arm64: dts: sprd: sc9860: Simplify clock nodes
Subsystems (2)
Rob Herring (Arm)
maintainerPATCH v2 1/1 arm64: dts: sprd: sc9860: Simplify clock nodes
The various "syscon" nodes in SC9860 are only referenced by clock provider nodes in a 1:1 relationship, and nothing else references the "syscon" nodes. There's no apparent reason for this split. The 2 nodes can simply be merged into 1 node. The clock driver has supported using either "reg" or "sprd,syscon" to access registers from the start, so there shouldn't be any compatibility issues.
With this, DT schema warnings for missing a specific compatible with "syscon" and non-MMIO devices on "simple-bus" are fixed.
---
Arnd, Please apply directly.
v2:
- Correct some indentation
--- arch/arm64/boot/dts/sprd/sc9860.dtsi | 62 ---------------------------- arch/arm64/boot/dts/sprd/whale2.dtsi | 54 ++++++++++++++++-------- 2 files changed, 36 insertions(+), 80 deletions(-)
arch/arm64/boot/dts/sprd/sc9860.dtsi +0 -62
@@ -184,20 +184,6 @@ gic: interrupt-controller@12001000 { | IRQ_TYPE_LEVEL_HIGH)>; }; - pmu_gate: pmu-gate { - compatible = "sprd,sc9860-pmu-gate"; - sprd,syscon = <&pmu_regs>; /* 0x402b0000 */ - clocks = <&ext_26m>; - #clock-cells = <1>; - }; - - pll: pll { - compatible = "sprd,sc9860-pll"; - sprd,syscon = <&ana_regs>; /* 0x40400000 */ - clocks = <&pmu_gate 0>; - #clock-cells = <1>; - }; - ap_clk: clock-controller@20000000 { compatible = "sprd,sc9860-ap-clk"; reg = <0 0x20000000 0 0x400>;
@@ -214,19 +200,6 @@ aon_prediv: aon-prediv@402d0000 { #clock-cells = <1>; }; - apahb_gate: apahb-gate { - compatible = "sprd,sc9860-apahb-gate"; - sprd,syscon = <&ap_ahb_regs>; /* 0x20210000 */ - clocks = <&aon_prediv 0>; - #clock-cells = <1>; - }; - - aon_gate: aon-gate { - compatible = "sprd,sc9860-aon-gate"; - sprd,syscon = <&aon_regs>; /* 0x402e0000 */ - clocks = <&aon_prediv 0>; - #clock-cells = <1>; - }; aonsecure_clk: clock-controller@40880000 { compatible = "sprd,sc9860-aonsecure-clk";
@@ -235,13 +208,6 @@ aonsecure_clk: clock-controller@40880000 { #clock-cells = <1>; }; - agcp_gate: agcp-gate { - compatible = "sprd,sc9860-agcp-gate"; - sprd,syscon = <&agcp_regs>; /* 0x415e0000 */ - clocks = <&aon_prediv 0>; - #clock-cells = <1>; - }; - gpu_clk: clock-controller@60200000 { compatible = "sprd,sc9860-gpu-clk"; reg = <0 0x60200000 0 0x400>;
@@ -256,13 +222,6 @@ vsp_clk: clock-controller@61000000 { #clock-cells = <1>; }; - vsp_gate: vsp-gate { - compatible = "sprd,sc9860-vsp-gate"; - sprd,syscon = <&vsp_regs>; /* 0x61100000 */ - clocks = <&vsp_clk 0>; - #clock-cells = <1>; - }; - cam_clk: clock-controller@62000000 { compatible = "sprd,sc9860-cam-clk"; reg = <0 0x62000000 0 0x4000>;
@@ -270,13 +229,6 @@ cam_clk: clock-controller@62000000 { #clock-cells = <1>; }; - cam_gate: cam-gate { - compatible = "sprd,sc9860-cam-gate"; - sprd,syscon = <&cam_regs>; /* 0x62100000 */ - clocks = <&cam_clk 0>; - #clock-cells = <1>; - }; - disp_clk: clock-controller@63000000 { compatible = "sprd,sc9860-disp-clk"; reg = <0 0x63000000 0 0x400>;
@@ -284,20 +236,6 @@ disp_clk: clock-controller@63000000 { #clock-cells = <1>; }; - disp_gate: disp-gate { - compatible = "sprd,sc9860-disp-gate"; - sprd,syscon = <&disp_regs>; /* 0x63100000 */ - clocks = <&disp_clk 0>; - #clock-cells = <1>; - }; - - apapb_gate: apapb-gate { - compatible = "sprd,sc9860-apapb-gate"; - sprd,syscon = <&ap_apb_regs>; /* 0x70b00000 */ - clocks = <&ap_clk 0>; - #clock-cells = <1>; - }; - funnel@10001000 { /* SoC Funnel */ compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; reg = <0 0x10001000 0 0x1000>;
arch/arm64/boot/dts/sprd/whale2.dtsi +36 -18
85 lines not on this page · raw message
Signature · 1 line
2.51.0
This patch was applied to soc/soc.git (for-next) by Arnd Bergmann <[email protected]>:
Hello:
This patch was applied to soc/soc.git (for-next)
by Arnd Bergmann <[email protected]>:
Quoted 8 lines · On Mon, 24 Nov 2025 15:00:31 -0600 you wrote:
The various "syscon" nodes in SC9860 are only referenced by clock provider nodes in a 1:1 relationship, and nothing else references the "syscon" nodes. There's no apparent reason for this split. The 2 nodes can simply be merged into 1 node. The clock driver has supported using either "reg" or "sprd,syscon" to access registers from the start, so there shouldn't be any compatibility issues.
[...]
Here is the summary with links:
- [v2] arm64: dts: sprd: sc9860: Simplify clock nodes
https://git.kernel.org/soc/soc/c/d86a4e645859
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html