Skip to contentSkip to conversation

mfd: macsmc: add rtc, hwmon and hid subdevices

PATCH Superseded James Calligeros 5 participants 20 messages Oct 7, 2025 – Oct 16, 2025

Subsystems (8)

v3 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

v3 cover mfd: macsmc: add rtc, hwmon and hid subdevices

Hi all,

This series adds support for the remaining SMC subdevices. These are the RTC, hwmon, and HID devices. They are being submitted together as the RTC and hwmon drivers both require changes to the SMC DT schema.

The RTC driver is responsible for getting and setting the system clock, and requires an NVMEM cell. This series replaces Sven's original RTC driver submission [1].

The hwmon function is an interesting one. While each Apple Silicon device exposes pretty similar sets of sensors, these all seem to be paired to different SMC keys in the firmware interface. This is true even when the sensors are on the SoC. For example, an M1 MacBook Pro will use different keys to access the LITTLE core temperature sensors to an M1 Mac mini. This necessitates describing which keys correspond to which sensors for each device individually, and populating the hwmon structs at runtime. We do this with a node in the device tree. This series includes only the keys for sensors which we know to be common to all devices. The SMC is also responsible for monitoring and controlling fan speeds on systems with fans, which we expose via the hwmon driver.

The SMC also handles the hardware power button and lid switch. Power button presses and lid opening/closing are emitted as HID events, so we add an input subdevice to handle them.

This series originally cherry-picked three Devicetree commits to build cleanly, however these have now been merged and were dropped.

Regards,

James

[1] https://lore.kernel.org/asahi/CAEg-Je84XxLWH7vznQmPRfjf6GxWOu75ZetwN7AdseAwfMLLrQ@mail.gmail.com/T/#t

---
Changes in v3:
- Renamed macsmc-hid to macsmc-input
- Switched to pm_wakeup_event in macsmc-input
- macsmc-input now configures its capabilities before registering the device
- Renamed macsmc_hwmon to macsmc-hwmon
- Dropped module aliases in macsmc-input and macsmc_hwmon
- Introduced new SMC FourCC macro to silence GCC errors
- Condensed hwmon binding using $defs
- Made label property optional for hwmon sensors
- Fixed incorrect hwmon is_visible implementation
- Dropped 64-bit math from SMC float ops
- Fixed incorrect use of error numbers in hwmon driver
- Replaced a number of non-fatal dev_errs with dev_dbgs in hwmon driver
- Added hwmon driver documentation
- Added hwmon subdevice directly to the DT SMC node
- Included "common" hwmon sensors in SoC .dtsi files
- Fixed typo in hwmon-common.dtsi
- Added Neal's R-b to series
- Added required nodes to t602x Devicetrees
- Link to v2: https://lore.kernel.org/r/[email protected]

Changes in v2:
- Added Rob's R-b tag to RTC DT binding
- Removed redundant nesting from hwmon DT binding
- Dedpulicated property definitions in hwmon DT schema
- Made label a required property for hwmon DT nodes
- Clarified semantics in hwmon DT schema definitions
- Split mfd tree changes into separate commits
- Fixed numerous style errors in hwmon driver
- Removed log messages sysfs read/write functions in hwmon driver
- Removed ignored errors from hwmon driver
- Removed uses of dev_err for non-errors in hwmon driver
- Made it more obvious that a number of hwmon fan properties are optional
- Modified hwmon driver to reflect DT schema changes
- Added compatible property to hwmon node
- Link to v1: https://lore.kernel.org/r/[email protected]

---
Hector Martin (2):
rtc: Add new rtc-macsmc driver for Apple Silicon Macs
input: macsmc-input: New driver to handle the Apple Mac SMC buttons/lid

James Calligeros (9):
dt-bindings: hwmon: Add Apple System Management Controller hwmon schema
mfd: macsmc: Wire up Apple SMC RTC subdevice
mfd: macsmc: add new __SMC_KEY macro
hwmon: Add Apple Silicon SMC hwmon driver
mfd: macsmc: Wire up Apple SMC hwmon subdevice
mfd: macsmc: Wire up Apple SMC input subdevice
arm64: dts: apple: t8103, t8112, t60xx: add hwmon SMC subdevice
arm64: dts: apple: Add common hwmon sensors and fans
arm64: dts: apple: t8103, t60xx, t8112: Add common hwmon nodes to devices

Sven Peter (2):
dt-bindings: rtc: Add Apple SMC RTC
arm64: dts: apple: t8103,t60xx,t8112: Add SMC RTC node

 .../bindings/hwmon/apple,smc-hwmon.yaml  |  86 +++
 .../bindings/mfd/apple,smc.yaml          |  45 ++
 .../bindings/rtc/apple,smc-rtc.yaml      |  35 +
 Documentation/hwmon/macsmc-hwmon.rst     |  71 +++
 MAINTAINERS                              |   6 +
 .../boot/dts/apple/hwmon-common.dtsi     |  33 +
 .../boot/dts/apple/hwmon-fan-dual.dtsi   |  22 +
 arch/arm64/boot/dts/apple/hwmon-fan.dtsi |  17 +
 .../boot/dts/apple/hwmon-laptop.dtsi     |  33 +
 .../boot/dts/apple/hwmon-mac-mini.dtsi   |  15 +
 .../arm64/boot/dts/apple/t6001-j375c.dts |   2 +
 arch/arm64/boot/dts/apple/t6001.dtsi     |   2 +
 .../arm64/boot/dts/apple/t6002-j375d.dts |   2 +
 .../arm64/boot/dts/apple/t600x-die0.dtsi |  10 +
 .../boot/dts/apple/t600x-j314-j316.dtsi  |   3 +
 .../arm64/boot/dts/apple/t602x-die0.dtsi |  10 +
 arch/arm64/boot/dts/apple/t8103-j274.dts |   2 +
 arch/arm64/boot/dts/apple/t8103-j293.dts |   3 +
 arch/arm64/boot/dts/apple/t8103-j313.dts |   2 +
 arch/arm64/boot/dts/apple/t8103-j456.dts |   2 +
 arch/arm64/boot/dts/apple/t8103-j457.dts |   2 +
 arch/arm64/boot/dts/apple/t8103.dtsi     |  11 +
 arch/arm64/boot/dts/apple/t8112-j413.dts |   2 +
 arch/arm64/boot/dts/apple/t8112-j473.dts |   2 +
 arch/arm64/boot/dts/apple/t8112-j493.dts |   3 +
 arch/arm64/boot/dts/apple/t8112.dtsi     |  11 +
 drivers/hwmon/Kconfig                    |  12 +
 drivers/hwmon/Makefile                   |   1 +
 drivers/hwmon/macsmc-hwmon.c             | 850 +++++++++++++++++++++++++
 drivers/input/misc/Kconfig               |  11 +
 drivers/input/misc/Makefile              |   1 +
 drivers/input/misc/macsmc-input.c        | 208 ++++++
 drivers/mfd/macsmc.c                     |   3 +
 drivers/rtc/Kconfig                      |  11 +
 drivers/rtc/Makefile                     |   1 +
 drivers/rtc/rtc-macsmc.c                 | 141 ++++
 include/linux/mfd/macsmc.h               |   1 +
 37 files changed, 1672 insertions(+)

---
base-commit: c746c3b5169831d7fb032a1051d8b45592ae8d78
change-id: 20250816-macsmc-subdevs-87032c017d0c

Best regards,

Signature · 1 line
James Calligeros <[email protected]>
#1 lore raw

PATCH v3 1/13 dt-bindings: rtc: Add Apple SMC RTC

From: Sven Peter <[email protected]>

Apple Silicon Macs (M1, etc.) have an RTC that is part of the PMU IC, but most of the PMU functionality is abstracted out by the SMC. An additional RTC offset stored inside NVMEM is required to compute the current date/time.

---
 .../bindings/mfd/apple,smc.yaml          |  9 +++++++
 .../bindings/rtc/apple,smc-rtc.yaml      | 35 +++++++++++++++++++++++++
 MAINTAINERS                              |  1 +
 3 files changed, 45 insertions(+)
Documentation/devicetree/bindings/mfd/apple,smc.yaml +9 -0
index 5429538f7e2e..0410e712c900 100644
@@ -46,6 +46,9 @@ properties:
   reboot:
     $ref: /schemas/power/reset/apple,smc-reboot.yaml
 
+  rtc:
+    $ref: /schemas/rtc/apple,smc-rtc.yaml
+
 additionalProperties: false
 
 required:
@@ -80,5 +83,11 @@ examples:
           nvmem-cell-names = "shutdown_flag", "boot_stage",
                              "boot_error_count", "panic_count";
         };
+
+        rtc {
+          compatible = "apple,smc-rtc";
+          nvmem-cells = <&rtc_offset>;
+          nvmem-cell-names = "rtc_offset";
+       };
       };
     };
Documentation/devicetree/bindings/rtc/apple,smc-rtc.yaml new file +35 -0
new file mode 100644
index 000000000000..607b610665a2
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/apple,smc-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SMC RTC
+
+description:
+  Apple Silicon Macs (M1, etc.) have an RTC that is part of the PMU IC,
+  but most of the PMU functionality is abstracted out by the SMC.
+  An additional RTC offset stored inside NVMEM is required to compute
+  the current date/time.
+
+maintainers:
+  - Sven Peter <[email protected]>
+
+properties:
+  compatible:
+    const: apple,smc-rtc
+
+  nvmem-cells:
+    items:
+      - description: 48bit RTC offset, specified in 32768 (2^15) Hz clock ticks
+
+  nvmem-cell-names:
+    items:
+      - const: rtc_offset
+
+required:
+  - compatible
+  - nvmem-cells
+  - nvmem-cell-names
+
+additionalProperties: false
MAINTAINERS +1 -0
index b45db73e55df..745d85b66365 100644
@@ -2435,6 +2435,7 @@ F:	Documentation/devicetree/bindings/pinctrl/apple,pinctrl.yaml
 F:	Documentation/devicetree/bindings/power/apple*
 F:	Documentation/devicetree/bindings/power/reset/apple,smc-reboot.yaml
 F:	Documentation/devicetree/bindings/pwm/apple,s5l-fpwm.yaml
+F:	Documentation/devicetree/bindings/rtc/apple,smc-rtc.yaml
 F:	Documentation/devicetree/bindings/spi/apple,spi.yaml
 F:	Documentation/devicetree/bindings/spmi/apple,spmi.yaml
 F:	Documentation/devicetree/bindings/watchdog/apple,wdt.yaml
Signature · 1 line
2.51.0
#2 lore raw

PATCH v3 2/13 dt-bindings: hwmon: Add Apple System Management Controller hwmon schema

In reply to James Calligeros

Apple Silicon devices integrate a vast array of sensors, monitoring current, power, temperature, and voltage across almost every part of the system. The sensors themselves are all connected to the System Management Controller (SMC). The SMC firmware exposes the data reported by these sensors via its standard FourCC-based key-value API. The SMC is also responsible for monitoring and controlling any fans connected to the system, exposing them in the same way.

For reasons known only to Apple, each device exposes its sensors with an almost totally unique set of keys. This is true even for devices which share an SoC. An M1 Mac mini, for example, will report its core temperatures on different keys to an M1 MacBook Pro. Worse still, the SMC does not provide a way to enumerate the available keys at runtime, nor do the keys follow any sort of reasonable or consistent naming rules that could be used to deduce their purpose. We must therefore know which keys are present on any given device, and which function they serve, ahead of time.

Add a schema so that we can describe the available sensors for a given Apple Silicon device in the Devicetree.

---
 .../bindings/hwmon/apple,smc-hwmon.yaml  | 86 +++++++++++++++++++++++++
 .../bindings/mfd/apple,smc.yaml          | 36 +++++++++++
 MAINTAINERS                              |  1 +
 3 files changed, 123 insertions(+)
Documentation/devicetree/bindings/hwmon/apple,smc-hwmon.yaml new file +86 -0
new file mode 100644
index 000000000000..2eec317bc4b3
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/apple,smc-hwmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Apple SMC Hardware Monitoring
+
+description:
+  Apple's System Management Controller (SMC) exposes a vast array of
+  hardware monitoring sensors, including temperature probes, current and
+  voltage sense, power meters, and fan speeds. It also provides endpoints
+  to manually control the speed of each fan individually. Each Apple
+  Silicon device exposes a different set of endpoints via SMC keys. This
+  is true even when two machines share an SoC. The CPU core temperature
+  sensor keys on an M1 Mac mini are different to those on an M1 MacBook
+  Pro, for example.
+
+maintainers:
+  - James Calligeros <[email protected]>
+
+$defs:
+  sensor:
+    type: object
+
+    properties:
+      apple,key-id:
+        $ref: /schemas/types.yaml#/definitions/string
+        pattern: "^[A-Za-z0-9]{4}$"
+        description: The SMC FourCC key of the desired sensor.
+          Must match the node's suffix.
+
+      label:
+        description: Human-readable name for the sensor
+
+    required:
+      - apple,key-id
+
+properties:
+  compatible:
+    const: apple,smc-hwmon
+
+patternProperties:
+  "^current-[A-Za-z0-9]{4}$":
+    $ref: "#/$defs/sensor"
+    unevaluatedProperties: false
+
+  "^fan-[A-Za-z0-9]{4}$":
+    $ref: "#/$defs/sensor"
+    unevaluatedProperties: false
+
+    properties:
+      apple,fan-minimum:
+        $ref: /schemas/types.yaml#/definitions/string
+        pattern: "^[A-Za-z0-9]{4}$"
+        description: SMC key containing the fan's minimum speed
+
+      apple,fan-maximum:
+        $ref: /schemas/types.yaml#/definitions/string
+        pattern: "^[A-Za-z0-9]{4}$"
+        description: SMC key containing the fan's maximum speed
+
+      apple,fan-target:
+        $ref: /schemas/types.yaml#/definitions/string
+        pattern: "^[A-Za-z0-9]{4}$"
+        description: Writeable endpoint for setting desired fan speed
+
+      apple,fan-mode:
+        $ref: /schemas/types.yaml#/definitions/string
+        pattern: "^[A-Za-z0-9]{4}$"
+        description: Writeable key to enable/disable manual fan control
+
+
+  "^power-[A-Za-z0-9]{4}$":
+    $ref: "#/$defs/sensor"
+    unevaluatedProperties: false
+
+  "^temperature-[A-Za-z0-9]{4}$":
+    $ref: "#/$defs/sensor"
+    unevaluatedProperties: false
+
+  "^voltage-[A-Za-z0-9]{4}$":
+    $ref: "#/$defs/sensor"
+    unevaluatedProperties: false
+
+additionalProperties: false
Documentation/devicetree/bindings/mfd/apple,smc.yaml +36 -0
index 0410e712c900..34ce048619f5 100644
@@ -49,6 +49,9 @@ properties:
   rtc:
     $ref: /schemas/rtc/apple,smc-rtc.yaml
 
+  hwmon:
+    $ref: /schemas/hwmon/apple,smc-hwmon.yaml
+
 additionalProperties: false
 
 required:
@@ -89,5 +92,38 @@ examples:
           nvmem-cells = <&rtc_offset>;
           nvmem-cell-names = "rtc_offset";
        };
+
+        hwmon {
+          compatible = "apple,smc-hwmon";
+
+          current-ID0R {
+            apple,key-id = "ID0R";
+            label = "AC Input Current";
+          };
+
+          fan-F0Ac {
+            apple,key-id = "F0Ac";
+            apple,fan-minimum = "F0Mn";
+            apple,fan-maximum = "F0Mx";
+            apple,fan-target = "F0Tg";
+            apple,fan-mode = "F0Md";
+            label = "Fan 1";
+          };
+
+          power-PSTR {
+            apple,key-id = "PSTR";
+            label = "Total System Power";
+          };
+
+          temperature-TW0P {
+            apple,key-id = "TW0P";
+            label = "WiFi/BT Module Temperature";
+          };
+
+          voltage-VD0R {
+            apple,key-id = "VD0R";
+            label = "AC Input Voltage";
+          };
+        };
       };
     };
MAINTAINERS +1 -0
index 745d85b66365..10f4c0034b5e 100644
@@ -2418,6 +2418,7 @@ F:	Documentation/devicetree/bindings/cpufreq/apple,cluster-cpufreq.yaml
 F:	Documentation/devicetree/bindings/dma/apple,admac.yaml
 F:	Documentation/devicetree/bindings/gpio/apple,smc-gpio.yaml
 F:	Documentation/devicetree/bindings/gpu/apple,agx.yaml
+F:	Documentation/devicetree/bindings/hwmon/apple,smc-hwmon.yaml
 F:	Documentation/devicetree/bindings/i2c/apple,i2c.yaml
 F:	Documentation/devicetree/bindings/input/touchscreen/apple,z2-multitouch.yaml
 F:	Documentation/devicetree/bindings/interrupt-controller/apple,*
Signature · 1 line
2.51.0
#4 lore raw

PATCH v3 3/13 rtc: Add new rtc-macsmc driver for Apple Silicon Macs

In reply to James Calligeros

From: Hector Martin <[email protected]>

Apple Silicon Macs (M1, etc.) have an RTC that is part of the PMU IC, but most of the PMU functionality is abstracted out by the SMC. On T600x machines, the RTC counter must be accessed via the SMC to get full functionality, and it seems likely that future machines will move towards making SMC handle all RTC functionality.

The SMC RTC counter access is implemented on all current machines as of the time of this writing, on firmware 12.x. However, the RTC offset (needed to set the time) is still only accessible via direct PMU access. To handle this, we expose the RTC offset as an NVMEM cell from the SPMI PMU device node, and this driver consumes that cell and uses it to compute/set the current time.

---
 MAINTAINERS              |   1 +
 drivers/rtc/Kconfig      |  11 ++
 drivers/rtc/Makefile     |   1 +
 drivers/rtc/rtc-macsmc.c | 141 +++++++++++++++++++++++++
 4 files changed, 154 insertions(+)
MAINTAINERS +1 -0
index 10f4c0034b5e..3c6322872dd1 100644
@@ -2460,6 +2460,7 @@ F:	drivers/nvmem/apple-spmi-nvmem.c
 F:	drivers/pinctrl/pinctrl-apple-gpio.c
 F:	drivers/power/reset/macsmc-reboot.c
 F:	drivers/pwm/pwm-apple.c
+F:	drivers/rtc/rtc-macsmc.c
 F:	drivers/soc/apple/*
 F:	drivers/spi/spi-apple.c
 F:	drivers/spmi/spmi-apple-controller.c
drivers/rtc/Kconfig +11 -0
index 4a8dc8d0a4b7..e165301d4abb 100644
@@ -2078,6 +2078,17 @@ config RTC_DRV_WILCO_EC
 	  This can also be built as a module. If so, the module will
 	  be named "rtc_wilco_ec".
 
+config RTC_DRV_MACSMC
+	tristate "Apple Mac System Management Controller RTC"
+	depends on MFD_MACSMC
+	help
+	  If you say yes here you get support for RTC functions
+	  inside Apple SPMI PMUs accessed through the SoC's
+	  System Management Controller
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rtc-macsmc.
+
 config RTC_DRV_MSC313
 	tristate "MStar MSC313 RTC"
         depends on ARCH_MSTARV7 || COMPILE_TEST
drivers/rtc/Makefile +1 -0
index 610a9ee5fd33..32083bd5bb81 100644
@@ -93,6 +93,7 @@ obj-$(CONFIG_RTC_DRV_M48T35)	+= rtc-m48t35.o
 obj-$(CONFIG_RTC_DRV_M48T59)	+= rtc-m48t59.o
 obj-$(CONFIG_RTC_DRV_M48T86)	+= rtc-m48t86.o
 obj-$(CONFIG_RTC_DRV_MA35D1)	+= rtc-ma35d1.o
+obj-$(CONFIG_RTC_DRV_MACSMC)	+= rtc-macsmc.o
 obj-$(CONFIG_RTC_DRV_MAX31335)	+= rtc-max31335.o
 obj-$(CONFIG_RTC_DRV_MAX6900)	+= rtc-max6900.o
 obj-$(CONFIG_RTC_DRV_MAX6902)	+= rtc-max6902.o
drivers/rtc/rtc-macsmc.c new file +141 -0

141 lines not on this page · raw message

Signature · 1 line
2.51.0
#5 lore raw

PATCH v3 4/13 mfd: macsmc: Wire up Apple SMC RTC subdevice

In reply to James Calligeros

Add the new SMC RTC function to the mfd device

---
 drivers/mfd/macsmc.c | 1 +
 1 file changed, 1 insertion(+)
drivers/mfd/macsmc.c +1 -0
index e6cdae221f1d..500395bb48da 100644
@@ -47,6 +47,7 @@
 static const struct mfd_cell apple_smc_devs[] = {
 	MFD_CELL_OF("macsmc-gpio", NULL, NULL, 0, 0, "apple,smc-gpio"),
 	MFD_CELL_OF("macsmc-reboot", NULL, NULL, 0, 0, "apple,smc-reboot"),
+	MFD_CELL_OF("macsmc-rtc", NULL, NULL, 0, 0, "apple,smc-rtc"),
 };
 
 static int apple_smc_cmd_locked(struct apple_smc *smc, u64 cmd, u64 arg,
Signature · 1 line
2.51.0
#6 lore raw

PATCH v3 5/13 mfd: macsmc: add new __SMC_KEY macro

In reply to James Calligeros

When using the _SMC_KEY macro in switch/case statements, GCC 15.2.1 errors out with 'case label does not reduce to an integer constant'. Introduce a new __SMC_KEY macro that can be used instead.

---
 include/linux/mfd/macsmc.h | 1 +
 1 file changed, 1 insertion(+)
include/linux/mfd/macsmc.h +1 -0
index 6b13f01a8592..f6f80c33b5cf 100644
@@ -41,6 +41,7 @@ typedef u32 smc_key;
  */
 #define SMC_KEY(s) (smc_key)(_SMC_KEY(#s))
 #define _SMC_KEY(s) (((s)[0] << 24) | ((s)[1] << 16) | ((s)[2] << 8) | (s)[3])
+#define __SMC_KEY(a, b, c, d) (((u32)(a) << 24) | ((u32)(b) << 16) | ((u32)(c) << 8) | ((u32)(d)))
 
 #define APPLE_SMC_READABLE BIT(7)
 #define APPLE_SMC_WRITABLE BIT(6)
Signature · 1 line
2.51.0
#7 lore raw

PATCH v3 6/13 hwmon: Add Apple Silicon SMC hwmon driver

In reply to James Calligeros

The System Management Controller on Apple Silicon devices is responsible for integrating and exposing the data reported by the vast array of hardware monitoring sensors present on these devices. It is also responsible for fan control, and allows users to manually set fan speeds if they so desire. Add a hwmon driver to expose current, power, temperature, and voltage monitoring sensors, as well as fan speed monitoring and control via the SMC on Apple Silicon devices.

The SMC firmware has no consistency between devices, even when they share an SoC. The FourCC keys used to access sensors are almost random. An M1 Mac mini will have different FourCCs for its CPU core temperature sensors to an M1 MacBook Pro, for example. For this reason, the valid sensors for a given device are specified in a child of the SMC Devicetree node. The driver uses this information to determine which sensors to make available at runtime.

---
 Documentation/hwmon/macsmc-hwmon.rst |  71 +++
 MAINTAINERS                          |   2 +
 drivers/hwmon/Kconfig                |  12 +
 drivers/hwmon/Makefile               |   1 +
 drivers/hwmon/macsmc-hwmon.c         | 850 +++++++++++++++++++++++++
 5 files changed, 936 insertions(+)
Documentation/hwmon/macsmc-hwmon.rst new file +71 -0
new file mode 100644
index 000000000000..6903f76df62b
@@ -0,0 +1,71 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+Kernel driver macsmc-hwmon
+==========================
+
+Supported hardware
+
+    * Apple Silicon Macs (M1 and up)
+
+Author: James Calligeros <[email protected]>
+
+Description
+-----------
+
+macsmc-hwmon exposes the Apple System Management controller's
+temperature, voltage, current and power sensors, as well as
+fan speed and control capabilities, via hwmon.
+
+Because each Apple Silicon Mac exposes a different set of sensors
+(e.g. the MacBooks expose battery telemetry that is not present on
+the desktop Macs), sensors present on any given machine are described
+via Devicetree. The driver picks these up and registers them with
+hwmon when probed.
+
+Manual fan speed is supported via the fan_control module parameter. This
+is disabled by default and marked as unsafe, as it cannot be proven that
+the system will fail safe if overheating due to manual fan control being
+used.
+
+sysfs interface
+---------------
+
+currX_input
+    Ammeter value
+
+currX_label
+    Ammeter label
+
+fanX_input
+    Current fan speed
+
+fanX_label
+    Fan label
+
+fanX_min
+    Minimum possible fan speed
+
+fanX_max
+    Maximum possible fan speed
+
+fanX_target
+    Current fan setpoint
+
+inX_input
+    Voltmeter value
+
+inX_label
+    Voltmeter label
+
+powerX_input
+    Power meter value
+
+powerX_label
+    Power meter label
+
+tempX_input
+    Temperature sensor value
+
+tempX_label
+    Temperature sensor label
+
MAINTAINERS +2 -0
index 3c6322872dd1..79b9f40224a9 100644
@@ -2440,12 +2440,14 @@ F:	Documentation/devicetree/bindings/rtc/apple,smc-rtc.yaml
 F:	Documentation/devicetree/bindings/spi/apple,spi.yaml
 F:	Documentation/devicetree/bindings/spmi/apple,spmi.yaml
 F:	Documentation/devicetree/bindings/watchdog/apple,wdt.yaml
+F:	Documentation/hwmon/macsmc-hwmon.rst
 F:	arch/arm64/boot/dts/apple/
 F:	drivers/bluetooth/hci_bcm4377.c
 F:	drivers/clk/clk-apple-nco.c
 F:	drivers/cpufreq/apple-soc-cpufreq.c
 F:	drivers/dma/apple-admac.c
 F:	drivers/gpio/gpio-macsmc.c
+F:	drivers/hwmon/macsmc-hwmon.c
 F:	drivers/pmdomain/apple/
 F:	drivers/i2c/busses/i2c-pasemi-core.c
 F:	drivers/i2c/busses/i2c-pasemi-platform.c
drivers/hwmon/Kconfig +12 -0
index 2760feb9f83b..d6e9e39d2762 100644
@@ -1174,6 +1174,18 @@ config SENSORS_LTQ_CPUTEMP
 	  If you say yes here you get support for the temperature
 	  sensor inside your CPU.
 
+config SENSORS_MACSMC_HWMON
+	tristate "Apple SMC (Apple Silicon)"
+	depends on MFD_MACSMC && OF
+	help
+	  This driver enables hwmon support for current, power, temperature,
+	  and voltage sensors, as well as fan speed reporting and control
+	  on Apple Silicon devices. Say Y here if you have an Apple Silicon
+	  device.
+
+	  This driver can also be built as a module. If so, the module will
+	  be called macsmc-hwmon.
+
 config SENSORS_MAX1111
 	tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles"
 	depends on SPI_MASTER
drivers/hwmon/Makefile +1 -0
index 73b2abdcc6dd..f9c049ce9124 100644
@@ -148,6 +148,7 @@ obj-$(CONFIG_SENSORS_LTC4260)	+= ltc4260.o
 obj-$(CONFIG_SENSORS_LTC4261)	+= ltc4261.o
 obj-$(CONFIG_SENSORS_LTC4282)	+= ltc4282.o
 obj-$(CONFIG_SENSORS_LTQ_CPUTEMP) += ltq-cputemp.o
+obj-$(CONFIG_SENSORS_MACSMC_HWMON)	+= macsmc-hwmon.o
 obj-$(CONFIG_SENSORS_MAX1111)	+= max1111.o
 obj-$(CONFIG_SENSORS_MAX127)	+= max127.o
 obj-$(CONFIG_SENSORS_MAX16065)	+= max16065.o
drivers/hwmon/macsmc-hwmon.c new file +850 -0

850 lines not on this page · raw message

Signature · 1 line
2.51.0
#11 lore raw

PATCH v3 7/13 mfd: macsmc: Wire up Apple SMC hwmon subdevice

In reply to James Calligeros

Add the SMC hwmon functionality to the mfd device

---
 drivers/mfd/macsmc.c | 1 +
 1 file changed, 1 insertion(+)
drivers/mfd/macsmc.c +1 -0
index 500395bb48da..51dd667d3b5f 100644
@@ -46,6 +46,7 @@
 
 static const struct mfd_cell apple_smc_devs[] = {
 	MFD_CELL_OF("macsmc-gpio", NULL, NULL, 0, 0, "apple,smc-gpio"),
+	MFD_CELL_OF("macsmc-hwmon", NULL, NULL, 0, 0, "apple,smc-hwmon"),
 	MFD_CELL_OF("macsmc-reboot", NULL, NULL, 0, 0, "apple,smc-reboot"),
 	MFD_CELL_OF("macsmc-rtc", NULL, NULL, 0, 0, "apple,smc-rtc"),
 };
Signature · 1 line
2.51.0
#12 lore raw

PATCH v3 8/13 input: macsmc-input: New driver to handle the Apple Mac SMC buttons/lid

In reply to James Calligeros

From: Hector Martin <[email protected]>

This driver implements power button and lid switch support for Apple Mac devices using SMC controllers driven by the macsmc driver.

In addition to basic input support, this also responds to the final shutdown warning (when the power button is held down long enough) by doing an emergency kernel poweroff. This allows the NVMe controller to be cleanly shut down, which prevents data loss for in-cache data.

---
 MAINTAINERS                       |   1 +
 drivers/input/misc/Kconfig        |  11 ++
 drivers/input/misc/Makefile       |   1 +
 drivers/input/misc/macsmc-input.c | 208 +++++++++++++++++++++++++
 4 files changed, 221 insertions(+)
MAINTAINERS +1 -0
index 79b9f40224a9..e8283f127f11 100644
@@ -2451,6 +2451,7 @@ F:	drivers/hwmon/macsmc-hwmon.c
 F:	drivers/pmdomain/apple/
 F:	drivers/i2c/busses/i2c-pasemi-core.c
 F:	drivers/i2c/busses/i2c-pasemi-platform.c
+F:	drivers/input/misc/macsmc-input.c
 F:	drivers/input/touchscreen/apple_z2.c
 F:	drivers/iommu/apple-dart.c
 F:	drivers/iommu/io-pgtable-dart.c
drivers/input/misc/Kconfig +11 -0
index 0e6b49fb54bc..5ab8a4729e0a 100644
@@ -981,4 +981,15 @@ config INPUT_STPMIC1_ONKEY
 	  To compile this driver as a module, choose M here: the
 	  module will be called stpmic1_onkey.
 
+config INPUT_MACSMC_INPUT
+	tristate "Apple Mac SMC lid/buttons"
+	depends on MFD_MACSMC
+	help
+	  Say Y here if you want to use the input events delivered via the
+	  SMC controller on Apple Mac machines using the macsmc driver.
+	  This includes lid open/close and the power button.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called macsmc-input.
+
 endif
drivers/input/misc/Makefile +1 -0
index ae857c24f48e..480a0d08d4ae 100644
@@ -51,6 +51,7 @@ obj-$(CONFIG_INPUT_IQS7222)		+= iqs7222.o
 obj-$(CONFIG_INPUT_KEYSPAN_REMOTE)	+= keyspan_remote.o
 obj-$(CONFIG_INPUT_KXTJ9)		+= kxtj9.o
 obj-$(CONFIG_INPUT_M68K_BEEP)		+= m68kspkr.o
+obj-$(CONFIG_INPUT_MACSMC_INPUT)	+= macsmc-input.o
 obj-$(CONFIG_INPUT_MAX7360_ROTARY)	+= max7360-rotary.o
 obj-$(CONFIG_INPUT_MAX77650_ONKEY)	+= max77650-onkey.o
 obj-$(CONFIG_INPUT_MAX77693_HAPTIC)	+= max77693-haptic.o
drivers/input/misc/macsmc-input.c new file +208 -0

208 lines not on this page · raw message

Signature · 1 line
2.51.0
#14 lore raw

PATCH v3 9/13 mfd: macsmc: Wire up Apple SMC input subdevice

In reply to James Calligeros

Add the new SMC input function to the mfd device

---
 drivers/mfd/macsmc.c | 1 +
 1 file changed, 1 insertion(+)
drivers/mfd/macsmc.c +1 -0
index 51dd667d3b5f..3b69eb6d032a 100644
@@ -45,6 +45,7 @@
 #define SMC_TIMEOUT_MS		500
 
 static const struct mfd_cell apple_smc_devs[] = {
+	MFD_CELL_NAME("macsmc-input"),
 	MFD_CELL_OF("macsmc-gpio", NULL, NULL, 0, 0, "apple,smc-gpio"),
 	MFD_CELL_OF("macsmc-hwmon", NULL, NULL, 0, 0, "apple,smc-hwmon"),
 	MFD_CELL_OF("macsmc-reboot", NULL, NULL, 0, 0, "apple,smc-reboot"),
Signature · 1 line
2.51.0
#15 lore raw

PATCH v3 10/13 arm64: dts: apple: t8103,t60xx,t8112: Add SMC RTC node

In reply to James Calligeros

From: Sven Peter <[email protected]>

The System Manager Controller of all M1/M2 SoCs supports the RTC sub-device.

---
 .../arm64/boot/dts/apple/t600x-die0.dtsi | 6 ++++++
 .../arm64/boot/dts/apple/t602x-die0.dtsi | 6 ++++++
 arch/arm64/boot/dts/apple/t8103.dtsi     | 6 ++++++
 arch/arm64/boot/dts/apple/t8112.dtsi     | 6 ++++++
 4 files changed, 24 insertions(+)
arch/arm64/boot/dts/apple/t600x-die0.dtsi +6 -0
index 3603b276a2ab..f715b19efd16 100644
@@ -44,6 +44,12 @@ smc_reboot: reboot {
 			nvmem-cell-names = "shutdown_flag", "boot_stage",
 				"boot_error_count", "panic_count";
 		};
+
+		rtc {
+			compatible = "apple,smc-rtc";
+			nvmem-cells = <&rtc_offset>;
+			nvmem-cell-names = "rtc_offset";
+		};
 	};
 
 	smc_mbox: mbox@290408000 {
arch/arm64/boot/dts/apple/t602x-die0.dtsi +6 -0
index 2e7d2bf08ddc..8622ddea7b44 100644
@@ -121,6 +121,12 @@ smc_reboot: reboot {
 			nvmem-cell-names = "shutdown_flag", "boot_stage",
 				"boot_error_count", "panic_count";
 		};
+
+		rtc {
+			compatible = "apple,smc-rtc";
+			nvmem-cells = <&rtc_offset>;
+			nvmem-cell-names = "rtc_offset";
+		};
 	};
 
 	pinctrl_smc: pinctrl@2a2820000 {
arch/arm64/boot/dts/apple/t8103.dtsi +6 -0
index 8b7b27887968..59f2678639cf 100644
@@ -916,6 +916,12 @@ smc_reboot: reboot {
 				nvmem-cell-names = "shutdown_flag", "boot_stage",
 					"boot_error_count", "panic_count";
 			};
+
+			rtc {
+				compatible = "apple,smc-rtc";
+				nvmem-cells = <&rtc_offset>;
+				nvmem-cell-names = "rtc_offset";
+			};
 		};
 
 		smc_mbox: mbox@23e408000 {
arch/arm64/boot/dts/apple/t8112.dtsi +6 -0
index 3f79878b25af..6bc3f58b06f7 100644
@@ -919,6 +919,12 @@ smc_reboot: reboot {
 				nvmem-cell-names = "shutdown_flag", "boot_stage",
 					"boot_error_count", "panic_count";
 			};
+
+			rtc {
+				compatible = "apple,smc-rtc";
+				nvmem-cells = <&rtc_offset>;
+				nvmem-cell-names = "rtc_offset";
+			};
 		};
 
 		smc_mbox: mbox@23e408000 {
Signature · 1 line
2.51.0
#16 lore raw

PATCH v3 11/13 arm64: dts: apple: t8103, t8112, t60xx: add hwmon SMC subdevice

In reply to James Calligeros

Apple's System Management Controller integrates numerous sensors that can be exposed via hwmon. Add the subdevice and compatible in preparation for the sensors that need to be described for each device.

---
 .../arm64/boot/dts/apple/t600x-die0.dtsi | 4 ++++
 .../arm64/boot/dts/apple/t602x-die0.dtsi | 4 ++++
 arch/arm64/boot/dts/apple/t8103.dtsi     | 4 ++++
 arch/arm64/boot/dts/apple/t8112.dtsi     | 4 ++++
 4 files changed, 16 insertions(+)
arch/arm64/boot/dts/apple/t600x-die0.dtsi +4 -0
index f715b19efd16..e6647c1a9173 100644
@@ -37,6 +37,10 @@ smc_gpio: gpio {
 			#gpio-cells = <2>;
 		};
 
+		smc_hwmon: hwmon {
+			compatible = "apple,smc-hwmon";
+		};
+
 		smc_reboot: reboot {
 			compatible = "apple,smc-reboot";
 			nvmem-cells = <&shutdown_flag>, <&boot_stage>,
arch/arm64/boot/dts/apple/t602x-die0.dtsi +4 -0
index 8622ddea7b44..680c103c1c0f 100644
@@ -114,6 +114,10 @@ smc_gpio: gpio {
 			#gpio-cells = <2>;
 		};
 
+		smc_hwmon: hwmon {
+			compatible = "apple,smc-hwmon";
+		};
+
 		smc_reboot: reboot {
 			compatible = "apple,smc-reboot";
 			nvmem-cells = <&shutdown_flag>, <&boot_stage>,
arch/arm64/boot/dts/apple/t8103.dtsi +4 -0
index 59f2678639cf..78eb931d6fb7 100644
@@ -909,6 +909,10 @@ smc_gpio: gpio {
 				#gpio-cells = <2>;
 			};
 
+			smc_hwmon: hwmon {
+				compatible = "apple,smc-hwmon";
+			};
+
 			smc_reboot: reboot {
 				compatible = "apple,smc-reboot";
 				nvmem-cells = <&shutdown_flag>, <&boot_stage>,
arch/arm64/boot/dts/apple/t8112.dtsi +4 -0
index 6bc3f58b06f7..5a8fa6daa00a 100644
@@ -912,6 +912,10 @@ smc_gpio: gpio {
 				#gpio-cells = <2>;
 			};
 
+			smc_hwmon: hwmon {
+				compatible = "apple,smc-hwmon";
+			};
+
 			smc_reboot: reboot {
 				compatible = "apple,smc-reboot";
 				nvmem-cells = <&shutdown_flag>, <&boot_stage>,
Signature · 1 line
2.51.0
#17 lore raw

PATCH v3 12/13 arm64: dts: apple: Add common hwmon sensors and fans

In reply to James Calligeros

Each Apple Silicon device exposes a unique set of sensors and fans, however some have been found to be reliably common across devices.

Add these as .dtsi files so that they can be combined with any device-specific sensors without excessive repetition.

---
 .../boot/dts/apple/hwmon-common.dtsi     | 33 +++++++++++++++++++++++++
 .../boot/dts/apple/hwmon-fan-dual.dtsi   | 22 +++++++++++++++++
 arch/arm64/boot/dts/apple/hwmon-fan.dtsi | 17 +++++++++++++
 .../boot/dts/apple/hwmon-laptop.dtsi     | 33 +++++++++++++++++++++++++
 .../boot/dts/apple/hwmon-mac-mini.dtsi   | 15 +++++++++++
 5 files changed, 120 insertions(+)
arch/arm64/boot/dts/apple/hwmon-common.dtsi new file +33 -0
new file mode 100644
index 000000000000..b87021855fdf
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Hardware monitoring sensors expected to be found on all Apple Silicon devices
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+&smc_hwmon {
+	current-ID0R {
+		apple,key-id = "ID0R";
+		label = "AC Input Current";
+	};
+	power-PSTR {
+		apple,key-id = "PSTR";
+		label = "Total System Power";
+	};
+	power-PDTR {
+		apple,key-id = "PDTR";
+		label = "AC Input Power";
+	};
+	power-PMVR {
+		apple,key-id = "PMVR";
+		label = "3.8 V Rail Power";
+	};
+	temperature-TH0x {
+		apple,key-id = "TH0x";
+		label = "NAND Flash Temperature";
+	};
+	voltage-VD0R {
+		apple,key-id = "VD0R";
+		label = "AC Input Voltage";
+	};
+};
arch/arm64/boot/dts/apple/hwmon-fan-dual.dtsi new file +22 -0
new file mode 100644
index 000000000000..3eef0721bcca
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * SMC hwmon fan keys for Apple Silicon desktops/laptops with two fans
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+#include "hwmon-fan.dtsi"
+
+&smc_hwmon {
+	fan-F0Ac {
+		label = "Fan 1";
+	};
+	fan-F1Ac {
+		apple,key-id = "F1Ac";
+		label = "Fan 2";
+		apple,fan-minimum = "F1Mn";
+		apple,fan-maximum = "F1Mx";
+		apple,fan-target = "F1Tg";
+		apple,fan-mode = "F1Md";
+	};
+};
arch/arm64/boot/dts/apple/hwmon-fan.dtsi new file +17 -0
new file mode 100644
index 000000000000..fba9faf38f4b
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * hwmon fan keys for Apple Silicon desktops/laptops with a single fan.
+ *
+ *  Copyright The Asahi Linux Contributors
+ */
+
+&smc_hwmon {
+	fan-F0Ac {
+		apple,key-id = "F0Ac";
+		label = "Fan";
+		apple,fan-minimum = "F0Mn";
+		apple,fan-maximum = "F0Mx";
+		apple,fan-target = "F0Tg";
+		apple,fan-mode = "F0Md";
+	};
+};
arch/arm64/boot/dts/apple/hwmon-laptop.dtsi new file +33 -0
new file mode 100644
index 000000000000..0c4666282a5c
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Hardware monitoring sensors expected on all Apple Silicon laptops
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+&smc_hwmon {
+	power-PHPC {
+		apple,key-id = "PHPC";
+		label = "Heatpipe Power";
+	};
+	temperature-TB0T {
+		apple,key-id = "TB0T";
+		label = "Battery Hotspot Temperature";
+	};
+	temperature-TCHP {
+		apple,key-id = "TCHP";
+		label = "Charge Regulator Temperature";
+	};
+	temperature-TW0P {
+		apple,key-id = "TW0P";
+		label = "WiFi/BT Module Temperature";
+	};
+	voltage-SBAV {
+		apple,key-id = "SBAV";
+		label = "Battery Voltage";
+	};
+	voltage-VD0R {
+		apple,key-id = "VD0R";
+		label = "Charger Input Voltage";
+	};
+};
arch/arm64/boot/dts/apple/hwmon-mac-mini.dtsi new file +15 -0
new file mode 100644
index 000000000000..f32627336ae7
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * hwmon sensors expected on all Mac mini models
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+#include "hwmon-fan.dtsi"
+
+&smc_hwmon {
+	temperature-TW0P {
+		apple,key-id = "TW0P";
+		label = "WiFi/BT Module Temperature";
+	};
+};
Signature · 1 line
2.51.0
#18 lore raw

PATCH v3 13/13 arm64: dts: apple: t8103, t60xx, t8112: Add common hwmon nodes to devices

In reply to James Calligeros

Add the known, common hwmon-related SMC keys to the DTs for the devices they pertain to.

---
 .../arm64/boot/dts/apple/t6001-j375c.dts | 2 ++
 arch/arm64/boot/dts/apple/t6001.dtsi     | 2 ++
 .../arm64/boot/dts/apple/t6002-j375d.dts | 2 ++
 .../boot/dts/apple/t600x-j314-j316.dtsi  | 3 +++
 arch/arm64/boot/dts/apple/t8103-j274.dts | 2 ++
 arch/arm64/boot/dts/apple/t8103-j293.dts | 3 +++
 arch/arm64/boot/dts/apple/t8103-j313.dts | 2 ++
 arch/arm64/boot/dts/apple/t8103-j456.dts | 2 ++
 arch/arm64/boot/dts/apple/t8103-j457.dts | 2 ++
 arch/arm64/boot/dts/apple/t8103.dtsi     | 1 +
 arch/arm64/boot/dts/apple/t8112-j413.dts | 2 ++
 arch/arm64/boot/dts/apple/t8112-j473.dts | 2 ++
 arch/arm64/boot/dts/apple/t8112-j493.dts | 3 +++
 arch/arm64/boot/dts/apple/t8112.dtsi     | 1 +
 14 files changed, 29 insertions(+)
arch/arm64/boot/dts/apple/t6001-j375c.dts +2 -0
index 2e7c23714d4d..08276114c1d8 100644
@@ -24,3 +24,5 @@ &wifi0 {
 &bluetooth0 {
 	brcm,board-type = "apple,okinawa";
 };
+
+#include "hwmon-fan-dual.dtsi"
arch/arm64/boot/dts/apple/t6001.dtsi +2 -0
index ffbe823b71bc..264df90f07d8 100644
@@ -66,3 +66,5 @@ p-core-pmu-affinity {
 &gpu {
 	compatible = "apple,agx-g13c", "apple,agx-g13s";
 };
+
+#include "hwmon-common.dtsi"
arch/arm64/boot/dts/apple/t6002-j375d.dts +2 -0
index 2b7f80119618..d12c0ae418f7 100644
@@ -56,3 +56,5 @@ &bluetooth0 {
 
 /delete-node/ &ps_disp0_cpu0_die1;
 /delete-node/ &ps_disp0_fe_die1;
+
+#include "hwmon-fan-dual.dtsi"
arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi +3 -0
index c0aac59a6fae..127814a9dfa4 100644
@@ -131,3 +131,6 @@ &fpwm0 {
 };
 
 #include "spi1-nvram.dtsi"
+
+#include "hwmon-laptop.dtsi"
+#include "hwmon-fan-dual.dtsi"
arch/arm64/boot/dts/apple/t8103-j274.dts +2 -0
index 1c3e37f86d46..f5b8cc087882 100644
@@ -61,3 +61,5 @@ &pcie0_dart_2 {
 &i2c2 {
 	status = "okay";
 };
+
+#include "hwmon-mac-mini.dtsi"
arch/arm64/boot/dts/apple/t8103-j293.dts +3 -0
index 5b3c42e9f0e6..abb88391635f 100644
@@ -119,3 +119,6 @@ dfr_panel_in: endpoint {
 &displaydfr_dart {
 	status = "okay";
 };
+
+#include "hwmon-laptop.dtsi"
+#include "hwmon-fan.dtsi"
arch/arm64/boot/dts/apple/t8103-j313.dts +2 -0
index 97a4344d8dca..491ead016b21 100644
@@ -41,3 +41,5 @@ &wifi0 {
 &fpwm1 {
 	status = "okay";
 };
+
+#include "hwmon-laptop.dtsi"
arch/arm64/boot/dts/apple/t8103-j456.dts +2 -0
index 58c8e43789b4..c2ec6fbb633c 100644
@@ -75,3 +75,5 @@ &pcie0_dart_1 {
 &pcie0_dart_2 {
 	status = "okay";
 };
+
+#include "hwmon-fan-dual.dtsi"
arch/arm64/boot/dts/apple/t8103-j457.dts +2 -0
index 7089ccf3ce55..aeaab2482d54 100644
@@ -56,3 +56,5 @@ ethernet0: ethernet@0,0 {
 &pcie0_dart_2 {
 	status = "okay";
 };
+
+#include "hwmon-fan.dtsi"
arch/arm64/boot/dts/apple/t8103.dtsi +1 -0
index 78eb931d6fb7..f1820bdc0910 100644
@@ -1145,3 +1145,4 @@ port02: pci@2,0 {
 };
 
 #include "t8103-pmgr.dtsi"
+#include "hwmon-common.dtsi"
arch/arm64/boot/dts/apple/t8112-j413.dts +2 -0
index 6f69658623bf..500dcdf2d4b5 100644
@@ -78,3 +78,5 @@ &i2c4 {
 &fpwm1 {
 	status = "okay";
 };
+
+#include "hwmon-laptop.dtsi"
arch/arm64/boot/dts/apple/t8112-j473.dts +2 -0
index 06fe257f08be..11db6a92493f 100644
@@ -52,3 +52,5 @@ &pcie1_dart {
 &pcie2_dart {
 	status = "okay";
 };
+
+#include "hwmon-mac-mini.dtsi"
arch/arm64/boot/dts/apple/t8112-j493.dts +3 -0
index fb8ad7d4c65a..a0da02c00f15 100644
@@ -133,3 +133,6 @@ touchbar0: touchbar@0 {
 		touchscreen-inverted-y;
 	};
 };
+
+#include "hwmon-laptop.dtsi"
+#include "hwmon-fan.dtsi"
arch/arm64/boot/dts/apple/t8112.dtsi +1 -0
index 5a8fa6daa00a..c4d1e5ffaee9 100644
@@ -1184,3 +1184,4 @@ port03: pci@3,0 {
 };
 
 #include "t8112-pmgr.dtsi"
+#include "hwmon-common.dtsi"
Signature · 1 line
2.51.0
maintainer Reviewed-by on v3 2/13
#3 lore raw

Re: [PATCH v3 02/13] dt-bindings: hwmon: Add Apple System Management Controller hwmon schema

In reply to James Calligeros
Quoted 21 lines · James Calligeros

Apple Silicon devices integrate a vast array of sensors, monitoring current, power, temperature, and voltage across almost every part of the system. The sensors themselves are all connected to the System Management Controller (SMC). The SMC firmware exposes the data reported by these sensors via its standard FourCC-based key-value API. The SMC is also responsible for monitoring and controlling any fans connected to the system, exposing them in the same way.

For reasons known only to Apple, each device exposes its sensors with an almost totally unique set of keys. This is true even for devices which share an SoC. An M1 Mac mini, for example, will report its core temperatures on different keys to an M1 MacBook Pro. Worse still, the SMC does not provide a way to enumerate the available keys at runtime, nor do the keys follow any sort of reasonable or consistent naming rules that could be used to deduce their purpose. We must therefore know which keys are present on any given device, and which function they serve, ahead of time.

Add a schema so that we can describe the available sensors for a given Apple Silicon device in the Devicetree.

Quoted 8 lines
---
 .../bindings/hwmon/apple,smc-hwmon.yaml  | 86 +++++++++++++++++++++++++
 .../bindings/mfd/apple,smc.yaml          | 36 +++++++++++
 MAINTAINERS                              |  1 +
 3 files changed, 123 insertions(+)
maintainer Acked-by on v3 6/13
#8 lore raw

Re: [PATCH v3 06/13] hwmon: Add Apple Silicon SMC hwmon driver

In reply to James Calligeros
Quoted 16 lines · James Calligeros

The System Management Controller on Apple Silicon devices is responsible for integrating and exposing the data reported by the vast array of hardware monitoring sensors present on these devices. It is also responsible for fan control, and allows users to manually set fan speeds if they so desire. Add a hwmon driver to expose current, power, temperature, and voltage monitoring sensors, as well as fan speed monitoring and control via the SMC on Apple Silicon devices.

The SMC firmware has no consistency between devices, even when they share an SoC. The FourCC keys used to access sensors are almost random. An M1 Mac mini will have different FourCCs for its CPU core temperature sensors to an M1 MacBook Pro, for example. For this reason, the valid sensors for a given device are specified in a child of the SMC Devicetree node. The driver uses this information to determine which sensors to make available at runtime.

Quoted 4 lines
#9 lore raw

Re: [PATCH v3 06/13] hwmon: Add Apple Silicon SMC hwmon driver

In reply to James Calligeros
kernel test robot noticed the following build errors:

Hi James,

kernel test robot noticed the following build errors:

[auto build test ERROR on c746c3b5169831d7fb032a1051d8b45592ae8d78]

url:    https://github.com/intel-lab-lkp/linux/commits/James-Calligeros/dt-bindings-rtc-Add-Apple-SMC-RTC/20251010-092141
base:   c746c3b5169831d7fb032a1051d8b45592ae8d78
patch link:    https://lore.kernel.org/r/20251007-macsmc-subdevs-v3-6-d7d3bfd7ae02%40gmail.com
patch subject: [PATCH v3 06/13] hwmon: Add Apple Silicon SMC hwmon driver
config: sparc-allmodconfig (https://download.01.org/0day-ci/archive/20251011/[email protected]/config)
compiler: sparc64-linux-gcc (GCC) 15.1.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20251011/[email protected]/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <[email protected]>
| Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/

All errors (new ones prefixed by >>):

drivers/hwmon/macsmc-hwmon.c: In function 'macsmc_hwmon_write_f32':

>> drivers/hwmon/macsmc-hwmon.c:246:24: error: implicit declaration of function 'FIELD_PREP' [-Wimplicit-function-declaration]

246 | fval = FIELD_PREP(FLT_SIGN_MASK, neg) |
| ^~~~~~~~~~

vim +/FIELD_PREP +246 drivers/hwmon/macsmc-hwmon.c

225
226 static int macsmc_hwmon_write_f32(struct apple_smc *smc, smc_key key, int value)
227 {
228 u64 val;
229 u32 fval = 0;
230 int exp = 0, neg;
231
232 val = abs(value);
233 neg = val != value;
234
235 if (val) {
236 int msb = __fls(val) - exp;
237
238 if (msb > 23) {
239 val >>= msb - FLT_MANT_BIAS;
240 exp -= msb - FLT_MANT_BIAS;
241 } else if (msb < 23) {
242 val <<= FLT_MANT_BIAS - msb;
243 exp += msb;
244 }
245

 > 246			fval = FIELD_PREP(FLT_SIGN_MASK, neg) |

247 FIELD_PREP(FLT_EXP_MASK, exp + FLT_EXP_BIAS) |
248 FIELD_PREP(FLT_MANT_MASK, val);
249 }
250
251 return apple_smc_write_u32(smc, key, fval);
252 }
253

Signature · 2 lines
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
maintainer
#10 lore raw

Re: [PATCH v3 06/13] hwmon: Add Apple Silicon SMC hwmon driver

In reply to James Calligeros
Quoted 27 lines · James Calligeros

The System Management Controller on Apple Silicon devices is responsible for integrating and exposing the data reported by the vast array of hardware monitoring sensors present on these devices. It is also responsible for fan control, and allows users to manually set fan speeds if they so desire. Add a hwmon driver to expose current, power, temperature, and voltage monitoring sensors, as well as fan speed monitoring and control via the SMC on Apple Silicon devices.

The SMC firmware has no consistency between devices, even when they share an SoC. The FourCC keys used to access sensors are almost random. An M1 Mac mini will have different FourCCs for its CPU core temperature sensors to an M1 MacBook Pro, for example. For this reason, the valid sensors for a given device are specified in a child of the SMC Devicetree node. The driver uses this information to determine which sensors to make available at runtime.

---
 Documentation/hwmon/macsmc-hwmon.rst |  71 +++
 MAINTAINERS                          |   2 +
 drivers/hwmon/Kconfig                |  12 +
 drivers/hwmon/Makefile               |   1 +
 drivers/hwmon/macsmc-hwmon.c         | 850 +++++++++++++++++++++++++
 5 files changed, 936 insertions(+)

...

Quoted 28 lines
drivers/hwmon/Makefile +1 -0
@@ -148,6 +148,7 @@ obj-$(CONFIG_SENSORS_LTC4260)	+= ltc4260.o
 obj-$(CONFIG_SENSORS_LTC4261)	+= ltc4261.o
 obj-$(CONFIG_SENSORS_LTC4282)	+= ltc4282.o
 obj-$(CONFIG_SENSORS_LTQ_CPUTEMP) += ltq-cputemp.o
+obj-$(CONFIG_SENSORS_MACSMC_HWMON)	+= macsmc-hwmon.o
 obj-$(CONFIG_SENSORS_MAX1111)	+= max1111.o
 obj-$(CONFIG_SENSORS_MAX127)	+= max127.o
 obj-$(CONFIG_SENSORS_MAX16065)	+= max16065.o
drivers/hwmon/macsmc-hwmon.c new file +12 -0
new file mode 100644
index 000000000000..342fe3a5ff62
@@ -0,0 +1,850 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Apple SMC hwmon driver for Apple Silicon platforms
+ *
+ * The System Management Controller on Apple Silicon devices is responsible for
+ * measuring data from sensors across the SoC and machine. These include power,
+ * temperature, voltage and current sensors. Some "sensors" actually expose
+ * derived values. An example of this is the key PHPC, which is an estimate
+ * of the heat energy being dissipated by the SoC.
+ *
+ * While each SoC only has one SMC variant, each platform exposes a different
+ * set of sensors. For example, M1 MacBooks expose battery telemetry sensors

drivers/hwmon/macsmc-hwmon.c line 22

Quoted 10 lines
drivers/hwmon/macsmc-hwmon.c new file +10 -0
+ * which are not present on the M1 Mac mini. For this reason, the available
+ * sensors for a given platform are described in the device tree in a child
+ * node of the SMC device. We must walk this list of available sensors and
+ * populate the required hwmon data structures at runtime.
+ *
+ * Originally based on a concept by Jean-Francois Bortolotti <[email protected]>
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+

missing linux/bitfield.h include as noted by kernel robot

Quoted 5 lines
drivers/hwmon/macsmc-hwmon.c new file +5 -0
+#include <linux/hwmon.h>
+#include <linux/mfd/macsmc.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>

...

Quoted 43 lines
drivers/hwmon/macsmc-hwmon.c new file +43 -0
+static int macsmc_hwmon_probe(struct platform_device *pdev)
+{
+	struct apple_smc *smc = dev_get_drvdata(pdev->dev.parent);
+	struct macsmc_hwmon *hwmon;
+	int ret;
+
+	/*
+	 * The MFD driver will try to probe us unconditionally. Some devices
+	 * with the SMC do not have hwmon capabilities. Only probe if we have
+	 * a hwmon node.
+	 */
+	if (!pdev->dev.of_node)
+		return -ENODEV;
+
+	hwmon = devm_kzalloc(&pdev->dev, sizeof(*hwmon),
+			     GFP_KERNEL);
+	if (!hwmon)
+		return -ENOMEM;
+
+	hwmon->dev = &pdev->dev;
+	hwmon->smc = smc;
+
+	ret = macsmc_hwmon_populate_sensors(hwmon, hwmon->dev->of_node);
+	if (ret) {
+		dev_err(hwmon->dev, "Could not parse sensors\n");
+		return ret;
+	}
+
+	if (!hwmon->curr.count && !hwmon->fan.count &&
+	    !hwmon->power.count && !hwmon->temp.count &&
+	    !hwmon->volt.count) {
+		dev_err(hwmon->dev,
+			"No valid sensors found of any supported type\n");
+		return -ENODEV;
+	}
+
+	ret = macsmc_hwmon_create_infos(hwmon);
+	if (ret)
+		return ret;
+
+	hwmon->chip_info.ops = &macsmc_hwmon_ops;
+	hwmon->chip_info.info =
+		(const struct hwmon_channel_info *const *)&hwmon->channel_infos;

drivers/hwmon/macsmc-hwmon.c line 824

Quoted 10 lines
drivers/hwmon/macsmc-hwmon.c new file +10 -0
+
+	hwmon->hwmon_dev = devm_hwmon_device_register_with_info(&pdev->dev,
+								"macsmc_hwmon", hwmon,
+								&hwmon->chip_info, NULL);
+	if (IS_ERR(hwmon->hwmon_dev))
+		return dev_err_probe(hwmon->dev, PTR_ERR(hwmon->hwmon_dev),
+				     "Probing SMC hwmon device failed\n");
+
+	dev_info(hwmon->dev, "Registered SMC hwmon device. Sensors:");
+	dev_info(hwmon->dev,

printing non-errors during probe is strongly discouraged. I also do not see much value in this message outside of development so please change to dev_dbg().

Janne

maintainer
#13 lore raw

Re: [PATCH v3 08/13] input: macsmc-input: New driver to handle the Apple Mac SMC buttons/lid

In reply to James Calligeros
Quoted 39 lines · James Calligeros

From: Hector Martin <[email protected]>

This driver implements power button and lid switch support for Apple Mac devices using SMC controllers driven by the macsmc driver.

In addition to basic input support, this also responds to the final shutdown warning (when the power button is held down long enough) by doing an emergency kernel poweroff. This allows the NVMe controller to be cleanly shut down, which prevents data loss for in-cache data.

---
 MAINTAINERS                       |   1 +
 drivers/input/misc/Kconfig        |  11 ++
 drivers/input/misc/Makefile       |   1 +
 drivers/input/misc/macsmc-input.c | 208 +++++++++++++++++++++++++
 4 files changed, 221 insertions(+)
MAINTAINERS +1 -0
index 79b9f40224a9..e8283f127f11 100644
@@ -2451,6 +2451,7 @@ F:	drivers/hwmon/macsmc-hwmon.c
 F:	drivers/pmdomain/apple/
 F:	drivers/i2c/busses/i2c-pasemi-core.c
 F:	drivers/i2c/busses/i2c-pasemi-platform.c
+F:	drivers/input/misc/macsmc-input.c
 F:	drivers/input/touchscreen/apple_z2.c
 F:	drivers/iommu/apple-dart.c
 F:	drivers/iommu/io-pgtable-dart.c
drivers/input/misc/Kconfig +0 -0
index 0e6b49fb54bc..5ab8a4729e0a 100644

drivers/input/misc/Kconfig config INPUT_STPMIC1_ONKEY · line 984

Quoted 4 lines
drivers/input/misc/Kconfig +1 -0
@@ -981,4 +981,15 @@ config INPUT_STPMIC1_ONKEY
 	  To compile this driver as a module, choose M here: the
 	  module will be called stpmic1_onkey.
 
+config INPUT_MACSMC_INPUT

INPUT_MACSMC_INPUT looks redundant, is there a reason for not just using INPUT_MACSMC?

Quoted 29 lines
drivers/input/misc/Kconfig +10 -0
+	tristate "Apple Mac SMC lid/buttons"
+	depends on MFD_MACSMC
+	help
+	  Say Y here if you want to use the input events delivered via the
+	  SMC controller on Apple Mac machines using the macsmc driver.
+	  This includes lid open/close and the power button.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called macsmc-input.
+
 endif
drivers/input/misc/Makefile +1 -0
index ae857c24f48e..480a0d08d4ae 100644
@@ -51,6 +51,7 @@ obj-$(CONFIG_INPUT_IQS7222)		+= iqs7222.o
 obj-$(CONFIG_INPUT_KEYSPAN_REMOTE)	+= keyspan_remote.o
 obj-$(CONFIG_INPUT_KXTJ9)		+= kxtj9.o
 obj-$(CONFIG_INPUT_M68K_BEEP)		+= m68kspkr.o
+obj-$(CONFIG_INPUT_MACSMC_INPUT)	+= macsmc-input.o
 obj-$(CONFIG_INPUT_MAX7360_ROTARY)	+= max7360-rotary.o
 obj-$(CONFIG_INPUT_MAX77650_ONKEY)	+= max77650-onkey.o
 obj-$(CONFIG_INPUT_MAX77693_HAPTIC)	+= max77693-haptic.o
drivers/input/misc/macsmc-input.c new file +0 -0
new file mode 100644
index 000000000000..ebbc7dfc31f5

drivers/input/misc/macsmc-input.c line 6

Quoted 6 lines
drivers/input/misc/macsmc-input.c new file +6 -0
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Apple SMC input event driver
+ * Copyright The Asahi Linux Contributors
+ *
+ * This driver exposes HID events from the SMC as an input device.

s/HID //

Quoted 192 lines
drivers/input/misc/macsmc-input.c new file +192 -0
+ * This includes the lid open/close and power button notifications.
+ */
+
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/macsmc.h>
+#include <linux/module.h>
+#include <linux/reboot.h>
+
+/**
+ * struct macsmc_input
+ * @dev: Underlying struct device for the input sub-device
+ * @smc: Pointer to apple_smc struct of the mfd parent
+ * @input: Allocated input_dev; devres managed
+ * @nb: Notifier block used for incoming events from SMC (e.g. button pressed down)
+ * @wakeup_mode: Set to true when system is suspended and power button events should wake it
+ */
+struct macsmc_input {
+	struct device *dev;
+	struct apple_smc *smc;
+	struct input_dev *input;
+	struct notifier_block nb;
+	bool wakeup_mode;
+};
+
+#define SMC_EV_BTN 0x7201
+#define SMC_EV_LID 0x7203
+
+#define BTN_POWER		0x01 /* power button on e.g. Mac Mini chasis pressed */
+#define BTN_TOUCHID		0x06 /* combined TouchID / power button on MacBooks pressed */
+#define BTN_POWER_HELD_SHORT	0xfe /* power button briefly held down */
+#define BTN_POWER_HELD_LONG	0x00 /* power button held down; sent just before forced poweroff */
+
+static void macsmc_input_event_button(struct macsmc_input *smcin, unsigned long event)
+{
+	u8 button = (event >> 8) & 0xff;
+	u8 state = !!(event & 0xff);
+
+	switch (button) {
+	case BTN_POWER:
+	case BTN_TOUCHID:
+		if (smcin->wakeup_mode) {
+			if (state)
+				pm_wakeup_event(smcin->dev, 0);
+		} else {
+			input_report_key(smcin->input, KEY_POWER, state);
+			input_sync(smcin->input);
+		}
+		break;
+	case BTN_POWER_HELD_SHORT: /* power button held down; ignore */
+		break;
+	case BTN_POWER_HELD_LONG:
+		/*
+		 * If we get here the power button has been held down for a while and
+		 * we have about 4 seconds before forced power-off is triggered by SMC.
+		 * Try to do an emergency shutdown to make sure the NVMe cache is
+		 * flushed. macOS actually does this by panicing (!)...
+		 */
+		if (state) {
+			dev_crit(smcin->dev, "Triggering forced shutdown!\n");
+			if (kernel_can_power_off())
+				kernel_power_off();
+			else /* Missing macsmc-reboot driver? */
+				kernel_restart("SMC power button triggered restart");
+		}
+		break;
+	default:
+		dev_warn(smcin->dev, "Unknown SMC button event: %04lx\n", event & 0xffff);
+	}
+}
+
+static void macsmc_input_event_lid(struct macsmc_input *smcin, unsigned long event)
+{
+	u8 lid_state = !!((event >> 8) & 0xff);
+
+	if (smcin->wakeup_mode && !lid_state)
+		pm_wakeup_event(smcin->dev, 0);
+
+	input_report_switch(smcin->input, SW_LID, lid_state);
+	input_sync(smcin->input);
+}
+
+static int macsmc_input_event(struct notifier_block *nb, unsigned long event, void *data)
+{
+	struct macsmc_input *smcin = container_of(nb, struct macsmc_input, nb);
+	u16 type = event >> 16;
+
+	switch (type) {
+	case SMC_EV_BTN:
+		macsmc_input_event_button(smcin, event);
+		return NOTIFY_OK;
+	case SMC_EV_LID:
+		macsmc_input_event_lid(smcin, event);
+		return NOTIFY_OK;
+	default:
+		/* SMC event meant for another driver */
+		return NOTIFY_DONE;
+	}
+}
+
+static int macsmc_input_probe(struct platform_device *pdev)
+{
+	struct apple_smc *smc = dev_get_drvdata(pdev->dev.parent);
+	struct macsmc_input *smcin;
+	bool have_lid, have_power;
+	int error;
+
+	/* Bail early if this SMC neither supports power button nor lid events */
+	have_lid = apple_smc_key_exists(smc, SMC_KEY(MSLD));
+	have_power = apple_smc_key_exists(smc, SMC_KEY(bHLD));
+	if (!have_lid && !have_power)
+		return -ENODEV;
+
+	smcin = devm_kzalloc(&pdev->dev, sizeof(*smcin), GFP_KERNEL);
+	if (!smcin)
+		return -ENOMEM;
+
+	smcin->dev = &pdev->dev;
+	smcin->smc = smc;
+	platform_set_drvdata(pdev, smcin);
+
+	smcin->input = devm_input_allocate_device(&pdev->dev);
+	if (!smcin->input)
+		return -ENOMEM;
+
+	smcin->input->phys = "macsmc-input (0)";
+	smcin->input->name = "Apple SMC power/lid events";
+
+	if (have_lid)
+		input_set_capability(smcin->input, EV_SW, SW_LID);
+	if (have_power)
+		input_set_capability(smcin->input, EV_KEY, KEY_POWER);
+
+	if (have_lid) {
+		u8 val;
+
+		error = apple_smc_read_u8(smc, SMC_KEY(MSLD), &val);
+		if (error < 0)
+			dev_warn(&pdev->dev, "Failed to read initial lid state\n");
+		else
+			input_report_switch(smcin->input, SW_LID, val);
+	}
+
+	if (have_power) {
+		u32 val;
+
+		error = apple_smc_read_u32(smc, SMC_KEY(bHLD), &val);
+		if (error < 0)
+			dev_warn(&pdev->dev, "Failed to read initial power button state\n");
+		else
+			input_report_key(smcin->input, KEY_POWER, val & 1);
+	}
+
+	error = input_register_device(smcin->input);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to register input device: %d\n", error);
+		return error;
+	}
+
+	input_sync(smcin->input);
+
+	smcin->nb.notifier_call = macsmc_input_event;
+	blocking_notifier_chain_register(&smc->event_handlers, &smcin->nb);
+
+	device_init_wakeup(&pdev->dev, 1);
+
+	return 0;
+}
+
+static int macsmc_input_pm_prepare(struct device *dev)
+{
+	struct macsmc_input *smcin = dev_get_drvdata(dev);
+
+	smcin->wakeup_mode = true;
+	return 0;
+}
+
+static void macsmc_input_pm_complete(struct device *dev)
+{
+	struct macsmc_input *smcin = dev_get_drvdata(dev);
+
+	smcin->wakeup_mode = false;
+}
+
+static const struct dev_pm_ops macsmc_input_pm_ops = {
+	.prepare = macsmc_input_pm_prepare,
+	.complete = macsmc_input_pm_complete,
+};
+
+static struct platform_driver macsmc_input_driver = {
+	.driver = {

drivers/input/misc/macsmc-input.c line 208

Quoted 10 lines
drivers/input/misc/macsmc-input.c new file +10 -0
+		.name = "macsmc-input",
+		.pm = &macsmc_input_pm_ops,
+	},
+	.probe = macsmc_input_probe,
+};
+module_platform_driver(macsmc_input_driver);
+
+MODULE_AUTHOR("Hector Martin <[email protected]>");
+MODULE_LICENSE("Dual MIT/GPL");
+MODULE_DESCRIPTION("Apple SMC input driver");

mssing 'MODULE_ALIAS("platform:macsmc-input");'. This is required when using MFD_CELL_NAME(). My ask for it to be removed was based on my mistaken idea to add a pointless node to the DT and use MFD_CELL_OF().

Janne

maintainer
#19 lore raw
In reply to James Calligeros
Quoted 10 lines · James Calligeros

Hi all,

This series adds support for the remaining SMC subdevices. These are the RTC, hwmon, and HID devices. They are being submitted together as the RTC and hwmon drivers both require changes to the SMC DT schema.

The RTC driver is responsible for getting and setting the system clock, and requires an NVMEM cell. This series replaces Sven's original RTC driver submission [1].

Quoted 11 lines

The hwmon function is an interesting one. While each Apple Silicon device exposes pretty similar sets of sensors, these all seem to be paired to different SMC keys in the firmware interface. This is true even when the sensors are on the SoC. For example, an M1 MacBook Pro will use different keys to access the LITTLE core temperature sensors to an M1 Mac mini. This necessitates describing which keys correspond to which sensors for each device individually, and populating the hwmon structs at runtime. We do this with a node in the device tree. This series includes only the keys for sensors which we know to be common to all devices. The SMC is also responsible for monitoring and controlling fan speeds on systems with fans, which we expose via the hwmon driver.

The split of the hwmon dts changes looks weird to me. It's not a lot of changes so squashing everything together into a single commit might be ok. If you want to split the commits splitting them by SoC (t8103, t8112, t600x, ...) and adding common sensor defines as needed might work better.

Quoted 3 lines

The SMC also handles the hardware power button and lid switch. Power button presses and lid opening/closing are emitted as HID events, so we add an input subdevice to handle them.

The cover letter doesn't mention a merge strategy for this series. I don't think there are any dependencies between different parts. That means the dt-bindings and driver additions can be merged through their subsystem trees. The single line patches wiring the devices up to the macsmc mfd driver should be merged together through mfd tree as they (trivially) conflict. The dts changes will be merged through the apple soc tree.

Janne