Skip to contentSkip to conversation

ARM: dts: stm32: stm32mp151c-plyaqm: Use correct dai-format property

PATCH In review Jihed Chaibi 2 participants 2 messages Aug 30, 2025 – Sep 3, 2025

Subsystems (2)
Device tree bindings Arm STM32
lore
Share & tools
lore

Jihed Chaibi

author
#0 lore raw

PATCH 1/1 ARM: dts: stm32: stm32mp151c-plyaqm: Use correct dai-format property

The stm32-i2s binding inherits from the standard audio-graph-port schema for its 'port' subnode, audio-graph-port requires the use of the 'dai-format' property. The stm32mp151c-plyaqm dts file was using the non-standard name 'format'.

Correct the property name to 'dai-format' to fix the dtbs_check validation error.

Fixes 9365fa46be358 ("ARM: dts: stm32: Add Plymovent AQM devicetree")
Signed-off-by Jihed Chaibi <[email protected]>
---
 arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts +1 -1
index 39a3211c613..55fe916740d 100644
@@ -239,7 +239,7 @@ &i2s1 {
 
 	i2s1_port: port {
 		i2s1_endpoint: endpoint {
-			format = "i2s";
+			dai-format = "i2s";
 			mclk-fs = <256>;
 			remote-endpoint = <&codec_endpoint>;
 		};
Signature · 1 line
2.39.5
maintainer
#1 lore raw

Hi Jihed

Quoted 19 lines · Jihed Chaibi

The stm32-i2s binding inherits from the standard audio-graph-port schema for its 'port' subnode, audio-graph-port requires the use of the 'dai-format' property. The stm32mp151c-plyaqm dts file was using the non-standard name 'format'.

Correct the property name to 'dai-format' to fix the dtbs_check validation error.

Fixes 9365fa46be358 ("ARM: dts: stm32: Add Plymovent AQM devicetree")
Signed-off-by Jihed Chaibi <[email protected]>
---
  arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts +0 -0
index 39a3211c613..55fe916740d 100644

arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts &i2s1 { · line 245

Quoted 8 lines
arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts +1 -1
@@ -239,7 +239,7 @@ &i2s1 {
 
  	i2s1_port: port {
  		i2s1_endpoint: endpoint {
-			format = "i2s";
+			dai-format = "i2s";
  			mclk-fs = <256>;
  			remote-endpoint = <&codec_endpoint>;
  		};

Applied on stm32-next.

Thanks
Alex