FAILED: patch "[PATCH] iio: adc: ad7173: fix setting ODR in probe" failed to apply to 6.12-stable tree

The patch below does not apply to the 6.12-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.

To reproduce the conflict and resubmit, you may use the following commands:

git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y
git checkout FETCH_HEAD
git cherry-pick -x 6fa908abd19cc35c205f343b79c67ff38dbc9b76
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2025082135-slept-video-cdcc@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^..

Possible dependencies:

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 6fa908abd19cc35c205f343b79c67ff38dbc9b76 Mon Sep 17 00:00:00 2001
From: David Lechner <[email protected]>
Date: Thu, 10 Jul 2025 15:43:40 -0500
Subject: [PATCH] iio: adc: ad7173: fix setting ODR in probe

Fix the setting of the ODR register value in the probe function for AD7177. The AD7177 chip has a different ODR value after reset than the other chips (0x7 vs. 0x0) and 0 is a reserved value on that chip.

The driver already has this information available in odr_start_value and uses it when checking valid values when writing to the sampling_frequency attribute, but failed to set the correct initial value in the probe function.

index 2173455c0169..4413207be28f 100644
@@ -1589,6 +1589,7 @@ static int ad7173_fw_parse_channel_config(struct iio_dev *indio_dev)
 		chan_st_priv->cfg.bipolar = false;
 		chan_st_priv->cfg.input_buf = st->info->has_input_buf;
 		chan_st_priv->cfg.ref_sel = AD7173_SETUP_REF_SEL_INT_REF;
+		chan_st_priv->cfg.odr = st->info->odr_start_value;
 		chan_st_priv->cfg.openwire_comp_chan = -1;
 		st->adc_mode |= AD7173_ADC_MODE_REF_EN;
 		if (st->info->data_reg_only_16bit)

@@ -1655,7 +1656,7 @@ static int ad7173_fw_parse_channel_config(struct iio_dev *indio_dev)
 		chan->scan_index = chan_index;
 		chan->channel = ain[0];
 		chan_st_priv->cfg.input_buf = st->info->has_input_buf;
-		chan_st_priv->cfg.odr = 0;
+		chan_st_priv->cfg.odr = st->info->odr_start_value;
 		chan_st_priv->cfg.openwire_comp_chan = -1;
 
 		chan_st_priv->cfg.bipolar = fwnode_property_read_bool(child, "bipolar");

From: David Lechner <[email protected]>

[ Upstream commit 6fa908abd19cc35c205f343b79c67ff38dbc9b76 ]

Fix the setting of the ODR register value in the probe function for AD7177. The AD7177 chip has a different ODR value after reset than the other chips (0x7 vs. 0x0) and 0 is a reserved value on that chip.

The driver already has this information available in odr_start_value and uses it when checking valid values when writing to the sampling_frequency attribute, but failed to set the correct initial value in the probe function.

---
 drivers/iio/adc/ad7173.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

index 2eebc6f761a6..19b583e00753 100644
@@ -1243,6 +1243,7 @@ static int ad7173_fw_parse_channel_config(struct iio_dev *indio_dev)
 		chan_st_priv->cfg.bipolar = false;
 		chan_st_priv->cfg.input_buf = st->info->has_input_buf;
 		chan_st_priv->cfg.ref_sel = AD7173_SETUP_REF_SEL_INT_REF;
+		chan_st_priv->cfg.odr = st->info->odr_start_value;
 		st->adc_mode |= AD7173_ADC_MODE_REF_EN;
 
 		chan_index++;

@@ -1307,7 +1308,7 @@ static int ad7173_fw_parse_channel_config(struct iio_dev *indio_dev)
 		chan->channel = ain[0];
 		chan_st_priv->chan_reg = chan_index;
 		chan_st_priv->cfg.input_buf = st->info->has_input_buf;
-		chan_st_priv->cfg.odr = 0;
+		chan_st_priv->cfg.odr = st->info->odr_start_value;
 
 		chan_st_priv->cfg.bipolar = fwnode_property_read_bool(child, "bipolar");
 		if (chan_st_priv->cfg.bipolar)

2.50.1