Skip to contentSkip to conversation

net: dummy: align block comment style in dummy.ci

PATCH New dl 1 participant 1 message Nov 29, 2025

Subsystems (2)
lore
Share & tools
lore

dl

author
#0 lore raw

PATCH 1/1 net: dummy: align block comment style in dummy.ci

Fix block comment indentation to follow kernel coding style, aligning each '*' in the header comment.

---
 drivers/net/dummy.c | 56 ++++++++++++++++++++++-----------------------
 1 file changed, 28 insertions(+), 28 deletions(-)
drivers/net/dummy.c +28 -28
index d6bdad4baadd..874e06d5c51f 100644
@@ -1,33 +1,33 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /* dummy.c: a dummy net driver
-
-	The purpose of this driver is to provide a device to point a
-	route through, but not to actually transmit packets.
-
-	Why?  If you have a machine whose only connection is an occasional
-	PPP/SLIP/PLIP link, you can only connect to your own hostname
-	when the link is up.  Otherwise you have to use localhost.
-	This isn't very consistent.
-
-	One solution is to set up a dummy link using PPP/SLIP/PLIP,
-	but this seems (to me) too much overhead for too little gain.
-	This driver provides a small alternative. Thus you can do
-
-	[when not running slip]
-		ifconfig dummy slip.addr.ess.here up
-	[to go to slip]
-		ifconfig dummy down
-		dip whatever
-
-	This was written by looking at Donald Becker's skeleton driver
-	and the loopback driver.  I then threw away anything that didn't
-	apply!	Thanks to Alan Cox for the key clue on what to do with
-	misguided packets.
-
-			Nick Holloway, 27th May 1994
-	[I tweaked this explanation a little but that's all]
-			Alan Cox, 30th May 1994
-*/
+ *
+ *	The purpose of this driver is to provide a device to point a
+ *	route through, but not to actually transmit packets.
+ *
+ *	Why?  If you have a machine whose only connection is an occasional
+ *	PPP/SLIP/PLIP link, you can only connect to your own hostname
+ *	when the link is up.  Otherwise you have to use localhost.
+ *	This isn't very consistent.
+ *
+ *	One solution is to set up a dummy link using PPP/SLIP/PLIP,
+ *	but this seems (to me) too much overhead for too little gain.
+ *	This driver provides a small alternative. Thus you can do
+ *
+ *	[when not running slip]
+ *		ifconfig dummy slip.addr.ess.here up
+ *	[to go to slip]
+ *		ifconfig dummy down
+ *		dip whatever
+ *
+ *	This was written by looking at Donald Becker's skeleton driver
+ *	and the loopback driver.  I then threw away anything that didn't
+ *	apply!	Thanks to Alan Cox for the key clue on what to do with
+ *	misguided packets.
+ *
+ *			Nick Holloway, 27th May 1994
+ *	[I tweaked this explanation a little but that's all]
+ *			Alan Cox, 30th May 1994
+ */
 
 #include <linux/module.h>
 #include <linux/kernel.h>
Signature · 1 line
2.52.0