ASoC: tas2781: Add tas5822 support
Baojun Xu
maintainerPATCH 1/2 ASoC: tas2781: Add tas5822 support
TAS5822 has on-chip DSP without current/voltage feedback.
--- include/sound/tas2781.h | 1 + sound/soc/codecs/tas2781-i2c.c | 7 ++++++- 2 files changed, 7 insertions(+), 1 deletion(-)
include/sound/tas2781.h +1 -0
@@ -122,6 +122,7 @@ enum audio_device {TAS2781 ,TAS5802 ,TAS5815 , +TAS5822 ,TAS5825 ,TAS5827 , TAS5828,
sound/soc/codecs/tas2781-i2c.c +6 -1
@@ -110,6 +110,7 @@ static const struct i2c_device_id tasdevice_id[] = { { "tas2781", TAS2781 }, { "tas5802", TAS5802 }, { "tas5815", TAS5815 }, + { "tas5822", TAS5822 }, { "tas5825", TAS5825 }, { "tas5827", TAS5827 }, { "tas5828", TAS5828 },
@@ -129,6 +130,7 @@ static const struct of_device_id tasdevice_of_match[] = { { .compatible = "ti,tas2781" }, { .compatible = "ti,tas5802" }, { .compatible = "ti,tas5815" }, + { .compatible = "ti,tas5822" }, { .compatible = "ti,tas5825" }, { .compatible = "ti,tas5827" }, { .compatible = "ti,tas5828" },
@@ -1672,7 +1674,7 @@ static void tasdevice_fw_ready(const struct firmware *fmw, tas_priv->fw_state =TASDEVICE_DSP_FW_ALL_OK ;/* There is no calibration required for -* TAS5802/TAS5815/TAS5825/TAS5827/TAS5828. +* TAS5802/TAS5815/TAS5822/TAS5825/TAS5827/TAS5828. */ if (tas_priv->chip_id <TAS5802 ) { ret =tasdevice_create_cali_ctrls (tas_priv);
@@ -1730,6 +1732,7 @@ static void tasdevice_fw_ready(const struct firmware *fmw,case TAS2781 :case TAS5802 :case TAS5815 : +case TAS5822 :case TAS5825 :case TAS5827 :case TAS5828 :
@@ -1895,6 +1898,7 @@ static int tasdevice_codec_probe(struct snd_soc_component *codec)break ;case TAS5802 :case TAS5815 : +case TAS5822 :case TAS5825 :case TAS5827 :case TAS5828 :
@@ -2070,6 +2074,7 @@ static const struct acpi_device_id tasdevice_acpi_match[] = { { "TXNW2781", TAS2781 }, { "TXNW5802", TAS5802 }, { "TXNW5815", TAS5815 }, + { "TXNW5822", TAS5822 }, { "TXNW5825", TAS5825 }, { "TXNW5827", TAS5827 }, { "TXNW5828", TAS5828 },
Signature · 1 line
2.25.1
Baojun Xu
maintainerPATCH 2/2 ASoC: dt-bindings: ti,tas2781: Add TAS5822 support
TAS5822 is in same family with TAS58XX.
--- .../devicetree/bindings/sound/ti,tas2781.yaml | 27 ++++++++++++++++--- 1 file changed, 23 insertions(+), 4 deletions(-)
Documentation/devicetree/bindings/sound/ti,tas2781.yaml +23 -4
@@ -24,10 +24,10 @@ description: | Instruments Smart Amp speaker protection algorithm. The integrated speaker voltage and current sense provides for real time monitoring of loudspeaker behavior. - The TAS5802/TAS5815/TAS5825/TAS5827/TAS5828 is a stereo, digital input - Class-D audio amplifier optimized for efficiently driving high peak - power into small loudspeakers. An integrated on-chip DSP supports - Texas Instruments Smart Amp speaker protection algorithm. + The TAS5802/TAS5815/TAS5822/TAS5825/TAS5827/TAS5828 is a stereo, + digital input Class-D audio amplifier optimized for efficiently driving + high peak power into small loudspeakers. An integrated on-chip DSP + supports Texas Instruments Smart Amp speaker protection algorithm. Specifications about the audio amplifier can be found at: https://www.ti.com/lit/gpn/tas2120
@@ -36,6 +36,7 @@ description: | https://www.ti.com/lit/gpn/tas2572 https://www.ti.com/lit/gpn/tas2781 https://www.ti.com/lit/gpn/tas5815 + https://www.ti.com/lit/gpn/tas5822m https://www.ti.com/lit/gpn/tas5825m https://www.ti.com/lit/gpn/tas5827 https://www.ti.com/lit/gpn/tas5828m
@@ -74,6 +75,9 @@ properties: ti,tas5815: 30-W, Digital Input, Stereo, Closed-loop Class-D Audio Amplifier with 96 kHz Enhanced Processing + ti,tas5822: 35-W, Digital Input, Stereo, Closed-Loop Class-D Audio + Amplifier with 96 kHz Enhanced Processing + ti,tas5825: 38-W Stereo, Inductor-Less, Digital Input, Closed-Loop 4.5V to 26.4V Class-D Audio Amplifier with 192-kHz Extended Audio Processing.
@@ -94,6 +98,7 @@ properties: - ti,tas2572 - ti,tas5802 - ti,tas5815 + - ti,tas5822 - ti,tas5825 - ti,tas5827 - ti,tas5828
@@ -207,6 +212,20 @@ allOf: minimum: 0x54 maximum: 0x57 + - if: + properties: + compatible: + contains: + enum: + - ti,tas5822 + then: + properties: + reg: + maxItems: 4 + items: + minimum: 0x2c + maximum: 0x2f + - if: properties: compatible:
Signature · 1 line
2.25.1
Re: [PATCH v1 2/2] ASoC: dt-bindings: ti,tas2781: Add TAS5822 support
Quoted 7 lines · Baojun Xu
TAS5822 is in same family with TAS58XX.
Signed-off-by Baojun Xu <[email protected]>--- .../devicetree/bindings/sound/ti,tas2781.yaml | 27 ++++++++++++++++--- 1 file changed, 23 insertions(+), 4 deletions(-)
Best regards,
Krzysztof
Mark Brown
maintainerQuoted 3 lines · Baojun Xu
TAS5822 has on-chip DSP without current/voltage feedback.
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/2] ASoC: tas2781: Add tas5822 support
commit: ecaba8b7990d8c6d8ba097cd4499b3b92d9df6ea
[2/2] ASoC: dt-bindings: ti,tas2781: Add TAS5822 support
commit: c4e68959af66df525d71db619ffe44af9178bb22All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark