$t1,$d0,$d1,$d2) = map("x$_",(4..14));
 
 $code.=<<___;
 #ifndef __KERNEL__
 # include "arm_arch.h"
 .extern	OPENSSL_armcap_P
+#else
+# define poly1305_init   poly1305_block_init
+# define poly1305_blocks poly1305_blocks_arm64
 #endif
 
 .text
 
 // forward "declarations" are required for Apple

lib/crypto/arm64/poly1305-glue.c deleted +0 ~~-67~~

67 lines not on this page · raw message

lib/crypto/arm64/poly1305.h new file +50 -0

50 lines not on this page · raw message

lib/crypto/mips/Kconfig +0 -5

index 0670a170c1be0..94c1a0892c203 100644
@@ -3,10 +3,5 @@
 config CRYPTO_CHACHA_MIPS
 	tristate
 	depends on CPU_MIPS32_R2
 	default CRYPTO_LIB_CHACHA
 	select CRYPTO_ARCH_HAVE_LIB_CHACHA
-
-config CRYPTO_POLY1305_MIPS
-	tristate
-	default CRYPTO_LIB_POLY1305
-	select CRYPTO_ARCH_HAVE_LIB_POLY1305

lib/crypto/mips/Makefile +0 ~~-14~~

index 804488c7adedc..b5ea0e25c21ef 100644
@@ -1,19 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0-only
 
 obj-$(CONFIG_CRYPTO_CHACHA_MIPS) += chacha-mips.o
 chacha-mips-y := chacha-core.o chacha-glue.o
 AFLAGS_chacha-core.o += -O2 # needed to fill branch delay slots
-
-obj-$(CONFIG_CRYPTO_POLY1305_MIPS) += poly1305-mips.o
-poly1305-mips-y := poly1305-core.o poly1305-glue.o
-
-perlasm-flavour-$(CONFIG_32BIT) := o32
-perlasm-flavour-$(CONFIG_64BIT) := 64
-
-quiet_cmd_perlasm = PERLASM $@
-      cmd_perlasm = $(PERL) $(<) $(perlasm-flavour-y) $(@)
-
-$(obj)/poly1305-core.S: $(src)/poly1305-mips.pl FORCE
-	$(call if_changed,perlasm)
-
-targets += poly1305-core.S

lib/crypto/mips/poly1305-glue.c deleted +0 ~~-27~~

deleted file mode 100644
index 002f50f710aba..0000000000000
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * OpenSSL/Cryptogams accelerated Poly1305 transform for MIPS
- *
- * Copyright (C) 2019 Linaro Ltd. <[email protected]>
- */
-
-#include <crypto/internal/poly1305.h>
-#include <linux/cpufeature.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/unaligned.h>
-
-asmlinkage void poly1305_block_init_arch(
-	struct poly1305_block_state *state,
-	const u8 raw_key[POLY1305_BLOCK_SIZE]);
-EXPORT_SYMBOL_GPL(poly1305_block_init_arch);
-asmlinkage void poly1305_blocks_arch(struct poly1305_block_state *state,
-				     const u8 *src, u32 len, u32 hibit);
-EXPORT_SYMBOL_GPL(poly1305_blocks_arch);
-asmlinkage void poly1305_emit_arch(const struct poly1305_state *state,
-				   u8 digest[POLY1305_DIGEST_SIZE],
-				   const u32 nonce[4]);
-EXPORT_SYMBOL_GPL(poly1305_emit_arch);
-
-MODULE_DESCRIPTION("Poly1305 transform (MIPS accelerated");
-MODULE_LICENSE("GPL v2");

lib/crypto/mips/poly1305-mips.pl +2 -6

index 399f10c3e3850..71347f34f4f9f 100644
@@ -91,13 +91,11 @@ $code.=<<___;
 # define mflo(rd,rs,rt)	mflo	rd
 # define mfhi(rd,rs,rt)	mfhi	rd
 #endif
 
 #ifdef	__KERNEL__
-# define poly1305_init   poly1305_block_init_arch
-# define poly1305_blocks poly1305_blocks_arch
-# define poly1305_emit   poly1305_emit_arch
+# define poly1305_init   poly1305_block_init
 #endif
 
 #if defined(__MIPSEB__) && !defined(MIPSEB)
 # define MIPSEB
 #endif

@@ -563,13 +561,11 @@ $code.=<<___;
 # define mflo(rd,rs,rt)	mflo	rd
 # define mfhi(rd,rs,rt)	mfhi	rd
 #endif
 
 #ifdef	__KERNEL__
-# define poly1305_init   poly1305_block_init_arch
-# define poly1305_blocks poly1305_blocks_arch
-# define poly1305_emit   poly1305_emit_arch
+# define poly1305_init   poly1305_block_init
 #endif
 
 #if defined(__MIPSEB__) && !defined(MIPSEB)
 # define MIPSEB
 #endif

lib/crypto/mips/poly1305.h new file +14 -0

new file mode 100644
index 0000000000000..85de450f1a93d
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * OpenSSL/Cryptogams accelerated Poly1305 transform for MIPS
+ *
+ * Copyright (C) 2019 Linaro Ltd. <[email protected]>
+ */
+
+asmlinkage void poly1305_block_init(struct poly1305_block_state *state,
+				    const u8 raw_key[POLY1305_BLOCK_SIZE]);
+asmlinkage void poly1305_blocks(struct poly1305_block_state *state,
+				const u8 *src, u32 len, u32 hibit);
+asmlinkage void poly1305_emit(const struct poly1305_state *state,
+			      u8 digest[POLY1305_DIGEST_SIZE],
+			      const u32 nonce[4]);

lib/crypto/poly1305-generic.c deleted +0 ~~-25~~

deleted file mode 100644
index 71a16c5c538b4..0000000000000
@@ -1,25 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Poly1305 authenticator algorithm, RFC7539
- *
- * Copyright (C) 2015 Martin Willi
- *
- * Based on public domain code by Andrew Moon and Daniel J. Bernstein.
- */
-
-#include <crypto/internal/poly1305.h>
-#include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-
-void poly1305_block_init_generic(struct poly1305_block_state *desc,
-				 const u8 raw_key[POLY1305_BLOCK_SIZE])
-{
-	poly1305_core_init(&desc->h);
-	poly1305_core_setkey(&desc->core_r, raw_key);
-}
-EXPORT_SYMBOL_GPL(poly1305_block_init_generic);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Martin Willi <[email protected]>");
-MODULE_DESCRIPTION("Poly1305 algorithm (generic implementation)");

lib/crypto/poly1305.c +53 ~~-28~~

124 lines not on this page · raw message

lib/crypto/powerpc/Kconfig +0 -8

index 2eaeb7665a6a0..e41012a61876e 100644
@@ -4,13 +4,5 @@ config CRYPTO_CHACHA20_P10
 	tristate
 	depends on PPC64 && CPU_LITTLE_ENDIAN && VSX
 	default CRYPTO_LIB_CHACHA
 	select CRYPTO_LIB_CHACHA_GENERIC
 	select CRYPTO_ARCH_HAVE_LIB_CHACHA
-
-config CRYPTO_POLY1305_P10
-	tristate
-	depends on PPC64 && CPU_LITTLE_ENDIAN && VSX
-	depends on BROKEN # Needs to be fixed to work in softirq context
-	default CRYPTO_LIB_POLY1305
-	select CRYPTO_ARCH_HAVE_LIB_POLY1305
-	select CRYPTO_LIB_POLY1305_GENERIC

lib/crypto/powerpc/Makefile +0 -3

index 5709ae14258a0..778a04edd226c 100644
@@ -1,7 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0-only
 
 obj-$(CONFIG_CRYPTO_CHACHA20_P10) += chacha-p10-crypto.o
 chacha-p10-crypto-y := chacha-p10-glue.o chacha-p10le-8x.o
-
-obj-$(CONFIG_CRYPTO_POLY1305_P10) += poly1305-p10-crypto.o
-poly1305-p10-crypto-y := poly1305-p10-glue.o poly1305-p10le_64.o

lib/crypto/powerpc/poly1305.h renamed from lib/crypto/powerpc/poly1305-p10-glue.c +9 ~~-25~~

similarity index 66%
rename from lib/crypto/powerpc/poly1305-p10-glue.c
rename to lib/crypto/powerpc/poly1305.h
index 184a71f9c1dee..b8ed098a0e95f 100644
@@ -1,17 +1,15 @@
-// SPDX-License-Identifier: GPL-2.0
+/* SPDX-License-Identifier: GPL-2.0 */
 /*
  * Poly1305 authenticator algorithm, RFC7539.
  *
  * Copyright 2023- IBM Corp. All rights reserved.
  */
 #include <asm/switch_to.h>
-#include <crypto/internal/poly1305.h>
 #include <linux/cpufeature.h>
 #include <linux/jump_label.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/unaligned.h>
 
 asmlinkage void poly1305_p10le_4blocks(struct poly1305_block_state *state, const u8 *m, u32 mlen);
 asmlinkage void poly1305_64s(struct poly1305_block_state *state, const u8 *m, u32 mlen, int highbit);
 asmlinkage void poly1305_emit_64(const struct poly1305_state *state, const u32 nonce[4], u8 digest[POLY1305_DIGEST_SIZE]);

@@ -28,24 +26,23 @@ static void vsx_end(void)
 {
 	disable_kernel_vsx();
 	preempt_enable();
 }
 
-void poly1305_block_init_arch(struct poly1305_block_state *dctx,
-			      const u8 raw_key[POLY1305_BLOCK_SIZE])
+static void poly1305_block_init(struct poly1305_block_state *dctx,
+				const u8 raw_key[POLY1305_BLOCK_SIZE])
 {
 	if (!static_key_enabled(&have_p10))
 		return poly1305_block_init_generic(dctx, raw_key);
 
 	dctx->h = (struct poly1305_state){};
 	dctx->core_r.key.r64[0] = get_unaligned_le64(raw_key + 0);
 	dctx->core_r.key.r64[1] = get_unaligned_le64(raw_key + 8);
 }
-EXPORT_SYMBOL_GPL(poly1305_block_init_arch);
 
-void poly1305_blocks_arch(struct poly1305_block_state *state, const u8 *src,
-			  unsigned int len, u32 padbit)
+static void poly1305_blocks(struct poly1305_block_state *state, const u8 *src,
+			    unsigned int len, u32 padbit)
 {
 	if (!static_key_enabled(&have_p10))
 		return poly1305_blocks_generic(state, src, len, padbit);
 	vsx_begin();
 	if (len >= POLY1305_BLOCK_SIZE * 4) {

@@ -58,33 +55,20 @@ void poly1305_blocks_arch(struct poly1305_block_state *state, const u8 *src,
 		len -= POLY1305_BLOCK_SIZE;
 		src += POLY1305_BLOCK_SIZE;
 	}
 	vsx_end();
 }
-EXPORT_SYMBOL_GPL(poly1305_blocks_arch);
 
-void poly1305_emit_arch(const struct poly1305_state *state,
-			u8 digest[POLY1305_DIGEST_SIZE],
-			const u32 nonce[4])
+static void poly1305_emit(const struct poly1305_state *state,
+			  u8 digest[POLY1305_DIGEST_SIZE], const u32 nonce[4])
 {
 	if (!static_key_enabled(&have_p10))
 		return poly1305_emit_generic(state, digest, nonce);
 	poly1305_emit_64(state, nonce, digest);
 }
-EXPORT_SYMBOL_GPL(poly1305_emit_arch);
 
-static int __init poly1305_p10_init(void)
+#define poly1305_mod_init_arch poly1305_mod_init_arch
+static void poly1305_mod_init_arch(void)
 {
 	if (cpu_has_feature(CPU_FTR_ARCH_31))
 		static_branch_enable(&have_p10);
-	return 0;
 }
-subsys_initcall(poly1305_p10_init);
-
-static void __exit poly1305_p10_exit(void)
-{
-}
-module_exit(poly1305_p10_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Danny Tsen <[email protected]>");
-MODULE_DESCRIPTION("Optimized Poly1305 for P10");

lib/crypto/x86/Kconfig +0 -6

index 546fe2afe0b51..24dc9a59b2728 100644
@@ -16,11 +16,5 @@ config CRYPTO_CHACHA20_X86_64
 	tristate
 	depends on 64BIT
 	default CRYPTO_LIB_CHACHA
 	select CRYPTO_LIB_CHACHA_GENERIC
 	select CRYPTO_ARCH_HAVE_LIB_CHACHA
-
-config CRYPTO_POLY1305_X86_64
-	tristate
-	depends on 64BIT
-	default CRYPTO_LIB_POLY1305
-	select CRYPTO_ARCH_HAVE_LIB_POLY1305

lib/crypto/x86/Makefile +0 ~~-10~~

index c2ff8c5f1046e..16c9d76f99472 100644
@@ -3,15 +3,5 @@
 obj-$(CONFIG_CRYPTO_BLAKE2S_X86) += libblake2s-x86_64.o
 libblake2s-x86_64-y := blake2s-core.o blake2s-glue.o
 
 obj-$(CONFIG_CRYPTO_CHACHA20_X86_64) += chacha-x86_64.o
 chacha-x86_64-y := chacha-avx2-x86_64.o chacha-ssse3-x86_64.o chacha-avx512vl-x86_64.o chacha_glue.o
-
-obj-$(CONFIG_CRYPTO_POLY1305_X86_64) += poly1305-x86_64.o
-poly1305-x86_64-y := poly1305-x86_64-cryptogams.o poly1305_glue.o
-targets += poly1305-x86_64-cryptogams.S
-
-quiet_cmd_perlasm = PERLASM $@
-      cmd_perlasm = $(PERL) $< > $@
-
-$(obj)/%.S: $(src)/%.pl FORCE
-	$(call if_changed,perlasm)

lib/crypto/x86/poly1305-x86_64-cryptogams.pl +10 ~~-23~~

index 501827254fed7..409ec6955733a 100644
@@ -116,34 +116,21 @@ sub declare_function() {
 		$code .= ".align	$align\n";
 		$code .= "$name:\n";
 	}
 }
 
-sub declare_typed_function() {
-	my ($name, $align, $nargs) = @_;
-	if($kernel) {
-		$code .= "SYM_TYPED_FUNC_START($name)\n";
-		$code .= ".L$name:\n";
-	} else {
-		$code .= ".globl	$name\n";
-		$code .= ".type	$name,\@function,$nargs\n";
-		$code .= ".align	$align\n";
-		$code .= "$name:\n";
-	}
-}
-
 sub end_function() {
 	my ($name) = @_;
 	if($kernel) {
 		$code .= "SYM_FUNC_END($name)\n";
 	} else {
 		$code .= ".size   $name,.-$name\n";
 	}
 }
 
 $code.=<<___ if $kernel;
-#include <linux/cfi_types.h>
+#include <linux/linkage.h>
 ___
 
 if ($avx) {
 $code.=<<___ if $kernel;
 .section .rodata

@@ -247,18 +234,18 @@ $code.=<<___;
 .text
 ___
 $code.=<<___ if (!$kernel);
 .extern	OPENSSL_ia32cap_P
 
-.globl	poly1305_block_init_arch
-.hidden	poly1305_block_init_arch
+.globl	poly1305_init_x86_64
+.hidden	poly1305_init_x86_64
 .globl	poly1305_blocks_x86_64
 .hidden	poly1305_blocks_x86_64
 .globl	poly1305_emit_x86_64
 .hidden	poly1305_emit_x86_64
 ___
-&declare_typed_function("poly1305_block_init_arch", 32, 3);
+&declare_function("poly1305_init_x86_64", 32, 3);
 $code.=<<___;
 	xor	%eax,%eax
 	mov	%rax,0($ctx)		# initialize hash value
 	mov	%rax,8($ctx)
 	mov	%rax,16($ctx)

@@ -309,11 +296,11 @@ ___
 $code.=<<___;
 	mov	\$1,%eax
 .Lno_key:
 	RET
 ___
-&end_function("poly1305_block_init_arch");
+&end_function("poly1305_init_x86_64");
 
 &declare_function("poly1305_blocks_x86_64", 32, 4);
 $code.=<<___;
 .cfi_startproc
 .Lblocks:

@@ -4116,13 +4103,13 @@ avx_handler:
 	RET
 .size	avx_handler,.-avx_handler
 
 .section	.pdata
 .align	4
-	.rva	.LSEH_begin_poly1305_block_init_arch
-	.rva	.LSEH_end_poly1305_block_init_arch
-	.rva	.LSEH_info_poly1305_block_init_arch
+	.rva	.LSEH_begin_poly1305_init_x86_64
+	.rva	.LSEH_end_poly1305_init_x86_64
+	.rva	.LSEH_info_poly1305_init_x86_64
 
 	.rva	.LSEH_begin_poly1305_blocks_x86_64
 	.rva	.LSEH_end_poly1305_blocks_x86_64
 	.rva	.LSEH_info_poly1305_blocks_x86_64

@@ -4166,14 +4153,14 @@ $code.=<<___ if ($avx>2);
 	.rva	.LSEH_info_poly1305_blocks_avx512
 ___
 $code.=<<___;
 .section	.xdata
 .align	8
-.LSEH_info_poly1305_block_init_arch:
+.LSEH_info_poly1305_init_x86_64:
 	.byte	9,0,0,0
 	.rva	se_handler
-	.rva	.LSEH_begin_poly1305_block_init_arch,.LSEH_begin_poly1305_block_init_arch
+	.rva	.LSEH_begin_poly1305_init_x86_64,.LSEH_begin_poly1305_init_x86_64
 
 .LSEH_info_poly1305_blocks_x86_64:
 	.byte	9,0,0,0
 	.rva	se_handler
 	.rva	.Lblocks_body,.Lblocks_epilogue

lib/crypto/x86/poly1305.h renamed from lib/crypto/x86/poly1305_glue.c +15 ~~-26~~

99 lines not on this page · raw message

Signature · 1 line

2.50.1

Eric Biggers

author maintainer

2025-08-21 04:14 UTC #3 lore raw

Re: [PATCH 2/3] lib/crypto: poly1305: Consolidate into single module

Quoted 8 lines · Eric Biggers

lib/crypto/mips/Makefile +0 -8

-perlasm-flavour-$(CONFIG_32BIT) := o32
-perlasm-flavour-$(CONFIG_64BIT) := 64
-
-quiet_cmd_perlasm = PERLASM $@
-      cmd_perlasm = $(PERL) $(<) $(perlasm-flavour-y) $(@)
-
-$(obj)/poly1305-core.S: $(src)/poly1305-mips.pl FORCE
-	$(call if_changed,perlasm)

[...]

lib/crypto/Makefile libmd5-$(CONFIG_PPC) += powerpc/md5-asm.o · line 109

Quoted 9 lines

lib/crypto/Makefile +9 -0

+ifeq ($(CONFIG_MIPS),y)
+libpoly1305-y += mips/poly1305-core.o
+poly1305-perlasm-flavour-$(CONFIG_32BIT) := o32
+poly1305-perlasm-flavour-$(CONFIG_64BIT) := 64
+quiet_cmd_perlasm_poly1305 = PERLASM $@
+      cmd_perlasm_poly1305 = $(PERL) $< $(poly1305-perlasm-flavour-y) $@
+$(obj)/mips/poly1305-core.S: $(src)/mips/poly1305-mips.pl
+	$(call if_changed,perlasm_poly1305)
+endif

Small issue that I noticed: I removed the "FORCE" from the rule for poly1305-core.S since none of the other perlasm rules had it. But it's actually needed because, unlike the other perlasm rules, this one uses 'if_changed' instead of 'cmd'. 'if_changed' requires FORCE. And I believe it does need to use 'if_changed', since the contents of the generated .S file depends on the perlasm-flavour passed as an argument to the perl script. That can change when the kernel config changes.

So, TLDR: I'll restore the FORCE to the rule, and add a comment.

The RISC-V optimized Poly1305 code added by the third patch will need if_changed and FORCE for the same reason.

Of course, it's unfortunate that these are written in Perl at all. But that is the convention used by Andy / CRYPTOGAMS, so that is what we'll use unless someone wants to rewrite it...

- Eric

Eric Biggers

author maintainer

2025-08-16 19:47 UTC #4 lore raw

PATCH 3/3 lib/crypto: riscv/poly1305: Import OpenSSL/CRYPTOGAMS implementation

In reply to Eric Biggers

From: Zhihang Shao <[email protected]>

This is a straight import of the OpenSSL/CRYPTOGAMS Poly1305 implementation for riscv authored by Andy Polyakov. The file 'poly1305-riscv.pl' is taken straight from
https://github.com/dot-asm/cryptogams commit 5e3fba73576244708a752fa61a8e93e587f271bb. This patch was tested on SpacemiT X60, with 2~2.5x improvement over generic implementation.

Signed-off-by Chunyan Zhang <[email protected]>

Signed-off-by Zhihang Shao <[email protected]>

[EB: ported to lib/crypto/riscv/]

Signed-off-by Eric Biggers <[email protected]>

---
 lib/crypto/Kconfig                 |   3 +-
 lib/crypto/Makefile                |  12 +
 lib/crypto/riscv/poly1305-riscv.pl | 847 +++++++++++++++++++++++++++++
 lib/crypto/riscv/poly1305.h        |  14 +
 4 files changed, 875 insertions(+), 1 deletion(-)
 create mode 100644 lib/crypto/riscv/poly1305-riscv.pl
 create mode 100644 lib/crypto/riscv/poly1305.h

lib/crypto/Kconfig +2 -1

index 4a7d67438c3bf..879c15470ee92 100644
@@ -126,10 +126,11 @@ config CRYPTO_LIB_POLY1305_ARCH
 	default y if ARM
 	default y if ARM64 && KERNEL_MODE_NEON
 	default y if MIPS
 	# The PPC64 code needs to be fixed to work in softirq context.
 	default y if PPC64 && CPU_LITTLE_ENDIAN && VSX && BROKEN
+	default y if RISCV
 	default y if X86_64
 
 # This symbol controls the inclusion of the Poly1305 generic code.  This differs
 # from most of the other algorithms, which handle the generic code
 # "automatically" via __maybe_unused.  This is needed so that the Adiantum code,

@@ -141,11 +142,11 @@ config CRYPTO_LIB_POLY1305_GENERIC
 	# impl as a fallback.  (Or if selected explicitly.)
 	default y if !CRYPTO_LIB_POLY1305_ARCH || PPC64
 
 config CRYPTO_LIB_POLY1305_RSIZE
 	int
-	default 2 if MIPS
+	default 2 if MIPS || RISCV
 	default 11 if X86_64
 	default 9 if ARM || ARM64
 	default 1
 
 config CRYPTO_LIB_CHACHA20POLY1305

lib/crypto/Makefile +12 -0

index f35f28d9d0e5e..1cda789704349 100644
@@ -108,10 +108,21 @@ $(obj)/mips/poly1305-core.S: $(src)/mips/poly1305-mips.pl
 	$(call if_changed,perlasm_poly1305)
 endif
 
 libpoly1305-$(CONFIG_PPC) += powerpc/poly1305-p10le_64.o
 
+ifeq ($(CONFIG_RISCV),y)
+libpoly1305-y += riscv/poly1305-core.o
+poly1305-perlasm-flavour-$(CONFIG_32BIT) := 32
+poly1305-perlasm-flavour-$(CONFIG_64BIT) := 64
+quiet_cmd_perlasm_poly1305 = PERLASM $@
+      cmd_perlasm_poly1305 = $(PERL) $< $(poly1305-perlasm-flavour-y) $@
+$(obj)/riscv/poly1305-core.S: $(src)/riscv/poly1305-riscv.pl
+	$(call if_changed,perlasm_poly1305)
+AFLAGS_riscv/poly1305-core.o += -Dpoly1305_init=poly1305_block_init
+endif
+
 ifeq ($(CONFIG_X86),y)
 libpoly1305-y += x86/poly1305-x86_64-cryptogams.o
 $(obj)/x86/poly1305-x86_64-cryptogams.S: $(src)/x86/poly1305-x86_64-cryptogams.pl
 	$(call cmd,perlasm)
 endif

@@ -120,10 +131,11 @@ endif # CONFIG_CRYPTO_LIB_POLY1305_ARCH
 
 # clean-files must be defined unconditionally
 clean-files += arm/poly1305-core.S \
 	       arm64/poly1305-core.S \
 	       mips/poly1305-core.S \
+	       riscv/poly1305-core.S \
 	       x86/poly1305-x86_64-cryptogams.S
 
 ################################################################################
 
 obj-$(CONFIG_CRYPTO_LIB_SHA1) += libsha1.o

lib/crypto/riscv/poly1305-riscv.pl new file +847 -0

847 lines not on this page · raw message

lib/crypto/riscv/poly1305.h new file +14 -0

new file mode 100644
index 0000000000000..88f3df44e355e
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * OpenSSL/Cryptogams accelerated Poly1305 transform for riscv
+ *
+ * Copyright (C) 2025 Institute of Software, CAS.
+ */
+
+asmlinkage void poly1305_block_init(struct poly1305_block_state *state,
+				    const u8 raw_key[POLY1305_BLOCK_SIZE]);
+asmlinkage void poly1305_blocks(struct poly1305_block_state *state,
+				const u8 *src, u32 len, u32 hibit);
+asmlinkage void poly1305_emit(const struct poly1305_state *state,
+			      u8 digest[POLY1305_DIGEST_SIZE],
+			      const u32 nonce[4]);

Signature · 1 line

2.50.1