arm64: dts: qcom: talos-evk: Add support for dual-channel LVDS panel
PATCH v2 1/1 arm64: dts: qcom: talos-evk: Add support for dual-channel LVDS panel
The QCS615-based Talos EVK platform supports a dual-channel LVDS display configuration using the TI SN65DSI84 DSI-to-LVDS bridge. This setup enables dual-link LVDS operation where channel A carries odd pixels and channel B carries even pixels.
A dedicated device tree variant is introduced to describe this specific hardware configuration. It extends the base Talos EVK device tree with the additional bridge node and display pipeline settings required for dual-channel LVDS operation.
---
Changes in v2:
- Renamed node 'lcd0_pwm_en' to 'lcd0-pwm-en' as per review feedback
- Restructured Talos DT hierarchy to avoid including a .dts file directly
- Updated 'talos-evk-lvds.dts' to include 'talos-evk-som.dtsi' and 'talos-evk-cb.dtsi'
arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/talos-evk-lvds.dts | 122 ++++++++++++++++++++ 2 files changed, 123 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/talos-evk-lvds.dts
arch/arm64/boot/dts/qcom/Makefile +1 -0
@@ -307,6 +307,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8750-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8750-qrd.dtb dtb-$(CONFIG_ARCH_QCOM) += talos-evk.dtb dtb-$(CONFIG_ARCH_QCOM) += talos-evk-dsi.dtb +dtb-$(CONFIG_ARCH_QCOM) += talos-evk-lvds.dtb x1e001de-devkit-el2-dtbs := x1e001de-devkit.dtb x1-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += x1e001de-devkit.dtb x1e001de-devkit-el2.dtb x1e78100-lenovo-thinkpad-t14s-el2-dtbs := x1e78100-lenovo-thinkpad-t14s.dtb x1-el2.dtbo
arch/arm64/boot/dts/qcom/talos-evk-lvds.dts new file +122 -0
122 lines not on this page · raw message
Signature · 1 line
2.34.1