6.6.111-rc1 review

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Will Deacon <[email protected]>

Stable commit 28b82be094e2 ("KVM: arm64: Fix kernel BUG() due to bad backport of FPSIMD/SVE/SME fix") fixed a kernel BUG() caused by a bad backport of upstream commit fbc7e61195e2 ("KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state") by ensuring that softirqs are disabled/enabled across the fpsimd register save operation.

Unfortunately, although this fixes the original issue, it can now lead to deadlock when re-enabling softirqs causes pending softirqs to be handled with locks already held:

 | BUG: spinlock recursion on CPU#7, CPU 3/KVM/57616
 |  lock: 0xffff3045ef850240, .magic: dead4ead, .owner: CPU 3/KVM/57616, .owner_cpu: 7
 | CPU: 7 PID: 57616 Comm: CPU 3/KVM Tainted: G           O       6.1.152 #1
 | Hardware name: SoftIron SoftIron Platform Mainboard/SoftIron Platform Mainboard, BIOS 1.31 May 11 2023
 | Call trace:
 |  dump_backtrace+0xe4/0x110
 |  show_stack+0x20/0x30
 |  dump_stack_lvl+0x6c/0x88
 |  dump_stack+0x18/0x34
 |  spin_dump+0x98/0xac
 |  do_raw_spin_lock+0x70/0x128
 |  _raw_spin_lock+0x18/0x28
 |  raw_spin_rq_lock_nested+0x18/0x28
 |  update_blocked_averages+0x70/0x550
 |  run_rebalance_domains+0x50/0x70
 |  handle_softirqs+0x198/0x328
 |  __do_softirq+0x1c/0x28
 |  ____do_softirq+0x18/0x28
 |  call_on_irq_stack+0x30/0x48
 |  do_softirq_own_stack+0x24/0x30
 |  do_softirq+0x74/0x90
 |  __local_bh_enable_ip+0x64/0x80
 |  fpsimd_save_and_flush_cpu_state+0x5c/0x68
 |  kvm_arch_vcpu_put_fp+0x4c/0x88
 |  kvm_arch_vcpu_put+0x28/0x88
 |  kvm_sched_out+0x38/0x58
 |  __schedule+0x55c/0x6c8
 |  schedule+0x60/0xa8

Take a tiny step towards the upstream fix in 9b19700e623f ("arm64:
fpsimd: Drop unneeded 'busy' flag") by additionally disabling hardirqs while saving the fpsimd registers.

---
 arch/arm64/kernel/fpsimd.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

index d0d836448a76..83827384982e 100644
@@ -1873,13 +1873,17 @@ static void fpsimd_flush_cpu_state(void)
  */
 void fpsimd_save_and_flush_cpu_state(void)
 {
+	unsigned long flags;
+
 	if (!system_supports_fpsimd())
 		return;
 	WARN_ON(preemptible());
-	get_cpu_fpsimd_context();
+	local_irq_save(flags);
+	__get_cpu_fpsimd_context();
 	fpsimd_save();
 	fpsimd_flush_cpu_state();
-	put_cpu_fpsimd_context();
+	__put_cpu_fpsimd_context();
+	local_irq_restore(flags);
 }
 
 #ifdef CONFIG_KERNEL_MODE_NEON

2.51.0.618.g983fd99d29-goog

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: hupu <[email protected]>

[ Upstream commit a5edf3550f4260504b7e0ab3d40d13ffe924b773 ]

When cross-compiling the perf tool for ARM64, perf help may crash with the following assertion failure:

help.c:122: exclude_cmds: Assertion `cmds->names[ci] == NULL' failed.

This happens when the perf binary is not named exactly "perf" or when multiple "perf-*" binaries exist in the same directory. In such cases, the excludes command list can be empty, which leads to the final assertion in exclude_cmds() being triggered.

Add a simple guard at the beginning of exclude_cmds() to return early if excludes->cnt is zero, preventing the crash.

---
 tools/lib/subcmd/help.c | 3 +++
 1 file changed, 3 insertions(+)

index 9ef569492560e..ddaeb4eb3e249 100644
@@ -75,6 +75,9 @@ void exclude_cmds(struct cmdnames *cmds, struct cmdnames *excludes)
 	size_t ci, cj, ei;
 	int cmp;
 
+	if (!excludes->cnt)
+		return;
+
 	ci = cj = ei = 0;
 	while (ci < cmds->cnt && ei < excludes->cnt) {
 		cmp = strcmp(cmds->names[ci]->name, excludes->names[ei]->name);

2.51.0

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jack Yu <[email protected]>

[ Upstream commit 1dd28fd86c3fa4e395031dd6f2ba920242107010 ]

Adjust register settings for SAR adc button detection mode to fix noise issue in headset.

---
 sound/soc/codecs/rt5682s.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

index 92c647d439ec7..89de427c19e79 100644
@@ -653,14 +653,15 @@ static void rt5682s_sar_power_mode(struct snd_soc_component *component, int mode
 	switch (mode) {
 	case SAR_PWR_SAVING:
 		snd_soc_component_update_bits(component, RT5682S_CBJ_CTRL_3,
-			RT5682S_CBJ_IN_BUF_MASK, RT5682S_CBJ_IN_BUF_DIS);
+			RT5682S_CBJ_IN_BUF_MASK, RT5682S_CBJ_IN_BUF_EN);
 		snd_soc_component_update_bits(component, RT5682S_CBJ_CTRL_1,
-			RT5682S_MB1_PATH_MASK | RT5682S_MB2_PATH_MASK,
-			RT5682S_CTRL_MB1_REG | RT5682S_CTRL_MB2_REG);
+			RT5682S_MB1_PATH_MASK | RT5682S_MB2_PATH_MASK |
+			RT5682S_VREF_POW_MASK, RT5682S_CTRL_MB1_FSM |
+			RT5682S_CTRL_MB2_FSM | RT5682S_VREF_POW_FSM);
 		snd_soc_component_update_bits(component, RT5682S_SAR_IL_CMD_1,
 			RT5682S_SAR_BUTDET_MASK | RT5682S_SAR_BUTDET_POW_MASK |
 			RT5682S_SAR_SEL_MB1_2_CTL_MASK, RT5682S_SAR_BUTDET_DIS |
-			RT5682S_SAR_BUTDET_POW_SAV | RT5682S_SAR_SEL_MB1_2_MANU);
+			RT5682S_SAR_BUTDET_POW_NORM | RT5682S_SAR_SEL_MB1_2_MANU);
 		usleep_range(5000, 5500);
 		snd_soc_component_update_bits(component, RT5682S_SAR_IL_CMD_1,
 			RT5682S_SAR_BUTDET_MASK, RT5682S_SAR_BUTDET_EN);

@@ -688,7 +689,7 @@ static void rt5682s_sar_power_mode(struct snd_soc_component *component, int mode
 		snd_soc_component_update_bits(component, RT5682S_SAR_IL_CMD_1,
 			RT5682S_SAR_BUTDET_MASK | RT5682S_SAR_BUTDET_POW_MASK |
 			RT5682S_SAR_SEL_MB1_2_CTL_MASK, RT5682S_SAR_BUTDET_DIS |
-			RT5682S_SAR_BUTDET_POW_SAV | RT5682S_SAR_SEL_MB1_2_MANU);
+			RT5682S_SAR_BUTDET_POW_NORM | RT5682S_SAR_SEL_MB1_2_MANU);
 		break;
 	default:
 		dev_err(component->dev, "Invalid SAR Power mode: %d\n", mode);

@@ -725,7 +726,7 @@ static void rt5682s_disable_push_button_irq(struct snd_soc_component *component)
 	snd_soc_component_update_bits(component, RT5682S_SAR_IL_CMD_1,
 		RT5682S_SAR_BUTDET_MASK | RT5682S_SAR_BUTDET_POW_MASK |
 		RT5682S_SAR_SEL_MB1_2_CTL_MASK, RT5682S_SAR_BUTDET_DIS |
-		RT5682S_SAR_BUTDET_POW_SAV | RT5682S_SAR_SEL_MB1_2_MANU);
+		RT5682S_SAR_BUTDET_POW_NORM | RT5682S_SAR_SEL_MB1_2_MANU);
 }
 
 /**

@@ -786,7 +787,7 @@ static int rt5682s_headset_detect(struct snd_soc_component *component, int jack_
 			jack_type = SND_JACK_HEADSET;
 			snd_soc_component_write(component, RT5682S_SAR_IL_CMD_3, 0x024c);
 			snd_soc_component_update_bits(component, RT5682S_CBJ_CTRL_1,
-				RT5682S_FAST_OFF_MASK, RT5682S_FAST_OFF_EN);
+				RT5682S_FAST_OFF_MASK, RT5682S_FAST_OFF_DIS);
 			snd_soc_component_update_bits(component, RT5682S_SAR_IL_CMD_1,
 				RT5682S_SAR_SEL_MB1_2_MASK, val << RT5682S_SAR_SEL_MB1_2_SFT);
 			rt5682s_enable_push_button_irq(component);

@@ -966,7 +967,7 @@ static int rt5682s_set_jack_detect(struct snd_soc_component *component,
 			RT5682S_EMB_JD_MASK | RT5682S_DET_TYPE |
 			RT5682S_POL_FAST_OFF_MASK | RT5682S_MIC_CAP_MASK,
 			RT5682S_EMB_JD_EN | RT5682S_DET_TYPE |
-			RT5682S_POL_FAST_OFF_HIGH | RT5682S_MIC_CAP_HS);
+			RT5682S_POL_FAST_OFF_LOW | RT5682S_MIC_CAP_HS);
 		regmap_update_bits(rt5682s->regmap, RT5682S_SAR_IL_CMD_1,
 			RT5682S_SAR_POW_MASK, RT5682S_SAR_POW_EN);
 		regmap_update_bits(rt5682s->regmap, RT5682S_GPIO_CTRL_1,

2.51.0

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: David Sterba <[email protected]>

[ Upstream commit ed4e6b5d644c4dd2bc2872ffec036b7da0ec2e27 ]

Syzbot hits a problem with enabled ref-verify, ignorebadroots and a fuzzed/damaged extent tree. There's no fallback option like in other places that can deal with it so disable the whole ref-verify as it is just a debugging feature.

---
 fs/btrfs/ref-verify.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

index 28ac7995716e0..b8122582d7555 100644
@@ -990,11 +990,18 @@ int btrfs_build_ref_tree(struct btrfs_fs_info *fs_info)
 	if (!btrfs_test_opt(fs_info, REF_VERIFY))
 		return 0;
 
+	extent_root = btrfs_extent_root(fs_info, 0);
+	/* If the extent tree is damaged we cannot ignore it (IGNOREBADROOTS). */
+	if (IS_ERR(extent_root)) {
+		btrfs_warn(fs_info, "ref-verify: extent tree not available, disabling");
+		btrfs_clear_opt(fs_info->mount_opt, REF_VERIFY);
+		return 0;
+	}
+
 	path = btrfs_alloc_path();
 	if (!path)
 		return -ENOMEM;
 
-	extent_root = btrfs_extent_root(fs_info, 0);
 	eb = btrfs_read_lock_root_node(extent_root);
 	level = btrfs_header_level(eb);
 	path->nodes[level] = eb;

2.51.0

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Chen Yufeng <[email protected]>

[ Upstream commit 6b696808472197b77b888f50bc789a3bae077743 ]

This issue is similar to the vulnerability in the mcp251x driver, which was fixed in commit 03c427147b2d ("can: mcp251x: fix resume from sleep before interface was brought up").

In the hi311x driver, when the device resumes from sleep, the driver schedules priv->restart_work. However, if the network interface was not previously enabled, the priv->wq (workqueue) is not allocated and initialized, leading to a null pointer dereference.

To fix this, we move the allocation and initialization of the workqueue from the hi3110_open function to the hi3110_can_probe function. This ensures that the workqueue is properly initialized before it is used during device resume. And added logic to destroy the workqueue in the error handling paths of hi3110_can_probe and in the hi3110_can_remove function to prevent resource leaks.

---
 drivers/net/can/spi/hi311x.c | 33 +++++++++++++++++----------------
 1 file changed, 17 insertions(+), 16 deletions(-)

index 57ea7dfe8a596..1acd4fc7adc8b 100644
@@ -545,8 +545,6 @@ static int hi3110_stop(struct net_device *net)
 
 	priv->force_quit = 1;
 	free_irq(spi->irq, priv);
-	destroy_workqueue(priv->wq);
-	priv->wq = NULL;
 
 	mutex_lock(&priv->hi3110_lock);
 

@@ -771,34 +769,23 @@ static int hi3110_open(struct net_device *net)
 		goto out_close;
 	}
 
-	priv->wq = alloc_workqueue("hi3110_wq", WQ_FREEZABLE | WQ_MEM_RECLAIM,
-				   0);
-	if (!priv->wq) {
-		ret = -ENOMEM;
-		goto out_free_irq;
-	}
-	INIT_WORK(&priv->tx_work, hi3110_tx_work_handler);
-	INIT_WORK(&priv->restart_work, hi3110_restart_work_handler);
-
 	ret = hi3110_hw_reset(spi);
 	if (ret)
-		goto out_free_wq;
+		goto out_free_irq;
 
 	ret = hi3110_setup(net);
 	if (ret)
-		goto out_free_wq;
+		goto out_free_irq;
 
 	ret = hi3110_set_normal_mode(spi);
 	if (ret)
-		goto out_free_wq;
+		goto out_free_irq;
 
 	netif_wake_queue(net);
 	mutex_unlock(&priv->hi3110_lock);
 
 	return 0;
 
- out_free_wq:
-	destroy_workqueue(priv->wq);
  out_free_irq:
 	free_irq(spi->irq, priv);
 	hi3110_hw_sleep(spi);

@@ -915,6 +902,15 @@ static int hi3110_can_probe(struct spi_device *spi)
 	if (ret)
 		goto out_clk;
 
+	priv->wq = alloc_workqueue("hi3110_wq", WQ_FREEZABLE | WQ_MEM_RECLAIM,
+				   0);
+	if (!priv->wq) {
+		ret = -ENOMEM;
+		goto out_clk;
+	}
+	INIT_WORK(&priv->tx_work, hi3110_tx_work_handler);
+	INIT_WORK(&priv->restart_work, hi3110_restart_work_handler);
+
 	priv->spi = spi;
 	mutex_init(&priv->hi3110_lock);
 

@@ -950,6 +946,8 @@ static int hi3110_can_probe(struct spi_device *spi)
 	return 0;
 
  error_probe:
+	destroy_workqueue(priv->wq);
+	priv->wq = NULL;
 	hi3110_power_enable(priv->power, 0);
 
  out_clk:

@@ -970,6 +968,9 @@ static void hi3110_can_remove(struct spi_device *spi)
 
 	hi3110_power_enable(priv->power, 0);
 
+	destroy_workqueue(priv->wq);
+	priv->wq = NULL;
+
 	clk_disable_unprepare(priv->clk);
 
 	free_candev(net);

2.51.0

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Duy Nguyen <[email protected]>

[ Upstream commit 5cff263606a10102a0ea19ff579eaa18fd5577ad ]

Driver configures register to choose controller mode before setting all channels to reset mode leading to failure. The patch corrects operation of mode setting.

---
 drivers/net/can/rcar/rcar_canfd.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

index e501b55678d1d..ae4ebcee60779 100644
@@ -738,9 +738,6 @@ static int rcar_canfd_reset_controller(struct rcar_canfd_global *gpriv)
 	/* Reset Global error flags */
 	rcar_canfd_write(gpriv->base, RCANFD_GERFL, 0x0);
 
-	/* Set the controller into appropriate mode */
-	rcar_canfd_set_mode(gpriv);
-
 	/* Transition all Channels to reset mode */
 	for_each_set_bit(ch, &gpriv->channels_mask, gpriv->info->max_channels) {
 		rcar_canfd_clear_bit(gpriv->base,

@@ -760,6 +757,10 @@ static int rcar_canfd_reset_controller(struct rcar_canfd_global *gpriv)
 			return err;
 		}
 	}
+
+	/* Set the controller into appropriate mode */
+	rcar_canfd_set_mode(gpriv);
+
 	return 0;
 }
 

2.51.0

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Christoffer Sandberg <[email protected]>

[ Upstream commit 12a3dd4d2cd9232d4e4df3b9a5b3d745db559941 ]

Prevents instant wakeup ~1s after suspend

---
 drivers/platform/x86/amd/pmc/pmc-quirks.c | 7 +++++++
 1 file changed, 7 insertions(+)

index b872baf35808f..9fd2829ee2ab4 100644
@@ -250,6 +250,13 @@ static const struct dmi_system_id fwbug_list[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "Lafite Pro V 14M"),
 		}
 	},
+	{
+		.ident = "TUXEDO Stellaris Slim 15 AMD Gen6",
+		.driver_data = &quirk_spurious_8042,
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "GMxHGxx"),
+		}
+	},
 	{
 		.ident = "TUXEDO InfinityBook Pro 14/15 AMD Gen10",
 		.driver_data = &quirk_spurious_8042,

2.51.0

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Takashi Iwai <[email protected]>

commit 0718a78f6a9f04b88d0dc9616cc216b31c5f3cf1 upstream.

The USB-audio MIDI code initializes the timer, but in a rare case, the driver might be freed without the disconnect call. This leaves the timer in an active state while the assigned object is released via snd_usbmidi_free(), which ends up with a kernel warning when the debug configuration is enabled, as spotted by fuzzer.

For avoiding the problem, put timer_shutdown_sync() at snd_usbmidi_free(), so that the timer can be killed properly. While we're at it, replace the existing timer_delete_sync() at the disconnect callback with timer_shutdown_sync(), too.

---
 sound/usb/midi.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -1530,6 +1530,7 @@ static void snd_usbmidi_free(struct snd_
 			snd_usbmidi_in_endpoint_delete(ep->in);
 	}
 	mutex_destroy(&umidi->mutex);
+	timer_shutdown_sync(&umidi->error_timer);
 	kfree(umidi);
 }
 

@@ -1553,7 +1554,7 @@ void snd_usbmidi_disconnect(struct list_
 	spin_unlock_irq(&umidi->disc_lock);
 	up_write(&umidi->disc_rwsem);
 
-	del_timer_sync(&umidi->error_timer);
+	timer_shutdown_sync(&umidi->error_timer);
 
 	for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) {
 		struct snd_usb_midi_endpoint *ep = &umidi->endpoints[i];

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Jeongjun Park <[email protected]>

commit 9f2c0ac1423d5f267e7f1d1940780fc764b0fee3 upstream.

The previous commit 0718a78f6a9f ("ALSA: usb-audio: Kill timer properly at removal") patched a UAF issue caused by the error timer.

However, because the error timer kill added in this patch occurs after the endpoint delete, a race condition to UAF still occurs, albeit rarely.

Additionally, since kill-cleanup for urb is also missing, freed memory can be accessed in interrupt context related to urb, which can cause UAF.

Therefore, to prevent this, error timer and urb must be killed before freeing the heap memory.

---
 sound/usb/midi.c |    9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

@@ -1522,15 +1522,14 @@ static void snd_usbmidi_free(struct snd_
 {
 	int i;
 
+	if (!umidi->disconnected)
+		snd_usbmidi_disconnect(&umidi->list);
+
 	for (i = 0; i < MIDI_MAX_ENDPOINTS; ++i) {
 		struct snd_usb_midi_endpoint *ep = &umidi->endpoints[i];
-		if (ep->out)
-			snd_usbmidi_out_endpoint_delete(ep->out);
-		if (ep->in)
-			snd_usbmidi_in_endpoint_delete(ep->in);
+		kfree(ep->out);
 	}
 	mutex_destroy(&umidi->mutex);
-	timer_shutdown_sync(&umidi->error_timer);
 	kfree(umidi);
 }
 

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Arnaud Lecomte <[email protected]>

commit b56cc41a3ae7323aa3c6165f93c32e020538b6d2 upstream.

As reported by syzbot, mcp2221_raw_event lacked validation of incoming I2C read data sizes, risking buffer overflows in mcp->rxbuf during multi-part transfers. As highlighted in the DS20005565B spec, p44, we have:
"The number of read-back data bytes to follow in this packet:
from 0 to a maximum of 60 bytes of read-back bytes." This patch enforces we don't exceed this limit.

---
 drivers/hid/hid-mcp2221.c |    4 ++++
 1 file changed, 4 insertions(+)

@@ -814,6 +814,10 @@ static int mcp2221_raw_event(struct hid_
 			}
 			if (data[2] == MCP2221_I2C_READ_COMPL ||
 			    data[2] == MCP2221_I2C_READ_PARTIAL) {
+				if (!mcp->rxbuf || mcp->rxbuf_idx < 0 || data[3] > 60) {
+					mcp->status = -EINVAL;
+					break;
+				}
 				buf = mcp->rxbuf;
 				memcpy(&buf[mcp->rxbuf_idx], &data[4], data[3]);
 				mcp->rxbuf_idx = mcp->rxbuf_idx + data[3];

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Raphael Gallais-Pou <[email protected]>

commit cc4d900d0d6d8dd5c41832a93ff3cfa629a78f9a upstream.

Console can be enabled on the UART compile as module.
Change dependency to allow console mode when the driver is built as module.

---
 drivers/tty/serial/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -1405,7 +1405,7 @@ config SERIAL_STM32
 
 config SERIAL_STM32_CONSOLE
 	bool "Support for console on STM32"
-	depends on SERIAL_STM32=y
+	depends on SERIAL_STM32
 	select SERIAL_CORE_CONSOLE
 	select SERIAL_EARLYCON
 

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ricardo Ribalda <[email protected]>

[ Upstream commit 8e1f5da59dd4a1966f859639860b803a7e8b8bfb ]

Make sure the firmware is released when we leave
xc_load_fw_and_init_tuner()

This change makes smatch happy:
drivers/media/tuners/xc5000.c:1213 xc_load_fw_and_init_tuner() warn: 'fw' from request_firmware() not released on lines: 1213.

Stable-dep-of: 40b7a19f321e ("media: tuner: xc5000: Fix use-after-free in xc5000_release")

---
 drivers/media/tuners/xc5000.c |   41 ++++++++++++++++++-----------------------
 1 file changed, 18 insertions(+), 23 deletions(-)

@@ -58,7 +58,7 @@ struct xc5000_priv {
 	struct dvb_frontend *fe;
 	struct delayed_work timer_sleep;
 
-	const struct firmware   *firmware;
+	bool inited;
 };
 
 /* Misc Defines */

@@ -1110,23 +1110,19 @@ static int xc_load_fw_and_init_tuner(str
 	if (!force && xc5000_is_firmware_loaded(fe) == 0)
 		return 0;
 
-	if (!priv->firmware) {
-		ret = request_firmware(&fw, desired_fw->name,
-					priv->i2c_props.adap->dev.parent);
-		if (ret) {
-			pr_err("xc5000: Upload failed. rc %d\n", ret);
-			return ret;
-		}
-		dprintk(1, "firmware read %zu bytes.\n", fw->size);
-
-		if (fw->size != desired_fw->size) {
-			pr_err("xc5000: Firmware file with incorrect size\n");
-			release_firmware(fw);
-			return -EINVAL;
-		}
-		priv->firmware = fw;
-	} else
-		fw = priv->firmware;
+	ret = request_firmware(&fw, desired_fw->name,
+			       priv->i2c_props.adap->dev.parent);
+	if (ret) {
+		pr_err("xc5000: Upload failed. rc %d\n", ret);
+		return ret;
+	}
+	dprintk(1, "firmware read %zu bytes.\n", fw->size);
+
+	if (fw->size != desired_fw->size) {
+		pr_err("xc5000: Firmware file with incorrect size\n");
+		release_firmware(fw);
+		return -EINVAL;
+	}
 
 	/* Try up to 5 times to load firmware */
 	for (i = 0; i < 5; i++) {

@@ -1204,6 +1200,7 @@ static int xc_load_fw_and_init_tuner(str
 	}
 
 err:
+	release_firmware(fw);
 	if (!ret)
 		printk(KERN_INFO "xc5000: Firmware %s loaded and running.\n",
 		       desired_fw->name);

@@ -1274,7 +1271,7 @@ static int xc5000_resume(struct dvb_fron
 
 	/* suspended before firmware is loaded.
 	   Avoid firmware load in resume path. */
-	if (!priv->firmware)
+	if (!priv->inited)
 		return 0;
 
 	return xc5000_set_params(fe);

@@ -1293,6 +1290,8 @@ static int xc5000_init(struct dvb_fronte
 	if (debug)
 		xc_debug_dump(priv);
 
+	priv->inited = true;
+
 	return 0;
 }
 

@@ -1306,10 +1305,6 @@ static void xc5000_release(struct dvb_fr
 
 	if (priv) {
 		cancel_delayed_work(&priv->timer_sleep);
-		if (priv->firmware) {
-			release_firmware(priv->firmware);
-			priv->firmware = NULL;
-		}
 		hybrid_tuner_release_state(priv);
 	}
 

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ovidiu Panait <[email protected]>

commit 52ff2b840bc723f3be1f096f8017c78e0515858c upstream.

Since commit 2ca34b508774 ("staging: axis-fifo: Correct handling of tx_fifo_depth for size validation"), write() operations with packets larger than 'tx_fifo_depth - 4' words are no longer rejected with -EINVAL.

Fortunately, the packets are not actually getting transmitted to hardware, otherwise they would be raising a 'Transmit Packet Overrun Error' interrupt, which requires a reset of the TX circuit to recover from.

Instead, the request times out inside wait_event_interruptible_timeout() and always returns -EAGAIN, since the wake up condition can never be true for these packets. But still, they unnecessarily block other tasks from writing to the FIFO and the EAGAIN return code signals userspace to retry the write() call, even though it will always fail and time out.

According to the AXI4-Stream FIFO reference manual (PG080), the maximum valid packet length is 'tx_fifo_depth - 4' words, so attempting to send larger packets is invalid and should not be happening in the first place:

Therefore, bring back the old behavior and outright reject packets larger than 'tx_fifo_depth - 4' with -EINVAL. Add a comment to explain why the check is necessary. The dev_err() message was removed to avoid cluttering the dmesg log if an invalid packet is received from userspace.

---
 drivers/staging/axis-fifo/axis-fifo.c |   14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

@@ -491,11 +491,17 @@ static ssize_t axis_fifo_write(struct fi
 		return -EINVAL;
 	}
 
-	if (words_to_write > fifo->tx_fifo_depth) {
-		dev_err(fifo->dt_device, "tried to write more words [%u] than slots in the fifo buffer [%u]\n",
-			words_to_write, fifo->tx_fifo_depth);
+	/*
+	 * In 'Store-and-Forward' mode, the maximum packet that can be
+	 * transmitted is limited by the size of the FIFO, which is
+	 * (C_TX_FIFO_DEPTH–4)*(data interface width/8) bytes.
+	 *
+	 * Do not attempt to send a packet larger than 'tx_fifo_depth - 4',
+	 * otherwise a 'Transmit Packet Overrun Error' interrupt will be
+	 * raised, which requires a reset of the TX circuit to recover.
+	 */
+	if (words_to_write > (fifo->tx_fifo_depth - 4))
 		return -EINVAL;
-	}
 
 	if (fifo->write_flags & O_NONBLOCK) {
 		/*

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ovidiu Panait <[email protected]>

commit 6d07bee10e4bdd043ec7152cbbb9deb27033c9e2 upstream.

If copy_from_user() fails, write() currently returns -EFAULT, but any partially written data leaves the TX FIFO in an inconsistent state. Subsequent write() calls then fail with "transmit length mismatch" errors.

Once partial data is written to the hardware FIFO, it cannot be removed without a TX reset. Commit c6e8d85fafa7 ("staging: axis-fifo: Remove hardware resets for user errors") removed a full FIFO reset for this case, which fixed a potential RX data loss, but introduced this TX issue.

Fix this by introducing a bounce buffer: copy the full packet from userspace first, and write to the hardware FIFO only if the copy was successful.

---
 drivers/staging/axis-fifo/axis-fifo.c |   36 +++++++++-------------------------
 1 file changed, 10 insertions(+), 26 deletions(-)

@@ -42,7 +42,6 @@
 #define DRIVER_NAME "axis_fifo"
 
 #define READ_BUF_SIZE 128U /* read buffer length in words */
-#define WRITE_BUF_SIZE 128U /* write buffer length in words */
 
 /* ----------------------------
  *     IP register offsets

@@ -471,11 +470,8 @@ static ssize_t axis_fifo_write(struct fi
 {
 	struct axis_fifo *fifo = (struct axis_fifo *)f->private_data;
 	unsigned int words_to_write;
-	unsigned int copied;
-	unsigned int copy;
-	unsigned int i;
+	u32 *txbuf;
 	int ret;
-	u32 tmp_buf[WRITE_BUF_SIZE];
 
 	if (len % sizeof(u32)) {
 		dev_err(fifo->dt_device,

@@ -540,32 +536,20 @@ static ssize_t axis_fifo_write(struct fi
 		}
 	}
 
-	/* write data from an intermediate buffer into the fifo IP, refilling
-	 * the buffer with userspace data as needed
-	 */
-	copied = 0;
-	while (words_to_write > 0) {
-		copy = min(words_to_write, WRITE_BUF_SIZE);
-
-		if (copy_from_user(tmp_buf, buf + copied * sizeof(u32),
-				   copy * sizeof(u32))) {
-			ret = -EFAULT;
-			goto end_unlock;
-		}
-
-		for (i = 0; i < copy; i++)
-			iowrite32(tmp_buf[i], fifo->base_addr +
-				  XLLF_TDFD_OFFSET);
-
-		copied += copy;
-		words_to_write -= copy;
+	txbuf = vmemdup_user(buf, len);
+	if (IS_ERR(txbuf)) {
+		ret = PTR_ERR(txbuf);
+		goto end_unlock;
 	}
 
-	ret = copied * sizeof(u32);
+	for (int i = 0; i < words_to_write; ++i)
+		iowrite32(txbuf[i], fifo->base_addr + XLLF_TDFD_OFFSET);
 
 	/* write packet size to fifo */
-	iowrite32(ret, fifo->base_addr + XLLF_TLR_OFFSET);
+	iowrite32(len, fifo->base_addr + XLLF_TLR_OFFSET);
 
+	ret = len;
+	kvfree(txbuf);
 end_unlock:
 	mutex_unlock(&fifo->write_lock);
 

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ovidiu Panait <[email protected]>

commit 82a051e2553b9e297cba82a975d9c538b882c79e upstream.

Flush stale data from the RX FIFO in case of errors, to avoid reading old data when new packets arrive.

Commit c6e8d85fafa7 ("staging: axis-fifo: Remove hardware resets for user errors") removed full FIFO resets from the read error paths, which fixed potential TX data losses, but introduced this RX issue.

---
 drivers/staging/axis-fifo/axis-fifo.c |   18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

@@ -396,6 +396,7 @@ static ssize_t axis_fifo_read(struct fil
 	}
 
 	bytes_available = ioread32(fifo->base_addr + XLLF_RLR_OFFSET);
+	words_available = bytes_available / sizeof(u32);
 	if (!bytes_available) {
 		dev_err(fifo->dt_device, "received a packet of length 0\n");
 		ret = -EIO;

@@ -406,7 +407,7 @@ static ssize_t axis_fifo_read(struct fil
 		dev_err(fifo->dt_device, "user read buffer too small (available bytes=%zu user buffer bytes=%zu)\n",
 			bytes_available, len);
 		ret = -EINVAL;
-		goto end_unlock;
+		goto err_flush_rx;
 	}
 
 	if (bytes_available % sizeof(u32)) {

@@ -415,11 +416,9 @@ static ssize_t axis_fifo_read(struct fil
 		 */
 		dev_err(fifo->dt_device, "received a packet that isn't word-aligned\n");
 		ret = -EIO;
-		goto end_unlock;
+		goto err_flush_rx;
 	}
 
-	words_available = bytes_available / sizeof(u32);
-
 	/* read data into an intermediate buffer, copying the contents
 	 * to userspace when the buffer is full
 	 */

@@ -431,18 +430,23 @@ static ssize_t axis_fifo_read(struct fil
 			tmp_buf[i] = ioread32(fifo->base_addr +
 					      XLLF_RDFD_OFFSET);
 		}
+		words_available -= copy;
 
 		if (copy_to_user(buf + copied * sizeof(u32), tmp_buf,
 				 copy * sizeof(u32))) {
 			ret = -EFAULT;
-			goto end_unlock;
+			goto err_flush_rx;
 		}
 
 		copied += copy;
-		words_available -= copy;
 	}
+	mutex_unlock(&fifo->read_lock);
+
+	return bytes_available;
 
-	ret = bytes_available;
+err_flush_rx:
+	while (words_available--)
+		ioread32(fifo->base_addr + XLLF_RDFD_OFFSET);
 
 end_unlock:
 	mutex_unlock(&fifo->read_lock);

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Rafael J. Wysocki <[email protected]>

commit c2ce2453413d429e302659abc5ace634e873f6f5 upstream.

Devices with power.no_pm set are not expected to need any power management at all, so modify device_set_pm_not_required() to set power.no_callbacks for them too in case runtime PM will be enabled for any of them (which in principle may be done for convenience if such a device participates in a dependency chain).

Since device_set_pm_not_required() must be called before device_add() or it would not have any effect, it can update power.no_callbacks without locking, unlike pm_runtime_no_callbacks() that can be called after registering the target device.

---
 include/linux/device.h |    3 +++
 1 file changed, 3 insertions(+)

@@ -968,6 +968,9 @@ static inline bool device_pm_not_require
 static inline void device_set_pm_not_required(struct device *dev)
 {
 	dev->power.no_pm = true;
+#ifdef CONFIG_PM
+	dev->power.no_callbacks = true;
+#endif
 }
 
 static inline void dev_pm_syscore_device(struct device *dev, bool val)

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Duoming Zhou <[email protected]>

[ Upstream commit 40b7a19f321e65789612ebaca966472055dab48c ]

The original code uses cancel_delayed_work() in xc5000_release(), which does not guarantee that the delayed work item timer_sleep has fully completed if it was already running. This leads to use-after-free scenarios where xc5000_release() may free the xc5000_priv while timer_sleep is still active and attempts to dereference the xc5000_priv.

A typical race condition is illustrated below:

CPU 0 (release thread)                 | CPU 1 (delayed work callback)
xc5000_release()                       | xc5000_do_timer_sleep()
  cancel_delayed_work()                |
  hybrid_tuner_release_state(priv)     |
    kfree(priv)                        |
                                       |   priv = container_of() // UAF

Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure that the timer_sleep is properly canceled before the xc5000_priv memory is deallocated.

A deadlock concern was considered: xc5000_release() is called in a process context and is not holding any locks that the timer_sleep work item might also need. Therefore, the use of the _sync() variant is safe here.

This bug was initially identified through static analysis.

---
 drivers/media/tuners/xc5000.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -1304,7 +1304,7 @@ static void xc5000_release(struct dvb_fr
 	mutex_lock(&xc5000_list_mutex);
 
 	if (priv) {
-		cancel_delayed_work(&priv->timer_sleep);
+		cancel_delayed_work_sync(&priv->timer_sleep);
 		hybrid_tuner_release_state(priv);
 	}
 

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Duoming Zhou <[email protected]>

[ Upstream commit 79d10f4f21a92e459b2276a77be62c59c1502c9d ]

The state->timer is a cyclic timer that schedules work_i2c_poll and delayed_work_enable_hotplug, while rearming itself. Using timer_delete() fails to guarantee the timer isn't still running when destroyed, similarly cancel_delayed_work() cannot ensure delayed_work_enable_hotplug has terminated if already executing. During probe failure after timer initialization, these may continue running as orphans and reference the already-freed tc358743_state object through tc358743_irq_poll_timer.

The following is the trace captured by KASAN.

BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0
Write of size 8 at addr ffff88800ded83c8 by task swapper/1/0
...
Call Trace:
 <IRQ>
 dump_stack_lvl+0x55/0x70
 print_report+0xcf/0x610
 ? __pfx_sched_balance_find_src_group+0x10/0x10
 ? __run_timer_base.part.0+0x7d7/0x8c0
 kasan_report+0xb8/0xf0
 ? __run_timer_base.part.0+0x7d7/0x8c0
 __run_timer_base.part.0+0x7d7/0x8c0
 ? rcu_sched_clock_irq+0xb06/0x27d0
 ? __pfx___run_timer_base.part.0+0x10/0x10
 ? try_to_wake_up+0xb15/0x1960
 ? tmigr_update_events+0x280/0x740
 ? _raw_spin_lock_irq+0x80/0xe0
 ? __pfx__raw_spin_lock_irq+0x10/0x10
 tmigr_handle_remote_up+0x603/0x7e0
 ? __pfx_tmigr_handle_remote_up+0x10/0x10
 ? sched_balance_trigger+0x98/0x9f0
 ? sched_tick+0x221/0x5a0
 ? _raw_spin_lock_irq+0x80/0xe0
 ? __pfx__raw_spin_lock_irq+0x10/0x10
 ? tick_nohz_handler+0x339/0x440
 ? __pfx_tmigr_handle_remote_up+0x10/0x10
 __walk_groups.isra.0+0x42/0x150
 tmigr_handle_remote+0x1f4/0x2e0
 ? __pfx_tmigr_handle_remote+0x10/0x10
 ? ktime_get+0x60/0x140
 ? lapic_next_event+0x11/0x20
 ? clockevents_program_event+0x1d4/0x2a0
 ? hrtimer_interrupt+0x322/0x780
 handle_softirqs+0x16a/0x550
 irq_exit_rcu+0xaf/0xe0
 sysvec_apic_timer_interrupt+0x70/0x80
 </IRQ>

...

Allocated by task 141:
 kasan_save_stack+0x24/0x50
 kasan_save_track+0x14/0x30
 __kasan_kmalloc+0x7f/0x90
 __kmalloc_node_track_caller_noprof+0x198/0x430
 devm_kmalloc+0x7b/0x1e0
 tc358743_probe+0xb7/0x610  i2c_device_probe+0x51d/0x880
 really_probe+0x1ca/0x5c0
 __driver_probe_device+0x248/0x310
 driver_probe_device+0x44/0x120
 __device_attach_driver+0x174/0x220
 bus_for_each_drv+0x100/0x190
 __device_attach+0x206/0x370
 bus_probe_device+0x123/0x170
 device_add+0xd25/0x1470
 i2c_new_client_device+0x7a0/0xcd0
 do_one_initcall+0x89/0x300
 do_init_module+0x29d/0x7f0
 load_module+0x4f48/0x69e0
 init_module_from_file+0xe4/0x150
 idempotent_init_module+0x320/0x670
 __x64_sys_finit_module+0xbd/0x120
 do_syscall_64+0xac/0x280
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Freed by task 141:
 kasan_save_stack+0x24/0x50
 kasan_save_track+0x14/0x30
 kasan_save_free_info+0x3a/0x60
 __kasan_slab_free+0x3f/0x50
 kfree+0x137/0x370
 release_nodes+0xa4/0x100
 devres_release_group+0x1b2/0x380
 i2c_device_probe+0x694/0x880
 really_probe+0x1ca/0x5c0
 __driver_probe_device+0x248/0x310
 driver_probe_device+0x44/0x120
 __device_attach_driver+0x174/0x220
 bus_for_each_drv+0x100/0x190
 __device_attach+0x206/0x370
 bus_probe_device+0x123/0x170
 device_add+0xd25/0x1470
 i2c_new_client_device+0x7a0/0xcd0
 do_one_initcall+0x89/0x300
 do_init_module+0x29d/0x7f0
 load_module+0x4f48/0x69e0
 init_module_from_file+0xe4/0x150
 idempotent_init_module+0x320/0x670
 __x64_sys_finit_module+0xbd/0x120
 do_syscall_64+0xac/0x280
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

...

Replace timer_delete() with timer_delete_sync() and cancel_delayed_work() with cancel_delayed_work_sync() to ensure proper termination of timer and work items before resource cleanup.

This bug was initially identified through static analysis. For reproduction and testing, I created a functional emulation of the tc358743 device via a kernel module and introduced faults through the debugfs interface.

---
 drivers/media/i2c/tc358743.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

@@ -2180,10 +2180,10 @@ static int tc358743_probe(struct i2c_cli
 err_work_queues:
 	cec_unregister_adapter(state->cec_adap);
 	if (!state->i2c_client->irq) {
-		del_timer(&state->timer);
+		timer_delete_sync(&state->timer);
 		flush_work(&state->work_i2c_poll);
 	}
-	cancel_delayed_work(&state->delayed_work_enable_hotplug);
+	cancel_delayed_work_sync(&state->delayed_work_enable_hotplug);
 	mutex_destroy(&state->confctl_mutex);
 err_hdl:
 	media_entity_cleanup(&sd->entity);

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Xiaowei Li <[email protected]>

commit 0e0ba0ecec3d6e819e0c2348331ff99afe2eb5d5 upstream.

Add support for SIMCom 8230C which is based on Qualcomm SDX35 chip.

USB Device Listings:

0x9071: tty (DM) + tty (NMEA) + tty (AT) + rmnet (QMI mode) + adb

T:  Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 10 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1e0e ProdID=9071 Rev= 5.15
S:  Manufacturer=SIMCOM
S:  Product=SDXBAAGHA-IDP _SN:D744C4C5
S:  SerialNumber=0123456789ABCDEF
C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=86(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x9078: tty (DM) + tty (NMEA) + tty (AT) + ECM + adb

T:  Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#=  9 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=1e0e ProdID=9078 Rev= 5.15
S:  Manufacturer=SIMCOM
S:  Product=SDXBAAGHA-IDP _SN:D744C4C5
S:  SerialNumber=0123456789ABCDEF
C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=86(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x907b: RNDIS + tty (DM) + tty (NMEA) + tty (AT) + adb

T:  Bus=01 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#=  8 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1e0e ProdID=907b Rev= 5.15
S:  Manufacturer=SIMCOM
S:  Product=SDXBAAGHA-IDP _SN:D744C4C5
S:  SerialNumber=0123456789ABCDEF

C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
A: FirstIf#= 0 IfCount= 2 Cls=ef(misc ) Sub=04 Prot=01
I:* If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=32ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host

E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

---
 drivers/usb/serial/option.c |    6 ++++++
 1 file changed, 6 insertions(+)

@@ -2114,6 +2114,12 @@ static const struct usb_device_id option
 	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9003, 0xff) },	/* Simcom SIM7500/SIM7600 MBIM mode */
 	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9011, 0xff),	/* Simcom SIM7500/SIM7600 RNDIS mode */
 	  .driver_info = RSVD(7) },
+	{ USB_DEVICE(0x1e0e, 0x9071),				/* Simcom SIM8230 RMNET mode */
+	  .driver_info = RSVD(3) | RSVD(4) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9078, 0xff),	/* Simcom SIM8230 ECM mode */
+	  .driver_info = RSVD(5) },
+	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x907b, 0xff),	/* Simcom SIM8230 RNDIS mode */
+	  .driver_info = RSVD(5) },
 	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9205, 0xff) },	/* Simcom SIM7070/SIM7080/SIM7090 AT+ECM mode */
 	{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9206, 0xff) },	/* Simcom SIM7070/SIM7080/SIM7090 AT-only mode */
 	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bitterblue Smith <[email protected]>

commit e798f2ac6040f46a04795d7de977341fa9aeabae upstream.

This ID appears to be RTL8188SU, not RTL8188CU. This is the wrong driver for RTL8188SU. The r8712u driver from staging used to handle this ID.

---
 drivers/net/wireless/realtek/rtlwifi/rtl8192cu/sw.c |    1 -
 1 file changed, 1 deletion(-)

@@ -294,7 +294,6 @@ static const struct usb_device_id rtl819
 	{RTL_USB_DEVICE(0x050d, 0x1102, rtl92cu_hal_cfg)}, /*Belkin - Edimax*/
 	{RTL_USB_DEVICE(0x050d, 0x11f2, rtl92cu_hal_cfg)}, /*Belkin - ISY*/
 	{RTL_USB_DEVICE(0x06f8, 0xe033, rtl92cu_hal_cfg)}, /*Hercules - Edimax*/
-	{RTL_USB_DEVICE(0x07b8, 0x8188, rtl92cu_hal_cfg)}, /*Abocom - Abocom*/
 	{RTL_USB_DEVICE(0x07b8, 0x8189, rtl92cu_hal_cfg)}, /*Funai - Abocom*/
 	{RTL_USB_DEVICE(0x0846, 0x9041, rtl92cu_hal_cfg)}, /*NetGear WNA1000M*/
 	{RTL_USB_DEVICE(0x0846, 0x9043, rtl92cu_hal_cfg)}, /*NG WNA1000Mv2*/

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Venkata Prasad Potturu <[email protected]>

[ Upstream commit f1d0260362d72f9f454dc1f9db2eeb80cb801f28 ]

Set pdm gain value by setting PDM_MISC_CTRL_MASK value. To avoid low pdm gain value.

---
 sound/soc/amd/acp/amd.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index d6cfae6ec5f74..3f1761755b866 100644
@@ -116,7 +116,7 @@
 #define PDM_DMA_INTR_MASK       0x10000
 #define PDM_DEC_64              0x2
 #define PDM_CLK_FREQ_MASK       0x07
-#define PDM_MISC_CTRL_MASK      0x10
+#define PDM_MISC_CTRL_MASK      0x18
 #define PDM_ENABLE              0x01
 #define PDM_DISABLE             0x00
 #define DMA_EN_MASK             0x02

2.51.0

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mikulas Patocka <[email protected]>

[ Upstream commit 77b8e6fbf9848d651f5cb7508f18ad0971f3ffdb ]

MAX_TAG_SIZE was 0x1a8 and it may be truncated in the "bi->metadata_size = ic->tag_size" assignment. We need to limit it to 255.

---
 drivers/md/dm-integrity.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

index 0bd76f8d4dc6b..6442d41622eff 100644
@@ -129,7 +129,7 @@ struct journal_sector {
 	commit_id_t commit_id;
 };
 
-#define MAX_TAG_SIZE			(JOURNAL_SECTOR_DATA - JOURNAL_MAC_PER_SECTOR - offsetof(struct journal_entry, last_bytes[MAX_SECTORS_PER_BLOCK]))
+#define MAX_TAG_SIZE			255
 
 #define METADATA_PADDING_SECTORS	8
 

2.51.0

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: aprilgrimoire <[email protected]>

[ Upstream commit 8822e8be86d40410ddd2ac8ff44f3050c9ecf9c6 ]

The firmware of Mechrevo Yilong15Pro emits a spurious keyboard interrupt on events including closing the lid. When a user closes the lid on an already suspended system this causes the system to wake up.
Add Mechrevo Yilong15Pro Series (GM5HG7A) to the list of quirk spurious_8042 to work around this issue.

---
 drivers/platform/x86/amd/pmc/pmc-quirks.c | 8 ++++++++
 1 file changed, 8 insertions(+)

index 6f5437d210a61..b872baf35808f 100644
@@ -233,6 +233,14 @@ static const struct dmi_system_id fwbug_list[] = {
 			DMI_MATCH(DMI_BOARD_NAME, "WUJIE14-GX4HRXL"),
 		}
 	},
+	{
+		.ident = "MECHREVO Yilong15Pro Series GM5HG7A",
+		.driver_data = &quirk_spurious_8042,
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "MECHREVO"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Yilong15Pro Series GM5HG7A"),
+		}
+	},
 	/* https://bugzilla.kernel.org/show_bug.cgi?id=220116 */
 	{
 		.ident = "PCSpecialist Lafite Pro V 14M",

2.51.0

This is the start of the stable review cycle for the 6.6.111 release. There are 28 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun, 12 Oct 2025 13:13:18 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v6.x/stable-review/patch-6.6.111-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-6.6.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 6.6.111-rc1

Sean Christopherson <[email protected]>
KVM: x86: Don't (re)check L1 intercepts when completing userspace I/O

Nalivayko Sergey <[email protected]>
net/9p: fix double req put in p9_fd_cancelled

Herbert Xu <[email protected]>
crypto: rng - Ensure set_ent is always present

Charlie Jenkins <[email protected]>
riscv: mm: Do not restrict mmap address based on hint

Charlie Jenkins <[email protected]>
riscv: mm: Use hint address in mmap if available

Rafael J. Wysocki <[email protected]>
driver core/PM: Set power.no_callbacks along with power.no_pm

Ovidiu Panait <[email protected]>
staging: axis-fifo: flush RX FIFO on read errors

Ovidiu Panait <[email protected]>
staging: axis-fifo: fix TX handling on copy_from_user() failure

Ovidiu Panait <[email protected]>
staging: axis-fifo: fix maximum TX packet length check

Raphael Gallais-Pou <[email protected]>
serial: stm32: allow selecting console when the driver is module

Arnaud Lecomte <[email protected]>
hid: fix I2C read buffer overflow in raw_event() for mcp2221

Jeongjun Park <[email protected]>
ALSA: usb-audio: fix race condition to UAF in snd_usbmidi_free

Takashi Iwai <[email protected]>
ALSA: usb-audio: Kill timer properly at removal

Christoffer Sandberg <[email protected]>
platform/x86/amd/pmc: Add Stellaris Slim Gen6 AMD to spurious 8042 quirks list

Duy Nguyen <[email protected]>
can: rcar_canfd: Fix controller mode setting

Chen Yufeng <[email protected]>
can: hi311x: fix null pointer dereference when resuming from sleep before interface was enabled

David Sterba <[email protected]>
btrfs: ref-verify: handle damaged extent root tree

Jack Yu <[email protected]>
ASoC: rt5682s: Adjust SAR ADC button mode to fix noise issue

hupu <[email protected]>
perf subcmd: avoid crash in exclude_cmds when excludes is empty

aprilgrimoire <[email protected]>
platform/x86/amd/pmc: Add MECHREVO Yilong15Pro to spurious_8042 list

Mikulas Patocka <[email protected]>
dm-integrity: limit MAX_TAG_SIZE to 255

Venkata Prasad Potturu <[email protected]>
ASoC: amd: acp: Adjust pdm gain value

Bitterblue Smith <[email protected]>

    wifi: rtlwifi: rtl8192cu: Don't claim USB ID 07b8:8188

Xiaowei Li <[email protected]>
USB: serial: option: add SIMCom 8230C compositions

Duoming Zhou <[email protected]>
media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe

Duoming Zhou <[email protected]>
media: tuner: xc5000: Fix use-after-free in xc5000_release

Ricardo Ribalda <[email protected]>
media: tunner: xc5000: Refactor firmware load

Will Deacon <[email protected]>
KVM: arm64: Fix softirq masking in FPSIMD register saving sequence

-------------

Diffstat:

 Makefile                                           |  4 +-
 arch/arm64/kernel/fpsimd.c                         |  8 ++-
 arch/riscv/include/asm/processor.h                 | 33 ++---------
 arch/x86/kvm/emulate.c                             |  9 ++-
 arch/x86/kvm/kvm_emulate.h                         |  3 +-
 arch/x86/kvm/x86.c                                 | 15 ++---
 crypto/rng.c                                       |  8 +++
 drivers/hid/hid-mcp2221.c                          |  4 ++
 drivers/md/dm-integrity.c                          |  2 +-
 drivers/media/i2c/tc358743.c                       |  4 +-
 drivers/media/tuners/xc5000.c                      | 41 ++++++-------
 drivers/net/can/rcar/rcar_canfd.c                  |  7 ++-
 drivers/net/can/spi/hi311x.c                       | 33 ++++++-----
 .../net/wireless/realtek/rtlwifi/rtl8192cu/sw.c    |  1 -
 drivers/platform/x86/amd/pmc/pmc-quirks.c          | 15 +++++
 drivers/staging/axis-fifo/axis-fifo.c              | 68 ++++++++++------------
 drivers/tty/serial/Kconfig                         |  2 +-
 drivers/usb/serial/option.c                        |  6 ++
 fs/btrfs/ref-verify.c                              |  9 ++-
 include/linux/device.h                             |  3 +
 net/9p/trans_fd.c                                  |  8 +--
 sound/soc/amd/acp/amd.h                            |  2 +-
 sound/soc/codecs/rt5682s.c                         | 17 +++---
 sound/usb/midi.c                                   | 10 ++--
 tools/lib/subcmd/help.c                            |  3 +
 25 files changed, 166 insertions(+), 149 deletions(-)

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Charlie Jenkins <[email protected]>

commit 2116988d5372aec51f8c4fb85bf8e305ecda47a0 upstream.

The hint address should not forcefully restrict the addresses returned by mmap as this causes mmap to report ENOMEM when there is memory still available.

---
 arch/riscv/include/asm/processor.h |   22 ++--------------------
 1 file changed, 2 insertions(+), 20 deletions(-)

@@ -15,30 +15,12 @@
 
 #define arch_get_mmap_end(addr, len, flags)			\
 ({								\
-	unsigned long mmap_end;					\
-	typeof(addr) _addr = (addr);				\
-	if ((_addr) == 0 ||					\
-	    (IS_ENABLED(CONFIG_COMPAT) && is_compat_task()) ||	\
-	    ((_addr + len) > BIT(VA_BITS - 1)))			\
-		mmap_end = STACK_TOP_MAX;			\
-	else							\
-		mmap_end = (_addr + len);			\
-	mmap_end;						\
+	STACK_TOP_MAX;						\
 })
 
 #define arch_get_mmap_base(addr, base)				\
 ({								\
-	unsigned long mmap_base;				\
-	typeof(addr) _addr = (addr);				\
-	typeof(base) _base = (base);				\
-	unsigned long rnd_gap = DEFAULT_MAP_WINDOW - (_base);	\
-	if ((_addr) == 0 ||					\
-	    (IS_ENABLED(CONFIG_COMPAT) && is_compat_task()) ||	\
-	    ((_addr + len) > BIT(VA_BITS - 1)))			\
-		mmap_base = (_base);				\
-	else							\
-		mmap_base = (_addr + len) - rnd_gap;		\
-	mmap_base;						\
+	base;							\
 })
 
 #ifdef CONFIG_64BIT

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Herbert Xu <[email protected]>

commit c0d36727bf39bb16ef0a67ed608e279535ebf0da upstream.

Ensure that set_ent is always set since only drbg provides it.

---
 crypto/rng.c |    8 ++++++++
 1 file changed, 8 insertions(+)

@@ -197,6 +197,11 @@ out:
 EXPORT_SYMBOL_GPL(crypto_del_default_rng);
 #endif
 
+static void rng_default_set_ent(struct crypto_rng *tfm, const u8 *data,
+				unsigned int len)
+{
+}
+
 int crypto_register_rng(struct rng_alg *alg)
 {
 	struct crypto_istat_rng *istat = rng_get_stat(alg);

@@ -212,6 +217,9 @@ int crypto_register_rng(struct rng_alg *
 	if (IS_ENABLED(CONFIG_CRYPTO_STATS))
 		memset(istat, 0, sizeof(*istat));
 
+	if (!alg->set_ent)
+		alg->set_ent = rng_default_set_ent;
+
 	return crypto_register_alg(base);
 }
 EXPORT_SYMBOL_GPL(crypto_register_rng);

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Nalivayko Sergey <[email protected]>

commit 674b56aa57f9379854cb6798c3bbcef7e7b51ab7 upstream.

Syzkaller reports a KASAN issue as below:

general protection fault, probably for non-canonical address 0xfbd59c0000000021: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: maybe wild-memory-access in range [0xdead000000000108-0xdead00000000010f]
CPU: 0 PID: 5083 Comm: syz-executor.2 Not tainted 6.1.134-syzkaller-00037-g855bd1d7d838 #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
RIP: 0010:__list_del include/linux/list.h:114 [inline]
RIP: 0010:__list_del_entry include/linux/list.h:137 [inline]
RIP: 0010:list_del include/linux/list.h:148 [inline]
RIP: 0010:p9_fd_cancelled+0xe9/0x200 net/9p/trans_fd.c:734

Call Trace:
 <TASK>
 p9_client_flush+0x351/0x440 net/9p/client.c:614
 p9_client_rpc+0xb6b/0xc70 net/9p/client.c:734
 p9_client_version net/9p/client.c:920 [inline]
 p9_client_create+0xb51/0x1240 net/9p/client.c:1027
 v9fs_session_init+0x1f0/0x18f0 fs/9p/v9fs.c:408
 v9fs_mount+0xba/0xcb0 fs/9p/vfs_super.c:126
 legacy_get_tree+0x108/0x220 fs/fs_context.c:632
 vfs_get_tree+0x8e/0x300 fs/super.c:1573
 do_new_mount fs/namespace.c:3056 [inline]
 path_mount+0x6a6/0x1e90 fs/namespace.c:3386
 do_mount fs/namespace.c:3399 [inline]
 __do_sys_mount fs/namespace.c:3607 [inline]
 __se_sys_mount fs/namespace.c:3584 [inline]
 __x64_sys_mount+0x283/0x300 fs/namespace.c:3584
 do_syscall_x64 arch/x86/entry/common.c:51 [inline]
 do_syscall_64+0x35/0x80 arch/x86/entry/common.c:81
 entry_SYSCALL_64_after_hwframe+0x6e/0xd8

This happens because of a race condition between:

- The 9p client sending an invalid flush request and later cleaning it up;
- The 9p client in p9_read_work() canceled all pending requests.

      Thread 1                              Thread 2
    ...
    p9_client_create()
    ...
    p9_fd_create()
    ...
    p9_conn_create()
    ...
    // start Thread 2
    INIT_WORK(&m->rq, p9_read_work);
                                        p9_read_work()
    ...
    p9_client_rpc()
    ...
                                        ...
                                        p9_conn_cancel()
                                        ...
                                        spin_lock(&m->req_lock);
    ...
    p9_fd_cancelled()
    ...
                                        ...
                                        spin_unlock(&m->req_lock);
                                        // status rewrite
                                        p9_client_cb(m->client, req, REQ_STATUS_ERROR)
                                        // first remove
                                        list_del(&req->req_list);
                                        ...

    spin_lock(&m->req_lock)
    ...
    // second remove
    list_del(&req->req_list);
    spin_unlock(&m->req_lock)

...

Commit 74d6a5d56629 ("9p/trans_fd: Fix concurrency del of req_list in p9_fd_cancelled/p9_read_work") fixes a concurrency issue in the 9p filesystem client where the req_list could be deleted simultaneously by both p9_read_work and p9_fd_cancelled functions, but for the case where req->status equals REQ_STATUS_RCVD.

Update the check for req->status in p9_fd_cancelled to skip processing not just received requests, but anything that is not SENT, as whatever changed the state from SENT also removed the request from its list.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Message-ID: <[email protected]>

---
 net/9p/trans_fd.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

@@ -719,10 +719,10 @@ static int p9_fd_cancelled(struct p9_cli
 	p9_debug(P9_DEBUG_TRANS, "client %p req %p\n", client, req);
 
 	spin_lock(&m->req_lock);
-	/* Ignore cancelled request if message has been received
-	 * before lock.
-	 */
-	if (req->status == REQ_STATUS_RCVD) {
+	/* Ignore cancelled request if status changed since the request was
+	 * processed in p9_client_flush()
+	*/
+	if (req->status != REQ_STATUS_SENT) {
 		spin_unlock(&m->req_lock);
 		return 0;
 	}

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sean Christopherson <[email protected]>

commit e750f85391286a4c8100275516973324b621a269 upstream.

When completing emulation of instruction that generated a userspace exit for I/O, don't recheck L1 intercepts as KVM has already finished that phase of instruction execution, i.e. has already committed to allowing L2 to perform I/O. If L1 (or host userspace) modifies the I/O permission bitmaps during the exit to userspace, KVM will treat the access as being intercepted despite already having emulated the I/O access.

Pivot on EMULTYPE_NO_DECODE to detect that KVM is completing emulation. Of the three users of EMULTYPE_NO_DECODE, only complete_emulated_io() (the intended "recipient") can reach the code in question. gp_interception()'s use is mutually exclusive with is_guest_mode(), and complete_emulated_insn_gp() unconditionally pairs EMULTYPE_NO_DECODE with EMULTYPE_SKIP.

The bad behavior was detected by a syzkaller program that toggles port I/O interception during the userspace I/O exit, ultimately resulting in a WARN on vcpu->arch.pio.count being non-zero due to KVM no completing emulation of the I/O instruction.

  WARNING: CPU: 23 PID: 1083 at arch/x86/kvm/x86.c:8039 emulator_pio_in_out+0x154/0x170 [kvm]
  Modules linked in: kvm_intel kvm irqbypass
  CPU: 23 UID: 1000 PID: 1083 Comm: repro Not tainted 6.16.0-rc5-c1610d2d66b1-next-vm #74 NONE
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
  RIP: 0010:emulator_pio_in_out+0x154/0x170 [kvm]
  PKRU: 55555554
  Call Trace:
   <TASK>
   kvm_fast_pio+0xd6/0x1d0 [kvm]
   vmx_handle_exit+0x149/0x610 [kvm_intel]
   kvm_arch_vcpu_ioctl_run+0xda8/0x1ac0 [kvm]
   kvm_vcpu_ioctl+0x244/0x8c0 [kvm]
   __x64_sys_ioctl+0x8a/0xd0
   do_syscall_64+0x5d/0xc60
   entry_SYSCALL_64_after_hwframe+0x4b/0x53
   </TASK>

---
 arch/x86/kvm/emulate.c     |    9 ++++-----
 arch/x86/kvm/kvm_emulate.h |    3 +--
 arch/x86/kvm/x86.c         |   15 ++++++++-------
 3 files changed, 13 insertions(+), 14 deletions(-)

@@ -5134,12 +5134,11 @@ void init_decode_cache(struct x86_emulat
 	ctxt->mem_read.end = 0;
 }
 
-int x86_emulate_insn(struct x86_emulate_ctxt *ctxt)
+int x86_emulate_insn(struct x86_emulate_ctxt *ctxt, bool check_intercepts)
 {
 	const struct x86_emulate_ops *ops = ctxt->ops;
 	int rc = X86EMUL_CONTINUE;
 	int saved_dst_type = ctxt->dst.type;
-	bool is_guest_mode = ctxt->ops->is_guest_mode(ctxt);
 
 	ctxt->mem_read.pos = 0;
 

@@ -5187,7 +5186,7 @@ int x86_emulate_insn(struct x86_emulate_
 				fetch_possible_mmx_operand(&ctxt->dst);
 		}
 
-		if (unlikely(is_guest_mode) && ctxt->intercept) {
+		if (unlikely(check_intercepts) && ctxt->intercept) {
 			rc = emulator_check_intercept(ctxt, ctxt->intercept,
 						      X86_ICPT_PRE_EXCEPT);
 			if (rc != X86EMUL_CONTINUE)

@@ -5216,7 +5215,7 @@ int x86_emulate_insn(struct x86_emulate_
 				goto done;
 		}
 
-		if (unlikely(is_guest_mode) && (ctxt->d & Intercept)) {
+		if (unlikely(check_intercepts) && (ctxt->d & Intercept)) {
 			rc = emulator_check_intercept(ctxt, ctxt->intercept,
 						      X86_ICPT_POST_EXCEPT);
 			if (rc != X86EMUL_CONTINUE)

@@ -5270,7 +5269,7 @@ int x86_emulate_insn(struct x86_emulate_
 
 special_insn:
 
-	if (unlikely(is_guest_mode) && (ctxt->d & Intercept)) {
+	if (unlikely(check_intercepts) && (ctxt->d & Intercept)) {
 		rc = emulator_check_intercept(ctxt, ctxt->intercept,
 					      X86_ICPT_POST_MEMACCESS);
 		if (rc != X86EMUL_CONTINUE)

@@ -220,7 +220,6 @@ struct x86_emulate_ops {
 	void (*set_nmi_mask)(struct x86_emulate_ctxt *ctxt, bool masked);
 
 	bool (*is_smm)(struct x86_emulate_ctxt *ctxt);
-	bool (*is_guest_mode)(struct x86_emulate_ctxt *ctxt);
 	int (*leave_smm)(struct x86_emulate_ctxt *ctxt);
 	void (*triple_fault)(struct x86_emulate_ctxt *ctxt);
 	int (*set_xcr)(struct x86_emulate_ctxt *ctxt, u32 index, u64 xcr);

@@ -498,7 +497,7 @@ bool x86_page_table_writing_insn(struct
 #define EMULATION_RESTART 1
 #define EMULATION_INTERCEPTED 2
 void init_decode_cache(struct x86_emulate_ctxt *ctxt);
-int x86_emulate_insn(struct x86_emulate_ctxt *ctxt);
+int x86_emulate_insn(struct x86_emulate_ctxt *ctxt, bool check_intercepts);
 int emulator_task_switch(struct x86_emulate_ctxt *ctxt,
 			 u16 tss_selector, int idt_index, int reason,
 			 bool has_error_code, u32 error_code);

@@ -8308,11 +8308,6 @@ static bool emulator_is_smm(struct x86_e
 	return is_smm(emul_to_vcpu(ctxt));
 }
 
-static bool emulator_is_guest_mode(struct x86_emulate_ctxt *ctxt)
-{
-	return is_guest_mode(emul_to_vcpu(ctxt));
-}
-
 #ifndef CONFIG_KVM_SMM
 static int emulator_leave_smm(struct x86_emulate_ctxt *ctxt)
 {

@@ -8379,7 +8374,6 @@ static const struct x86_emulate_ops emul
 	.guest_has_rdpid     = emulator_guest_has_rdpid,
 	.set_nmi_mask        = emulator_set_nmi_mask,
 	.is_smm              = emulator_is_smm,
-	.is_guest_mode       = emulator_is_guest_mode,
 	.leave_smm           = emulator_leave_smm,
 	.triple_fault        = emulator_triple_fault,
 	.set_xcr             = emulator_set_xcr,

@@ -8999,7 +8993,14 @@ restart:
 		ctxt->exception.address = 0;
 	}
 
-	r = x86_emulate_insn(ctxt);
+	/*
+	 * Check L1's instruction intercepts when emulating instructions for
+	 * L2, unless KVM is re-emulating a previously decoded instruction,
+	 * e.g. to complete userspace I/O, in which case KVM has already
+	 * checked the intercepts.
+	 */
+	r = x86_emulate_insn(ctxt, is_guest_mode(vcpu) &&
+				   !(emulation_type & EMULTYPE_NO_DECODE));
 
 	if (r == EMULATION_INTERCEPTED)
 		return 1;

6.6-stable review patch. If anyone has any objections, please let me know.

------------------

From: Charlie Jenkins <[email protected]>

commit b5b4287accd702f562a49a60b10dbfaf7d40270f upstream.

On riscv it is guaranteed that the address returned by mmap is less than the hint address. Allow mmap to return an address all the way up to addr, if provided, rather than just up to the lower address space.

This provides a performance benefit as well, allowing mmap to exit after checking that the address is in range rather than searching for a valid address.

It is possible to provide an address that uses at most the same number of bits, however it is significantly more computationally expensive to provide that number rather than setting the max to be the hint address. There is the instruction clz/clzw in Zbb that returns the highest set bit which could be used to performantly implement this, but it would still be slower than the current implementation. At worst case, half of the address would not be able to be allocated when a hint address is provided.

---
 arch/riscv/include/asm/processor.h |   27 +++++++++++----------------
 1 file changed, 11 insertions(+), 16 deletions(-)

@@ -13,22 +13,16 @@
 
 #include <asm/ptrace.h>
 
-#ifdef CONFIG_64BIT
-#define DEFAULT_MAP_WINDOW	(UL(1) << (MMAP_VA_BITS - 1))
-#define STACK_TOP_MAX		TASK_SIZE
-
 #define arch_get_mmap_end(addr, len, flags)			\
 ({								\
 	unsigned long mmap_end;					\
 	typeof(addr) _addr = (addr);				\
-	if ((_addr) == 0 || (IS_ENABLED(CONFIG_COMPAT) && is_compat_task())) \
+	if ((_addr) == 0 ||					\
+	    (IS_ENABLED(CONFIG_COMPAT) && is_compat_task()) ||	\
+	    ((_addr + len) > BIT(VA_BITS - 1)))			\
 		mmap_end = STACK_TOP_MAX;			\
-	else if ((_addr) >= VA_USER_SV57)			\
-		mmap_end = STACK_TOP_MAX;			\
-	else if ((((_addr) >= VA_USER_SV48)) && (VA_BITS >= VA_BITS_SV48)) \
-		mmap_end = VA_USER_SV48;			\
 	else							\
-		mmap_end = VA_USER_SV39;			\
+		mmap_end = (_addr + len);			\
 	mmap_end;						\
 })
 

@@ -38,17 +32,18 @@
 	typeof(addr) _addr = (addr);				\
 	typeof(base) _base = (base);				\
 	unsigned long rnd_gap = DEFAULT_MAP_WINDOW - (_base);	\
-	if ((_addr) == 0 || (IS_ENABLED(CONFIG_COMPAT) && is_compat_task())) \
+	if ((_addr) == 0 ||					\
+	    (IS_ENABLED(CONFIG_COMPAT) && is_compat_task()) ||	\
+	    ((_addr + len) > BIT(VA_BITS - 1)))			\
 		mmap_base = (_base);				\
-	else if (((_addr) >= VA_USER_SV57) && (VA_BITS >= VA_BITS_SV57)) \
-		mmap_base = VA_USER_SV57 - rnd_gap;		\
-	else if ((((_addr) >= VA_USER_SV48)) && (VA_BITS >= VA_BITS_SV48)) \
-		mmap_base = VA_USER_SV48 - rnd_gap;		\
 	else							\
-		mmap_base = VA_USER_SV39 - rnd_gap;		\
+		mmap_base = (_addr + len) - rnd_gap;		\
 	mmap_base;						\
 })
 
+#ifdef CONFIG_64BIT
+#define DEFAULT_MAP_WINDOW	(UL(1) << (MMAP_VA_BITS - 1))
+#define STACK_TOP_MAX		TASK_SIZE
 #else
 #define DEFAULT_MAP_WINDOW	TASK_SIZE
 #define STACK_TOP_MAX		TASK_SIZE

All tests passing for Tegra ...

Test results for stable-v6.6:

    10 builds:	10 pass, 0 fail
    28 boots:	28 pass, 0 fail
    120 tests:	120 pass, 0 fail

Linux version: 6.6.111-rc1-g65af00078567
Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000,

                tegra186-p3509-0000+p3636-0001, tegra194-p2972-0000,
                tegra194-p3509-0000+p3668-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra210-p3450-0000,
                tegra30-cardhu-a04

Jon

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

## Build
* kernel: 6.6.111-rc1
* git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
* git commit: 65af00078567f7e13108e6036a6bcba7f2c26892
* git describe: v6.6.109-37-g65af00078567
* test details:
https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-6.6.y/build/v6.6.109-37-g65af00078567

## Test Regressions (compared to v6.6.109-8-gc901132c8088)

## Metric Regressions (compared to v6.6.109-8-gc901132c8088)

## Test Fixes (compared to v6.6.109-8-gc901132c8088)

## Metric Fixes (compared to v6.6.109-8-gc901132c8088)

## Test result summary
total: 133027, pass: 113628, fail: 4440, skip: 14481, xfail: 478

## Build Summary
* arc: 5 total, 5 passed, 0 failed
* arm: 129 total, 128 passed, 1 failed
* arm64: 44 total, 40 passed, 4 failed
* i386: 23 total, 23 passed, 0 failed
* mips: 26 total, 25 passed, 1 failed
* parisc: 4 total, 4 passed, 0 failed
* powerpc: 32 total, 31 passed, 1 failed
* riscv: 15 total, 14 passed, 1 failed
* s390: 14 total, 13 passed, 1 failed
* sh: 10 total, 10 passed, 0 failed
* sparc: 7 total, 7 passed, 0 failed
* x86_64: 37 total, 34 passed, 3 failed

## Test suites summary
* boot
* commands
* kselftest-arm64
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-efivarfs
* kselftest-exec
* kselftest-fpu
* kselftest-ftrace
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-kcmp
* kselftest-kvm
* kselftest-livepatch
* kselftest-membarrier
* kselftest-memfd
* kselftest-mincore
* kselftest-mm
* kselftest-mqueue
* kselftest-net
* kselftest-net-mptcp
* kselftest-openat2
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-tc-testing
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user_events
* kselftest-vDSO
* kselftest-x86
* kunit
* kvm-unit-tests
* lava
* libgpiod
* libhugetlbfs
* log-parser-boot
* log-parser-build-clang
* log-parser-build-gcc
* log-parser-test
* ltp-capability
* ltp-commands
* ltp-containers
* ltp-controllers
* ltp-cpuhotplug
* ltp-crypto
* ltp-cve
* ltp-dio
* ltp-fcntl-locktests
* ltp-fs
* ltp-fs_bind
* ltp-fs_perms_simple
* ltp-hugetlb
* ltp-math
* ltp-mm
* ltp-nptl
* ltp-pty
* ltp-sched
* ltp-smoke
* ltp-syscalls
* ltp-tracing
* perf
* rcutorture

--
Linaro LKFT
https://lkft.linaro.org

Built and booted successfully on RISC-V RV64 (HiFive Unmatched).

# Librecast Test Results

010/010 [ OK ] libmld
120/120 [ OK ] liblibrecast

CPU/kernel: Linux auntie 6.6.111-rc1-g65af00078567 #105 SMP PREEMPT_DYNAMIC Sat Oct 11 17:01:57 -00 2025 x86_64 AMD Ryzen 9 9950X 16-Core Processor AuthenticAMD GNU/Linux

Am 10.10.2025 um 15:16 schrieb Greg Kroah-Hartman:

Builds, boots and works on my 2-socket Ivy Bridge Xeon E5-2697 v2 server. No dmesg oddities or regressions found.

Beste Grüße,
Peter Schneider

Climb the mountain not to plant your flag, but to embrace the challenge,
enjoy the air and behold the view. Climb it so you can see the world,
not so the world can see you.                    -- David McCullough Jr.

OpenPGP:  0xA3828BD796CCE11A8CADE8866E3A92C92C3FF244
Download: https://www.peters-netzplatz.de/download/pschneider1968_pub.asc
https://keys.mailvelope.com/pks/lookup?op=get&[email protected]
https://keys.mailvelope.com/pks/lookup?op=get&[email protected]

Boot-tested under QEMU for Rust x86_64:

um builds cleanly too.

Thanks!

Cheers,
Miguel