package/compliance-as-code: introduce new package
v3 cover package/compliance-as-code: introduce new package
Hello,
this is the v3 of the series bringing in Compliance As Code policies [1] (CaC) on a target. v2 has not received any new review since it has been sent, but in the mean time, I found some small issues (either at build time or runtime, due to a lack in my testing setup) so this new revision acts both as an update and a resend.
This project aims to provide security policy content on systems: this content brings data files describing checks standards and automations for system configuration. Those files come in various formats (XCCDF, OVAL, SCAP). This project is tightly coupled to the OpenSCAP tool [2]:
- to build the data files to embed on the target system
- and to perform analysis on the system, by consuming the data files
CaC then depends on both openscap and host-openscap.
The series brings in the following commits:
- commit 1 brings libxmsec1, one of openscap dependencies
- commit 2 brings back host-libcurl (which has been supported and later removed from BR, as there was no user anymore), since host-openscap needs host-libcurl
- commit 3 brings openscap package
- commit 4 brings CaC package
The new CaC package brings a minimal feature set for now: it only brings the security policy data files (ie: XML files) on the target. It can be extended later as needed to bring in for example generated bash script, ansible playbooks, etc.
Testing output:
$ ./utils/test-pkg -c cac.config -p compliance-as-code bootlin-armv5-uclibc [1/6]: OK bootlin-armv7-glibc [2/6]: OK bootlin-armv7m-uclibc [3/6]: SKIPPED bootlin-x86-64-musl [4/6]: OK br-arm-full-static [5/6]: SKIPPED arm-aarch64 [6/6]: OK
[1] https://github.com/ComplianceAsCode/content
[2] https://github.com/OpenSCAP/openscap
---
Changes in v3:
- added missing --disable-libpsl for host-libcurl to prevent build failure
- make openscap selects CONFIG_BR2_PACKAGE_PCRE_UTF to prevent runtime failure
- Link to v2: https://lore.kernel.org/r/[email protected]
Changes in v2:
- reworded commits titles and messages
- reformated, reordered content and/or cleaned multiple files
- added Kconfig comments for toolchain deps
- added missing DEVELOPERS entry
- fixed licensing issues for openscap
- disabled python3 in openscap
- removed some non existing KConfig dependencies and hooks
- fixed KConfig management in CaC .mk file
- updated install target in CaC to use cp
- introduced a simple runtime test for openscap/CaC
- Link to v1: https://lore.kernel.org/r/[email protected]
---
Alexis Lothoré (5):
package/libxmlsec1: new package
package/libcurl: Reapply "libcurl: add host variant" package/openscap: new package package/compliance-as-code: new package support/testing: add runtime testing for compliance-as-code
DEVELOPERS | 6 ++ package/Config.in | 3 + package/compliance-as-code/Config.in | 33 +++++++++++ package/compliance-as-code/compliance-as-code.hash | 4 ++ package/compliance-as-code/compliance-as-code.mk | 41 +++++++++++++ package/libcurl/libcurl.mk | 12 ++++ package/libxmlsec1/Config.in | 13 ++++ package/libxmlsec1/libxmlsec1.hash | 3 + package/libxmlsec1/libxmlsec1.mk | 32 ++++++++++ package/openscap/Config.in | 22 +++++++ package/openscap/openscap.hash | 3 + package/openscap/openscap.mk | 69 ++++++++++++++++++++++ .../tests/package/test_compliance_as_code.py | 23 ++++++++ 13 files changed, 264 insertions(+)
---
base-commit: 39ea74ffc7d6387af0a3040542008960c7cdbf2f
change-id: 20250724-openscap-7166fbe1571e
Best regards,
Signature · 8 lines
Alexis Lothoré, Bootlin Embedded Linux and Kernel engineering https://bootlin.com _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v3 1/5 package/libxmlsec1: new package
Introduce the libxmlsec1 library package. libxmlsec implements XML security standards.
The library has only a few mandatory dependencies(libxml2 and libxslt and a crypto library). It needs one of the following cryptographic
libraries: OpenSSL, NSS, or Gcrypt/GNUTLS. Default to openssl for now to keep the package simple.
---
Changes in v2:
- reword commit title
- add maintainer entry
- remove duplicate comment in hash file
- reformat conf opts list
- remove hardcoded static build conf opt
- properly duplicate conf opts for host variant
--- DEVELOPERS | 3 +++ package/Config.in | 1 + package/libxmlsec1/Config.in | 13 +++++++++++++ package/libxmlsec1/libxmlsec1.hash | 3 +++ package/libxmlsec1/libxmlsec1.mk | 32 ++++++++++++++++++++++++++++++++ 5 files changed, 52 insertions(+)
DEVELOPERS +3 -0
@@ -153,6 +153,9 @@ F: configs/cubieboard2_defconfig N: Alexey Lukyanchuk <[email protected]> F: package/zabbix/ +N: Alexis Lothoré <[email protected]> +F: package/libxmlsec1/ + N: Alistair Francis <[email protected]> F: board/sifive/ F: boot/opensbi/
package/Config.in +1 -0
@@ -1935,6 +1935,7 @@ menu "JSON/XML" source "package/libxmlb/Config.in" source "package/libxmlpp/Config.in" source "package/libxmlrpc/Config.in" + source "package/libxmlsec1/Config.in" source "package/libxslt/Config.in" source "package/libyaml/Config.in" source "package/mxml/Config.in"
package/libxmlsec1/Config.in new file +13 -0
@@ -0,0 +1,13 @@ +config BR2_PACKAGE_LIBXMLSEC1 + bool "libxmlsec1" + select BR2_PACKAGE_OPENSSL + select BR2_PACKAGE_LIBXML2 + select BR2_PACKAGE_LIBXSLT + help + XMLSec library provides C based implementation for major XML + Security standards: + - XML Signature Syntax and Processing + - XML Encryption Syntax and Processing + + https://www.aleksey.com/xmlsec/ + https://github.com/lsh123/xmlsec
package/libxmlsec1/libxmlsec1.hash new file +3 -0
@@ -0,0 +1,3 @@ +# Locally computed +sha256 d82e93b69b8aa205a616b62917a269322bf63a3eaafb3775014e61752b2013ea xmlsec1-1.3.7.tar.gz +sha256 d5e9388534256360c6a009d4f19ab2b8d6ec0aa7ff32a51e22d899ed7beb5c48 Copyright
package/libxmlsec1/libxmlsec1.mk new file +32 -0
@@ -0,0 +1,32 @@ +################################################################################ +# +# libxmlsec1 +# +################################################################################ + +LIBXMLSEC1_VERSION = 1.3.7 +LIBXMLSEC1_SOURCE = xmlsec1-$(LIBXMLSEC1_VERSION).tar.gz +LIBXMLSEC1_SITE = https://github.com/lsh123/xmlsec/releases/download/$(LIBXMLSEC1_VERSION) +LIBXMLSEC1_LICENSE = MIT +LIBXMLSEC1_LICENSE_FILES = Copyright +LIBXMLSEC1_INSTALL_STAGING = YES +LIBXMLSEC1_DEPENDENCIES = libxml2 libxslt openssl +HOST_LIBXMLSEC1_DEPENDENCIES = host-libxml2 host-libxslt host-openssl +LIBXMLSEC1_AUTORECONF = YES + +LIBXMLSEC1_CONF_OPTS = \ + --enable-crypto-dl=no \ + --with-openssl \ + --without-gnutls \ + --without-gcrypt \ + --without-nss + +HOST_LIBXMLSEC1_CONF_OPTS = \ + --enable-crypto-dl=no \ + --with-openssl \ + --without-gnutls \ + --without-gcrypt \ + --without-nss + +$(eval $(autotools-package)) +$(eval $(host-autotools-package))
Signature · 6 lines
2.51.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH v3 1/5] package/libxmlsec1: new package
Quoted 9 lines · Alexis Lothoré via buildroot
Introduce the libxmlsec1 library package. libxmlsec implements XML security standards.
The library has only a few mandatory dependencies(libxml2 and libxslt and a crypto library). It needs one of the following cryptographic
libraries: OpenSSL, NSS, or Gcrypt/GNUTLS. Default to openssl for now to keep the package simple.Signed-off-by Alexis Lothoré <[email protected]>
Thanks, applied, after updating to 1.3.9, since 1.3.7 was not building here (most likely due to gcc 15.x, but I haven't really investigated much since 1.3.9 built just fine).
Thanks!
Thomas
Signature · 7 lines
Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v3 2/5 package/libcurl: Reapply "libcurl: add host variant"
In reply to Alexis Lothoré via buildrootlibcurl host build support has initially been added with 736e0fc5d610 ("libcurl: add host variant") while adding support for host-cargo build, and reverted with 69e84008abf8 ("Revert "libcurl: add host variant"") when standalone cargo build has been removed. In order to bring a new host package depending on libcurl, re-enable host-libcurl build support. While doing so, remove the not-needed-anymore post-patch hook.
This reverts commit w9e84008abf87eaeeb3f2d53c880cf33492a3bf8.
---
Changes in v3:
- add --disable-libpsl
Changes in v2:
- remove the post-patch hook, as the corresponding command does not exist anymore
--- package/libcurl/libcurl.mk | 12 ++++++++++++ 1 file changed, 12 insertions(+)
package/libcurl/libcurl.mk +12 -0
@@ -189,4 +189,16 @@ endef LIBCURL_POST_INSTALL_TARGET_HOOKS += LIBCURL_TARGET_CLEANUP endif +HOST_LIBCURL_DEPENDENCIES = host-openssl +HOST_LIBCURL_CONF_OPTS = \ + --disable-manual \ + --disable-ntlm-wb \ + --disable-curldebug \ + --with-ssl \ + --without-gnutls \ + --without-mbedtls \ + --without-nss \ + --without-libpsl + $(eval $(autotools-package)) +$(eval $(host-autotools-package))
Signature · 6 lines
2.51.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH v3 2/5] package/libcurl: Reapply "libcurl: add host variant"
Quoted 6 lines · Alexis Lothoré via buildroot
libcurl host build support has initially been added with
736e0fc5d610("libcurl: add host variant") while adding support for host-cargo build, and reverted with69e84008abf8("Revert "libcurl: add host variant"") when standalone cargo build has been removed. In order to bring a new host package depending on libcurl, re-enable host-libcurl build support. While doing so, remove the not-needed-anymore post-patch hook.
Applied with some slight rewording of the commit message.
Thanks a lot!
Thomas
Signature · 7 lines
Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v3 3/5 package/openscap: new package
In reply to Alexis Lothoré via buildrootIntroduce the openscap package. openscap is a command line tool allowing to scan a system configuration to perform security compliance checks. The tool consumes XCCDF and OVAL files to perform system evaluation against a list of policies.
The package provides both a target and a host build configuration, as it is needed on both sides:
- it is needed on the host to allow building the security policy files to be embedded on the target
- it is needed on the target to actually parse and evaluate those security policy files.
---
Changes in v3:
- add missing CONFIG_BR2_PACKAGE_PCRE_UTF dependency to prevent runtime failure
Changes in v2:
- reword commit title and message
- add DEVELOPERS entry
- update comment on Config.in deps
- reorder and reformat various variables and Kconfig entries
- drop uneeded selects on host Config entries
- add a comment about the toolchain configuration in Config.in
- drop duplicate comment in hash file
- drop additional license file reference
- use assign rather than concat for package conf opts
- drop python dependency
--- DEVELOPERS | 1 + package/Config.in | 1 + package/openscap/Config.in | 22 ++++++++++++++ package/openscap/openscap.hash | 3 ++ package/openscap/openscap.mk | 69 ++++++++++++++++++++++++++++++++++++++++++ 5 files changed, 96 insertions(+)
DEVELOPERS +1 -0
@@ -155,6 +155,7 @@ F: package/zabbix/ N: Alexis Lothoré <[email protected]> F: package/libxmlsec1/ +F: package/openscap/ N: Alistair Francis <[email protected]> F: board/sifive/
package/Config.in +1 -0
@@ -2339,6 +2339,7 @@ menu "Security" source "package/libselinux/Config.in" source "package/libsemanage/Config.in" source "package/libsepol/Config.in" + source "package/openscap/Config.in" source "package/safeclib/Config.in" source "package/softhsm2/Config.in" endmenu
package/openscap/Config.in new file +22 -0
@@ -0,0 +1,22 @@ +config BR2_PACKAGE_OPENSCAP + bool "openscap" + depends on BR2_PACKAGE_LIBGPG_ERROR_ARCH_SUPPORTS # libgcrypt + depends on !BR2_STATIC_LIBS # dlfcn.h + select BR2_PACKAGE_LIBCURL + select BR2_PACKAGE_LIBGCRYPT + select BR2_PACKAGE_LIBXML2 + select BR2_PACKAGE_LIBXMLSEC1 + select BR2_PACKAGE_MUSL_FTS if !BR2_TOOLCHAIN_USES_GLIBC + select BR2_PACKAGE_OPENSSL + select BR2_PACKAGE_PCRE + select BR2_PACKAGE_PCRE_UTF + help + The purpose of this project is to create security policy + content for various platforms + + https://www.open-scap.org/ + https://github.com/OpenSCAP/openscap + +comment "openscap needs a toolchain w/ dynamic library" + depends on BR2_PACKAGE_LIBGPG_ERROR_ARCH_SUPPORTS + depends on BR2_STATIC_LIBS
package/openscap/openscap.hash new file +3 -0
@@ -0,0 +1,3 @@ +# Locally computed +sha256 6e61913fca3a74d310d7cf9354973eeaefa42be909ae649af1df48c3c08bc6ff openscap-1.3.12.tar.gz +sha256 5df07007198989c622f5d41de8d703e7bef3d0e79d62e24332ee739a452af62a COPYING
package/openscap/openscap.mk new file +69 -0
69 lines not on this page · raw message
Signature · 6 lines
2.51.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Re: [Buildroot] [PATCH v3 3/5] package/openscap: new package
Quoted 5 lines · Alexis Lothoré via buildroot
Introduce the openscap package. openscap is a command line tool allowing to scan a system configuration to perform security compliance checks. The tool consumes XCCDF and OVAL files to perform system evaluation against a list of policies.
Quoted 8 lines
The package provides both a target and a host build configuration, as it is needed on both sides:
- it is needed on the host to allow building the security policy files to be embedded on the target
- it is needed on the target to actually parse and evaluate those security policy files.Signed-off-by Alexis Lothoré <[email protected]>
Applied with the following changes:
[Thomas:
- Drop dependency on openssl, apparently not needed
- Depend on gcrypt if !nss, as either can be used
- Add missing dependency on libxslt]
Hopefully I didn't mess up with these changes (of course it builds fine, and your compliance-as-code test continues to work on top of this).
Thanks!
Thomas
Signature · 7 lines
Thomas Petazzoni, co-owner and CEO, Bootlin Embedded Linux and Kernel engineering and training https://bootlin.com _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v3 4/5 package/compliance-as-code: new package
In reply to Alexis Lothoré via buildrootIntroduce the Compliance As Code package. This project provides data files consumed by the openscap tool to evaluate a host compliance in regard with security policies. The package depends on both host-openscap (needed at build time to process the input files into usable files) and openscap (needed on the target, will use the generated files to evaluate the system configuration)
The project is based on cmake, but it also exposes a wrapper script (build_product). The package uses the cmake build system, but exposes a few Kconfig options to replicate some of the build_product options:
- BR2_PACKAGE_COMPLIANCE_AS_CODE_DATASTREAM_ONLY: replicates the -d option, building only the datastream files instead of all the files
- BR2_PACKAGE_COMPLIANCE_AS_CODE_PRODUCTS: allow selecting the product(s) for which we want to generate policies files.
The default install target provided by the project expects a full build, and so it will try to generate all the files for all the products when executed (which cancels the benefit of being able to select only a single or a few products), so the package defines a custom install command.
---
Changes in v2:
- reword commit title
- add entry to DEVELOPERS file
- remove non-relevant KConfig deps
- add comment about depends in Config.in
- remove FOO_REDISTRIBUTE = NO
- fix datastream-only build configuration management
- update install target to use cp rather than rsync
--- DEVELOPERS | 1 + package/Config.in | 1 + package/compliance-as-code/Config.in | 33 +++++++++++++++++ package/compliance-as-code/compliance-as-code.hash | 4 +++ package/compliance-as-code/compliance-as-code.mk | 41 ++++++++++++++++++++++ 5 files changed, 80 insertions(+)
DEVELOPERS +1 -0
@@ -156,6 +156,7 @@ F: package/zabbix/ N: Alexis Lothoré <[email protected]> F: package/libxmlsec1/ F: package/openscap/ +F: package/compliance-as-code/ N: Alistair Francis <[email protected]> F: board/sifive/
package/Config.in +1 -0
@@ -2335,6 +2335,7 @@ endif endmenu menu "Security" + source "package/compliance-as-code/Config.in" source "package/libapparmor/Config.in" source "package/libselinux/Config.in" source "package/libsemanage/Config.in"
package/compliance-as-code/Config.in new file +33 -0
@@ -0,0 +1,33 @@ +config BR2_PACKAGE_COMPLIANCE_AS_CODE + bool "compliance-as-code" + depends on BR2_PACKAGE_LIBGPG_ERROR_ARCH_SUPPORTS # openscap + depends on !BR2_STATIC_LIBS # dlfcn.h + select BR2_PACKAGE_OPENSCAP + help + Generate and install the profiles used for + security (e.g. FIPS, CSPN) compliance analysis. + + Uses ComplianceAsCode to generate profiles + https://complianceascode.readthedocs.io/en/latest/ + +comment "compliance-as-code needs a toolchain w/ dynamic library" + depends on BR2_PACKAGE_LIBGPG_ERROR_ARCH_SUPPORTS + depends on BR2_STATIC_LIBS + +if BR2_PACKAGE_COMPLIANCE_AS_CODE + +config BR2_PACKAGE_COMPLIANCE_AS_CODE_DATASTREAM_ONLY + bool "datastream only" + default y + help + Build only the datastreams (do not build the html tables, + guides, etc) + +config BR2_PACKAGE_COMPLIANCE_AS_CODE_PRODUCTS + string "products" + help + Provide a space-separated list of products for which you want + to build security content. Leave empty to build content for + all supported products. + +endif
package/compliance-as-code/compliance-as-code.hash new file +4 -0
@@ -0,0 +1,4 @@ + +# Locally computed +sha256 bb79e996035a1d985c49e5df8988a5d5f2310f5b3b5d49492f95a6845db00f43 compliance-as-code-0.1.77.tar.gz +sha256 ade633d5db670a58ff5f735c3602caafc72657a516416969fff79ff8a0c10298 LICENSE
package/compliance-as-code/compliance-as-code.mk new file +41 -0
41 lines not on this page · raw message
Signature · 6 lines
2.51.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
PATCH v3 5/5 support/testing: add runtime testing for compliance-as-code
In reply to Alexis Lothoré via buildrootAdd some basic runtime testing for openscap/compliance-as-code. By running a single command, we test that:
- the oscap binary is installed and can execute
- the compliance-as-code policy files are properly installed
- oscap can parse a policy file, and so those are correctly built
---
Changes in v2:
- new commit
--- DEVELOPERS | 1 + .../tests/package/test_compliance_as_code.py | 23 ++++++++++++++++++++++ 2 files changed, 24 insertions(+)
DEVELOPERS +1 -0
@@ -157,6 +157,7 @@ N: Alexis Lothoré <[email protected]> F: package/libxmlsec1/ F: package/openscap/ F: package/compliance-as-code/ +F: support/testing/tests/package/test_compliance_as_code.py N: Alistair Francis <[email protected]> F: board/sifive/
support/testing/tests/package/test_compliance_as_code.py new file +23 -0
@@ -0,0 +1,23 @@ +import os +from infra.basetest import BRTest, BASIC_TOOLCHAIN_CONFIG + + +class TestComplianceAsCode(BRTest): + config = BASIC_TOOLCHAIN_CONFIG + \ + """ + BR2_PACKAGE_COMPLIANCE_AS_CODE=y + BR2_PACKAGE_COMPLIANCE_AS_CODE_PRODUCTS="debian12" + BR2_TARGET_ROOTFS_CPIO=y + # BR2_TARGET_ROOTFS_TAR is not set + """ + + def test_run(self): + cpio_file = os.path.join(self.builddir, "images", "rootfs.cpio") + self.emulator.boot(arch="armv5", + kernel="builtin", + options=["-initrd", cpio_file]) + self.emulator.login() + + # Check that oscap can parse the generated datastream + self.assertRunOk( + "oscap info /etc/openscap/ssg-debian12-ds.xml", timeout=10)
Signature · 6 lines
2.51.0 _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
C2 - Confidential
Quoted 37 lines · Alexis Lothoré
Hello,
this is the v3 of the series bringing in Compliance As Code policies [1] (CaC) on a target. v2 has not received any new review since it has been sent, but in the mean time, I found some small issues (either at build time or runtime, due to a lack in my testing setup) so this new revision acts both as an update and a resend.This project aims to provide security policy content on systems: this content brings data files describing checks standards and automations for system configuration. Those files come in various formats (XCCDF, OVAL, SCAP). This project is tightly coupled to the OpenSCAP tool [2]:
- to build the data files to embed on the target system
- and to perform analysis on the system, by consuming the data filesCaC then depends on both openscap and host-openscap.
The series brings in the following commits:
- commit 1 brings libxmsec1, one of openscap dependencies
- commit 2 brings back host-libcurl (which has been supported and later removed from BR, as there was no user anymore), since host-openscap needs host-libcurl
- commit 3 brings openscap package
- commit 4 brings CaC packageThe new CaC package brings a minimal feature set for now: it only brings the security policy data files (ie: XML files) on the target. It can be extended later as needed to bring in for example generated bash script, ansible playbooks, etc.
Testing output:
$ ./utils/test-pkg -c cac.config -p compliance-as-code bootlin-armv5-uclibc [1/6]: OK bootlin-armv7-glibc [2/6]: OK bootlin-armv7m-uclibc [3/6]: SKIPPED bootlin-x86-64-musl [4/6]: OK br-arm-full-static [5/6]: SKIPPED arm-aarch64 [6/6]: OK
Quoted 4 lines
[1] https://github.com/ComplianceAsCode/content
[2] https://github.com/OpenSCAP/openscapSigned-off-by Alexis Lothoré <[email protected]>
--
Tim D. Hammer, Safran Trusted 4D
https://safran-navigation-timing.com/
_______________________________________________
buildroot mailing list
[email protected]
https://lists.buildroot.org/mailman/listinfo/buildroot
Hello,
Quoted 6 lines · Alexis Lothoré
Hello,
this is the v3 of the series bringing in Compliance As Code policies [1] (CaC) on a target. v2 has not received any new review since it has been sent, but in the mean time, I found some small issues (either at build time or runtime, due to a lack in my testing setup) so this new revision acts both as an update and a resend.
It's been a month since last revision, and aside from a R-B, no new request for change has been posted. Any new opinion on those additions ? If not, could we please move forward with this series ?
Thanks,
Alexis
Signature · 8 lines
Alexis Lothoré, Bootlin Embedded Linux and Kernel engineering https://bootlin.com _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot
Hello buildroot maintainers,
Quoted 10 lines · Alexis Lothoré
Hello,
Quoted 6 lines · Alexis Lothoré
Hello,
this is the v3 of the series bringing in Compliance As Code policies [1] (CaC) on a target. v2 has not received any new review since it has been sent, but in the mean time, I found some small issues (either at build time or runtime, due to a lack in my testing setup) so this new revision acts both as an update and a resend.
Quoted 3 lines
It's been a month since last revision, and aside from a R-B, no new request for change has been posted. Any new opinion on those additions ? If not, could we please move forward with this series ?
It's been now more than two months since by last ping, without any comment or change requesst on the series. What is preventing it from being merged ?
Thanks,
Alexis
Signature · 8 lines
Alexis Lothoré, Bootlin Embedded Linux and Kernel engineering https://bootlin.com _______________________________________________ buildroot mailing list [email protected] https://lists.buildroot.org/mailman/listinfo/buildroot