Skip to contentSkip to conversation

nvme: Let the blocklayer set timeouts for requests

PATCH Superseded Heyne, Maximilian 2 participants 3 messages Dec 2, 2025 NVMe

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 nvme: Let the blocklayer set timeouts for requests

When initializing an nvme request which is about to be send to the block layer, we do not need to initialize its timeout. If it's left uninitialized at 0 the block layer will use the request queue's timeout in blk_add_timer (via nvme_start_request which is called from nvme_*_queue_rq). These timeouts are setup to either NVME_IO_TIMEOUT or NVME_ADMIN_TIMEOUT when the request queues were created.

Because the io_timeout of the IO queues can actually be modified via sysfs, the following situation can occur:

1) NVME_IO_TIMEOUT = 30 (default module parameter)
2) nvme1n1 is probed. IO queues default timeout is 30 s
3) manually change the IO timeout to 90 s
echo 90000 > /sys/class/nvme/nvme1/nvme1n1/queue/io_timeout
4) nvme zns report-zones /dev/nvme1n1
This command issues IO commands with timeout 30 s instead of the wanted 90 s which might be more suitable for this device.

This patch, therefore, improves the consistency of IO timeout usage. However, there are still uses of NVME_IO_TIMEOUT which could be inconsistent with what is set in the device's request_queue by the user.

---
 drivers/nvme/host/core.c | 2 --
 1 file changed, 2 deletions(-)
drivers/nvme/host/core.c +0 -2
index f1f719351f3f2..3a6d74e6dae11 100644
@@ -724,10 +724,8 @@ void nvme_init_request(struct request *req, struct nvme_command *cmd)
 		struct nvme_ns *ns = req->q->disk->private_data;
 
 		logging_enabled = ns->head->passthru_err_log_enabled;
-		req->timeout = NVME_IO_TIMEOUT;
 	} else { /* no queuedata implies admin queue */
 		logging_enabled = nr->ctrl->passthru_err_log_enabled;
-		req->timeout = NVME_ADMIN_TIMEOUT;
 	}
 
 	if (!logging_enabled)
Signature · 12 lines
2.47.3




Amazon Web Services Development Center Germany GmbH
Tamara-Danz-Str. 13
10243 Berlin
Geschaeftsfuehrung: Christian Schlaeger, Christof Hellmis
Eingetragen am Amtsgericht Charlottenburg unter HRB 257764 B
Sitz: Berlin
Ust-ID: DE 365 538 597
maintainer
#1 lore raw
Quoted 10 lines · Maximilian

When initializing an nvme request which is about to be send to the block layer, we do not need to initialize its timeout. If it's left uninitialized at 0 the block layer will use the request queue's timeout in blk_add_timer (via nvme_start_request which is called from nvme_*_queue_rq). These timeouts are setup to either NVME_IO_TIMEOUT or NVME_ADMIN_TIMEOUT when the request queues were created.

Because the io_timeout of the IO queues can actually be modified via sysfs, the following situation can occur:

Quoted 7 lines

1) NVME_IO_TIMEOUT = 30 (default module parameter)
2) nvme1n1 is probed. IO queues default timeout is 30 s
3) manually change the IO timeout to 90 s
echo 90000 > /sys/class/nvme/nvme1/nvme1n1/queue/io_timeout
4) nvme zns report-zones /dev/nvme1n1
This command issues IO commands with timeout 30 s instead of the wanted 90 s which might be more suitable for this device.

Does this example really use 30s, though? User space commands should be going through nvme_submit_user_cmd(), which overrides the timeout set from the nvme_init_request with whatever the user requested (usually 0).

The code change looks fine, though.

#2 lore raw
Quoted 19 lines · Keith Busch
Quoted 10 lines · Maximilian

When initializing an nvme request which is about to be send to the block layer, we do not need to initialize its timeout. If it's left uninitialized at 0 the block layer will use the request queue's timeout in blk_add_timer (via nvme_start_request which is called from nvme_*_queue_rq). These timeouts are setup to either NVME_IO_TIMEOUT or NVME_ADMIN_TIMEOUT when the request queues were created.

Because the io_timeout of the IO queues can actually be modified via sysfs, the following situation can occur:

Quoted 7 lines

1) NVME_IO_TIMEOUT = 30 (default module parameter)
2) nvme1n1 is probed. IO queues default timeout is 30 s
3) manually change the IO timeout to 90 s
echo 90000 > /sys/class/nvme/nvme1/nvme1n1/queue/io_timeout
4) nvme zns report-zones /dev/nvme1n1
This command issues IO commands with timeout 30 s instead of the wanted 90 s which might be more suitable for this device.

Quoted 3 lines

Does this example really use 30s, though? User space commands should be going through nvme_submit_user_cmd(), which overrides the timeout set from the nvme_init_request with whatever the user requested (usually 0).

You're right. I actually worked on multiple (older) kernel versions and forgot about this case. It was actually commit 470e900c8036ff ("nvme:
refactor nvme_alloc_request") which subtly changed the behavior but only for the ioctl case. So ioctl's are fine then but, for example, everything which goes via nvme_submit_sync_cmd shows the issue. So we need to update the commit message accordingly. Sorry for that. I'll give it a day or two for further comments on this patch and then send it with a more correct message.

Amazon Web Services Development Center Germany GmbH Tamara-Danz-Str. 13
10243 Berlin
Geschaeftsfuehrung: Christian Schlaeger, Christof Hellmis Eingetragen am Amtsgericht Charlottenburg unter HRB 257764 B
Sitz: Berlin
Ust-ID: DE 365 538 597