Skip to contentSkip to conversation

ASoC: SOF: pcm: Set the PCM device name for HDMI

PATCH In review Peter Ujfalusi 2 participants 2 messages Oct 29, 2025 – Oct 30, 2025

Subsystems (3)
lore
Share & tools
lore

Peter Ujfalusi

author maintainer
#0 lore raw

PATCH 1/1 ASoC: SOF: pcm: Set the PCM device name for HDMI

User space (alsa-lib) uses the PCM device name to detect HDMI devices, the name is expected to be in form of 'HDMI'+<space>+number.
The PCM device name is not configured in ASoC, only the PCM id is set based on the loaded topology.

Detect the HDMI PCM playback devices and configure the name to help user space to handle HDMI PCMs correctly.

aplay -l | grep HDMI (Audio capable monitor connected) Before the change:
card 0: sofhdadsp [sof-hda-dsp], device 3: HDMI1 (*) [] card 0: sofhdadsp [sof-hda-dsp], device 4: HDMI2 (*) [] card 0: sofhdadsp [sof-hda-dsp], device 5: HDMI3 (*) []

after the change:
card 0: sofhdadsp [sof-hda-dsp], device 3: HDMI1 (*) [DELL P1917S] card 0: sofhdadsp [sof-hda-dsp], device 4: HDMI2 (*) [HDMI 2] card 0: sofhdadsp [sof-hda-dsp], device 5: HDMI3 (*) [HDMI 3]

---
 sound/soc/sof/pcm.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
sound/soc/sof/pcm.c +18 -0
index fe43de1fe96c..cee04574264e 100644
@@ -613,6 +613,24 @@ static int sof_pcm_new(struct snd_soc_component *component,
 	snd_pcm_set_managed_buffer(pcm->streams[stream].substream,
 				   SNDRV_DMA_TYPE_DEV_SG, sdev->dev,
 				   0, le32_to_cpu(caps->buffer_size_max));
+
+	/* Set the PCM device name for HDMI playback */
+	if (!strncmp(pcm->id, "HDMI", 4)) {
+		int hdmi_idx;
+
+		/*
+		 * Make sure that the name is in"HDMI<SPACE>x" format as this is
+		 * expected by user space.
+		 * See alsa-lib's __snd_pcm_info_eld_fixup_check() which is
+		 * guarding the __snd_pcm_info_eld_fixup() in
+		 * snd_ctl_hw_pcm_info() and snd_pcm_hw_info() library functions
+		 */
+		if (sscanf(pcm->id, "HDMI%d", &hdmi_idx) == 1)
+			snprintf(pcm->name, sizeof(pcm->name), "HDMI %d",
+				 hdmi_idx);
+		else
+			strscpy(pcm->name, pcm->id, sizeof(pcm->name));
+	}
 capture:
 	stream = SNDRV_PCM_STREAM_CAPTURE;
 
Signature · 1 line
2.51.2
maintainer
#1 lore raw
Quoted 9 lines · Peter Ujfalusi

User space (alsa-lib) uses the PCM device name to detect HDMI devices, the name is expected to be in form of 'HDMI'+<space>+number.
The PCM device name is not configured in ASoC, only the PCM id is set based on the loaded topology.

Detect the HDMI PCM playback devices and configure the name to help user space to handle HDMI PCMs correctly.

[...]

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/1] ASoC: SOF: pcm: Set the PCM device name for HDMI

      commit: 541aecd34383a85eaf7c8556779466e394554fed

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark