Bluetooth: btusb: Add new VID/PID for RTL8852BE-VT
cover Bluetooth: btusb: Add new VID/PID for RTL8852BE-VT
This patch series adds new VID/PID support for RTL8852BE-VT.
Max Chou (3):
Bluetooth: btusb: Add new VID/PID 0x0489/0xE12F for RTL8852BE-VT
Bluetooth: btusb: Add new VID/PID 0x13d3/0x3618 for RTL8852BE-VT
Bluetooth: btusb: Add new VID/PID 0x13d3/0x3619 for RTL8852BE-VT
drivers/bluetooth/btusb.c | 6 ++++++ 1 file changed, 6 insertions(+)
Signature · 1 line
2.43.0
PATCH 1/3 Bluetooth: btusb: Add new VID/PID 0x0489/0xE12F for RTL8852BE-VT
Add the support ID(0x0489, 0xE12F) to usb_device_id table for Realtek RTL8852BE-VT.
The device info from /sys/kernel/debug/usb/devices as below.
T: Bus=04 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 86 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e12f Rev= 0.00 S: Manufacturer=Realtek S: Product=Bluetooth Radio S: SerialNumber=00e04c000001 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
--- drivers/bluetooth/btusb.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/bluetooth/btusb.c +2 -0
@@ -585,6 +585,8 @@ static const struct usb_device_id quirks_table[] = {/* Realtek 8852BT/8852BE-VT Bluetooth devices */ { USB_DEVICE(0x0bda, 0x8520), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0489, 0xe12f), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, /* Realtek 8922AE Bluetooth devices */ { USB_DEVICE(0x0bda, 0x8922), .driver_info = BTUSB_REALTEK |
Signature · 1 line
2.43.0
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1019714
---Test result---
Test Summary:
CheckPatch PENDING 0.39 seconds GitLint PENDING 0.30 seconds SubjectPrefix PASS 0.21 seconds BuildKernel PASS 25.73 seconds CheckAllWarning PASS 27.77 seconds CheckSparse PASS 31.36 seconds BuildKernel32 PASS 24.98 seconds TestRunnerSetup PASS 499.29 seconds TestRunner_l2cap-tester PASS 24.08 seconds TestRunner_iso-tester PASS 76.42 seconds TestRunner_bnep-tester PASS 6.09 seconds TestRunner_mgmt-tester FAIL 108.87 seconds TestRunner_rfcomm-tester PASS 9.16 seconds TestRunner_sco-tester PASS 14.26 seconds TestRunner_ioctl-tester PASS 9.89 seconds TestRunner_mesh-tester FAIL 11.46 seconds TestRunner_smp-tester PASS 8.39 seconds TestRunner_userchan-tester PASS 6.54 seconds IncrementalBuild PENDING 0.47 seconds
Details
##############################
Test: CheckPatch - PENDING
Desc: Run checkpatch.pl script Output:
##############################
Test: GitLint - PENDING
Desc: Run gitlint
Output:
##############################
Test: TestRunner_mgmt-tester - FAIL
Desc: Run mgmt-tester with test-runner Output:
Total: 490, Passed: 485 (99.0%), Failed: 1, Not Run: 4
Failed Test Cases
Read Exp Feature - Success Failed 0.099 seconds
##############################
Test: TestRunner_mesh-tester - FAIL
Desc: Run mesh-tester with test-runner Output:
Total: 10, Passed: 8 (80.0%), Failed: 2, Not Run: 0
Failed Test Cases
Mesh - Send cancel - 1 Timed out 2.066 seconds Mesh - Send cancel - 2 Timed out 1.995 seconds
##############################
Test: IncrementalBuild - PENDING
Desc: Incremental build with the patches in the series Output:
---
Regards,
Linux Bluetooth
PATCH 2/3 Bluetooth: btusb: Add new VID/PID 0x13d3/0x3618 for RTL8852BE-VT
In reply to Max ChouAdd the support ID(0x13d3, 0x3618) to usb_device_id table for Realtek RTL8852BE-VT.
The device info from /sys/kernel/debug/usb/devices as below.
T: Bus=04 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 86 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3618 Rev= 0.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms--- drivers/bluetooth/btusb.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/bluetooth/btusb.c +2 -0
@@ -587,6 +587,8 @@ static const struct usb_device_id quirks_table[] = { BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x0489, 0xe12f), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x13d3, 0x3618), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, /* Realtek 8922AE Bluetooth devices */ { USB_DEVICE(0x0bda, 0x8922), .driver_info = BTUSB_REALTEK |
Signature · 1 line
2.43.0
PATCH 3/3 Bluetooth: btusb: Add new VID/PID 0x13d3/0x3619 for RTL8852BE-VT
In reply to Max ChouAdd the support ID(0x13d3, 0x3619) to usb_device_id table for Realtek RTL8852BE-VT.
The device info from /sys/kernel/debug/usb/devices as below.
T: Bus=04 Lev=02 Prnt=02 Port=05 Cnt=01 Dev#= 86 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3619 Rev= 0.00
S: Manufacturer=Realtek
S: Product=Bluetooth Radio
S: SerialNumber=00e04c000001
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms--- drivers/bluetooth/btusb.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/bluetooth/btusb.c +2 -0
@@ -589,6 +589,8 @@ static const struct usb_device_id quirks_table[] = { BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3618), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x13d3, 0x3619), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, /* Realtek 8922AE Bluetooth devices */ { USB_DEVICE(0x0bda, 0x8922), .driver_info = BTUSB_REALTEK |
Signature · 1 line
2.43.0
This series was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:
Hello:
This series was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:
Quoted 8 lines · On Wed, 5 Nov 2025 13:50:38 +0800 you wrote:
This patch series adds new VID/PID support for RTL8852BE-VT.
Max Chou (3):
Bluetooth: btusb: Add new VID/PID 0x0489/0xE12F for RTL8852BE-VT
Bluetooth: btusb: Add new VID/PID 0x13d3/0x3618 for RTL8852BE-VT
Bluetooth: btusb: Add new VID/PID 0x13d3/0x3619 for RTL8852BE-VT[...]
Here is the summary with links:
- [1/3] Bluetooth: btusb: Add new VID/PID 0x0489/0xE12F for RTL8852BE-VT
https://git.kernel.org/bluetooth/bluetooth-next/c/234c42bfac07 - [2/3] Bluetooth: btusb: Add new VID/PID 0x13d3/0x3618 for RTL8852BE-VT https://git.kernel.org/bluetooth/bluetooth-next/c/121a21fd7599 - [3/3] Bluetooth: btusb: Add new VID/PID 0x13d3/0x3619 for RTL8852BE-VT https://git.kernel.org/bluetooth/bluetooth-next/c/92f51644e1cf
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html