Skip to contentSkip to conversation

Anlogic Platform Initial Support

GIT PULL Conor Dooley 1 participant 2 messages Nov 19, 2025 – Nov 20, 2025 RISC-V

lore
Share & tools
lore
#0 lore raw

Hey folks,

This is my first PR for 6.19, and it's a wee bit in advance of the others just in case there's some objection that needs reworking. Krzysztof is probably already aware of what's going on here, but I threw the toys of the pram over the behaviour of the vendor here, and so appointed myself maintainer after the submitter decided they were not comfortable doing so any more. You can read the context here if you like:
https://lore.kernel.org/all/[email protected]/
I'm only there as Odd Fixes, and I hope that I can eventually hand this over to someone who cares about it specifically.
I consider what's here to otherwise be a bit on the premature side, with no clock, reset or pinctrl drivers, but the submitter of the initial support is currently working on that and I figured sorting out the maintainer thing made sending it at this point worthwhile.

Cheers,
Conor.

The following changes since commit 3a8660878839faadb4f1a6dd72c3179c1df56787:

Linux 6.18-rc1 (2025-10-12 13:42:36 -0700)

are available in the Git repository at:

https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/ tags/anlogic-initial-6.19

for you to fetch changes up to e6195b944089b779f421d390ad3422e05356f275:

MAINTAINERS: Setup support for Anlogic tree (2025-11-12 17:15:23 +0000)

----------------------------------------------------------------
Initial Anlogic Platform Support

Add bindings for the serial and timer peripherals, and a basic soc dtsi for the Anlogic dr1v90 SoC. The Milianke MLKPAI FS01 is the first board for this SoC. Add myself as maintainer for this platform for the time being.

----------------------------------------------------------------
Conor Dooley (1):
MAINTAINERS: Setup support for Anlogic tree

Junhui Liu (9):
dt-bindings: vendor-prefixes: Add Anlogic, Milianke and Nuclei
dt-bindings: riscv: Add Nuclei UX900 compatibles
dt-bindings: riscv: Add Anlogic DR1V90
dt-bindings: timer: Add Anlogic DR1V90 ACLINT MTIMER
dt-bindings: serial: snps-dw-apb-uart: Add Anlogic DR1V90 uart
riscv: Add Anlogic SoC famly Kconfig support
riscv: dts: Add initial Anlogic DR1V90 SoC device tree
riscv: dts: anlogic: Add Milianke MLKPAI FS01 board
riscv: defconfig: Enable Anlogic SoC

 Documentation/devicetree/bindings/riscv/anlogic.yaml                  |  27 +++++++++++++++++++++++++++
 Documentation/devicetree/bindings/riscv/cpus.yaml                     |   1 +
 Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml        |   1 +
 Documentation/devicetree/bindings/timer/thead,c900-aclint-mtimer.yaml |  17 +++++++++++------
 Documentation/devicetree/bindings/vendor-prefixes.yaml                |   6 ++++++
 MAINTAINERS                                                           |   8 ++++++++
 arch/riscv/Kconfig.socs                                               |   5 +++++
 arch/riscv/boot/dts/Makefile                                          |   1 +
 arch/riscv/boot/dts/anlogic/Makefile                                  |   2 ++
 arch/riscv/boot/dts/anlogic/dr1v90-mlkpai-fs01.dts                    |  28 ++++++++++++++++++++++++++++
 arch/riscv/boot/dts/anlogic/dr1v90.dtsi                               | 100 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/riscv/configs/defconfig                                          |   1 +
 12 files changed, 191 insertions(+), 6 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/riscv/anlogic.yaml
 create mode 100644 arch/riscv/boot/dts/anlogic/Makefile
 create mode 100644 arch/riscv/boot/dts/anlogic/dr1v90-mlkpai-fs01.dts
 create mode 100644 arch/riscv/boot/dts/anlogic/dr1v90.dtsi
#1 lore raw
Quoted 15 lines · Conor Dooley

Hey folks,

This is my first PR for 6.19, and it's a wee bit in advance of the others just in case there's some objection that needs reworking. Krzysztof is probably already aware of what's going on here, but I threw the toys of the pram over the behaviour of the vendor here, and so appointed myself maintainer after the submitter decided they were not comfortable doing so any more. You can read the context here if you like:
https://lore.kernel.org/all/[email protected]/
I'm only there as Odd Fixes, and I hope that I can eventually hand this over to someone who cares about it specifically.
I consider what's here to otherwise be a bit on the premature side, with no clock, reset or pinctrl drivers, but the submitter of the initial support is currently working on that and I figured sorting out the maintainer thing made sending it at this point worthwhile.

Stephen pointed out last night that the MAINTAINERS entry was in the wrong place. Here's an updated PR:

The following changes since commit 3a8660878839faadb4f1a6dd72c3179c1df56787:

Linux 6.18-rc1 (2025-10-12 13:42:36 -0700)

are available in the Git repository at:

https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/ tags/anlogic-initial-6.19-v2

for you to fetch changes up to d5c3f49b75832553ba0dafabc2d394a885106498:

MAINTAINERS: Setup support for Anlogic tree (2025-11-20 09:48:13 +0000)

----------------------------------------------------------------
Initial Anlogic Platform Support

Add bindings for the serial and timer peripherals, and a basic soc dtsi for the Anlogic dr1v90 SoC. The Milianke MLKPAI FS01 is the first board for this SoC. Add myself as maintainer for this platform for the time being.

----------------------------------------------------------------
Conor Dooley (1):
MAINTAINERS: Setup support for Anlogic tree

Junhui Liu (9):
dt-bindings: vendor-prefixes: Add Anlogic, Milianke and Nuclei
dt-bindings: riscv: Add Nuclei UX900 compatibles
dt-bindings: riscv: Add Anlogic DR1V90
dt-bindings: timer: Add Anlogic DR1V90 ACLINT MTIMER
dt-bindings: serial: snps-dw-apb-uart: Add Anlogic DR1V90 uart
riscv: Add Anlogic SoC famly Kconfig support
riscv: dts: Add initial Anlogic DR1V90 SoC device tree
riscv: dts: anlogic: Add Milianke MLKPAI FS01 board
riscv: defconfig: Enable Anlogic SoC

 Documentation/devicetree/bindings/riscv/anlogic.yaml                  |  27 +++++++++++++++++++++++++++
 Documentation/devicetree/bindings/riscv/cpus.yaml                     |   1 +
 Documentation/devicetree/bindings/serial/snps-dw-apb-uart.yaml        |   1 +
 Documentation/devicetree/bindings/timer/thead,c900-aclint-mtimer.yaml |  17 +++++++++++------
 Documentation/devicetree/bindings/vendor-prefixes.yaml                |   6 ++++++
 MAINTAINERS                                                           |   8 ++++++++
 arch/riscv/Kconfig.socs                                               |   5 +++++
 arch/riscv/boot/dts/Makefile                                          |   1 +
 arch/riscv/boot/dts/anlogic/Makefile                                  |   2 ++
 arch/riscv/boot/dts/anlogic/dr1v90-mlkpai-fs01.dts                    |  28 ++++++++++++++++++++++++++++
 arch/riscv/boot/dts/anlogic/dr1v90.dtsi                               | 100 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 arch/riscv/configs/defconfig                                          |   1 +
 12 files changed, 191 insertions(+), 6 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/riscv/anlogic.yaml
 create mode 100644 arch/riscv/boot/dts/anlogic/Makefile
 create mode 100644 arch/riscv/boot/dts/anlogic/dr1v90-mlkpai-fs01.dts
 create mode 100644 arch/riscv/boot/dts/anlogic/dr1v90.dtsi