video/efi: Support FIRMWARE_EDID on non-x86
Subsystems (7)
cover video/efi: Support FIRMWARE_EDID on non-x86
From: Ard Biesheuvel <[email protected]>
Refactor the screen_info handling so non-x86 platforms booting via the EFI stub also have access to the EDID data exposed by the EFI boot services.
Ard Biesheuvel (3):
efi: Wrap screen_info in efi_screen_info so edid_info can be added
later
video/edid: Use getter function for edid_info
efi: Add FIRMWARE_EDID support
arch/x86/kernel/setup.c | 8 ++++++-- drivers/firmware/efi/earlycon.c | 1 - drivers/firmware/efi/efi-init.c | 19 ++++++++++++++----- drivers/firmware/efi/libstub/efi-stub-entry.c | 3 +-- drivers/firmware/efi/libstub/efi-stub.c | 16 ++++++++++------ drivers/firmware/efi/libstub/efistub.h | 9 +++------ drivers/firmware/efi/libstub/gop.c | 1 - drivers/firmware/efi/libstub/screen_info.c | 7 +++---- drivers/firmware/efi/libstub/zboot.c | 2 +- drivers/firmware/efi/sysfb_efi.c | 1 - drivers/gpu/drm/sysfb/efidrm.c | 4 ++-- drivers/gpu/drm/sysfb/vesadrm.c | 4 ++-- drivers/video/Kconfig | 2 +- drivers/video/fbdev/core/fbmon.c | 4 ++-- include/linux/efi.h | 10 +++++++++- include/video/edid.h | 2 +- 16 files changed, 55 insertions(+), 38 deletions(-)
Signature · 1 line
2.52.0.rc1.455.g30608eb744-goog
PATCH 1/3 efi: Wrap screen_info in efi_screen_info so edid_info can be added later
From: Ard Biesheuvel <[email protected]>
Prepare for adding support to the EFI stub to pass edid_info discovered using EFI boot services to the kernel proper via a EFI configuration table. Instead of passing struct screen_info directly, define a new struct efi_screen_info that encapsulates it. struct edid_info will be added there later.
--- drivers/firmware/efi/earlycon.c | 1 - drivers/firmware/efi/efi-init.c | 11 ++++++----- drivers/firmware/efi/libstub/efi-stub-entry.c | 3 +-- drivers/firmware/efi/libstub/efi-stub.c | 9 ++++----- drivers/firmware/efi/libstub/efistub.h | 6 +++--- drivers/firmware/efi/libstub/gop.c | 1 - drivers/firmware/efi/libstub/screen_info.c | 7 +++---- drivers/firmware/efi/libstub/zboot.c | 2 +- drivers/firmware/efi/sysfb_efi.c | 1 - include/linux/efi.h | 6 +++++- 10 files changed, 23 insertions(+), 24 deletions(-)
drivers/firmware/efi/earlycon.c +0 -1
@@ -9,7 +9,6 @@#include <linux/io.h> #include <linux/kernel.h> #include <linux/serial_core.h> -#include <linux/screen_info.h> #include <linux/string.h> #include <asm/early_ioremap.h>
drivers/firmware/efi/efi-init.c +6 -5
@@ -19,7 +19,6 @@#include <linux/of_address.h> #include <linux/of_fdt.h> #include <linux/platform_device.h> -#include <linux/screen_info.h> #include <asm/efi.h>
@@ -61,13 +60,15 @@ extern __weak const efi_config_table_type_t efi_arch_tables[];* everything else can get it from here. */ #if !defined(CONFIG_X86 ) && (defined(CONFIG_SYSFB ) || defined(CONFIG_EFI_EARLYCON )) -struct screen_info screen_info __section(".data"); +struct efi_screen_info efi_screen_info __section(".data"); + +extern struct screen_info screen_info __alias(efi_screen_info);EXPORT_SYMBOL_GPL (screen_info);#endif static void __init init_screen_info (void ) { -struct screen_info *si; +struct efi_screen_info *si;if (screen_info_table !=EFI_INVALID_TABLE_ADDR ) { si =early_memremap (screen_info_table,sizeof (*si));
@@ -75,8 +76,8 @@ static void __init init_screen_info(void)pr_err ("Could not map screen_info config table\n" );return ; } - screen_info = *si; -memset (si,0 ,sizeof (*si)); + efi_screen_info = *si; + si->screen_info = (struct screen_info ){};early_memunmap (si,sizeof (*si));if (memblock_is_map_memory (screen_info.lfb_base))
drivers/firmware/efi/libstub/efi-stub-entry.c +1 -2
@@ -1,7 +1,6 @@// SPDX-License-Identifier: GPL-2.0-only #include <linux/efi.h> -#include <linux/screen_info.h> #include <asm/efi.h>
@@ -9,7 +8,7 @@static unsigned long screen_info_offset; -struct screen_info *alloc_screen_info (void ) +struct efi_screen_info *alloc_screen_info (void ) {if (IS_ENABLED (CONFIG_ARM ))return __alloc_screen_info ();
drivers/firmware/efi/libstub/efi-stub.c +4 -5
@@ -10,7 +10,6 @@*/ #include <linux/efi.h> -#include <linux/screen_info.h> #include <asm/efi.h> #include "efistub.h"
@@ -48,13 +47,13 @@static u64 virtmap_base =EFI_RT_VIRTUAL_BASE ;static bool flat_va_mapping = (EFI_RT_VIRTUAL_OFFSET !=0 ); -void __weak free_screen_info (struct screen_info *si) +void __weak free_screen_info (struct efi_screen_info *si) { } -static struct screen_info *setup_graphics (void ) +static struct efi_screen_info *setup_graphics (void ) { -struct screen_info *si, tmp = {}; +struct efi_screen_info *si, tmp = {};if (efi_setup_graphics (&tmp,NULL ) !=EFI_SUCCESS )return NULL ;
@@ -145,7 +144,7 @@ efi_status_t efi_stub_common(efi_handle_t handle,unsigned long image_addr, char *cmdline_ptr) { - struct screen_info *si; + struct efi_screen_info *si;efi_status_t status; status =check_platform_features ();
drivers/firmware/efi/libstub/efistub.h +3 -3
@@ -1175,9 +1175,9 @@ efi_enable_reset_attack_mitigation(void) { }void efi_retrieve_eventlog (void ); -struct screen_info *alloc_screen_info (void ); -struct screen_info *__alloc_screen_info (void ); -void free_screen_info (struct screen_info *si); +struct efi_screen_info *alloc_screen_info (void ); +struct efi_screen_info *__alloc_screen_info (void ); +void free_screen_info (struct efi_screen_info *si);void efi_cache_sync_image (unsigned long image_base,unsigned long alloc_size);
drivers/firmware/efi/libstub/gop.c +0 -1
@@ -8,7 +8,6 @@#include <linux/bitops.h> #include <linux/ctype.h> #include <linux/efi.h> -#include <linux/screen_info.h> #include <linux/string.h> #include <asm/efi.h> #include <asm/setup.h>
drivers/firmware/efi/libstub/screen_info.c +3 -4
@@ -1,7 +1,6 @@// SPDX-License-Identifier: GPL-2.0 #include <linux/efi.h> -#include <linux/screen_info.h> #include <asm/efi.h>
@@ -21,9 +20,9 @@static efi_guid_t screen_info_guid =LINUX_EFI_SCREEN_INFO_TABLE_GUID ; -struct screen_info *__alloc_screen_info (void ) +struct efi_screen_info *__alloc_screen_info (void ) { -struct screen_info *si; +struct efi_screen_info *si;efi_status_t status; status = efi_bs_call(allocate_pool, EFI_ACPI_RECLAIM_MEMORY,
@@ -43,7 +42,7 @@ struct screen_info *__alloc_screen_info(void)return NULL ; } -void free_screen_info (struct screen_info *si) +void free_screen_info (struct efi_screen_info *si) {if (!si)return ;
drivers/firmware/efi/libstub/zboot.c +1 -1
@@ -26,7 +26,7 @@ void __weak efi_cache_sync_image(unsigned long image_base,// executable code loaded into memory to be safe for execution. } -struct screen_info *alloc_screen_info (void ) +struct efi_screen_info *alloc_screen_info (void ) {return __alloc_screen_info (); }
drivers/firmware/efi/sysfb_efi.c +0 -1
@@ -22,7 +22,6 @@#include <linux/of_address.h> #include <linux/pci.h> #include <linux/platform_device.h> -#include <linux/screen_info.h> #include <linux/sysfb.h> #include <video/vga.h>
include/linux/efi.h +5 -1
@@ -27,7 +27,7 @@#include <asm/page.h> -struct screen_info ; +#include <linux/screen_info.h> #define EFI_SUCCESS 0#define EFI_LOAD_ERROR ( 1 | (1UL << (BITS_PER_LONG-1)))
@@ -1361,4 +1361,8 @@ extern struct blocking_notifier_head efivar_ops_nh;void efivars_generic_ops_register (void );void efivars_generic_ops_unregister (void ); +struct efi_screen_info { +struct screen_info screen_info; +}; +#endif /* _LINUX_EFI_H */
Signature · 1 line
2.52.0.rc1.455.g30608eb744-goog
PATCH 2/3 video/edid: Use getter function for edid_info
In reply to Ard BiesheuvelFrom: Ard Biesheuvel <[email protected]>
Avoid accessing a global writable buffer directly for edid_info, and instead, define a getter function returning a pointer to it. And considering that all callers access only the 'dummy' field, just return a const u8* directly.
This will be used by non-x86 EFI systems that pass edid_info via a EFI configuration table.
--- arch/x86/kernel/setup.c | 8 ++++++-- drivers/gpu/drm/sysfb/efidrm.c | 4 ++-- drivers/gpu/drm/sysfb/vesadrm.c | 4 ++-- drivers/video/fbdev/core/fbmon.c | 4 ++-- include/video/edid.h | 2 +- 5 files changed, 13 insertions(+), 9 deletions(-)
arch/x86/kernel/setup.c +6 -2
@@ -214,8 +214,12 @@ arch_initcall(init_x86_sysctl);struct screen_info screen_info;EXPORT_SYMBOL (screen_info);#if defined(CONFIG_FIRMWARE_EDID ) -struct edid_info edid_info; -EXPORT_SYMBOL_GPL (edid_info); +static struct edid_info edid_info__ro_after_init ; +const u8 *get_edid_info (void ) +{ +return edid_info.dummy; +} +EXPORT_SYMBOL_GPL (get_edid_info);#endif extern int root_mountflags;
drivers/gpu/drm/sysfb/efidrm.c +2 -2
@@ -203,8 +203,8 @@ static struct efidrm_device *efidrm_device_create(struct drm_driver *drv, &format->format, width, height, stride);#if defined(CONFIG_FIRMWARE_EDID ) -if (drm_edid_header_is_valid (edid_info.dummy) ==8 ) - sysfb->edid = edid_info.dummy; +if (drm_edid_header_is_valid (get_edid_info ()) ==8 ) + sysfb->edid =get_edid_info ();#endif sysfb->fb_mode =drm_sysfb_mode (width, height,0 ,0 ); sysfb->fb_format = format;
drivers/gpu/drm/sysfb/vesadrm.c +2 -2
@@ -469,8 +469,8 @@ static struct vesadrm_device *vesadrm_device_create(struct drm_driver *drv, }#if defined(CONFIG_FIRMWARE_EDID ) -if (drm_edid_header_is_valid (edid_info.dummy) ==8 ) - sysfb->edid = edid_info.dummy; +if (drm_edid_header_is_valid (get_edid_info ()) ==8 ) + sysfb->edid =get_edid_info ();#endif sysfb->fb_mode =drm_sysfb_mode (width, height,0 ,0 ); sysfb->fb_format = format;
drivers/video/fbdev/core/fbmon.c +2 -2
@@ -1495,7 +1495,7 @@ const unsigned char *fb_firmware_edid(struct device *device) {struct pci_dev *dev =NULL ;struct resource *res =NULL ; -unsigned char *edid =NULL ; +const unsigned char *edid =NULL ;if (device) dev =to_pci_dev (device);
@@ -1504,7 +1504,7 @@ const unsigned char *fb_firmware_edid(struct device *device) res = &dev->resource[PCI_ROM_RESOURCE ];if (res && res->flags &IORESOURCE_ROM_SHADOW ) - edid = edid_info.dummy; + edid =get_edid_info ();return edid; }
include/video/edid.h +1 -1
@@ -5,7 +5,7 @@#include <uapi/video/edid.h> #if defined(CONFIG_FIRMWARE_EDID ) -extern struct edid_info edid_info; +const u8 *get_edid_info (void ) __attribute_const__;#endif #endif /* __linux_video_edid_h__ */
Signature · 1 line
2.52.0.rc1.455.g30608eb744-goog
PATCH 3/3 efi: Add FIRMWARE_EDID support
In reply to Ard BiesheuvelFrom: Ard Biesheuvel <[email protected]>
Add support to non-x86 EFI systems for passing the EDID information discovered by the EFI stub to the kernel proper.
--- drivers/firmware/efi/efi-init.c | 8 ++++++++ drivers/firmware/efi/libstub/efi-stub.c | 7 ++++++- drivers/firmware/efi/libstub/efistub.h | 3 --- drivers/video/Kconfig | 2 +- include/linux/efi.h | 4 ++++ 5 files changed, 19 insertions(+), 5 deletions(-)
drivers/firmware/efi/efi-init.c +8 -0
@@ -64,6 +64,14 @@ struct efi_screen_info efi_screen_info __section(".data"); extern struct screen_info screen_info __alias(efi_screen_info);EXPORT_SYMBOL_GPL (screen_info); + +#ifdef CONFIG_FIRMWARE_EDID +const u8 *get_edid_info (void ) +{ +return efi_screen_info.edid_info.dummy; +} +EXPORT_SYMBOL_GPL (get_edid_info); +#endif #endif static void __init init_screen_info (void )
drivers/firmware/efi/libstub/efi-stub.c +6 -1
@@ -54,8 +54,13 @@ void __weak free_screen_info(struct efi_screen_info *si)static struct efi_screen_info *setup_graphics (void ) {struct efi_screen_info *si, tmp = {}; +struct edid_info *edid_info =NULL ; -if (efi_setup_graphics (&tmp,NULL ) !=EFI_SUCCESS ) +#ifdef CONFIG_FIRMWARE_EDID + edid_info = &tmp.edid_info; +#endif + +if (efi_setup_graphics (&tmp.screen_info, edid_info) !=EFI_SUCCESS )return NULL ; si =alloc_screen_info ();
drivers/firmware/efi/libstub/efistub.h +0 -3
@@ -34,9 +34,6 @@#define EFI_ALLOC_LIMIT ULONG_MAX#endif -struct edid_info ; -struct screen_info ; -extern bool efi_no5lvl;extern bool efi_nochunk;extern bool efi_nokaslr;
drivers/video/Kconfig +1 -1
@@ -63,7 +63,7 @@ endif # HAS_IOMEM config FIRMWARE_EDID bool "Enable firmware EDID" - depends on X86 + depends on X86 || EFI_GENERIC_STUB help This enables access to the EDID transferred from the firmware. On x86, this is from the VESA BIOS. DRM display drivers will
include/linux/efi.h +4 -0
@@ -28,6 +28,7 @@#include <asm/page.h> #include <linux/screen_info.h> +#include <video/edid.h> #define EFI_SUCCESS 0#define EFI_LOAD_ERROR ( 1 | (1UL << (BITS_PER_LONG-1)))
@@ -1363,6 +1364,9 @@ void efivars_generic_ops_unregister(void);struct efi_screen_info {struct screen_info screen_info; +#ifdef CONFIG_FIRMWARE_EDID +struct edid_info edid_info; +#endif };#endif /* _LINUX_EFI_H */
Signature · 1 line
2.52.0.rc1.455.g30608eb744-goog
Thomas Zimmermann
maintainerHi,
thanks for addressing the remaining EDID support.
First of all, you need to cc [email protected] on any further revisions.
Am 19.11.25 um 13:30 schrieb Ard Biesheuvel:
Quoted 5 lines
From: Ard Biesheuvel <[email protected]>
Refactor the
screen_infohandling so non-x86 platforms booting via the EFI stub also have access to the EDID data exposed by the EFI boot services.
I don't like how this series complicates everything to make non-x86 easier. But the general idea of using efi_screen_info goes into the right direction. It's just not generic enough.
The sysfb code transfers struct screen_info as device parameter [1]. Drivers later fetch it on probe [2]. The direct ref to the global edid_info [3] only exists because we have no means of transferring it as device data.
So instead of using efi_screen_info, let's declare struct sysfb_display with screen_info and edid_info. The header would be linux/sysfb.h. We transfer this to all related drivers. The generic EFI code would set it up like efi_screen_info and the x86 code would decalre it at [4]; replacing the existing state.
Best regards
Thomas
[1] https://elixir.bootlin.com/linux/v6.17.8/source/drivers/firmware/sysfb.c#L205
[2] https://elixir.bootlin.com/linux/v6.17.8/source/drivers/gpu/drm/sysfb/efidrm.c#L162
[3] https://elixir.bootlin.com/linux/v6.17.8/source/drivers/gpu/drm/sysfb/efidrm.c#L206
[4] https://elixir.bootlin.com/linux/v6.17.8/source/arch/x86/kernel/setup.c#L214
Quoted 28 lines
Cc Thomas Zimmermann <[email protected]>Cc Javier Martinez Canillas <[email protected]>Ard Biesheuvel (3):
efi: Wrapscreen_infoinefi_screen_infosoedid_infocan be added
later
video/edid: Use getter function foredid_info
efi: AddFIRMWARE_EDIDsupportarch/x86/kernel/setup.c | 8 ++++++-- drivers/firmware/efi/earlycon.c | 1 - drivers/firmware/efi/efi-init.c | 19 ++++++++++++++----- drivers/firmware/efi/libstub/efi-stub-entry.c | 3 +-- drivers/firmware/efi/libstub/efi-stub.c | 16 ++++++++++------ drivers/firmware/efi/libstub/efistub.h | 9 +++------ drivers/firmware/efi/libstub/gop.c | 1 - drivers/firmware/efi/libstub/screen_info.c | 7 +++---- drivers/firmware/efi/libstub/zboot.c | 2 +- drivers/firmware/efi/sysfb_efi.c | 1 - drivers/gpu/drm/sysfb/efidrm.c | 4 ++-- drivers/gpu/drm/sysfb/vesadrm.c | 4 ++-- drivers/video/Kconfig | 2 +- drivers/video/fbdev/core/fbmon.c | 4 ++-- include/linux/efi.h | 10 +++++++++- include/video/edid.h | 2 +- 16 files changed, 55 insertions(+), 38 deletions(-)
Signature · 6 lines
-- Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Frankenstr. 146, 90461 Nürnberg, Germany, www.suse.com GF: Jochen Jaser, Andrew McDonald, Werner Knoblich, (HRB 36809, AG Nürnberg)
Thomas Zimmermann
maintainerAm 20.11.25 um 08:56 schrieb Thomas Zimmermann:
Quoted 13 lines
Hi,
thanks for addressing the remaining EDID support.
First of all, you need to cc [email protected] on any further revisions.
Am 19.11.25 um 13:30 schrieb Ard Biesheuvel:
Quoted 5 lines
From: Ard Biesheuvel <[email protected]>
Refactor the
screen_infohandling so non-x86 platforms booting via the EFI stub also have access to the EDID data exposed by the EFI boot services.
Quoted 5 lines
I don't like how this series complicates everything to make non-x86 easier. But the general idea of using
efi_screen_infogoes into the right direction. It's just not generic enough.The sysfb code transfers struct
screen_infoas device parameter [1]. Drivers later fetch it on probe [2]. The direct ref to the globaledid_info[3] only exists because we have no means of transferring it as device data.So instead of using
efi_screen_info, let's declare structsysfb_displaywithscreen_infoand edid_info. The header would be linux/sysfb.h. We transfer this to all related drivers. The generic EFI code would set it up likeefi_screen_infoand the x86 code would decalre it at [4]; replacing the existing state.
If this proposal works for EFI, I could do the changes in graphics drivers and then resubmit the EDID series with an additional patch for generic EFI.
Quoted 39 lines
Best regards
Thomas[1] https://elixir.bootlin.com/linux/v6.17.8/source/drivers/firmware/sysfb.c#L205
[2] https://elixir.bootlin.com/linux/v6.17.8/source/drivers/gpu/drm/sysfb/efidrm.c#L162
[3] https://elixir.bootlin.com/linux/v6.17.8/source/drivers/gpu/drm/sysfb/efidrm.c#L206
[4] https://elixir.bootlin.com/linux/v6.17.8/source/arch/x86/kernel/setup.c#L214Quoted 28 lines
Cc Thomas Zimmermann <[email protected]>Cc Javier Martinez Canillas <[email protected]>Ard Biesheuvel (3):
efi: Wrapscreen_infoinefi_screen_infosoedid_infocan be added later
video/edid: Use getter function foredid_info
efi: AddFIRMWARE_EDIDsupportarch/x86/kernel/setup.c | 8 ++++++-- drivers/firmware/efi/earlycon.c | 1 - drivers/firmware/efi/efi-init.c | 19 ++++++++++++++-----
drivers/firmware/efi/libstub/efi-stub-entry.c| 3 +-- drivers/firmware/efi/libstub/efi-stub.c | 16 ++++++++++------ drivers/firmware/efi/libstub/efistub.h | 9 +++------ drivers/firmware/efi/libstub/gop.c | 1 - drivers/firmware/efi/libstub/screen_info.c | 7 +++---- drivers/firmware/efi/libstub/zboot.c | 2 +- drivers/firmware/efi/sysfb_efi.c | 1 - drivers/gpu/drm/sysfb/efidrm.c | 4 ++-- drivers/gpu/drm/sysfb/vesadrm.c | 4 ++-- drivers/video/Kconfig | 2 +- drivers/video/fbdev/core/fbmon.c | 4 ++-- include/linux/efi.h | 10 +++++++++- include/video/edid.h | 2 +-16 files changed, 55 insertions(+), 38 deletions(-)
Signature · 6 lines
-- Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Frankenstr. 146, 90461 Nürnberg, Germany, www.suse.com GF: Jochen Jaser, Andrew McDonald, Werner Knoblich, (HRB 36809, AG Nürnberg)
Ard Biesheuvel
maintainerQuoted 33 lines · Thomas Zimmermann
Am 20.11.25 um 08:56 schrieb Thomas Zimmermann:
Quoted 23 lines
Hi,
thanks for addressing the remaining EDID support.
First of all, you need to cc [email protected] on any further revisions.
Am 19.11.25 um 13:30 schrieb Ard Biesheuvel:
Quoted 5 lines
From: Ard Biesheuvel <[email protected]>
Refactor the
screen_infohandling so non-x86 platforms booting via the EFI stub also have access to the EDID data exposed by the EFI boot services.I don't like how this series complicates everything to make non-x86 easier. But the general idea of using
efi_screen_infogoes into the right direction. It's just not generic enough.The sysfb code transfers struct
screen_infoas device parameter [1]. Drivers later fetch it on probe [2]. The direct ref to the globaledid_info[3] only exists because we have no means of transferring it as device data.Quoted 5 lines
So instead of using
efi_screen_info, let's declare structsysfb_displaywithscreen_infoandedid_info. The header would belinux/sysfb.h. We transfer this to all related drivers. The generic EFI code would set it up likeefi_screen_infoand the x86 code would decalre it at [4]; replacing the existing state.
Quoted 4 lines
If this proposal works for EFI, I could do the changes in graphics drivers and then resubmit the EDID series with an additional patch for generic EFI.
That sounds great, thanks.
Thomas Zimmermann
maintainerHi
Am 20.11.25 um 09:25 schrieb Ard Biesheuvel:
Quoted 31 lines · Thomas Zimmermann
Quoted 30 lines
Am 20.11.25 um 08:56 schrieb Thomas Zimmermann:
Quoted 27 lines
Hi,
thanks for addressing the remaining EDID support.
First of all, you need to cc [email protected] on any further revisions.
Am 19.11.25 um 13:30 schrieb Ard Biesheuvel:
Quoted 5 lines
From: Ard Biesheuvel <[email protected]>
Refactor the
screen_infohandling so non-x86 platforms booting via the EFI stub also have access to the EDID data exposed by the EFI boot services.I don't like how this series complicates everything to make non-x86 easier. But the general idea of using
efi_screen_infogoes into the right direction. It's just not generic enough.The sysfb code transfers struct
screen_infoas device parameter [1]. Drivers later fetch it on probe [2]. The direct ref to the globaledid_info[3] only exists because we have no means of transferring it as device data.So instead of using
efi_screen_info, let's declare structsysfb_displaywithscreen_infoandedid_info. The header would belinux/sysfb.h. We transfer this to all related drivers. The generic EFI code would set it up likeefi_screen_infoand the x86 code would decalre it at [4]; replacing the existing state.
Quoted 5 lines
Quoted 4 lines
If this proposal works for EFI, I could do the changes in graphics drivers and then resubmit the EDID series with an additional patch for generic EFI.
That sounds great, thanks.
Series is out at https://lore.kernel.org/dri-devel/[email protected]/ Once/if merged, we can implement EDID support on top of it for all of EFI.
Best regards
Thomas
Signature · 6 lines
-- Thomas Zimmermann Graphics Driver Developer SUSE Software Solutions Germany GmbH Frankenstr. 146, 90461 Nürnberg, Germany, www.suse.com GF: Jochen Jaser, Andrew McDonald, Werner Knoblich, (HRB 36809, AG Nürnberg)