Skip to contentSkip to conversation

FAILED: patch "[PATCH] arm64: dts: ti: k3-am62-main: Remove eMMC High Speed DDR" failed to apply to 6.6-stable tree

PATCH New [email protected] 2 participants 2 messages Aug 21, 2025 – Aug 22, 2025

Subsystems (3)
lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

The patch below does not apply to the 6.6-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.6.y
git checkout FETCH_HEAD
git cherry-pick -x 265f70af805f33a0dfc90f50cc0f116f702c3811
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2025082118-blend-penniless-0629@gregkh' --subject-prefix 'PATCH 6.6.y' HEAD^..

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 265f70af805f33a0dfc90f50cc0f116f702c3811 Mon Sep 17 00:00:00 2001
From: Judith Mendez <[email protected]>
Date: Mon, 7 Jul 2025 14:12:50 -0500
Subject: [PATCH] arm64: dts: ti: k3-am62-main: Remove eMMC High Speed DDR
support

For eMMC, High Speed DDR mode is not supported [0], so remove mmc-ddr-1_8v flag which adds the capability.

[0] https://www.ti.com/lit/gpn/am625

Fixes c37c58fdeb8a ("arm64: dts: ti: k3-am62: Add more peripheral nodes")
arch/arm64/boot/dts/ti/k3-am62-main.dtsi +0 -1
index 9e0b6eee9ac7..120ba8f9dd0e 100644
@@ -553,7 +553,6 @@ sdhci0: mmc@fa10000 {
 		clocks = <&k3_clks 57 5>, <&k3_clks 57 6>;
 		clock-names = "clk_ahb", "clk_xin";
 		bus-width = <8>;
-		mmc-ddr-1_8v;
 		mmc-hs200-1_8v;
 		ti,clkbuf-sel = <0x7>;
 		ti,otap-del-sel-legacy = <0x0>;
maintainer
#1 lore raw

PATCH 1/1 arm64: dts: ti: k3-am62-main: Remove eMMC High Speed DDR support

From: Judith Mendez <[email protected]>

[ Upstream commit 265f70af805f33a0dfc90f50cc0f116f702c3811 ]

For eMMC, High Speed DDR mode is not supported [0], so remove mmc-ddr-1_8v flag which adds the capability.

[0] https://www.ti.com/lit/gpn/am625

Fixes c37c58fdeb8a ("arm64: dts: ti: k3-am62: Add more peripheral nodes")
[ adapted context ]
---
 arch/arm64/boot/dts/ti/k3-am62-main.dtsi | 1 -
 1 file changed, 1 deletion(-)
arch/arm64/boot/dts/ti/k3-am62-main.dtsi +0 -1
index f156167b4e8a..3f74767d63ab 100644
@@ -531,7 +531,6 @@ sdhci0: mmc@fa10000 {
 		clock-names = "clk_ahb", "clk_xin";
 		assigned-clocks = <&k3_clks 57 6>;
 		assigned-clock-parents = <&k3_clks 57 8>;
-		mmc-ddr-1_8v;
 		mmc-hs200-1_8v;
 		ti,trm-icp = <0x2>;
 		bus-width = <8>;
Signature · 1 line
2.50.1