FAILED: patch "[PATCH] can: rcar_canfd: Fix CAN-FD mode as default" failed to apply to 6.12-stable tree
Subsystems (3)
[email protected]
maintainerThe patch below does not apply to the 6.12-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y
git checkout FETCH_HEAD
git cherry-pick -x 6d849ff573722afcf5508d2800017bdd40f27eb9
# <resolve conflicts, build, test, etc.>
git commit -s
git send-email --to '<[email protected]>' --in-reply-to '2025120155-wrench-aching-b242@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 6d849ff573722afcf5508d2800017bdd40f27eb9 Mon Sep 17 00:00:00 2001
From: Biju Das <[email protected]>
Date: Tue, 18 Nov 2025 12:39:25 +0000
Subject: [PATCH] can: rcar_canfd: Fix CAN-FD mode as default
The commit 5cff263606a1 ("can: rcar_canfd: Fix controller mode setting") has aligned with the flow mentioned in the hardware manual for all SoCs except R-Car Gen3 and RZ/G2L SoCs. On R-Car Gen4 and RZ/G3E SoCs, due to the wrong logic in the commit[1] sets the default mode to FD-Only mode instead of CAN-FD mode.
This patch sets the CAN-FD mode as the default for all SoCs by dropping the rcar_canfd_set_mode() as some SoC requires mode setting in global reset mode, and the rest of the SoCs in channel reset mode and update the rcar_canfd_reset_controller() to take care of these constraints. Moreover, the RZ/G3E and R-Car Gen4 SoCs support 3 modes compared to 2 modes on the R-Car Gen3. Use inverted logic in rcar_canfd_reset_controller() to simplify the code later to support FD-only mode.
[1]
commit 45721c406dcf ("can: rcar_canfd: Add support for r8a779a0 SoC")
drivers/net/can/rcar/rcar_canfd.c +31 -22
@@ -709,6 +709,11 @@ static void rcar_canfd_set_bit_reg(void __iomem *addr, u32 val)rcar_canfd_update (val, val, addr); } +static void rcar_canfd_clear_bit_reg (void __iomem *addr,u32 val) +{ +rcar_canfd_update (val,0 , addr); +} +static void rcar_canfd_update_bit_reg (void __iomem *addr,u32 mask,u32 val) {rcar_canfd_update (mask, val, addr);
@@ -755,25 +760,6 @@ static void rcar_canfd_set_rnc(struct rcar_canfd_global *gpriv, unsigned int ch,rcar_canfd_set_bit (gpriv->base,RCANFD_GAFLCFG (w), rnc); } -static void rcar_canfd_set_mode (struct rcar_canfd_global *gpriv) -{ -if (gpriv->info->ch_interface_mode) { -u32 ch, val = gpriv->fdmode ?RCANFD_GEN4_FDCFG_FDOE - :RCANFD_GEN4_FDCFG_CLOE ; - -for_each_set_bit (ch, &gpriv->channels_mask, - gpriv->info->max_channels) -rcar_canfd_set_bit_reg (&gpriv->fcbase[ch].cfdcfg, val); - }else { -if (gpriv->fdmode) -rcar_canfd_set_bit (gpriv->base,RCANFD_GRMCFG , -RCANFD_GRMCFG_RCMC ); -else -rcar_canfd_clear_bit (gpriv->base,RCANFD_GRMCFG , -RCANFD_GRMCFG_RCMC ); - } -} -static int rcar_canfd_reset_controller (struct rcar_canfd_global *gpriv) {struct device *dev = &gpriv->pdev->dev;
@@ -806,6 +792,16 @@ static int rcar_canfd_reset_controller(struct rcar_canfd_global *gpriv)/* Reset Global error flags */ rcar_canfd_write (gpriv->base,RCANFD_GERFL ,0x0 ); +/* Set the controller into appropriate mode */ +if (!gpriv->info->ch_interface_mode) { +if (gpriv->fdmode) +rcar_canfd_set_bit (gpriv->base,RCANFD_GRMCFG , +RCANFD_GRMCFG_RCMC ); +else +rcar_canfd_clear_bit (gpriv->base,RCANFD_GRMCFG , +RCANFD_GRMCFG_RCMC ); + } +/* Transition all Channels to reset mode */ for_each_set_bit (ch, &gpriv->channels_mask, gpriv->info->max_channels) { rcar_canfd_clear_bit(gpriv->base,
@@ -823,10 +819,23 @@ static int rcar_canfd_reset_controller(struct rcar_canfd_global *gpriv)dev_dbg (dev,"channel %u reset failed\n" , ch);return err; } - } -/* Set the controller into appropriate mode */ -rcar_canfd_set_mode (gpriv); +/* Set the controller into appropriate mode */ +if (gpriv->info->ch_interface_mode) { +/* Do not set CLOE and FDOE simultaneously */ +if (!gpriv->fdmode) { +rcar_canfd_clear_bit_reg (&gpriv->fcbase[ch].cfdcfg, +RCANFD_GEN4_FDCFG_FDOE ); +rcar_canfd_set_bit_reg (&gpriv->fcbase[ch].cfdcfg, +RCANFD_GEN4_FDCFG_CLOE ); + }else { +rcar_canfd_clear_bit_reg (&gpriv->fcbase[ch].cfdcfg, +RCANFD_GEN4_FDCFG_FDOE ); +rcar_canfd_clear_bit_reg (&gpriv->fcbase[ch].cfdcfg, +RCANFD_GEN4_FDCFG_CLOE ); + } + } + }return 0 ; }
Sasha Levin
maintainerPATCH 1/1 can: rcar_canfd: Fix CAN-FD mode as default
From: Biju Das <[email protected]>
[ Upstream commit 6d849ff573722afcf5508d2800017bdd40f27eb9 ]
The commit 5cff263606a1 ("can: rcar_canfd: Fix controller mode setting") has aligned with the flow mentioned in the hardware manual for all SoCs except R-Car Gen3 and RZ/G2L SoCs. On R-Car Gen4 and RZ/G3E SoCs, due to the wrong logic in the commit[1] sets the default mode to FD-Only mode instead of CAN-FD mode.
This patch sets the CAN-FD mode as the default for all SoCs by dropping the rcar_canfd_set_mode() as some SoC requires mode setting in global reset mode, and the rest of the SoCs in channel reset mode and update the rcar_canfd_reset_controller() to take care of these constraints. Moreover, the RZ/G3E and R-Car Gen4 SoCs support 3 modes compared to 2 modes on the R-Car Gen3. Use inverted logic in rcar_canfd_reset_controller() to simplify the code later to support FD-only mode.
[1]
commit 45721c406dcf ("can: rcar_canfd: Add support for r8a779a0 SoC")
--- drivers/net/can/rcar/rcar_canfd.c | 53 +++++++++++++++++-------------- 1 file changed, 30 insertions(+), 23 deletions(-)
drivers/net/can/rcar/rcar_canfd.c +30 -23
@@ -681,26 +681,6 @@ static void rcar_canfd_tx_failure_cleanup(struct net_device *ndev)can_free_echo_skb (ndev, i,NULL ); } -static void rcar_canfd_set_mode (struct rcar_canfd_global *gpriv) -{ -if (is_gen4 (gpriv)) { -u32 ch, val = gpriv->fdmode ?RCANFD_GEN4_FDCFG_FDOE - :RCANFD_GEN4_FDCFG_CLOE ; - -for_each_set_bit (ch, &gpriv->channels_mask, - gpriv->info->max_channels) -rcar_canfd_set_bit (gpriv->base,RCANFD_GEN4_FDCFG (ch), - val); - }else { -if (gpriv->fdmode) -rcar_canfd_set_bit (gpriv->base,RCANFD_GRMCFG , -RCANFD_GRMCFG_RCMC ); -else -rcar_canfd_clear_bit (gpriv->base,RCANFD_GRMCFG , -RCANFD_GRMCFG_RCMC ); - } -} -static int rcar_canfd_reset_controller (struct rcar_canfd_global *gpriv) {u32 sts, ch;
@@ -732,6 +712,16 @@ static int rcar_canfd_reset_controller(struct rcar_canfd_global *gpriv)/* Reset Global error flags */ rcar_canfd_write (gpriv->base,RCANFD_GERFL ,0x0 ); +/* Set the controller into appropriate mode */ +if (!is_gen4 (gpriv)) { +if (gpriv->fdmode) +rcar_canfd_set_bit (gpriv->base,RCANFD_GRMCFG , +RCANFD_GRMCFG_RCMC ); +else +rcar_canfd_clear_bit (gpriv->base,RCANFD_GRMCFG , +RCANFD_GRMCFG_RCMC ); + } +/* Transition all Channels to reset mode */ for_each_set_bit (ch, &gpriv->channels_mask, gpriv->info->max_channels) { rcar_canfd_clear_bit(gpriv->base,
@@ -750,10 +740,27 @@ static int rcar_canfd_reset_controller(struct rcar_canfd_global *gpriv) "channel %u reset failed\n", ch);return err; } - } -/* Set the controller into appropriate mode */ -rcar_canfd_set_mode (gpriv); +/* Set the controller into appropriate mode */ +if (is_gen4 (gpriv)) { +/* Do not set CLOE and FDOE simultaneously */ +if (!gpriv->fdmode) { +rcar_canfd_clear_bit (gpriv->base, +RCANFD_GEN4_FDCFG (ch), +RCANFD_GEN4_FDCFG_FDOE ); +rcar_canfd_set_bit (gpriv->base, +RCANFD_GEN4_FDCFG (ch), +RCANFD_GEN4_FDCFG_CLOE ); + }else { +rcar_canfd_clear_bit (gpriv->base, +RCANFD_GEN4_FDCFG (ch), +RCANFD_GEN4_FDCFG_FDOE ); +rcar_canfd_clear_bit (gpriv->base, +RCANFD_GEN4_FDCFG (ch), +RCANFD_GEN4_FDCFG_CLOE ); + } + } + }return 0 ; }
Signature · 1 line
2.51.0