FAILED: patch "[PATCH] phy: ti: omap-usb2: fix device leak at unbind" failed to apply to 5.15-stable tree
Subsystems (2)
[email protected]
maintainerThe patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-5.15.y
git checkout FETCH_HEAD
git cherry-pick -x 64961557efa1b98f375c0579779e7eeda1a02c42
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2025091751-nuzzle-jolt-dcac@gregkh' --subject-prefix 'PATCH 5.15.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 64961557efa1b98f375c0579779e7eeda1a02c42 Mon Sep 17 00:00:00 2001
From: Johan Hovold <[email protected]>
Date: Thu, 24 Jul 2025 15:12:05 +0200
Subject: [PATCH] phy: ti: omap-usb2: fix device leak at unbind
Make sure to drop the reference to the control device taken by of_find_device_by_node() during probe when the driver is unbound.
drivers/phy/ti/phy-omap-usb2.c +13 -0
@@ -363,6 +363,13 @@ static void omap_usb2_init_errata(struct omap_usb *phy) phy->flags |=OMAP_USB2_DISABLE_CHRG_DET ; } +static void omap_usb2_put_device (void *_dev) +{ +struct device *dev = _dev; + +put_device (dev); +} +static int omap_usb2_probe (struct platform_device *pdev) {struct omap_usb *phy;
@@ -373,6 +380,7 @@ static int omap_usb2_probe(struct platform_device *pdev)struct device_node *control_node;struct platform_device *control_pdev;const struct usb_phy_data *phy_data; +int ret; phy_data =device_get_match_data (&pdev->dev);if (!phy_data)
@@ -423,6 +431,11 @@ static int omap_usb2_probe(struct platform_device *pdev)return -EINVAL ; } phy->control_dev = &control_pdev->dev; + + ret =devm_add_action_or_reset (&pdev->dev, omap_usb2_put_device, + phy->control_dev); +if (ret) +return ret; }else { if (of_property_read_u32_index(node, "syscon-phy-power", 1,
Sasha Levin
maintainerPATCH 1/3 phy: broadcom: ns-usb3: fix Wvoid-pointer-to-enum-cast warning
From: Krzysztof Kozlowski <[email protected]>
[ Upstream commit bd6e74a2f0a0c76dda8e44d26f9b91a797586c3b ]
'family' is an enum, thus cast of pointer on 64-bit compile test with W=1 causes:
drivers/phy/broadcom/phy-bcm-ns-usb3.c:209:17: error: cast to smaller integer type 'enum bcm_ns_family' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Stable-dep-of: 64961557efa1 ("phy: ti: omap-usb2: fix device leak at unbind")
--- drivers/phy/broadcom/phy-bcm-ns-usb3.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/phy/broadcom/phy-bcm-ns-usb3.c +1 -1
@@ -206,7 +206,7 @@ static int bcm_ns_usb3_mdio_probe(struct mdio_device *mdiodev) of_id =of_match_device (bcm_ns_usb3_id_table, dev);if (!of_id)return -EINVAL ; - usb3->family = (enum bcm_ns_family )of_id->data; + usb3->family = (uintptr_t )of_id->data; syscon_np =of_parse_phandle (dev->of_node,"usb3-dmp-syscon" ,0 ); err =of_address_to_resource (syscon_np,0 , &res);
Signature · 1 line
2.51.0
Sasha Levin
maintainerPATCH 2/3 phy: Use device_get_match_data()
From: Rob Herring <[email protected]>
[ Upstream commit 21bf6fc47a1e45031ba8a7084343b7cfd09ed1d3 ]
Use preferred device_get_match_data() instead of of_match_device() to get the driver match data. With this, adjust the includes to explicitly include the correct headers.
Stable-dep-of: 64961557efa1 ("phy: ti: omap-usb2: fix device leak at unbind")
--- drivers/phy/broadcom/phy-bcm-ns-usb3.c | 9 +++------ drivers/phy/marvell/phy-berlin-usb.c | 7 +++---- drivers/phy/ralink/phy-ralink-usb.c | 10 +++------- drivers/phy/rockchip/phy-rockchip-pcie.c | 11 ++++------- drivers/phy/rockchip/phy-rockchip-usb.c | 10 +++------- drivers/phy/ti/phy-omap-control.c | 9 ++------- drivers/phy/ti/phy-omap-usb2.c | 11 ++++------- drivers/phy/ti/phy-ti-pipe3.c | 14 ++++---------- 8 files changed, 26 insertions(+), 55 deletions(-)
drivers/phy/broadcom/phy-bcm-ns-usb3.c +3 -6
@@ -16,10 +16,11 @@#include <linux/iopoll.h> #include <linux/mdio.h> #include <linux/module.h> +#include <linux/of.h> #include <linux/of_address.h> -#include <linux/of_platform.h> #include <linux/platform_device.h> #include <linux/phy/phy.h> +#include <linux/property.h> #include <linux/slab.h> #define BCM_NS_USB3_PHY_BASE_ADDR_REG 0x1f
@@ -189,7 +190,6 @@ static int bcm_ns_usb3_mdio_phy_write(struct bcm_ns_usb3 *usb3, u16 reg,static int bcm_ns_usb3_mdio_probe (struct mdio_device *mdiodev) {struct device *dev = &mdiodev->dev; -const struct of_device_id *of_id;struct phy_provider *phy_provider;struct device_node *syscon_np;struct bcm_ns_usb3 *usb3;
@@ -203,10 +203,7 @@ static int bcm_ns_usb3_mdio_probe(struct mdio_device *mdiodev) usb3->dev = dev; usb3->mdiodev = mdiodev; - of_id =of_match_device (bcm_ns_usb3_id_table, dev); -if (!of_id) -return -EINVAL ; - usb3->family = (uintptr_t )of_id->data; + usb3->family = (enum bcm_ns_family )device_get_match_data (dev); syscon_np =of_parse_phandle (dev->of_node,"usb3-dmp-syscon" ,0 ); err =of_address_to_resource (syscon_np,0 , &res);
drivers/phy/marvell/phy-berlin-usb.c +3 -4
@@ -8,9 +8,10 @@#include <linux/io.h> #include <linux/module.h> -#include <linux/of_device.h> +#include <linux/of.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/reset.h> #define USB_PHY_PLL 0x04
@@ -162,8 +163,6 @@ MODULE_DEVICE_TABLE(of, phy_berlin_usb_of_match);static int phy_berlin_usb_probe (struct platform_device *pdev) { -const struct of_device_id *match = -of_match_device (phy_berlin_usb_of_match, &pdev->dev);struct phy_berlin_usb_priv *priv;struct phy *phy;struct phy_provider *phy_provider;
@@ -180,7 +179,7 @@ static int phy_berlin_usb_probe(struct platform_device *pdev)if (IS_ERR (priv->rst_ctrl))return PTR_ERR (priv->rst_ctrl); - priv->pll_divider = *((u32 *)match->data); + priv->pll_divider = *((u32 *)device_get_match_data (&pdev->dev)); phy =devm_phy_create (&pdev->dev,NULL , &phy_berlin_usb_ops);if (IS_ERR (phy)) {
drivers/phy/ralink/phy-ralink-usb.c +3 -7
@@ -13,9 +13,10 @@#include <linux/mfd/syscon.h> #include <linux/module.h> #include <linux/mutex.h> -#include <linux/of_platform.h> +#include <linux/of.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> +#include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/reset.h>
@@ -171,18 +172,13 @@ static int ralink_usb_phy_probe(struct platform_device *pdev) {struct device *dev = &pdev->dev;struct phy_provider *phy_provider; -const struct of_device_id *match;struct ralink_usb_phy *phy; - match =of_match_device (ralink_usb_phy_of_match, &pdev->dev); -if (!match) -return -ENODEV ; - phy =devm_kzalloc (dev,sizeof (*phy),GFP_KERNEL );if (!phy)return -ENOMEM ; - phy->clk = (uintptr_t )match->data; + phy->clk = (uintptr_t )device_get_match_data (&pdev->dev); phy->base =NULL ; phy->sysctl =syscon_regmap_lookup_by_phandle (dev->of_node,"ralink,sysctl" );
drivers/phy/rockchip/phy-rockchip-pcie.c +4 -7
@@ -12,10 +12,9 @@#include <linux/mfd/syscon.h> #include <linux/module.h> #include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_platform.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/regmap.h> #include <linux/reset.h>
@@ -63,7 +62,7 @@ struct rockchip_pcie_data { };struct rockchip_pcie_phy { -struct rockchip_pcie_data *phy_data; +const struct rockchip_pcie_data *phy_data;struct regmap *reg_base;struct phy_pcie_instance {struct phy *phy;
@@ -365,7 +364,6 @@ static int rockchip_pcie_phy_probe(struct platform_device *pdev)struct rockchip_pcie_phy *rk_phy;struct phy_provider *phy_provider;struct regmap *grf; -const struct of_device_id *of_id;int i;u32 phy_num;
@@ -379,11 +377,10 @@ static int rockchip_pcie_phy_probe(struct platform_device *pdev)if (!rk_phy)return -ENOMEM ; - of_id =of_match_device (rockchip_pcie_phy_dt_ids, &pdev->dev); -if (!of_id) + rk_phy->phy_data =device_get_match_data (&pdev->dev); +if (!rk_phy->phy_data)return -EINVAL ; - rk_phy->phy_data = (struct rockchip_pcie_data *)of_id->data; rk_phy->reg_base = grf;mutex_init (&rk_phy->pcie_mutex);
drivers/phy/rockchip/phy-rockchip-usb.c +3 -7
@@ -13,10 +13,9 @@#include <linux/module.h> #include <linux/mutex.h> #include <linux/of.h> -#include <linux/of_address.h> -#include <linux/of_platform.h> #include <linux/phy/phy.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/regulator/consumer.h> #include <linux/reset.h> #include <linux/regmap.h>
@@ -458,7 +457,6 @@ static int rockchip_usb_phy_probe(struct platform_device *pdev)struct device *dev = &pdev->dev;struct rockchip_usb_phy_base *phy_base;struct phy_provider *phy_provider; -const struct of_device_id *match;struct device_node *child;int err;
@@ -466,14 +464,12 @@ static int rockchip_usb_phy_probe(struct platform_device *pdev)if (!phy_base)return -ENOMEM ; - match =of_match_device (dev->driver->of_match_table, dev); -if (!match || !match->data) { + phy_base->pdata =device_get_match_data (dev); +if (!phy_base->pdata) {dev_err (dev,"missing phy data\n" );return -EINVAL ; } - phy_base->pdata = match->data; - phy_base->dev = dev; phy_base->reg_base =ERR_PTR (-ENODEV );if (dev->parent && dev->parent->of_node)
drivers/phy/ti/phy-omap-control.c +2 -7
@@ -8,9 +8,9 @@#include <linux/module.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/slab.h> #include <linux/of.h> -#include <linux/of_device.h> #include <linux/err.h> #include <linux/io.h> #include <linux/clk.h>
@@ -268,20 +268,15 @@ MODULE_DEVICE_TABLE(of, omap_control_phy_id_table);static int omap_control_phy_probe (struct platform_device *pdev) { -const struct of_device_id *of_id;struct omap_control_phy *control_phy; - of_id =of_match_device (omap_control_phy_id_table, &pdev->dev); -if (!of_id) -return -EINVAL ; - control_phy =devm_kzalloc (&pdev->dev,sizeof (*control_phy),GFP_KERNEL );if (!control_phy)return -ENOMEM ; control_phy->dev = &pdev->dev; - control_phy->type = *(enum omap_control_phy_type *)of_id->data; + control_phy->type = *(enum omap_control_phy_type *)device_get_match_data (&pdev->dev);if (control_phy->type ==OMAP_CTRL_TYPE_OTGHS ) { control_phy->otghs_control =
drivers/phy/ti/phy-omap-usb2.c +4 -7
@@ -19,6 +19,7 @@#include <linux/phy/phy.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> +#include <linux/property.h> #include <linux/regmap.h> #include <linux/slab.h> #include <linux/sys_soc.h>
@@ -371,16 +372,12 @@ static int omap_usb2_probe(struct platform_device *pdev)struct device_node *node = pdev->dev.of_node;struct device_node *control_node;struct platform_device *control_pdev; -const struct of_device_id *of_id; -struct usb_phy_data *phy_data; +const struct usb_phy_data *phy_data; - of_id =of_match_device (omap_usb2_id_table, &pdev->dev); - -if (!of_id) + phy_data =device_get_match_data (&pdev->dev); +if (!phy_data)return -EINVAL ; - phy_data = (struct usb_phy_data *)of_id->data; - phy =devm_kzalloc (&pdev->dev,sizeof (*phy),GFP_KERNEL );if (!phy)return -ENOMEM ;
drivers/phy/ti/phy-ti-pipe3.c +4 -10
@@ -8,6 +8,7 @@#include <linux/module.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/slab.h> #include <linux/phy/phy.h> #include <linux/of.h>
@@ -777,23 +778,16 @@ static int ti_pipe3_probe(struct platform_device *pdev)struct phy_provider *phy_provider;struct device *dev = &pdev->dev;int ret; -const struct of_device_id *match; -struct pipe3_data *data; +const struct pipe3_data *data; phy =devm_kzalloc (dev,sizeof (*phy),GFP_KERNEL );if (!phy)return -ENOMEM ; - match =of_match_device (ti_pipe3_id_table, dev); -if (!match) + data =device_get_match_data (dev); +if (!data)return -EINVAL ; - data = (struct pipe3_data *)match->data; -if (!data) { -dev_err (dev,"no driver data\n" ); -return -EINVAL ; - } - phy->dev = dev; phy->mode = data->mode; phy->dpll_map = data->dpll_map;
Signature · 1 line
2.51.0
Sasha Levin
maintainerPATCH 3/3 phy: ti: omap-usb2: fix device leak at unbind
In reply to Sasha LevinFrom: Johan Hovold <[email protected]>
[ Upstream commit 64961557efa1b98f375c0579779e7eeda1a02c42 ]
Make sure to drop the reference to the control device taken by of_find_device_by_node() during probe when the driver is unbound.
--- drivers/phy/ti/phy-omap-usb2.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
drivers/phy/ti/phy-omap-usb2.c +13 -0
@@ -363,6 +363,13 @@ static void omap_usb2_init_errata(struct omap_usb *phy) phy->flags |=OMAP_USB2_DISABLE_CHRG_DET ; } +static void omap_usb2_put_device (void *_dev) +{ +struct device *dev = _dev; + +put_device (dev); +} +static int omap_usb2_probe (struct platform_device *pdev) {struct omap_usb *phy;
@@ -373,6 +380,7 @@ static int omap_usb2_probe(struct platform_device *pdev)struct device_node *control_node;struct platform_device *control_pdev;const struct usb_phy_data *phy_data; +int ret; phy_data =device_get_match_data (&pdev->dev);if (!phy_data)
@@ -423,6 +431,11 @@ static int omap_usb2_probe(struct platform_device *pdev)return -EINVAL ; } phy->control_dev = &control_pdev->dev; + + ret =devm_add_action_or_reset (&pdev->dev, omap_usb2_put_device, + phy->control_dev); +if (ret) +return ret; }else { if (of_property_read_u32_index(node, "syscon-phy-power", 1,
Signature · 1 line
2.51.0