platform/x86: lenovo-wmi-{capdata,other}: Add HWMON for fan speed
Subsystems (5)
v6 cover platform/x86: lenovo-wmi-{capdata,other}: Add HWMON for fan speed
Lenovo WMI Other Mode interface also supports querying or setting fan speed RPM. This capability is decribed by LENOVO_CAPABILITY_DATA_00. Besides, LENOVO_FAN_TEST_DATA provides reference data for self-test of cooling fans, including minimum and maximum fan speed RPM.
This patchset turns lenovo-wmi-capdata01 into a unified driver (now named lenovo-wmi-capdata) for LENOVO_CAPABILITY_DATA_{00,01} and LENOVO_FAN_TEST_DATA; then adds HWMON support for lenovo-wmi-other:
- fanX_enable: enable/disable the fan (tunable)
- fanX_input: current RPM
- fanX_max: maximum RPM
- fanX_min: minimum RPM
- fanX_target: target RPM (tunable)
LENOVO_CAPABILITY_DATA_{00,01} presents on all devices, so both binds to lenovo-wmi-other. However, some device does not have LENOVO_FAN_TEST_DATA and its presence is described by LENOVO_CAPABILITY_DATA_00; hence, the former binds to the latter and a callback is used to pass the data to lenovo-wmi-other.
Summarizing this scheme:
lenovo-wmi-other <-> capdata00 <-> capdata_fan
|- master |- component
|- sub-master
|- sub-component
The callback will be called once both the master and the sub-component are bound to the sub-master (component).
This scheme is essential to solve these issues:
- The component framework only supports one aggregation per master
- A binding is only established until all components are found
- The Fan Test Data interface may be missing on some devices
- To get rid of queries for the presense of WMI GUIDs
capdata00 is registered as a component and a sub-master on probe, instead of chaining the registerations in one's bind callback. This is because calling (un)registration methods of the component framework causes deadlock in (un)bind callbacks, i.e., it's impossible to register capdata00 as a sub-master/component in its component/sub-master bind callback, and vice versa.
The implementation does not rely on a specific binding sequence. This has been fuzz-tested using:
#!/bin/bash
DRV_DIR=/sys/bus/wmi/drivers/lenovo_wmi_cd
CAPDATA_GUIDS=(
$(find "$DRV_DIR"/ -name '*-*-*-*-*-*' -printf "%f ")
)
b() { sudo tee "$DRV_DIR"/bind <<<"$1"; }
u() { sudo tee "$DRV_DIR"/unbind <<<"$1"; }
for guid in "${CAPDATA_GUIDS[@]}"; do
u "$guid"
done
while read -rsa perm; do
for guid in "${perm[@]}"; do
b "$guid"
done
sensors | grep -A3 lenovo_wmi_other || true
for guid in "${perm[@]}"; do
u "$guid"
done
done < <(python3 -c "
from itertools import permutations
ps = permutations('${CAPDATA_GUIDS[*]}'.split())
for p in ps: print(' '.join(p))")
for guid in "${CAPDATA_GUIDS[@]}"; do
b "$guid"
doneTested on ThinkBook 14 G7+ ASP.
Changes in v6:
- Fix mistaken error paths
- Link to v5: https://lore.kernel.org/r/[email protected]/
Changes in v5:
- Do not cast pointer to non-pointer or vice versa (thanks kernel test robot)
- Fix missing include (ditto)
- Link to v4: https://lore.kernel.org/r/[email protected]/
Changes in v4:
- Get rid of wmi_has_guid() (thanks Armin Wolf's inspiration)
- Add [PATCH v4 6/7], please review & test
- Check 0x04050000.supported and bind capdata_fan to capdata00
- Rework HWMON registration
- Collect fan info from capdata00 and capdata_fan separately
- Use a callback to collect fan info from capdata_fan
- Trigger HWMON registration only if all fan info is collected
- Do not check 0x04050000.supported, implied by the presense of capdata_fan
- Drop Reviewed-by & Tested-by from [PATCH v4 7/7] due to the changes, please review & test
- Link to v3: https://lore.kernel.org/r/[email protected]/
Changes in v3:
- Fix grammar (thanks Derek J. Clark)
- Link to v2: https://lore.kernel.org/r/[email protected]/
Changes in v2:
- Add a workaround for ACPI methods that return a 4B buffer for u32 (thanks Armin Wolf)
- Fix function documentation (thanks kernel test bot)
- Reword documentation (thanks Derek J. Clark)
- Squash min/max reporting patch into the initial HWMON one (ditto)
- Query 0x04050000 for interface availability (ditto)
- New parameter "expose_all_fans" to skip this check
- Enforce min/max RPM constraint on set (ditto)
- New parameter "relax_fan_constraint" to disable this behavior
- Drop parameter "ignore_fan_cap", superseded by the next one
- New parameter "expose_all_fans" to expose fans w/o such data
- Assume auto mode on probe (ditto)
- Do not register HWMON device if no fan can be exposed
- fanX_target: Return -EBUSY instead of raw target value when fan stops
- Link to v1: https://lore.kernel.org/r/[email protected]/
Rong Zhang (7):
platform/x86: lenovo-wmi-helpers: Convert returned buffer into u32 platform/x86: Rename lenovo-wmi-capdata01 to lenovo-wmi-capdata platform/x86: lenovo-wmi-{capdata,other}: Support multiple Capability
Data
platform/x86: lenovo-wmi-capdata: Add support for Capability Data 00 platform/x86: lenovo-wmi-capdata: Add support for Fan Test Data platform/x86: lenovo-wmi-capdata: Wire up Fan Test Data platform/x86: lenovo-wmi-other: Add HWMON for fan reporting/tuning
.../wmi/devices/lenovo-wmi-other.rst | 43 +- drivers/platform/x86/lenovo/Kconfig | 5 +- drivers/platform/x86/lenovo/Makefile | 2 +- drivers/platform/x86/lenovo/wmi-capdata.c | 811 ++++++++++++++++++ drivers/platform/x86/lenovo/wmi-capdata.h | 65 ++ drivers/platform/x86/lenovo/wmi-capdata01.c | 302 ------- drivers/platform/x86/lenovo/wmi-capdata01.h | 25 - drivers/platform/x86/lenovo/wmi-helpers.c | 22 +- drivers/platform/x86/lenovo/wmi-other.c | 511 ++++++++++- 9 files changed, 1429 insertions(+), 357 deletions(-) create mode 100644 drivers/platform/x86/lenovo/wmi-capdata.c create mode 100644 drivers/platform/x86/lenovo/wmi-capdata.h delete mode 100644 drivers/platform/x86/lenovo/wmi-capdata01.c delete mode 100644 drivers/platform/x86/lenovo/wmi-capdata01.h
base-commit: 2eba5e05d9bcf4cdea995ed51b0f07ba0275794a
Signature · 1 line
2.51.0
PATCH v6 1/7 platform/x86: lenovo-wmi-helpers: Convert returned buffer into u32
The Windows WMI-ACPI driver converts all ACPI objects into a common buffer format, so returning a buffer with four bytes will look like an integer for WMI consumers under Windows.
Therefore, some devices may simply implement the corresponding ACPI methods to always return a buffer. While lwmi_dev_evaluate_int() expects an integer (u32), convert returned >=4B buffer into u32 to support these devices.
---
Changes in v4:
- Accept oversized buffer (thanks Armin Wolf)
- Use get_unaligned_le32() (ditto)
Changes in v2:
- New patch (thanks Armin Wolf)
--- drivers/platform/x86/lenovo/wmi-helpers.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-)
drivers/platform/x86/lenovo/wmi-helpers.c +19 -3
@@ -21,6 +21,7 @@#include <linux/errno.h> #include <linux/export.h> #include <linux/module.h> +#include <linux/unaligned.h> #include <linux/wmi.h> #include "wmi-helpers.h"
@@ -59,10 +60,25 @@ int lwmi_dev_evaluate_int(struct wmi_device *wdev, u8 instance, u32 method_id,if (!ret_obj)return -ENODATA ; -if (ret_obj->type !=ACPI_TYPE_INTEGER ) -return -ENXIO ; +switch (ret_obj->type) { +/* +* The ACPI method may simply return a buffer when a u32 +* is expected. This is valid on Windows as its WMI-ACPI +* driver converts everything to a common buffer. +*/ +case ACPI_TYPE_BUFFER : { +if (ret_obj->buffer.length >=4 ) +return -ENXIO ; - *retval = (u32 )ret_obj->integer.value; + *retval =get_unaligned_le32 (ret_obj->buffer.pointer); +return 0 ; + } +case ACPI_TYPE_INTEGER : + *retval = (u32 )ret_obj->integer.value; +return 0 ; +default : +return -ENXIO ; + } }return 0 ;
Signature · 1 line
2.51.0
PATCH v6 2/7 platform/x86: Rename lenovo-wmi-capdata01 to lenovo-wmi-capdata
In reply to Rong ZhangPrepare for the upcoming changes to make it suitable to retrieve and provide other Capability Data as well.
---
drivers/platform/x86/lenovo/Kconfig | 4 +-
drivers/platform/x86/lenovo/Makefile | 2 +-
.../lenovo/{wmi-capdata01.c => wmi-capdata.c} | 124 +++++++++---------
.../lenovo/{wmi-capdata01.h => wmi-capdata.h} | 10 +-
drivers/platform/x86/lenovo/wmi-other.c | 11 +-
5 files changed, 78 insertions(+), 73 deletions(-)
rename drivers/platform/x86/lenovo/{wmi-capdata01.c => wmi-capdata.c} (60%)
rename drivers/platform/x86/lenovo/{wmi-capdata01.h => wmi-capdata.h} (60%)drivers/platform/x86/lenovo/Kconfig +2 -2
@@ -233,7 +233,7 @@ config YT2_1380 To compile this driver as a module, choose M here: the module will be called lenovo-yogabook. -config LENOVO_WMI_DATA01 +config LENOVO_WMI_DATA tristate depends on ACPI_WMI
@@ -264,7 +264,7 @@ config LENOVO_WMI_TUNING tristate "Lenovo Other Mode WMI Driver" depends on ACPI_WMI select FW_ATTR_CLASS - select LENOVO_WMI_DATA01 + select LENOVO_WMI_DATA select LENOVO_WMI_EVENTS select LENOVO_WMI_HELPERS help
drivers/platform/x86/lenovo/Makefile +1 -1
@@ -12,7 +12,7 @@ lenovo-target-$(CONFIG_LENOVO_YMC) += ymc.o lenovo-target-$(CONFIG_YOGABOOK) += yogabook.o lenovo-target-$(CONFIG_YT2_1380) += yoga-tab2-pro-1380-fastcharger.o lenovo-target-$(CONFIG_LENOVO_WMI_CAMERA) += wmi-camera.o -lenovo-target-$(CONFIG_LENOVO_WMI_DATA01) += wmi-capdata01.o +lenovo-target-$(CONFIG_LENOVO_WMI_DATA) += wmi-capdata.o lenovo-target-$(CONFIG_LENOVO_WMI_EVENTS) += wmi-events.o lenovo-target-$(CONFIG_LENOVO_WMI_HELPERS) += wmi-helpers.o lenovo-target-$(CONFIG_LENOVO_WMI_GAMEZONE) += wmi-gamezone.o
drivers/platform/x86/lenovo/wmi-capdata.c renamed from drivers/platform/x86/lenovo/wmi-capdata01.c +63 -61
275 lines not on this page · raw message
drivers/platform/x86/lenovo/wmi-capdata.h renamed from drivers/platform/x86/lenovo/wmi-capdata01.h +5 -5
@@ -2,13 +2,13 @@/* Copyright (C) 2025 Derek J. Clark <[email protected]> */ -#ifndef _LENOVO_WMI_CAPDATA01_H_ -#define _LENOVO_WMI_CAPDATA01_H_ +#ifndef _LENOVO_WMI_CAPDATA_H_ +#define _LENOVO_WMI_CAPDATA_H_ #include <linux/types.h> struct device; -struct cd01_list; +struct cd_list; struct capdata01 { u32 id;
@@ -19,7 +19,7 @@ struct capdata01 { u32 max_value; }; -int lwmi_cd01_get_data (struct cd01_list *list,u32 attribute_id,struct capdata01 *output); +int lwmi_cd01_get_data (struct cd_list *list,u32 attribute_id,struct capdata01 *output);int lwmi_cd01_match (struct device *dev,void *data); -#endif /* !_LENOVO_WMI_CAPDATA01_H_ */ +#endif /* !_LENOVO_WMI_CAPDATA_H_ */
drivers/platform/x86/lenovo/wmi-other.c +7 -4
@@ -34,7 +34,7 @@#include <linux/types.h> #include <linux/wmi.h> -#include "wmi-capdata01.h" +#include "wmi-capdata.h" #include "wmi-events.h" #include "wmi-gamezone.h" #include "wmi-helpers.h"
@@ -74,7 +74,10 @@ enum attribute_property {struct lwmi_om_priv {struct component_master_ops *ops; -struct cd01_list *cd01_list;/* only valid after capdata01 bind */ + +/* only valid after capdata bind */ +struct cd_list *cd01_list; +struct device *fw_attr_dev;struct kset *fw_attr_kset;struct notifier_block nb;
@@ -576,7 +579,7 @@ static void lwmi_om_fw_attr_remove(struct lwmi_om_priv *priv)static int lwmi_om_master_bind (struct device *dev) {struct lwmi_om_priv *priv =dev_get_drvdata (dev); -struct cd01_list *tmp_list; +struct cd_list *tmp_list;int ret; ret =component_bind_all (dev, &tmp_list);
@@ -657,7 +660,7 @@ static struct wmi_driver lwmi_other_driver = {module_wmi_driver (lwmi_other_driver); -MODULE_IMPORT_NS ("LENOVO_WMI_CD01" ); +MODULE_IMPORT_NS ("LENOVO_WMI_CD" );MODULE_IMPORT_NS ("LENOVO_WMI_HELPERS" );MODULE_DEVICE_TABLE (wmi, lwmi_other_id_table);MODULE_AUTHOR ("Derek J. Clark <[email protected]>" );
Signature · 1 line
2.51.0
PATCH v6 3/7 platform/x86: lenovo-wmi-{capdata,other}: Support multiple Capability Data
In reply to Rong ZhangThe current implementation are heavily bound to capdata01. Rewrite it so that it is suitable to utilize other Capability Data as well.
No functional change intended.
---
Changes in v6:
- Fix the error path of lwmi_cd_match_add_all()
- IS_ERR(matchptr) => IS_ERR(*matchptr)
Changes in v5:
- Do not cast pointer to non-pointer or vice versa (thanks kernel test robot)
Changes in v4:
- Get rid of wmi_has_guid() (thanks Armin Wolf)
- More changes in [PATCH v4 6/7]
- Prepare for [PATCH v4 6/7]
- Move lwmi_cd_match*() forward
- Use switch-case in lwmi_cd_remove()
Changes in v2:
- Fix function parameter 'type' not described in 'lwmi_cd_match' (thanks kernel test bot)
--- drivers/platform/x86/lenovo/wmi-capdata.c | 225 +++++++++++++++++----- drivers/platform/x86/lenovo/wmi-capdata.h | 7 +- drivers/platform/x86/lenovo/wmi-other.c | 16 +- 3 files changed, 189 insertions(+), 59 deletions(-)
drivers/platform/x86/lenovo/wmi-capdata.c +172 -53
@@ -12,8 +12,13 @@* * Copyright (C) 2025 Derek J. Clark <[email protected]> * - Initial implementation (formerly named lenovo-wmi-capdata01) +* +* Copyright (C) 2025 Rong Zhang <[email protected]> +* - Unified implementation */ +#define pr_fmt (fmt) KBUILD_MODNAME ": " fmt +#include <linux/acpi.h> #include <linux/cleanup.h> #include <linux/component.h>
@@ -36,6 +41,23 @@#define ACPI_AC_CLASS "ac_adapter"#define ACPI_AC_NOTIFY_STATUS 0x80 +enum lwmi_cd_type { +LENOVO_CAPABILITY_DATA_01 , +}; + +#define LWMI_CD_TABLE_ITEM (_type) \ + [_type] = { \ + .name = #_type, \ + .type = _type, \ + } + +static const struct lwmi_cd_info { +const char *name; +enum lwmi_cd_type type; +} lwmi_cd_table[] = { +LWMI_CD_TABLE_ITEM (LENOVO_CAPABILITY_DATA_01 ), +}; +struct lwmi_cd_priv {struct notifier_block acpi_nb;/* ACPI events */ struct wmi_device *wdev;
@@ -44,15 +66,63 @@ struct lwmi_cd_priv {struct cd_list {struct mutex list_mutex;/* list R/W mutex */ +enum lwmi_cd_type type;u8 count; -struct capdata01 data[]; + +union { + DECLARE_FLEX_ARRAY(struct capdata01, cd01); + }; }; +static struct wmi_driver lwmi_cd_driver; + +/** +* lwmi_cd_match() - Match rule for the master driver. +* @dev: Pointer to the capability data parent device. +* @type: Pointer to capability data type (enum lwmi_cd_type *) to match. +* +* Return: int. +*/ +static int lwmi_cd_match (struct device *dev,void *type) +{ +struct lwmi_cd_priv *priv; + +if (dev->driver != &lwmi_cd_driver.driver) +return false; + + priv =dev_get_drvdata (dev); +return priv->list->type == *(enum lwmi_cd_type *)type; +} + +/** +* lwmi_cd_match_add_all() - Add all match rule for the master driver. +* @master: Pointer to the master device. +* @matchptr: Pointer to the returned component_match pointer. +* +* Adds all component matches to the list stored in @matchptr for the @master +* device. @matchptr must be initialized to NULL. +*/ +void lwmi_cd_match_add_all (struct device *master,struct component_match **matchptr) +{ +int i; + +if (WARN_ON (*matchptr)) +return ; + +for (i =0 ; i <ARRAY_SIZE (lwmi_cd_table); i++) { +component_match_add (master, matchptr, lwmi_cd_match, + (void *)&lwmi_cd_table[i].type); +if (IS_ERR (*matchptr)) +return ; + } +} +EXPORT_SYMBOL_NS_GPL (lwmi_cd_match_add_all,"LENOVO_WMI_CD" ); +/** * lwmi_cd_component_bind() - Bind component to master device. * @cd_dev: Pointer to the lenovo-wmi-capdata driver parent device. * @om_dev: Pointer to the lenovo-wmi-other driver parent device. -* @data: cd_list object pointer used to return the capability data. +* @data: lwmi_cd_binder object pointer used to return the capability data. * * On lenovo-wmi-other's master bind, provide a pointer to the local capdata * list. This is used to call lwmi_cd*_get_data to look up attribute data
@@ -64,9 +134,15 @@ static int lwmi_cd_component_bind(struct device *cd_dev, struct device *om_dev, void *data) { struct lwmi_cd_priv *priv = dev_get_drvdata(cd_dev); -struct cd_list **cd_list = data; +struct lwmi_cd_binder *binder = data; - *cd_list = priv->list; +switch (priv->list->type) { +case LENOVO_CAPABILITY_DATA_01 : + binder->cd01_list = priv->list; +break ; +default : +return -EINVAL ; + }return 0 ; }
@@ -76,30 +152,33 @@ static const struct component_ops lwmi_cd_component_ops = { };/** -* lwmi_cd01_get_data - Get the data of the specified attribute +* lwmi_cd*_get_data - Get the data of the specified attribute * @list: The lenovo-wmi-capdata pointer to its cd_list struct. * @attribute_id: The capdata attribute ID to be found. -* @output: Pointer to a capdata01 struct to return the data. +* @output: Pointer to a capdata* struct to return the data. * -* Retrieves the capability data 01 struct pointer for the given -* attribute for its specified thermal mode. +* Retrieves the capability data struct pointer for the given +* attribute. * * Return: 0 on success, or -EINVAL. */ -int lwmi_cd01_get_data (struct cd_list *list,u32 attribute_id,struct capdata01 *output) -{ -u8 idx; - -guard (mutex)(&list->list_mutex); -for (idx =0 ; idx < list->count; idx++) { -if (list->data[idx].id != attribute_id) -continue ; -memcpy (output, &list->data[idx],sizeof (list->data[idx])); -return 0 ; +#define DEF_LWMI_CDXX_GET_DATA (_cdxx, _cd_type, _output_t) \ + int lwmi_##_cdxx##_get_data(struct cd_list *list, u32 attribute_id, _output_t *output) \ + { \ + u8 idx; \ + if (WARN_ON(list->type != _cd_type)) \ + return -EINVAL; \ + guard(mutex)(&list->list_mutex); \ + for (idx = 0; idx < list->count; idx++) { \ + if (list->_cdxx[idx].id != attribute_id) \ + continue; \ + memcpy(output, &list->_cdxx[idx], sizeof(list->_cdxx[idx])); \ + return 0; \ + } \ + return -EINVAL; \ } -return -EINVAL ; -} +DEF_LWMI_CDXX_GET_DATA(cd01, LENOVO_CAPABILITY_DATA_01, struct capdata01);EXPORT_SYMBOL_NS_GPL (lwmi_cd01_get_data,"LENOVO_WMI_CD" );/**
@@ -112,10 +191,21 @@ EXPORT_SYMBOL_NS_GPL(lwmi_cd01_get_data, "LENOVO_WMI_CD");*/ static int lwmi_cd_cache (struct lwmi_cd_priv *priv) { +size_t size;int idx; +void *p; + +switch (priv->list->type) { +case LENOVO_CAPABILITY_DATA_01 : + p = &priv->list->cd01[0 ]; + size =sizeof (priv->list->cd01[0 ]); +break ; +default : +return -EINVAL ; + }guard (mutex)(&priv->list->list_mutex); -for (idx =0 ; idx < priv->list->count; idx++) { +for (idx =0 ; idx < priv->list->count; idx++, p += size) { union acpi_object *ret_obj __free(kfree) = NULL; ret_obj =wmidev_block_query (priv->wdev, idx);
@@ -123,11 +213,10 @@ static int lwmi_cd_cache(struct lwmi_cd_priv *priv)return -ENODEV ;if (ret_obj->type !=ACPI_TYPE_BUFFER || - ret_obj->buffer.length <sizeof (priv->list->data[idx])) + ret_obj->buffer.length < size)continue ; -memcpy (&priv->list->data[idx], ret_obj->buffer.pointer, - ret_obj->buffer.length); +memcpy (p, ret_obj->buffer.pointer, size); }return 0 ;
@@ -136,20 +225,28 @@ static int lwmi_cd_cache(struct lwmi_cd_priv *priv)/** * lwmi_cd_alloc() - Allocate a cd_list struct in drvdata * @priv: lenovo-wmi-capdata driver data. +* @type: The type of capability data. * * Allocate a cd_list struct large enough to contain data from all WMI data * blocks provided by the interface. * * Return: 0 on success, or an error. */ -static int lwmi_cd_alloc (struct lwmi_cd_priv *priv) +static int lwmi_cd_alloc (struct lwmi_cd_priv *priv,enum lwmi_cd_type type) {struct cd_list *list;size_t list_size;int count, ret; count =wmidev_instance_count (priv->wdev); - list_size =struct_size (list, data, count); + +switch (type) { +case LENOVO_CAPABILITY_DATA_01 : + list_size =struct_size (list, cd01, count); +break ; +default : +return -EINVAL ; + } list =devm_kzalloc (&priv->wdev->dev, list_size,GFP_KERNEL );if (!list)
@@ -159,6 +256,7 @@ static int lwmi_cd_alloc(struct lwmi_cd_priv *priv)if (ret)return ret; + list->type = type; list->count = count; priv->list = list;
@@ -168,6 +266,7 @@ static int lwmi_cd_alloc(struct lwmi_cd_priv *priv)/** * lwmi_cd_setup() - Cache all WMI data block information * @priv: lenovo-wmi-capdata driver data. +* @type: The type of capability data. * * Allocate a cd_list struct large enough to contain data from all WMI data * blocks provided by the interface. Then loop through each data block and
@@ -175,11 +274,11 @@ static int lwmi_cd_alloc(struct lwmi_cd_priv *priv)* * Return: 0 on success, or an error code. */ -static int lwmi_cd_setup (struct lwmi_cd_priv *priv) +static int lwmi_cd_setup (struct lwmi_cd_priv *priv,enum lwmi_cd_type type) {int ret; - ret =lwmi_cd_alloc (priv); + ret =lwmi_cd_alloc (priv, type);if (ret)return ret;
@@ -235,9 +334,13 @@ static void lwmi_cd01_unregister(void *data)static int lwmi_cd_probe (struct wmi_device *wdev,const void *context) { +const struct lwmi_cd_info *info = context;struct lwmi_cd_priv *priv;int ret; +if (!info) +return -EINVAL ; + priv =devm_kzalloc (&wdev->dev,sizeof (*priv),GFP_KERNEL );if (!priv)return -ENOMEM ;
@@ -245,30 +348,58 @@ static int lwmi_cd_probe(struct wmi_device *wdev, const void *context) priv->wdev = wdev;dev_set_drvdata (&wdev->dev, priv); - ret =lwmi_cd_setup (priv); + ret =lwmi_cd_setup (priv, info->type);if (ret) -return ret; + goto out; - priv->acpi_nb.notifier_call = lwmi_cd01_notifier_call; +switch (info->type) { +case LENOVO_CAPABILITY_DATA_01 : + priv->acpi_nb.notifier_call = lwmi_cd01_notifier_call; - ret =register_acpi_notifier (&priv->acpi_nb); -if (ret) -return ret; + ret =register_acpi_notifier (&priv->acpi_nb); +if (ret) + goto out; - ret =devm_add_action_or_reset (&wdev->dev, lwmi_cd01_unregister, &priv->acpi_nb); -if (ret) -return ret; + ret =devm_add_action_or_reset (&wdev->dev, lwmi_cd01_unregister, + &priv->acpi_nb); +if (ret) + goto out; -return component_add (&wdev->dev, &lwmi_cd_component_ops); + ret =component_add (&wdev->dev, &lwmi_cd_component_ops); + goto out; +default : +return -EINVAL ; + } +out: +if (ret) { +dev_err (&wdev->dev,"failed to register %s: %d\n" , + info->name, ret); + }else { +dev_info (&wdev->dev,"registered %s with %u items\n" , + info->name, priv->list->count); + } +return ret; }static void lwmi_cd_remove (struct wmi_device *wdev) { -component_del (&wdev->dev, &lwmi_cd_component_ops); +struct lwmi_cd_priv *priv =dev_get_drvdata (&wdev->dev); + +switch (priv->list->type) { +case LENOVO_CAPABILITY_DATA_01 : +component_del (&wdev->dev, &lwmi_cd_component_ops); +break ; +default : +WARN_ON (1 ); + } } +#define LWMI_CD_WDEV_ID (_type) \ + .guid_string = _type##_GUID, \ + .context = &lwmi_cd_table[_type] +static const struct wmi_device_id lwmi_cd_id_table[] = { - {LENOVO_CAPABILITY_DATA_01_GUID ,NULL }, + {LWMI_CD_WDEV_ID (LENOVO_CAPABILITY_DATA_01 ) }, {} };
@@ -283,22 +414,10 @@ static struct wmi_driver lwmi_cd_driver = { .no_singleton = true, }; -/** -* lwmi_cd01_match() - Match rule for the master driver. -* @dev: Pointer to the capability data 01 parent device. -* @data: Unused void pointer for passing match criteria. -* -* Return: int. -*/ -int lwmi_cd01_match (struct device *dev,void *data) -{ -return dev->driver == &lwmi_cd_driver.driver; -} -EXPORT_SYMBOL_NS_GPL (lwmi_cd01_match,"LENOVO_WMI_CD" ); -module_wmi_driver (lwmi_cd_driver);MODULE_DEVICE_TABLE (wmi, lwmi_cd_id_table);MODULE_AUTHOR ("Derek J. Clark <[email protected]>" ); +MODULE_AUTHOR ("Rong Zhang <[email protected]>" );MODULE_DESCRIPTION ("Lenovo Capability Data WMI Driver" );MODULE_LICENSE ("GPL" );
drivers/platform/x86/lenovo/wmi-capdata.h +6 -1
@@ -7,6 +7,7 @@#include <linux/types.h> +struct component_match ;struct device ;struct cd_list ;
@@ -19,7 +20,11 @@ struct capdata01 { u32 max_value; }; +struct lwmi_cd_binder { +struct cd_list *cd01_list; +}; + +void lwmi_cd_match_add_all (struct device *master,struct component_match **matchptr);int lwmi_cd01_get_data (struct cd_list *list,u32 attribute_id,struct capdata01 *output); -int lwmi_cd01_match (struct device *dev,void *data);#endif /* !_LENOVO_WMI_CAPDATA_H_ */
drivers/platform/x86/lenovo/wmi-other.c +11 -5
@@ -579,14 +579,14 @@ static void lwmi_om_fw_attr_remove(struct lwmi_om_priv *priv)static int lwmi_om_master_bind (struct device *dev) {struct lwmi_om_priv *priv =dev_get_drvdata (dev); -struct cd_list *tmp_list; +struct lwmi_cd_binder binder = {0 };int ret; - ret =component_bind_all (dev, &tmp_list); + ret =component_bind_all (dev, &binder);if (ret)return ret; - priv->cd01_list = tmp_list; + priv->cd01_list = binder.cd01_list;if (!priv->cd01_list)return -ENODEV ;
@@ -623,10 +623,13 @@ static int lwmi_other_probe(struct wmi_device *wdev, const void *context)if (!priv)return -ENOMEM ; +/* Sentinel for on-demand ida_free(). */ + priv->ida_id = -EIDRM ; + priv->wdev = wdev;dev_set_drvdata (&wdev->dev, priv); -component_match_add (&wdev->dev, &master_match, lwmi_cd01_match,NULL ); +lwmi_cd_match_add_all (&wdev->dev, &master_match);if (IS_ERR (master_match))return PTR_ERR (master_match);
@@ -639,7 +642,10 @@ static void lwmi_other_remove(struct wmi_device *wdev)struct lwmi_om_priv *priv =dev_get_drvdata (&wdev->dev);component_master_del (&wdev->dev, &lwmi_om_master_ops); -ida_free (&lwmi_om_ida, priv->ida_id); + +/* No IDA to free if the driver is never bound to its components. */ +if (priv->ida_id >=0 ) +ida_free (&lwmi_om_ida, priv->ida_id); }static const struct wmi_device_id lwmi_other_id_table[] = {
Signature · 1 line
2.51.0
Ilpo Järvinen
maintainerRe: [PATCH v6 3/7] platform/x86: lenovo-wmi-{capdata,other}: Support multiple Capability Data
Quoted 76 lines · Rong Zhang
The current implementation are heavily bound to capdata01. Rewrite it so that it is suitable to utilize other Capability Data as well.
No functional change intended.
Signed-off-by Rong Zhang <[email protected]>Reviewed-by Derek J. Clark <[email protected]>Tested-by Derek J. Clark <[email protected]>---
Changes in v6:
- Fix the error path oflwmi_cd_match_add_all()
-IS_ERR(matchptr)=>IS_ERR(*matchptr)Changes in v5:
- Do not cast pointer to non-pointer or vice versa (thanks kernel test robot)Changes in v4:
- Get rid ofwmi_has_guid()(thanks Armin Wolf)
- More changes in [PATCH v4 6/7]
- Prepare for [PATCH v4 6/7]
- Move lwmi_cd_match*() forward
- Use switch-case inlwmi_cd_remove()Changes in v2:
- Fix function parameter 'type' not described in 'lwmi_cd_match' (thanks kernel test bot)--- drivers/platform/x86/lenovo/wmi-capdata.c | 225 +++++++++++++++++----- drivers/platform/x86/lenovo/wmi-capdata.h | 7 +- drivers/platform/x86/lenovo/wmi-other.c | 16 +- 3 files changed, 189 insertions(+), 59 deletions(-)drivers/platform/x86/lenovo/wmi-capdata.c +22
-0@@ -12,8 +12,13 @@* * Copyright (C) 2025 Derek J. Clark <[email protected]> * - Initial implementation (formerly named lenovo-wmi-capdata01) +* +* Copyright (C) 2025 Rong Zhang <[email protected]> +* - Unified implementation */ +#define pr_fmt (fmt) KBUILD_MODNAME ": " fmt +#include <linux/acpi.h> #include <linux/cleanup.h> #include <linux/component.h> @@ -36,6 +41,23 @@#define ACPI_AC_CLASS "ac_adapter"#define ACPI_AC_NOTIFY_STATUS 0x80 +enum lwmi_cd_type { +LENOVO_CAPABILITY_DATA_01 , +}; + +#define LWMI_CD_TABLE_ITEM (_type) \ + [_type] = { \ + .name = #_type, \ + .type = _type, \ + } + +static const struct lwmi_cd_info { +const char *name; +enum lwmi_cd_type type; +} lwmi_cd_table[] = { +LWMI_CD_TABLE_ITEM (LENOVO_CAPABILITY_DATA_01 ), +}; +struct lwmi_cd_priv {struct notifier_block acpi_nb;/* ACPI events */ struct wmi_device *wdev;
drivers/platform/x86/lenovo/wmi-capdata.c struct lwmi_cd_priv { · line 73
Quoted 9 lines
drivers/platform/x86/lenovo/wmi-capdata.c +4
-1@@ -44,15 +66,63 @@ struct lwmi_cd_priv {struct cd_list {struct mutex list_mutex;/* list R/W mutex */ +enum lwmi_cd_type type;u8 count; -struct capdata01 data[]; + +union { + DECLARE_FLEX_ARRAY(struct capdata01, cd01);
Add #include
Quoted 26 lines
drivers/platform/x86/lenovo/wmi-capdata.c +24
-0+ }; }; +static struct wmi_driver lwmi_cd_driver; + +/** +* lwmi_cd_match() - Match rule for the master driver. +* @dev: Pointer to the capability data parent device. +* @type: Pointer to capability data type (enum lwmi_cd_type *) to match. +* +* Return: int. +*/ +static int lwmi_cd_match (struct device *dev,void *type) +{ +struct lwmi_cd_priv *priv; + +if (dev->driver != &lwmi_cd_driver.driver) +return false; + + priv =dev_get_drvdata (dev); +return priv->list->type == *(enum lwmi_cd_type *)type; +} + +/** +* lwmi_cd_match_add_all() - Add all match rule for the master driver. +* @master: Pointer to the master device.
drivers/platform/x86/lenovo/wmi-capdata.c struct lwmi_cd_priv { · line 109
Quoted 10 lines
drivers/platform/x86/lenovo/wmi-capdata.c +10
-0+* @matchptr: Pointer to the returned component_match pointer. +* +* Adds all component matches to the list stored in @matchptr for the @master +* device. @matchptr must be initialized to NULL. +*/ +void lwmi_cd_match_add_all (struct device *master,struct component_match **matchptr) +{ +int i; + +if (WARN_ON (*matchptr))
Add #include
drivers/platform/x86/lenovo/wmi-capdata.c struct lwmi_cd_priv { · line 114
Quoted 5 lines
drivers/platform/x86/lenovo/wmi-capdata.c +5
-0+return ; + +for (i =0 ; i <ARRAY_SIZE (lwmi_cd_table); i++) { +component_match_add (master, matchptr, lwmi_cd_match, + (void *)&lwmi_cd_table[i].type);
As the cast to void pointer necessary here? Usually pointer can be cast to void * implicitly (but I'm not sure about this case type seems enum).
drivers/platform/x86/lenovo/wmi-capdata.c struct lwmi_cd_priv { · line 115
Quoted 1 line
drivers/platform/x86/lenovo/wmi-capdata.c +1
-0+if (IS_ERR (*matchptr))
Add #include
Quoted 54 lines
drivers/platform/x86/lenovo/wmi-capdata.c +18
-11+return ; + } +} +EXPORT_SYMBOL_NS_GPL (lwmi_cd_match_add_all,"LENOVO_WMI_CD" ); +/** * lwmi_cd_component_bind() - Bind component to master device. * @cd_dev: Pointer to the lenovo-wmi-capdata driver parent device. * @om_dev: Pointer to the lenovo-wmi-other driver parent device. -* @data: cd_list object pointer used to return the capability data. +* @data: lwmi_cd_binder object pointer used to return the capability data. * * On lenovo-wmi-other's master bind, provide a pointer to the local capdata * list. This is used to call lwmi_cd*_get_data to look up attribute data @@ -64,9 +134,15 @@ static int lwmi_cd_component_bind(struct device *cd_dev, struct device *om_dev, void *data) { struct lwmi_cd_priv *priv = dev_get_drvdata(cd_dev); -struct cd_list **cd_list = data; +struct lwmi_cd_binder *binder = data; - *cd_list = priv->list; +switch (priv->list->type) { +case LENOVO_CAPABILITY_DATA_01 : + binder->cd01_list = priv->list; +break ; +default : +return -EINVAL ; + }return 0 ; }@@ -76,30 +152,33 @@ static const struct component_ops lwmi_cd_component_ops = { };/** -* lwmi_cd01_get_data - Get the data of the specified attribute +* lwmi_cd*_get_data - Get the data of the specified attribute * @list: The lenovo-wmi-capdata pointer to its cd_list struct. * @attribute_id: The capdata attribute ID to be found. -* @output: Pointer to a capdata01 struct to return the data. +* @output: Pointer to a capdata* struct to return the data. * -* Retrieves the capability data 01 struct pointer for the given -* attribute for its specified thermal mode. +* Retrieves the capability data struct pointer for the given +* attribute. * * Return: 0 on success, or -EINVAL. */ -int lwmi_cd01_get_data (struct cd_list *list,u32 attribute_id,struct capdata01 *output) -{ -u8 idx; -
drivers/platform/x86/lenovo/wmi-capdata.c static const struct component_ops lwmi_cd_component_ops = { · line 168
Quoted 10 lines
drivers/platform/x86/lenovo/wmi-capdata.c +4
-6-guard (mutex)(&list->list_mutex); -for (idx =0 ; idx < list->count; idx++) { -if (list->data[idx].id != attribute_id) -continue ; -memcpy (output, &list->data[idx],sizeof (list->data[idx])); -return 0 ; +#define DEF_LWMI_CDXX_GET_DATA (_cdxx, _cd_type, _output_t) \ + int lwmi_##_cdxx##_get_data(struct cd_list *list, u32 attribute_id, _output_t *output) \ + { \ + u8 idx; \
Please follow the normal conversions, so add an empty line here (with the backslash contination, obviusly).
drivers/platform/x86/lenovo/wmi-capdata.c static const struct component_ops lwmi_cd_component_ops = { · line 170
Quoted 2 lines
drivers/platform/x86/lenovo/wmi-capdata.c +2
-0+if (WARN_ON (list->type != _cd_type)) \ +return -EINVAL ; \
Empty line here too to help readability?
Quoted 157 lines
drivers/platform/x86/lenovo/wmi-capdata.c +53
-19+guard (mutex)(&list->list_mutex); \ +for (idx =0 ; idx < list->count; idx++) { \ +if (list->_cdxx[idx].id != attribute_id) \ +continue ; \ +memcpy (output, &list->_cdxx[idx],sizeof (list->_cdxx[idx])); \ +return 0 ; \ + } \ +return -EINVAL ; \ } -return -EINVAL ; -} +DEF_LWMI_CDXX_GET_DATA(cd01, LENOVO_CAPABILITY_DATA_01, struct capdata01);EXPORT_SYMBOL_NS_GPL (lwmi_cd01_get_data,"LENOVO_WMI_CD" );/** @@ -112,10 +191,21 @@ EXPORT_SYMBOL_NS_GPL(lwmi_cd01_get_data, "LENOVO_WMI_CD");*/ static int lwmi_cd_cache (struct lwmi_cd_priv *priv) { +size_t size;int idx; +void *p; + +switch (priv->list->type) { +case LENOVO_CAPABILITY_DATA_01 : + p = &priv->list->cd01[0 ]; + size =sizeof (priv->list->cd01[0 ]); +break ; +default : +return -EINVAL ; + }guard (mutex)(&priv->list->list_mutex); -for (idx =0 ; idx < priv->list->count; idx++) { +for (idx =0 ; idx < priv->list->count; idx++, p += size) { union acpi_object *ret_obj __free(kfree) = NULL; ret_obj =wmidev_block_query (priv->wdev, idx);@@ -123,11 +213,10 @@ static int lwmi_cd_cache(struct lwmi_cd_priv *priv)return -ENODEV ;if (ret_obj->type !=ACPI_TYPE_BUFFER || - ret_obj->buffer.length <sizeof (priv->list->data[idx])) + ret_obj->buffer.length < size)continue ; -memcpy (&priv->list->data[idx], ret_obj->buffer.pointer, - ret_obj->buffer.length); +memcpy (p, ret_obj->buffer.pointer, size); }return 0 ;@@ -136,20 +225,28 @@ static int lwmi_cd_cache(struct lwmi_cd_priv *priv)/** * lwmi_cd_alloc() - Allocate a cd_list struct in drvdata * @priv: lenovo-wmi-capdata driver data. +* @type: The type of capability data. * * Allocate a cd_list struct large enough to contain data from all WMI data * blocks provided by the interface. * * Return: 0 on success, or an error. */ -static int lwmi_cd_alloc (struct lwmi_cd_priv *priv) +static int lwmi_cd_alloc (struct lwmi_cd_priv *priv,enum lwmi_cd_type type) {struct cd_list *list;size_t list_size;int count, ret; count =wmidev_instance_count (priv->wdev); - list_size =struct_size (list, data, count); + +switch (type) { +case LENOVO_CAPABILITY_DATA_01 : + list_size =struct_size (list, cd01, count); +break ; +default : +return -EINVAL ; + } list =devm_kzalloc (&priv->wdev->dev, list_size,GFP_KERNEL );if (!list)@@ -159,6 +256,7 @@ static int lwmi_cd_alloc(struct lwmi_cd_priv *priv)if (ret)return ret; + list->type = type; list->count = count; priv->list = list;@@ -168,6 +266,7 @@ static int lwmi_cd_alloc(struct lwmi_cd_priv *priv)/** * lwmi_cd_setup() - Cache all WMI data block information * @priv: lenovo-wmi-capdata driver data. +* @type: The type of capability data. * * Allocate a cd_list struct large enough to contain data from all WMI data * blocks provided by the interface. Then loop through each data block and @@ -175,11 +274,11 @@ static int lwmi_cd_alloc(struct lwmi_cd_priv *priv)* * Return: 0 on success, or an error code. */ -static int lwmi_cd_setup (struct lwmi_cd_priv *priv) +static int lwmi_cd_setup (struct lwmi_cd_priv *priv,enum lwmi_cd_type type) {int ret; - ret =lwmi_cd_alloc (priv); + ret =lwmi_cd_alloc (priv, type);if (ret)return ret;@@ -235,9 +334,13 @@ static void lwmi_cd01_unregister(void *data)static int lwmi_cd_probe (struct wmi_device *wdev,const void *context) { +const struct lwmi_cd_info *info = context;struct lwmi_cd_priv *priv;int ret; +if (!info) +return -EINVAL ; + priv =devm_kzalloc (&wdev->dev,sizeof (*priv),GFP_KERNEL );if (!priv)return -ENOMEM ;@@ -245,30 +348,58 @@ static int lwmi_cd_probe(struct wmi_device *wdev, const void *context) priv->wdev = wdev;dev_set_drvdata (&wdev->dev, priv); - ret =lwmi_cd_setup (priv); + ret =lwmi_cd_setup (priv, info->type);if (ret) -return ret; + goto out; - priv->acpi_nb.notifier_call = lwmi_cd01_notifier_call; +switch (info->type) { +case LENOVO_CAPABILITY_DATA_01 : + priv->acpi_nb.notifier_call = lwmi_cd01_notifier_call; - ret =register_acpi_notifier (&priv->acpi_nb); -if (ret) -return ret; + ret =register_acpi_notifier (&priv->acpi_nb); +if (ret) + goto out; - ret =devm_add_action_or_reset (&wdev->dev, lwmi_cd01_unregister, &priv->acpi_nb); -if (ret) -return ret; + ret =devm_add_action_or_reset (&wdev->dev, lwmi_cd01_unregister, + &priv->acpi_nb); +if (ret) + goto out;
drivers/platform/x86/lenovo/wmi-capdata.c static int lwmi_cd_probe(struct wmi_device *wdev, const void *context) · line 375
Quoted 10 lines
drivers/platform/x86/lenovo/wmi-capdata.c +8
-1-return component_add (&wdev->dev, &lwmi_cd_component_ops); + ret =component_add (&wdev->dev, &lwmi_cd_component_ops); + goto out; +default : +return -EINVAL ; + } +out: +if (ret) { + dev_err(&wdev->dev, "failed to register %s: %d\n",
Include?
drivers/platform/x86/lenovo/wmi-capdata.c static int lwmi_cd_probe(struct wmi_device *wdev, const void *context) · line 379
Quoted 4 lines
drivers/platform/x86/lenovo/wmi-capdata.c +4
-0+ info->name, ret); + }else { +dev_info (&wdev->dev,"registered %s with %u items\n" , + info->name, priv->list->count);
Success path should be quiet.
Quoted 11 lines
drivers/platform/x86/lenovo/wmi-capdata.c +6
-1+ } +return ret; }static void lwmi_cd_remove (struct wmi_device *wdev) { -component_del (&wdev->dev, &lwmi_cd_component_ops); +struct lwmi_cd_priv *priv =dev_get_drvdata (&wdev->dev); + +switch (priv->list->type) { +case LENOVO_CAPABILITY_DATA_01 :
drivers/platform/x86/lenovo/wmi-capdata.c static int lwmi_cd_probe(struct wmi_device *wdev, const void *context) · line 399
Quoted 10 lines
drivers/platform/x86/lenovo/wmi-capdata.c +8
-0+component_del (&wdev->dev, &lwmi_cd_component_ops); +break ; +default : +WARN_ON (1 ); + } } +#define LWMI_CD_WDEV_ID (_type) \ + .guid_string = _type##_GUID, \ + .context = &lwmi_cd_table[_type]
Add comma.
Quoted 61 lines
drivers/platform/x86/lenovo/wmi-capdata.c +3
-14+static const struct wmi_device_id lwmi_cd_id_table[] = { - {LENOVO_CAPABILITY_DATA_01_GUID ,NULL }, + {LWMI_CD_WDEV_ID (LENOVO_CAPABILITY_DATA_01 ) }, {} };@@ -283,22 +414,10 @@ static struct wmi_driver lwmi_cd_driver = { .no_singleton = true, }; -/** -* lwmi_cd01_match() - Match rule for the master driver. -* @dev: Pointer to the capability data 01 parent device. -* @data: Unused void pointer for passing match criteria. -* -* Return: int. -*/ -int lwmi_cd01_match (struct device *dev,void *data) -{ -return dev->driver == &lwmi_cd_driver.driver; -} -EXPORT_SYMBOL_NS_GPL (lwmi_cd01_match,"LENOVO_WMI_CD" ); -module_wmi_driver (lwmi_cd_driver);MODULE_DEVICE_TABLE (wmi, lwmi_cd_id_table);MODULE_AUTHOR ("Derek J. Clark <[email protected]>" ); +MODULE_AUTHOR ("Rong Zhang <[email protected]>" );MODULE_DESCRIPTION ("Lenovo Capability Data WMI Driver" );MODULE_LICENSE ("GPL" );drivers/platform/x86/lenovo/wmi-capdata.h +6
-1@@ -7,6 +7,7 @@#include <linux/types.h> +struct component_match ;struct device ;struct cd_list ;@@ -19,7 +20,11 @@ struct capdata01 { u32 max_value; }; +struct lwmi_cd_binder { +struct cd_list *cd01_list; +}; + +void lwmi_cd_match_add_all (struct device *master,struct component_match **matchptr);int lwmi_cd01_get_data (struct cd_list *list,u32 attribute_id,struct capdata01 *output); -int lwmi_cd01_match (struct device *dev,void *data);#endif /* !_LENOVO_WMI_CAPDATA_H_ */ drivers/platform/x86/lenovo/wmi-other.c +0
-0
drivers/platform/x86/lenovo/wmi-other.c static void lwmi_om_fw_attr_remove(struct lwmi_om_priv *priv) · line 582
Quoted 5 lines
drivers/platform/x86/lenovo/wmi-other.c +1
-1@@ -579,14 +579,14 @@ static void lwmi_om_fw_attr_remove(struct lwmi_om_priv *priv)static int lwmi_om_master_bind (struct device *dev) {struct lwmi_om_priv *priv =dev_get_drvdata (dev); -struct cd_list *tmp_list; +struct lwmi_cd_binder binder = {0 };
= {} is enough to initialize to default values.
Quoted 40 lines
drivers/platform/x86/lenovo/wmi-other.c +10
-4int ret; - ret =component_bind_all (dev, &tmp_list); + ret =component_bind_all (dev, &binder);if (ret)return ret; - priv->cd01_list = tmp_list; + priv->cd01_list = binder.cd01_list;if (!priv->cd01_list)return -ENODEV ;@@ -623,10 +623,13 @@ static int lwmi_other_probe(struct wmi_device *wdev, const void *context)if (!priv)return -ENOMEM ; +/* Sentinel for on-demand ida_free(). */ + priv->ida_id = -EIDRM ; + priv->wdev = wdev;dev_set_drvdata (&wdev->dev, priv); -component_match_add (&wdev->dev, &master_match, lwmi_cd01_match,NULL ); +lwmi_cd_match_add_all (&wdev->dev, &master_match);if (IS_ERR (master_match))return PTR_ERR (master_match);@@ -639,7 +642,10 @@ static void lwmi_other_remove(struct wmi_device *wdev)struct lwmi_om_priv *priv =dev_get_drvdata (&wdev->dev);component_master_del (&wdev->dev, &lwmi_om_master_ops); -ida_free (&lwmi_om_ida, priv->ida_id); + +/* No IDA to free if the driver is never bound to its components. */ +if (priv->ida_id >=0 ) +ida_free (&lwmi_om_ida, priv->ida_id); }static const struct wmi_device_id lwmi_other_id_table[] = {
Signature · 1 line
i.
Re: [PATCH v6 3/7] platform/x86: lenovo-wmi-{capdata,other}: Support multiple Capability Data
Hi Ilpo,
Thanks for your review.
Quoted 79 lines · Ilpo Järvinen
Quoted 77 lines · Rong Zhang
The current implementation are heavily bound to capdata01. Rewrite it so that it is suitable to utilize other Capability Data as well.
No functional change intended.
Signed-off-by Rong Zhang <[email protected]>Reviewed-by Derek J. Clark <[email protected]>Tested-by Derek J. Clark <[email protected]>---
Changes in v6:
- Fix the error path oflwmi_cd_match_add_all()
-IS_ERR(matchptr)=>IS_ERR(*matchptr)Changes in v5:
- Do not cast pointer to non-pointer or vice versa (thanks kernel test robot)Changes in v4:
- Get rid ofwmi_has_guid()(thanks Armin Wolf)
- More changes in [PATCH v4 6/7]
- Prepare for [PATCH v4 6/7]
- Move lwmi_cd_match*() forward
- Use switch-case inlwmi_cd_remove()Changes in v2:
- Fix function parameter 'type' not described in 'lwmi_cd_match' (thanks kernel test bot)--- drivers/platform/x86/lenovo/wmi-capdata.c | 225 +++++++++++++++++----- drivers/platform/x86/lenovo/wmi-capdata.h | 7 +- drivers/platform/x86/lenovo/wmi-other.c | 16 +- 3 files changed, 189 insertions(+), 59 deletions(-)drivers/platform/x86/lenovo/wmi-capdata.c +22
-0@@ -12,8 +12,13 @@* * Copyright (C) 2025 Derek J. Clark <[email protected]> * - Initial implementation (formerly named lenovo-wmi-capdata01) +* +* Copyright (C) 2025 Rong Zhang <[email protected]> +* - Unified implementation */ +#define pr_fmt (fmt) KBUILD_MODNAME ": " fmt +#include <linux/acpi.h> #include <linux/cleanup.h> #include <linux/component.h> @@ -36,6 +41,23 @@#define ACPI_AC_CLASS "ac_adapter"#define ACPI_AC_NOTIFY_STATUS 0x80 +enum lwmi_cd_type { +LENOVO_CAPABILITY_DATA_01 , +}; + +#define LWMI_CD_TABLE_ITEM (_type) \ + [_type] = { \ + .name = #_type, \ + .type = _type, \ + } + +static const struct lwmi_cd_info { +const char *name; +enum lwmi_cd_type type; +} lwmi_cd_table[] = { +LWMI_CD_TABLE_ITEM (LENOVO_CAPABILITY_DATA_01 ), +}; +struct lwmi_cd_priv {struct notifier_block acpi_nb;/* ACPI events */ struct wmi_device *wdev;@@ -44,15 +66,63 @@ struct lwmi_cd_priv {
Quoted 10 lines
drivers/platform/x86/lenovo/wmi-capdata.c struct lwmi_cd_priv { · line 73
Quoted 8 lines
drivers/platform/x86/lenovo/wmi-capdata.c +4
-1struct cd_list {struct mutex list_mutex;/* list R/W mutex */ +enum lwmi_cd_type type;u8 count; -struct capdata01 data[]; + +union { + DECLARE_FLEX_ARRAY(struct capdata01, cd01);Add #include
It's embarrassing that I always forget #include... Sorry for that.
Will fix this and the following missing #include. Thanks.
Quoted 39 lines
Quoted 26 lines
drivers/platform/x86/lenovo/wmi-capdata.c +24
-0+ }; }; +static struct wmi_driver lwmi_cd_driver; + +/** +* lwmi_cd_match() - Match rule for the master driver. +* @dev: Pointer to the capability data parent device. +* @type: Pointer to capability data type (enum lwmi_cd_type *) to match. +* +* Return: int. +*/ +static int lwmi_cd_match (struct device *dev,void *type) +{ +struct lwmi_cd_priv *priv; + +if (dev->driver != &lwmi_cd_driver.driver) +return false; + + priv =dev_get_drvdata (dev); +return priv->list->type == *(enum lwmi_cd_type *)type; +} + +/** +* lwmi_cd_match_add_all() - Add all match rule for the master driver. +* @master: Pointer to the master device. drivers/platform/x86/lenovo/wmi-capdata.c struct lwmi_cd_priv { · line 109
Quoted 10 lines
drivers/platform/x86/lenovo/wmi-capdata.c +10
-0+* @matchptr: Pointer to the returned component_match pointer. +* +* Adds all component matches to the list stored in @matchptr for the @master +* device. @matchptr must be initialized to NULL. +*/ +void lwmi_cd_match_add_all (struct device *master,struct component_match **matchptr) +{ +int i; + +if (WARN_ON (*matchptr))Add #include
Quoted 8 lines
drivers/platform/x86/lenovo/wmi-capdata.c struct lwmi_cd_priv { · line 114
Quoted 5 lines
drivers/platform/x86/lenovo/wmi-capdata.c +5
-0+return ; + +for (i =0 ; i <ARRAY_SIZE (lwmi_cd_table); i++) { +component_match_add (master, matchptr, lwmi_cd_match, + (void *)&lwmi_cd_table[i].type);As the cast to void pointer necessary here? Usually pointer can be cast to void * implicitly (but I'm not sure about this case type seems enum).
lwmi_cd_table is a const array, its const qualifier infects the pointer. The cast here is to drop the const qualifier from const enum lwmi_cd_type *' as component_match_add() expects plain void *'.
warning: passing argument 4 of ‘component_match_add’ discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
note: expected ‘void *’ but argument is of type ‘const enum lwmi_cd_type *’
Quoted 63 lines
drivers/platform/x86/lenovo/wmi-capdata.c struct lwmi_cd_priv { · line 115
Quoted 1 line
drivers/platform/x86/lenovo/wmi-capdata.c +1
-0+if (IS_ERR (*matchptr))Add #include
Quoted 59 lines
drivers/platform/x86/lenovo/wmi-capdata.c +18
-16+return ; + } +} +EXPORT_SYMBOL_NS_GPL (lwmi_cd_match_add_all,"LENOVO_WMI_CD" ); +/** * lwmi_cd_component_bind() - Bind component to master device. * @cd_dev: Pointer to the lenovo-wmi-capdata driver parent device. * @om_dev: Pointer to the lenovo-wmi-other driver parent device. -* @data: cd_list object pointer used to return the capability data. +* @data: lwmi_cd_binder object pointer used to return the capability data. * * On lenovo-wmi-other's master bind, provide a pointer to the local capdata * list. This is used to call lwmi_cd*_get_data to look up attribute data @@ -64,9 +134,15 @@ static int lwmi_cd_component_bind(struct device *cd_dev, struct device *om_dev, void *data) { struct lwmi_cd_priv *priv = dev_get_drvdata(cd_dev); -struct cd_list **cd_list = data; +struct lwmi_cd_binder *binder = data; - *cd_list = priv->list; +switch (priv->list->type) { +case LENOVO_CAPABILITY_DATA_01 : + binder->cd01_list = priv->list; +break ; +default : +return -EINVAL ; + }return 0 ; }@@ -76,30 +152,33 @@ static const struct component_ops lwmi_cd_component_ops = { };/** -* lwmi_cd01_get_data - Get the data of the specified attribute +* lwmi_cd*_get_data - Get the data of the specified attribute * @list: The lenovo-wmi-capdata pointer to its cd_list struct. * @attribute_id: The capdata attribute ID to be found. -* @output: Pointer to a capdata01 struct to return the data. +* @output: Pointer to a capdata* struct to return the data. * -* Retrieves the capability data 01 struct pointer for the given -* attribute for its specified thermal mode. +* Retrieves the capability data struct pointer for the given +* attribute. * * Return: 0 on success, or -EINVAL. */ -int lwmi_cd01_get_data (struct cd_list *list,u32 attribute_id,struct capdata01 *output) -{ -u8 idx; - -guard (mutex)(&list->list_mutex); -for (idx =0 ; idx < list->count; idx++) { -if (list->data[idx].id != attribute_id) -continue ; -memcpy (output, &list->data[idx],sizeof (list->data[idx]));
Quoted 8 lines
drivers/platform/x86/lenovo/wmi-capdata.c static const struct component_ops lwmi_cd_component_ops = { · line 168
Quoted 5 lines
drivers/platform/x86/lenovo/wmi-capdata.c +4
-1-return 0 ; +#define DEF_LWMI_CDXX_GET_DATA (_cdxx, _cd_type, _output_t) \ + int lwmi_##_cdxx##_get_data(struct cd_list *list, u32 attribute_id, _output_t *output) \ + { \ + u8 idx; \Please follow the normal conversions, so add an empty line here (with the backslash contination, obviusly).
Will fix this and the following formatting issues (empty line, comma, {0} => {}). Thanks.
Quoted 175 lines
drivers/platform/x86/lenovo/wmi-capdata.c static const struct component_ops lwmi_cd_component_ops = { · line 170
Quoted 2 lines
drivers/platform/x86/lenovo/wmi-capdata.c +2
-0+if (WARN_ON (list->type != _cd_type)) \ +return -EINVAL ; \Empty line here too to help readability?
Quoted 157 lines
drivers/platform/x86/lenovo/wmi-capdata.c +53
-19+guard (mutex)(&list->list_mutex); \ +for (idx =0 ; idx < list->count; idx++) { \ +if (list->_cdxx[idx].id != attribute_id) \ +continue ; \ +memcpy (output, &list->_cdxx[idx],sizeof (list->_cdxx[idx])); \ +return 0 ; \ + } \ +return -EINVAL ; \ } -return -EINVAL ; -} +DEF_LWMI_CDXX_GET_DATA(cd01, LENOVO_CAPABILITY_DATA_01, struct capdata01);EXPORT_SYMBOL_NS_GPL (lwmi_cd01_get_data,"LENOVO_WMI_CD" );/** @@ -112,10 +191,21 @@ EXPORT_SYMBOL_NS_GPL(lwmi_cd01_get_data, "LENOVO_WMI_CD");*/ static int lwmi_cd_cache (struct lwmi_cd_priv *priv) { +size_t size;int idx; +void *p; + +switch (priv->list->type) { +case LENOVO_CAPABILITY_DATA_01 : + p = &priv->list->cd01[0 ]; + size =sizeof (priv->list->cd01[0 ]); +break ; +default : +return -EINVAL ; + }guard (mutex)(&priv->list->list_mutex); -for (idx =0 ; idx < priv->list->count; idx++) { +for (idx =0 ; idx < priv->list->count; idx++, p += size) { union acpi_object *ret_obj __free(kfree) = NULL; ret_obj =wmidev_block_query (priv->wdev, idx);@@ -123,11 +213,10 @@ static int lwmi_cd_cache(struct lwmi_cd_priv *priv)return -ENODEV ;if (ret_obj->type !=ACPI_TYPE_BUFFER || - ret_obj->buffer.length <sizeof (priv->list->data[idx])) + ret_obj->buffer.length < size)continue ; -memcpy (&priv->list->data[idx], ret_obj->buffer.pointer, - ret_obj->buffer.length); +memcpy (p, ret_obj->buffer.pointer, size); }return 0 ;@@ -136,20 +225,28 @@ static int lwmi_cd_cache(struct lwmi_cd_priv *priv)/** * lwmi_cd_alloc() - Allocate a cd_list struct in drvdata * @priv: lenovo-wmi-capdata driver data. +* @type: The type of capability data. * * Allocate a cd_list struct large enough to contain data from all WMI data * blocks provided by the interface. * * Return: 0 on success, or an error. */ -static int lwmi_cd_alloc (struct lwmi_cd_priv *priv) +static int lwmi_cd_alloc (struct lwmi_cd_priv *priv,enum lwmi_cd_type type) {struct cd_list *list;size_t list_size;int count, ret; count =wmidev_instance_count (priv->wdev); - list_size =struct_size (list, data, count); + +switch (type) { +case LENOVO_CAPABILITY_DATA_01 : + list_size =struct_size (list, cd01, count); +break ; +default : +return -EINVAL ; + } list =devm_kzalloc (&priv->wdev->dev, list_size,GFP_KERNEL );if (!list)@@ -159,6 +256,7 @@ static int lwmi_cd_alloc(struct lwmi_cd_priv *priv)if (ret)return ret; + list->type = type; list->count = count; priv->list = list;@@ -168,6 +266,7 @@ static int lwmi_cd_alloc(struct lwmi_cd_priv *priv)/** * lwmi_cd_setup() - Cache all WMI data block information * @priv: lenovo-wmi-capdata driver data. +* @type: The type of capability data. * * Allocate a cd_list struct large enough to contain data from all WMI data * blocks provided by the interface. Then loop through each data block and @@ -175,11 +274,11 @@ static int lwmi_cd_alloc(struct lwmi_cd_priv *priv)* * Return: 0 on success, or an error code. */ -static int lwmi_cd_setup (struct lwmi_cd_priv *priv) +static int lwmi_cd_setup (struct lwmi_cd_priv *priv,enum lwmi_cd_type type) {int ret; - ret =lwmi_cd_alloc (priv); + ret =lwmi_cd_alloc (priv, type);if (ret)return ret;@@ -235,9 +334,13 @@ static void lwmi_cd01_unregister(void *data)static int lwmi_cd_probe (struct wmi_device *wdev,const void *context) { +const struct lwmi_cd_info *info = context;struct lwmi_cd_priv *priv;int ret; +if (!info) +return -EINVAL ; + priv =devm_kzalloc (&wdev->dev,sizeof (*priv),GFP_KERNEL );if (!priv)return -ENOMEM ;@@ -245,30 +348,58 @@ static int lwmi_cd_probe(struct wmi_device *wdev, const void *context) priv->wdev = wdev;dev_set_drvdata (&wdev->dev, priv); - ret =lwmi_cd_setup (priv); + ret =lwmi_cd_setup (priv, info->type);if (ret) -return ret; + goto out; - priv->acpi_nb.notifier_call = lwmi_cd01_notifier_call; +switch (info->type) { +case LENOVO_CAPABILITY_DATA_01 : + priv->acpi_nb.notifier_call = lwmi_cd01_notifier_call; - ret =register_acpi_notifier (&priv->acpi_nb); -if (ret) -return ret; + ret =register_acpi_notifier (&priv->acpi_nb); +if (ret) + goto out; - ret =devm_add_action_or_reset (&wdev->dev, lwmi_cd01_unregister, &priv->acpi_nb); -if (ret) -return ret; + ret =devm_add_action_or_reset (&wdev->dev, lwmi_cd01_unregister, + &priv->acpi_nb); +if (ret) + goto out;drivers/platform/x86/lenovo/wmi-capdata.c static int lwmi_cd_probe(struct wmi_device *wdev, const void *context) · line 375
Quoted 10 lines
drivers/platform/x86/lenovo/wmi-capdata.c +8
-1-return component_add (&wdev->dev, &lwmi_cd_component_ops); + ret =component_add (&wdev->dev, &lwmi_cd_component_ops); + goto out; +default : +return -EINVAL ; + } +out: +if (ret) { + dev_err(&wdev->dev, "failed to register %s: %d\n",Include?
Quoted 6 lines
drivers/platform/x86/lenovo/wmi-capdata.c static int lwmi_cd_probe(struct wmi_device *wdev, const void *context) · line 379
Quoted 4 lines
drivers/platform/x86/lenovo/wmi-capdata.c +4
-0+ info->name, ret); + }else { +dev_info (&wdev->dev,"registered %s with %u items\n" , + info->name, priv->list->count);Success path should be quiet.
Will turn it into dev_dbg(). Thanks.
Thanks,
Rong
Quoted 133 lines
Quoted 11 lines
drivers/platform/x86/lenovo/wmi-capdata.c +6
-1+ } +return ret; }static void lwmi_cd_remove (struct wmi_device *wdev) { -component_del (&wdev->dev, &lwmi_cd_component_ops); +struct lwmi_cd_priv *priv =dev_get_drvdata (&wdev->dev); + +switch (priv->list->type) { +case LENOVO_CAPABILITY_DATA_01 :drivers/platform/x86/lenovo/wmi-capdata.c static int lwmi_cd_probe(struct wmi_device *wdev, const void *context) · line 399
Quoted 10 lines
drivers/platform/x86/lenovo/wmi-capdata.c +8
-0+component_del (&wdev->dev, &lwmi_cd_component_ops); +break ; +default : +WARN_ON (1 ); + } } +#define LWMI_CD_WDEV_ID (_type) \ + .guid_string = _type##_GUID, \ + .context = &lwmi_cd_table[_type]Add comma.
Quoted 61 lines
drivers/platform/x86/lenovo/wmi-capdata.c +3
-14+static const struct wmi_device_id lwmi_cd_id_table[] = { - {LENOVO_CAPABILITY_DATA_01_GUID ,NULL }, + {LWMI_CD_WDEV_ID (LENOVO_CAPABILITY_DATA_01 ) }, {} };@@ -283,22 +414,10 @@ static struct wmi_driver lwmi_cd_driver = { .no_singleton = true, }; -/** -* lwmi_cd01_match() - Match rule for the master driver. -* @dev: Pointer to the capability data 01 parent device. -* @data: Unused void pointer for passing match criteria. -* -* Return: int. -*/ -int lwmi_cd01_match (struct device *dev,void *data) -{ -return dev->driver == &lwmi_cd_driver.driver; -} -EXPORT_SYMBOL_NS_GPL (lwmi_cd01_match,"LENOVO_WMI_CD" ); -module_wmi_driver (lwmi_cd_driver);MODULE_DEVICE_TABLE (wmi, lwmi_cd_id_table);MODULE_AUTHOR ("Derek J. Clark <[email protected]>" ); +MODULE_AUTHOR ("Rong Zhang <[email protected]>" );MODULE_DESCRIPTION ("Lenovo Capability Data WMI Driver" );MODULE_LICENSE ("GPL" );drivers/platform/x86/lenovo/wmi-capdata.h +6
-1@@ -7,6 +7,7 @@#include <linux/types.h> +struct component_match ;struct device ;struct cd_list ;@@ -19,7 +20,11 @@ struct capdata01 { u32 max_value; }; +struct lwmi_cd_binder { +struct cd_list *cd01_list; +}; + +void lwmi_cd_match_add_all (struct device *master,struct component_match **matchptr);int lwmi_cd01_get_data (struct cd_list *list,u32 attribute_id,struct capdata01 *output); -int lwmi_cd01_match (struct device *dev,void *data);#endif /* !_LENOVO_WMI_CAPDATA_H_ */ drivers/platform/x86/lenovo/wmi-other.c +0
-0drivers/platform/x86/lenovo/wmi-other.c static void lwmi_om_fw_attr_remove(struct lwmi_om_priv *priv) · line 582
Quoted 5 lines
drivers/platform/x86/lenovo/wmi-other.c +1
-1@@ -579,14 +579,14 @@ static void lwmi_om_fw_attr_remove(struct lwmi_om_priv *priv)static int lwmi_om_master_bind (struct device *dev) {struct lwmi_om_priv *priv =dev_get_drvdata (dev); -struct cd_list *tmp_list; +struct lwmi_cd_binder binder = {0 };= {} is enough to initialize to default values.
Quoted 40 lines
drivers/platform/x86/lenovo/wmi-other.c +10
-4int ret; - ret =component_bind_all (dev, &tmp_list); + ret =component_bind_all (dev, &binder);if (ret)return ret; - priv->cd01_list = tmp_list; + priv->cd01_list = binder.cd01_list;if (!priv->cd01_list)return -ENODEV ;@@ -623,10 +623,13 @@ static int lwmi_other_probe(struct wmi_device *wdev, const void *context)if (!priv)return -ENOMEM ; +/* Sentinel for on-demand ida_free(). */ + priv->ida_id = -EIDRM ; + priv->wdev = wdev;dev_set_drvdata (&wdev->dev, priv); -component_match_add (&wdev->dev, &master_match, lwmi_cd01_match,NULL ); +lwmi_cd_match_add_all (&wdev->dev, &master_match);if (IS_ERR (master_match))return PTR_ERR (master_match);@@ -639,7 +642,10 @@ static void lwmi_other_remove(struct wmi_device *wdev)struct lwmi_om_priv *priv =dev_get_drvdata (&wdev->dev);component_master_del (&wdev->dev, &lwmi_om_master_ops); -ida_free (&lwmi_om_ida, priv->ida_id); + +/* No IDA to free if the driver is never bound to its components. */ +if (priv->ida_id >=0 ) +ida_free (&lwmi_om_ida, priv->ida_id); }static const struct wmi_device_id lwmi_other_id_table[] = {
PATCH v6 4/7 platform/x86: lenovo-wmi-capdata: Add support for Capability Data 00
In reply to Rong ZhangAdd support for LENOVO_CAPABILITY_DATA_00 WMI data block that comes on "Other Mode" enabled hardware. Provides an interface for querying if a given attribute is supported by the hardware, as well as its default value.
capdata00 always presents on devices with capdata01. lenovo-wmi-other now binds to both (no functional change intended).
---
Changes in v4:
- Rebase on top of changes made to [PATCH v4 3/7]
Changes in v2:
- Reword documentation (thanks Derek J. Clark)
--- .../wmi/devices/lenovo-wmi-other.rst | 15 ++++++++--- drivers/platform/x86/lenovo/wmi-capdata.c | 25 +++++++++++++++++++ drivers/platform/x86/lenovo/wmi-capdata.h | 8 ++++++ 3 files changed, 45 insertions(+), 3 deletions(-)
Documentation/wmi/devices/lenovo-wmi-other.rst +12 -3
@@ -31,13 +31,22 @@ under the following path: /sys/class/firmware-attributes/lenovo-wmi-other/attributes/<attribute>/ +LENOVO_CAPABILITY_DATA_00 +------------------------- + +WMI GUID ``362A3AFE-3D96-4665-8530-96DAD5BB300E`` + +The LENOVO_CAPABILITY_DATA_00 interface provides various information that +does not rely on the gamezone thermal mode. + LENOVO_CAPABILITY_DATA_01 ------------------------- WMI GUID ``7A8F5407-CB67-4D6E-B547-39B3BE018154`` -The LENOVO_CAPABILITY_DATA_01 interface provides information on various -power limits of integrated CPU and GPU components. +The LENOVO_CAPABILITY_DATA_01 interface provides various information that +relies on the gamezone thermal mode, including power limits of integrated +CPU and GPU components. Each attribute has the following properties: - current_value
@@ -48,7 +57,7 @@ Each attribute has the following properties: - scalar_increment - type -The following attributes are implemented: +The following firmware-attributes are implemented: - ppt_pl1_spl: Platform Profile Tracking Sustained Power Limit - ppt_pl2_sppt: Platform Profile Tracking Slow Package Power Tracking - ppt_pl3_fppt: Platform Profile Tracking Fast Package Power Tracking
drivers/platform/x86/lenovo/wmi-capdata.c +25 -0
@@ -5,6 +5,9 @@* Lenovo Capability Data provides information on tunable attributes used by * the "Other Mode" WMI interface. * +* Capability Data 00 includes if the attribute is supported by the hardware, +* and the default_value. All attributes are independent of thermal modes. +* * Capability Data 01 includes if the attribute is supported by the hardware, * and the default_value, max_value, min_value, and step increment. Each * attribute has multiple pages, one for each of the thermal modes managed by
@@ -36,12 +39,14 @@#include "wmi-capdata.h" +#define LENOVO_CAPABILITY_DATA_00_GUID "362A3AFE-3D96-4665-8530-96DAD5BB300E"#define LENOVO_CAPABILITY_DATA_01_GUID "7A8F5407-CB67-4D6E-B547-39B3BE018154"#define ACPI_AC_CLASS "ac_adapter"#define ACPI_AC_NOTIFY_STATUS 0x80enum lwmi_cd_type { +LENOVO_CAPABILITY_DATA_00 ,LENOVO_CAPABILITY_DATA_01 , };
@@ -55,6 +60,7 @@ static const struct lwmi_cd_info {const char *name;enum lwmi_cd_type type; } lwmi_cd_table[] = { +LWMI_CD_TABLE_ITEM (LENOVO_CAPABILITY_DATA_00 ), LWMI_CD_TABLE_ITEM(LENOVO_CAPABILITY_DATA_01), };
@@ -70,6 +76,7 @@ struct cd_list {u8 count;union { + DECLARE_FLEX_ARRAY(struct capdata00, cd00); DECLARE_FLEX_ARRAY(struct capdata01, cd01); }; };
@@ -137,6 +144,9 @@ static int lwmi_cd_component_bind(struct device *cd_dev,struct lwmi_cd_binder *binder = data;switch (priv->list->type) { +case LENOVO_CAPABILITY_DATA_00 : + binder->cd00_list = priv->list; +break ;case LENOVO_CAPABILITY_DATA_01 : binder->cd01_list = priv->list;break ;
@@ -178,6 +188,9 @@ static const struct component_ops lwmi_cd_component_ops = {return -EINVAL ; \ } +DEF_LWMI_CDXX_GET_DATA(cd00, LENOVO_CAPABILITY_DATA_00, struct capdata00); +EXPORT_SYMBOL_NS_GPL (lwmi_cd00_get_data,"LENOVO_WMI_CD" ); + DEF_LWMI_CDXX_GET_DATA(cd01, LENOVO_CAPABILITY_DATA_01, struct capdata01);EXPORT_SYMBOL_NS_GPL (lwmi_cd01_get_data,"LENOVO_WMI_CD" );
@@ -196,6 +209,10 @@ static int lwmi_cd_cache(struct lwmi_cd_priv *priv)void *p;switch (priv->list->type) { +case LENOVO_CAPABILITY_DATA_00 : + p = &priv->list->cd00[0 ]; + size =sizeof (priv->list->cd00[0 ]); +break ;case LENOVO_CAPABILITY_DATA_01 : p = &priv->list->cd01[0 ]; size =sizeof (priv->list->cd01[0 ]);
@@ -241,6 +258,9 @@ static int lwmi_cd_alloc(struct lwmi_cd_priv *priv, enum lwmi_cd_type type) count =wmidev_instance_count (priv->wdev);switch (type) { +case LENOVO_CAPABILITY_DATA_00 : + list_size =struct_size (list, cd00, count); +break ;case LENOVO_CAPABILITY_DATA_01 : list_size =struct_size (list, cd01, count);break ;
@@ -353,6 +373,9 @@ static int lwmi_cd_probe(struct wmi_device *wdev, const void *context) goto out;switch (info->type) { +case LENOVO_CAPABILITY_DATA_00 : + ret =component_add (&wdev->dev, &lwmi_cd_component_ops); + goto out;case LENOVO_CAPABILITY_DATA_01 : priv->acpi_nb.notifier_call = lwmi_cd01_notifier_call;
@@ -386,6 +409,7 @@ static void lwmi_cd_remove(struct wmi_device *wdev)struct lwmi_cd_priv *priv =dev_get_drvdata (&wdev->dev);switch (priv->list->type) { +case LENOVO_CAPABILITY_DATA_00 :case LENOVO_CAPABILITY_DATA_01 :component_del (&wdev->dev, &lwmi_cd_component_ops);break ;
@@ -399,6 +423,7 @@ static void lwmi_cd_remove(struct wmi_device *wdev) .context = &lwmi_cd_table[_type] static const struct wmi_device_id lwmi_cd_id_table[] = { + {LWMI_CD_WDEV_ID (LENOVO_CAPABILITY_DATA_00 ) }, {LWMI_CD_WDEV_ID (LENOVO_CAPABILITY_DATA_01 ) }, {} };
drivers/platform/x86/lenovo/wmi-capdata.h +8 -0
@@ -11,6 +11,12 @@ struct component_match;struct device ;struct cd_list ; +struct capdata00 { +u32 id; +u32 supported; +u32 default_value; +}; +struct capdata01 {u32 id;u32 supported;
@@ -21,10 +27,12 @@ struct capdata01 { };struct lwmi_cd_binder { +struct cd_list *cd00_list;struct cd_list *cd01_list; };void lwmi_cd_match_add_all (struct device *master,struct component_match **matchptr); +int lwmi_cd00_get_data (struct cd_list *list,u32 attribute_id,struct capdata00 *output);int lwmi_cd01_get_data (struct cd_list *list,u32 attribute_id,struct capdata01 *output);#endif /* !_LENOVO_WMI_CAPDATA_H_ */
Signature · 1 line
2.51.0
PATCH v6 5/7 platform/x86: lenovo-wmi-capdata: Add support for Fan Test Data
In reply to Rong ZhangAdd support for LENOVO_FAN_TEST_DATA WMI data block. Provides an interface for querying the min/max fan speed RPM (reference data) of a given fan ID.
This interface is optional. Hence, it does not bind to lenovo-wmi-other and is not registered as a component for the moment. Appropriate binding will be implemented in the subsequent patch.
---
Changes in v4:
- Rebase on top of changes made to [PATCH v4 3/7]
- Do not register it as a component until [PATCH v4 6/7]
Changes in v2:
- Reword documentation
--- .../wmi/devices/lenovo-wmi-other.rst | 17 +++ drivers/platform/x86/lenovo/wmi-capdata.c | 102 ++++++++++++++++++ drivers/platform/x86/lenovo/wmi-capdata.h | 7 ++ 3 files changed, 126 insertions(+)
Documentation/wmi/devices/lenovo-wmi-other.rst +17 -0
@@ -62,6 +62,13 @@ The following firmware-attributes are implemented: - ppt_pl2_sppt: Platform Profile Tracking Slow Package Power Tracking - ppt_pl3_fppt: Platform Profile Tracking Fast Package Power Tracking +LENOVO_FAN_TEST_DATA +------------------------- + +WMI GUID ``B642801B-3D21-45DE-90AE-6E86F164FB21`` + +The LENOVO_FAN_TEST_DATA interface provides reference data for self-test of +cooling fans. WMI interface description =========================
@@ -115,3 +122,13 @@ data using the `bmfdec <https://github.com/pali/bmfdec>`_ utility: [WmiDataId(3), read, Description("Data Size.")] uint32 DataSize; [WmiDataId(4), read, Description("Default Value"), WmiSizeIs("DataSize")] uint8 DefaultValue[]; }; + + [WMI, Dynamic, Provider("WmiProv"), Locale("MS\\0x409"), Description("Definition of Fan Test Data"), guid("{B642801B-3D21-45DE-90AE-6E86F164FB21}")] + class LENOVO_FAN_TEST_DATA { + [key, read] string InstanceName; + [read] boolean Active; + [WmiDataId(1), read, Description("Mode.")] uint32 NumOfFans; + [WmiDataId(2), read, Description("Fan ID."), WmiSizeIs("NumOfFans")] uint32 FanId[]; + [WmiDataId(3), read, Description("Maximum Fan Speed."), WmiSizeIs("NumOfFans")] uint32 FanMaxSpeed[]; + [WmiDataId(4), read, Description("Minumum Fan Speed."), WmiSizeIs("NumOfFans")] uint32 FanMinSpeed[]; + };
drivers/platform/x86/lenovo/wmi-capdata.c +102 -0
186 lines not on this page · raw message
drivers/platform/x86/lenovo/wmi-capdata.h +7 -0
@@ -26,6 +26,12 @@ struct capdata01 {u32 max_value; }; +struct capdata_fan { +u32 id; +u32 min_rpm; +u32 max_rpm; +}; +struct lwmi_cd_binder {struct cd_list *cd00_list;struct cd_list *cd01_list;
@@ -34,5 +40,6 @@ struct lwmi_cd_binder {void lwmi_cd_match_add_all (struct device *master,struct component_match **matchptr);int lwmi_cd00_get_data (struct cd_list *list,u32 attribute_id,struct capdata00 *output);int lwmi_cd01_get_data (struct cd_list *list,u32 attribute_id,struct capdata01 *output); +int lwmi_cd_fan_get_data (struct cd_list *list,u32 attribute_id,struct capdata_fan *output);#endif /* !_LENOVO_WMI_CAPDATA_H_ */
Signature · 1 line
2.51.0
Ilpo Järvinen
maintainerRe: [PATCH v6 5/7] platform/x86: lenovo-wmi-capdata: Add support for Fan Test Data
Quoted 139 lines · Rong Zhang
Add support for
LENOVO_FAN_TEST_DATAWMI data block. Provides an interface for querying the min/max fan speed RPM (reference data) of a given fan ID.This interface is optional. Hence, it does not bind to lenovo-wmi-other and is not registered as a component for the moment. Appropriate binding will be implemented in the subsequent patch.
Signed-off-by Rong Zhang <[email protected]>Reviewed-by Derek J. Clark <[email protected]>Tested-by Derek J. Clark <[email protected]>---
Changes in v4:
- Rebase on top of changes made to [PATCH v4 3/7]
- Do not register it as a component until [PATCH v4 6/7]Changes in v2:
- Reword documentation--- .../wmi/devices/lenovo-wmi-other.rst | 17 +++ drivers/platform/x86/lenovo/wmi-capdata.c | 102 ++++++++++++++++++ drivers/platform/x86/lenovo/wmi-capdata.h | 7 ++ 3 files changed, 126 insertions(+)Documentation/wmi/devices/lenovo-wmi-other.rst +17
-0@@ -62,6 +62,13 @@ The following firmware-attributes are implemented: - ppt_pl2_sppt: Platform Profile Tracking Slow Package Power Tracking - ppt_pl3_fppt: Platform Profile Tracking Fast Package Power Tracking +LENOVO_FAN_TEST_DATA +------------------------- + +WMI GUID ``B642801B-3D21-45DE-90AE-6E86F164FB21`` + +The LENOVO_FAN_TEST_DATA interface provides reference data for self-test of +cooling fans. WMI interface description =========================@@ -115,3 +122,13 @@ data using the `bmfdec <https://github.com/pali/bmfdec>`_ utility: [WmiDataId(3), read, Description("Data Size.")] uint32 DataSize; [WmiDataId(4), read, Description("Default Value"), WmiSizeIs("DataSize")] uint8 DefaultValue[]; }; + + [WMI, Dynamic, Provider("WmiProv"), Locale("MS\\0x409"), Description("Definition of Fan Test Data"), guid("{B642801B-3D21-45DE-90AE-6E86F164FB21}")] + class LENOVO_FAN_TEST_DATA { + [key, read] string InstanceName; + [read] boolean Active; + [WmiDataId(1), read, Description("Mode.")] uint32 NumOfFans; + [WmiDataId(2), read, Description("Fan ID."), WmiSizeIs("NumOfFans")] uint32 FanId[]; + [WmiDataId(3), read, Description("Maximum Fan Speed."), WmiSizeIs("NumOfFans")] uint32 FanMaxSpeed[]; + [WmiDataId(4), read, Description("Minumum Fan Speed."), WmiSizeIs("NumOfFans")] uint32 FanMinSpeed[]; + };drivers/platform/x86/lenovo/wmi-capdata.c +19
-0@@ -13,6 +13,10 @@* attribute has multiple pages, one for each of the thermal modes managed by * the Gamezone interface. * +* Fan Test Data includes the max/min fan speed RPM for each fan. This is +* reference data for self-test. If the fan is in good condition, it is capable +* to spin faster than max RPM or slower than min RPM. +* * Copyright (C) 2025 Derek J. Clark <[email protected]> * - Initial implementation (formerly named lenovo-wmi-capdata01) * @@ -41,6 +45,7 @@#define LENOVO_CAPABILITY_DATA_00_GUID "362A3AFE-3D96-4665-8530-96DAD5BB300E"#define LENOVO_CAPABILITY_DATA_01_GUID "7A8F5407-CB67-4D6E-B547-39B3BE018154" +#define LENOVO_FAN_TEST_DATA_GUID "B642801B-3D21-45DE-90AE-6E86F164FB21"#define ACPI_AC_CLASS "ac_adapter"#define ACPI_AC_NOTIFY_STATUS 0x80@@ -48,6 +53,7 @@enum lwmi_cd_type {LENOVO_CAPABILITY_DATA_00 ,LENOVO_CAPABILITY_DATA_01 , +LENOVO_FAN_TEST_DATA , };#define LWMI_CD_TABLE_ITEM (_type) \@@ -62,6 +68,7 @@ static const struct lwmi_cd_info { } lwmi_cd_table[] = {LWMI_CD_TABLE_ITEM (LENOVO_CAPABILITY_DATA_00 ),LWMI_CD_TABLE_ITEM (LENOVO_CAPABILITY_DATA_01 ), + LWMI_CD_TABLE_ITEM(LENOVO_FAN_TEST_DATA), }; struct lwmi_cd_priv {@@ -78,6 +85,7 @@ struct cd_list {union { DECLARE_FLEX_ARRAY(struct capdata00, cd00); DECLARE_FLEX_ARRAY(struct capdata01, cd01); + DECLARE_FLEX_ARRAY(struct capdata_fan, cd_fan); }; };@@ -117,6 +125,10 @@ void lwmi_cd_match_add_all(struct device *master, struct component_match **matchreturn ;for (i =0 ; i <ARRAY_SIZE (lwmi_cd_table); i++) { +/* Skip optional interfaces. */ +if (lwmi_cd_table[i].type ==LENOVO_FAN_TEST_DATA ) +continue ; +component_match_add (master, matchptr, lwmi_cd_match, (void *)&lwmi_cd_table[i].type);if (IS_ERR (*matchptr))@@ -194,6 +206,9 @@ EXPORT_SYMBOL_NS_GPL(lwmi_cd00_get_data, "LENOVO_WMI_CD"); DEF_LWMI_CDXX_GET_DATA(cd01, LENOVO_CAPABILITY_DATA_01, struct capdata01);EXPORT_SYMBOL_NS_GPL (lwmi_cd01_get_data,"LENOVO_WMI_CD" ); +DEF_LWMI_CDXX_GET_DATA(cd_fan, LENOVO_FAN_TEST_DATA, struct capdata_fan); +EXPORT_SYMBOL_NS_GPL (lwmi_cd_fan_get_data,"LENOVO_WMI_CD" ); +/** * lwmi_cd_cache() - Cache all WMI data block information * @priv: lenovo-wmi-capdata driver data. @@ -217,6 +232,9 @@ static int lwmi_cd_cache(struct lwmi_cd_priv *priv) p = &priv->list->cd01[0 ]; size =sizeof (priv->list->cd01[0 ]);break ; +case LENOVO_FAN_TEST_DATA : +/* Done by lwmi_cd_alloc() => lwmi_cd_fan_list_alloc_cache(). */ +return 0 ;default :return -EINVAL ; }@@ -239,6 +257,78 @@ static int lwmi_cd_cache(struct lwmi_cd_priv *priv)return 0 ; } +/**
drivers/platform/x86/lenovo/wmi-capdata.c static int lwmi_cd_cache(struct lwmi_cd_priv *priv) · line 270
Quoted 10 lines
drivers/platform/x86/lenovo/wmi-capdata.c +10
-0+* lwmi_cd_fan_list_alloc_cache() - Alloc and cache Fan Test Data list +* @priv: lenovo-wmi-capdata driver data. +* @listptr: Pointer to returned cd_list pointer. +* +* Return: count of fans found, or an error. +*/ +static int lwmi_cd_fan_list_alloc_cache (struct lwmi_cd_priv *priv,struct cd_list **listptr) +{ +u32 count, *fan_ids, *fan_min_rpms, *fan_max_rpms; + union acpi_object *ret_obj __free(kfree) = NULL;
Since you're using __free(), please move this to where you assign the value. This is to create a pattern with cleanup helpers. The cleanup order depends on the order the variables are introduced which in some other cases may be significant.
drivers/platform/x86/lenovo/wmi-capdata.c static int lwmi_cd_cache(struct lwmi_cd_priv *priv) · line 271
Quoted 1 line
drivers/platform/x86/lenovo/wmi-capdata.c +1
-0+struct block {u32 nr;u32 data[]; } *block;
This is the first time I see this style anywhere in the kernel's context, has there been some general discussion about this style somewhere?
At least it seems immediately obvious to me that this style will have a negative impact on documentability due to (too) concise use of space.
Quoted 10 lines
drivers/platform/x86/lenovo/wmi-capdata.c +10
-0+struct cd_list *list; +size_t size; +int idx; + + ret_obj =wmidev_block_query (priv->wdev,0 ); +if (!ret_obj) +return -ENODEV ; + +/* +* This is usually caused by a dummy ACPI method. Do not return an error
drivers/platform/x86/lenovo/wmi-capdata.c static int lwmi_cd_cache(struct lwmi_cd_priv *priv) · line 291
Quoted 10 lines
drivers/platform/x86/lenovo/wmi-capdata.c +10
-0+* as failing to probe this device will result in master driver being +* unbound - this behavior aligns with lwmi_cd_cache(). +*/ +if (ret_obj->type !=ACPI_TYPE_BUFFER ) { + count =0 ; + goto alloc; + } + + size = ret_obj->buffer.length; + block = (struct block *)ret_obj->buffer.pointer;
void * can be cast implicitly.
Quoted 12 lines
drivers/platform/x86/lenovo/wmi-capdata.c +12
-0+ + count = size >=sizeof (*block) ? block->nr :0 ; +if (size <struct_size (block, data, count *3 )) { +dev_warn (&priv->wdev->dev, +"incomplete fan test data block: %zu < %zu, ignoring\n" , + size,struct_size (block, data, count *3 )); + count =0 ; + } + +if (count ==0 ) + goto alloc; +
drivers/platform/x86/lenovo/wmi-capdata.c static int lwmi_cd_cache(struct lwmi_cd_priv *priv) · line 313
Quoted 10 lines
drivers/platform/x86/lenovo/wmi-capdata.c +10
-0+if (count >U8_MAX ) { +dev_warn (&priv->wdev->dev, +"too many fans reported: %u > %u, truncating\n" , + count,U8_MAX ); + count =U8_MAX ; + } + + fan_ids = &block->data[0 ]; + fan_max_rpms = &block->data[count]; + fan_min_rpms = &block->data[count *2 ];
Please rearrange so you can remove the goto:
1. limit count
if (count) {
...
}Quoted 93 lines
drivers/platform/x86/lenovo/wmi-capdata.c +30
-0+ +alloc: + list =devm_kzalloc (&priv->wdev->dev,struct_size (list, cd_fan, count),GFP_KERNEL ); +if (!list) +return -ENOMEM ; + +for (idx =0 ; idx < count; idx++) { + list->cd_fan[idx] = (struct capdata_fan ) { + .id = fan_ids[idx], + .min_rpm = fan_min_rpms[idx], + .max_rpm = fan_max_rpms[idx], + }; + } + + *listptr = list; +return count; +} +/** * lwmi_cd_alloc() - Allocate a cd_list struct in drvdata * @priv: lenovo-wmi-capdata driver data. @@ -264,6 +354,12 @@ static int lwmi_cd_alloc(struct lwmi_cd_priv *priv, enum lwmi_cd_type type)case LENOVO_CAPABILITY_DATA_01 : list_size =struct_size (list, cd01, count);break ; +case LENOVO_FAN_TEST_DATA : + count =lwmi_cd_fan_list_alloc_cache (priv, &list); +if (count <0 ) +return count; + + goto got_list;default :return -EINVAL ; }@@ -272,6 +368,7 @@ static int lwmi_cd_alloc(struct lwmi_cd_priv *priv, enum lwmi_cd_type type)if (!list)return -ENOMEM ; +got_list: ret =devm_mutex_init (&priv->wdev->dev, &list->list_mutex);if (ret)return ret;@@ -390,6 +487,8 @@ static int lwmi_cd_probe(struct wmi_device *wdev, const void *context) ret =component_add (&wdev->dev, &lwmi_cd_component_ops); goto out; +case LENOVO_FAN_TEST_DATA : + goto out;default :return -EINVAL ; }@@ -413,6 +512,8 @@ static void lwmi_cd_remove(struct wmi_device *wdev)case LENOVO_CAPABILITY_DATA_01 :component_del (&wdev->dev, &lwmi_cd_component_ops);break ; +case LENOVO_FAN_TEST_DATA : +break ;default :WARN_ON (1 ); }@@ -425,6 +526,7 @@ static void lwmi_cd_remove(struct wmi_device *wdev)static const struct wmi_device_id lwmi_cd_id_table[] = { {LWMI_CD_WDEV_ID (LENOVO_CAPABILITY_DATA_00 ) }, {LWMI_CD_WDEV_ID (LENOVO_CAPABILITY_DATA_01 ) }, + {LWMI_CD_WDEV_ID (LENOVO_FAN_TEST_DATA ) }, {} };drivers/platform/x86/lenovo/wmi-capdata.h +7
-0@@ -26,6 +26,12 @@ struct capdata01 {u32 max_value; }; +struct capdata_fan { +u32 id; +u32 min_rpm; +u32 max_rpm; +}; +struct lwmi_cd_binder {struct cd_list *cd00_list;struct cd_list *cd01_list;@@ -34,5 +40,6 @@ struct lwmi_cd_binder {void lwmi_cd_match_add_all (struct device *master,struct component_match **matchptr);int lwmi_cd00_get_data (struct cd_list *list,u32 attribute_id,struct capdata00 *output);int lwmi_cd01_get_data (struct cd_list *list,u32 attribute_id,struct capdata01 *output); +int lwmi_cd_fan_get_data (struct cd_list *list,u32 attribute_id,struct capdata_fan *output);#endif /* !_LENOVO_WMI_CAPDATA_H_ */
Signature · 1 line
i.
Re: [PATCH v6 5/7] platform/x86: lenovo-wmi-capdata: Add support for Fan Test Data
Hi Ilpo,
Thanks for your review.
Quoted 140 lines · Ilpo Järvinen
Quoted 138 lines · Rong Zhang
Add support for
LENOVO_FAN_TEST_DATAWMI data block. Provides an interface for querying the min/max fan speed RPM (reference data) of a given fan ID.This interface is optional. Hence, it does not bind to lenovo-wmi-other and is not registered as a component for the moment. Appropriate binding will be implemented in the subsequent patch.
Signed-off-by Rong Zhang <[email protected]>Reviewed-by Derek J. Clark <[email protected]>Tested-by Derek J. Clark <[email protected]>---
Changes in v4:
- Rebase on top of changes made to [PATCH v4 3/7]
- Do not register it as a component until [PATCH v4 6/7]Changes in v2:
- Reword documentation--- .../wmi/devices/lenovo-wmi-other.rst | 17 +++ drivers/platform/x86/lenovo/wmi-capdata.c | 102 ++++++++++++++++++ drivers/platform/x86/lenovo/wmi-capdata.h | 7 ++ 3 files changed, 126 insertions(+)Documentation/wmi/devices/lenovo-wmi-other.rst +17
-0@@ -62,6 +62,13 @@ The following firmware-attributes are implemented: - ppt_pl2_sppt: Platform Profile Tracking Slow Package Power Tracking - ppt_pl3_fppt: Platform Profile Tracking Fast Package Power Tracking +LENOVO_FAN_TEST_DATA +------------------------- + +WMI GUID ``B642801B-3D21-45DE-90AE-6E86F164FB21`` + +The LENOVO_FAN_TEST_DATA interface provides reference data for self-test of +cooling fans. WMI interface description =========================@@ -115,3 +122,13 @@ data using the `bmfdec <https://github.com/pali/bmfdec>`_ utility: [WmiDataId(3), read, Description("Data Size.")] uint32 DataSize; [WmiDataId(4), read, Description("Default Value"), WmiSizeIs("DataSize")] uint8 DefaultValue[]; }; + + [WMI, Dynamic, Provider("WmiProv"), Locale("MS\\0x409"), Description("Definition of Fan Test Data"), guid("{B642801B-3D21-45DE-90AE-6E86F164FB21}")] + class LENOVO_FAN_TEST_DATA { + [key, read] string InstanceName; + [read] boolean Active; + [WmiDataId(1), read, Description("Mode.")] uint32 NumOfFans; + [WmiDataId(2), read, Description("Fan ID."), WmiSizeIs("NumOfFans")] uint32 FanId[]; + [WmiDataId(3), read, Description("Maximum Fan Speed."), WmiSizeIs("NumOfFans")] uint32 FanMaxSpeed[]; + [WmiDataId(4), read, Description("Minumum Fan Speed."), WmiSizeIs("NumOfFans")] uint32 FanMinSpeed[]; + };drivers/platform/x86/lenovo/wmi-capdata.c +18
-0@@ -13,6 +13,10 @@* attribute has multiple pages, one for each of the thermal modes managed by * the Gamezone interface. * +* Fan Test Data includes the max/min fan speed RPM for each fan. This is +* reference data for self-test. If the fan is in good condition, it is capable +* to spin faster than max RPM or slower than min RPM. +* * Copyright (C) 2025 Derek J. Clark <[email protected]> * - Initial implementation (formerly named lenovo-wmi-capdata01) * @@ -41,6 +45,7 @@#define LENOVO_CAPABILITY_DATA_00_GUID "362A3AFE-3D96-4665-8530-96DAD5BB300E"#define LENOVO_CAPABILITY_DATA_01_GUID "7A8F5407-CB67-4D6E-B547-39B3BE018154" +#define LENOVO_FAN_TEST_DATA_GUID "B642801B-3D21-45DE-90AE-6E86F164FB21"#define ACPI_AC_CLASS "ac_adapter"#define ACPI_AC_NOTIFY_STATUS 0x80@@ -48,6 +53,7 @@enum lwmi_cd_type {LENOVO_CAPABILITY_DATA_00 ,LENOVO_CAPABILITY_DATA_01 , +LENOVO_FAN_TEST_DATA , };#define LWMI_CD_TABLE_ITEM (_type) \@@ -62,6 +68,7 @@ static const struct lwmi_cd_info { } lwmi_cd_table[] = {LWMI_CD_TABLE_ITEM (LENOVO_CAPABILITY_DATA_00 ),LWMI_CD_TABLE_ITEM (LENOVO_CAPABILITY_DATA_01 ), + LWMI_CD_TABLE_ITEM(LENOVO_FAN_TEST_DATA), }; struct lwmi_cd_priv {@@ -78,6 +85,7 @@ struct cd_list {union { DECLARE_FLEX_ARRAY(struct capdata00, cd00); DECLARE_FLEX_ARRAY(struct capdata01, cd01); + DECLARE_FLEX_ARRAY(struct capdata_fan, cd_fan); }; };@@ -117,6 +125,10 @@ void lwmi_cd_match_add_all(struct device *master, struct component_match **matchreturn ;for (i =0 ; i <ARRAY_SIZE (lwmi_cd_table); i++) { +/* Skip optional interfaces. */ +if (lwmi_cd_table[i].type ==LENOVO_FAN_TEST_DATA ) +continue ; +component_match_add (master, matchptr, lwmi_cd_match, (void *)&lwmi_cd_table[i].type);if (IS_ERR (*matchptr))@@ -194,6 +206,9 @@ EXPORT_SYMBOL_NS_GPL(lwmi_cd00_get_data, "LENOVO_WMI_CD"); DEF_LWMI_CDXX_GET_DATA(cd01, LENOVO_CAPABILITY_DATA_01, struct capdata01);EXPORT_SYMBOL_NS_GPL (lwmi_cd01_get_data,"LENOVO_WMI_CD" ); +DEF_LWMI_CDXX_GET_DATA(cd_fan, LENOVO_FAN_TEST_DATA, struct capdata_fan); +EXPORT_SYMBOL_NS_GPL (lwmi_cd_fan_get_data,"LENOVO_WMI_CD" ); +/** * lwmi_cd_cache() - Cache all WMI data block information * @priv: lenovo-wmi-capdata driver data. @@ -217,6 +232,9 @@ static int lwmi_cd_cache(struct lwmi_cd_priv *priv) p = &priv->list->cd01[0 ]; size =sizeof (priv->list->cd01[0 ]);break ; +case LENOVO_FAN_TEST_DATA : +/* Done by lwmi_cd_alloc() => lwmi_cd_fan_list_alloc_cache(). */ +return 0 ;default :return -EINVAL ; }@@ -239,6 +257,78 @@ static int lwmi_cd_cache(struct lwmi_cd_priv *priv)return 0 ; }
Quoted 16 lines
drivers/platform/x86/lenovo/wmi-capdata.c static int lwmi_cd_cache(struct lwmi_cd_priv *priv) · line 270
Quoted 11 lines
drivers/platform/x86/lenovo/wmi-capdata.c +11
-0+/** +* lwmi_cd_fan_list_alloc_cache() - Alloc and cache Fan Test Data list +* @priv: lenovo-wmi-capdata driver data. +* @listptr: Pointer to returned cd_list pointer. +* +* Return: count of fans found, or an error. +*/ +static int lwmi_cd_fan_list_alloc_cache (struct lwmi_cd_priv *priv,struct cd_list **listptr) +{ +u32 count, *fan_ids, *fan_min_rpms, *fan_max_rpms; + union acpi_object *ret_obj __free(kfree) = NULL;Since you're using
__free(), please move this to where you assign the value. This is to create a pattern with cleanup helpers. The cleanup order depends on the order the variables are introduced which in some other cases may be significant.
Make sense. Will move it to the last declaration lines with its assignment. Thanks.
Quoted 7 lines
drivers/platform/x86/lenovo/wmi-capdata.c static int lwmi_cd_cache(struct lwmi_cd_priv *priv) · line 271
Quoted 1 line
drivers/platform/x86/lenovo/wmi-capdata.c +1
-0+struct block {u32 nr;u32 data[]; } *block;This is the first time I see this style anywhere in the kernel's context, has there been some general discussion about this style somewhere?
At least it seems immediately obvious to me that this style will have a negative impact on documentability due to (too) concise use of space.
Make sense. Will break it into multiple lines. Thanks.
Quoted 14 lines
Quoted 14 lines
drivers/platform/x86/lenovo/wmi-capdata.c +14
-0+struct cd_list *list; +size_t size; +int idx; + + ret_obj =wmidev_block_query (priv->wdev,0 ); +if (!ret_obj) +return -ENODEV ; + +/* +* This is usually caused by a dummy ACPI method. Do not return an error +* as failing to probe this device will result in master driver being +* unbound - this behavior aligns with lwmi_cd_cache(). +*/ +if (ret_obj->type !=ACPI_TYPE_BUFFER ) {
Quoted 8 lines
drivers/platform/x86/lenovo/wmi-capdata.c static int lwmi_cd_cache(struct lwmi_cd_priv *priv) · line 291
Quoted 6 lines
drivers/platform/x86/lenovo/wmi-capdata.c +6
-0+ count =0 ; + goto alloc; + } + + size = ret_obj->buffer.length; + block = (struct block *)ret_obj->buffer.pointer;void * can be cast implicitly.
ret_obj->buffer.pointer' is a u8 *' pointer so the cast is mandatory.
Hmmm, this reminds me that struct block' probably needs a __packed' to generate unaligned access to it.
Quoted 25 lines
Quoted 12 lines
drivers/platform/x86/lenovo/wmi-capdata.c +12
-0+ + count = size >=sizeof (*block) ? block->nr :0 ; +if (size <struct_size (block, data, count *3 )) { +dev_warn (&priv->wdev->dev, +"incomplete fan test data block: %zu < %zu, ignoring\n" , + size,struct_size (block, data, count *3 )); + count =0 ; + } + +if (count ==0 ) + goto alloc; +drivers/platform/x86/lenovo/wmi-capdata.c static int lwmi_cd_cache(struct lwmi_cd_priv *priv) · line 313
Quoted 10 lines
drivers/platform/x86/lenovo/wmi-capdata.c +10
-0+if (count >U8_MAX ) { +dev_warn (&priv->wdev->dev, +"too many fans reported: %u > %u, truncating\n" , + count,U8_MAX ); + count =U8_MAX ; + } + + fan_ids = &block->data[0 ]; + fan_max_rpms = &block->data[count]; + fan_min_rpms = &block->data[count *2 ];Please rearrange so you can remove the goto:
Quoted 4 lines
1. limit count
if (count) {
...
}Nice catch! Will rearrange. Thanks.
Thanks,
Rong
Quoted 93 lines
Quoted 93 lines
drivers/platform/x86/lenovo/wmi-capdata.c +30
-0+ +alloc: + list =devm_kzalloc (&priv->wdev->dev,struct_size (list, cd_fan, count),GFP_KERNEL ); +if (!list) +return -ENOMEM ; + +for (idx =0 ; idx < count; idx++) { + list->cd_fan[idx] = (struct capdata_fan ) { + .id = fan_ids[idx], + .min_rpm = fan_min_rpms[idx], + .max_rpm = fan_max_rpms[idx], + }; + } + + *listptr = list; +return count; +} +/** * lwmi_cd_alloc() - Allocate a cd_list struct in drvdata * @priv: lenovo-wmi-capdata driver data. @@ -264,6 +354,12 @@ static int lwmi_cd_alloc(struct lwmi_cd_priv *priv, enum lwmi_cd_type type)case LENOVO_CAPABILITY_DATA_01 : list_size =struct_size (list, cd01, count);break ; +case LENOVO_FAN_TEST_DATA : + count =lwmi_cd_fan_list_alloc_cache (priv, &list); +if (count <0 ) +return count; + + goto got_list;default :return -EINVAL ; }@@ -272,6 +368,7 @@ static int lwmi_cd_alloc(struct lwmi_cd_priv *priv, enum lwmi_cd_type type)if (!list)return -ENOMEM ; +got_list: ret =devm_mutex_init (&priv->wdev->dev, &list->list_mutex);if (ret)return ret;@@ -390,6 +487,8 @@ static int lwmi_cd_probe(struct wmi_device *wdev, const void *context) ret =component_add (&wdev->dev, &lwmi_cd_component_ops); goto out; +case LENOVO_FAN_TEST_DATA : + goto out;default :return -EINVAL ; }@@ -413,6 +512,8 @@ static void lwmi_cd_remove(struct wmi_device *wdev)case LENOVO_CAPABILITY_DATA_01 :component_del (&wdev->dev, &lwmi_cd_component_ops);break ; +case LENOVO_FAN_TEST_DATA : +break ;default :WARN_ON (1 ); }@@ -425,6 +526,7 @@ static void lwmi_cd_remove(struct wmi_device *wdev)static const struct wmi_device_id lwmi_cd_id_table[] = { {LWMI_CD_WDEV_ID (LENOVO_CAPABILITY_DATA_00 ) }, {LWMI_CD_WDEV_ID (LENOVO_CAPABILITY_DATA_01 ) }, + {LWMI_CD_WDEV_ID (LENOVO_FAN_TEST_DATA ) }, {} };drivers/platform/x86/lenovo/wmi-capdata.h +7
-0@@ -26,6 +26,12 @@ struct capdata01 {u32 max_value; }; +struct capdata_fan { +u32 id; +u32 min_rpm; +u32 max_rpm; +}; +struct lwmi_cd_binder {struct cd_list *cd00_list;struct cd_list *cd01_list;@@ -34,5 +40,6 @@ struct lwmi_cd_binder {void lwmi_cd_match_add_all (struct device *master,struct component_match **matchptr);int lwmi_cd00_get_data (struct cd_list *list,u32 attribute_id,struct capdata00 *output);int lwmi_cd01_get_data (struct cd_list *list,u32 attribute_id,struct capdata01 *output); +int lwmi_cd_fan_get_data (struct cd_list *list,u32 attribute_id,struct capdata_fan *output);#endif /* !_LENOVO_WMI_CAPDATA_H_ */
Ilpo Järvinen
maintainerRe: [PATCH v6 5/7] platform/x86: lenovo-wmi-capdata: Add support for Fan Test Data
Quoted 194 lines · Rong Zhang
Quoted 140 lines · Ilpo Järvinen
Quoted 138 lines · Rong Zhang
Add support for
LENOVO_FAN_TEST_DATAWMI data block. Provides an interface for querying the min/max fan speed RPM (reference data) of a given fan ID.This interface is optional. Hence, it does not bind to lenovo-wmi-other and is not registered as a component for the moment. Appropriate binding will be implemented in the subsequent patch.
Signed-off-by Rong Zhang <[email protected]>Reviewed-by Derek J. Clark <[email protected]>Tested-by Derek J. Clark <[email protected]>---
Changes in v4:
- Rebase on top of changes made to [PATCH v4 3/7]
- Do not register it as a component until [PATCH v4 6/7]Changes in v2:
- Reword documentation--- .../wmi/devices/lenovo-wmi-other.rst | 17 +++ drivers/platform/x86/lenovo/wmi-capdata.c | 102 ++++++++++++++++++ drivers/platform/x86/lenovo/wmi-capdata.h | 7 ++ 3 files changed, 126 insertions(+)Documentation/wmi/devices/lenovo-wmi-other.rst +17
-0@@ -62,6 +62,13 @@ The following firmware-attributes are implemented: - ppt_pl2_sppt: Platform Profile Tracking Slow Package Power Tracking - ppt_pl3_fppt: Platform Profile Tracking Fast Package Power Tracking +LENOVO_FAN_TEST_DATA +------------------------- + +WMI GUID ``B642801B-3D21-45DE-90AE-6E86F164FB21`` + +The LENOVO_FAN_TEST_DATA interface provides reference data for self-test of +cooling fans. WMI interface description =========================@@ -115,3 +122,13 @@ data using the `bmfdec <https://github.com/pali/bmfdec>`_ utility: [WmiDataId(3), read, Description("Data Size.")] uint32 DataSize; [WmiDataId(4), read, Description("Default Value"), WmiSizeIs("DataSize")] uint8 DefaultValue[]; }; + + [WMI, Dynamic, Provider("WmiProv"), Locale("MS\\0x409"), Description("Definition of Fan Test Data"), guid("{B642801B-3D21-45DE-90AE-6E86F164FB21}")] + class LENOVO_FAN_TEST_DATA { + [key, read] string InstanceName; + [read] boolean Active; + [WmiDataId(1), read, Description("Mode.")] uint32 NumOfFans; + [WmiDataId(2), read, Description("Fan ID."), WmiSizeIs("NumOfFans")] uint32 FanId[]; + [WmiDataId(3), read, Description("Maximum Fan Speed."), WmiSizeIs("NumOfFans")] uint32 FanMaxSpeed[]; + [WmiDataId(4), read, Description("Minumum Fan Speed."), WmiSizeIs("NumOfFans")] uint32 FanMinSpeed[]; + };drivers/platform/x86/lenovo/wmi-capdata.c +18
-0@@ -13,6 +13,10 @@* attribute has multiple pages, one for each of the thermal modes managed by * the Gamezone interface. * +* Fan Test Data includes the max/min fan speed RPM for each fan. This is +* reference data for self-test. If the fan is in good condition, it is capable +* to spin faster than max RPM or slower than min RPM. +* * Copyright (C) 2025 Derek J. Clark <[email protected]> * - Initial implementation (formerly named lenovo-wmi-capdata01) * @@ -41,6 +45,7 @@#define LENOVO_CAPABILITY_DATA_00_GUID "362A3AFE-3D96-4665-8530-96DAD5BB300E"#define LENOVO_CAPABILITY_DATA_01_GUID "7A8F5407-CB67-4D6E-B547-39B3BE018154" +#define LENOVO_FAN_TEST_DATA_GUID "B642801B-3D21-45DE-90AE-6E86F164FB21"#define ACPI_AC_CLASS "ac_adapter"#define ACPI_AC_NOTIFY_STATUS 0x80@@ -48,6 +53,7 @@enum lwmi_cd_type {LENOVO_CAPABILITY_DATA_00 ,LENOVO_CAPABILITY_DATA_01 , +LENOVO_FAN_TEST_DATA , };#define LWMI_CD_TABLE_ITEM (_type) \@@ -62,6 +68,7 @@ static const struct lwmi_cd_info { } lwmi_cd_table[] = {LWMI_CD_TABLE_ITEM (LENOVO_CAPABILITY_DATA_00 ),LWMI_CD_TABLE_ITEM (LENOVO_CAPABILITY_DATA_01 ), + LWMI_CD_TABLE_ITEM(LENOVO_FAN_TEST_DATA), }; struct lwmi_cd_priv {@@ -78,6 +85,7 @@ struct cd_list {union { DECLARE_FLEX_ARRAY(struct capdata00, cd00); DECLARE_FLEX_ARRAY(struct capdata01, cd01); + DECLARE_FLEX_ARRAY(struct capdata_fan, cd_fan); }; };@@ -117,6 +125,10 @@ void lwmi_cd_match_add_all(struct device *master, struct component_match **matchreturn ;for (i =0 ; i <ARRAY_SIZE (lwmi_cd_table); i++) { +/* Skip optional interfaces. */ +if (lwmi_cd_table[i].type ==LENOVO_FAN_TEST_DATA ) +continue ; +component_match_add (master, matchptr, lwmi_cd_match, (void *)&lwmi_cd_table[i].type);if (IS_ERR (*matchptr))@@ -194,6 +206,9 @@ EXPORT_SYMBOL_NS_GPL(lwmi_cd00_get_data, "LENOVO_WMI_CD"); DEF_LWMI_CDXX_GET_DATA(cd01, LENOVO_CAPABILITY_DATA_01, struct capdata01);EXPORT_SYMBOL_NS_GPL (lwmi_cd01_get_data,"LENOVO_WMI_CD" ); +DEF_LWMI_CDXX_GET_DATA(cd_fan, LENOVO_FAN_TEST_DATA, struct capdata_fan); +EXPORT_SYMBOL_NS_GPL (lwmi_cd_fan_get_data,"LENOVO_WMI_CD" ); +/** * lwmi_cd_cache() - Cache all WMI data block information * @priv: lenovo-wmi-capdata driver data. @@ -217,6 +232,9 @@ static int lwmi_cd_cache(struct lwmi_cd_priv *priv) p = &priv->list->cd01[0 ]; size =sizeof (priv->list->cd01[0 ]);break ; +case LENOVO_FAN_TEST_DATA : +/* Done by lwmi_cd_alloc() => lwmi_cd_fan_list_alloc_cache(). */ +return 0 ;default :return -EINVAL ; }@@ -239,6 +257,78 @@ static int lwmi_cd_cache(struct lwmi_cd_priv *priv)return 0 ; }Quoted 16 lines
drivers/platform/x86/lenovo/wmi-capdata.c static int lwmi_cd_cache(struct lwmi_cd_priv *priv) · line 270
Quoted 11 lines
drivers/platform/x86/lenovo/wmi-capdata.c +11
-0+/** +* lwmi_cd_fan_list_alloc_cache() - Alloc and cache Fan Test Data list +* @priv: lenovo-wmi-capdata driver data. +* @listptr: Pointer to returned cd_list pointer. +* +* Return: count of fans found, or an error. +*/ +static int lwmi_cd_fan_list_alloc_cache (struct lwmi_cd_priv *priv,struct cd_list **listptr) +{ +u32 count, *fan_ids, *fan_min_rpms, *fan_max_rpms; + union acpi_object *ret_obj __free(kfree) = NULL;Since you're using
__free(), please move this to where you assign the value. This is to create a pattern with cleanup helpers. The cleanup order depends on the order the variables are introduced which in some other cases may be significant.Make sense. Will move it to the last declaration lines with its assignment. Thanks.
Quoted 7 lines
drivers/platform/x86/lenovo/wmi-capdata.c static int lwmi_cd_cache(struct lwmi_cd_priv *priv) · line 271
Quoted 1 line
drivers/platform/x86/lenovo/wmi-capdata.c +1
-0+struct block {u32 nr;u32 data[]; } *block;This is the first time I see this style anywhere in the kernel's context, has there been some general discussion about this style somewhere?
At least it seems immediately obvious to me that this style will have a negative impact on documentability due to (too) concise use of space.
Make sense. Will break it into multiple lines. Thanks.
Quoted 14 lines
Quoted 14 lines
drivers/platform/x86/lenovo/wmi-capdata.c +14
-0+struct cd_list *list; +size_t size; +int idx; + + ret_obj =wmidev_block_query (priv->wdev,0 ); +if (!ret_obj) +return -ENODEV ; + +/* +* This is usually caused by a dummy ACPI method. Do not return an error +* as failing to probe this device will result in master driver being +* unbound - this behavior aligns with lwmi_cd_cache(). +*/ +if (ret_obj->type !=ACPI_TYPE_BUFFER ) {Quoted 8 lines
drivers/platform/x86/lenovo/wmi-capdata.c static int lwmi_cd_cache(struct lwmi_cd_priv *priv) · line 291
Quoted 6 lines
drivers/platform/x86/lenovo/wmi-capdata.c +6
-0+ count =0 ; + goto alloc; + } + + size = ret_obj->buffer.length; + block = (struct block *)ret_obj->buffer.pointer;void * can be cast implicitly.
Quoted 1 line
ret_obj->buffer.pointer' is au8 *' pointer so the cast is mandatory.
Ah, right. I think I even tried to check it but probably picked up the void *pointer from struct acpi_buffer instead of the correct one.
Quoted 2 lines
Hmmm, this reminds me that
struct block' probably needs a__packed' to generate unaligned access to it.
In all u32 struct, I don't think __packed is required. You can use pahole tool to check the layout if you want, but I don't think compiler adds any gaps with only u32s.
Signature · 1 line
i.
Re: [PATCH v6 5/7] platform/x86: lenovo-wmi-capdata: Add support for Fan Test Data
Hi Ilpo,
Quoted 200 lines · Ilpo Järvinen
Quoted 194 lines · Rong Zhang
Quoted 140 lines · Ilpo Järvinen
Quoted 138 lines · Rong Zhang
Add support for
LENOVO_FAN_TEST_DATAWMI data block. Provides an interface for querying the min/max fan speed RPM (reference data) of a given fan ID.This interface is optional. Hence, it does not bind to lenovo-wmi-other and is not registered as a component for the moment. Appropriate binding will be implemented in the subsequent patch.
Signed-off-by Rong Zhang <[email protected]>Reviewed-by Derek J. Clark <[email protected]>Tested-by Derek J. Clark <[email protected]>---
Changes in v4:
- Rebase on top of changes made to [PATCH v4 3/7]
- Do not register it as a component until [PATCH v4 6/7]Changes in v2:
- Reword documentation--- .../wmi/devices/lenovo-wmi-other.rst | 17 +++ drivers/platform/x86/lenovo/wmi-capdata.c | 102 ++++++++++++++++++ drivers/platform/x86/lenovo/wmi-capdata.h | 7 ++ 3 files changed, 126 insertions(+)Documentation/wmi/devices/lenovo-wmi-other.rst +17
-0@@ -62,6 +62,13 @@ The following firmware-attributes are implemented: - ppt_pl2_sppt: Platform Profile Tracking Slow Package Power Tracking - ppt_pl3_fppt: Platform Profile Tracking Fast Package Power Tracking +LENOVO_FAN_TEST_DATA +------------------------- + +WMI GUID ``B642801B-3D21-45DE-90AE-6E86F164FB21`` + +The LENOVO_FAN_TEST_DATA interface provides reference data for self-test of +cooling fans. WMI interface description =========================@@ -115,3 +122,13 @@ data using the `bmfdec <https://github.com/pali/bmfdec>`_ utility: [WmiDataId(3), read, Description("Data Size.")] uint32 DataSize; [WmiDataId(4), read, Description("Default Value"), WmiSizeIs("DataSize")] uint8 DefaultValue[]; }; + + [WMI, Dynamic, Provider("WmiProv"), Locale("MS\\0x409"), Description("Definition of Fan Test Data"), guid("{B642801B-3D21-45DE-90AE-6E86F164FB21}")] + class LENOVO_FAN_TEST_DATA { + [key, read] string InstanceName; + [read] boolean Active; + [WmiDataId(1), read, Description("Mode.")] uint32 NumOfFans; + [WmiDataId(2), read, Description("Fan ID."), WmiSizeIs("NumOfFans")] uint32 FanId[]; + [WmiDataId(3), read, Description("Maximum Fan Speed."), WmiSizeIs("NumOfFans")] uint32 FanMaxSpeed[]; + [WmiDataId(4), read, Description("Minumum Fan Speed."), WmiSizeIs("NumOfFans")] uint32 FanMinSpeed[]; + };drivers/platform/x86/lenovo/wmi-capdata.c +18
-0@@ -13,6 +13,10 @@* attribute has multiple pages, one for each of the thermal modes managed by * the Gamezone interface. * +* Fan Test Data includes the max/min fan speed RPM for each fan. This is +* reference data for self-test. If the fan is in good condition, it is capable +* to spin faster than max RPM or slower than min RPM. +* * Copyright (C) 2025 Derek J. Clark <[email protected]> * - Initial implementation (formerly named lenovo-wmi-capdata01) * @@ -41,6 +45,7 @@#define LENOVO_CAPABILITY_DATA_00_GUID "362A3AFE-3D96-4665-8530-96DAD5BB300E"#define LENOVO_CAPABILITY_DATA_01_GUID "7A8F5407-CB67-4D6E-B547-39B3BE018154" +#define LENOVO_FAN_TEST_DATA_GUID "B642801B-3D21-45DE-90AE-6E86F164FB21"#define ACPI_AC_CLASS "ac_adapter"#define ACPI_AC_NOTIFY_STATUS 0x80@@ -48,6 +53,7 @@enum lwmi_cd_type {LENOVO_CAPABILITY_DATA_00 ,LENOVO_CAPABILITY_DATA_01 , +LENOVO_FAN_TEST_DATA , };#define LWMI_CD_TABLE_ITEM (_type) \@@ -62,6 +68,7 @@ static const struct lwmi_cd_info { } lwmi_cd_table[] = {LWMI_CD_TABLE_ITEM (LENOVO_CAPABILITY_DATA_00 ),LWMI_CD_TABLE_ITEM (LENOVO_CAPABILITY_DATA_01 ), + LWMI_CD_TABLE_ITEM(LENOVO_FAN_TEST_DATA), }; struct lwmi_cd_priv {@@ -78,6 +85,7 @@ struct cd_list {union { DECLARE_FLEX_ARRAY(struct capdata00, cd00); DECLARE_FLEX_ARRAY(struct capdata01, cd01); + DECLARE_FLEX_ARRAY(struct capdata_fan, cd_fan); }; };@@ -117,6 +125,10 @@ void lwmi_cd_match_add_all(struct device *master, struct component_match **matchreturn ;for (i =0 ; i <ARRAY_SIZE (lwmi_cd_table); i++) { +/* Skip optional interfaces. */ +if (lwmi_cd_table[i].type ==LENOVO_FAN_TEST_DATA ) +continue ; +component_match_add (master, matchptr, lwmi_cd_match, (void *)&lwmi_cd_table[i].type);if (IS_ERR (*matchptr))@@ -194,6 +206,9 @@ EXPORT_SYMBOL_NS_GPL(lwmi_cd00_get_data, "LENOVO_WMI_CD"); DEF_LWMI_CDXX_GET_DATA(cd01, LENOVO_CAPABILITY_DATA_01, struct capdata01);EXPORT_SYMBOL_NS_GPL (lwmi_cd01_get_data,"LENOVO_WMI_CD" ); +DEF_LWMI_CDXX_GET_DATA(cd_fan, LENOVO_FAN_TEST_DATA, struct capdata_fan); +EXPORT_SYMBOL_NS_GPL (lwmi_cd_fan_get_data,"LENOVO_WMI_CD" ); +/** * lwmi_cd_cache() - Cache all WMI data block information * @priv: lenovo-wmi-capdata driver data. @@ -217,6 +232,9 @@ static int lwmi_cd_cache(struct lwmi_cd_priv *priv) p = &priv->list->cd01[0 ]; size =sizeof (priv->list->cd01[0 ]);break ; +case LENOVO_FAN_TEST_DATA : +/* Done by lwmi_cd_alloc() => lwmi_cd_fan_list_alloc_cache(). */ +return 0 ;default :return -EINVAL ; }@@ -239,6 +257,78 @@ static int lwmi_cd_cache(struct lwmi_cd_priv *priv)return 0 ; }Quoted 16 lines
drivers/platform/x86/lenovo/wmi-capdata.c static int lwmi_cd_cache(struct lwmi_cd_priv *priv) · line 270
Quoted 11 lines
drivers/platform/x86/lenovo/wmi-capdata.c +11
-0+/** +* lwmi_cd_fan_list_alloc_cache() - Alloc and cache Fan Test Data list +* @priv: lenovo-wmi-capdata driver data. +* @listptr: Pointer to returned cd_list pointer. +* +* Return: count of fans found, or an error. +*/ +static int lwmi_cd_fan_list_alloc_cache (struct lwmi_cd_priv *priv,struct cd_list **listptr) +{ +u32 count, *fan_ids, *fan_min_rpms, *fan_max_rpms; + union acpi_object *ret_obj __free(kfree) = NULL;Since you're using
__free(), please move this to where you assign the value. This is to create a pattern with cleanup helpers. The cleanup order depends on the order the variables are introduced which in some other cases may be significant.Make sense. Will move it to the last declaration lines with its assignment. Thanks.
Quoted 7 lines
drivers/platform/x86/lenovo/wmi-capdata.c static int lwmi_cd_cache(struct lwmi_cd_priv *priv) · line 271
Quoted 1 line
drivers/platform/x86/lenovo/wmi-capdata.c +1
-0+struct block {u32 nr;u32 data[]; } *block;This is the first time I see this style anywhere in the kernel's context, has there been some general discussion about this style somewhere?
At least it seems immediately obvious to me that this style will have a negative impact on documentability due to (too) concise use of space.
Make sense. Will break it into multiple lines. Thanks.
Quoted 14 lines
Quoted 14 lines
drivers/platform/x86/lenovo/wmi-capdata.c +14
-0+struct cd_list *list; +size_t size; +int idx; + + ret_obj =wmidev_block_query (priv->wdev,0 ); +if (!ret_obj) +return -ENODEV ; + +/* +* This is usually caused by a dummy ACPI method. Do not return an error +* as failing to probe this device will result in master driver being +* unbound - this behavior aligns with lwmi_cd_cache(). +*/ +if (ret_obj->type !=ACPI_TYPE_BUFFER ) {Quoted 8 lines
drivers/platform/x86/lenovo/wmi-capdata.c static int lwmi_cd_cache(struct lwmi_cd_priv *priv) · line 291
Quoted 6 lines
drivers/platform/x86/lenovo/wmi-capdata.c +6
-0+ count =0 ; + goto alloc; + } + + size = ret_obj->buffer.length; + block = (struct block *)ret_obj->buffer.pointer;void * can be cast implicitly.
Quoted 1 line
ret_obj->buffer.pointer' is au8 *' pointer so the cast is mandatory.Ah, right. I think I even tried to check it but probably picked up the void *pointer from struct
acpi_bufferinstead of the correct one.
Quoted 6 lines
Quoted 2 lines
Hmmm, this reminds me that
struct block' probably needs a__packed' to generate unaligned access to it.In all u32 struct, I don't think
__packedis required. You can use pahole tool to check the layout if you want, but I don't think compiler adds any gaps with only u32s.
__packed is not used to compact the structure layout here, but to tell the compiler to emit[1] unaligned access to the ACPI buffer. See also the change to [PATCH v3 1/6] suggested by Armin:
https://lore.kernel.org/r/[email protected]/
[1]: If CONFIG_UBSAN_ALIGNMENT=n, the assembly code should be the same on x86. Otherwise, __packed effectively suppresses the alignment check as unaligned access is expected.
Thanks,
Rong
PATCH v6 6/7 platform/x86: lenovo-wmi-capdata: Wire up Fan Test Data
In reply to Rong ZhangA capdata00 attribute (0x04050000) describes the presence of Fan Test Data. Query it, and bind Fan Test Data as a component of capdata00 accordingly. The component master of capdata00 may pass a callback while binding to retrieve fan info from Fan Test Data.
Summarizing this scheme:
lenovo-wmi-other <-> capdata00 <-> capdata_fan |- master |- component |- sub-master |- sub-component
The callback will be called once both the master and the sub-component are bound to the sub-master (component).
This scheme is essential to solve these issues:
- The component framework only supports one aggregation per master
- A binding is only established until all components are found
- The Fan Test Data interface may be missing on some devices
- To get rid of queries for the presense of WMI GUIDs
capdata00 is registered as a component and a sub-master on probe, instead of chaining the registerations in one's bind callback. This is because calling (un)registration methods of the component framework causes deadlock in (un)bind callbacks, i.e., it's impossible to register capdata00 as a sub-master/component in its component/sub-master bind callback, and vice versa.
---
Changes in v6:
- Fix the error path of component_add(capdata00)
- Elaborate the design in commit message
Changes in v5:
- Fix missing include (thanks kernel test robot)
Changes in v4:
- New patch in the series (thanks Armin Wolf's inspiration)
- Get rid of wmi_has_guid() (see also [PATCH v4 3/7])
--- drivers/platform/x86/lenovo/wmi-capdata.c | 265 +++++++++++++++++++++- drivers/platform/x86/lenovo/wmi-capdata.h | 20 ++ drivers/platform/x86/lenovo/wmi-other.c | 5 - 3 files changed, 283 insertions(+), 7 deletions(-)
drivers/platform/x86/lenovo/wmi-capdata.c +263 -2
@@ -27,6 +27,7 @@#define pr_fmt (fmt) KBUILD_MODNAME ": " fmt#include <linux/acpi.h> +#include <linux/bitfield.h> #include <linux/cleanup.h> #include <linux/component.h> #include <linux/container_of.h>
@@ -50,10 +51,17 @@#define ACPI_AC_CLASS "ac_adapter"#define ACPI_AC_NOTIFY_STATUS 0x80 +#define LWMI_FEATURE_ID_FAN_TEST 0x05 + +#define LWMI_ATTR_ID_FAN_TEST \ + (FIELD_PREP(LWMI_ATTR_DEV_ID_MASK, LWMI_DEVICE_ID_FAN) | \ + FIELD_PREP(LWMI_ATTR_FEAT_ID_MASK, LWMI_FEATURE_ID_FAN_TEST)) +enum lwmi_cd_type {LENOVO_CAPABILITY_DATA_00 ,LENOVO_CAPABILITY_DATA_01 ,LENOVO_FAN_TEST_DATA , +CD_TYPE_NONE =-1 , };#define LWMI_CD_TABLE_ITEM (_type) \
@@ -75,6 +83,20 @@ struct lwmi_cd_priv {struct notifier_block acpi_nb;/* ACPI events */ struct wmi_device *wdev;struct cd_list *list; + +/* +* A capdata device may be a component master of another capdata device. +* E.g., lenovo-wmi-other <-> capdata00 <-> capdata_fan +* |- master |- component +* |- sub-master +* |- sub-component +*/ +struct lwmi_cd_sub_master_priv { +struct device *master_dev; +cd_list_cb_t master_cb; +struct cd_list *sub_component_list;/* ERR_PTR(-ENODEV) implies no sub-component. */ +bool registered;/* Has the sub-master been registered? */ + } *sub_master; };struct cd_list {
@@ -125,7 +147,7 @@ void lwmi_cd_match_add_all(struct device *master, struct component_match **matchreturn ;for (i =0 ; i <ARRAY_SIZE (lwmi_cd_table); i++) { -/* Skip optional interfaces. */ +/* Skip sub-components. */ if (lwmi_cd_table[i].type ==LENOVO_FAN_TEST_DATA )continue ;
@@ -137,6 +159,56 @@ void lwmi_cd_match_add_all(struct device *master, struct component_match **match }EXPORT_SYMBOL_NS_GPL (lwmi_cd_match_add_all,"LENOVO_WMI_CD" ); +/** +* lwmi_cd_call_master_cb() - Call the master callback for the sub-component. +* @priv: Pointer to the capability data private data. +* +* Call the master callback and pass the sub-component list to it if the +* dependency chain (master <-> sub-master <-> sub-component) is complete. +*/ +static void lwmi_cd_call_master_cb (struct lwmi_cd_priv *priv) +{ +struct cd_list *sub_component_list = priv->sub_master->sub_component_list; + +/* +* Call the callback only if the dependency chain is ready: +* - Binding between master and sub-master: fills master_dev and master_cb +* - Binding between sub-master and sub-component: fills sub_component_list +* +* If a binding has been unbound before the other binding is bound, the +* corresponding members filled by the former are guaranteed to be cleared. +* +* This function is only called in bind callbacks, and the component +* framework guarantees bind/unbind callbacks may never execute +* simultaneously, which implies that it's impossible to have a race +* condition. +* +* Hence, this check is sufficient to ensure that the callback is called +* at most once and with the correct state, without relying on a specific +* sequence of binding establishment. +*/ +if (!sub_component_list || + !priv->sub_master->master_dev || + !priv->sub_master->master_cb) +return ; + +if (PTR_ERR (sub_component_list) == -ENODEV ) + sub_component_list =NULL ; +else if (WARN_ON (IS_ERR (sub_component_list))) +return ; + + priv->sub_master->master_cb (priv->sub_master->master_dev, + sub_component_list); + +/* +* Prevent "unbind and rebind" sequences from userspace from calling the +* callback twice. +*/ + priv->sub_master->master_cb =NULL ; + priv->sub_master->master_dev =NULL ; + priv->sub_master->sub_component_list =NULL ; +} +/** * lwmi_cd_component_bind() - Bind component to master device. * @cd_dev: Pointer to the lenovo-wmi-capdata driver parent device.
@@ -147,6 +219,8 @@ EXPORT_SYMBOL_NS_GPL(lwmi_cd_match_add_all, "LENOVO_WMI_CD");* list. This is used to call lwmi_cd*_get_data to look up attribute data * from the lenovo-wmi-other driver. * +* If cd_dev is a sub-master, try to call the master callback. +* * Return: 0 */ static int lwmi_cd_component_bind(struct device *cd_dev,
@@ -158,6 +232,11 @@ static int lwmi_cd_component_bind(struct device *cd_dev,switch (priv->list->type) {case LENOVO_CAPABILITY_DATA_00 : binder->cd00_list = priv->list; + + priv->sub_master->master_dev = om_dev; + priv->sub_master->master_cb = binder->cd_fan_list_cb; +lwmi_cd_call_master_cb (priv); +break ;case LENOVO_CAPABILITY_DATA_01 : binder->cd01_list = priv->list;
@@ -169,8 +248,167 @@ static int lwmi_cd_component_bind(struct device *cd_dev,return 0 ; } +/** +* lwmi_cd_component_unbind() - Unbind component to master device. +* @cd_dev: Pointer to the lenovo-wmi-capdata driver parent device. +* @om_dev: Pointer to the lenovo-wmi-other driver parent device. +* @data: Unused. +* +* If cd_dev is a sub-master, clear the collected data from the master device to +* prevent the binding establishment between the sub-master and the sub- +* component (if it's about to happen) from calling the master callback. +*/ +static void lwmi_cd_component_unbind (struct device *cd_dev, +struct device *om_dev,void *data) +{ +struct lwmi_cd_priv *priv =dev_get_drvdata (cd_dev); + +switch (priv->list->type) { +case LENOVO_CAPABILITY_DATA_00 : + priv->sub_master->master_dev =NULL ; + priv->sub_master->master_cb =NULL ; +return ; +default : +return ; + } +} +static const struct component_ops lwmi_cd_component_ops = { .bind = lwmi_cd_component_bind, + .unbind = lwmi_cd_component_unbind, +}; + +/** +* lwmi_cd_sub_master_bind() - Bind sub-component of sub-master device +* @dev: The sub-master capdata basic device. +* +* Call component_bind_all to bind the sub-component device to the sub-master +* device. On success, collect the pointer to the sub-component list and try +* to call the master callback. +* +* Return: 0 on success, or an error code. +*/ +static int lwmi_cd_sub_master_bind (struct device *dev) +{ +struct lwmi_cd_priv *priv =dev_get_drvdata (dev); +struct cd_list *sub_component_list; +int ret; + + ret =component_bind_all (dev, &sub_component_list); +if (ret) +return ret; + + priv->sub_master->sub_component_list = sub_component_list; +lwmi_cd_call_master_cb (priv); + +return 0 ; +} + +/** +* lwmi_cd_sub_master_unbind() - Unbind sub-component of sub-master device +* @dev: The sub-master capdata basic device +* +* Clear the collected pointer to the sub-component list to prevent the binding +* establishment between the sub-master and the sub-component (if it's about to +* happen) from calling the master callback. Then, call component_unbind_all to +* unbind the sub-component device from the sub-master device. +*/ +static void lwmi_cd_sub_master_unbind (struct device *dev) +{ +struct lwmi_cd_priv *priv =dev_get_drvdata (dev); + + priv->sub_master->sub_component_list =NULL ; + +component_unbind_all (dev,NULL ); +} + +static const struct component_master_ops lwmi_cd_sub_master_ops = { + .bind = lwmi_cd_sub_master_bind, + .unbind = lwmi_cd_sub_master_unbind, +}; + +/** +* lwmi_cd_sub_master_add() - Register a sub-master with its sub-component +* @priv: Pointer to the sub-master capdata device private data. +* @sub_component_type: Type of the sub-component. +* +* Match the sub-component type and register the current capdata device as a +* sub-master. If the given sub-component type is CD_TYPE_NONE, mark the sub- +* component as non-existent without registering sub-master. +* +* Return: 0 on success, or an error code. +*/ +static int lwmi_cd_sub_master_add (struct lwmi_cd_priv *priv, +enum lwmi_cd_type sub_component_type) +{ +struct component_match *master_match =NULL ; +int ret; + + priv->sub_master =devm_kzalloc (&priv->wdev->dev,sizeof (*priv->sub_master),GFP_KERNEL ); +if (!priv->sub_master) +return -ENOMEM ; + +if (sub_component_type ==CD_TYPE_NONE ) { +/* The master callback will be called with NULL on bind. */ + priv->sub_master->sub_component_list =ERR_PTR (-ENODEV ); + priv->sub_master->registered = false; +return 0 ; + } + +/* +* lwmi_cd_match() needs a pointer to enum lwmi_cd_type, but on-stack +* data cannot be used here. Steal one from lwmi_cd_table. +*/ +component_match_add (&priv->wdev->dev, &master_match, lwmi_cd_match, + (void *)&lwmi_cd_table[sub_component_type].type); +if (IS_ERR (master_match)) +return PTR_ERR (master_match); + + ret =component_master_add_with_match (&priv->wdev->dev, &lwmi_cd_sub_master_ops, + master_match); +if (ret) +return ret; + + priv->sub_master->registered = true; +return 0 ; +} + +/** +* lwmi_cd_sub_master_del() - Unregister a sub-master if it's registered +* @priv: Pointer to the sub-master capdata device private data. +*/ +static void lwmi_cd_sub_master_del (struct lwmi_cd_priv *priv) +{ +if (priv->sub_master->registered) { +component_master_del (&priv->wdev->dev, &lwmi_cd_sub_master_ops); + priv->sub_master->registered = false; + } +} + +/** +* lwmi_cd_sub_component_bind() - Bind sub-component to sub-master device. +* @sc_dev: Pointer to the sub-component capdata parent device. +* @sm_dev: Pointer to the sub-master capdata parent device. +* @data: Pointer used to return the capability data list pointer. +* +* On sub-master's bind, provide a pointer to the local capdata list. +* This is used by the sub-master to call the master callback. +* +* Return: 0 +*/ +static int lwmi_cd_sub_component_bind (struct device *sc_dev, +struct device *sm_dev,void *data) +{ +struct lwmi_cd_priv *priv =dev_get_drvdata (sc_dev); +struct cd_list **listp = data; + + *listp = priv->list; + +return 0 ; +} + +static const struct component_ops lwmi_cd_sub_component_ops = { + .bind = lwmi_cd_sub_component_bind, };/**
@@ -470,9 +708,28 @@ static int lwmi_cd_probe(struct wmi_device *wdev, const void *context) goto out;switch (info->type) { -case LENOVO_CAPABILITY_DATA_00 : +case LENOVO_CAPABILITY_DATA_00 : { +enum lwmi_cd_type sub_component_type =LENOVO_FAN_TEST_DATA ; +struct capdata00 capdata00; + + ret =lwmi_cd00_get_data (priv->list,LWMI_ATTR_ID_FAN_TEST , &capdata00); +if (ret || !(capdata00.supported &LWMI_SUPP_VALID )) { +dev_dbg (&wdev->dev,"capdata00 declares no fan test support\n" ); + sub_component_type =CD_TYPE_NONE ; + } + +/* Sub-master (capdata00) <-> sub-component (capdata_fan) */ + ret =lwmi_cd_sub_master_add (priv, sub_component_type); +if (ret) + goto out; + +/* Master (lenovo-wmi-other) <-> sub-master (capdata00) */ ret =component_add (&wdev->dev, &lwmi_cd_component_ops); +if (ret) +lwmi_cd_sub_master_del (priv); + goto out; + }case LENOVO_CAPABILITY_DATA_01 : priv->acpi_nb.notifier_call = lwmi_cd01_notifier_call;
@@ -488,6 +745,7 @@ static int lwmi_cd_probe(struct wmi_device *wdev, const void *context) ret =component_add (&wdev->dev, &lwmi_cd_component_ops); goto out;case LENOVO_FAN_TEST_DATA : + ret =component_add (&wdev->dev, &lwmi_cd_sub_component_ops); goto out;default :return -EINVAL ;
@@ -509,10 +767,13 @@ static void lwmi_cd_remove(struct wmi_device *wdev)switch (priv->list->type) {case LENOVO_CAPABILITY_DATA_00 : +lwmi_cd_sub_master_del (priv); + fallthrough;case LENOVO_CAPABILITY_DATA_01 :component_del (&wdev->dev, &lwmi_cd_component_ops);break ;case LENOVO_FAN_TEST_DATA : +component_del (&wdev->dev, &lwmi_cd_sub_component_ops);break ;default :WARN_ON (1 );
drivers/platform/x86/lenovo/wmi-capdata.h +20 -0
@@ -5,8 +5,20 @@#ifndef _LENOVO_WMI_CAPDATA_H_#define _LENOVO_WMI_CAPDATA_H_ +#include <linux/bits.h> #include <linux/types.h> +#define LWMI_SUPP_VALID BIT(0) +#define LWMI_SUPP_MAY_GET (LWMI_SUPP_VALID | BIT(1)) +#define LWMI_SUPP_MAY_SET (LWMI_SUPP_VALID | BIT(2)) + +#define LWMI_ATTR_DEV_ID_MASK GENMASK(31, 24) +#define LWMI_ATTR_FEAT_ID_MASK GENMASK(23, 16) +#define LWMI_ATTR_MODE_ID_MASK GENMASK(15, 8) +#define LWMI_ATTR_TYPE_ID_MASK GENMASK(7, 0) + +#define LWMI_DEVICE_ID_FAN 0x04 +struct component_match ;struct device ;struct cd_list ;
@@ -32,9 +44,17 @@ struct capdata_fan {u32 max_rpm; }; +typedef void (*cd_list_cb_t )(struct device *master_dev,struct cd_list *cd_list); +struct lwmi_cd_binder {struct cd_list *cd00_list;struct cd_list *cd01_list; +/* +* May be called during or after the bind callback. +* Will be called with NULL if capdata_fan does not exist. +* The pointer is only valid in the callback; never keep it for later use! +*/ +cd_list_cb_t cd_fan_list_cb; };void lwmi_cd_match_add_all (struct device *master,struct component_match **matchptr);
drivers/platform/x86/lenovo/wmi-other.c +0 -5
@@ -54,11 +54,6 @@#define LWMI_FEATURE_VALUE_GET 17#define LWMI_FEATURE_VALUE_SET 18 -#define LWMI_ATTR_DEV_ID_MASK GENMASK(31, 24) -#define LWMI_ATTR_FEAT_ID_MASK GENMASK(23, 16) -#define LWMI_ATTR_MODE_ID_MASK GENMASK(15, 8) -#define LWMI_ATTR_TYPE_ID_MASK GENMASK(7, 0) -#define LWMI_OM_FW_ATTR_BASE_PATH "lenovo-wmi-other"static BLOCKING_NOTIFIER_HEAD (om_chain_head);
Signature · 1 line
2.51.0
Armin Wolf
maintainerRe: [PATCH v6 6/7] platform/x86: lenovo-wmi-capdata: Wire up Fan Test Data
Am 22.11.25 um 19:44 schrieb Rong Zhang:
Quoted 21 lines
A capdata00 attribute (
0x04050000) describes the presence of Fan Test Data. Query it, and bind Fan Test Data as a component of capdata00 accordingly. The component master of capdata00 may pass a callback while binding to retrieve fan info from Fan Test Data.Summarizing this scheme:
lenovo-wmi-other <-> capdata00 <-> capdata_fan |- master |- component |- sub-master |- sub-componentThe callback will be called once both the master and the sub-component are bound to the sub-master (component).
This scheme is essential to solve these issues:
- The component framework only supports one aggregation per master
- A binding is only established until all components are found
- The Fan Test Data interface may be missing on some devices
- To get rid of queries for the presense of WMI GUIDs
Quoted 6 lines
capdata00 is registered as a component and a sub-master on probe, instead of chaining the registerations in one's bind callback. This is because calling (un)registration methods of the component framework causes deadlock in (un)bind callbacks, i.e., it's impossible to register capdata00 as a sub-master/component in its component/sub-master bind callback, and vice versa.
I spend some time trying to understand all of this, and i have come to the conclusion that while passing a callback between both component masters, it still is not exactly clean.
Can you instead use devm_lwmi_om_register_notifier() and define another event for querying the fan data? This way we could ditch the component submaster with all of the callback madness. Sorry for being the one for suggesting the submaster approach in the first place, i did not know that the component framework is so limited when it comes to nested component masters :/
If Mark is OK with using the submaster approach then you can ignore the above suggestion.
Thanks,
Armin Wolf
Quoted 435 lines
Signed-off-by Rong Zhang <[email protected]>---
Changes in v6:
- Fix the error path ofcomponent_add(capdata00)
- Elaborate the design in commit messageChanges in v5:
- Fix missing include (thanks kernel test robot)Changes in v4:
- New patch in the series (thanks Armin Wolf's inspiration)
- Get rid ofwmi_has_guid()(see also [PATCH v4 3/7])--- drivers/platform/x86/lenovo/wmi-capdata.c | 265 +++++++++++++++++++++- drivers/platform/x86/lenovo/wmi-capdata.h | 20 ++ drivers/platform/x86/lenovo/wmi-other.c | 5 - 3 files changed, 283 insertions(+), 7 deletions(-)drivers/platform/x86/lenovo/wmi-capdata.c +263
-2@@ -27,6 +27,7 @@#define pr_fmt (fmt) KBUILD_MODNAME ": " fmt#include <linux/acpi.h> +#include <linux/bitfield.h> #include <linux/cleanup.h> #include <linux/component.h> #include <linux/container_of.h> @@ -50,10 +51,17 @@#define ACPI_AC_CLASS "ac_adapter"#define ACPI_AC_NOTIFY_STATUS 0x80 +#define LWMI_FEATURE_ID_FAN_TEST 0x05 + +#define LWMI_ATTR_ID_FAN_TEST \ + (FIELD_PREP(LWMI_ATTR_DEV_ID_MASK, LWMI_DEVICE_ID_FAN) | \ + FIELD_PREP(LWMI_ATTR_FEAT_ID_MASK, LWMI_FEATURE_ID_FAN_TEST)) +enum lwmi_cd_type {LENOVO_CAPABILITY_DATA_00 ,LENOVO_CAPABILITY_DATA_01 ,LENOVO_FAN_TEST_DATA , +CD_TYPE_NONE =-1 , };#define LWMI_CD_TABLE_ITEM (_type) \@@ -75,6 +83,20 @@ struct lwmi_cd_priv {struct notifier_block acpi_nb;/* ACPI events */ struct wmi_device *wdev;struct cd_list *list; + +/* +* A capdata device may be a component master of another capdata device. +* E.g., lenovo-wmi-other <-> capdata00 <-> capdata_fan +* |- master |- component +* |- sub-master +* |- sub-component +*/ +struct lwmi_cd_sub_master_priv { +struct device *master_dev; +cd_list_cb_t master_cb; +struct cd_list *sub_component_list;/* ERR_PTR(-ENODEV) implies no sub-component. */ +bool registered;/* Has the sub-master been registered? */ + } *sub_master; };struct cd_list {@@ -125,7 +147,7 @@ void lwmi_cd_match_add_all(struct device *master, struct component_match **matchreturn ;for (i =0 ; i <ARRAY_SIZE (lwmi_cd_table); i++) { -/* Skip optional interfaces. */ +/* Skip sub-components. */ if (lwmi_cd_table[i].type ==LENOVO_FAN_TEST_DATA )continue ;@@ -137,6 +159,56 @@ void lwmi_cd_match_add_all(struct device *master, struct component_match **match }EXPORT_SYMBOL_NS_GPL (lwmi_cd_match_add_all,"LENOVO_WMI_CD" ); +/** +* lwmi_cd_call_master_cb() - Call the master callback for the sub-component. +* @priv: Pointer to the capability data private data. +* +* Call the master callback and pass the sub-component list to it if the +* dependency chain (master <-> sub-master <-> sub-component) is complete. +*/ +static void lwmi_cd_call_master_cb (struct lwmi_cd_priv *priv) +{ +struct cd_list *sub_component_list = priv->sub_master->sub_component_list; + +/* +* Call the callback only if the dependency chain is ready: +* - Binding between master and sub-master: fills master_dev and master_cb +* - Binding between sub-master and sub-component: fills sub_component_list +* +* If a binding has been unbound before the other binding is bound, the +* corresponding members filled by the former are guaranteed to be cleared. +* +* This function is only called in bind callbacks, and the component +* framework guarantees bind/unbind callbacks may never execute +* simultaneously, which implies that it's impossible to have a race +* condition. +* +* Hence, this check is sufficient to ensure that the callback is called +* at most once and with the correct state, without relying on a specific +* sequence of binding establishment. +*/ +if (!sub_component_list || + !priv->sub_master->master_dev || + !priv->sub_master->master_cb) +return ; + +if (PTR_ERR (sub_component_list) == -ENODEV ) + sub_component_list =NULL ; +else if (WARN_ON (IS_ERR (sub_component_list))) +return ; + + priv->sub_master->master_cb (priv->sub_master->master_dev, + sub_component_list); + +/* +* Prevent "unbind and rebind" sequences from userspace from calling the +* callback twice. +*/ + priv->sub_master->master_cb =NULL ; + priv->sub_master->master_dev =NULL ; + priv->sub_master->sub_component_list =NULL ; +} +/** * lwmi_cd_component_bind() - Bind component to master device. * @cd_dev: Pointer to the lenovo-wmi-capdata driver parent device. @@ -147,6 +219,8 @@ EXPORT_SYMBOL_NS_GPL(lwmi_cd_match_add_all, "LENOVO_WMI_CD");* list. This is used to call lwmi_cd*_get_data to look up attribute data * from the lenovo-wmi-other driver. * +* If cd_dev is a sub-master, try to call the master callback. +* * Return: 0 */ static int lwmi_cd_component_bind(struct device *cd_dev,@@ -158,6 +232,11 @@ static int lwmi_cd_component_bind(struct device *cd_dev,switch (priv->list->type) {case LENOVO_CAPABILITY_DATA_00 : binder->cd00_list = priv->list; + + priv->sub_master->master_dev = om_dev; + priv->sub_master->master_cb = binder->cd_fan_list_cb; +lwmi_cd_call_master_cb (priv); +break ;case LENOVO_CAPABILITY_DATA_01 : binder->cd01_list = priv->list;@@ -169,8 +248,167 @@ static int lwmi_cd_component_bind(struct device *cd_dev,return 0 ; } +/** +* lwmi_cd_component_unbind() - Unbind component to master device. +* @cd_dev: Pointer to the lenovo-wmi-capdata driver parent device. +* @om_dev: Pointer to the lenovo-wmi-other driver parent device. +* @data: Unused. +* +* If cd_dev is a sub-master, clear the collected data from the master device to +* prevent the binding establishment between the sub-master and the sub- +* component (if it's about to happen) from calling the master callback. +*/ +static void lwmi_cd_component_unbind (struct device *cd_dev, +struct device *om_dev,void *data) +{ +struct lwmi_cd_priv *priv =dev_get_drvdata (cd_dev); + +switch (priv->list->type) { +case LENOVO_CAPABILITY_DATA_00 : + priv->sub_master->master_dev =NULL ; + priv->sub_master->master_cb =NULL ; +return ; +default : +return ; + } +} +static const struct component_ops lwmi_cd_component_ops = { .bind = lwmi_cd_component_bind, + .unbind = lwmi_cd_component_unbind, +}; + +/** +* lwmi_cd_sub_master_bind() - Bind sub-component of sub-master device +* @dev: The sub-master capdata basic device. +* +* Call component_bind_all to bind the sub-component device to the sub-master +* device. On success, collect the pointer to the sub-component list and try +* to call the master callback. +* +* Return: 0 on success, or an error code. +*/ +static int lwmi_cd_sub_master_bind (struct device *dev) +{ +struct lwmi_cd_priv *priv =dev_get_drvdata (dev); +struct cd_list *sub_component_list; +int ret; + + ret =component_bind_all (dev, &sub_component_list); +if (ret) +return ret; + + priv->sub_master->sub_component_list = sub_component_list; +lwmi_cd_call_master_cb (priv); + +return 0 ; +} + +/** +* lwmi_cd_sub_master_unbind() - Unbind sub-component of sub-master device +* @dev: The sub-master capdata basic device +* +* Clear the collected pointer to the sub-component list to prevent the binding +* establishment between the sub-master and the sub-component (if it's about to +* happen) from calling the master callback. Then, call component_unbind_all to +* unbind the sub-component device from the sub-master device. +*/ +static void lwmi_cd_sub_master_unbind (struct device *dev) +{ +struct lwmi_cd_priv *priv =dev_get_drvdata (dev); + + priv->sub_master->sub_component_list =NULL ; + +component_unbind_all (dev,NULL ); +} + +static const struct component_master_ops lwmi_cd_sub_master_ops = { + .bind = lwmi_cd_sub_master_bind, + .unbind = lwmi_cd_sub_master_unbind, +}; + +/** +* lwmi_cd_sub_master_add() - Register a sub-master with its sub-component +* @priv: Pointer to the sub-master capdata device private data. +* @sub_component_type: Type of the sub-component. +* +* Match the sub-component type and register the current capdata device as a +* sub-master. If the given sub-component type is CD_TYPE_NONE, mark the sub- +* component as non-existent without registering sub-master. +* +* Return: 0 on success, or an error code. +*/ +static int lwmi_cd_sub_master_add (struct lwmi_cd_priv *priv, +enum lwmi_cd_type sub_component_type) +{ +struct component_match *master_match =NULL ; +int ret; + + priv->sub_master =devm_kzalloc (&priv->wdev->dev,sizeof (*priv->sub_master),GFP_KERNEL ); +if (!priv->sub_master) +return -ENOMEM ; + +if (sub_component_type ==CD_TYPE_NONE ) { +/* The master callback will be called with NULL on bind. */ + priv->sub_master->sub_component_list =ERR_PTR (-ENODEV ); + priv->sub_master->registered = false; +return 0 ; + } + +/* +* lwmi_cd_match() needs a pointer to enum lwmi_cd_type, but on-stack +* data cannot be used here. Steal one from lwmi_cd_table. +*/ +component_match_add (&priv->wdev->dev, &master_match, lwmi_cd_match, + (void *)&lwmi_cd_table[sub_component_type].type); +if (IS_ERR (master_match)) +return PTR_ERR (master_match); + + ret =component_master_add_with_match (&priv->wdev->dev, &lwmi_cd_sub_master_ops, + master_match); +if (ret) +return ret; + + priv->sub_master->registered = true; +return 0 ; +} + +/** +* lwmi_cd_sub_master_del() - Unregister a sub-master if it's registered +* @priv: Pointer to the sub-master capdata device private data. +*/ +static void lwmi_cd_sub_master_del (struct lwmi_cd_priv *priv) +{ +if (priv->sub_master->registered) { +component_master_del (&priv->wdev->dev, &lwmi_cd_sub_master_ops); + priv->sub_master->registered = false; + } +} + +/** +* lwmi_cd_sub_component_bind() - Bind sub-component to sub-master device. +* @sc_dev: Pointer to the sub-component capdata parent device. +* @sm_dev: Pointer to the sub-master capdata parent device. +* @data: Pointer used to return the capability data list pointer. +* +* On sub-master's bind, provide a pointer to the local capdata list. +* This is used by the sub-master to call the master callback. +* +* Return: 0 +*/ +static int lwmi_cd_sub_component_bind (struct device *sc_dev, +struct device *sm_dev,void *data) +{ +struct lwmi_cd_priv *priv =dev_get_drvdata (sc_dev); +struct cd_list **listp = data; + + *listp = priv->list; + +return 0 ; +} + +static const struct component_ops lwmi_cd_sub_component_ops = { + .bind = lwmi_cd_sub_component_bind, };/** @@ -470,9 +708,28 @@ static int lwmi_cd_probe(struct wmi_device *wdev, const void *context) goto out;switch (info->type) { -case LENOVO_CAPABILITY_DATA_00 : +case LENOVO_CAPABILITY_DATA_00 : { +enum lwmi_cd_type sub_component_type =LENOVO_FAN_TEST_DATA ; +struct capdata00 capdata00; + + ret =lwmi_cd00_get_data (priv->list,LWMI_ATTR_ID_FAN_TEST , &capdata00); +if (ret || !(capdata00.supported &LWMI_SUPP_VALID )) { +dev_dbg (&wdev->dev,"capdata00 declares no fan test support\n" ); + sub_component_type =CD_TYPE_NONE ; + } + +/* Sub-master (capdata00) <-> sub-component (capdata_fan) */ + ret =lwmi_cd_sub_master_add (priv, sub_component_type); +if (ret) + goto out; + +/* Master (lenovo-wmi-other) <-> sub-master (capdata00) */ ret =component_add (&wdev->dev, &lwmi_cd_component_ops); +if (ret) +lwmi_cd_sub_master_del (priv); + goto out; + }case LENOVO_CAPABILITY_DATA_01 : priv->acpi_nb.notifier_call = lwmi_cd01_notifier_call;@@ -488,6 +745,7 @@ static int lwmi_cd_probe(struct wmi_device *wdev, const void *context) ret =component_add (&wdev->dev, &lwmi_cd_component_ops); goto out;case LENOVO_FAN_TEST_DATA : + ret =component_add (&wdev->dev, &lwmi_cd_sub_component_ops); goto out;default :return -EINVAL ;@@ -509,10 +767,13 @@ static void lwmi_cd_remove(struct wmi_device *wdev)switch (priv->list->type) {case LENOVO_CAPABILITY_DATA_00 : +lwmi_cd_sub_master_del (priv); + fallthrough;case LENOVO_CAPABILITY_DATA_01 :component_del (&wdev->dev, &lwmi_cd_component_ops);break ;case LENOVO_FAN_TEST_DATA : +component_del (&wdev->dev, &lwmi_cd_sub_component_ops);break ;default :WARN_ON (1 );drivers/platform/x86/lenovo/wmi-capdata.h +20
-0@@ -5,8 +5,20 @@#ifndef _LENOVO_WMI_CAPDATA_H_#define _LENOVO_WMI_CAPDATA_H_ +#include <linux/bits.h> #include <linux/types.h> +#define LWMI_SUPP_VALID BIT(0) +#define LWMI_SUPP_MAY_GET (LWMI_SUPP_VALID | BIT(1)) +#define LWMI_SUPP_MAY_SET (LWMI_SUPP_VALID | BIT(2)) + +#define LWMI_ATTR_DEV_ID_MASK GENMASK(31, 24) +#define LWMI_ATTR_FEAT_ID_MASK GENMASK(23, 16) +#define LWMI_ATTR_MODE_ID_MASK GENMASK(15, 8) +#define LWMI_ATTR_TYPE_ID_MASK GENMASK(7, 0) + +#define LWMI_DEVICE_ID_FAN 0x04 +struct component_match ;struct device ;struct cd_list ;@@ -32,9 +44,17 @@ struct capdata_fan {u32 max_rpm; }; +typedef void (*cd_list_cb_t )(struct device *master_dev,struct cd_list *cd_list); +struct lwmi_cd_binder {struct cd_list *cd00_list;struct cd_list *cd01_list; +/* +* May be called during or after the bind callback. +* Will be called with NULL if capdata_fan does not exist. +* The pointer is only valid in the callback; never keep it for later use! +*/ +cd_list_cb_t cd_fan_list_cb; };void lwmi_cd_match_add_all (struct device *master,struct component_match **matchptr);drivers/platform/x86/lenovo/wmi-other.c +0
-5@@ -54,11 +54,6 @@#define LWMI_FEATURE_VALUE_GET 17#define LWMI_FEATURE_VALUE_SET 18 -#define LWMI_ATTR_DEV_ID_MASK GENMASK(31, 24) -#define LWMI_ATTR_FEAT_ID_MASK GENMASK(23, 16) -#define LWMI_ATTR_MODE_ID_MASK GENMASK(15, 8) -#define LWMI_ATTR_TYPE_ID_MASK GENMASK(7, 0) -#define LWMI_OM_FW_ATTR_BASE_PATH "lenovo-wmi-other"static BLOCKING_NOTIFIER_HEAD (om_chain_head);
Re: [PATCH v6 6/7] platform/x86: lenovo-wmi-capdata: Wire up Fan Test Data
Hi Armin,
Quoted 30 lines · Armin Wolf
Am 22.11.25 um 19:44 schrieb Rong Zhang:
Quoted 21 lines
A capdata00 attribute (
0x04050000) describes the presence of Fan Test Data. Query it, and bind Fan Test Data as a component of capdata00 accordingly. The component master of capdata00 may pass a callback while binding to retrieve fan info from Fan Test Data.Summarizing this scheme:
lenovo-wmi-other <-> capdata00 <-> capdata_fan |- master |- component |- sub-master |- sub-componentThe callback will be called once both the master and the sub-component are bound to the sub-master (component).
This scheme is essential to solve these issues:
- The component framework only supports one aggregation per master
- A binding is only established until all components are found
- The Fan Test Data interface may be missing on some devices
- To get rid of queries for the presense of WMI GUIDsQuoted 6 lines
capdata00 is registered as a component and a sub-master on probe, instead of chaining the registerations in one's bind callback. This is because calling (un)registration methods of the component framework causes deadlock in (un)bind callbacks, i.e., it's impossible to register capdata00 as a sub-master/component in its component/sub-master bind callback, and vice versa.
Quoted 3 lines
I spend some time trying to understand all of this, and i have come to the conclusion that while passing a callback between both component masters, it still is not exactly clean.
Could you elaborate? Thanks.
Quoted 2 lines
Can you instead use
devm_lwmi_om_register_notifier()and define another event for querying the fan data? This way we could ditch the component submaster with all of the callback madness.
Thanks for your review and suggestion.
At first I thought the notifier approach was nice, however...
There are two directions to use the notifier framework:
(1) lenovo-wmi-other calls blocking_notifier_call_chain() to query capdata_fan
(2) capdata_fan calls blocking_notifier_call_chain() to provide data to lenovo-wmi-other
Both requires some assumptions on probing/binding sequence:
(1) capdata_fan must be probed before lenovo-wmi-other calling blocking_notifier_call_chain(), otherwise lenovo-wmi-other will mistakenly believe capdata_fan is missing
(2) lenovo-wmi-other must be probed before capdata_fan calling blocking_notifier_call_chain(), otherwise lenovo-wmi-other will wait for fan info forever
So eventually we need *both directions* to break the assumptions on probing/binding sequence. Moreover, some extra synchronization primitives may be required to make sure the binding between lenovo-wmi- other and capdata00&01 won't be unbind while registering the HWMON device.
Quoted 2 lines
Sorry for being the one for suggesting the submaster approach in the first place, i did not know that the component framework is so limited when it comes to nested component masters :/
I'd say the sub-master approach is still the least ugly one.
The callback is always called in a bind callback. Hence, the component framework protects our sanity, so we don't need to worry about the other side of our component chain being messed up while handling one side. The approach doesn't need any assumption on binding sequence as the corresponding bind/unbind callbacks effectively create a state machine.
Quoted 4 lines
If Mark is OK with using the submaster approach then you can ignore the above suggestion.
Thanks,
Armin Wolf
Thanks,
Rong
Quoted 435 lines
Quoted 435 lines
Signed-off-by Rong Zhang <[email protected]>---
Changes in v6:
- Fix the error path ofcomponent_add(capdata00)
- Elaborate the design in commit messageChanges in v5:
- Fix missing include (thanks kernel test robot)Changes in v4:
- New patch in the series (thanks Armin Wolf's inspiration)
- Get rid ofwmi_has_guid()(see also [PATCH v4 3/7])--- drivers/platform/x86/lenovo/wmi-capdata.c | 265 +++++++++++++++++++++- drivers/platform/x86/lenovo/wmi-capdata.h | 20 ++ drivers/platform/x86/lenovo/wmi-other.c | 5 - 3 files changed, 283 insertions(+), 7 deletions(-)drivers/platform/x86/lenovo/wmi-capdata.c +263
-2@@ -27,6 +27,7 @@#define pr_fmt (fmt) KBUILD_MODNAME ": " fmt#include <linux/acpi.h> +#include <linux/bitfield.h> #include <linux/cleanup.h> #include <linux/component.h> #include <linux/container_of.h> @@ -50,10 +51,17 @@#define ACPI_AC_CLASS "ac_adapter"#define ACPI_AC_NOTIFY_STATUS 0x80 +#define LWMI_FEATURE_ID_FAN_TEST 0x05 + +#define LWMI_ATTR_ID_FAN_TEST \ + (FIELD_PREP(LWMI_ATTR_DEV_ID_MASK, LWMI_DEVICE_ID_FAN) | \ + FIELD_PREP(LWMI_ATTR_FEAT_ID_MASK, LWMI_FEATURE_ID_FAN_TEST)) +enum lwmi_cd_type {LENOVO_CAPABILITY_DATA_00 ,LENOVO_CAPABILITY_DATA_01 ,LENOVO_FAN_TEST_DATA , +CD_TYPE_NONE =-1 , };#define LWMI_CD_TABLE_ITEM (_type) \@@ -75,6 +83,20 @@ struct lwmi_cd_priv {struct notifier_block acpi_nb;/* ACPI events */ struct wmi_device *wdev;struct cd_list *list; + +/* +* A capdata device may be a component master of another capdata device. +* E.g., lenovo-wmi-other <-> capdata00 <-> capdata_fan +* |- master |- component +* |- sub-master +* |- sub-component +*/ +struct lwmi_cd_sub_master_priv { +struct device *master_dev; +cd_list_cb_t master_cb; +struct cd_list *sub_component_list;/* ERR_PTR(-ENODEV) implies no sub-component. */ +bool registered;/* Has the sub-master been registered? */ + } *sub_master; };struct cd_list {@@ -125,7 +147,7 @@ void lwmi_cd_match_add_all(struct device *master, struct component_match **matchreturn ;for (i =0 ; i <ARRAY_SIZE (lwmi_cd_table); i++) { -/* Skip optional interfaces. */ +/* Skip sub-components. */ if (lwmi_cd_table[i].type ==LENOVO_FAN_TEST_DATA )continue ;@@ -137,6 +159,56 @@ void lwmi_cd_match_add_all(struct device *master, struct component_match **match }EXPORT_SYMBOL_NS_GPL (lwmi_cd_match_add_all,"LENOVO_WMI_CD" ); +/** +* lwmi_cd_call_master_cb() - Call the master callback for the sub-component. +* @priv: Pointer to the capability data private data. +* +* Call the master callback and pass the sub-component list to it if the +* dependency chain (master <-> sub-master <-> sub-component) is complete. +*/ +static void lwmi_cd_call_master_cb (struct lwmi_cd_priv *priv) +{ +struct cd_list *sub_component_list = priv->sub_master->sub_component_list; + +/* +* Call the callback only if the dependency chain is ready: +* - Binding between master and sub-master: fills master_dev and master_cb +* - Binding between sub-master and sub-component: fills sub_component_list +* +* If a binding has been unbound before the other binding is bound, the +* corresponding members filled by the former are guaranteed to be cleared. +* +* This function is only called in bind callbacks, and the component +* framework guarantees bind/unbind callbacks may never execute +* simultaneously, which implies that it's impossible to have a race +* condition. +* +* Hence, this check is sufficient to ensure that the callback is called +* at most once and with the correct state, without relying on a specific +* sequence of binding establishment. +*/ +if (!sub_component_list || + !priv->sub_master->master_dev || + !priv->sub_master->master_cb) +return ; + +if (PTR_ERR (sub_component_list) == -ENODEV ) + sub_component_list =NULL ; +else if (WARN_ON (IS_ERR (sub_component_list))) +return ; + + priv->sub_master->master_cb (priv->sub_master->master_dev, + sub_component_list); + +/* +* Prevent "unbind and rebind" sequences from userspace from calling the +* callback twice. +*/ + priv->sub_master->master_cb =NULL ; + priv->sub_master->master_dev =NULL ; + priv->sub_master->sub_component_list =NULL ; +} +/** * lwmi_cd_component_bind() - Bind component to master device. * @cd_dev: Pointer to the lenovo-wmi-capdata driver parent device. @@ -147,6 +219,8 @@ EXPORT_SYMBOL_NS_GPL(lwmi_cd_match_add_all, "LENOVO_WMI_CD");* list. This is used to call lwmi_cd*_get_data to look up attribute data * from the lenovo-wmi-other driver. * +* If cd_dev is a sub-master, try to call the master callback. +* * Return: 0 */ static int lwmi_cd_component_bind(struct device *cd_dev,@@ -158,6 +232,11 @@ static int lwmi_cd_component_bind(struct device *cd_dev,switch (priv->list->type) {case LENOVO_CAPABILITY_DATA_00 : binder->cd00_list = priv->list; + + priv->sub_master->master_dev = om_dev; + priv->sub_master->master_cb = binder->cd_fan_list_cb; +lwmi_cd_call_master_cb (priv); +break ;case LENOVO_CAPABILITY_DATA_01 : binder->cd01_list = priv->list;@@ -169,8 +248,167 @@ static int lwmi_cd_component_bind(struct device *cd_dev,return 0 ; } +/** +* lwmi_cd_component_unbind() - Unbind component to master device. +* @cd_dev: Pointer to the lenovo-wmi-capdata driver parent device. +* @om_dev: Pointer to the lenovo-wmi-other driver parent device. +* @data: Unused. +* +* If cd_dev is a sub-master, clear the collected data from the master device to +* prevent the binding establishment between the sub-master and the sub- +* component (if it's about to happen) from calling the master callback. +*/ +static void lwmi_cd_component_unbind (struct device *cd_dev, +struct device *om_dev,void *data) +{ +struct lwmi_cd_priv *priv =dev_get_drvdata (cd_dev); + +switch (priv->list->type) { +case LENOVO_CAPABILITY_DATA_00 : + priv->sub_master->master_dev =NULL ; + priv->sub_master->master_cb =NULL ; +return ; +default : +return ; + } +} +static const struct component_ops lwmi_cd_component_ops = { .bind = lwmi_cd_component_bind, + .unbind = lwmi_cd_component_unbind, +}; + +/** +* lwmi_cd_sub_master_bind() - Bind sub-component of sub-master device +* @dev: The sub-master capdata basic device. +* +* Call component_bind_all to bind the sub-component device to the sub-master +* device. On success, collect the pointer to the sub-component list and try +* to call the master callback. +* +* Return: 0 on success, or an error code. +*/ +static int lwmi_cd_sub_master_bind (struct device *dev) +{ +struct lwmi_cd_priv *priv =dev_get_drvdata (dev); +struct cd_list *sub_component_list; +int ret; + + ret =component_bind_all (dev, &sub_component_list); +if (ret) +return ret; + + priv->sub_master->sub_component_list = sub_component_list; +lwmi_cd_call_master_cb (priv); + +return 0 ; +} + +/** +* lwmi_cd_sub_master_unbind() - Unbind sub-component of sub-master device +* @dev: The sub-master capdata basic device +* +* Clear the collected pointer to the sub-component list to prevent the binding +* establishment between the sub-master and the sub-component (if it's about to +* happen) from calling the master callback. Then, call component_unbind_all to +* unbind the sub-component device from the sub-master device. +*/ +static void lwmi_cd_sub_master_unbind (struct device *dev) +{ +struct lwmi_cd_priv *priv =dev_get_drvdata (dev); + + priv->sub_master->sub_component_list =NULL ; + +component_unbind_all (dev,NULL ); +} + +static const struct component_master_ops lwmi_cd_sub_master_ops = { + .bind = lwmi_cd_sub_master_bind, + .unbind = lwmi_cd_sub_master_unbind, +}; + +/** +* lwmi_cd_sub_master_add() - Register a sub-master with its sub-component +* @priv: Pointer to the sub-master capdata device private data. +* @sub_component_type: Type of the sub-component. +* +* Match the sub-component type and register the current capdata device as a +* sub-master. If the given sub-component type is CD_TYPE_NONE, mark the sub- +* component as non-existent without registering sub-master. +* +* Return: 0 on success, or an error code. +*/ +static int lwmi_cd_sub_master_add (struct lwmi_cd_priv *priv, +enum lwmi_cd_type sub_component_type) +{ +struct component_match *master_match =NULL ; +int ret; + + priv->sub_master =devm_kzalloc (&priv->wdev->dev,sizeof (*priv->sub_master),GFP_KERNEL ); +if (!priv->sub_master) +return -ENOMEM ; + +if (sub_component_type ==CD_TYPE_NONE ) { +/* The master callback will be called with NULL on bind. */ + priv->sub_master->sub_component_list =ERR_PTR (-ENODEV ); + priv->sub_master->registered = false; +return 0 ; + } + +/* +* lwmi_cd_match() needs a pointer to enum lwmi_cd_type, but on-stack +* data cannot be used here. Steal one from lwmi_cd_table. +*/ +component_match_add (&priv->wdev->dev, &master_match, lwmi_cd_match, + (void *)&lwmi_cd_table[sub_component_type].type); +if (IS_ERR (master_match)) +return PTR_ERR (master_match); + + ret =component_master_add_with_match (&priv->wdev->dev, &lwmi_cd_sub_master_ops, + master_match); +if (ret) +return ret; + + priv->sub_master->registered = true; +return 0 ; +} + +/** +* lwmi_cd_sub_master_del() - Unregister a sub-master if it's registered +* @priv: Pointer to the sub-master capdata device private data. +*/ +static void lwmi_cd_sub_master_del (struct lwmi_cd_priv *priv) +{ +if (priv->sub_master->registered) { +component_master_del (&priv->wdev->dev, &lwmi_cd_sub_master_ops); + priv->sub_master->registered = false; + } +} + +/** +* lwmi_cd_sub_component_bind() - Bind sub-component to sub-master device. +* @sc_dev: Pointer to the sub-component capdata parent device. +* @sm_dev: Pointer to the sub-master capdata parent device. +* @data: Pointer used to return the capability data list pointer. +* +* On sub-master's bind, provide a pointer to the local capdata list. +* This is used by the sub-master to call the master callback. +* +* Return: 0 +*/ +static int lwmi_cd_sub_component_bind (struct device *sc_dev, +struct device *sm_dev,void *data) +{ +struct lwmi_cd_priv *priv =dev_get_drvdata (sc_dev); +struct cd_list **listp = data; + + *listp = priv->list; + +return 0 ; +} + +static const struct component_ops lwmi_cd_sub_component_ops = { + .bind = lwmi_cd_sub_component_bind, };/** @@ -470,9 +708,28 @@ static int lwmi_cd_probe(struct wmi_device *wdev, const void *context) goto out;switch (info->type) { -case LENOVO_CAPABILITY_DATA_00 : +case LENOVO_CAPABILITY_DATA_00 : { +enum lwmi_cd_type sub_component_type =LENOVO_FAN_TEST_DATA ; +struct capdata00 capdata00; + + ret =lwmi_cd00_get_data (priv->list,LWMI_ATTR_ID_FAN_TEST , &capdata00); +if (ret || !(capdata00.supported &LWMI_SUPP_VALID )) { +dev_dbg (&wdev->dev,"capdata00 declares no fan test support\n" ); + sub_component_type =CD_TYPE_NONE ; + } + +/* Sub-master (capdata00) <-> sub-component (capdata_fan) */ + ret =lwmi_cd_sub_master_add (priv, sub_component_type); +if (ret) + goto out; + +/* Master (lenovo-wmi-other) <-> sub-master (capdata00) */ ret =component_add (&wdev->dev, &lwmi_cd_component_ops); +if (ret) +lwmi_cd_sub_master_del (priv); + goto out; + }case LENOVO_CAPABILITY_DATA_01 : priv->acpi_nb.notifier_call = lwmi_cd01_notifier_call;@@ -488,6 +745,7 @@ static int lwmi_cd_probe(struct wmi_device *wdev, const void *context) ret =component_add (&wdev->dev, &lwmi_cd_component_ops); goto out;case LENOVO_FAN_TEST_DATA : + ret =component_add (&wdev->dev, &lwmi_cd_sub_component_ops); goto out;default :return -EINVAL ;@@ -509,10 +767,13 @@ static void lwmi_cd_remove(struct wmi_device *wdev)switch (priv->list->type) {case LENOVO_CAPABILITY_DATA_00 : +lwmi_cd_sub_master_del (priv); + fallthrough;case LENOVO_CAPABILITY_DATA_01 :component_del (&wdev->dev, &lwmi_cd_component_ops);break ;case LENOVO_FAN_TEST_DATA : +component_del (&wdev->dev, &lwmi_cd_sub_component_ops);break ;default :WARN_ON (1 );drivers/platform/x86/lenovo/wmi-capdata.h +20
-0@@ -5,8 +5,20 @@#ifndef _LENOVO_WMI_CAPDATA_H_#define _LENOVO_WMI_CAPDATA_H_ +#include <linux/bits.h> #include <linux/types.h> +#define LWMI_SUPP_VALID BIT(0) +#define LWMI_SUPP_MAY_GET (LWMI_SUPP_VALID | BIT(1)) +#define LWMI_SUPP_MAY_SET (LWMI_SUPP_VALID | BIT(2)) + +#define LWMI_ATTR_DEV_ID_MASK GENMASK(31, 24) +#define LWMI_ATTR_FEAT_ID_MASK GENMASK(23, 16) +#define LWMI_ATTR_MODE_ID_MASK GENMASK(15, 8) +#define LWMI_ATTR_TYPE_ID_MASK GENMASK(7, 0) + +#define LWMI_DEVICE_ID_FAN 0x04 +struct component_match ;struct device ;struct cd_list ;@@ -32,9 +44,17 @@ struct capdata_fan {u32 max_rpm; }; +typedef void (*cd_list_cb_t )(struct device *master_dev,struct cd_list *cd_list); +struct lwmi_cd_binder {struct cd_list *cd00_list;struct cd_list *cd01_list; +/* +* May be called during or after the bind callback. +* Will be called with NULL if capdata_fan does not exist. +* The pointer is only valid in the callback; never keep it for later use! +*/ +cd_list_cb_t cd_fan_list_cb; };void lwmi_cd_match_add_all (struct device *master,struct component_match **matchptr);drivers/platform/x86/lenovo/wmi-other.c +0
-5@@ -54,11 +54,6 @@#define LWMI_FEATURE_VALUE_GET 17#define LWMI_FEATURE_VALUE_SET 18 -#define LWMI_ATTR_DEV_ID_MASK GENMASK(31, 24) -#define LWMI_ATTR_FEAT_ID_MASK GENMASK(23, 16) -#define LWMI_ATTR_MODE_ID_MASK GENMASK(15, 8) -#define LWMI_ATTR_TYPE_ID_MASK GENMASK(7, 0) -#define LWMI_OM_FW_ATTR_BASE_PATH "lenovo-wmi-other"static BLOCKING_NOTIFIER_HEAD (om_chain_head);
Armin Wolf
maintainerRe: [PATCH v6 6/7] platform/x86: lenovo-wmi-capdata: Wire up Fan Test Data
Am 23.11.25 um 16:02 schrieb Rong Zhang:
Quoted 65 lines
Hi Armin,
Quoted 29 lines · Armin Wolf
Am 22.11.25 um 19:44 schrieb Rong Zhang:
Quoted 21 lines
A capdata00 attribute (
0x04050000) describes the presence of Fan Test Data. Query it, and bind Fan Test Data as a component of capdata00 accordingly. The component master of capdata00 may pass a callback while binding to retrieve fan info from Fan Test Data.Summarizing this scheme:
lenovo-wmi-other <-> capdata00 <-> capdata_fan |- master |- component |- sub-master |- sub-componentThe callback will be called once both the master and the sub-component are bound to the sub-master (component).
This scheme is essential to solve these issues:
- The component framework only supports one aggregation per master
- A binding is only established until all components are found
- The Fan Test Data interface may be missing on some devices
- To get rid of queries for the presense of WMI GUIDsQuoted 6 lines
capdata00 is registered as a component and a sub-master on probe, instead of chaining the registerations in one's bind callback. This is because calling (un)registration methods of the component framework causes deadlock in (un)bind callbacks, i.e., it's impossible to register capdata00 as a sub-master/component in its component/sub-master bind callback, and vice versa.
Quoted 3 lines
I spend some time trying to understand all of this, and i have come to the conclusion that while passing a callback between both component masters, it still is not exactly clean.
Could you elaborate? Thanks.
Quoted 2 lines
Can you instead use
devm_lwmi_om_register_notifier()and define another event for querying the fan data? This way we could ditch the component submaster with all of the callback madness.Thanks for your review and suggestion.
At first I thought the notifier approach was nice, however...
There are two directions to use the notifier framework:
(1) lenovo-wmi-other callsblocking_notifier_call_chain()to querycapdata_fan
(2)capdata_fancallsblocking_notifier_call_chain()to provide data to lenovo-wmi-otherBoth requires some assumptions on probing/binding sequence:
(1)capdata_fanmust be probed before lenovo-wmi-other callingblocking_notifier_call_chain(), otherwise lenovo-wmi-other will mistakenly believecapdata_fanis missing
(2) lenovo-wmi-other must be probed beforecapdata_fancallingblocking_notifier_call_chain(), otherwise lenovo-wmi-other will wait for fan info foreverSo eventually we need *both directions* to break the assumptions on probing/binding sequence. Moreover, some extra synchronization primitives may be required to make sure the binding between lenovo-wmi- other and capdata00&01 won't be unbind while registering the HWMON device.
Quoted 2 lines
Sorry for being the one for suggesting the submaster approach in the first place, i did not know that the component framework is so limited when it comes to nested component masters :/
Quoted 8 lines
I'd say the sub-master approach is still the least ugly one.
The callback is always called in a bind callback. Hence, the component framework protects our sanity, so we don't need to worry about the other side of our component chain being messed up while handling one side. The approach doesn't need any assumption on binding sequence as the corresponding bind/unbind callbacks effectively create a state machine.
Fine, if you prefer the submaster approach, then ignore my suggestion. As long as you do not use wmi_has_guid(), i am happy.
Thanks,
Armin Wolf
Quoted 442 lines
Quoted 4 lines
If Mark is OK with using the submaster approach then you can ignore the above suggestion.
Thanks,
Armin WolfThanks,
RongQuoted 435 lines
Quoted 435 lines
Signed-off-by Rong Zhang <[email protected]>---
Changes in v6:
- Fix the error path ofcomponent_add(capdata00)
- Elaborate the design in commit messageChanges in v5:
- Fix missing include (thanks kernel test robot)Changes in v4:
- New patch in the series (thanks Armin Wolf's inspiration)
- Get rid ofwmi_has_guid()(see also [PATCH v4 3/7])--- drivers/platform/x86/lenovo/wmi-capdata.c | 265 +++++++++++++++++++++- drivers/platform/x86/lenovo/wmi-capdata.h | 20 ++ drivers/platform/x86/lenovo/wmi-other.c | 5 - 3 files changed, 283 insertions(+), 7 deletions(-)drivers/platform/x86/lenovo/wmi-capdata.c +263
-2@@ -27,6 +27,7 @@#define pr_fmt (fmt) KBUILD_MODNAME ": " fmt#include <linux/acpi.h> +#include <linux/bitfield.h> #include <linux/cleanup.h> #include <linux/component.h> #include <linux/container_of.h> @@ -50,10 +51,17 @@#define ACPI_AC_CLASS "ac_adapter"#define ACPI_AC_NOTIFY_STATUS 0x80 +#define LWMI_FEATURE_ID_FAN_TEST 0x05 + +#define LWMI_ATTR_ID_FAN_TEST \ + (FIELD_PREP(LWMI_ATTR_DEV_ID_MASK, LWMI_DEVICE_ID_FAN) | \ + FIELD_PREP(LWMI_ATTR_FEAT_ID_MASK, LWMI_FEATURE_ID_FAN_TEST)) +enum lwmi_cd_type {LENOVO_CAPABILITY_DATA_00 ,LENOVO_CAPABILITY_DATA_01 ,LENOVO_FAN_TEST_DATA , +CD_TYPE_NONE =-1 , };#define LWMI_CD_TABLE_ITEM (_type) \@@ -75,6 +83,20 @@ struct lwmi_cd_priv {struct notifier_block acpi_nb;/* ACPI events */ struct wmi_device *wdev;struct cd_list *list; + +/* +* A capdata device may be a component master of another capdata device. +* E.g., lenovo-wmi-other <-> capdata00 <-> capdata_fan +* |- master |- component +* |- sub-master +* |- sub-component +*/ +struct lwmi_cd_sub_master_priv { +struct device *master_dev; +cd_list_cb_t master_cb; +struct cd_list *sub_component_list;/* ERR_PTR(-ENODEV) implies no sub-component. */ +bool registered;/* Has the sub-master been registered? */ + } *sub_master; };struct cd_list {@@ -125,7 +147,7 @@ void lwmi_cd_match_add_all(struct device *master, struct component_match **matchreturn ;for (i =0 ; i <ARRAY_SIZE (lwmi_cd_table); i++) { -/* Skip optional interfaces. */ +/* Skip sub-components. */ if (lwmi_cd_table[i].type ==LENOVO_FAN_TEST_DATA )continue ;@@ -137,6 +159,56 @@ void lwmi_cd_match_add_all(struct device *master, struct component_match **match }EXPORT_SYMBOL_NS_GPL (lwmi_cd_match_add_all,"LENOVO_WMI_CD" ); +/** +* lwmi_cd_call_master_cb() - Call the master callback for the sub-component. +* @priv: Pointer to the capability data private data. +* +* Call the master callback and pass the sub-component list to it if the +* dependency chain (master <-> sub-master <-> sub-component) is complete. +*/ +static void lwmi_cd_call_master_cb (struct lwmi_cd_priv *priv) +{ +struct cd_list *sub_component_list = priv->sub_master->sub_component_list; + +/* +* Call the callback only if the dependency chain is ready: +* - Binding between master and sub-master: fills master_dev and master_cb +* - Binding between sub-master and sub-component: fills sub_component_list +* +* If a binding has been unbound before the other binding is bound, the +* corresponding members filled by the former are guaranteed to be cleared. +* +* This function is only called in bind callbacks, and the component +* framework guarantees bind/unbind callbacks may never execute +* simultaneously, which implies that it's impossible to have a race +* condition. +* +* Hence, this check is sufficient to ensure that the callback is called +* at most once and with the correct state, without relying on a specific +* sequence of binding establishment. +*/ +if (!sub_component_list || + !priv->sub_master->master_dev || + !priv->sub_master->master_cb) +return ; + +if (PTR_ERR (sub_component_list) == -ENODEV ) + sub_component_list =NULL ; +else if (WARN_ON (IS_ERR (sub_component_list))) +return ; + + priv->sub_master->master_cb (priv->sub_master->master_dev, + sub_component_list); + +/* +* Prevent "unbind and rebind" sequences from userspace from calling the +* callback twice. +*/ + priv->sub_master->master_cb =NULL ; + priv->sub_master->master_dev =NULL ; + priv->sub_master->sub_component_list =NULL ; +} +/** * lwmi_cd_component_bind() - Bind component to master device. * @cd_dev: Pointer to the lenovo-wmi-capdata driver parent device. @@ -147,6 +219,8 @@ EXPORT_SYMBOL_NS_GPL(lwmi_cd_match_add_all, "LENOVO_WMI_CD");* list. This is used to call lwmi_cd*_get_data to look up attribute data * from the lenovo-wmi-other driver. * +* If cd_dev is a sub-master, try to call the master callback. +* * Return: 0 */ static int lwmi_cd_component_bind(struct device *cd_dev,@@ -158,6 +232,11 @@ static int lwmi_cd_component_bind(struct device *cd_dev,switch (priv->list->type) {case LENOVO_CAPABILITY_DATA_00 : binder->cd00_list = priv->list; + + priv->sub_master->master_dev = om_dev; + priv->sub_master->master_cb = binder->cd_fan_list_cb; +lwmi_cd_call_master_cb (priv); +break ;case LENOVO_CAPABILITY_DATA_01 : binder->cd01_list = priv->list;@@ -169,8 +248,167 @@ static int lwmi_cd_component_bind(struct device *cd_dev,return 0 ; } +/** +* lwmi_cd_component_unbind() - Unbind component to master device. +* @cd_dev: Pointer to the lenovo-wmi-capdata driver parent device. +* @om_dev: Pointer to the lenovo-wmi-other driver parent device. +* @data: Unused. +* +* If cd_dev is a sub-master, clear the collected data from the master device to +* prevent the binding establishment between the sub-master and the sub- +* component (if it's about to happen) from calling the master callback. +*/ +static void lwmi_cd_component_unbind (struct device *cd_dev, +struct device *om_dev,void *data) +{ +struct lwmi_cd_priv *priv =dev_get_drvdata (cd_dev); + +switch (priv->list->type) { +case LENOVO_CAPABILITY_DATA_00 : + priv->sub_master->master_dev =NULL ; + priv->sub_master->master_cb =NULL ; +return ; +default : +return ; + } +} +static const struct component_ops lwmi_cd_component_ops = { .bind = lwmi_cd_component_bind, + .unbind = lwmi_cd_component_unbind, +}; + +/** +* lwmi_cd_sub_master_bind() - Bind sub-component of sub-master device +* @dev: The sub-master capdata basic device. +* +* Call component_bind_all to bind the sub-component device to the sub-master +* device. On success, collect the pointer to the sub-component list and try +* to call the master callback. +* +* Return: 0 on success, or an error code. +*/ +static int lwmi_cd_sub_master_bind (struct device *dev) +{ +struct lwmi_cd_priv *priv =dev_get_drvdata (dev); +struct cd_list *sub_component_list; +int ret; + + ret =component_bind_all (dev, &sub_component_list); +if (ret) +return ret; + + priv->sub_master->sub_component_list = sub_component_list; +lwmi_cd_call_master_cb (priv); + +return 0 ; +} + +/** +* lwmi_cd_sub_master_unbind() - Unbind sub-component of sub-master device +* @dev: The sub-master capdata basic device +* +* Clear the collected pointer to the sub-component list to prevent the binding +* establishment between the sub-master and the sub-component (if it's about to +* happen) from calling the master callback. Then, call component_unbind_all to +* unbind the sub-component device from the sub-master device. +*/ +static void lwmi_cd_sub_master_unbind (struct device *dev) +{ +struct lwmi_cd_priv *priv =dev_get_drvdata (dev); + + priv->sub_master->sub_component_list =NULL ; + +component_unbind_all (dev,NULL ); +} + +static const struct component_master_ops lwmi_cd_sub_master_ops = { + .bind = lwmi_cd_sub_master_bind, + .unbind = lwmi_cd_sub_master_unbind, +}; + +/** +* lwmi_cd_sub_master_add() - Register a sub-master with its sub-component +* @priv: Pointer to the sub-master capdata device private data. +* @sub_component_type: Type of the sub-component. +* +* Match the sub-component type and register the current capdata device as a +* sub-master. If the given sub-component type is CD_TYPE_NONE, mark the sub- +* component as non-existent without registering sub-master. +* +* Return: 0 on success, or an error code. +*/ +static int lwmi_cd_sub_master_add (struct lwmi_cd_priv *priv, +enum lwmi_cd_type sub_component_type) +{ +struct component_match *master_match =NULL ; +int ret; + + priv->sub_master =devm_kzalloc (&priv->wdev->dev,sizeof (*priv->sub_master),GFP_KERNEL ); +if (!priv->sub_master) +return -ENOMEM ; + +if (sub_component_type ==CD_TYPE_NONE ) { +/* The master callback will be called with NULL on bind. */ + priv->sub_master->sub_component_list =ERR_PTR (-ENODEV ); + priv->sub_master->registered = false; +return 0 ; + } + +/* +* lwmi_cd_match() needs a pointer to enum lwmi_cd_type, but on-stack +* data cannot be used here. Steal one from lwmi_cd_table. +*/ +component_match_add (&priv->wdev->dev, &master_match, lwmi_cd_match, + (void *)&lwmi_cd_table[sub_component_type].type); +if (IS_ERR (master_match)) +return PTR_ERR (master_match); + + ret =component_master_add_with_match (&priv->wdev->dev, &lwmi_cd_sub_master_ops, + master_match); +if (ret) +return ret; + + priv->sub_master->registered = true; +return 0 ; +} + +/** +* lwmi_cd_sub_master_del() - Unregister a sub-master if it's registered +* @priv: Pointer to the sub-master capdata device private data. +*/ +static void lwmi_cd_sub_master_del (struct lwmi_cd_priv *priv) +{ +if (priv->sub_master->registered) { +component_master_del (&priv->wdev->dev, &lwmi_cd_sub_master_ops); + priv->sub_master->registered = false; + } +} + +/** +* lwmi_cd_sub_component_bind() - Bind sub-component to sub-master device. +* @sc_dev: Pointer to the sub-component capdata parent device. +* @sm_dev: Pointer to the sub-master capdata parent device. +* @data: Pointer used to return the capability data list pointer. +* +* On sub-master's bind, provide a pointer to the local capdata list. +* This is used by the sub-master to call the master callback. +* +* Return: 0 +*/ +static int lwmi_cd_sub_component_bind (struct device *sc_dev, +struct device *sm_dev,void *data) +{ +struct lwmi_cd_priv *priv =dev_get_drvdata (sc_dev); +struct cd_list **listp = data; + + *listp = priv->list; + +return 0 ; +} + +static const struct component_ops lwmi_cd_sub_component_ops = { + .bind = lwmi_cd_sub_component_bind, };/** @@ -470,9 +708,28 @@ static int lwmi_cd_probe(struct wmi_device *wdev, const void *context) goto out;switch (info->type) { -case LENOVO_CAPABILITY_DATA_00 : +case LENOVO_CAPABILITY_DATA_00 : { +enum lwmi_cd_type sub_component_type =LENOVO_FAN_TEST_DATA ; +struct capdata00 capdata00; + + ret =lwmi_cd00_get_data (priv->list,LWMI_ATTR_ID_FAN_TEST , &capdata00); +if (ret || !(capdata00.supported &LWMI_SUPP_VALID )) { +dev_dbg (&wdev->dev,"capdata00 declares no fan test support\n" ); + sub_component_type =CD_TYPE_NONE ; + } + +/* Sub-master (capdata00) <-> sub-component (capdata_fan) */ + ret =lwmi_cd_sub_master_add (priv, sub_component_type); +if (ret) + goto out; + +/* Master (lenovo-wmi-other) <-> sub-master (capdata00) */ ret =component_add (&wdev->dev, &lwmi_cd_component_ops); +if (ret) +lwmi_cd_sub_master_del (priv); + goto out; + }case LENOVO_CAPABILITY_DATA_01 : priv->acpi_nb.notifier_call = lwmi_cd01_notifier_call;@@ -488,6 +745,7 @@ static int lwmi_cd_probe(struct wmi_device *wdev, const void *context) ret =component_add (&wdev->dev, &lwmi_cd_component_ops); goto out;case LENOVO_FAN_TEST_DATA : + ret =component_add (&wdev->dev, &lwmi_cd_sub_component_ops); goto out;default :return -EINVAL ;@@ -509,10 +767,13 @@ static void lwmi_cd_remove(struct wmi_device *wdev)switch (priv->list->type) {case LENOVO_CAPABILITY_DATA_00 : +lwmi_cd_sub_master_del (priv); + fallthrough;case LENOVO_CAPABILITY_DATA_01 :component_del (&wdev->dev, &lwmi_cd_component_ops);break ;case LENOVO_FAN_TEST_DATA : +component_del (&wdev->dev, &lwmi_cd_sub_component_ops);break ;default :WARN_ON (1 );drivers/platform/x86/lenovo/wmi-capdata.h +20
-0@@ -5,8 +5,20 @@#ifndef _LENOVO_WMI_CAPDATA_H_#define _LENOVO_WMI_CAPDATA_H_ +#include <linux/bits.h> #include <linux/types.h> +#define LWMI_SUPP_VALID BIT(0) +#define LWMI_SUPP_MAY_GET (LWMI_SUPP_VALID | BIT(1)) +#define LWMI_SUPP_MAY_SET (LWMI_SUPP_VALID | BIT(2)) + +#define LWMI_ATTR_DEV_ID_MASK GENMASK(31, 24) +#define LWMI_ATTR_FEAT_ID_MASK GENMASK(23, 16) +#define LWMI_ATTR_MODE_ID_MASK GENMASK(15, 8) +#define LWMI_ATTR_TYPE_ID_MASK GENMASK(7, 0) + +#define LWMI_DEVICE_ID_FAN 0x04 +struct component_match ;struct device ;struct cd_list ;@@ -32,9 +44,17 @@ struct capdata_fan {u32 max_rpm; }; +typedef void (*cd_list_cb_t )(struct device *master_dev,struct cd_list *cd_list); +struct lwmi_cd_binder {struct cd_list *cd00_list;struct cd_list *cd01_list; +/* +* May be called during or after the bind callback. +* Will be called with NULL if capdata_fan does not exist. +* The pointer is only valid in the callback; never keep it for later use! +*/ +cd_list_cb_t cd_fan_list_cb; };void lwmi_cd_match_add_all (struct device *master,struct component_match **matchptr);drivers/platform/x86/lenovo/wmi-other.c +0
-5@@ -54,11 +54,6 @@#define LWMI_FEATURE_VALUE_GET 17#define LWMI_FEATURE_VALUE_SET 18 -#define LWMI_ATTR_DEV_ID_MASK GENMASK(31, 24) -#define LWMI_ATTR_FEAT_ID_MASK GENMASK(23, 16) -#define LWMI_ATTR_MODE_ID_MASK GENMASK(15, 8) -#define LWMI_ATTR_TYPE_ID_MASK GENMASK(7, 0) -#define LWMI_OM_FW_ATTR_BASE_PATH "lenovo-wmi-other"static BLOCKING_NOTIFIER_HEAD (om_chain_head);
Ilpo Järvinen
maintainerRe: [PATCH v6 6/7] platform/x86: lenovo-wmi-capdata: Wire up Fan Test Data
In reply to Rong ZhangQuoted 98 lines · Rong Zhang
A capdata00 attribute (
0x04050000) describes the presence of Fan Test Data. Query it, and bind Fan Test Data as a component of capdata00 accordingly. The component master of capdata00 may pass a callback while binding to retrieve fan info from Fan Test Data.Summarizing this scheme:
lenovo-wmi-other <-> capdata00 <-> capdata_fan |- master |- component |- sub-master |- sub-componentThe callback will be called once both the master and the sub-component are bound to the sub-master (component).
This scheme is essential to solve these issues:
- The component framework only supports one aggregation per master
- A binding is only established until all components are found
- The Fan Test Data interface may be missing on some devices
- To get rid of queries for the presense of WMI GUIDscapdata00 is registered as a component and a sub-master on probe, instead of chaining the registerations in one's bind callback. This is because calling (un)registration methods of the component framework causes deadlock in (un)bind callbacks, i.e., it's impossible to register capdata00 as a sub-master/component in its component/sub-master bind callback, and vice versa.
Signed-off-by Rong Zhang <[email protected]>---
Changes in v6:
- Fix the error path ofcomponent_add(capdata00)
- Elaborate the design in commit messageChanges in v5:
- Fix missing include (thanks kernel test robot)Changes in v4:
- New patch in the series (thanks Armin Wolf's inspiration)
- Get rid ofwmi_has_guid()(see also [PATCH v4 3/7])--- drivers/platform/x86/lenovo/wmi-capdata.c | 265 +++++++++++++++++++++- drivers/platform/x86/lenovo/wmi-capdata.h | 20 ++ drivers/platform/x86/lenovo/wmi-other.c | 5 - 3 files changed, 283 insertions(+), 7 deletions(-)drivers/platform/x86/lenovo/wmi-capdata.c +22
-0@@ -27,6 +27,7 @@#define pr_fmt (fmt) KBUILD_MODNAME ": " fmt#include <linux/acpi.h> +#include <linux/bitfield.h> #include <linux/cleanup.h> #include <linux/component.h> #include <linux/container_of.h> @@ -50,10 +51,17 @@#define ACPI_AC_CLASS "ac_adapter"#define ACPI_AC_NOTIFY_STATUS 0x80 +#define LWMI_FEATURE_ID_FAN_TEST 0x05 + +#define LWMI_ATTR_ID_FAN_TEST \ + (FIELD_PREP(LWMI_ATTR_DEV_ID_MASK, LWMI_DEVICE_ID_FAN) | \ + FIELD_PREP(LWMI_ATTR_FEAT_ID_MASK, LWMI_FEATURE_ID_FAN_TEST)) +enum lwmi_cd_type {LENOVO_CAPABILITY_DATA_00 ,LENOVO_CAPABILITY_DATA_01 ,LENOVO_FAN_TEST_DATA , +CD_TYPE_NONE =-1 , };#define LWMI_CD_TABLE_ITEM (_type) \@@ -75,6 +83,20 @@ struct lwmi_cd_priv {struct notifier_block acpi_nb;/* ACPI events */ struct wmi_device *wdev;struct cd_list *list; + +/* +* A capdata device may be a component master of another capdata device. +* E.g., lenovo-wmi-other <-> capdata00 <-> capdata_fan +* |- master |- component +* |- sub-master +* |- sub-component +*/ +struct lwmi_cd_sub_master_priv { +struct device *master_dev; +cd_list_cb_t master_cb; +struct cd_list *sub_component_list;/* ERR_PTR(-ENODEV) implies no sub-component. */ +bool registered;/* Has the sub-master been registered? */ + } *sub_master; };struct cd_list {
drivers/platform/x86/lenovo/wmi-capdata.c void lwmi_cd_match_add_all(struct device *master, struct component_match **match · line 150
Quoted 5 lines
drivers/platform/x86/lenovo/wmi-capdata.c +1
-1@@ -125,7 +147,7 @@ void lwmi_cd_match_add_all(struct device *master, struct component_match **matchreturn ;for (i =0 ; i <ARRAY_SIZE (lwmi_cd_table); i++) { -/* Skip optional interfaces. */ +/* Skip sub-components. */
Didn't you just introduce it? If that's the case, please try to avoid such back-and-forth changes within the series.
Quoted 31 lines
drivers/platform/x86/lenovo/wmi-capdata.c +24
-0if (lwmi_cd_table[i].type ==LENOVO_FAN_TEST_DATA )continue ;@@ -137,6 +159,56 @@ void lwmi_cd_match_add_all(struct device *master, struct component_match **match }EXPORT_SYMBOL_NS_GPL (lwmi_cd_match_add_all,"LENOVO_WMI_CD" ); +/** +* lwmi_cd_call_master_cb() - Call the master callback for the sub-component. +* @priv: Pointer to the capability data private data. +* +* Call the master callback and pass the sub-component list to it if the +* dependency chain (master <-> sub-master <-> sub-component) is complete. +*/ +static void lwmi_cd_call_master_cb (struct lwmi_cd_priv *priv) +{ +struct cd_list *sub_component_list = priv->sub_master->sub_component_list; + +/* +* Call the callback only if the dependency chain is ready: +* - Binding between master and sub-master: fills master_dev and master_cb +* - Binding between sub-master and sub-component: fills sub_component_list +* +* If a binding has been unbound before the other binding is bound, the +* corresponding members filled by the former are guaranteed to be cleared. +* +* This function is only called in bind callbacks, and the component +* framework guarantees bind/unbind callbacks may never execute +* simultaneously, which implies that it's impossible to have a race +* condition. +*
drivers/platform/x86/lenovo/wmi-capdata.c void lwmi_cd_match_add_all(struct device *master, struct component_match **match · line 195
Quoted 10 lines
drivers/platform/x86/lenovo/wmi-capdata.c +10
-0+* Hence, this check is sufficient to ensure that the callback is called +* at most once and with the correct state, without relying on a specific +* sequence of binding establishment. +*/ +if (!sub_component_list || + !priv->sub_master->master_dev || + !priv->sub_master->master_cb) +return ; + +if (PTR_ERR (sub_component_list) == -ENODEV )
Include?
drivers/platform/x86/lenovo/wmi-capdata.c void lwmi_cd_match_add_all(struct device *master, struct component_match **match · line 197
Quoted 2 lines
drivers/platform/x86/lenovo/wmi-capdata.c +2
-0+ sub_component_list =NULL ; + else if (WARN_ON(IS_ERR(sub_component_list)))
Include?
(Some earlier patch may already need to add these, it probably was relevant there already)
Quoted 145 lines
drivers/platform/x86/lenovo/wmi-capdata.c +122
-0+return ; + + priv->sub_master->master_cb (priv->sub_master->master_dev, + sub_component_list); + +/* +* Prevent "unbind and rebind" sequences from userspace from calling the +* callback twice. +*/ + priv->sub_master->master_cb =NULL ; + priv->sub_master->master_dev =NULL ; + priv->sub_master->sub_component_list =NULL ; +} +/** * lwmi_cd_component_bind() - Bind component to master device. * @cd_dev: Pointer to the lenovo-wmi-capdata driver parent device. @@ -147,6 +219,8 @@ EXPORT_SYMBOL_NS_GPL(lwmi_cd_match_add_all, "LENOVO_WMI_CD");* list. This is used to call lwmi_cd*_get_data to look up attribute data * from the lenovo-wmi-other driver. * +* If cd_dev is a sub-master, try to call the master callback. +* * Return: 0 */ static int lwmi_cd_component_bind(struct device *cd_dev,@@ -158,6 +232,11 @@ static int lwmi_cd_component_bind(struct device *cd_dev,switch (priv->list->type) {case LENOVO_CAPABILITY_DATA_00 : binder->cd00_list = priv->list; + + priv->sub_master->master_dev = om_dev; + priv->sub_master->master_cb = binder->cd_fan_list_cb; +lwmi_cd_call_master_cb (priv); +break ;case LENOVO_CAPABILITY_DATA_01 : binder->cd01_list = priv->list;@@ -169,8 +248,167 @@ static int lwmi_cd_component_bind(struct device *cd_dev,return 0 ; } +/** +* lwmi_cd_component_unbind() - Unbind component to master device. +* @cd_dev: Pointer to the lenovo-wmi-capdata driver parent device. +* @om_dev: Pointer to the lenovo-wmi-other driver parent device. +* @data: Unused. +* +* If cd_dev is a sub-master, clear the collected data from the master device to +* prevent the binding establishment between the sub-master and the sub- +* component (if it's about to happen) from calling the master callback. +*/ +static void lwmi_cd_component_unbind (struct device *cd_dev, +struct device *om_dev,void *data) +{ +struct lwmi_cd_priv *priv =dev_get_drvdata (cd_dev); + +switch (priv->list->type) { +case LENOVO_CAPABILITY_DATA_00 : + priv->sub_master->master_dev =NULL ; + priv->sub_master->master_cb =NULL ; +return ; +default : +return ; + } +} +static const struct component_ops lwmi_cd_component_ops = { .bind = lwmi_cd_component_bind, + .unbind = lwmi_cd_component_unbind, +}; + +/** +* lwmi_cd_sub_master_bind() - Bind sub-component of sub-master device +* @dev: The sub-master capdata basic device. +* +* Call component_bind_all to bind the sub-component device to the sub-master +* device. On success, collect the pointer to the sub-component list and try +* to call the master callback. +* +* Return: 0 on success, or an error code. +*/ +static int lwmi_cd_sub_master_bind (struct device *dev) +{ +struct lwmi_cd_priv *priv =dev_get_drvdata (dev); +struct cd_list *sub_component_list; +int ret; + + ret =component_bind_all (dev, &sub_component_list); +if (ret) +return ret; + + priv->sub_master->sub_component_list = sub_component_list; +lwmi_cd_call_master_cb (priv); + +return 0 ; +} + +/** +* lwmi_cd_sub_master_unbind() - Unbind sub-component of sub-master device +* @dev: The sub-master capdata basic device +* +* Clear the collected pointer to the sub-component list to prevent the binding +* establishment between the sub-master and the sub-component (if it's about to +* happen) from calling the master callback. Then, call component_unbind_all to +* unbind the sub-component device from the sub-master device. +*/ +static void lwmi_cd_sub_master_unbind (struct device *dev) +{ +struct lwmi_cd_priv *priv =dev_get_drvdata (dev); + + priv->sub_master->sub_component_list =NULL ; + +component_unbind_all (dev,NULL ); +} + +static const struct component_master_ops lwmi_cd_sub_master_ops = { + .bind = lwmi_cd_sub_master_bind, + .unbind = lwmi_cd_sub_master_unbind, +}; + +/** +* lwmi_cd_sub_master_add() - Register a sub-master with its sub-component +* @priv: Pointer to the sub-master capdata device private data. +* @sub_component_type: Type of the sub-component. +* +* Match the sub-component type and register the current capdata device as a +* sub-master. If the given sub-component type is CD_TYPE_NONE, mark the sub- +* component as non-existent without registering sub-master. +* +* Return: 0 on success, or an error code. +*/ +static int lwmi_cd_sub_master_add (struct lwmi_cd_priv *priv, +enum lwmi_cd_type sub_component_type) +{ +struct component_match *master_match =NULL ; +int ret; + + priv->sub_master =devm_kzalloc (&priv->wdev->dev,sizeof (*priv->sub_master),GFP_KERNEL ); +if (!priv->sub_master) +return -ENOMEM ; + +if (sub_component_type ==CD_TYPE_NONE ) { +/* The master callback will be called with NULL on bind. */ + priv->sub_master->sub_component_list =ERR_PTR (-ENODEV );
drivers/platform/x86/lenovo/wmi-capdata.c static int lwmi_cd_component_bind(struct device *cd_dev, · line 363
Quoted 10 lines
drivers/platform/x86/lenovo/wmi-capdata.c +10
-0+ priv->sub_master->registered = false; +return 0 ; + } + +/* +* lwmi_cd_match() needs a pointer to enum lwmi_cd_type, but on-stack +* data cannot be used here. Steal one from lwmi_cd_table. +*/ +component_match_add (&priv->wdev->dev, &master_match, lwmi_cd_match, + (void *)&lwmi_cd_table[sub_component_type].type);
Is void * cast required?
Quoted 9 lines
drivers/platform/x86/lenovo/wmi-capdata.c +9
-0+if (IS_ERR (master_match)) +return PTR_ERR (master_match); + + ret =component_master_add_with_match (&priv->wdev->dev, &lwmi_cd_sub_master_ops, + master_match); +if (ret) +return ret; + + priv->sub_master->registered = true;
drivers/platform/x86/lenovo/wmi-capdata.c static int lwmi_cd_component_bind(struct device *cd_dev, · line 382
Quoted 10 lines
drivers/platform/x86/lenovo/wmi-capdata.c +10
-0+return 0 ; +} + +/** +* lwmi_cd_sub_master_del() - Unregister a sub-master if it's registered +* @priv: Pointer to the sub-master capdata device private data. +*/ +static void lwmi_cd_sub_master_del (struct lwmi_cd_priv *priv) +{ +if (priv->sub_master->registered) {
Reverse the logic and return early instead.
Quoted 144 lines
drivers/platform/x86/lenovo/wmi-capdata.c +53
-1+component_master_del (&priv->wdev->dev, &lwmi_cd_sub_master_ops); + priv->sub_master->registered = false; + } +} + +/** +* lwmi_cd_sub_component_bind() - Bind sub-component to sub-master device. +* @sc_dev: Pointer to the sub-component capdata parent device. +* @sm_dev: Pointer to the sub-master capdata parent device. +* @data: Pointer used to return the capability data list pointer. +* +* On sub-master's bind, provide a pointer to the local capdata list. +* This is used by the sub-master to call the master callback. +* +* Return: 0 +*/ +static int lwmi_cd_sub_component_bind (struct device *sc_dev, +struct device *sm_dev,void *data) +{ +struct lwmi_cd_priv *priv =dev_get_drvdata (sc_dev); +struct cd_list **listp = data; + + *listp = priv->list; + +return 0 ; +} + +static const struct component_ops lwmi_cd_sub_component_ops = { + .bind = lwmi_cd_sub_component_bind, };/** @@ -470,9 +708,28 @@ static int lwmi_cd_probe(struct wmi_device *wdev, const void *context) goto out;switch (info->type) { -case LENOVO_CAPABILITY_DATA_00 : +case LENOVO_CAPABILITY_DATA_00 : { +enum lwmi_cd_type sub_component_type =LENOVO_FAN_TEST_DATA ; +struct capdata00 capdata00; + + ret =lwmi_cd00_get_data (priv->list,LWMI_ATTR_ID_FAN_TEST , &capdata00); +if (ret || !(capdata00.supported &LWMI_SUPP_VALID )) { +dev_dbg (&wdev->dev,"capdata00 declares no fan test support\n" ); + sub_component_type =CD_TYPE_NONE ; + } + +/* Sub-master (capdata00) <-> sub-component (capdata_fan) */ + ret =lwmi_cd_sub_master_add (priv, sub_component_type); +if (ret) + goto out; + +/* Master (lenovo-wmi-other) <-> sub-master (capdata00) */ ret =component_add (&wdev->dev, &lwmi_cd_component_ops); +if (ret) +lwmi_cd_sub_master_del (priv); + goto out; + }case LENOVO_CAPABILITY_DATA_01 : priv->acpi_nb.notifier_call = lwmi_cd01_notifier_call;@@ -488,6 +745,7 @@ static int lwmi_cd_probe(struct wmi_device *wdev, const void *context) ret =component_add (&wdev->dev, &lwmi_cd_component_ops); goto out;case LENOVO_FAN_TEST_DATA : + ret =component_add (&wdev->dev, &lwmi_cd_sub_component_ops); goto out;default :return -EINVAL ;@@ -509,10 +767,13 @@ static void lwmi_cd_remove(struct wmi_device *wdev)switch (priv->list->type) {case LENOVO_CAPABILITY_DATA_00 : +lwmi_cd_sub_master_del (priv); + fallthrough;case LENOVO_CAPABILITY_DATA_01 :component_del (&wdev->dev, &lwmi_cd_component_ops);break ;case LENOVO_FAN_TEST_DATA : +component_del (&wdev->dev, &lwmi_cd_sub_component_ops);break ;default :WARN_ON (1 );drivers/platform/x86/lenovo/wmi-capdata.h +20
-0@@ -5,8 +5,20 @@#ifndef _LENOVO_WMI_CAPDATA_H_#define _LENOVO_WMI_CAPDATA_H_ +#include <linux/bits.h> #include <linux/types.h> +#define LWMI_SUPP_VALID BIT(0) +#define LWMI_SUPP_MAY_GET (LWMI_SUPP_VALID | BIT(1)) +#define LWMI_SUPP_MAY_SET (LWMI_SUPP_VALID | BIT(2)) + +#define LWMI_ATTR_DEV_ID_MASK GENMASK(31, 24) +#define LWMI_ATTR_FEAT_ID_MASK GENMASK(23, 16) +#define LWMI_ATTR_MODE_ID_MASK GENMASK(15, 8) +#define LWMI_ATTR_TYPE_ID_MASK GENMASK(7, 0) + +#define LWMI_DEVICE_ID_FAN 0x04 +struct component_match ;struct device ;struct cd_list ;@@ -32,9 +44,17 @@ struct capdata_fan {u32 max_rpm; }; +typedef void (*cd_list_cb_t )(struct device *master_dev,struct cd_list *cd_list); +struct lwmi_cd_binder {struct cd_list *cd00_list;struct cd_list *cd01_list; +/* +* May be called during or after the bind callback. +* Will be called with NULL if capdata_fan does not exist. +* The pointer is only valid in the callback; never keep it for later use! +*/ +cd_list_cb_t cd_fan_list_cb; };void lwmi_cd_match_add_all (struct device *master,struct component_match **matchptr);drivers/platform/x86/lenovo/wmi-other.c +0
-5@@ -54,11 +54,6 @@#define LWMI_FEATURE_VALUE_GET 17#define LWMI_FEATURE_VALUE_SET 18 -#define LWMI_ATTR_DEV_ID_MASK GENMASK(31, 24) -#define LWMI_ATTR_FEAT_ID_MASK GENMASK(23, 16) -#define LWMI_ATTR_MODE_ID_MASK GENMASK(15, 8) -#define LWMI_ATTR_TYPE_ID_MASK GENMASK(7, 0) -#define LWMI_OM_FW_ATTR_BASE_PATH "lenovo-wmi-other"static BLOCKING_NOTIFIER_HEAD (om_chain_head);
Signature · 1 line
i.
Re: [PATCH v6 6/7] platform/x86: lenovo-wmi-capdata: Wire up Fan Test Data
Hi Ilpo,
Thanks for your review.
Quoted 102 lines · Ilpo Järvinen
Quoted 100 lines · Rong Zhang
A capdata00 attribute (
0x04050000) describes the presence of Fan Test Data. Query it, and bind Fan Test Data as a component of capdata00 accordingly. The component master of capdata00 may pass a callback while binding to retrieve fan info from Fan Test Data.Summarizing this scheme:
lenovo-wmi-other <-> capdata00 <-> capdata_fan |- master |- component |- sub-master |- sub-componentThe callback will be called once both the master and the sub-component are bound to the sub-master (component).
This scheme is essential to solve these issues:
- The component framework only supports one aggregation per master
- A binding is only established until all components are found
- The Fan Test Data interface may be missing on some devices
- To get rid of queries for the presense of WMI GUIDscapdata00 is registered as a component and a sub-master on probe, instead of chaining the registerations in one's bind callback. This is because calling (un)registration methods of the component framework causes deadlock in (un)bind callbacks, i.e., it's impossible to register capdata00 as a sub-master/component in its component/sub-master bind callback, and vice versa.
Signed-off-by Rong Zhang <[email protected]>---
Changes in v6:
- Fix the error path ofcomponent_add(capdata00)
- Elaborate the design in commit messageChanges in v5:
- Fix missing include (thanks kernel test robot)Changes in v4:
- New patch in the series (thanks Armin Wolf's inspiration)
- Get rid ofwmi_has_guid()(see also [PATCH v4 3/7])--- drivers/platform/x86/lenovo/wmi-capdata.c | 265 +++++++++++++++++++++- drivers/platform/x86/lenovo/wmi-capdata.h | 20 ++ drivers/platform/x86/lenovo/wmi-other.c | 5 - 3 files changed, 283 insertions(+), 7 deletions(-)drivers/platform/x86/lenovo/wmi-capdata.c +22
-0@@ -27,6 +27,7 @@#define pr_fmt (fmt) KBUILD_MODNAME ": " fmt#include <linux/acpi.h> +#include <linux/bitfield.h> #include <linux/cleanup.h> #include <linux/component.h> #include <linux/container_of.h> @@ -50,10 +51,17 @@#define ACPI_AC_CLASS "ac_adapter"#define ACPI_AC_NOTIFY_STATUS 0x80 +#define LWMI_FEATURE_ID_FAN_TEST 0x05 + +#define LWMI_ATTR_ID_FAN_TEST \ + (FIELD_PREP(LWMI_ATTR_DEV_ID_MASK, LWMI_DEVICE_ID_FAN) | \ + FIELD_PREP(LWMI_ATTR_FEAT_ID_MASK, LWMI_FEATURE_ID_FAN_TEST)) +enum lwmi_cd_type {LENOVO_CAPABILITY_DATA_00 ,LENOVO_CAPABILITY_DATA_01 ,LENOVO_FAN_TEST_DATA , +CD_TYPE_NONE =-1 , };#define LWMI_CD_TABLE_ITEM (_type) \@@ -75,6 +83,20 @@ struct lwmi_cd_priv {struct notifier_block acpi_nb;/* ACPI events */ struct wmi_device *wdev;struct cd_list *list; + +/* +* A capdata device may be a component master of another capdata device. +* E.g., lenovo-wmi-other <-> capdata00 <-> capdata_fan +* |- master |- component +* |- sub-master +* |- sub-component +*/ +struct lwmi_cd_sub_master_priv { +struct device *master_dev; +cd_list_cb_t master_cb; +struct cd_list *sub_component_list;/* ERR_PTR(-ENODEV) implies no sub-component. */ +bool registered;/* Has the sub-master been registered? */ + } *sub_master; };struct cd_list {@@ -125,7 +147,7 @@ void lwmi_cd_match_add_all(struct device *master, struct component_match **matchreturn ;
Quoted 6 lines
drivers/platform/x86/lenovo/wmi-capdata.c void lwmi_cd_match_add_all(struct device *master, struct component_match **match · line 150
Quoted 3 lines
drivers/platform/x86/lenovo/wmi-capdata.c +1
-1for (i =0 ; i <ARRAY_SIZE (lwmi_cd_table); i++) { -/* Skip optional interfaces. */ +/* Skip sub-components. */ Didn't you just introduce it? If that's the case, please try to avoid such back-and-forth changes within the series.
Ahh yes. Will rearrange the change. Thanks.
Quoted 44 lines
Quoted 31 lines
drivers/platform/x86/lenovo/wmi-capdata.c +24
-0if (lwmi_cd_table[i].type ==LENOVO_FAN_TEST_DATA )continue ;@@ -137,6 +159,56 @@ void lwmi_cd_match_add_all(struct device *master, struct component_match **match }EXPORT_SYMBOL_NS_GPL (lwmi_cd_match_add_all,"LENOVO_WMI_CD" ); +/** +* lwmi_cd_call_master_cb() - Call the master callback for the sub-component. +* @priv: Pointer to the capability data private data. +* +* Call the master callback and pass the sub-component list to it if the +* dependency chain (master <-> sub-master <-> sub-component) is complete. +*/ +static void lwmi_cd_call_master_cb (struct lwmi_cd_priv *priv) +{ +struct cd_list *sub_component_list = priv->sub_master->sub_component_list; + +/* +* Call the callback only if the dependency chain is ready: +* - Binding between master and sub-master: fills master_dev and master_cb +* - Binding between sub-master and sub-component: fills sub_component_list +* +* If a binding has been unbound before the other binding is bound, the +* corresponding members filled by the former are guaranteed to be cleared. +* +* This function is only called in bind callbacks, and the component +* framework guarantees bind/unbind callbacks may never execute +* simultaneously, which implies that it's impossible to have a race +* condition. +* drivers/platform/x86/lenovo/wmi-capdata.c void lwmi_cd_match_add_all(struct device *master, struct component_match **match · line 195
Quoted 10 lines
drivers/platform/x86/lenovo/wmi-capdata.c +10
-0+* Hence, this check is sufficient to ensure that the callback is called +* at most once and with the correct state, without relying on a specific +* sequence of binding establishment. +*/ +if (!sub_component_list || + !priv->sub_master->master_dev || + !priv->sub_master->master_cb) +return ; + +if (PTR_ERR (sub_component_list) == -ENODEV )Include?
Quoted 7 lines
drivers/platform/x86/lenovo/wmi-capdata.c void lwmi_cd_match_add_all(struct device *master, struct component_match **match · line 197
Quoted 2 lines
drivers/platform/x86/lenovo/wmi-capdata.c +2
-0+ sub_component_list =NULL ; + else if (WARN_ON(IS_ERR(sub_component_list)))Include?
(Some earlier patch may already need to add these, it probably was relevant there already)
*Embarrassed voice* Thanks for all the #include reminders!
Quoted 149 lines
Quoted 149 lines
drivers/platform/x86/lenovo/wmi-capdata.c +126
-0+return ; + + priv->sub_master->master_cb (priv->sub_master->master_dev, + sub_component_list); + +/* +* Prevent "unbind and rebind" sequences from userspace from calling the +* callback twice. +*/ + priv->sub_master->master_cb =NULL ; + priv->sub_master->master_dev =NULL ; + priv->sub_master->sub_component_list =NULL ; +} +/** * lwmi_cd_component_bind() - Bind component to master device. * @cd_dev: Pointer to the lenovo-wmi-capdata driver parent device. @@ -147,6 +219,8 @@ EXPORT_SYMBOL_NS_GPL(lwmi_cd_match_add_all, "LENOVO_WMI_CD");* list. This is used to call lwmi_cd*_get_data to look up attribute data * from the lenovo-wmi-other driver. * +* If cd_dev is a sub-master, try to call the master callback. +* * Return: 0 */ static int lwmi_cd_component_bind(struct device *cd_dev,@@ -158,6 +232,11 @@ static int lwmi_cd_component_bind(struct device *cd_dev,switch (priv->list->type) {case LENOVO_CAPABILITY_DATA_00 : binder->cd00_list = priv->list; + + priv->sub_master->master_dev = om_dev; + priv->sub_master->master_cb = binder->cd_fan_list_cb; +lwmi_cd_call_master_cb (priv); +break ;case LENOVO_CAPABILITY_DATA_01 : binder->cd01_list = priv->list;@@ -169,8 +248,167 @@ static int lwmi_cd_component_bind(struct device *cd_dev,return 0 ; } +/** +* lwmi_cd_component_unbind() - Unbind component to master device. +* @cd_dev: Pointer to the lenovo-wmi-capdata driver parent device. +* @om_dev: Pointer to the lenovo-wmi-other driver parent device. +* @data: Unused. +* +* If cd_dev is a sub-master, clear the collected data from the master device to +* prevent the binding establishment between the sub-master and the sub- +* component (if it's about to happen) from calling the master callback. +*/ +static void lwmi_cd_component_unbind (struct device *cd_dev, +struct device *om_dev,void *data) +{ +struct lwmi_cd_priv *priv =dev_get_drvdata (cd_dev); + +switch (priv->list->type) { +case LENOVO_CAPABILITY_DATA_00 : + priv->sub_master->master_dev =NULL ; + priv->sub_master->master_cb =NULL ; +return ; +default : +return ; + } +} +static const struct component_ops lwmi_cd_component_ops = { .bind = lwmi_cd_component_bind, + .unbind = lwmi_cd_component_unbind, +}; + +/** +* lwmi_cd_sub_master_bind() - Bind sub-component of sub-master device +* @dev: The sub-master capdata basic device. +* +* Call component_bind_all to bind the sub-component device to the sub-master +* device. On success, collect the pointer to the sub-component list and try +* to call the master callback. +* +* Return: 0 on success, or an error code. +*/ +static int lwmi_cd_sub_master_bind (struct device *dev) +{ +struct lwmi_cd_priv *priv =dev_get_drvdata (dev); +struct cd_list *sub_component_list; +int ret; + + ret =component_bind_all (dev, &sub_component_list); +if (ret) +return ret; + + priv->sub_master->sub_component_list = sub_component_list; +lwmi_cd_call_master_cb (priv); + +return 0 ; +} + +/** +* lwmi_cd_sub_master_unbind() - Unbind sub-component of sub-master device +* @dev: The sub-master capdata basic device +* +* Clear the collected pointer to the sub-component list to prevent the binding +* establishment between the sub-master and the sub-component (if it's about to +* happen) from calling the master callback. Then, call component_unbind_all to +* unbind the sub-component device from the sub-master device. +*/ +static void lwmi_cd_sub_master_unbind (struct device *dev) +{ +struct lwmi_cd_priv *priv =dev_get_drvdata (dev); + + priv->sub_master->sub_component_list =NULL ; + +component_unbind_all (dev,NULL ); +} + +static const struct component_master_ops lwmi_cd_sub_master_ops = { + .bind = lwmi_cd_sub_master_bind, + .unbind = lwmi_cd_sub_master_unbind, +}; + +/** +* lwmi_cd_sub_master_add() - Register a sub-master with its sub-component +* @priv: Pointer to the sub-master capdata device private data. +* @sub_component_type: Type of the sub-component. +* +* Match the sub-component type and register the current capdata device as a +* sub-master. If the given sub-component type is CD_TYPE_NONE, mark the sub- +* component as non-existent without registering sub-master. +* +* Return: 0 on success, or an error code. +*/ +static int lwmi_cd_sub_master_add (struct lwmi_cd_priv *priv, +enum lwmi_cd_type sub_component_type) +{ +struct component_match *master_match =NULL ; +int ret; + + priv->sub_master =devm_kzalloc (&priv->wdev->dev,sizeof (*priv->sub_master),GFP_KERNEL ); +if (!priv->sub_master) +return -ENOMEM ; + +if (sub_component_type ==CD_TYPE_NONE ) { +/* The master callback will be called with NULL on bind. */ + priv->sub_master->sub_component_list =ERR_PTR (-ENODEV ); + priv->sub_master->registered = false; +return 0 ; + } +
Quoted 8 lines
drivers/platform/x86/lenovo/wmi-capdata.c static int lwmi_cd_component_bind(struct device *cd_dev, · line 363
Quoted 6 lines
drivers/platform/x86/lenovo/wmi-capdata.c +6
-0+/* +* lwmi_cd_match() needs a pointer to enum lwmi_cd_type, but on-stack +* data cannot be used here. Steal one from lwmi_cd_table. +*/ +component_match_add (&priv->wdev->dev, &master_match, lwmi_cd_match, + (void *)&lwmi_cd_table[sub_component_type].type);Is void * cast required?
Yes, this is to drop the const qualifier inherited from the array. See my reply to [PATCH v6 3/7].
Quoted 13 lines
Quoted 13 lines
drivers/platform/x86/lenovo/wmi-capdata.c +13
-0+if (IS_ERR (master_match)) +return PTR_ERR (master_match); + + ret =component_master_add_with_match (&priv->wdev->dev, &lwmi_cd_sub_master_ops, + master_match); +if (ret) +return ret; + + priv->sub_master->registered = true; +return 0 ; +} + +/**
Quoted 8 lines
drivers/platform/x86/lenovo/wmi-capdata.c static int lwmi_cd_component_bind(struct device *cd_dev, · line 382
Quoted 6 lines
drivers/platform/x86/lenovo/wmi-capdata.c +6
-0+* lwmi_cd_sub_master_del() - Unregister a sub-master if it's registered +* @priv: Pointer to the sub-master capdata device private data. +*/ +static void lwmi_cd_sub_master_del (struct lwmi_cd_priv *priv) +{ +if (priv->sub_master->registered) {Reverse the logic and return early instead.
Will reverse it. Thanks.
Thanks,
Rong
Quoted 144 lines
Quoted 144 lines
drivers/platform/x86/lenovo/wmi-capdata.c +53
-1+component_master_del (&priv->wdev->dev, &lwmi_cd_sub_master_ops); + priv->sub_master->registered = false; + } +} + +/** +* lwmi_cd_sub_component_bind() - Bind sub-component to sub-master device. +* @sc_dev: Pointer to the sub-component capdata parent device. +* @sm_dev: Pointer to the sub-master capdata parent device. +* @data: Pointer used to return the capability data list pointer. +* +* On sub-master's bind, provide a pointer to the local capdata list. +* This is used by the sub-master to call the master callback. +* +* Return: 0 +*/ +static int lwmi_cd_sub_component_bind (struct device *sc_dev, +struct device *sm_dev,void *data) +{ +struct lwmi_cd_priv *priv =dev_get_drvdata (sc_dev); +struct cd_list **listp = data; + + *listp = priv->list; + +return 0 ; +} + +static const struct component_ops lwmi_cd_sub_component_ops = { + .bind = lwmi_cd_sub_component_bind, };/** @@ -470,9 +708,28 @@ static int lwmi_cd_probe(struct wmi_device *wdev, const void *context) goto out;switch (info->type) { -case LENOVO_CAPABILITY_DATA_00 : +case LENOVO_CAPABILITY_DATA_00 : { +enum lwmi_cd_type sub_component_type =LENOVO_FAN_TEST_DATA ; +struct capdata00 capdata00; + + ret =lwmi_cd00_get_data (priv->list,LWMI_ATTR_ID_FAN_TEST , &capdata00); +if (ret || !(capdata00.supported &LWMI_SUPP_VALID )) { +dev_dbg (&wdev->dev,"capdata00 declares no fan test support\n" ); + sub_component_type =CD_TYPE_NONE ; + } + +/* Sub-master (capdata00) <-> sub-component (capdata_fan) */ + ret =lwmi_cd_sub_master_add (priv, sub_component_type); +if (ret) + goto out; + +/* Master (lenovo-wmi-other) <-> sub-master (capdata00) */ ret =component_add (&wdev->dev, &lwmi_cd_component_ops); +if (ret) +lwmi_cd_sub_master_del (priv); + goto out; + }case LENOVO_CAPABILITY_DATA_01 : priv->acpi_nb.notifier_call = lwmi_cd01_notifier_call;@@ -488,6 +745,7 @@ static int lwmi_cd_probe(struct wmi_device *wdev, const void *context) ret =component_add (&wdev->dev, &lwmi_cd_component_ops); goto out;case LENOVO_FAN_TEST_DATA : + ret =component_add (&wdev->dev, &lwmi_cd_sub_component_ops); goto out;default :return -EINVAL ;@@ -509,10 +767,13 @@ static void lwmi_cd_remove(struct wmi_device *wdev)switch (priv->list->type) {case LENOVO_CAPABILITY_DATA_00 : +lwmi_cd_sub_master_del (priv); + fallthrough;case LENOVO_CAPABILITY_DATA_01 :component_del (&wdev->dev, &lwmi_cd_component_ops);break ;case LENOVO_FAN_TEST_DATA : +component_del (&wdev->dev, &lwmi_cd_sub_component_ops);break ;default :WARN_ON (1 );drivers/platform/x86/lenovo/wmi-capdata.h +20
-0@@ -5,8 +5,20 @@#ifndef _LENOVO_WMI_CAPDATA_H_#define _LENOVO_WMI_CAPDATA_H_ +#include <linux/bits.h> #include <linux/types.h> +#define LWMI_SUPP_VALID BIT(0) +#define LWMI_SUPP_MAY_GET (LWMI_SUPP_VALID | BIT(1)) +#define LWMI_SUPP_MAY_SET (LWMI_SUPP_VALID | BIT(2)) + +#define LWMI_ATTR_DEV_ID_MASK GENMASK(31, 24) +#define LWMI_ATTR_FEAT_ID_MASK GENMASK(23, 16) +#define LWMI_ATTR_MODE_ID_MASK GENMASK(15, 8) +#define LWMI_ATTR_TYPE_ID_MASK GENMASK(7, 0) + +#define LWMI_DEVICE_ID_FAN 0x04 +struct component_match ;struct device ;struct cd_list ;@@ -32,9 +44,17 @@ struct capdata_fan {u32 max_rpm; }; +typedef void (*cd_list_cb_t )(struct device *master_dev,struct cd_list *cd_list); +struct lwmi_cd_binder {struct cd_list *cd00_list;struct cd_list *cd01_list; +/* +* May be called during or after the bind callback. +* Will be called with NULL if capdata_fan does not exist. +* The pointer is only valid in the callback; never keep it for later use! +*/ +cd_list_cb_t cd_fan_list_cb; };void lwmi_cd_match_add_all (struct device *master,struct component_match **matchptr);drivers/platform/x86/lenovo/wmi-other.c +0
-5@@ -54,11 +54,6 @@#define LWMI_FEATURE_VALUE_GET 17#define LWMI_FEATURE_VALUE_SET 18 -#define LWMI_ATTR_DEV_ID_MASK GENMASK(31, 24) -#define LWMI_ATTR_FEAT_ID_MASK GENMASK(23, 16) -#define LWMI_ATTR_MODE_ID_MASK GENMASK(15, 8) -#define LWMI_ATTR_TYPE_ID_MASK GENMASK(7, 0) -#define LWMI_OM_FW_ATTR_BASE_PATH "lenovo-wmi-other"static BLOCKING_NOTIFIER_HEAD (om_chain_head);
PATCH v6 7/7 platform/x86: lenovo-wmi-other: Add HWMON for fan reporting/tuning
In reply to Rong ZhangRegister an HWMON device for fan reporting/tuning according to Capability Data 00 (capdata00) and Fan Test Data (capdata_fan) provided by lenovo-wmi-capdata. The corresponding HWMON nodes are:
- fanX_enable: enable/disable the fan (tunable)
- fanX_input: current RPM
- fanX_max: maximum RPM
- fanX_min: minimum RPM
- fanX_target: target RPM (tunable)
Information from capdata00 and capdata_fan are used to control the visibility and constraints of HWMON attributes. Fan info from capdata00 is collected on bind, while fan info from capdata_fan is collected in a callback. Once all fan info is collected, register the HWMON device.
---
Changes in v4:
- Rework HWMON registration due to the introduction of [PATCH v4 6/7]
- Collect fan info from capdata00 and capdata_fan separately
- Use a callback to collect fan info from capdata_fan
- Trigger HWMON registration only if all fan info is collected
- Do not check 0x04050000.supported, implied by the presense of capdata_fan
- Drop Reviewed-by & Tested-by due to the changes, please review & test
Changes in v3:
- Reword documentation (thanks Derek J. Clark)
Changes in v2:
- Define 4 fan channels instead of 2 (thanks Derek J. Clark)
- Squash min/max reporting patch into this one (ditto)
- Query 0x04050000 for interface availability (ditto)
- New parameter "expose_all_fans" to skip this check
- Enforce min/max RPM constraint on set (ditto)
- New parameter "relax_fan_constraint" to disable this behavior
- Drop parameter "ignore_fan_cap", superseded by the next one
- New parameter "expose_all_fans" to expose fans w/o such data
- Assume auto mode on probe (ditto)
- Reword documentation (ditto)
- Do not register HWMON device if no fan can be exposed
- fanX_target: Return -EBUSY instead of raw target value when fan stops
--- .../wmi/devices/lenovo-wmi-other.rst | 11 + drivers/platform/x86/lenovo/Kconfig | 1 + drivers/platform/x86/lenovo/wmi-other.c | 485 +++++++++++++++++- 3 files changed, 487 insertions(+), 10 deletions(-)
Documentation/wmi/devices/lenovo-wmi-other.rst +11 -0
@@ -31,6 +31,8 @@ under the following path: /sys/class/firmware-attributes/lenovo-wmi-other/attributes/<attribute>/ +Additionally, this driver also exports attributes to HWMON. + LENOVO_CAPABILITY_DATA_00 -------------------------
@@ -39,6 +41,11 @@ WMI GUID ``362A3AFE-3D96-4665-8530-96DAD5BB300E`` The LENOVO_CAPABILITY_DATA_00 interface provides various information that does not rely on the gamezone thermal mode. +The following HWMON attributes are implemented: + - fanX_enable: enable/disable the fan (tunable) + - fanX_input: current RPM + - fanX_target: target RPM (tunable) + LENOVO_CAPABILITY_DATA_01 -------------------------
@@ -70,6 +77,10 @@ WMI GUID ``B642801B-3D21-45DE-90AE-6E86F164FB21`` The LENOVO_FAN_TEST_DATA interface provides reference data for self-test of cooling fans. +The following HWMON attributes are implemented: + - fanX_max: maximum RPM + - fanX_min: minimum RPM + WMI interface description =========================
drivers/platform/x86/lenovo/Kconfig +1 -0
@@ -263,6 +263,7 @@ config LENOVO_WMI_GAMEZONE config LENOVO_WMI_TUNING tristate "Lenovo Other Mode WMI Driver" depends on ACPI_WMI + select HWMON select FW_ATTR_CLASS select LENOVO_WMI_DATA select LENOVO_WMI_EVENTS
drivers/platform/x86/lenovo/wmi-other.c +475 -10
567 lines not on this page · raw message
Signature · 1 line
2.51.0
Ilpo Järvinen
maintainerRe: [PATCH v6 7/7] platform/x86: lenovo-wmi-other: Add HWMON for fan reporting/tuning
Quoted 162 lines · Rong Zhang
Register an HWMON device for fan reporting/tuning according to Capability Data 00 (capdata00) and Fan Test Data (
capdata_fan) provided by lenovo-wmi-capdata. The corresponding HWMON nodes are:-
fanX_enable: enable/disable the fan (tunable)
-fanX_input: current RPM
-fanX_max: maximum RPM
-fanX_min: minimum RPM
-fanX_target: target RPM (tunable)Information from capdata00 and
capdata_fanare used to control the visibility and constraints of HWMON attributes. Fan info from capdata00 is collected on bind, while fan info fromcapdata_fanis collected in a callback. Once all fan info is collected, register the HWMON device.Signed-off-by Rong Zhang <[email protected]>---
Changes in v4:
- Rework HWMON registration due to the introduction of [PATCH v4 6/7]
- Collect fan info from capdata00 andcapdata_fanseparately
- Use a callback to collect fan info fromcapdata_fan
- Trigger HWMON registration only if all fan info is collected
- Do not check 0x04050000.supported, implied by the presense ofcapdata_fan
- Drop Reviewed-by & Tested-by due to the changes, please review & testChanges in v3:
- Reword documentation (thanks Derek J. Clark)Changes in v2:
- Define 4 fan channels instead of 2 (thanks Derek J. Clark)
- Squash min/max reporting patch into this one (ditto)
- Query0x04050000for interface availability (ditto)
- New parameter "expose_all_fans" to skip this check
- Enforce min/max RPM constraint on set (ditto)
- New parameter "relax_fan_constraint" to disable this behavior
- Drop parameter "ignore_fan_cap", superseded by the next one
- New parameter "expose_all_fans" to expose fans w/o such data
- Assume auto mode on probe (ditto)
- Reword documentation (ditto)
- Do not register HWMON device if no fan can be exposed
-fanX_target: Return-EBUSYinstead of raw target value when fan stops--- .../wmi/devices/lenovo-wmi-other.rst | 11 + drivers/platform/x86/lenovo/Kconfig | 1 + drivers/platform/x86/lenovo/wmi-other.c | 485 +++++++++++++++++- 3 files changed, 487 insertions(+), 10 deletions(-)Documentation/wmi/devices/lenovo-wmi-other.rst +11
-0@@ -31,6 +31,8 @@ under the following path: /sys/class/firmware-attributes/lenovo-wmi-other/attributes/<attribute>/ +Additionally, this driver also exports attributes to HWMON. + LENOVO_CAPABILITY_DATA_00 -------------------------@@ -39,6 +41,11 @@ WMI GUID ``362A3AFE-3D96-4665-8530-96DAD5BB300E`` The LENOVO_CAPABILITY_DATA_00 interface provides various information that does not rely on the gamezone thermal mode. +The following HWMON attributes are implemented: + - fanX_enable: enable/disable the fan (tunable) + - fanX_input: current RPM + - fanX_target: target RPM (tunable) + LENOVO_CAPABILITY_DATA_01 -------------------------@@ -70,6 +77,10 @@ WMI GUID ``B642801B-3D21-45DE-90AE-6E86F164FB21`` The LENOVO_FAN_TEST_DATA interface provides reference data for self-test of cooling fans. +The following HWMON attributes are implemented: + - fanX_max: maximum RPM + - fanX_min: minimum RPM + WMI interface description =========================drivers/platform/x86/lenovo/Kconfig +1
-0@@ -263,6 +263,7 @@ config LENOVO_WMI_GAMEZONE config LENOVO_WMI_TUNING tristate "Lenovo Other Mode WMI Driver" depends on ACPI_WMI + select HWMON select FW_ATTR_CLASS select LENOVO_WMI_DATA select LENOVO_WMI_EVENTSdrivers/platform/x86/lenovo/wmi-other.c +26
-0@@ -14,7 +14,16 @@* These attributes typically don't fit anywhere else in the sysfs and are set * in Windows using one of Lenovo's multiple user applications. * +* Additionally, this driver also exports tunable fan speed RPM to HWMON. +* Min/max RPM are also provided for reference. +* * Copyright (C) 2025 Derek J. Clark <[email protected]> +* - fw_attributes +* - binding to Capability Data 01 +* +* Copyright (C) 2025 Rong Zhang <[email protected]> +* - HWMON +* - binding to Capability Data 00 and Fan */ #include <linux/acpi.h> @@ -25,6 +34,7 @@#include <linux/device.h> #include <linux/export.h> #include <linux/gfp_types.h> +#include <linux/hwmon.h> #include <linux/idr.h> #include <linux/kdev_t.h> #include <linux/kobject.h> @@ -49,12 +59,26 @@#define LWMI_FEATURE_ID_CPU_SPL 0x02#define LWMI_FEATURE_ID_CPU_FPPT 0x03 +#define LWMI_FEATURE_ID_FAN_RPM 0x03 +#define LWMI_TYPE_ID_NONE 0x00#define LWMI_FEATURE_VALUE_GET 17#define LWMI_FEATURE_VALUE_SET 18 +#define LWMI_FAN_ID_BASE 1 +#define LWMI_FAN_NR 4 +#define LWMI_FAN_ID (x) ((x) + LWMI_FAN_ID_BASE) + +#define LWMI_ATTR_ID_FAN_RPM (x) \ + (FIELD_PREP(LWMI_ATTR_DEV_ID_MASK, LWMI_DEVICE_ID_FAN) | \ + FIELD_PREP(LWMI_ATTR_FEAT_ID_MASK, LWMI_FEATURE_ID_FAN_RPM) | \ + FIELD_PREP(LWMI_ATTR_TYPE_ID_MASK, LWMI_FAN_ID(x))) + +#define LWMI_FAN_STOP_RPM 1 +#define LWMI_OM_FW_ATTR_BASE_PATH "lenovo-wmi-other" +#define LWMI_OM_HWMON_NAME "lenovo_wmi_other"static BLOCKING_NOTIFIER_HEAD (om_chain_head);static DEFINE_IDA (lwmi_om_ida);@@ -71,15 +95,439 @@ struct lwmi_om_priv {struct component_master_ops *ops;/* only valid after capdata bind */ +struct cd_list *cd00_list;struct cd_list *cd01_list; +struct device *hwmon_dev;struct device *fw_attr_dev;struct kset *fw_attr_kset;
drivers/platform/x86/lenovo/wmi-other.c struct lwmi_om_priv { · line 113
Quoted 10 lines
drivers/platform/x86/lenovo/wmi-other.c +7
-0struct notifier_block nb;struct wmi_device *wdev;int ida_id; + +struct fan_info { +u32 supported; +u32 last_target; +long min_rpm; +long max_rpm; + } fan_info[LWMI_FAN_NR ];
I personally don't like this style at all because it makes finding the type of the variable harder with grep.
Add an empty line.
Quoted 399 lines
drivers/platform/x86/lenovo/wmi-other.c +397
-0+struct { +bool capdata00_collected :1 ; +bool capdata_fan_collected :1 ; + } fan_flags; +}; + +/* +* Visibility of fan channels: +* +* +-------------------+---------+------------------+-----------------------+------------+ +* | | default | +expose_all_fans | +relax_fan_constraint | +both | +* +-------------------+---------+------------------+-----------------------+------------+ +* | canonical | RW | RW | RW+relaxed | RW+relaxed | +* +-------------------+---------+------------------+-----------------------+------------+ +* | -capdata_fan[idx] | N | RO | N | RW+relaxed | +* +-------------------+---------+------------------+-----------------------+------------+ +* +* Note: +* 1. LWMI_ATTR_ID_FAN_RPM[idx].supported is always checked before exposing a channel. +* 2. -capdata_fan implies -capdata_fan[idx]. +*/ +static bool expose_all_fans; +module_param (expose_all_fans, bool,0444 ); +MODULE_PARM_DESC (expose_all_fans, +"This option skips some capability checks and solely relies on per-channel ones " +"to expose fan attributes. Use with caution." ); + +static bool relax_fan_constraint; +module_param (relax_fan_constraint, bool,0444 ); +MODULE_PARM_DESC (relax_fan_constraint, +"Do not enforce fan RPM constraint (min/max RPM) " +"and enables fan tuning when such data is missing. " +"Enabling this may results in HWMON attributes being out-of-sync. Use with caution." ); + +/* ======== HWMON (component: lenovo-wmi-capdata 00 & fan) ======== */ + +/** +* lwmi_om_fan_get_set() - Get or set fan RPM value of specified fan +* @priv: Driver private data structure +* @channel: Fan channel index (0-based) +* @val: Pointer to value (input for set, output for get) +* @set: True to set value, false to get value +* +* Communicates with WMI interface to either retrieve current fan RPM +* or set target fan RPM. +* +* Return: 0 on success, or an error code. +*/ +static int lwmi_om_fan_get_set (struct lwmi_om_priv *priv,int channel,u32 *val,bool set) +{ +struct wmi_method_args_32 args; +u32 method_id, retval; +int err; + + method_id = set ?LWMI_FEATURE_VALUE_SET :LWMI_FEATURE_VALUE_GET ; + args.arg0 =LWMI_ATTR_ID_FAN_RPM (channel); + args.arg1 = set ? *val :0 ; + + err =lwmi_dev_evaluate_int (priv->wdev,0x0 , method_id, + (unsigned char *)&args,sizeof (args), &retval); +if (err) +return err; + +if (!set) + *val = retval; +else if (retval !=1 ) +return -EIO ; + +return 0 ; +} + +/** +* lwmi_om_hwmon_is_visible() - Determine visibility of HWMON attributes +* @drvdata: Driver private data +* @type: Sensor type +* @attr: Attribute identifier +* @channel: Channel index +* +* Determines whether an HWMON attribute should be visible in sysfs +* based on hardware capabilities and current configuration. +* +* Return: permission mode, or 0 if invisible. +*/ +static umode_t lwmi_om_hwmon_is_visible (const void *drvdata,enum hwmon_sensor_types type, +u32 attr,int channel) +{ +struct lwmi_om_priv *priv = (struct lwmi_om_priv *)drvdata; +bool visible = false; + +if (type == hwmon_fan) { +if (!(priv->fan_info[channel].supported &LWMI_SUPP_VALID )) +return 0 ; + +switch (attr) { +case hwmon_fan_enable: +case hwmon_fan_target: +if (!(priv->fan_info[channel].supported &LWMI_SUPP_MAY_SET )) +return 0 ; + +if (relax_fan_constraint || + (priv->fan_info[channel].min_rpm >=0 && + priv->fan_info[channel].max_rpm >=0 )) +return 0644 ; + +/* +* Reaching here implies expose_all_fans is set. +* See lwmi_om_hwmon_add(). +*/ +dev_warn_once (&priv->wdev->dev, +"fan tuning disabled due to missing RPM constraint\n" ); +return 0 ; +case hwmon_fan_input: + visible = priv->fan_info[channel].supported &LWMI_SUPP_MAY_GET ; +break ; +case hwmon_fan_min: + visible = priv->fan_info[channel].min_rpm >=0 ; +break ; +case hwmon_fan_max: + visible = priv->fan_info[channel].max_rpm >=0 ; +break ; + } + } + +return visible ?0444 :0 ; +} + +/** +* lwmi_om_hwmon_read() - Read HWMON sensor data +* @dev: Device pointer +* @type: Sensor type +* @attr: Attribute identifier +* @channel: Channel index +* @val: Pointer to store value +* +* Reads current sensor values from hardware through WMI interface. +* +* Return: 0 on success, or an error code. +*/ +static int lwmi_om_hwmon_read (struct device *dev,enum hwmon_sensor_types type, +u32 attr,int channel,long *val) +{ +struct lwmi_om_priv *priv =dev_get_drvdata (dev); +u32 retval =0 ; +int err; + +if (type == hwmon_fan) { +switch (attr) { +case hwmon_fan_input: + err =lwmi_om_fan_get_set (priv, channel, &retval, false); +if (err) +return err; + + *val = retval; +return 0 ; +case hwmon_fan_enable: + *val = priv->fan_info[channel].last_target !=LWMI_FAN_STOP_RPM ; +return 0 ; +case hwmon_fan_target: +if (priv->fan_info[channel].last_target ==LWMI_FAN_STOP_RPM ) +return -EBUSY ; + + *val = priv->fan_info[channel].last_target; +return 0 ; +case hwmon_fan_min: + *val = priv->fan_info[channel].min_rpm; +return 0 ; +case hwmon_fan_max: + *val = priv->fan_info[channel].max_rpm; +return 0 ; + } + } + +return -EOPNOTSUPP ; +} + +/** +* lwmi_om_hwmon_write() - Write HWMON sensor data +* @dev: Device pointer +* @type: Sensor type +* @attr: Attribute identifier +* @channel: Channel index +* @val: Value to write +* +* Writes configuration values to hardware through WMI interface. +* +* Return: 0 on success, or an error code. +*/ +static int lwmi_om_hwmon_write (struct device *dev,enum hwmon_sensor_types type, +u32 attr,int channel,long val) +{ +struct lwmi_om_priv *priv =dev_get_drvdata (dev); +u32 raw, min_rpm, max_rpm; +int err; + +if (type == hwmon_fan) { +switch (attr) { +case hwmon_fan_enable: +if (val ==0 ) + raw =LWMI_FAN_STOP_RPM ; +else if (val ==1 ) + raw =0 ;/* auto */ +else +return -EINVAL ; + + goto fan_set; +case hwmon_fan_target: +if (val ==0 ) { + raw =0 ; + goto fan_set; + } + + min_rpm = relax_fan_constraint + ?LWMI_FAN_STOP_RPM +1 + : priv->fan_info[channel].min_rpm; + max_rpm = relax_fan_constraint + ?U16_MAX + : priv->fan_info[channel].max_rpm; + +if (val < min_rpm || val > max_rpm) +return -EDOM ; + + raw = val; +fan_set: + err =lwmi_om_fan_get_set (priv, channel, &raw, true); +if (err) +return err; + + priv->fan_info[channel].last_target = raw; +return 0 ; + } + } + +return -EOPNOTSUPP ; +} + +static const struct hwmon_channel_info *const lwmi_om_hwmon_info[] = { +/* Must match LWMI_FAN_NR. */ +HWMON_CHANNEL_INFO (fan, +HWMON_F_ENABLE |HWMON_F_INPUT |HWMON_F_TARGET | +HWMON_F_MIN |HWMON_F_MAX , +HWMON_F_ENABLE |HWMON_F_INPUT |HWMON_F_TARGET | +HWMON_F_MIN |HWMON_F_MAX , +HWMON_F_ENABLE |HWMON_F_INPUT |HWMON_F_TARGET | +HWMON_F_MIN |HWMON_F_MAX , +HWMON_F_ENABLE |HWMON_F_INPUT |HWMON_F_TARGET | +HWMON_F_MIN |HWMON_F_MAX ), +NULL }; +static const struct hwmon_ops lwmi_om_hwmon_ops = { + .is_visible = lwmi_om_hwmon_is_visible, + .read = lwmi_om_hwmon_read, + .write = lwmi_om_hwmon_write, +}; + +static const struct hwmon_chip_info lwmi_om_hwmon_chip_info = { + .ops = &lwmi_om_hwmon_ops, + .info = lwmi_om_hwmon_info, +}; + +/** +* lwmi_om_hwmon_add() - Register HWMON device if all info is collected +* @priv: Driver private data +*/ +static void lwmi_om_hwmon_add (struct lwmi_om_priv *priv) +{ +int i, valid; + +if (WARN_ON (priv->hwmon_dev)) +return ; + +if (!priv->fan_flags.capdata00_collected || !priv->fan_flags.capdata_fan_collected) { +dev_dbg (&priv->wdev->dev,"HWMON registration pending (00: %d, fan: %d)\n" , + priv->fan_flags.capdata00_collected, + priv->fan_flags.capdata_fan_collected); +return ; + } + +if (expose_all_fans) +dev_warn (&priv->wdev->dev,"all fans exposed. Use with caution\n" ); + +if (relax_fan_constraint) +dev_warn (&priv->wdev->dev,"fan RPM constraint relaxed. Use with caution\n" ); + + valid =0 ; +for (i =0 ; i <LWMI_FAN_NR ; i++) { +if (!(priv->fan_info[i].supported &LWMI_SUPP_VALID )) +continue ; + + valid++; + +if (!expose_all_fans && + (priv->fan_info[i].min_rpm <0 || priv->fan_info[i].max_rpm <0 )) { +dev_dbg (&priv->wdev->dev,"missing RPM constraint for fan%d, hiding\n" , +LWMI_FAN_ID (i)); + priv->fan_info[i].supported =0 ; + valid--; + } + } + +if (valid ==0 ) { +dev_warn (&priv->wdev->dev, +"fan reporting/tuning is unsupported on this device\n" ); +return ; + } + + priv->hwmon_dev =hwmon_device_register_with_info (&priv->wdev->dev, +LWMI_OM_HWMON_NAME , priv, + &lwmi_om_hwmon_chip_info, +NULL ); +if (IS_ERR (priv->hwmon_dev)) { +dev_warn (&priv->wdev->dev,"failed to register HWMON device: %ld\n" , +PTR_ERR (priv->hwmon_dev)); + priv->hwmon_dev =NULL ; +return ; + } + +dev_dbg (&priv->wdev->dev,"registered HWMON device\n" ); +} + +/** +* lwmi_om_hwmon_remove() - Unregister HWMON device +* @priv: Driver private data +* +* Unregisters the HWMON device if applicable. +*/ +static void lwmi_om_hwmon_remove (struct lwmi_om_priv *priv) +{ +if (!priv->hwmon_dev) +return ; + +hwmon_device_unregister (priv->hwmon_dev); + priv->hwmon_dev =NULL ; +} + +/** +* lwmi_om_fan_info_init() - Initialzie fan info +* @priv: Driver private data +* +* lwmi_om_fan_info_collect_cd00() and lwmi_om_fan_info_collect_cd_fan() may be +* called in an arbitrary order. Hence, initializion must be done before. +*/ +static void lwmi_om_fan_info_init (struct lwmi_om_priv *priv) +{ +int i; + +for (i =0 ; i <LWMI_FAN_NR ; i++) { + priv->fan_info[i] = (struct fan_info ) { + .supported =0 , +/* +* Assume 0 on probe as the EC resets all fans to auto mode on (re)boot. +* +* Note that S0ix (s2idle) preserves the RPM target, so we don't need +* suspend/resume callbacks. This behavior has not been tested on S3- +* capable devices, but I doubt if such devices even have this interface. +*/ + .last_target =0 , + .min_rpm = -ENODATA , + .max_rpm = -ENODATA , + }; + } + + priv->fan_flags.capdata00_collected = false; + priv->fan_flags.capdata_fan_collected = false; +} + +/** +* lwmi_om_fan_info_collect_cd00() - Collect fan info from capdata 00 +* @priv: Driver private data +*/ +static void lwmi_om_fan_info_collect_cd00 (struct lwmi_om_priv *priv) +{ +struct capdata00 capdata00; +int i, err; + +dev_dbg (&priv->wdev->dev,"Collecting fan info from capdata00\n" ); + +for (i =0 ; i <LWMI_FAN_NR ; i++) { + err =lwmi_cd00_get_data (priv->cd00_list,LWMI_ATTR_ID_FAN_RPM (i), &capdata00); + priv->fan_info[i].supported = err ?0 : capdata00.supported; + } + + priv->fan_flags.capdata00_collected = true; +lwmi_om_hwmon_add (priv); +} + +/** +* lwmi_om_fan_info_collect_cd_fan() - Collect fan info from capdata fan +* @dev: Pointer to the lenovo-wmi-other device +* @cd_fan_list: Pointer to the capdata fan list +*/ +static void lwmi_om_fan_info_collect_cd_fan (struct device *dev,struct cd_list *cd_fan_list) +{ +struct lwmi_om_priv *priv =dev_get_drvdata (dev); +struct capdata_fan capdata_fan; +int i, err; + +dev_dbg (dev,"Collecting fan info from capdata_fan\n" ); +if (!cd_fan_list)
drivers/platform/x86/lenovo/wmi-other.c struct lwmi_om_priv { · line 523
Quoted 10 lines
drivers/platform/x86/lenovo/wmi-other.c +10
-0+ goto out; + +for (i =0 ; i <LWMI_FAN_NR ; i++) { + err =lwmi_cd_fan_get_data (cd_fan_list,LWMI_FAN_ID (i), &capdata_fan); +if (err) +continue ; + + priv->fan_info[i].min_rpm = capdata_fan.min_rpm; + priv->fan_info[i].max_rpm = capdata_fan.max_rpm; + }
Add an empty line.
Quoted 93 lines
drivers/platform/x86/lenovo/wmi-other.c +34
-10+out: + priv->fan_flags.capdata_fan_collected = true; +lwmi_om_hwmon_add (priv); +} + +/* ======== fw_attributes (component: lenovo-wmi-capdata 01) ======== */ +struct tunable_attr_01 {struct capdata01 *capdata;struct device *dev;@@ -559,32 +1007,45 @@ static void lwmi_om_fw_attr_remove(struct lwmi_om_priv *priv)device_unregister (priv->fw_attr_dev); } +/* ======== Self (master: lenovo-wmi-other) ======== */ +/** * lwmi_om_master_bind() - Bind all components of the other mode driver * @dev: The lenovo-wmi-other driver basic device. * -* Call component_bind_all to bind the lenovo-wmi-capdata01 driver to the -* lenovo-wmi-other master driver. On success, assign the capability data 01 -* list pointer to the driver data struct for later access. This pointer -* is only valid while the capdata01 interface exists. Finally, register all -* firmware attribute groups. +* Call component_bind_all to bind the lenovo-wmi-capdata devices to the +* lenovo-wmi-other master driver, with a callback to collect fan info from +* capdata_fan. On success, assign the capability data list pointers to the +* driver data struct for later access. These pointers are only valid while the +* capdata interfaces exist. Finally, collect fan info from capdata00 and +* register all firmware attribute groups. Note that the HWMON device is +* registered only if all fan info is collected. Hence, it is not registered +* here. See lwmi_om_fan_info_collect_cd00() and +* lwmi_om_fan_info_collect_cd_fan(). * * Return: 0 on success, or an error code. */ static int lwmi_om_master_bind (struct device *dev) {struct lwmi_om_priv *priv =dev_get_drvdata (dev); -struct lwmi_cd_binder binder = {0 }; +struct lwmi_cd_binder binder = { + .cd_fan_list_cb = lwmi_om_fan_info_collect_cd_fan, + };int ret; +lwmi_om_fan_info_init (priv); + ret =component_bind_all (dev, &binder);if (ret)return ret; + priv->cd00_list = binder.cd00_list; priv->cd01_list = binder.cd01_list; -if (!priv->cd01_list) +if (!priv->cd00_list || !priv->cd01_list)return -ENODEV ; +lwmi_om_fan_info_collect_cd00 (priv); +return lwmi_om_fw_attr_add (priv); }@@ -592,15 +1053,18 @@ static int lwmi_om_master_bind(struct device *dev)* lwmi_om_master_unbind() - Unbind all components of the other mode driver * @dev: The lenovo-wmi-other driver basic device * -* Unregister all capability data attribute groups. Then call -* component_unbind_all to unbind the lenovo-wmi-capdata01 driver from the -* lenovo-wmi-other master driver. Finally, free the IDA for this device. +* Unregister all firmware attribute groups and the HWMON device. Then call +* component_unbind_all to unbind lenovo-wmi-capdata devices from the +* lenovo-wmi-other master driver. */ static void lwmi_om_master_unbind (struct device *dev) {struct lwmi_om_priv *priv =dev_get_drvdata (dev);lwmi_om_fw_attr_remove (priv); + +lwmi_om_hwmon_remove (priv); +component_unbind_all (dev,NULL ); }@@ -665,5 +1129,6 @@ MODULE_IMPORT_NS("LENOVO_WMI_CD");MODULE_IMPORT_NS ("LENOVO_WMI_HELPERS" );MODULE_DEVICE_TABLE (wmi, lwmi_other_id_table);MODULE_AUTHOR ("Derek J. Clark <[email protected]>" ); +MODULE_AUTHOR ("Rong Zhang <[email protected]>" );MODULE_DESCRIPTION ("Lenovo Other Mode WMI Driver" );MODULE_LICENSE ("GPL" );
Signature · 1 line
i.
Re: [PATCH v6 7/7] platform/x86: lenovo-wmi-other: Add HWMON for fan reporting/tuning
Hi Ilpo,
Thanks for your review.
Quoted 161 lines · Ilpo Järvinen
Quoted 159 lines · Rong Zhang
Register an HWMON device for fan reporting/tuning according to Capability Data 00 (capdata00) and Fan Test Data (
capdata_fan) provided by lenovo-wmi-capdata. The corresponding HWMON nodes are:-
fanX_enable: enable/disable the fan (tunable)
-fanX_input: current RPM
-fanX_max: maximum RPM
-fanX_min: minimum RPM
-fanX_target: target RPM (tunable)Information from capdata00 and
capdata_fanare used to control the visibility and constraints of HWMON attributes. Fan info from capdata00 is collected on bind, while fan info fromcapdata_fanis collected in a callback. Once all fan info is collected, register the HWMON device.Signed-off-by Rong Zhang <[email protected]>---
Changes in v4:
- Rework HWMON registration due to the introduction of [PATCH v4 6/7]
- Collect fan info from capdata00 andcapdata_fanseparately
- Use a callback to collect fan info fromcapdata_fan
- Trigger HWMON registration only if all fan info is collected
- Do not check 0x04050000.supported, implied by the presense ofcapdata_fan
- Drop Reviewed-by & Tested-by due to the changes, please review & testChanges in v3:
- Reword documentation (thanks Derek J. Clark)Changes in v2:
- Define 4 fan channels instead of 2 (thanks Derek J. Clark)
- Squash min/max reporting patch into this one (ditto)
- Query0x04050000for interface availability (ditto)
- New parameter "expose_all_fans" to skip this check
- Enforce min/max RPM constraint on set (ditto)
- New parameter "relax_fan_constraint" to disable this behavior
- Drop parameter "ignore_fan_cap", superseded by the next one
- New parameter "expose_all_fans" to expose fans w/o such data
- Assume auto mode on probe (ditto)
- Reword documentation (ditto)
- Do not register HWMON device if no fan can be exposed
-fanX_target: Return-EBUSYinstead of raw target value when fan stops--- .../wmi/devices/lenovo-wmi-other.rst | 11 + drivers/platform/x86/lenovo/Kconfig | 1 + drivers/platform/x86/lenovo/wmi-other.c | 485 +++++++++++++++++- 3 files changed, 487 insertions(+), 10 deletions(-)Documentation/wmi/devices/lenovo-wmi-other.rst +11
-0@@ -31,6 +31,8 @@ under the following path: /sys/class/firmware-attributes/lenovo-wmi-other/attributes/<attribute>/ +Additionally, this driver also exports attributes to HWMON. + LENOVO_CAPABILITY_DATA_00 -------------------------@@ -39,6 +41,11 @@ WMI GUID ``362A3AFE-3D96-4665-8530-96DAD5BB300E`` The LENOVO_CAPABILITY_DATA_00 interface provides various information that does not rely on the gamezone thermal mode. +The following HWMON attributes are implemented: + - fanX_enable: enable/disable the fan (tunable) + - fanX_input: current RPM + - fanX_target: target RPM (tunable) + LENOVO_CAPABILITY_DATA_01 -------------------------@@ -70,6 +77,10 @@ WMI GUID ``B642801B-3D21-45DE-90AE-6E86F164FB21`` The LENOVO_FAN_TEST_DATA interface provides reference data for self-test of cooling fans. +The following HWMON attributes are implemented: + - fanX_max: maximum RPM + - fanX_min: minimum RPM + WMI interface description =========================drivers/platform/x86/lenovo/Kconfig +1
-0@@ -263,6 +263,7 @@ config LENOVO_WMI_GAMEZONE config LENOVO_WMI_TUNING tristate "Lenovo Other Mode WMI Driver" depends on ACPI_WMI + select HWMON select FW_ATTR_CLASS select LENOVO_WMI_DATA select LENOVO_WMI_EVENTSdrivers/platform/x86/lenovo/wmi-other.c +25
-0@@ -14,7 +14,16 @@* These attributes typically don't fit anywhere else in the sysfs and are set * in Windows using one of Lenovo's multiple user applications. * +* Additionally, this driver also exports tunable fan speed RPM to HWMON. +* Min/max RPM are also provided for reference. +* * Copyright (C) 2025 Derek J. Clark <[email protected]> +* - fw_attributes +* - binding to Capability Data 01 +* +* Copyright (C) 2025 Rong Zhang <[email protected]> +* - HWMON +* - binding to Capability Data 00 and Fan */ #include <linux/acpi.h> @@ -25,6 +34,7 @@#include <linux/device.h> #include <linux/export.h> #include <linux/gfp_types.h> +#include <linux/hwmon.h> #include <linux/idr.h> #include <linux/kdev_t.h> #include <linux/kobject.h> @@ -49,12 +59,26 @@#define LWMI_FEATURE_ID_CPU_SPL 0x02#define LWMI_FEATURE_ID_CPU_FPPT 0x03 +#define LWMI_FEATURE_ID_FAN_RPM 0x03 +#define LWMI_TYPE_ID_NONE 0x00#define LWMI_FEATURE_VALUE_GET 17#define LWMI_FEATURE_VALUE_SET 18 +#define LWMI_FAN_ID_BASE 1 +#define LWMI_FAN_NR 4 +#define LWMI_FAN_ID (x) ((x) + LWMI_FAN_ID_BASE) + +#define LWMI_ATTR_ID_FAN_RPM (x) \ + (FIELD_PREP(LWMI_ATTR_DEV_ID_MASK, LWMI_DEVICE_ID_FAN) | \ + FIELD_PREP(LWMI_ATTR_FEAT_ID_MASK, LWMI_FEATURE_ID_FAN_RPM) | \ + FIELD_PREP(LWMI_ATTR_TYPE_ID_MASK, LWMI_FAN_ID(x))) + +#define LWMI_FAN_STOP_RPM 1 +#define LWMI_OM_FW_ATTR_BASE_PATH "lenovo-wmi-other" +#define LWMI_OM_HWMON_NAME "lenovo_wmi_other"static BLOCKING_NOTIFIER_HEAD (om_chain_head);static DEFINE_IDA (lwmi_om_ida);@@ -71,15 +95,439 @@ struct lwmi_om_priv {struct component_master_ops *ops;/* only valid after capdata bind */ +struct cd_list *cd00_list;struct cd_list *cd01_list;
Quoted 16 lines
drivers/platform/x86/lenovo/wmi-other.c struct lwmi_om_priv { · line 113
Quoted 13 lines
drivers/platform/x86/lenovo/wmi-other.c +8
-0+struct device *hwmon_dev;struct device *fw_attr_dev;struct kset *fw_attr_kset;struct notifier_block nb;struct wmi_device *wdev;int ida_id; + +struct fan_info { +u32 supported; +u32 last_target; +long min_rpm; +long max_rpm; + } fan_info[LWMI_FAN_NR ];I personally don't like this style at all because it makes finding the type of the variable harder with grep.
Make sense. Will add a `lwmi_' prefix to the struct name. Thanks.
Quoted 1 line
Add an empty line.
Will fix this and the following ones. Thanks.
Thanks,
Rong
Quoted 505 lines
Quoted 399 lines
drivers/platform/x86/lenovo/wmi-other.c +397
-0+struct { +bool capdata00_collected :1 ; +bool capdata_fan_collected :1 ; + } fan_flags; +}; + +/* +* Visibility of fan channels: +* +* +-------------------+---------+------------------+-----------------------+------------+ +* | | default | +expose_all_fans | +relax_fan_constraint | +both | +* +-------------------+---------+------------------+-----------------------+------------+ +* | canonical | RW | RW | RW+relaxed | RW+relaxed | +* +-------------------+---------+------------------+-----------------------+------------+ +* | -capdata_fan[idx] | N | RO | N | RW+relaxed | +* +-------------------+---------+------------------+-----------------------+------------+ +* +* Note: +* 1. LWMI_ATTR_ID_FAN_RPM[idx].supported is always checked before exposing a channel. +* 2. -capdata_fan implies -capdata_fan[idx]. +*/ +static bool expose_all_fans; +module_param (expose_all_fans, bool,0444 ); +MODULE_PARM_DESC (expose_all_fans, +"This option skips some capability checks and solely relies on per-channel ones " +"to expose fan attributes. Use with caution." ); + +static bool relax_fan_constraint; +module_param (relax_fan_constraint, bool,0444 ); +MODULE_PARM_DESC (relax_fan_constraint, +"Do not enforce fan RPM constraint (min/max RPM) " +"and enables fan tuning when such data is missing. " +"Enabling this may results in HWMON attributes being out-of-sync. Use with caution." ); + +/* ======== HWMON (component: lenovo-wmi-capdata 00 & fan) ======== */ + +/** +* lwmi_om_fan_get_set() - Get or set fan RPM value of specified fan +* @priv: Driver private data structure +* @channel: Fan channel index (0-based) +* @val: Pointer to value (input for set, output for get) +* @set: True to set value, false to get value +* +* Communicates with WMI interface to either retrieve current fan RPM +* or set target fan RPM. +* +* Return: 0 on success, or an error code. +*/ +static int lwmi_om_fan_get_set (struct lwmi_om_priv *priv,int channel,u32 *val,bool set) +{ +struct wmi_method_args_32 args; +u32 method_id, retval; +int err; + + method_id = set ?LWMI_FEATURE_VALUE_SET :LWMI_FEATURE_VALUE_GET ; + args.arg0 =LWMI_ATTR_ID_FAN_RPM (channel); + args.arg1 = set ? *val :0 ; + + err =lwmi_dev_evaluate_int (priv->wdev,0x0 , method_id, + (unsigned char *)&args,sizeof (args), &retval); +if (err) +return err; + +if (!set) + *val = retval; +else if (retval !=1 ) +return -EIO ; + +return 0 ; +} + +/** +* lwmi_om_hwmon_is_visible() - Determine visibility of HWMON attributes +* @drvdata: Driver private data +* @type: Sensor type +* @attr: Attribute identifier +* @channel: Channel index +* +* Determines whether an HWMON attribute should be visible in sysfs +* based on hardware capabilities and current configuration. +* +* Return: permission mode, or 0 if invisible. +*/ +static umode_t lwmi_om_hwmon_is_visible (const void *drvdata,enum hwmon_sensor_types type, +u32 attr,int channel) +{ +struct lwmi_om_priv *priv = (struct lwmi_om_priv *)drvdata; +bool visible = false; + +if (type == hwmon_fan) { +if (!(priv->fan_info[channel].supported &LWMI_SUPP_VALID )) +return 0 ; + +switch (attr) { +case hwmon_fan_enable: +case hwmon_fan_target: +if (!(priv->fan_info[channel].supported &LWMI_SUPP_MAY_SET )) +return 0 ; + +if (relax_fan_constraint || + (priv->fan_info[channel].min_rpm >=0 && + priv->fan_info[channel].max_rpm >=0 )) +return 0644 ; + +/* +* Reaching here implies expose_all_fans is set. +* See lwmi_om_hwmon_add(). +*/ +dev_warn_once (&priv->wdev->dev, +"fan tuning disabled due to missing RPM constraint\n" ); +return 0 ; +case hwmon_fan_input: + visible = priv->fan_info[channel].supported &LWMI_SUPP_MAY_GET ; +break ; +case hwmon_fan_min: + visible = priv->fan_info[channel].min_rpm >=0 ; +break ; +case hwmon_fan_max: + visible = priv->fan_info[channel].max_rpm >=0 ; +break ; + } + } + +return visible ?0444 :0 ; +} + +/** +* lwmi_om_hwmon_read() - Read HWMON sensor data +* @dev: Device pointer +* @type: Sensor type +* @attr: Attribute identifier +* @channel: Channel index +* @val: Pointer to store value +* +* Reads current sensor values from hardware through WMI interface. +* +* Return: 0 on success, or an error code. +*/ +static int lwmi_om_hwmon_read (struct device *dev,enum hwmon_sensor_types type, +u32 attr,int channel,long *val) +{ +struct lwmi_om_priv *priv =dev_get_drvdata (dev); +u32 retval =0 ; +int err; + +if (type == hwmon_fan) { +switch (attr) { +case hwmon_fan_input: + err =lwmi_om_fan_get_set (priv, channel, &retval, false); +if (err) +return err; + + *val = retval; +return 0 ; +case hwmon_fan_enable: + *val = priv->fan_info[channel].last_target !=LWMI_FAN_STOP_RPM ; +return 0 ; +case hwmon_fan_target: +if (priv->fan_info[channel].last_target ==LWMI_FAN_STOP_RPM ) +return -EBUSY ; + + *val = priv->fan_info[channel].last_target; +return 0 ; +case hwmon_fan_min: + *val = priv->fan_info[channel].min_rpm; +return 0 ; +case hwmon_fan_max: + *val = priv->fan_info[channel].max_rpm; +return 0 ; + } + } + +return -EOPNOTSUPP ; +} + +/** +* lwmi_om_hwmon_write() - Write HWMON sensor data +* @dev: Device pointer +* @type: Sensor type +* @attr: Attribute identifier +* @channel: Channel index +* @val: Value to write +* +* Writes configuration values to hardware through WMI interface. +* +* Return: 0 on success, or an error code. +*/ +static int lwmi_om_hwmon_write (struct device *dev,enum hwmon_sensor_types type, +u32 attr,int channel,long val) +{ +struct lwmi_om_priv *priv =dev_get_drvdata (dev); +u32 raw, min_rpm, max_rpm; +int err; + +if (type == hwmon_fan) { +switch (attr) { +case hwmon_fan_enable: +if (val ==0 ) + raw =LWMI_FAN_STOP_RPM ; +else if (val ==1 ) + raw =0 ;/* auto */ +else +return -EINVAL ; + + goto fan_set; +case hwmon_fan_target: +if (val ==0 ) { + raw =0 ; + goto fan_set; + } + + min_rpm = relax_fan_constraint + ?LWMI_FAN_STOP_RPM +1 + : priv->fan_info[channel].min_rpm; + max_rpm = relax_fan_constraint + ?U16_MAX + : priv->fan_info[channel].max_rpm; + +if (val < min_rpm || val > max_rpm) +return -EDOM ; + + raw = val; +fan_set: + err =lwmi_om_fan_get_set (priv, channel, &raw, true); +if (err) +return err; + + priv->fan_info[channel].last_target = raw; +return 0 ; + } + } + +return -EOPNOTSUPP ; +} + +static const struct hwmon_channel_info *const lwmi_om_hwmon_info[] = { +/* Must match LWMI_FAN_NR. */ +HWMON_CHANNEL_INFO (fan, +HWMON_F_ENABLE |HWMON_F_INPUT |HWMON_F_TARGET | +HWMON_F_MIN |HWMON_F_MAX , +HWMON_F_ENABLE |HWMON_F_INPUT |HWMON_F_TARGET | +HWMON_F_MIN |HWMON_F_MAX , +HWMON_F_ENABLE |HWMON_F_INPUT |HWMON_F_TARGET | +HWMON_F_MIN |HWMON_F_MAX , +HWMON_F_ENABLE |HWMON_F_INPUT |HWMON_F_TARGET | +HWMON_F_MIN |HWMON_F_MAX ), +NULL }; +static const struct hwmon_ops lwmi_om_hwmon_ops = { + .is_visible = lwmi_om_hwmon_is_visible, + .read = lwmi_om_hwmon_read, + .write = lwmi_om_hwmon_write, +}; + +static const struct hwmon_chip_info lwmi_om_hwmon_chip_info = { + .ops = &lwmi_om_hwmon_ops, + .info = lwmi_om_hwmon_info, +}; + +/** +* lwmi_om_hwmon_add() - Register HWMON device if all info is collected +* @priv: Driver private data +*/ +static void lwmi_om_hwmon_add (struct lwmi_om_priv *priv) +{ +int i, valid; + +if (WARN_ON (priv->hwmon_dev)) +return ; + +if (!priv->fan_flags.capdata00_collected || !priv->fan_flags.capdata_fan_collected) { +dev_dbg (&priv->wdev->dev,"HWMON registration pending (00: %d, fan: %d)\n" , + priv->fan_flags.capdata00_collected, + priv->fan_flags.capdata_fan_collected); +return ; + } + +if (expose_all_fans) +dev_warn (&priv->wdev->dev,"all fans exposed. Use with caution\n" ); + +if (relax_fan_constraint) +dev_warn (&priv->wdev->dev,"fan RPM constraint relaxed. Use with caution\n" ); + + valid =0 ; +for (i =0 ; i <LWMI_FAN_NR ; i++) { +if (!(priv->fan_info[i].supported &LWMI_SUPP_VALID )) +continue ; + + valid++; + +if (!expose_all_fans && + (priv->fan_info[i].min_rpm <0 || priv->fan_info[i].max_rpm <0 )) { +dev_dbg (&priv->wdev->dev,"missing RPM constraint for fan%d, hiding\n" , +LWMI_FAN_ID (i)); + priv->fan_info[i].supported =0 ; + valid--; + } + } + +if (valid ==0 ) { +dev_warn (&priv->wdev->dev, +"fan reporting/tuning is unsupported on this device\n" ); +return ; + } + + priv->hwmon_dev =hwmon_device_register_with_info (&priv->wdev->dev, +LWMI_OM_HWMON_NAME , priv, + &lwmi_om_hwmon_chip_info, +NULL ); +if (IS_ERR (priv->hwmon_dev)) { +dev_warn (&priv->wdev->dev,"failed to register HWMON device: %ld\n" , +PTR_ERR (priv->hwmon_dev)); + priv->hwmon_dev =NULL ; +return ; + } + +dev_dbg (&priv->wdev->dev,"registered HWMON device\n" ); +} + +/** +* lwmi_om_hwmon_remove() - Unregister HWMON device +* @priv: Driver private data +* +* Unregisters the HWMON device if applicable. +*/ +static void lwmi_om_hwmon_remove (struct lwmi_om_priv *priv) +{ +if (!priv->hwmon_dev) +return ; + +hwmon_device_unregister (priv->hwmon_dev); + priv->hwmon_dev =NULL ; +} + +/** +* lwmi_om_fan_info_init() - Initialzie fan info +* @priv: Driver private data +* +* lwmi_om_fan_info_collect_cd00() and lwmi_om_fan_info_collect_cd_fan() may be +* called in an arbitrary order. Hence, initializion must be done before. +*/ +static void lwmi_om_fan_info_init (struct lwmi_om_priv *priv) +{ +int i; + +for (i =0 ; i <LWMI_FAN_NR ; i++) { + priv->fan_info[i] = (struct fan_info ) { + .supported =0 , +/* +* Assume 0 on probe as the EC resets all fans to auto mode on (re)boot. +* +* Note that S0ix (s2idle) preserves the RPM target, so we don't need +* suspend/resume callbacks. This behavior has not been tested on S3- +* capable devices, but I doubt if such devices even have this interface. +*/ + .last_target =0 , + .min_rpm = -ENODATA , + .max_rpm = -ENODATA , + }; + } + + priv->fan_flags.capdata00_collected = false; + priv->fan_flags.capdata_fan_collected = false; +} + +/** +* lwmi_om_fan_info_collect_cd00() - Collect fan info from capdata 00 +* @priv: Driver private data +*/ +static void lwmi_om_fan_info_collect_cd00 (struct lwmi_om_priv *priv) +{ +struct capdata00 capdata00; +int i, err; + +dev_dbg (&priv->wdev->dev,"Collecting fan info from capdata00\n" ); + +for (i =0 ; i <LWMI_FAN_NR ; i++) { + err =lwmi_cd00_get_data (priv->cd00_list,LWMI_ATTR_ID_FAN_RPM (i), &capdata00); + priv->fan_info[i].supported = err ?0 : capdata00.supported; + } + + priv->fan_flags.capdata00_collected = true; +lwmi_om_hwmon_add (priv); +} + +/** +* lwmi_om_fan_info_collect_cd_fan() - Collect fan info from capdata fan +* @dev: Pointer to the lenovo-wmi-other device +* @cd_fan_list: Pointer to the capdata fan list +*/ +static void lwmi_om_fan_info_collect_cd_fan (struct device *dev,struct cd_list *cd_fan_list) +{ +struct lwmi_om_priv *priv =dev_get_drvdata (dev); +struct capdata_fan capdata_fan; +int i, err; + +dev_dbg (dev,"Collecting fan info from capdata_fan\n" ); +if (!cd_fan_list)drivers/platform/x86/lenovo/wmi-other.c struct lwmi_om_priv { · line 523
Quoted 10 lines
drivers/platform/x86/lenovo/wmi-other.c +10
-0+ goto out; + +for (i =0 ; i <LWMI_FAN_NR ; i++) { + err =lwmi_cd_fan_get_data (cd_fan_list,LWMI_FAN_ID (i), &capdata_fan); +if (err) +continue ; + + priv->fan_info[i].min_rpm = capdata_fan.min_rpm; + priv->fan_info[i].max_rpm = capdata_fan.max_rpm; + }Add an empty line.
Quoted 93 lines
drivers/platform/x86/lenovo/wmi-other.c +34
-10+out: + priv->fan_flags.capdata_fan_collected = true; +lwmi_om_hwmon_add (priv); +} + +/* ======== fw_attributes (component: lenovo-wmi-capdata 01) ======== */ +struct tunable_attr_01 {struct capdata01 *capdata;struct device *dev;@@ -559,32 +1007,45 @@ static void lwmi_om_fw_attr_remove(struct lwmi_om_priv *priv)device_unregister (priv->fw_attr_dev); } +/* ======== Self (master: lenovo-wmi-other) ======== */ +/** * lwmi_om_master_bind() - Bind all components of the other mode driver * @dev: The lenovo-wmi-other driver basic device. * -* Call component_bind_all to bind the lenovo-wmi-capdata01 driver to the -* lenovo-wmi-other master driver. On success, assign the capability data 01 -* list pointer to the driver data struct for later access. This pointer -* is only valid while the capdata01 interface exists. Finally, register all -* firmware attribute groups. +* Call component_bind_all to bind the lenovo-wmi-capdata devices to the +* lenovo-wmi-other master driver, with a callback to collect fan info from +* capdata_fan. On success, assign the capability data list pointers to the +* driver data struct for later access. These pointers are only valid while the +* capdata interfaces exist. Finally, collect fan info from capdata00 and +* register all firmware attribute groups. Note that the HWMON device is +* registered only if all fan info is collected. Hence, it is not registered +* here. See lwmi_om_fan_info_collect_cd00() and +* lwmi_om_fan_info_collect_cd_fan(). * * Return: 0 on success, or an error code. */ static int lwmi_om_master_bind (struct device *dev) {struct lwmi_om_priv *priv =dev_get_drvdata (dev); -struct lwmi_cd_binder binder = {0 }; +struct lwmi_cd_binder binder = { + .cd_fan_list_cb = lwmi_om_fan_info_collect_cd_fan, + };int ret; +lwmi_om_fan_info_init (priv); + ret =component_bind_all (dev, &binder);if (ret)return ret; + priv->cd00_list = binder.cd00_list; priv->cd01_list = binder.cd01_list; -if (!priv->cd01_list) +if (!priv->cd00_list || !priv->cd01_list)return -ENODEV ; +lwmi_om_fan_info_collect_cd00 (priv); +return lwmi_om_fw_attr_add (priv); }@@ -592,15 +1053,18 @@ static int lwmi_om_master_bind(struct device *dev)* lwmi_om_master_unbind() - Unbind all components of the other mode driver * @dev: The lenovo-wmi-other driver basic device * -* Unregister all capability data attribute groups. Then call -* component_unbind_all to unbind the lenovo-wmi-capdata01 driver from the -* lenovo-wmi-other master driver. Finally, free the IDA for this device. +* Unregister all firmware attribute groups and the HWMON device. Then call +* component_unbind_all to unbind lenovo-wmi-capdata devices from the +* lenovo-wmi-other master driver. */ static void lwmi_om_master_unbind (struct device *dev) {struct lwmi_om_priv *priv =dev_get_drvdata (dev);lwmi_om_fw_attr_remove (priv); + +lwmi_om_hwmon_remove (priv); +component_unbind_all (dev,NULL ); }@@ -665,5 +1129,6 @@ MODULE_IMPORT_NS("LENOVO_WMI_CD");MODULE_IMPORT_NS ("LENOVO_WMI_HELPERS" );MODULE_DEVICE_TABLE (wmi, lwmi_other_id_table);MODULE_AUTHOR ("Derek J. Clark <[email protected]>" ); +MODULE_AUTHOR ("Rong Zhang <[email protected]>" );MODULE_DESCRIPTION ("Lenovo Other Mode WMI Driver" );MODULE_LICENSE ("GPL" );
Ilpo Järvinen
maintainerRe: [PATCH v6 7/7] platform/x86: lenovo-wmi-other: Add HWMON for fan reporting/tuning
Quoted 183 lines · Rong Zhang
Hi Ilpo,
Thanks for your review.
Quoted 161 lines · Ilpo Järvinen
Quoted 159 lines · Rong Zhang
Register an HWMON device for fan reporting/tuning according to Capability Data 00 (capdata00) and Fan Test Data (
capdata_fan) provided by lenovo-wmi-capdata. The corresponding HWMON nodes are:-
fanX_enable: enable/disable the fan (tunable)
-fanX_input: current RPM
-fanX_max: maximum RPM
-fanX_min: minimum RPM
-fanX_target: target RPM (tunable)Information from capdata00 and
capdata_fanare used to control the visibility and constraints of HWMON attributes. Fan info from capdata00 is collected on bind, while fan info fromcapdata_fanis collected in a callback. Once all fan info is collected, register the HWMON device.Signed-off-by Rong Zhang <[email protected]>---
Changes in v4:
- Rework HWMON registration due to the introduction of [PATCH v4 6/7]
- Collect fan info from capdata00 andcapdata_fanseparately
- Use a callback to collect fan info fromcapdata_fan
- Trigger HWMON registration only if all fan info is collected
- Do not check 0x04050000.supported, implied by the presense ofcapdata_fan
- Drop Reviewed-by & Tested-by due to the changes, please review & testChanges in v3:
- Reword documentation (thanks Derek J. Clark)Changes in v2:
- Define 4 fan channels instead of 2 (thanks Derek J. Clark)
- Squash min/max reporting patch into this one (ditto)
- Query0x04050000for interface availability (ditto)
- New parameter "expose_all_fans" to skip this check
- Enforce min/max RPM constraint on set (ditto)
- New parameter "relax_fan_constraint" to disable this behavior
- Drop parameter "ignore_fan_cap", superseded by the next one
- New parameter "expose_all_fans" to expose fans w/o such data
- Assume auto mode on probe (ditto)
- Reword documentation (ditto)
- Do not register HWMON device if no fan can be exposed
-fanX_target: Return-EBUSYinstead of raw target value when fan stops--- .../wmi/devices/lenovo-wmi-other.rst | 11 + drivers/platform/x86/lenovo/Kconfig | 1 + drivers/platform/x86/lenovo/wmi-other.c | 485 +++++++++++++++++- 3 files changed, 487 insertions(+), 10 deletions(-)Documentation/wmi/devices/lenovo-wmi-other.rst +11
-0@@ -31,6 +31,8 @@ under the following path: /sys/class/firmware-attributes/lenovo-wmi-other/attributes/<attribute>/ +Additionally, this driver also exports attributes to HWMON. + LENOVO_CAPABILITY_DATA_00 -------------------------@@ -39,6 +41,11 @@ WMI GUID ``362A3AFE-3D96-4665-8530-96DAD5BB300E`` The LENOVO_CAPABILITY_DATA_00 interface provides various information that does not rely on the gamezone thermal mode. +The following HWMON attributes are implemented: + - fanX_enable: enable/disable the fan (tunable) + - fanX_input: current RPM + - fanX_target: target RPM (tunable) + LENOVO_CAPABILITY_DATA_01 -------------------------@@ -70,6 +77,10 @@ WMI GUID ``B642801B-3D21-45DE-90AE-6E86F164FB21`` The LENOVO_FAN_TEST_DATA interface provides reference data for self-test of cooling fans. +The following HWMON attributes are implemented: + - fanX_max: maximum RPM + - fanX_min: minimum RPM + WMI interface description =========================drivers/platform/x86/lenovo/Kconfig +1
-0@@ -263,6 +263,7 @@ config LENOVO_WMI_GAMEZONE config LENOVO_WMI_TUNING tristate "Lenovo Other Mode WMI Driver" depends on ACPI_WMI + select HWMON select FW_ATTR_CLASS select LENOVO_WMI_DATA select LENOVO_WMI_EVENTSdrivers/platform/x86/lenovo/wmi-other.c +25
-0@@ -14,7 +14,16 @@* These attributes typically don't fit anywhere else in the sysfs and are set * in Windows using one of Lenovo's multiple user applications. * +* Additionally, this driver also exports tunable fan speed RPM to HWMON. +* Min/max RPM are also provided for reference. +* * Copyright (C) 2025 Derek J. Clark <[email protected]> +* - fw_attributes +* - binding to Capability Data 01 +* +* Copyright (C) 2025 Rong Zhang <[email protected]> +* - HWMON +* - binding to Capability Data 00 and Fan */ #include <linux/acpi.h> @@ -25,6 +34,7 @@#include <linux/device.h> #include <linux/export.h> #include <linux/gfp_types.h> +#include <linux/hwmon.h> #include <linux/idr.h> #include <linux/kdev_t.h> #include <linux/kobject.h> @@ -49,12 +59,26 @@#define LWMI_FEATURE_ID_CPU_SPL 0x02#define LWMI_FEATURE_ID_CPU_FPPT 0x03 +#define LWMI_FEATURE_ID_FAN_RPM 0x03 +#define LWMI_TYPE_ID_NONE 0x00#define LWMI_FEATURE_VALUE_GET 17#define LWMI_FEATURE_VALUE_SET 18 +#define LWMI_FAN_ID_BASE 1 +#define LWMI_FAN_NR 4 +#define LWMI_FAN_ID (x) ((x) + LWMI_FAN_ID_BASE) + +#define LWMI_ATTR_ID_FAN_RPM (x) \ + (FIELD_PREP(LWMI_ATTR_DEV_ID_MASK, LWMI_DEVICE_ID_FAN) | \ + FIELD_PREP(LWMI_ATTR_FEAT_ID_MASK, LWMI_FEATURE_ID_FAN_RPM) | \ + FIELD_PREP(LWMI_ATTR_TYPE_ID_MASK, LWMI_FAN_ID(x))) + +#define LWMI_FAN_STOP_RPM 1 +#define LWMI_OM_FW_ATTR_BASE_PATH "lenovo-wmi-other" +#define LWMI_OM_HWMON_NAME "lenovo_wmi_other"static BLOCKING_NOTIFIER_HEAD (om_chain_head);static DEFINE_IDA (lwmi_om_ida);@@ -71,15 +95,439 @@ struct lwmi_om_priv {struct component_master_ops *ops;/* only valid after capdata bind */ +struct cd_list *cd00_list;struct cd_list *cd01_list;Quoted 16 lines
drivers/platform/x86/lenovo/wmi-other.c struct lwmi_om_priv { · line 113
Quoted 13 lines
drivers/platform/x86/lenovo/wmi-other.c +8
-0+struct device *hwmon_dev;struct device *fw_attr_dev;struct kset *fw_attr_kset;struct notifier_block nb;struct wmi_device *wdev;int ida_id; + +struct fan_info { +u32 supported; +u32 last_target; +long min_rpm; +long max_rpm; + } fan_info[LWMI_FAN_NR ];I personally don't like this style at all because it makes finding the type of the variable harder with grep.
Quoted 1 line
Make sense. Will add a `lwmi_' prefix to the struct name. Thanks.
While having prefix is good too, I was more referring to naming it at the closing brace line, I'd prefer to have it on a separate line (which shows type, staticness easily with grep):
struct lwmi_fan_info fan_info[LWMI_FAN_NR];
I see you placed it into priv in v7 which is better anyway.
Signature · 1 line
i.