spi: dw-mmio: add error handling for reset_control_deassert()
PATCH 1/1 spi: dw-mmio: add error handling for reset_control_deassert()
Currently reset_control_deassert() is called without checking its return value. This can lead to silent failures when reset deassertion fails.
Add proper error handling to:
1. Check the return value of reset_control_deassert()
2. Return the error to the caller
3. Provide meaningful error message using dev_err_probe()
This ensures that reset-related failures are properly reported during probe and helps with debugging reset issues.
---
This patch addresses an issue in the DesignWare SPI MMIO driver where the return value of reset_control_deassert() was not being checked, potentially leading to silent failures.
The problem occurs when reset deassertion fails - the driver would continue probing without the device being properly reset, which could result in unpredictable behavior or hardware malfunctions.
Patch adds proper error checking and propagation for the reset_control_deassert() call, ensuring that probe fails gracefully when reset operations cannot be completed successfully.
This change improves the robustness of the driver and provides better debugging information when reset-related issues occur.
drivers/spi/spi-dw-mmio.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/spi/spi-dw-mmio.c +3 -1
@@ -358,7 +358,9 @@ static int dw_spi_mmio_probe(struct platform_device *pdev)if (IS_ERR (dwsmmio->rstc))return PTR_ERR (dwsmmio->rstc); -reset_control_deassert (dwsmmio->rstc); + ret =reset_control_deassert (dwsmmio->rstc); +if (ret) +return dev_err_probe (&pdev->dev, ret,"Failed to deassert resets\n" ); dws->bus_num = pdev->id;
Signature · 1 line
2.43.0
Mark Brown
maintainerQuoted 10 lines · Artem Shimko
Currently
reset_control_deassert()is called without checking its return value. This can lead to silent failures when reset deassertion fails.Add proper error handling to:
1. Check the return value ofreset_control_deassert()
2. Return the error to the caller
3. Provide meaningful error message usingdev_err_probe()[...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next
Thanks!
[1/1] spi: dw-mmio: add error handling for reset_control_deassert()
commit: 18a5f1af596e6ba22cd40ada449063041f3ce6d4
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark