dt-bindings: gpio: Add Tegra256 support
Subsystems (3)
PATCH 1/2 dt-bindings: gpio: Add Tegra256 support
Extend the existing Tegra186 GPIO controller device tree bindings with support for the GPIO controller found on Tegra256. The number of pins is slightly different, but the programming model remains the same
Add a new header, include/dt-bindings/gpio/tegra256-gpio.h, that defines port IDs as well as the TEGRA256_MAIN_GPIO() helper, both of which are used in conjunction to create a unique specifier for each pin. The OS can reconstruct the port ID and pin from these values to determine the register region for the corresponding GPIO. However, the OS does not use the macro definitions in this file.
The symbolic names help associate these GPIO specifiers with the names used in the technical documentation available for the chip.
--- .../bindings/gpio/nvidia,tegra186-gpio.yaml | 2 ++ include/dt-bindings/gpio/tegra256-gpio.h | 28 +++++++++++++++++++ 2 files changed, 30 insertions(+) create mode 100644 include/dt-bindings/gpio/tegra256-gpio.h
Documentation/devicetree/bindings/gpio/nvidia,tegra186-gpio.yaml +2 -0
@@ -85,6 +85,7 @@ properties: - nvidia,tegra194-gpio-aon - nvidia,tegra234-gpio - nvidia,tegra234-gpio-aon + - nvidia,tegra256-gpio reg-names: items:
@@ -155,6 +156,7 @@ allOf: - nvidia,tegra186-gpio - nvidia,tegra194-gpio - nvidia,tegra234-gpio + - nvidia,tegra256-gpio then: properties: interrupts:
include/dt-bindings/gpio/tegra256-gpio.h new file +28 -0
@@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* Copyright (c) 2025, NVIDIA CORPORATION. All rights reserved. */ + +/* +* This header provides constants for the nvidia,tegra256-gpio DT binding. +* +* The first cell in Tegra's GPIO specifier is the GPIO ID. +* The macros below provide names for this. +* +* The second cell contains standard flag values specified in gpio.h. +*/ + +#ifndef _DT_BINDINGS_GPIO_TEGRA256_GPIO_H +#define _DT_BINDINGS_GPIO_TEGRA256_GPIO_H + +#include <dt-bindings/gpio/gpio.h> + +/* GPIOs implemented by main GPIO controller */ +#define TEGRA256_MAIN_GPIO_PORT_A 0 +#define TEGRA256_MAIN_GPIO_PORT_B 1 +#define TEGRA256_MAIN_GPIO_PORT_C 2 +#define TEGRA256_MAIN_GPIO_PORT_D 3 + +#define TEGRA256_MAIN_GPIO (port, offset) \ + ((TEGRA256_MAIN_GPIO_PORT_##port * 8) + (offset)) + +#endif +
Signature · 1 line
2.17.1
PATCH 2/2 gpio: tegra186: Add support for Tegra256
Extend the existing Tegra186 GPIO controller driver with support for the GPIO controller found on Tegra256. While the programming model remains the same, the number of pins has slightly changed.
--- drivers/gpio/gpio-tegra186.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
drivers/gpio/gpio-tegra186.c +28 -0
@@ -20,6 +20,7 @@#include <dt-bindings/gpio/tegra194-gpio.h> #include <dt-bindings/gpio/tegra234-gpio.h> #include <dt-bindings/gpio/tegra241-gpio.h> +#include <dt-bindings/gpio/tegra256-gpio.h> /* security registers */ #define TEGRA186_GPIO_CTL_SCR 0x0c
@@ -1274,6 +1275,30 @@ static const struct tegra_gpio_soc tegra241_aon_soc = { .has_vm_support = false, }; +#define TEGRA256_MAIN_GPIO_PORT (_name, _bank, _port, _pins) \ + [TEGRA256_MAIN_GPIO_PORT_##_name] = { \ + .name = #_name, \ + .bank = _bank, \ + .port = _port, \ + .pins = _pins, \ + } + +static const struct tegra_gpio_port tegra256_main_ports[] = { +TEGRA256_MAIN_GPIO_PORT (A ,0 ,0 ,8 ), +TEGRA256_MAIN_GPIO_PORT (B ,0 ,1 ,8 ), +TEGRA256_MAIN_GPIO_PORT (C ,0 ,2 ,8 ), +TEGRA256_MAIN_GPIO_PORT (D ,0 ,3 ,8 ), +}; + +static const struct tegra_gpio_soc tegra256_main_soc = { + .num_ports =ARRAY_SIZE (tegra256_main_ports), + .ports = tegra256_main_ports, + .name ="tegra256-gpio-main" , + .instance =1 , + .num_irqs_per_bank =8 , + .has_vm_support = true, +}; +static const struct of_device_id tegra186_gpio_of_match[] = { { .compatible ="nvidia,tegra186-gpio" ,
@@ -1293,6 +1318,9 @@ static const struct of_device_id tegra186_gpio_of_match[] = { }, { .compatible = "nvidia,tegra234-gpio-aon", .data = &tegra234_aon_soc + }, { + .compatible = "nvidia,tegra256-gpio", + .data = &tegra256_main_soc }, {/* sentinel */ }
Signature · 1 line
2.17.1
Jon Hunter
maintainerRe: [PATCH 2/2] gpio: tegra186: Add support for Tegra256
Quoted 35 lines · Prathamesh Shete
Extend the existing Tegra186 GPIO controller driver with support for the GPIO controller found on Tegra256. While the programming model remains the same, the number of pins has slightly changed.
Signed-off-by Prathamesh Shete <[email protected]>--- drivers/gpio/gpio-tegra186.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)drivers/gpio/gpio-tegra186.c +11
-0@@ -20,6 +20,7 @@#include <dt-bindings/gpio/tegra194-gpio.h> #include <dt-bindings/gpio/tegra234-gpio.h> #include <dt-bindings/gpio/tegra241-gpio.h> +#include <dt-bindings/gpio/tegra256-gpio.h> /* security registers */ #define TEGRA186_GPIO_CTL_SCR 0x0c@@ -1274,6 +1275,30 @@ static const struct tegra_gpio_soc tegra241_aon_soc = { .has_vm_support = false, }; +#define TEGRA256_MAIN_GPIO_PORT (_name, _bank, _port, _pins) \ + [TEGRA256_MAIN_GPIO_PORT_##_name] = { \ + .name = #_name, \ + .bank = _bank, \ + .port = _port, \ + .pins = _pins, \ + } + +static const struct tegra_gpio_port tegra256_main_ports[] = { +TEGRA256_MAIN_GPIO_PORT (A ,0 ,0 ,8 ),
drivers/gpio/gpio-tegra186.c static const struct tegra_gpio_soc tegra241_aon_soc = { · line 1297
Quoted 10 lines
drivers/gpio/gpio-tegra186.c +10
-0+TEGRA256_MAIN_GPIO_PORT (B ,0 ,1 ,8 ), +TEGRA256_MAIN_GPIO_PORT (C ,0 ,2 ,8 ), + TEGRA256_MAIN_GPIO_PORT(D, 0, 3, 8), +}; + +static const struct tegra_gpio_soc tegra256_main_soc = { + .num_ports =ARRAY_SIZE (tegra256_main_ports), + .ports = tegra256_main_ports, + .name ="tegra256-gpio-main" , + .instance = 1,
Shouldn't this be 0?
Jon
Signature · 1 line
nvpublic
Bartosz Golaszewski
AppliedFrom: Bartosz Golaszewski <[email protected]>
Quoted 4 lines · Prathamesh Shete
Extend the existing Tegra186 GPIO controller device tree bindings with support for the GPIO controller found on Tegra256. The number of pins is slightly different, but the programming model remains the same
Quoted 8 lines
Add a new header,
include/dt-bindings/gpio/tegra256-gpio.h, that defines port IDs as well as theTEGRA256_MAIN_GPIO()helper, both of which are used in conjunction to create a unique specifier for each pin. The OS can reconstruct the port ID and pin from these values to determine the register region for the corresponding GPIO. However, the OS does not use the macro definitions in this file.[...]
Applied, thanks!
[1/2] dt-bindings: gpio: Add Tegra256 support
https://git.kernel.org/brgl/linux/c/eef6dcbc52fa83c392a2f4a52845f347b233a584 [2/2] gpio: tegra186: Add support for Tegra256 https://git.kernel.org/brgl/linux/c/db12ee08726e55c8a1a70c2308f98d121d96edc6
Best regards,
Signature · 1 line
Bartosz Golaszewski <[email protected]>