mmc: sdhci-of-dwcmshc: Promote the th1520 reset handling to ip level
PATCH v2 1/1 mmc: sdhci-of-dwcmshc: Promote the th1520 reset handling to ip level
Commit 27e8fe0da3b7 ("mmc: sdhci-of-dwcmshc: Prevent stale command interrupt handling") clears pending interrupts when resetting host->pending_reset to ensure no pending stale interrupts after sdhci_threaded_irq restores interrupts. But this fix is only added for th1520 platforms, in fact per my test, this issue exists on all dwcmshc users, such as cv1800b, sg2002, and synaptics platforms.
So promote the above reset handling from th1520 to ip level. And keep reset handling on rk, sg2042 and bf3 as is, until it's confirmed that the same issue exists on these platforms too.
---
since v1:
- limit the promotion to only cv1800b, sg2002 and generic dwcmshc
drivers/mmc/host/sdhci-of-dwcmshc.c | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-)
drivers/mmc/host/sdhci-of-dwcmshc.c +17 -12
@@ -289,6 +289,19 @@ static void dwcmshc_adma_write_desc(struct sdhci_host *host, void **desc,sdhci_adma_write_desc (host, desc, addr, len, cmd); } +static void dwcmshc_reset (struct sdhci_host *host,u8 mask) +{ +sdhci_reset (host, mask); + +/* The dwcmshc does not comply with the SDHCI specification +* regarding the "Software Reset for CMD line should clear 'Command +* Complete' in the Normal Interrupt Status Register." Clear the bit +* here to compensate for this quirk. +*/ +if (mask &SDHCI_RESET_CMD ) +sdhci_writel (host,SDHCI_INT_RESPONSE ,SDHCI_INT_STATUS ); +} +static unsigned int dwcmshc_get_max_clock (struct sdhci_host *host) {struct sdhci_pltfm_host *pltfm_host =sdhci_priv (host);
@@ -832,15 +845,7 @@ static void th1520_sdhci_reset(struct sdhci_host *host, u8 mask)struct dwcmshc_priv *priv =sdhci_pltfm_priv (pltfm_host);u16 ctrl_2; -sdhci_reset (host, mask); - -/* The T-Head 1520 SoC does not comply with the SDHCI specification -* regarding the "Software Reset for CMD line should clear 'Command -* Complete' in the Normal Interrupt Status Register." Clear the bit -* here to compensate for this quirk. -*/ -if (mask &SDHCI_RESET_CMD ) -sdhci_writel (host,SDHCI_INT_RESPONSE ,SDHCI_INT_STATUS ); +dwcmshc_reset (host, mask);if (priv->flags &FLAG_IO_FIXED_1V8 ) { ctrl_2 =sdhci_readw (host,SDHCI_HOST_CONTROL2 );
@@ -886,7 +891,7 @@ static void cv18xx_sdhci_reset(struct sdhci_host *host, u8 mask)struct dwcmshc_priv *priv =sdhci_pltfm_priv (pltfm_host);u32 val, emmc_caps =MMC_CAP2_NO_SD |MMC_CAP2_NO_SDIO ; -sdhci_reset (host, mask); +dwcmshc_reset (host, mask);if ((host->mmc->caps2 & emmc_caps) == emmc_caps) { val =sdhci_readl (host, priv->vendor_specific_area1 +CV18XX_SDHCI_MSHC_CTRL );
@@ -958,7 +963,7 @@ static void cv18xx_sdhci_post_tuning(struct sdhci_host *host) val |=SDHCI_INT_DATA_AVAIL ;sdhci_writel (host, val,SDHCI_INT_STATUS ); -sdhci_reset (host,SDHCI_RESET_CMD |SDHCI_RESET_DATA ); +dwcmshc_reset (host,SDHCI_RESET_CMD |SDHCI_RESET_DATA ); }static int cv18xx_sdhci_execute_tuning (struct sdhci_host *host,u32 opcode)
@@ -1100,7 +1105,7 @@ static const struct sdhci_ops sdhci_dwcmshc_ops = { .set_bus_width = sdhci_set_bus_width, .set_uhs_signaling = dwcmshc_set_uhs_signaling, .get_max_clock = dwcmshc_get_max_clock, - .reset = sdhci_reset, + .reset = dwcmshc_reset, .adma_write_desc = dwcmshc_adma_write_desc, .irq = dwcmshc_cqe_irq_handler, };
Signature · 1 line
2.51.0
Quoted 8 lines · Jisheng Zhang
Commit
27e8fe0da3b7("mmc: sdhci-of-dwcmshc: Prevent stale command interrupt handling") clears pending interrupts when resettinghost->pending_resetto ensure no pending stale interrupts aftersdhci_threaded_irqrestores interrupts. But this fix is only added for th1520 platforms, in fact per my test, this issue exists on all dwcmshc users, such as cv1800b, sg2002, and synaptics platforms.
Quoted 6 lines
So promote the above reset handling from th1520 to ip level. And keep reset handling on rk, sg2042 and bf3 as is, until it's confirmed that the same issue exists on these platforms too.
Fixes 017199c2849c ("mmc: sdhci-of-dwcmshc: Add support for Sophgo CV1800B and SG2002")Signed-off-by Jisheng Zhang <[email protected]>
Applied for fixes and by adding a stable tag, thanks!
Kind regards
Uffe
Quoted 78 lines
---
since v1:
- limit the promotion to only cv1800b, sg2002 and generic dwcmshcdrivers/mmc/host/sdhci-of-dwcmshc.c | 29 +++++++++++++++++------------ 1 file changed, 17 insertions(+), 12 deletions(-)drivers/mmc/host/sdhci-of-dwcmshc.c +17
-13@@ -289,6 +289,19 @@ static void dwcmshc_adma_write_desc(struct sdhci_host *host, void **desc,sdhci_adma_write_desc (host, desc, addr, len, cmd); } +static void dwcmshc_reset (struct sdhci_host *host,u8 mask) +{ +sdhci_reset (host, mask); + +/* The dwcmshc does not comply with the SDHCI specification +* regarding the "Software Reset for CMD line should clear 'Command +* Complete' in the Normal Interrupt Status Register." Clear the bit +* here to compensate for this quirk. +*/ +if (mask &SDHCI_RESET_CMD ) +sdhci_writel (host,SDHCI_INT_RESPONSE ,SDHCI_INT_STATUS ); +} +static unsigned int dwcmshc_get_max_clock (struct sdhci_host *host) {struct sdhci_pltfm_host *pltfm_host =sdhci_priv (host);@@ -832,15 +845,7 @@ static void th1520_sdhci_reset(struct sdhci_host *host, u8 mask)struct dwcmshc_priv *priv =sdhci_pltfm_priv (pltfm_host);u16 ctrl_2; -sdhci_reset (host, mask); - -/* The T-Head 1520 SoC does not comply with the SDHCI specification -* regarding the "Software Reset for CMD line should clear 'Command -* Complete' in the Normal Interrupt Status Register." Clear the bit -* here to compensate for this quirk. -*/ -if (mask &SDHCI_RESET_CMD ) -sdhci_writel (host,SDHCI_INT_RESPONSE ,SDHCI_INT_STATUS ); +dwcmshc_reset (host, mask);if (priv->flags &FLAG_IO_FIXED_1V8 ) { ctrl_2 =sdhci_readw (host,SDHCI_HOST_CONTROL2 );@@ -886,7 +891,7 @@ static void cv18xx_sdhci_reset(struct sdhci_host *host, u8 mask)struct dwcmshc_priv *priv =sdhci_pltfm_priv (pltfm_host);u32 val, emmc_caps =MMC_CAP2_NO_SD |MMC_CAP2_NO_SDIO ; -sdhci_reset (host, mask); +dwcmshc_reset (host, mask);if ((host->mmc->caps2 & emmc_caps) == emmc_caps) { val =sdhci_readl (host, priv->vendor_specific_area1 +CV18XX_SDHCI_MSHC_CTRL );@@ -958,7 +963,7 @@ static void cv18xx_sdhci_post_tuning(struct sdhci_host *host) val |=SDHCI_INT_DATA_AVAIL ;sdhci_writel (host, val,SDHCI_INT_STATUS ); -sdhci_reset (host,SDHCI_RESET_CMD |SDHCI_RESET_DATA ); +dwcmshc_reset (host,SDHCI_RESET_CMD |SDHCI_RESET_DATA ); }static int cv18xx_sdhci_execute_tuning (struct sdhci_host *host,u32 opcode)@@ -1100,7 +1105,7 @@ static const struct sdhci_ops sdhci_dwcmshc_ops = { .set_bus_width = sdhci_set_bus_width, .set_uhs_signaling = dwcmshc_set_uhs_signaling, .get_max_clock = dwcmshc_get_max_clock, - .reset = sdhci_reset, + .reset = dwcmshc_reset, .adma_write_desc = dwcmshc_adma_write_desc, .irq = dwcmshc_cqe_irq_handler, }; --2.51.0