Skip to contentSkip to conversation

clk: Disable KUNIT_UML_PCI

PATCH Superseded Peng Fan (OSS) 4 participants 5 messages Nov 28, 2025 – Dec 16, 2025 Common clk

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 clk: Disable KUNIT_UML_PCI

From: Peng Fan <[email protected]>

commit 031cdd3bc3f3 ("kunit: Enable PCI on UML without triggering WARN()") causes clk gate test fail. Deselect KUNIT_UML_PCI to avoid the failure. Dump as below:

WARNING: CPU: 0 PID: 227 at lib/logic_iomem.c:141 __raw_readl+0xac/0xe0
CPU: 0 UID: 0 PID: 227 Comm: kunit_try_catch Tainted: G
Tainted: [N]=TEST
Stack:
 a0883d00 00000001 00000000 ffffff00
 603ef142 60044832 6002598b 00000000
 00000000 600211b3 00000001 00000000
Call Trace:
 [<6032534c>] ? __raw_readl+0xac/0xe0
 [<60044832>] ? dump_stack_lvl+0x57/0x73
 [<6002598b>] ? _printk+0x0/0x61
 [<600211b3>] ? __warn.cold+0x61/0xeb
 [<600212cc>] ? warn_slowpath_fmt+0x8f/0x9c
 [<6002123d>] ? warn_slowpath_fmt+0x0/0x9c
 [<6032534c>] ? __raw_readl+0xac/0xe0
 [<6002123d>] ? warn_slowpath_fmt+0x0/0x9c
 [<6029e2ad>] ? clk_gate_endisable+0xcd/0x110
 [<6029e315>] ? clk_gate_enable+0x15/0x20
 [<6028795e>] ? clk_core_enable+0x6e/0xf0
 [<60289f1f>] ? clk_enable+0x4f/0xa0
 [<602a06af>] ? clk_gate_test_enable+0xbf/0x360
 [<60053df9>] ? os_nsecs+0x29/0x40
 [<600cd300>] ? ktime_get_ts64+0x0/0x130
 [<600816c0>] ? to_kthread+0x0/0x50
 [<602507bb>] ? kunit_try_run_case+0x7b/0x100
 [<600816c0>] ? to_kthread+0x0/0x50
 [<60252aa0>] ? kunit_generic_run_threadfn_adapter+0x0/0x30
 [<60252ab2>] ? kunit_generic_run_threadfn_adapter+0x12/0x30
 [<60082091>] ? kthread+0xf1/0x270
 [<60047591>] ? new_thread_handler+0x41/0x60
---[ end trace 0000000000000000 ]---
Fixes 031cdd3bc3f3 ("kunit: Enable PCI on UML without triggering WARN()")
---
 drivers/clk/.kunitconfig | 1 +
 1 file changed, 1 insertion(+)
drivers/clk/.kunitconfig +1 -0
index 08e26137f3d9..4697bf9fb949 100644
@@ -1,4 +1,5 @@
 CONFIG_KUNIT=y
+CONFIG_KUNIT_UML_PCI=n
 CONFIG_OF=y
 CONFIG_OF_OVERLAY=y
 CONFIG_COMMON_CLK=y

---
base-commit: 765e56e41a5af2d456ddda6cbd617b9d3295ab4e
change-id: 20251128-clk-03ac129ce08a

Best regards,

Signature · 1 line
Peng Fan <[email protected]>
#1 lore raw
Quoted 3 lines

commit 031cdd3bc3f3 ("kunit: Enable PCI on UML without triggering WARN()") causes clk gate test fail. Deselect KUNIT_UML_PCI to avoid the failure.

While probably _true_ that this "caused" it, it also seems a bit dishonest to blame it on that without giving any information as to why the clk tests trigger some edge case or so?

FTR, the warning only happens when you pass an address to ioread(), iowrite() or similar that wasn't obtained from ioremap(). Which ought to not be valid, and I'm pretty convinced that a unit test should never even end up here.

So no, I don't think this is a valid change, I think the clk unit tests that end up doing readl() in the gate code for a non-existing device are broken.

johannes

#2 lore raw
Quoted 9 lines · Johannes Berg
Quoted 4 lines

commit 031cdd3bc3f3 ("kunit: Enable PCI on UML without triggering WARN()") causes clk gate test fail. Deselect KUNIT_UML_PCI to avoid the failure.

While probably _true_ that this "caused" it, it also seems a bit dishonest to blame it on that without giving any information as to why the clk tests trigger some edge case or so?

Quoted 8 lines

FTR, the warning only happens when you pass an address to ioread(), iowrite() or similar that wasn't obtained from ioremap(). Which ought to not be valid, and I'm pretty convinced that a unit test should never even end up here.

So no, I don't think this is a valid change, I think the clk unit tests that end up doing readl() in the gate code for a non-existing device are broken.

Yeah, the correct solution here is definitely to rework the test to not do this.

Unfortunately, I don't think there's a really pleasant way of faking these in KUnit tests, but a path forward might involve logic_iomem (possibly with some changes). Otherwise, reworking the test to put these writes behind a function which can be mocked would be nice.

Ultimately, I don't have a problem with us disabling this in the meantime for clk tests -- ultimately it's up to clk folks what their test config is, and having tests which always fail isn't great -- but it'd be nice to eliminate the cast-a-random-pointer-to-iomem hacks in tests.

Cheers,
-- David

author
#3 lore raw

Hi David, Johannes

Quoted 26 lines · David Gow
Quoted 9 lines · Johannes Berg
Quoted 4 lines

commit 031cdd3bc3f3 ("kunit: Enable PCI on UML without triggering WARN()") causes clk gate test fail. Deselect KUNIT_UML_PCI to avoid the failure.

While probably _true_ that this "caused" it, it also seems a bit dishonest to blame it on that without giving any information as to why the clk tests trigger some edge case or so?

Quoted 8 lines

FTR, the warning only happens when you pass an address to ioread(), iowrite() or similar that wasn't obtained from ioremap(). Which ought to not be valid, and I'm pretty convinced that a unit test should never even end up here.

So no, I don't think this is a valid change, I think the clk unit tests that end up doing readl() in the gate code for a non-existing device are broken.

Yeah, the correct solution here is definitely to rework the test to not do this.

Unfortunately, I don't think there's a really pleasant way of faking these in KUnit tests, but a path forward might involve logic_iomem (possibly with some changes). Otherwise, reworking the test to put these writes behind a function which can be mocked would be nice.

Quoted 5 lines

Ultimately, I don't have a problem with us disabling this in the meantime for clk tests -- ultimately it's up to clk folks what their test config is, and having tests which always fail isn't great -- but it'd be nice to eliminate the cast-a-random-pointer-to-iomem hacks in tests.

Sorry for late reply. Is it an acceptable short term fix for you if I drop the fixes tag?

Thanks,
Peng

Quoted 3 lines

Cheers,
-- David

Reviewed-by on v1 1/1
#4 lore raw
In reply to Peng Fan (OSS)
Quoted 4 lines · Peng Fan (OSS)

From: Peng Fan <[email protected]>

commit 031cdd3bc3f3 ("kunit: Enable PCI on UML without triggering WARN()") causes clk gate test fail. Deselect KUNIT_UML_PCI to avoid the failure.

One relevant bit for the commit message is that CONFIG_UML_PCI_OVER_VIRTIO is also disabled in this .kunitconfig for the same reason. See commit f84a9e965833 ("clk: explicitly disable CONFIG_UML_PCI_OVER_VIRTIO in .kunitconfig"). The commit itself declares itself to be a "short-term fix". But it is from 2022. Maybe we can fix this properly at some point instead of papering over it.

Quoted 33 lines

Dump as below:

WARNING: CPU: 0 PID: 227 at lib/logic_iomem.c:141 __raw_readl+0xac/0xe0
CPU: 0 UID: 0 PID: 227 Comm: kunit_try_catch Tainted: G
Tainted: [N]=TEST
Stack:
 a0883d00 00000001 00000000 ffffff00
 603ef142 60044832 6002598b 00000000
 00000000 600211b3 00000001 00000000
Call Trace:
 [<6032534c>] ? __raw_readl+0xac/0xe0
 [<60044832>] ? dump_stack_lvl+0x57/0x73
 [<6002598b>] ? _printk+0x0/0x61
 [<600211b3>] ? __warn.cold+0x61/0xeb
 [<600212cc>] ? warn_slowpath_fmt+0x8f/0x9c
 [<6002123d>] ? warn_slowpath_fmt+0x0/0x9c
 [<6032534c>] ? __raw_readl+0xac/0xe0
 [<6002123d>] ? warn_slowpath_fmt+0x0/0x9c
 [<6029e2ad>] ? clk_gate_endisable+0xcd/0x110
 [<6029e315>] ? clk_gate_enable+0x15/0x20
 [<6028795e>] ? clk_core_enable+0x6e/0xf0
 [<60289f1f>] ? clk_enable+0x4f/0xa0
 [<602a06af>] ? clk_gate_test_enable+0xbf/0x360
 [<60053df9>] ? os_nsecs+0x29/0x40
 [<600cd300>] ? ktime_get_ts64+0x0/0x130
 [<600816c0>] ? to_kthread+0x0/0x50
 [<602507bb>] ? kunit_try_run_case+0x7b/0x100
 [<600816c0>] ? to_kthread+0x0/0x50
 [<60252aa0>] ? kunit_generic_run_threadfn_adapter+0x0/0x30
 [<60252ab2>] ? kunit_generic_run_threadfn_adapter+0x12/0x30
 [<60082091>] ? kthread+0xf1/0x270
 [<60047591>] ? new_thread_handler+0x41/0x60
---[ end trace 0000000000000000 ]---
Quoted 2 lines
Fixes 031cdd3bc3f3 ("kunit: Enable PCI on UML without triggering WARN()")
Quoted 9 lines
---
 drivers/clk/.kunitconfig | 1 +
 1 file changed, 1 insertion(+)
drivers/clk/.kunitconfig +0 -0
index 08e26137f3d9..4697bf9fb949 100644

drivers/clk/.kunitconfig line 5

Quoted 5 lines
drivers/clk/.kunitconfig +1 -0
@@ -1,4 +1,5 @@
 CONFIG_KUNIT=y
+CONFIG_KUNIT_UML_PCI=n
 CONFIG_OF=y
 CONFIG_OF_OVERLAY=y
 CONFIG_COMMON_CLK=y

Maybe drop CONFIG_UML_PCI_OVER_VIRTIO=n from the same file?

Thomas